ARM: dts: qcom: msm8660: split PMIC to separate dtsi files
The PMIC is not a part of the SoC, so move PMIC to a separate file and include it from the board files. Suggested-by: Konrad Dybcio <konrad.dybcio@linaro.org> Acked-by: Konrad Dybcio <konrad.dybcio@linaro.org> Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Link: https://lore.kernel.org/r/20230928110309.1212221-20-dmitry.baryshkov@linaro.org Signed-off-by: Bjorn Andersson <andersson@kernel.org>
This commit is contained in:
Dmitry Baryshkov
Bjorn Andersson
parent
e929715022
commit
b00c86c2e9
160
arch/arm/boot/dts/qcom/pm8058.dtsi
Normal file
160
arch/arm/boot/dts/qcom/pm8058.dtsi
Normal file
@ -0,0 +1,160 @@
|
||||
// SPDX-License-Identifier: GPL-2.0
|
||||
|
||||
&ssbi {
|
||||
pm8058: pmic {
|
||||
compatible = "qcom,pm8058";
|
||||
#interrupt-cells = <2>;
|
||||
interrupt-controller;
|
||||
#address-cells = <1>;
|
||||
#size-cells = <0>;
|
||||
|
||||
pm8058_gpio: gpio@150 {
|
||||
compatible = "qcom,pm8058-gpio",
|
||||
"qcom,ssbi-gpio";
|
||||
reg = <0x150>;
|
||||
interrupt-controller;
|
||||
#interrupt-cells = <2>;
|
||||
gpio-controller;
|
||||
gpio-ranges = <&pm8058_gpio 0 0 44>;
|
||||
#gpio-cells = <2>;
|
||||
};
|
||||
|
||||
pm8058_mpps: mpps@50 {
|
||||
compatible = "qcom,pm8058-mpp",
|
||||
"qcom,ssbi-mpp";
|
||||
reg = <0x50>;
|
||||
gpio-controller;
|
||||
#gpio-cells = <2>;
|
||||
gpio-ranges = <&pm8058_mpps 0 0 12>;
|
||||
interrupt-controller;
|
||||
#interrupt-cells = <2>;
|
||||
};
|
||||
|
||||
pwrkey@1c {
|
||||
compatible = "qcom,pm8058-pwrkey";
|
||||
reg = <0x1c>;
|
||||
interrupt-parent = <&pm8058>;
|
||||
interrupts = <50 1>, <51 1>;
|
||||
debounce = <15625>;
|
||||
pull-up;
|
||||
};
|
||||
|
||||
pm8058_keypad: keypad@148 {
|
||||
compatible = "qcom,pm8058-keypad";
|
||||
reg = <0x148>;
|
||||
interrupt-parent = <&pm8058>;
|
||||
interrupts = <74 1>, <75 1>;
|
||||
debounce = <15>;
|
||||
scan-delay = <32>;
|
||||
row-hold = <91500>;
|
||||
};
|
||||
|
||||
pm8058_xoadc: xoadc@197 {
|
||||
compatible = "qcom,pm8058-adc";
|
||||
reg = <0x197>;
|
||||
interrupts-extended = <&pm8058 76 IRQ_TYPE_EDGE_RISING>;
|
||||
#address-cells = <2>;
|
||||
#size-cells = <0>;
|
||||
#io-channel-cells = <2>;
|
||||
|
||||
vcoin: adc-channel@0 {
|
||||
reg = <0x00 0x00>;
|
||||
};
|
||||
|
||||
vbat: adc-channel@1 {
|
||||
reg = <0x00 0x01>;
|
||||
};
|
||||
|
||||
dcin: adc-channel@2 {
|
||||
reg = <0x00 0x02>;
|
||||
};
|
||||
|
||||
ichg: adc-channel@3 {
|
||||
reg = <0x00 0x03>;
|
||||
};
|
||||
|
||||
vph_pwr: adc-channel@4 {
|
||||
reg = <0x00 0x04>;
|
||||
};
|
||||
|
||||
usb_vbus: adc-channel@a {
|
||||
reg = <0x00 0x0a>;
|
||||
};
|
||||
|
||||
die_temp: adc-channel@b {
|
||||
reg = <0x00 0x0b>;
|
||||
};
|
||||
|
||||
ref_625mv: adc-channel@c {
|
||||
reg = <0x00 0x0c>;
|
||||
};
|
||||
|
||||
ref_1250mv: adc-channel@d {
|
||||
reg = <0x00 0x0d>;
|
||||
};
|
||||
|
||||
ref_325mv: adc-channel@e {
|
||||
reg = <0x00 0x0e>;
|
||||
};
|
||||
|
||||
ref_muxoff: adc-channel@f {
|
||||
reg = <0x00 0x0f>;
|
||||
};
|
||||
};
|
||||
|
||||
rtc@1e8 {
|
||||
compatible = "qcom,pm8058-rtc";
|
||||
reg = <0x1e8>;
|
||||
interrupt-parent = <&pm8058>;
|
||||
interrupts = <39 1>;
|
||||
allow-set-time;
|
||||
};
|
||||
|
||||
vibrator@4a {
|
||||
compatible = "qcom,pm8058-vib";
|
||||
reg = <0x4a>;
|
||||
};
|
||||
|
||||
pm8058_led48: led@48 {
|
||||
compatible = "qcom,pm8058-keypad-led";
|
||||
reg = <0x48>;
|
||||
status = "disabled";
|
||||
};
|
||||
|
||||
pm8058_led131: led@131 {
|
||||
compatible = "qcom,pm8058-led";
|
||||
reg = <0x131>;
|
||||
status = "disabled";
|
||||
};
|
||||
|
||||
pm8058_led132: led@132 {
|
||||
compatible = "qcom,pm8058-led";
|
||||
reg = <0x132>;
|
||||
status = "disabled";
|
||||
};
|
||||
|
||||
pm8058_led133: led@133 {
|
||||
compatible = "qcom,pm8058-led";
|
||||
reg = <0x133>;
|
||||
status = "disabled";
|
||||
};
|
||||
};
|
||||
};
|
||||
|
||||
/ {
|
||||
/*
|
||||
* These channels from the ADC are simply hardware monitors.
|
||||
* That is why the ADC is referred to as "HKADC" - HouseKeeping
|
||||
* ADC.
|
||||
*/
|
||||
iio-hwmon {
|
||||
compatible = "iio-hwmon";
|
||||
io-channels = <&pm8058_xoadc 0x00 0x01>, /* Battery */
|
||||
<&pm8058_xoadc 0x00 0x02>, /* DC in (charger) */
|
||||
<&pm8058_xoadc 0x00 0x04>, /* VPH the main system voltage */
|
||||
<&pm8058_xoadc 0x00 0x0b>, /* Die temperature */
|
||||
<&pm8058_xoadc 0x00 0x0c>, /* Reference voltage 1.25V */
|
||||
<&pm8058_xoadc 0x00 0x0d>, /* Reference voltage 0.625V */
|
||||
<&pm8058_xoadc 0x00 0x0e>; /* Reference voltage 0.325V */
|
||||
};
|
||||
};
|
||||
@ -5,6 +5,7 @@
|
||||
#include <dt-bindings/pinctrl/qcom,pmic-gpio.h>
|
||||
#include <dt-bindings/pinctrl/qcom,pmic-mpp.h>
|
||||
#include "qcom-msm8660.dtsi"
|
||||
#include "pm8058.dtsi"
|
||||
|
||||
/ {
|
||||
model = "Qualcomm APQ8060 Dragonboard";
|
||||
|
||||
@ -2,6 +2,7 @@
|
||||
#include <dt-bindings/input/input.h>
|
||||
|
||||
#include "qcom-msm8660.dtsi"
|
||||
#include "pm8058.dtsi"
|
||||
|
||||
/ {
|
||||
model = "Qualcomm MSM8660 SURF";
|
||||
|
||||
@ -73,22 +73,6 @@
|
||||
};
|
||||
};
|
||||
|
||||
/*
|
||||
* These channels from the ADC are simply hardware monitors.
|
||||
* That is why the ADC is referred to as "HKADC" - HouseKeeping
|
||||
* ADC.
|
||||
*/
|
||||
iio-hwmon {
|
||||
compatible = "iio-hwmon";
|
||||
io-channels = <&pm8058_xoadc 0x00 0x01>, /* Battery */
|
||||
<&pm8058_xoadc 0x00 0x02>, /* DC in (charger) */
|
||||
<&pm8058_xoadc 0x00 0x04>, /* VPH the main system voltage */
|
||||
<&pm8058_xoadc 0x00 0x0b>, /* Die temperature */
|
||||
<&pm8058_xoadc 0x00 0x0c>, /* Reference voltage 1.25V */
|
||||
<&pm8058_xoadc 0x00 0x0d>, /* Reference voltage 0.625V */
|
||||
<&pm8058_xoadc 0x00 0x0e>; /* Reference voltage 0.325V */
|
||||
};
|
||||
|
||||
soc: soc {
|
||||
#address-cells = <1>;
|
||||
#size-cells = <1>;
|
||||
@ -334,141 +318,10 @@
|
||||
status = "disabled";
|
||||
};
|
||||
|
||||
ssbi@500000 {
|
||||
ssbi: ssbi@500000 {
|
||||
compatible = "qcom,ssbi";
|
||||
reg = <0x500000 0x1000>;
|
||||
qcom,controller-type = "pmic-arbiter";
|
||||
|
||||
pm8058: pmic {
|
||||
compatible = "qcom,pm8058";
|
||||
#interrupt-cells = <2>;
|
||||
interrupt-controller;
|
||||
#address-cells = <1>;
|
||||
#size-cells = <0>;
|
||||
|
||||
pm8058_gpio: gpio@150 {
|
||||
compatible = "qcom,pm8058-gpio",
|
||||
"qcom,ssbi-gpio";
|
||||
reg = <0x150>;
|
||||
interrupt-controller;
|
||||
#interrupt-cells = <2>;
|
||||
gpio-controller;
|
||||
gpio-ranges = <&pm8058_gpio 0 0 44>;
|
||||
#gpio-cells = <2>;
|
||||
|
||||
};
|
||||
|
||||
pm8058_mpps: mpps@50 {
|
||||
compatible = "qcom,pm8058-mpp",
|
||||
"qcom,ssbi-mpp";
|
||||
reg = <0x50>;
|
||||
gpio-controller;
|
||||
#gpio-cells = <2>;
|
||||
gpio-ranges = <&pm8058_mpps 0 0 12>;
|
||||
interrupt-controller;
|
||||
#interrupt-cells = <2>;
|
||||
};
|
||||
|
||||
pwrkey@1c {
|
||||
compatible = "qcom,pm8058-pwrkey";
|
||||
reg = <0x1c>;
|
||||
interrupt-parent = <&pm8058>;
|
||||
interrupts = <50 1>, <51 1>;
|
||||
debounce = <15625>;
|
||||
pull-up;
|
||||
};
|
||||
|
||||
pm8058_keypad: keypad@148 {
|
||||
compatible = "qcom,pm8058-keypad";
|
||||
reg = <0x148>;
|
||||
interrupt-parent = <&pm8058>;
|
||||
interrupts = <74 1>, <75 1>;
|
||||
debounce = <15>;
|
||||
scan-delay = <32>;
|
||||
row-hold = <91500>;
|
||||
};
|
||||
|
||||
pm8058_xoadc: xoadc@197 {
|
||||
compatible = "qcom,pm8058-adc";
|
||||
reg = <0x197>;
|
||||
interrupts-extended = <&pm8058 76 IRQ_TYPE_EDGE_RISING>;
|
||||
#address-cells = <2>;
|
||||
#size-cells = <0>;
|
||||
#io-channel-cells = <2>;
|
||||
|
||||
vcoin: adc-channel@0 {
|
||||
reg = <0x00 0x00>;
|
||||
};
|
||||
vbat: adc-channel@1 {
|
||||
reg = <0x00 0x01>;
|
||||
};
|
||||
dcin: adc-channel@2 {
|
||||
reg = <0x00 0x02>;
|
||||
};
|
||||
ichg: adc-channel@3 {
|
||||
reg = <0x00 0x03>;
|
||||
};
|
||||
vph_pwr: adc-channel@4 {
|
||||
reg = <0x00 0x04>;
|
||||
};
|
||||
usb_vbus: adc-channel@a {
|
||||
reg = <0x00 0x0a>;
|
||||
};
|
||||
die_temp: adc-channel@b {
|
||||
reg = <0x00 0x0b>;
|
||||
};
|
||||
ref_625mv: adc-channel@c {
|
||||
reg = <0x00 0x0c>;
|
||||
};
|
||||
ref_1250mv: adc-channel@d {
|
||||
reg = <0x00 0x0d>;
|
||||
};
|
||||
ref_325mv: adc-channel@e {
|
||||
reg = <0x00 0x0e>;
|
||||
};
|
||||
ref_muxoff: adc-channel@f {
|
||||
reg = <0x00 0x0f>;
|
||||
};
|
||||
};
|
||||
|
||||
rtc@1e8 {
|
||||
compatible = "qcom,pm8058-rtc";
|
||||
reg = <0x1e8>;
|
||||
interrupt-parent = <&pm8058>;
|
||||
interrupts = <39 1>;
|
||||
allow-set-time;
|
||||
};
|
||||
|
||||
vibrator@4a {
|
||||
compatible = "qcom,pm8058-vib";
|
||||
reg = <0x4a>;
|
||||
};
|
||||
|
||||
pm8058_led48: led@48 {
|
||||
compatible = "qcom,pm8058-keypad-led";
|
||||
reg = <0x48>;
|
||||
status = "disabled";
|
||||
};
|
||||
|
||||
pm8058_led131: led@131 {
|
||||
compatible = "qcom,pm8058-led";
|
||||
reg = <0x131>;
|
||||
status = "disabled";
|
||||
};
|
||||
|
||||
pm8058_led132: led@132 {
|
||||
compatible = "qcom,pm8058-led";
|
||||
reg = <0x132>;
|
||||
status = "disabled";
|
||||
};
|
||||
|
||||
pm8058_led133: led@133 {
|
||||
compatible = "qcom,pm8058-led";
|
||||
reg = <0x133>;
|
||||
status = "disabled";
|
||||
};
|
||||
|
||||
};
|
||||
};
|
||||
|
||||
l2cc: clock-controller@2082000 {
|
||||
|
||||
Loading…
x
Reference in New Issue
Block a user