i2c: xiic: Add timeout to the rx fifo wait loop
Add timeout to the rx fifo empty wait loop. Also check for the return value for xiic_reinit and pass it to xiic_start_xfer. Signed-off-by: Shubhrajyoti Datta <shubhrajyoti.datta@xilinx.com> Signed-off-by: Michal Simek <michal.simek@xilinx.com> Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
This commit is contained in:
parent
40b2ec1251
commit
b4c119dbc3
@ -156,6 +156,8 @@ struct xiic_i2c {
|
||||
#define XIIC_RESET_MASK 0xAUL
|
||||
|
||||
#define XIIC_PM_TIMEOUT 1000 /* ms */
|
||||
/* timeout waiting for the controller to respond */
|
||||
#define XIIC_I2C_TIMEOUT (msecs_to_jiffies(1000))
|
||||
/*
|
||||
* The following constant is used for the device global interrupt enable
|
||||
* register, to enable all interrupts for the device, this is the only bit
|
||||
@ -166,7 +168,7 @@ struct xiic_i2c {
|
||||
#define xiic_tx_space(i2c) ((i2c)->tx_msg->len - (i2c)->tx_pos)
|
||||
#define xiic_rx_space(i2c) ((i2c)->rx_msg->len - (i2c)->rx_pos)
|
||||
|
||||
static void xiic_start_xfer(struct xiic_i2c *i2c);
|
||||
static int xiic_start_xfer(struct xiic_i2c *i2c);
|
||||
static void __xiic_start_xfer(struct xiic_i2c *i2c);
|
||||
|
||||
/*
|
||||
@ -247,17 +249,29 @@ static inline void xiic_irq_clr_en(struct xiic_i2c *i2c, u32 mask)
|
||||
xiic_irq_en(i2c, mask);
|
||||
}
|
||||
|
||||
static void xiic_clear_rx_fifo(struct xiic_i2c *i2c)
|
||||
static int xiic_clear_rx_fifo(struct xiic_i2c *i2c)
|
||||
{
|
||||
u8 sr;
|
||||
unsigned long timeout;
|
||||
|
||||
timeout = jiffies + XIIC_I2C_TIMEOUT;
|
||||
for (sr = xiic_getreg8(i2c, XIIC_SR_REG_OFFSET);
|
||||
!(sr & XIIC_SR_RX_FIFO_EMPTY_MASK);
|
||||
sr = xiic_getreg8(i2c, XIIC_SR_REG_OFFSET))
|
||||
sr = xiic_getreg8(i2c, XIIC_SR_REG_OFFSET)) {
|
||||
xiic_getreg8(i2c, XIIC_DRR_REG_OFFSET);
|
||||
if (time_after(jiffies, timeout)) {
|
||||
dev_err(i2c->dev, "Failed to clear rx fifo\n");
|
||||
return -ETIMEDOUT;
|
||||
}
|
||||
}
|
||||
|
||||
return 0;
|
||||
}
|
||||
|
||||
static void xiic_reinit(struct xiic_i2c *i2c)
|
||||
static int xiic_reinit(struct xiic_i2c *i2c)
|
||||
{
|
||||
int ret;
|
||||
|
||||
xiic_setreg32(i2c, XIIC_RESETR_OFFSET, XIIC_RESET_MASK);
|
||||
|
||||
/* Set receive Fifo depth to maximum (zero based). */
|
||||
@ -270,12 +284,16 @@ static void xiic_reinit(struct xiic_i2c *i2c)
|
||||
xiic_setreg8(i2c, XIIC_CR_REG_OFFSET, XIIC_CR_ENABLE_DEVICE_MASK);
|
||||
|
||||
/* make sure RX fifo is empty */
|
||||
xiic_clear_rx_fifo(i2c);
|
||||
ret = xiic_clear_rx_fifo(i2c);
|
||||
if (ret)
|
||||
return ret;
|
||||
|
||||
/* Enable interrupts */
|
||||
xiic_setreg32(i2c, XIIC_DGIER_OFFSET, XIIC_GINTR_ENABLE_MASK);
|
||||
|
||||
xiic_irq_clr_en(i2c, XIIC_INTR_ARB_LOST_MASK);
|
||||
|
||||
return 0;
|
||||
}
|
||||
|
||||
static void xiic_deinit(struct xiic_i2c *i2c)
|
||||
@ -655,12 +673,18 @@ static void __xiic_start_xfer(struct xiic_i2c *i2c)
|
||||
|
||||
}
|
||||
|
||||
static void xiic_start_xfer(struct xiic_i2c *i2c)
|
||||
static int xiic_start_xfer(struct xiic_i2c *i2c)
|
||||
{
|
||||
int ret;
|
||||
mutex_lock(&i2c->lock);
|
||||
xiic_reinit(i2c);
|
||||
__xiic_start_xfer(i2c);
|
||||
|
||||
ret = xiic_reinit(i2c);
|
||||
if (!ret)
|
||||
__xiic_start_xfer(i2c);
|
||||
|
||||
mutex_unlock(&i2c->lock);
|
||||
|
||||
return ret;
|
||||
}
|
||||
|
||||
static int xiic_xfer(struct i2c_adapter *adap, struct i2c_msg *msgs, int num)
|
||||
@ -682,7 +706,11 @@ static int xiic_xfer(struct i2c_adapter *adap, struct i2c_msg *msgs, int num)
|
||||
i2c->tx_msg = msgs;
|
||||
i2c->nmsgs = num;
|
||||
|
||||
xiic_start_xfer(i2c);
|
||||
err = xiic_start_xfer(i2c);
|
||||
if (err < 0) {
|
||||
dev_err(adap->dev.parent, "Error xiic_start_xfer\n");
|
||||
goto out;
|
||||
}
|
||||
|
||||
if (wait_event_timeout(i2c->wait, (i2c->state == STATE_ERROR) ||
|
||||
(i2c->state == STATE_DONE), HZ)) {
|
||||
@ -794,7 +822,11 @@ static int xiic_i2c_probe(struct platform_device *pdev)
|
||||
if (!(sr & XIIC_SR_TX_FIFO_EMPTY_MASK))
|
||||
i2c->endianness = BIG;
|
||||
|
||||
xiic_reinit(i2c);
|
||||
ret = xiic_reinit(i2c);
|
||||
if (ret < 0) {
|
||||
dev_err(&pdev->dev, "Cannot xiic_reinit\n");
|
||||
goto err_clk_dis;
|
||||
}
|
||||
|
||||
/* add i2c adapter to i2c tree */
|
||||
ret = i2c_add_adapter(&i2c->adap);
|
||||
|
Loading…
Reference in New Issue
Block a user