iv/linux
1
0
Fork 0
Code Issues Pull Requests Actions Packages Projects Releases Wiki Activity

ARM: dts: sun6i: hummingbird: Enable the onboard WiFi module

Browse Source 
The Hummingbird A31 has an AMPAK AP6210 WiFi+Bluetooth module. The
WiFi part is a BCM43362 IC connected to MMC1 in the A31 SoC via SDIO.
The IC also takes a power enable signal via GPIO. This is supported
with the new power sequencing bindings.

The WiFi module supports out-of-band interrupt signaling via GPIO,
but this is not enabled yet.

Signed-off-by: Chen-Yu Tsai <wens@csie.org>
Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
This commit is contained in:
Chen-Yu Tsai
2015-03-10 19:59:24 +08:00
committed by Maxime Ripard
parent 878c4ded1f
commit b5c26d66a4
1 changed files with 22 additions and 0 deletions
Download Patch File Download Diff File Expand all files Collapse all files

22
arch/arm/boot/dts/sun6i-a31-hummingbird.dts
View File

@ -61,6 +61,11 @@
chosen { chosen {
bootargs = "earlyprintk console=ttyS0,115200"; bootargs = "earlyprintk console=ttyS0,115200";
}; };
wifi_pwrseq: wifi_pwrseq {
compatible = "mmc-pwrseq-simple";
reset-gpios = <&pio 6 10 GPIO_ACTIVE_LOW>; /* PG10 */
};
}; };
&ehci0 { &ehci0 {
@ -127,6 +132,16 @@
allwinner,pull = <SUN4I_PINCTRL_PULL_UP>; allwinner,pull = <SUN4I_PINCTRL_PULL_UP>;
}; };
&mmc1 {
pinctrl-names = "default";
pinctrl-0 = <&mmc1_pins_a>, <&wifi_reset_pin_hummingbird>;
vmmc-supply = <&vcc_wifi>;
mmc-pwrseq = <&wifi_pwrseq>;
bus-width = <4>;
non-removable;
status = "okay";
};
&ohci0 { &ohci0 {
status = "okay"; status = "okay";
}; };
@ -138,6 +153,13 @@
allwinner,drive = <SUN4I_PINCTRL_10_MA>; allwinner,drive = <SUN4I_PINCTRL_10_MA>;
allwinner,pull = <SUN4I_PINCTRL_PULL_UP>; allwinner,pull = <SUN4I_PINCTRL_PULL_UP>;
}; };
wifi_reset_pin_hummingbird: wifi_reset_pin@0 {
allwinner,pins = "PG10";
allwinner,function = "gpio_out";
allwinner,drive = <SUN4I_PINCTRL_10_MA>;
allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
};
}; };
&p2wi { &p2wi {