iv/linux
1
0
Fork 0
Code Issues Pull Requests Actions Packages Projects Releases Wiki Activity

m68k: mac: Avoid stuck ISM IOP interrupt on Quadra 900/950

Browse Source 
On a Quadra 900/950, the ISM IOP IRQ output pin is connected to an
edge-triggered input on VIA2. It is theoretically possible that this
signal could fail to produce the expected VIA2 interrupt.

The two IOP interrupt flags can be asserted in any order but the logic
in iop_ism_irq() does not allow for that. In particular, INT0 can be
asserted right after INT0 is checked and before INT1 is cleared.

Such an interrupt would produce no new edge and VIA2 would detect no
further interrupts from the IOP. Avoid this by looping over the INT0/1
handlers so an edge can be produced.

Signed-off-by: Finn Thain <fthain@telegraphics.com.au>
Tested-by: Stan Johnson <userm57@yahoo.com>
Cc: Joshua Thompson <funaho@jurai.org>
Link: https://lore.kernel.org/r/bfbb71db52c5e162d3afa25a28fc5d535ca87138.1589949122.git.fthain@telegraphics.com.au
Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org>
This commit is contained in:
Finn Thain 2020-05-20 14:32:02 +10:00 committed by Geert Uytterhoeven
parent bf6c68ead3
commit b2003c7a81
1 changed files with 28 additions and 22 deletions
Show Stats Download Patch File Download Diff File Expand all files Collapse all files

26
arch/m68k/mac/iop.c
View File

@ -565,36 +565,42 @@ irqreturn_t iop_ism_irq(int irq, void *dev_id)
uint iop_num = (uint) dev_id;
volatile struct mac_iop *iop = iop_base[iop_num];
int i,state;
u8 events = iop->status_ctrl & (IOP_INT0 | IOP_INT1);
iop_pr_debug("status %02X\n", iop->status_ctrl);
/* INT0 indicates a state change on an outgoing message channel */
if (iop->status_ctrl & IOP_INT0) {
do {
/* INT0 indicates state change on an outgoing message channel */
if (events & IOP_INT0) {
iop->status_ctrl = IOP_INT0 | IOP_RUN | IOP_AUTOINC;
iop_pr_debug("new status %02X, send states", iop->status_ctrl);
iop_pr_debug("new status %02X, send states",
iop->status_ctrl);
for (i = 0; i < NUM_IOP_CHAN; i++) {
state = iop_readb(iop, IOP_ADDR_SEND_STATE + i);
iop_pr_cont(" %02X", state);
if (state == IOP_MSG_COMPLETE) {
if (state == IOP_MSG_COMPLETE)
iop_handle_send(iop_num, i);
}
}
iop_pr_cont("\n");
}
if (iop->status_ctrl & IOP_INT1) { /* INT1 for incoming msgs */
/* INT1 for incoming messages */
if (events & IOP_INT1) {
iop->status_ctrl = IOP_INT1 | IOP_RUN | IOP_AUTOINC;
iop_pr_debug("new status %02X, recv states", iop->status_ctrl);
iop_pr_debug("new status %02X, recv states",
iop->status_ctrl);
for (i = 0; i < NUM_IOP_CHAN; i++) {
state = iop_readb(iop, IOP_ADDR_RECV_STATE + i);
iop_pr_cont(" %02X", state);
if (state == IOP_MSG_NEW) {
if (state == IOP_MSG_NEW)
iop_handle_recv(iop_num, i);
}
}
iop_pr_cont("\n");
}
events = iop->status_ctrl & (IOP_INT0 | IOP_INT1);
} while (events);
return IRQ_HANDLED;
}