Merge remote-tracking branch 'spi/topic/rspi' into spi-pdata

Conflicts:
	drivers/spi/spi-rspi.c

Documentation/ABI/testing/sysfs-driver-xen-blkback

@@ -0,0 +1,17 @@
+What:           /sys/module/xen_blkback/parameters/max_buffer_pages
+Date:           March 2013
+KernelVersion:  3.11
+Contact:        Roger Pau Monné <roger.pau@citrix.com>
+Description:
+                Maximum number of free pages to keep in each block
+                backend buffer.
+
+What:           /sys/module/xen_blkback/parameters/max_persistent_grants
+Date:           March 2013
+KernelVersion:  3.11
+Contact:        Roger Pau Monné <roger.pau@citrix.com>
+Description:
+                Maximum number of grants to map persistently in
+                blkback. If the frontend tries to use more than
+                max_persistent_grants, the LRU kicks in and starts
+                removing 5% of max_persistent_grants every 100ms.

Documentation/ABI/testing/sysfs-driver-xen-blkfront

@@ -0,0 +1,10 @@
+What:           /sys/module/xen_blkfront/parameters/max
+Date:           June 2013
+KernelVersion:  3.11
+Contact:        Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
+Description:
+                Maximum number of segments that the frontend will negotiate
+                with the backend for indirect descriptors. The default value
+                is 32 - higher value means more potential throughput but more
+                memory usage. The backend picks the minimum of the frontend
+                and its default backend value.

Documentation/bcache.txt

@@ -46,29 +46,33 @@ you format your backing devices and cache device at the same time, you won't
 have to manually attach:
   make-bcache -B /dev/sda /dev/sdb -C /dev/sdc
 
-To make bcache devices known to the kernel, echo them to /sys/fs/bcache/register:
+bcache-tools now ships udev rules, and bcache devices are known to the kernel
+immediately.  Without udev, you can manually register devices like this:
 
   echo /dev/sdb > /sys/fs/bcache/register
   echo /dev/sdc > /sys/fs/bcache/register
 
-To register your bcache devices automatically, you could add something like
+Registering the backing device makes the bcache device show up in /dev; you can
-this to an init script:
+now format it and use it as normal. But the first time using a new bcache
+device, it'll be running in passthrough mode until you attach it to a cache.
+See the section on attaching.
 
-  echo /dev/sd* > /sys/fs/bcache/register_quiet
+The devices show up as:
 
-It'll look for bcache superblocks and ignore everything that doesn't have one.
+  /dev/bcache<N>
 
-Registering the backing device makes the bcache show up in /dev; you can now
+As well as (with udev):
-format it and use it as normal. But the first time using a new bcache device,
-it'll be running in passthrough mode until you attach it to a cache. See the
-section on attaching.
 
-The devices show up at /dev/bcacheN, and can be controlled via sysfs from
+  /dev/bcache/by-uuid/<uuid>
-/sys/block/bcacheN/bcache:
+  /dev/bcache/by-label/<label>
+
+To get started:
 
   mkfs.ext4 /dev/bcache0
   mount /dev/bcache0 /mnt
 
+You can control bcache devices through sysfs at /sys/block/bcache<N>/bcache .
+
 Cache devices are managed as sets; multiple caches per set isn't supported yet
 but will allow for mirroring of metadata and dirty data in the future. Your new
 cache set shows up as /sys/fs/bcache/<UUID>
@@ -80,11 +84,11 @@ must be attached to your cache set to enable caching. Attaching a backing
 device to a cache set is done thusly, with the UUID of the cache set in
 /sys/fs/bcache:
 
-  echo <UUID> > /sys/block/bcache0/bcache/attach
+  echo <CSET-UUID> > /sys/block/bcache0/bcache/attach
 
 This only has to be done once. The next time you reboot, just reregister all
 your bcache devices. If a backing device has data in a cache somewhere, the
-/dev/bcache# device won't be created until the cache shows up - particularly
+/dev/bcache<N> device won't be created until the cache shows up - particularly
 important if you have writeback caching turned on.
 
 If you're booting up and your cache device is gone and never coming back, you
@@ -191,6 +195,9 @@ want for getting the best possible numbers when benchmarking.
 
 SYSFS - BACKING DEVICE:
 
+Available at /sys/block/<bdev>/bcache, /sys/block/bcache*/bcache and
+(if attached) /sys/fs/bcache/<cset-uuid>/bdev*
+
 attach
   Echo the UUID of a cache set to this file to enable caching.
 
@@ -300,6 +307,8 @@ cache_readaheads
 
 SYSFS - CACHE SET:
 
+Available at /sys/fs/bcache/<cset-uuid>
+
 average_key_size
   Average data per key in the btree.
 
@@ -390,6 +399,8 @@ trigger_gc
 
 SYSFS - CACHE DEVICE:
 
+Available at /sys/block/<cdev>/bcache
+
 block_size
   Minimum granularity of writes - should match hardware sector size.
 

Documentation/cpu-hotplug.txt

@@ -267,8 +267,8 @@ Q: If i have some kernel code that needs to be aware of CPU arrival and
 A: This is what you would need in your kernel code to receive notifications.
 
 	#include <linux/cpu.h>
-	static int __cpuinit foobar_cpu_callback(struct notifier_block *nfb,
+	static int foobar_cpu_callback(struct notifier_block *nfb,
-					    unsigned long action, void *hcpu)
+				       unsigned long action, void *hcpu)
 	{
 		unsigned int cpu = (unsigned long)hcpu;
 
@@ -285,7 +285,7 @@ A: This is what you would need in your kernel code to receive notifications.
 		return NOTIFY_OK;
 	}
 
-	static struct notifier_block __cpuinitdata foobar_cpu_notifer =
+	static struct notifier_block foobar_cpu_notifer =
 	{
 	   .notifier_call = foobar_cpu_callback,
 	};

Documentation/devicetree/bindings/clock/imx27-clock.txt

@@ -98,6 +98,7 @@ clocks and IDs.
 	fpm                  83
 	mpll_osc_sel         84
 	mpll_sel             85
+	spll_gate	     86
 
 Examples:
 

Documentation/devicetree/bindings/vendor-prefixes.txt

@@ -26,6 +26,7 @@ est	ESTeem Wireless Modems
 fsl	Freescale Semiconductor
 GEFanuc	GE Fanuc Intelligent Platforms Embedded Systems, Inc.
 gef	GE Fanuc Intelligent Platforms Embedded Systems, Inc.
+hisilicon	Hisilicon Limited.
 hp	Hewlett Packard
 ibm	International Business Machines (IBM)
 idt	Integrated Device Technologies, Inc.
@@ -43,6 +44,7 @@ nxp	NXP Semiconductors
 onnn	ON Semiconductor Corp.
 picochip	Picochip Ltd
 powervr	PowerVR (deprecated, use img)
+qca	Qualcomm Atheros, Inc.
 qcom	Qualcomm, Inc.
 ralink	Mediatek/Ralink Technology Corp.
 ramtron	Ramtron International

Documentation/ja_JP/HOWTO

@@ -11,14 +11,14 @@ for non English (read: Japanese) speakers and is not intended as a
 fork. So if you have any comments or updates for this file, please try
 to update the original English file first.
 
-Last Updated: 2011/03/31
+Last Updated: 2013/07/19
 ==================================
 これは、
-linux-2.6.38/Documentation/HOWTO
+linux-3.10/Documentation/HOWTO
 の和訳です。
 
-翻訳団体： JF プロジェクト < http://www.linux.or.jp/JF/ >
+翻訳団体： JF プロジェクト < http://linuxjf.sourceforge.jp/ >
-翻訳日： 2011/3/28
+翻訳日： 2013/7/19
 翻訳者： Tsugikazu Shibata <tshibata at ab dot jp dot nec dot com>
 校正者： 松倉さん <nbh--mats at nifty dot com>
          小林 雅典さん (Masanori Kobayasi) <zap03216 at nifty dot ne dot jp>
@@ -245,7 +245,7 @@ Linux カーネルソースツリーの中に含まれる、きれいにし、
 自己参照方式で、索引がついた web 形式で、ソースコードを参照することが
 できます。この最新の素晴しいカーネルコードのリポジトリは以下で見つかり
 ます-
-	http://sosdg.org/~qiyong/lxr/
+	http://lxr.linux.no/+trees
 
 開発プロセス
 -----------------------
@@ -253,24 +253,24 @@ Linux カーネルソースツリーの中に含まれる、きれいにし、
 Linux カーネルの開発プロセスは現在幾つかの異なるメインカーネル「ブラン
 チ」と多数のサブシステム毎のカーネルブランチから構成されます。
 これらのブランチとは-
-  - メインの 2.6.x カーネルツリー
+  - メインの 3.x カーネルツリー
-  - 2.6.x.y -stable カーネルツリー
+  - 3.x.y -stable カーネルツリー
-  - 2.6.x -git カーネルパッチ
+  - 3.x -git カーネルパッチ
   - サブシステム毎のカーネルツリーとパッチ
-  - 統合テストのための 2.6.x -next カーネルツリー
+  - 統合テストのための 3.x -next カーネルツリー
 
-2.6.x カーネルツリー
+3.x カーネルツリー
 -----------------
 
-2.6.x カーネルは Linus Torvalds によってメンテナンスされ、kernel.org
+3.x カーネルは Linus Torvalds によってメンテナンスされ、kernel.org
-の pub/linux/kernel/v2.6/ ディレクトリに存在します。この開発プロセスは
+の pub/linux/kernel/v3.x/ ディレクトリに存在します。この開発プロセスは
 以下のとおり-
 
   - 新しいカーネルがリリースされた直後に、2週間の特別期間が設けられ、
     この期間中に、メンテナ達は Linus に大きな差分を送ることができます。
     このような差分は通常 -next カーネルに数週間含まれてきたパッチです。
     大きな変更は git(カーネルのソース管理ツール、詳細は
-    http://git-scm.com/  参照) を使って送るのが好ましいやり方ですが、パッ
+    http://git-scm.com/ 参照) を使って送るのが好ましいやり方ですが、パッ
     チファイルの形式のまま送るのでも十分です。
 
   - 2週間後、-rc1 カーネルがリリースされ、この後にはカーネル全体の安定
@@ -302,20 +302,20 @@ Andrew Morton が Linux-kernel メーリングリストにカーネルリリー
   実に認識されたバグの状況によりリリースされるのであり、前もって決めら
   れた計画によってリリースされるものではないからです。」
 
-2.6.x.y -stable カーネルツリー
+3.x.y -stable カーネルツリー
 ---------------------------
 
-バージョン番号が4つの数字に分かれているカーネルは -stable カーネルです。
+バージョン番号が3つの数字に分かれているカーネルは -stable カーネルです。
-これには、2.6.x カーネルで見つかったセキュリティ問題や重大な後戻りに対
+これには、3.x カーネルで見つかったセキュリティ問題や重大な後戻りに対
 する比較的小さい重要な修正が含まれます。
 
 これは、開発/実験的バージョンのテストに協力することに興味が無く、
 最新の安定したカーネルを使いたいユーザに推奨するブランチです。
 
-もし、2.6.x.y カーネルが存在しない場合には、番号が一番大きい 2.6.x が
+もし、3.x.y カーネルが存在しない場合には、番号が一番大きい 3.x が
 最新の安定版カーネルです。
 
-2.6.x.y は "stable" チーム <stable@kernel.org> でメンテされており、必
+3.x.y は "stable" チーム <stable@kernel.org> でメンテされており、必
 要に応じてリリースされます。通常のリリース期間は 2週間毎ですが、差し迫っ
 た問題がなければもう少し長くなることもあります。セキュリティ関連の問題
 の場合はこれに対してだいたいの場合、すぐにリリースがされます。
@@ -324,7 +324,7 @@ Andrew Morton が Linux-kernel メーリングリストにカーネルリリー
 イルにはどのような種類の変更が -stable ツリーに受け入れ可能か、またリ
 リースプロセスがどう動くかが記述されています。
 
-2.6.x -git パッチ
+3.x -git パッチ
 ------------------
 
 git リポジトリで管理されているLinus のカーネルツリーの毎日のスナップ
@@ -358,14 +358,14 @@ quilt シリーズとして公開されているパッチキューも使われ
 をつけることができます。大部分のこれらの patchwork のサイトは
 http://patchwork.kernel.org/ でリストされています。
 
-統合テストのための 2.6.x -next カーネルツリー
+統合テストのための 3.x -next カーネルツリー
 ---------------------------------------------
 
-サブシステムツリーの更新内容がメインラインの 2.6.x ツリーにマージされ
+サブシステムツリーの更新内容がメインラインの 3.x ツリーにマージされ
 る前に、それらは統合テストされる必要があります。この目的のため、実質的
 に全サブシステムツリーからほぼ毎日プルされてできる特別なテスト用のリ
 ポジトリが存在します-
-       http://git.kernel.org/?p=linux/kernel/git/sfr/linux-next.git
+       http://git.kernel.org/?p=linux/kernel/git/next/linux-next.git
        http://linux.f-seidel.de/linux-next/pmwiki/
 
 このやり方によって、-next カーネルは次のマージ機会でどんなものがメイン

MAINTAINERS

@@ -1642,7 +1642,7 @@ S:	Maintained
 F:	drivers/net/hamradio/baycom*
 
 BCACHE (BLOCK LAYER CACHE)
-M:	Kent Overstreet <koverstreet@google.com>
+M:	Kent Overstreet <kmo@daterainc.com>
 L:	linux-bcache@vger.kernel.org
 W:	http://bcache.evilpiepirate.org
 S:	Maintained:
@@ -3346,7 +3346,7 @@ F:	Documentation/firmware_class/
 F:	drivers/base/firmware*.c
 F:	include/linux/firmware.h
 
-FLASHSYSTEM DRIVER (IBM FlashSystem 70/80 PCI SSD Flash Card)
+FLASH ADAPTER DRIVER (IBM Flash Adapter 900GB Full Height PCI Flash Card)
 M:	Joshua Morris <josh.h.morris@us.ibm.com>
 M:	Philip Kelleher <pjk1939@linux.vnet.ibm.com>
 S:	Maintained
@@ -3622,11 +3622,9 @@ F:	drivers/isdn/gigaset/
 F:	include/uapi/linux/gigaset_dev.h
 
 GPIO SUBSYSTEM
-M:	Grant Likely <grant.likely@linaro.org>
 M:	Linus Walleij <linus.walleij@linaro.org>
 S:	Maintained
 L:	linux-gpio@vger.kernel.org
-T:	git git://git.secretlab.ca/git/linux-2.6.git
 F:	Documentation/gpio.txt
 F:	drivers/gpio/
 F:	include/linux/gpio*
@@ -4472,8 +4470,6 @@ F:	drivers/irqchip/
 
 IRQ DOMAINS (IRQ NUMBER MAPPING LIBRARY)
 M:	Benjamin Herrenschmidt <benh@kernel.crashing.org>
-M:	Grant Likely <grant.likely@linaro.org>
-T:	git git://git.secretlab.ca/git/linux-2.6.git irqdomain/next
 S:	Maintained
 F:	Documentation/IRQ-domain.txt
 F:	include/linux/irqdomain.h
@@ -4990,7 +4986,7 @@ F:	arch/powerpc/platforms/44x/
 
 LINUX FOR POWERPC EMBEDDED XILINX VIRTEX
 L:	linuxppc-dev@lists.ozlabs.org
-S:	Unmaintained
+S:	Orphan
 F:	arch/powerpc/*/*virtex*
 F:	arch/powerpc/*/*/*virtex*
 
@@ -5886,7 +5882,7 @@ OMAP DEVICE TREE SUPPORT
 M:	Benoît Cousson <b-cousson@ti.com>
 M:	Tony Lindgren <tony@atomide.com>
 L:	linux-omap@vger.kernel.org
-L:	devicetree-discuss@lists.ozlabs.org (moderated for non-subscribers)
+L:	devicetree@vger.kernel.org
 S:	Maintained
 F:	arch/arm/boot/dts/*omap*
 F:	arch/arm/boot/dts/*am3*
@@ -6050,17 +6046,28 @@ F:	drivers/i2c/busses/i2c-ocores.c
 OPEN FIRMWARE AND FLATTENED DEVICE TREE
 M:	Grant Likely <grant.likely@linaro.org>
 M:	Rob Herring <rob.herring@calxeda.com>
-L:	devicetree-discuss@lists.ozlabs.org (moderated for non-subscribers)
+L:	devicetree@vger.kernel.org
 W:	http://fdt.secretlab.ca
 T:	git git://git.secretlab.ca/git/linux-2.6.git
 S:	Maintained
-F:	Documentation/devicetree
+F:	drivers/of/
-F:	drivers/of
 F:	include/linux/of*.h
-F:	scripts/dtc
+F:	scripts/dtc/
 K:	of_get_property
 K:	of_match_table
 
+OPEN FIRMWARE AND FLATTENED DEVICE TREE BINDINGS
+M:	Rob Herring <rob.herring@calxeda.com>
+M:	Pawel Moll <pawel.moll@arm.com>
+M:	Mark Rutland <mark.rutland@arm.com>
+M:	Stephen Warren <swarren@wwwdotorg.org>
+M:	Ian Campbell <ian.campbell@citrix.com>
+L:	devicetree@vger.kernel.org
+S:	Maintained
+F:	Documentation/devicetree/
+F:	arch/*/boot/dts/
+F:	include/dt-bindings/
+
 OPENRISC ARCHITECTURE
 M:	Jonas Bonn <jonas@southpole.se>
 W:	http://openrisc.net
@@ -7746,7 +7753,6 @@ F:	drivers/clk/spear/
 
 SPI SUBSYSTEM
 M:	Mark Brown <broonie@kernel.org>
-M:	Grant Likely <grant.likely@linaro.org>
 L:	linux-spi@vger.kernel.org
 T:	git git://git.kernel.org/pub/scm/linux/kernel/git/broonie/spi.git
 Q:	http://patchwork.kernel.org/project/spi-devel-general/list/
@@ -7812,7 +7818,7 @@ F:	drivers/staging/asus_oled/
 
 STAGING - COMEDI
 M:	Ian Abbott <abbotti@mev.co.uk>
-M:	Mori Hess <fmhess@users.sourceforge.net>
+M:	H Hartley Sweeten <hsweeten@visionengravers.com>
 S:	Odd Fixes
 F:	drivers/staging/comedi/
 
@@ -9288,7 +9294,7 @@ S:	Maintained
 F:	drivers/net/ethernet/xilinx/xilinx_axienet*
 
 XILINX SYSTEMACE DRIVER
-S:	Unmaintained
+S:	Orphan
 F:	drivers/block/xsysace.c
 
 XILINX UARTLITE SERIAL DRIVER

Makefile

@@ -1,7 +1,7 @@
 VERSION = 3
 PATCHLEVEL = 11
 SUBLEVEL = 0
-EXTRAVERSION = -rc1
+EXTRAVERSION = -rc3
 NAME = Linux for Workgroups
 
 # *DOCUMENTATION*

arch/alpha/Kconfig

@@ -15,6 +15,7 @@ config ALPHA
 	select ARCH_WANT_OPTIONAL_GPIOLIB
 	select ARCH_WANT_IPC_PARSE_VERSION
 	select ARCH_HAVE_NMI_SAFE_CMPXCHG
+	select ARCH_HAS_ATOMIC64_DEC_IF_POSITIVE
 	select GENERIC_SMP_IDLE_THREAD
 	select GENERIC_CMOS_UPDATE
 	select GENERIC_STRNCPY_FROM_USER

arch/alpha/include/asm/atomic.h

@@ -186,17 +186,24 @@ static __inline__ long atomic64_sub_return(long i, atomic64_t * v)
  */
 static __inline__ int __atomic_add_unless(atomic_t *v, int a, int u)
 {
-	int c, old;
+	int c, new, old;
-	c = atomic_read(v);
+	smp_mb();
-	for (;;) {
+	__asm__ __volatile__(
-		if (unlikely(c == (u)))
+	"1:	ldl_l	%[old],%[mem]\n"
-			break;
+	"	cmpeq	%[old],%[u],%[c]\n"
-		old = atomic_cmpxchg((v), c, c + (a));
+	"	addl	%[old],%[a],%[new]\n"
-		if (likely(old == c))
+	"	bne	%[c],2f\n"
-			break;
+	"	stl_c	%[new],%[mem]\n"
-		c = old;
+	"	beq	%[new],3f\n"
-	}
+	"2:\n"
-	return c;
+	".subsection 2\n"
+	"3:	br	1b\n"
+	".previous"
+	: [old] "=&r"(old), [new] "=&r"(new), [c] "=&r"(c)
+	: [mem] "m"(*v), [a] "rI"(a), [u] "rI"((long)u)
+	: "memory");
+	smp_mb();
+	return old;
 }
 
 
@@ -207,21 +214,56 @@ static __inline__ int __atomic_add_unless(atomic_t *v, int a, int u)
  * @u: ...unless v is equal to u.
  *
  * Atomically adds @a to @v, so long as it was not @u.
- * Returns the old value of @v.
+ * Returns true iff @v was not @u.
  */
 static __inline__ int atomic64_add_unless(atomic64_t *v, long a, long u)
 {
-	long c, old;
+	long c, tmp;
-	c = atomic64_read(v);
+	smp_mb();
-	for (;;) {
+	__asm__ __volatile__(
-		if (unlikely(c == (u)))
+	"1:	ldq_l	%[tmp],%[mem]\n"
-			break;
+	"	cmpeq	%[tmp],%[u],%[c]\n"
-		old = atomic64_cmpxchg((v), c, c + (a));
+	"	addq	%[tmp],%[a],%[tmp]\n"
-		if (likely(old == c))
+	"	bne	%[c],2f\n"
-			break;
+	"	stq_c	%[tmp],%[mem]\n"
-		c = old;
+	"	beq	%[tmp],3f\n"
-	}
+	"2:\n"
-	return c != (u);
+	".subsection 2\n"
+	"3:	br	1b\n"
+	".previous"
+	: [tmp] "=&r"(tmp), [c] "=&r"(c)
+	: [mem] "m"(*v), [a] "rI"(a), [u] "rI"(u)
+	: "memory");
+	smp_mb();
+	return !c;
+}
+
+/*
+ * atomic64_dec_if_positive - decrement by 1 if old value positive
+ * @v: pointer of type atomic_t
+ *
+ * The function returns the old value of *v minus 1, even if
+ * the atomic variable, v, was not decremented.
+ */
+static inline long atomic64_dec_if_positive(atomic64_t *v)
+{
+	long old, tmp;
+	smp_mb();
+	__asm__ __volatile__(
+	"1:	ldq_l	%[old],%[mem]\n"
+	"	subq	%[old],1,%[tmp]\n"
+	"	ble	%[old],2f\n"
+	"	stq_c	%[tmp],%[mem]\n"
+	"	beq	%[tmp],3f\n"
+	"2:\n"
+	".subsection 2\n"
+	"3:	br	1b\n"
+	".previous"
+	: [old] "=&r"(old), [tmp] "=&r"(tmp)
+	: [mem] "m"(*v)
+	: "memory");
+	smp_mb();
+	return old - 1;
 }
 
 #define atomic64_inc_not_zero(v) atomic64_add_unless((v), 1, 0)

arch/alpha/include/asm/param.h

@@ -3,7 +3,9 @@
 
 #include <uapi/asm/param.h>
 
-#define HZ		CONFIG_HZ
+# undef HZ
-#define USER_HZ		HZ
+# define HZ		CONFIG_HZ
-# define CLOCKS_PER_SEC	HZ	/* frequency at which times() counts */
+# define USER_HZ	1024
+# define CLOCKS_PER_SEC	USER_HZ	/* frequency at which times() counts */
+
 #endif /* _ASM_ALPHA_PARAM_H */

arch/alpha/include/asm/spinlock.h

@@ -168,8 +168,4 @@ static inline void arch_write_unlock(arch_rwlock_t * lock)
 #define arch_read_lock_flags(lock, flags) arch_read_lock(lock)
 #define arch_write_lock_flags(lock, flags) arch_write_lock(lock)
 
-#define arch_spin_relax(lock)	cpu_relax()
-#define arch_read_relax(lock)	cpu_relax()
-#define arch_write_relax(lock)	cpu_relax()
-
 #endif /* _ALPHA_SPINLOCK_H */

arch/alpha/include/asm/unistd.h

@@ -3,8 +3,7 @@
 
 #include <uapi/asm/unistd.h>
 
-
+#define NR_SYSCALLS			508
-#define NR_SYSCALLS			506
 
 #define __ARCH_WANT_OLD_READDIR
 #define __ARCH_WANT_STAT64

arch/alpha/include/uapi/asm/param.h

@@ -1,13 +1,7 @@
 #ifndef _UAPI_ASM_ALPHA_PARAM_H
 #define _UAPI_ASM_ALPHA_PARAM_H
 
-/* ??? Gross.  I don't want to parameterize this, and supposedly the
-   hardware ignores reprogramming.  We also need userland buy-in to the 
-   change in HZ, since this is visible in the wait4 resources etc.  */
-
-#ifndef __KERNEL__
 #define HZ		1024
-#endif
 
 #define EXEC_PAGESIZE	8192
 
@@ -17,5 +11,4 @@
 
 #define MAXHOSTNAMELEN	64	/* max length of hostname */
 
-
 #endif /* _UAPI_ASM_ALPHA_PARAM_H */

arch/alpha/include/uapi/asm/unistd.h

@@ -467,5 +467,7 @@
 #define __NR_sendmmsg			503
 #define __NR_process_vm_readv		504
 #define __NR_process_vm_writev		505
+#define __NR_kcmp			506
+#define __NR_finit_module		507
 
 #endif /* _UAPI_ALPHA_UNISTD_H */

arch/alpha/kernel/entry.S

@@ -12,11 +12,32 @@
 
 	.text
 	.set noat
+	.cfi_sections	.debug_frame
 
 /* Stack offsets.  */
 #define SP_OFF			184
 #define SWITCH_STACK_SIZE	320
 
+.macro	CFI_START_OSF_FRAME	func
+	.align	4
+	.globl	\func
+	.type	\func,@function
+\func:
+	.cfi_startproc simple
+	.cfi_return_column 64
+	.cfi_def_cfa	$sp, 48
+	.cfi_rel_offset	64, 8
+	.cfi_rel_offset	$gp, 16
+	.cfi_rel_offset	$16, 24
+	.cfi_rel_offset	$17, 32
+	.cfi_rel_offset	$18, 40
+.endm
+
+.macro	CFI_END_OSF_FRAME	func
+	.cfi_endproc
+	.size	\func, . - \func
+.endm
+
 /*
  * This defines the normal kernel pt-regs layout.
  *
@@ -27,100 +48,158 @@
  * the palcode-provided values are available to the signal handler.
  */
 
-#define SAVE_ALL			\
+.macro	SAVE_ALL
-	subq	$sp, SP_OFF, $sp;	\
+	subq	$sp, SP_OFF, $sp
-	stq	$0, 0($sp);		\
+	.cfi_adjust_cfa_offset	SP_OFF
-	stq	$1, 8($sp);		\
+	stq	$0, 0($sp)
-	stq	$2, 16($sp);		\
+	stq	$1, 8($sp)
-	stq	$3, 24($sp);		\
+	stq	$2, 16($sp)
-	stq	$4, 32($sp);		\
+	stq	$3, 24($sp)
-	stq	$28, 144($sp);		\
+	stq	$4, 32($sp)
-	lda	$2, alpha_mv;		\
+	stq	$28, 144($sp)
-	stq	$5, 40($sp);		\
+	.cfi_rel_offset	$0, 0
-	stq	$6, 48($sp);		\
+	.cfi_rel_offset $1, 8
-	stq	$7, 56($sp);		\
+	.cfi_rel_offset	$2, 16
-	stq	$8, 64($sp);		\
+	.cfi_rel_offset	$3, 24
-	stq	$19, 72($sp);		\
+	.cfi_rel_offset	$4, 32
-	stq	$20, 80($sp);		\
+	.cfi_rel_offset	$28, 144
-	stq	$21, 88($sp);		\
+	lda	$2, alpha_mv
-	ldq	$2, HAE_CACHE($2);	\
+	stq	$5, 40($sp)
-	stq	$22, 96($sp);		\
+	stq	$6, 48($sp)
-	stq	$23, 104($sp);		\
+	stq	$7, 56($sp)
-	stq	$24, 112($sp);		\
+	stq	$8, 64($sp)
-	stq	$25, 120($sp);		\
+	stq	$19, 72($sp)
-	stq	$26, 128($sp);		\
+	stq	$20, 80($sp)
-	stq	$27, 136($sp);		\
+	stq	$21, 88($sp)
-	stq	$2, 152($sp);		\
+	ldq	$2, HAE_CACHE($2)
-	stq	$16, 160($sp);		\
+	stq	$22, 96($sp)
-	stq	$17, 168($sp);		\
+	stq	$23, 104($sp)
+	stq	$24, 112($sp)
+	stq	$25, 120($sp)
+	stq	$26, 128($sp)
+	stq	$27, 136($sp)
+	stq	$2, 152($sp)
+	stq	$16, 160($sp)
+	stq	$17, 168($sp)
 	stq	$18, 176($sp)
+	.cfi_rel_offset	$5, 40
+	.cfi_rel_offset	$6, 48
+	.cfi_rel_offset	$7, 56
+	.cfi_rel_offset	$8, 64
+	.cfi_rel_offset $19, 72
+	.cfi_rel_offset	$20, 80
+	.cfi_rel_offset	$21, 88
+	.cfi_rel_offset $22, 96
+	.cfi_rel_offset	$23, 104
+	.cfi_rel_offset	$24, 112
+	.cfi_rel_offset	$25, 120
+	.cfi_rel_offset	$26, 128
+	.cfi_rel_offset	$27, 136
+.endm
 
-#define RESTORE_ALL			\
+.macro	RESTORE_ALL
-	lda	$19, alpha_mv;		\
+	lda	$19, alpha_mv
-	ldq	$0, 0($sp);		\
+	ldq	$0, 0($sp)
-	ldq	$1, 8($sp);		\
+	ldq	$1, 8($sp)
-	ldq	$2, 16($sp);		\
+	ldq	$2, 16($sp)
-	ldq	$3, 24($sp);		\
+	ldq	$3, 24($sp)
-	ldq	$21, 152($sp);		\
+	ldq	$21, 152($sp)
-	ldq	$20, HAE_CACHE($19);	\
+	ldq	$20, HAE_CACHE($19)
-	ldq	$4, 32($sp);		\
+	ldq	$4, 32($sp)
-	ldq	$5, 40($sp);		\
+	ldq	$5, 40($sp)
-	ldq	$6, 48($sp);		\
+	ldq	$6, 48($sp)
-	ldq	$7, 56($sp);		\
+	ldq	$7, 56($sp)
-	subq	$20, $21, $20;		\
+	subq	$20, $21, $20
-	ldq	$8, 64($sp);		\
+	ldq	$8, 64($sp)
-	beq	$20, 99f;		\
+	beq	$20, 99f
-	ldq	$20, HAE_REG($19);	\
+	ldq	$20, HAE_REG($19)
-	stq	$21, HAE_CACHE($19);	\
+	stq	$21, HAE_CACHE($19)
-	stq	$21, 0($20);		\
+	stq	$21, 0($20)
-99:;					\
+99:	ldq	$19, 72($sp)
-	ldq	$19, 72($sp);		\
+	ldq	$20, 80($sp)
-	ldq	$20, 80($sp);		\
+	ldq	$21, 88($sp)
-	ldq	$21, 88($sp);		\
+	ldq	$22, 96($sp)
-	ldq	$22, 96($sp);		\
+	ldq	$23, 104($sp)
-	ldq	$23, 104($sp);		\
+	ldq	$24, 112($sp)
-	ldq	$24, 112($sp);		\
+	ldq	$25, 120($sp)
-	ldq	$25, 120($sp);		\
+	ldq	$26, 128($sp)
-	ldq	$26, 128($sp);		\
+	ldq	$27, 136($sp)
-	ldq	$27, 136($sp);		\
+	ldq	$28, 144($sp)
-	ldq	$28, 144($sp);		\
 	addq	$sp, SP_OFF, $sp
+	.cfi_restore	$0
+	.cfi_restore	$1
+	.cfi_restore	$2
+	.cfi_restore	$3
+	.cfi_restore	$4
+	.cfi_restore	$5
+	.cfi_restore	$6
+	.cfi_restore	$7
+	.cfi_restore	$8
+	.cfi_restore	$19
+	.cfi_restore	$20
+	.cfi_restore	$21
+	.cfi_restore	$22
+	.cfi_restore	$23
+	.cfi_restore	$24
+	.cfi_restore	$25
+	.cfi_restore	$26
+	.cfi_restore	$27
+	.cfi_restore	$28
+	.cfi_adjust_cfa_offset	-SP_OFF
+.endm
+
+.macro	DO_SWITCH_STACK
+	bsr	$1, do_switch_stack
+	.cfi_adjust_cfa_offset	SWITCH_STACK_SIZE
+	.cfi_rel_offset	$9, 0
+	.cfi_rel_offset	$10, 8
+	.cfi_rel_offset	$11, 16
+	.cfi_rel_offset	$12, 24
+	.cfi_rel_offset	$13, 32
+	.cfi_rel_offset	$14, 40
+	.cfi_rel_offset	$15, 48
+	/* We don't really care about the FP registers for debugging.  */
+.endm
+
+.macro	UNDO_SWITCH_STACK
+	bsr	$1, undo_switch_stack
+	.cfi_restore	$9
+	.cfi_restore	$10
+	.cfi_restore	$11
+	.cfi_restore	$12
+	.cfi_restore	$13
+	.cfi_restore	$14
+	.cfi_restore	$15
+	.cfi_adjust_cfa_offset	-SWITCH_STACK_SIZE
+.endm
 
 /*
  * Non-syscall kernel entry points.
  */
 
-	.align	4
+CFI_START_OSF_FRAME entInt
-	.globl	entInt
-	.ent	entInt
-entInt:
 	SAVE_ALL
 	lda	$8, 0x3fff
 	lda	$26, ret_from_sys_call
 	bic	$sp, $8, $8
 	mov	$sp, $19
 	jsr	$31, do_entInt
-.end entInt
+CFI_END_OSF_FRAME entInt
 
-	.align	4
+CFI_START_OSF_FRAME entArith
-	.globl	entArith
-	.ent	entArith
-entArith:
 	SAVE_ALL
 	lda	$8, 0x3fff
 	lda	$26, ret_from_sys_call
 	bic	$sp, $8, $8
 	mov	$sp, $18
 	jsr	$31, do_entArith
-.end entArith
+CFI_END_OSF_FRAME entArith
 
-	.align	4
+CFI_START_OSF_FRAME entMM
-	.globl	entMM
-	.ent	entMM
-entMM:
 	SAVE_ALL
 /* save $9 - $15 so the inline exception code can manipulate them.  */
 	subq	$sp, 56, $sp
+	.cfi_adjust_cfa_offset	56
 	stq	$9, 0($sp)
 	stq	$10, 8($sp)
 	stq	$11, 16($sp)
@@ -128,6 +207,13 @@ entMM:
 	stq	$13, 32($sp)
 	stq	$14, 40($sp)
 	stq	$15, 48($sp)
+	.cfi_rel_offset	$9, 0
+	.cfi_rel_offset	$10, 8
+	.cfi_rel_offset	$11, 16
+	.cfi_rel_offset	$12, 24
+	.cfi_rel_offset	$13, 32
+	.cfi_rel_offset	$14, 40
+	.cfi_rel_offset	$15, 48
 	addq	$sp, 56, $19
 /* handle the fault */
 	lda	$8, 0x3fff
@@ -142,28 +228,33 @@ entMM:
 	ldq	$14, 40($sp)
 	ldq	$15, 48($sp)
 	addq	$sp, 56, $sp
+	.cfi_restore	$9
+	.cfi_restore	$10
+	.cfi_restore	$11
+	.cfi_restore	$12
+	.cfi_restore	$13
+	.cfi_restore	$14
+	.cfi_restore	$15
+	.cfi_adjust_cfa_offset	-56
 /* finish up the syscall as normal.  */
 	br	ret_from_sys_call
-.end entMM
+CFI_END_OSF_FRAME entMM
 
-	.align	4
+CFI_START_OSF_FRAME entIF
-	.globl	entIF
-	.ent	entIF
-entIF:
 	SAVE_ALL
 	lda	$8, 0x3fff
 	lda	$26, ret_from_sys_call
 	bic	$sp, $8, $8
 	mov	$sp, $17
 	jsr	$31, do_entIF
-.end entIF
+CFI_END_OSF_FRAME entIF
 
-	.align	4
+CFI_START_OSF_FRAME entUna
-	.globl	entUna
-	.ent	entUna
-entUna:
 	lda	$sp, -256($sp)
+	.cfi_adjust_cfa_offset	256
 	stq	$0, 0($sp)
+	.cfi_rel_offset	$0, 0
+	.cfi_remember_state
 	ldq	$0, 256($sp)	/* get PS */
 	stq	$1, 8($sp)
 	stq	$2, 16($sp)
@@ -195,6 +286,32 @@ entUna:
 	stq	$28, 224($sp)
 	mov	$sp, $19
 	stq	$gp, 232($sp)
+	.cfi_rel_offset	$1, 1*8
+	.cfi_rel_offset	$2, 2*8
+	.cfi_rel_offset	$3, 3*8
+	.cfi_rel_offset	$4, 4*8
+	.cfi_rel_offset	$5, 5*8
+	.cfi_rel_offset	$6, 6*8
+	.cfi_rel_offset	$7, 7*8
+	.cfi_rel_offset	$8, 8*8
+	.cfi_rel_offset	$9, 9*8
+	.cfi_rel_offset	$10, 10*8
+	.cfi_rel_offset	$11, 11*8
+	.cfi_rel_offset	$12, 12*8
+	.cfi_rel_offset	$13, 13*8
+	.cfi_rel_offset	$14, 14*8
+	.cfi_rel_offset	$15, 15*8
+	.cfi_rel_offset	$19, 19*8
+	.cfi_rel_offset	$20, 20*8
+	.cfi_rel_offset	$21, 21*8
+	.cfi_rel_offset	$22, 22*8
+	.cfi_rel_offset	$23, 23*8
+	.cfi_rel_offset	$24, 24*8
+	.cfi_rel_offset	$25, 25*8
+	.cfi_rel_offset	$26, 26*8
+	.cfi_rel_offset	$27, 27*8
+	.cfi_rel_offset	$28, 28*8
+	.cfi_rel_offset	$29, 29*8
 	lda	$8, 0x3fff
 	stq	$31, 248($sp)
 	bic	$sp, $8, $8
@@ -228,16 +345,45 @@ entUna:
 	ldq	$28, 224($sp)
 	ldq	$gp, 232($sp)
 	lda	$sp, 256($sp)
+	.cfi_restore	$1
+	.cfi_restore	$2
+	.cfi_restore	$3
+	.cfi_restore	$4
+	.cfi_restore	$5
+	.cfi_restore	$6
+	.cfi_restore	$7
+	.cfi_restore	$8
+	.cfi_restore	$9
+	.cfi_restore	$10
+	.cfi_restore	$11
+	.cfi_restore	$12
+	.cfi_restore	$13
+	.cfi_restore	$14
+	.cfi_restore	$15
+	.cfi_restore	$19
+	.cfi_restore	$20
+	.cfi_restore	$21
+	.cfi_restore	$22
+	.cfi_restore	$23
+	.cfi_restore	$24
+	.cfi_restore	$25
+	.cfi_restore	$26
+	.cfi_restore	$27
+	.cfi_restore	$28
+	.cfi_restore	$29
+	.cfi_adjust_cfa_offset	-256
 	call_pal PAL_rti
-.end entUna
 
 	.align	4
-	.ent	entUnaUser
 entUnaUser:
+	.cfi_restore_state
 	ldq	$0, 0($sp)	/* restore original $0 */
 	lda	$sp, 256($sp)	/* pop entUna's stack frame */
+	.cfi_restore	$0
+	.cfi_adjust_cfa_offset	-256
 	SAVE_ALL		/* setup normal kernel stack */
 	lda	$sp, -56($sp)
+	.cfi_adjust_cfa_offset	56
 	stq	$9, 0($sp)
 	stq	$10, 8($sp)
 	stq	$11, 16($sp)
@@ -245,6 +391,13 @@ entUnaUser:
 	stq	$13, 32($sp)
 	stq	$14, 40($sp)
 	stq	$15, 48($sp)
+	.cfi_rel_offset	$9, 0
+	.cfi_rel_offset	$10, 8
+	.cfi_rel_offset	$11, 16
+	.cfi_rel_offset	$12, 24
+	.cfi_rel_offset	$13, 32
+	.cfi_rel_offset	$14, 40
+	.cfi_rel_offset	$15, 48
 	lda	$8, 0x3fff
 	addq	$sp, 56, $19
 	bic	$sp, $8, $8
@@ -257,20 +410,25 @@ entUnaUser:
 	ldq	$14, 40($sp)
 	ldq	$15, 48($sp)
 	lda	$sp, 56($sp)
+	.cfi_restore	$9
+	.cfi_restore	$10
+	.cfi_restore	$11
+	.cfi_restore	$12
+	.cfi_restore	$13
+	.cfi_restore	$14
+	.cfi_restore	$15
+	.cfi_adjust_cfa_offset	-56
 	br	ret_from_sys_call
-.end entUnaUser
+CFI_END_OSF_FRAME entUna
 
-	.align	4
+CFI_START_OSF_FRAME entDbg
-	.globl	entDbg
-	.ent	entDbg
-entDbg:
 	SAVE_ALL
 	lda	$8, 0x3fff
 	lda	$26, ret_from_sys_call
 	bic	$sp, $8, $8
 	mov	$sp, $16
 	jsr	$31, do_entDbg
-.end entDbg
+CFI_END_OSF_FRAME entDbg
 
 /*
  * The system call entry point is special.  Most importantly, it looks
@@ -285,8 +443,12 @@ entDbg:
 
 	.align	4
 	.globl	entSys
-	.globl	ret_from_sys_call
+	.type	entSys, @function
-	.ent	entSys
+	.cfi_startproc simple
+	.cfi_return_column 64
+	.cfi_def_cfa	$sp, 48
+	.cfi_rel_offset	64, 8
+	.cfi_rel_offset	$gp, 16
 entSys:
 	SAVE_ALL
 	lda	$8, 0x3fff
@@ -300,6 +462,9 @@ entSys:
 	stq	$17, SP_OFF+32($sp)
 	s8addq	$0, $5, $5
 	stq	$18, SP_OFF+40($sp)
+	.cfi_rel_offset	$16, SP_OFF+24
+	.cfi_rel_offset	$17, SP_OFF+32
+	.cfi_rel_offset	$18, SP_OFF+40
 	blbs	$3, strace
 	beq	$4, 1f
 	ldq	$27, 0($5)
@@ -310,6 +475,7 @@ entSys:
 	stq	$31, 72($sp)		/* a3=0 => no error */
 
 	.align	4
+	.globl	ret_from_sys_call
 ret_from_sys_call:
 	cmovne	$26, 0, $18		/* $18 = 0 => non-restartable */
 	ldq	$0, SP_OFF($sp)
@@ -324,10 +490,12 @@ ret_to_user:
 	and	$17, _TIF_WORK_MASK, $2
 	bne	$2, work_pending
 restore_all:
+	.cfi_remember_state
 	RESTORE_ALL
 	call_pal PAL_rti
 
 ret_to_kernel:
+	.cfi_restore_state
 	lda	$16, 7
 	call_pal PAL_swpipl
 	br restore_all
@@ -356,7 +524,6 @@ $ret_success:
 	stq	$0, 0($sp)
 	stq	$31, 72($sp)	/* a3=0 => no error */
 	br	ret_from_sys_call
-.end entSys
 
 /*
  * Do all cleanup when returning from all interrupts and system calls.
@@ -370,7 +537,7 @@ $ret_success:
  */
 
 	.align	4
-	.ent	work_pending
+	.type	work_pending, @function
 work_pending:
 	and	$17, _TIF_NOTIFY_RESUME | _TIF_SIGPENDING, $2
 	bne	$2, $work_notifysig
@@ -387,23 +554,22 @@ $work_resched:
 
 $work_notifysig:
 	mov	$sp, $16
-	bsr	$1, do_switch_stack
+	DO_SWITCH_STACK
 	jsr	$26, do_work_pending
-	bsr	$1, undo_switch_stack
+	UNDO_SWITCH_STACK
 	br	restore_all
-.end work_pending
 
 /*
  * PTRACE syscall handler
  */
 
 	.align	4
-	.ent	strace
+	.type	strace, @function
 strace:
 	/* set up signal stack, call syscall_trace */
-	bsr	$1, do_switch_stack
+	DO_SWITCH_STACK
 	jsr	$26, syscall_trace_enter /* returns the syscall number */
-	bsr	$1, undo_switch_stack
+	UNDO_SWITCH_STACK
 
 	/* get the arguments back.. */
 	ldq	$16, SP_OFF+24($sp)
@@ -431,9 +597,9 @@ ret_from_straced:
 $strace_success:
 	stq	$0, 0($sp)		/* save return value */
 
-	bsr	$1, do_switch_stack
+	DO_SWITCH_STACK
 	jsr	$26, syscall_trace_leave
-	bsr	$1, undo_switch_stack
+	UNDO_SWITCH_STACK
 	br	$31, ret_from_sys_call
 
 	.align	3
@@ -447,26 +613,31 @@ $strace_error:
 	stq	$0, 0($sp)
 	stq	$1, 72($sp)	/* a3 for return */
 
-	bsr	$1, do_switch_stack
+	DO_SWITCH_STACK
 	mov	$18, $9		/* save old syscall number */
 	mov	$19, $10	/* save old a3 */
 	jsr	$26, syscall_trace_leave
 	mov	$9, $18
 	mov	$10, $19
-	bsr	$1, undo_switch_stack
+	UNDO_SWITCH_STACK
 
 	mov	$31, $26	/* tell "ret_from_sys_call" we can restart */
 	br	ret_from_sys_call
-.end strace
+CFI_END_OSF_FRAME entSys
 
 /*
  * Save and restore the switch stack -- aka the balance of the user context.
  */
 
 	.align	4
-	.ent	do_switch_stack
+	.type	do_switch_stack, @function
+	.cfi_startproc simple
+	.cfi_return_column 64
+	.cfi_def_cfa $sp, 0
+	.cfi_register 64, $1
 do_switch_stack:
 	lda	$sp, -SWITCH_STACK_SIZE($sp)
+	.cfi_adjust_cfa_offset	SWITCH_STACK_SIZE
 	stq	$9, 0($sp)
 	stq	$10, 8($sp)
 	stq	$11, 16($sp)
@@ -510,10 +681,14 @@ do_switch_stack:
 	stt	$f0, 312($sp)	# save fpcr in slot of $f31
 	ldt	$f0, 64($sp)	# dont let "do_switch_stack" change fp state.
 	ret	$31, ($1), 1
-.end do_switch_stack
+	.cfi_endproc
+	.size	do_switch_stack, .-do_switch_stack
 
 	.align	4
-	.ent	undo_switch_stack
+	.type	undo_switch_stack, @function
+	.cfi_startproc simple
+	.cfi_def_cfa $sp, 0
+	.cfi_register 64, $1
 undo_switch_stack:
 	ldq	$9, 0($sp)
 	ldq	$10, 8($sp)
@@ -558,7 +733,8 @@ undo_switch_stack:
 	ldt	$f30, 304($sp)
 	lda	$sp, SWITCH_STACK_SIZE($sp)
 	ret	$31, ($1), 1
-.end undo_switch_stack
+	.cfi_endproc
+	.size	undo_switch_stack, .-undo_switch_stack
 
 /*
  * The meat of the context switch code.
@@ -566,17 +742,18 @@ undo_switch_stack:
 
 	.align	4
 	.globl	alpha_switch_to
-	.ent	alpha_switch_to
+	.type	alpha_switch_to, @function
+	.cfi_startproc
 alpha_switch_to:
-	.prologue 0
+	DO_SWITCH_STACK
-	bsr	$1, do_switch_stack
 	call_pal PAL_swpctx
 	lda	$8, 0x3fff
-	bsr	$1, undo_switch_stack
+	UNDO_SWITCH_STACK
 	bic	$sp, $8, $8
 	mov	$17, $0
 	ret
-.end alpha_switch_to
+	.cfi_endproc
+	.size	alpha_switch_to, .-alpha_switch_to
 
 /*
  * New processes begin life here.

arch/alpha/kernel/irq_alpha.c

@@ -236,7 +236,7 @@ void __init
 init_rtc_irq(void)
 {
 	irq_set_chip_and_handler_name(RTC_IRQ, &dummy_irq_chip,
-				      handle_simple_irq, "RTC");
+				      handle_percpu_irq, "RTC");
 	setup_irq(RTC_IRQ, &timer_irqaction);
 }
 

arch/alpha/kernel/smp.c

@@ -116,7 +116,7 @@ wait_boot_cpu_to_stop(int cpuid)
 /*
  * Where secondaries begin a life of C.
  */
-void __cpuinit
+void
 smp_callin(void)
 {
 	int cpuid = hard_smp_processor_id();
@@ -194,7 +194,7 @@ wait_for_txrdy (unsigned long cpumask)
  * Send a message to a secondary's console.  "START" is one such
  * interesting message.  ;-)
  */
-static void __cpuinit
+static void
 send_secondary_console_msg(char *str, int cpuid)
 {
 	struct percpu_struct *cpu;
@@ -264,9 +264,10 @@ recv_secondary_console_msg(void)
 		if (cnt <= 0 || cnt >= 80)
 			strcpy(buf, "<<< BOGUS MSG >>>");
 		else {
-			cp1 = (char *) &cpu->ipc_buffer[11];
+			cp1 = (char *) &cpu->ipc_buffer[1];
 			cp2 = buf;
-			strcpy(cp2, cp1);
+			memcpy(cp2, cp1, cnt);
+			cp2[cnt] = '\0';
 			
 			while ((cp2 = strchr(cp2, '\r')) != 0) {
 				*cp2 = ' ';
@@ -285,7 +286,7 @@ recv_secondary_console_msg(void)
 /*
  * Convince the console to have a secondary cpu begin execution.
  */
-static int __cpuinit
+static int
 secondary_cpu_start(int cpuid, struct task_struct *idle)
 {
 	struct percpu_struct *cpu;
@@ -356,7 +357,7 @@ secondary_cpu_start(int cpuid, struct task_struct *idle)
 /*
  * Bring one cpu online.
  */
-static int __cpuinit
+static int
 smp_boot_one_cpu(int cpuid, struct task_struct *idle)
 {
 	unsigned long timeout;
@@ -472,7 +473,7 @@ smp_prepare_boot_cpu(void)
 {
 }
 
-int __cpuinit
+int
 __cpu_up(unsigned int cpu, struct task_struct *tidle)
 {
 	smp_boot_one_cpu(cpu, tidle);

arch/alpha/kernel/sys_dp264.c

@@ -190,9 +190,6 @@ static struct irq_chip clipper_irq_type = {
 static void
 dp264_device_interrupt(unsigned long vector)
 {
-#if 1
-	printk("dp264_device_interrupt: NOT IMPLEMENTED YET!!\n");
-#else
 	unsigned long pld;
 	unsigned int i;
 
@@ -210,12 +207,7 @@ dp264_device_interrupt(unsigned long vector)
 			isa_device_interrupt(vector);
 		else
 			handle_irq(16 + i);
-#if 0
-		TSUNAMI_cchip->dir0.csr = 1UL << i; mb();
-		tmp = TSUNAMI_cchip->dir0.csr;
-#endif
 	}
-#endif
 }
 
 static void 

arch/alpha/kernel/sys_marvel.c

@@ -317,8 +317,9 @@ marvel_init_irq(void)
 }
 
 static int 
-marvel_map_irq(struct pci_dev *dev, u8 slot, u8 pin)
+marvel_map_irq(const struct pci_dev *cdev, u8 slot, u8 pin)
 {
+	struct pci_dev *dev = (struct pci_dev *)cdev;
 	struct pci_controller *hose = dev->sysdata;
 	struct io7_port *io7_port = hose->sysdata;
 	struct io7 *io7 = io7_port->io7;

arch/alpha/kernel/systbls.S

@@ -524,6 +524,8 @@ sys_call_table:
 	.quad sys_sendmmsg
 	.quad sys_process_vm_readv
 	.quad sys_process_vm_writev		/* 505 */
+	.quad sys_kcmp
+	.quad sys_finit_module
 
 	.size sys_call_table, . - sys_call_table
 	.type sys_call_table, @object

arch/alpha/kernel/time.c

@@ -105,9 +105,7 @@ void arch_irq_work_raise(void)
 
 static inline __u32 rpcc(void)
 {
-    __u32 result;
+	return __builtin_alpha_rpcc();
-    asm volatile ("rpcc %0" : "=r"(result));
-    return result;
 }
 
 int update_persistent_clock(struct timespec now)

arch/alpha/kernel/traps.c

@@ -32,7 +32,7 @@
 
 static int opDEC_fix;
 
-static void __cpuinit
+static void
 opDEC_check(void)
 {
 	__asm__ __volatile__ (
@@ -66,8 +66,8 @@ dik_show_regs(struct pt_regs *regs, unsigned long *r9_15)
 {
 	printk("pc = [<%016lx>]  ra = [<%016lx>]  ps = %04lx    %s\n",
 	       regs->pc, regs->r26, regs->ps, print_tainted());
-	print_symbol("pc is at %s\n", regs->pc);
+	printk("pc is at %pSR\n", (void *)regs->pc);
-	print_symbol("ra is at %s\n", regs->r26 );
+	printk("ra is at %pSR\n", (void *)regs->r26);
 	printk("v0 = %016lx  t0 = %016lx  t1 = %016lx\n",
 	       regs->r0, regs->r1, regs->r2);
 	printk("t2 = %016lx  t3 = %016lx  t4 = %016lx\n",
@@ -132,9 +132,7 @@ dik_show_trace(unsigned long *sp)
 			continue;
 		if (tmp >= (unsigned long) &_etext)
 			continue;
-		printk("[<%lx>]", tmp);
+		printk("[<%lx>] %pSR\n", tmp, (void *)tmp);
-		print_symbol(" %s", tmp);
-		printk("\n");
 		if (i > 40) {
 			printk(" ...");
 			break;
@@ -1059,7 +1057,7 @@ give_sigbus:
 	return;
 }
 
-void __cpuinit
+void
 trap_init(void)
 {
 	/* Tell PAL-code what global pointer we want in the kernel.  */

arch/arm/Kconfig

@@ -1600,8 +1600,7 @@ config LOCAL_TIMERS
 config ARCH_NR_GPIO
 	int
 	default 1024 if ARCH_SHMOBILE || ARCH_TEGRA
-	default 512 if SOC_OMAP5
+	default 512 if ARCH_EXYNOS || ARCH_KEYSTONE || SOC_OMAP5
-	default 512 if ARCH_KEYSTONE
 	default 392 if ARCH_U8500
 	default 352 if ARCH_VT8500
 	default 288 if ARCH_SUNXI

arch/arm/boot/dts/atlas6.dtsi

@@ -485,6 +485,12 @@
                                                 sirf,function = "usp0";
                                         };
                                 };
+				usp0_uart_nostreamctrl_pins_a: usp0@1 {
+                                        usp0 {
+                                                sirf,pins = "usp0_uart_nostreamctrl_grp";
+                                                sirf,function = "usp0_uart_nostreamctrl";
+                                        };
+                                };
                                 usp1_pins_a: usp1@0 {
                                         usp1 {
                                                 sirf,pins = "usp1grp";
@@ -515,16 +521,16 @@
                                                 sirf,function = "pulse_count";
                                         };
                                 };
-                                cko0_rst_pins_a: cko0_rst@0 {
+                                cko0_pins_a: cko0@0 {
-                                        cko0_rst {
+                                        cko0 {
-                                                sirf,pins = "cko0_rstgrp";
+                                                sirf,pins = "cko0grp";
-                                                sirf,function = "cko0_rst";
+                                                sirf,function = "cko0";
                                         };
                                 };
-                                cko1_rst_pins_a: cko1_rst@0 {
+                                cko1_pins_a: cko1@0 {
-                                        cko1_rst {
+                                        cko1 {
-                                                sirf,pins = "cko1_rstgrp";
+                                                sirf,pins = "cko1grp";
-                                                sirf,function = "cko1_rst";
+                                                sirf,function = "cko1";
                                         };
                                 };
 			};

arch/arm/boot/dts/imx28-apx4devkit.dts

@@ -147,7 +147,7 @@
 					reg = <0x0a>;
 					VDDA-supply = <&reg_3p3v>;
 					VDDIO-supply = <&reg_3p3v>;
-
+					clocks = <&saif0>;
 				};
 
 				pcf8563: rtc@51 {

arch/arm/boot/dts/imx28-evk.dts

@@ -195,7 +195,7 @@
 					reg = <0x0a>;
 					VDDA-supply = <&reg_3p3v>;
 					VDDIO-supply = <&reg_3p3v>;
-
+					clocks = <&saif0>;
 				};
 
 				at24@51 {

arch/arm/boot/dts/imx28-m28evk.dts

@@ -184,7 +184,7 @@
 					reg = <0x0a>;
 					VDDA-supply = <&reg_3p3v>;
 					VDDIO-supply = <&reg_3p3v>;
-
+					clocks = <&saif0>;
 				};
 
 				eeprom: eeprom@51 {

arch/arm/boot/dts/imx28.dtsi

@@ -837,6 +837,7 @@
 				compatible = "fsl,imx28-saif";
 				reg = <0x80042000 0x2000>;
 				interrupts = <59 80>;
+				#clock-cells = <0>;
 				clocks = <&clks 53>;
 				dmas = <&dma_apbx 4>;
 				dma-names = "rx-tx";

arch/arm/boot/dts/imx51-babbage.dts

@@ -61,6 +61,16 @@
 		mux-int-port = <2>;
 		mux-ext-port = <3>;
 	};
+
+	clocks {
+		clk_26M: codec_clock {
+			compatible = "fixed-clock";
+			reg=<0>;
+			#clock-cells = <0>;
+			clock-frequency = <26000000>;
+			gpios = <&gpio4 26 1>;
+		};
+	};
 };
 
 &esdhc1 {
@@ -229,6 +239,7 @@
 				MX51_PAD_EIM_A27__GPIO2_21   0x5
 				MX51_PAD_CSPI1_SS0__GPIO4_24 0x85
 				MX51_PAD_CSPI1_SS1__GPIO4_25 0x85
+				MX51_PAD_CSPI1_RDY__GPIO4_26 0x80000000
 			>;
 		};
 	};
@@ -255,7 +266,7 @@
 	sgtl5000: codec@0a {
 		compatible = "fsl,sgtl5000";
 		reg = <0x0a>;
-		clock-frequency = <26000000>;
+		clocks = <&clk_26M>;
 		VDDA-supply = <&vdig_reg>;
 		VDDIO-supply = <&vvideo_reg>;
 	};

arch/arm/boot/dts/imx53-mba53.dts

@@ -27,7 +27,7 @@
 
 	backlight {
 		compatible = "pwm-backlight";
-		pwms = <&pwm2 0 50000 0 0>;
+		pwms = <&pwm2 0 50000>;
 		brightness-levels = <0 24 28 32 36 40 44 48 52 56 60 64 68 72 76 80 84 88 92 96 100>;
 		default-brightness-level = <10>;
 		enable-gpios = <&gpio7 7 0>;

arch/arm/boot/dts/imx53.dtsi

@@ -725,15 +725,15 @@
 				uart1 {
 					pinctrl_uart1_1: uart1grp-1 {
 						fsl,pins = <
-							MX53_PAD_CSI0_DAT10__UART1_TXD_MUX 0x1c5
+							MX53_PAD_CSI0_DAT10__UART1_TXD_MUX 0x1e4
-							MX53_PAD_CSI0_DAT11__UART1_RXD_MUX 0x1c5
+							MX53_PAD_CSI0_DAT11__UART1_RXD_MUX 0x1e4
 						>;
 					};
 
 					pinctrl_uart1_2: uart1grp-2 {
 						fsl,pins = <
-							MX53_PAD_PATA_DIOW__UART1_TXD_MUX  0x1c5
+							MX53_PAD_PATA_DIOW__UART1_TXD_MUX  0x1e4
-							MX53_PAD_PATA_DMACK__UART1_RXD_MUX 0x1c5
+							MX53_PAD_PATA_DMACK__UART1_RXD_MUX 0x1e4
 						>;
 					};
 
@@ -748,8 +748,8 @@
 				uart2 {
 					pinctrl_uart2_1: uart2grp-1 {
 						fsl,pins = <
-							MX53_PAD_PATA_BUFFER_EN__UART2_RXD_MUX 0x1c5
+							MX53_PAD_PATA_BUFFER_EN__UART2_RXD_MUX 0x1e4
-							MX53_PAD_PATA_DMARQ__UART2_TXD_MUX     0x1c5
+							MX53_PAD_PATA_DMARQ__UART2_TXD_MUX     0x1e4
 						>;
 					};
 
@@ -766,17 +766,17 @@
 				uart3 {
 					pinctrl_uart3_1: uart3grp-1 {
 						fsl,pins = <
-							MX53_PAD_PATA_CS_0__UART3_TXD_MUX 0x1c5
+							MX53_PAD_PATA_CS_0__UART3_TXD_MUX 0x1e4
-							MX53_PAD_PATA_CS_1__UART3_RXD_MUX 0x1c5
+							MX53_PAD_PATA_CS_1__UART3_RXD_MUX 0x1e4
-							MX53_PAD_PATA_DA_1__UART3_CTS	  0x1c5
+							MX53_PAD_PATA_DA_1__UART3_CTS	  0x1e4
-							MX53_PAD_PATA_DA_2__UART3_RTS	  0x1c5
+							MX53_PAD_PATA_DA_2__UART3_RTS	  0x1e4
 						>;
 					};
 
 					pinctrl_uart3_2: uart3grp-2 {
 						fsl,pins = <
-							MX53_PAD_PATA_CS_0__UART3_TXD_MUX 0x1c5
+							MX53_PAD_PATA_CS_0__UART3_TXD_MUX 0x1e4
-							MX53_PAD_PATA_CS_1__UART3_RXD_MUX 0x1c5
+							MX53_PAD_PATA_CS_1__UART3_RXD_MUX 0x1e4
 						>;
 					};
 
@@ -785,8 +785,8 @@
 				uart4 {
 					pinctrl_uart4_1: uart4grp-1 {
 						fsl,pins = <
-							MX53_PAD_KEY_COL0__UART4_TXD_MUX 0x1c5
+							MX53_PAD_KEY_COL0__UART4_TXD_MUX 0x1e4
-							MX53_PAD_KEY_ROW0__UART4_RXD_MUX 0x1c5
+							MX53_PAD_KEY_ROW0__UART4_RXD_MUX 0x1e4
 						>;
 					};
 				};
@@ -794,8 +794,8 @@
 				uart5 {
 					pinctrl_uart5_1: uart5grp-1 {
 						fsl,pins = <
-							MX53_PAD_KEY_COL1__UART5_TXD_MUX 0x1c5
+							MX53_PAD_KEY_COL1__UART5_TXD_MUX 0x1e4
-							MX53_PAD_KEY_ROW1__UART5_RXD_MUX 0x1c5
+							MX53_PAD_KEY_ROW1__UART5_RXD_MUX 0x1e4
 						>;
 					};
 				};

arch/arm/boot/dts/prima2.dtsi

@@ -515,16 +515,16 @@
                                                 sirf,function = "pulse_count";
                                         };
                                 };
-                                cko0_rst_pins_a: cko0_rst@0 {
+                                cko0_pins_a: cko0@0 {
-                                        cko0_rst {
+                                        cko0 {
-                                                sirf,pins = "cko0_rstgrp";
+                                                sirf,pins = "cko0grp";
-                                                sirf,function = "cko0_rst";
+                                                sirf,function = "cko0";
                                         };
                                 };
-                                cko1_rst_pins_a: cko1_rst@0 {
+                                cko1_pins_a: cko1@0 {
-                                        cko1_rst {
+                                        cko1 {
-                                                sirf,pins = "cko1_rstgrp";
+                                                sirf,pins = "cko1grp";
-                                                sirf,function = "cko1_rst";
+                                                sirf,function = "cko1";
                                         };
                                 };
 			};

arch/arm/boot/dts/stih416-pinctrl.dtsi

@@ -166,6 +166,15 @@
 				reg		= <0x9000 0x100>;
 				st,bank-name	= "PIO31";
 			};
+
+			serial2-oe {
+				pinctrl_serial2_oe: serial2-1 {
+					st,pins {
+						output-enable	= <&PIO11 3 ALT2 OUT>;
+					};
+				};
+			};
+
 		};
 
 		pin-controller-rear {
@@ -218,7 +227,6 @@
 					st,pins {
 						tx	= <&PIO17 4 ALT2 OUT>;
 						rx	= <&PIO17 5 ALT2 IN>;
-						output-enable	= <&PIO11 3 ALT2 OUT>;
 					};
 				};
 			};

arch/arm/boot/dts/stih416.dtsi

@@ -79,7 +79,7 @@
 			interrupts	= <0 197 0>;
 			clocks          = <&CLK_S_ICN_REG_0>;
 			pinctrl-names 	= "default";
-			pinctrl-0 	= <&pinctrl_serial2>;
+			pinctrl-0 	= <&pinctrl_serial2 &pinctrl_serial2_oe>;
 		};
 
 		/* SBC_UART1 */

arch/arm/boot/dts/twl4030.dtsi

@@ -47,6 +47,12 @@
 		regulator-max-microvolt = <3150000>;
 	};
 
+	vmmc2: regulator-vmmc2 {
+		compatible = "ti,twl4030-vmmc2";
+		regulator-min-microvolt = <1850000>;
+		regulator-max-microvolt = <3150000>;
+	};
+
 	vusb1v5: regulator-vusb1v5 {
 		compatible = "ti,twl4030-vusb1v5";
 	};

arch/arm/boot/dts/vf610.dtsi

@@ -442,8 +442,8 @@
 				compatible = "fsl,mvf600-fec";
 				reg = <0x400d0000 0x1000>;
 				interrupts = <0 78 0x04>;
-				clocks = <&clks VF610_CLK_ENET>,
+				clocks = <&clks VF610_CLK_ENET0>,
-					<&clks VF610_CLK_ENET>,
+					<&clks VF610_CLK_ENET0>,
 					<&clks VF610_CLK_ENET>;
 				clock-names = "ipg", "ahb", "ptp";
 				status = "disabled";
@@ -453,8 +453,8 @@
 				compatible = "fsl,mvf600-fec";
 				reg = <0x400d1000 0x1000>;
 				interrupts = <0 79 0x04>;
-				clocks = <&clks VF610_CLK_ENET>,
+				clocks = <&clks VF610_CLK_ENET1>,
-					<&clks VF610_CLK_ENET>,
+					<&clks VF610_CLK_ENET1>,
 					<&clks VF610_CLK_ENET>;
 				clock-names = "ipg", "ahb", "ptp";
 				status = "disabled";

arch/arm/common/edma.c

@@ -26,7 +26,6 @@
 #include <linux/io.h>
 #include <linux/slab.h>
 #include <linux/edma.h>
-#include <linux/err.h>
 #include <linux/of_address.h>
 #include <linux/of_device.h>
 #include <linux/of_dma.h>

arch/arm/common/mcpm_platsmp.c

@@ -19,7 +19,7 @@
 #include <asm/smp.h>
 #include <asm/smp_plat.h>
 
-static int __cpuinit mcpm_boot_secondary(unsigned int cpu, struct task_struct *idle)
+static int mcpm_boot_secondary(unsigned int cpu, struct task_struct *idle)
 {
 	unsigned int mpidr, pcpu, pcluster, ret;
 	extern void secondary_startup(void);
@@ -40,7 +40,7 @@ static int __cpuinit mcpm_boot_secondary(unsigned int cpu, struct task_struct *i
 	return 0;
 }
 
-static void __cpuinit mcpm_secondary_init(unsigned int cpu)
+static void mcpm_secondary_init(unsigned int cpu)
 {
 	mcpm_cpu_powered_up();
 }

arch/arm/configs/da8xx_omapl_defconfig

@@ -102,6 +102,8 @@ CONFIG_SND_SOC=m
 CONFIG_SND_DAVINCI_SOC=m
 # CONFIG_HID_SUPPORT is not set
 # CONFIG_USB_SUPPORT is not set
+CONFIG_DMADEVICES=y
+CONFIG_TI_EDMA=y
 CONFIG_EXT2_FS=y
 CONFIG_EXT3_FS=y
 CONFIG_XFS_FS=m

arch/arm/configs/davinci_all_defconfig

@@ -162,6 +162,8 @@ CONFIG_LEDS_TRIGGERS=y
 CONFIG_LEDS_TRIGGER_TIMER=m
 CONFIG_LEDS_TRIGGER_HEARTBEAT=m
 CONFIG_RTC_CLASS=y
+CONFIG_DMADEVICES=y
+CONFIG_TI_EDMA=y
 CONFIG_EXT2_FS=y
 CONFIG_EXT3_FS=y
 CONFIG_XFS_FS=m

arch/arm/configs/multi_v7_defconfig

@@ -53,6 +53,7 @@ CONFIG_IP_PNP=y
 CONFIG_IP_PNP_DHCP=y
 CONFIG_DEVTMPFS=y
 CONFIG_DEVTMPFS_MOUNT=y
+CONFIG_OMAP_OCP2SCP=y
 CONFIG_BLK_DEV_SD=y
 CONFIG_ATA=y
 CONFIG_SATA_AHCI_PLATFORM=y
@@ -61,6 +62,7 @@ CONFIG_SATA_MV=y
 CONFIG_NETDEVICES=y
 CONFIG_SUN4I_EMAC=y
 CONFIG_NET_CALXEDA_XGMAC=y
+CONFIG_KS8851=y
 CONFIG_SMSC911X=y
 CONFIG_STMMAC_ETH=y
 CONFIG_MDIO_SUN4I=y
@@ -89,6 +91,7 @@ CONFIG_I2C_DESIGNWARE_PLATFORM=y
 CONFIG_I2C_SIRF=y
 CONFIG_I2C_TEGRA=y
 CONFIG_SPI=y
+CONFIG_SPI_OMAP24XX=y
 CONFIG_SPI_PL022=y
 CONFIG_SPI_SIRF=y
 CONFIG_SPI_TEGRA114=y
@@ -111,11 +114,12 @@ CONFIG_FB_SIMPLE=y
 CONFIG_USB=y
 CONFIG_USB_XHCI_HCD=y
 CONFIG_USB_EHCI_HCD=y
-CONFIG_USB_EHCI_MXC=y
 CONFIG_USB_EHCI_TEGRA=y
 CONFIG_USB_EHCI_HCD_PLATFORM=y
 CONFIG_USB_ISP1760_HCD=y
 CONFIG_USB_STORAGE=y
+CONFIG_USB_CHIPIDEA=y
+CONFIG_USB_CHIPIDEA_HOST=y
 CONFIG_AB8500_USB=y
 CONFIG_NOP_USB_XCEIV=y
 CONFIG_OMAP_USB2=y

arch/arm/configs/nhk8815_defconfig

@@ -1,6 +1,8 @@
 # CONFIG_LOCALVERSION_AUTO is not set
 # CONFIG_SWAP is not set
 CONFIG_SYSVIPC=y
+CONFIG_NO_HZ_IDLE=y
+CONFIG_HIGH_RES_TIMERS=y
 CONFIG_IKCONFIG=y
 CONFIG_IKCONFIG_PROC=y
 CONFIG_LOG_BUF_SHIFT=14
@@ -48,7 +50,6 @@ CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
 CONFIG_MTD=y
 CONFIG_MTD_TESTS=m
 CONFIG_MTD_CMDLINE_PARTS=y
-CONFIG_MTD_CHAR=y
 CONFIG_MTD_BLOCK=y
 CONFIG_MTD_NAND_ECC_SMC=y
 CONFIG_MTD_NAND=y
@@ -94,8 +95,10 @@ CONFIG_I2C_GPIO=y
 CONFIG_I2C_NOMADIK=y
 CONFIG_DEBUG_GPIO=y
 # CONFIG_HWMON is not set
+CONFIG_REGULATOR=y
 CONFIG_MMC=y
-CONFIG_MMC_CLKGATE=y
+CONFIG_MMC_UNSAFE_RESUME=y
+# CONFIG_MMC_BLOCK_BOUNCE is not set
 CONFIG_MMC_ARMMMCI=y
 CONFIG_NEW_LEDS=y
 CONFIG_LEDS_CLASS=y

arch/arm/include/asm/arch_timer.h

@@ -89,7 +89,7 @@ static inline u64 arch_counter_get_cntvct(void)
 	return cval;
 }
 
-static inline void __cpuinit arch_counter_set_user_access(void)
+static inline void arch_counter_set_user_access(void)
 {
 	u32 cntkctl;
 

arch/arm/kernel/head-common.S

@@ -149,7 +149,6 @@ ENDPROC(lookup_processor_type)
  *	r5 = proc_info pointer in physical address space
  *	r9 = cpuid (preserved)
  */
-	__CPUINIT
 __lookup_processor_type:
 	adr	r3, __lookup_processor_type_data
 	ldmia	r3, {r4 - r6}

arch/arm/kernel/head-nommu.S

@@ -87,7 +87,6 @@ ENTRY(stext)
 ENDPROC(stext)
 
 #ifdef CONFIG_SMP
-	__CPUINIT
 ENTRY(secondary_startup)
 	/*
 	 * Common entry point for secondary CPUs.

arch/arm/kernel/head.S

@@ -343,7 +343,6 @@ __turn_mmu_on_loc:
 	.long	__turn_mmu_on_end
 
 #if defined(CONFIG_SMP)
-	__CPUINIT
 ENTRY(secondary_startup)
 	/*
 	 * Common entry point for secondary CPUs.

arch/arm/kernel/hw_breakpoint.c

@@ -1020,7 +1020,7 @@ out_mdbgen:
 		cpumask_or(&debug_err_mask, &debug_err_mask, cpumask_of(cpu));
 }
 
-static int __cpuinit dbg_reset_notify(struct notifier_block *self,
+static int dbg_reset_notify(struct notifier_block *self,
 				      unsigned long action, void *cpu)
 {
 	if ((action & ~CPU_TASKS_FROZEN) == CPU_ONLINE)
@@ -1029,7 +1029,7 @@ static int __cpuinit dbg_reset_notify(struct notifier_block *self,
 	return NOTIFY_OK;
 }
 
-static struct notifier_block __cpuinitdata dbg_reset_nb = {
+static struct notifier_block dbg_reset_nb = {
 	.notifier_call = dbg_reset_notify,
 };
 

arch/arm/kernel/perf_event_cpu.c

@@ -157,8 +157,8 @@ static void cpu_pmu_init(struct arm_pmu *cpu_pmu)
  * UNKNOWN at reset, the PMU must be explicitly reset to avoid reading
  * junk values out of them.
  */
-static int __cpuinit cpu_pmu_notify(struct notifier_block *b,
+static int cpu_pmu_notify(struct notifier_block *b, unsigned long action,
-				    unsigned long action, void *hcpu)
+			  void *hcpu)
 {
 	if ((action & ~CPU_TASKS_FROZEN) != CPU_STARTING)
 		return NOTIFY_DONE;
@@ -171,7 +171,7 @@ static int __cpuinit cpu_pmu_notify(struct notifier_block *b,
 	return NOTIFY_OK;
 }
 
-static struct notifier_block __cpuinitdata cpu_pmu_hotplug_notifier = {
+static struct notifier_block cpu_pmu_hotplug_notifier = {
 	.notifier_call = cpu_pmu_notify,
 };
 

arch/arm/kernel/psci_smp.c

@@ -46,8 +46,7 @@
 
 extern void secondary_startup(void);
 
-static int __cpuinit psci_boot_secondary(unsigned int cpu,
+static int psci_boot_secondary(unsigned int cpu, struct task_struct *idle)
-					 struct task_struct *idle)
 {
 	if (psci_ops.cpu_on)
 		return psci_ops.cpu_on(cpu_logical_map(cpu),

arch/arm/kernel/smp.c

@@ -58,7 +58,7 @@ struct secondary_data secondary_data;
  * control for which core is the next to come out of the secondary
  * boot "holding pen"
  */
-volatile int __cpuinitdata pen_release = -1;
+volatile int pen_release = -1;
 
 enum ipi_msg_type {
 	IPI_WAKEUP,
@@ -86,7 +86,7 @@ static unsigned long get_arch_pgd(pgd_t *pgd)
 	return pgdir >> ARCH_PGD_SHIFT;
 }
 
-int __cpuinit __cpu_up(unsigned int cpu, struct task_struct *idle)
+int __cpu_up(unsigned int cpu, struct task_struct *idle)
 {
 	int ret;
 
@@ -138,7 +138,7 @@ void __init smp_init_cpus(void)
 		smp_ops.smp_init_cpus();
 }
 
-int __cpuinit boot_secondary(unsigned int cpu, struct task_struct *idle)
+int boot_secondary(unsigned int cpu, struct task_struct *idle)
 {
 	if (smp_ops.smp_boot_secondary)
 		return smp_ops.smp_boot_secondary(cpu, idle);
@@ -170,7 +170,7 @@ static int platform_cpu_disable(unsigned int cpu)
 /*
  * __cpu_disable runs on the processor to be shutdown.
  */
-int __cpuinit __cpu_disable(void)
+int __cpu_disable(void)
 {
 	unsigned int cpu = smp_processor_id();
 	int ret;
@@ -216,7 +216,7 @@ static DECLARE_COMPLETION(cpu_died);
  * called on the thread which is asking for a CPU to be shutdown -
  * waits until shutdown has completed, or it is timed out.
  */
-void __cpuinit __cpu_die(unsigned int cpu)
+void __cpu_die(unsigned int cpu)
 {
 	if (!wait_for_completion_timeout(&cpu_died, msecs_to_jiffies(5000))) {
 		pr_err("CPU%u: cpu didn't die\n", cpu);
@@ -306,7 +306,7 @@ void __ref cpu_die(void)
  * Called by both boot and secondaries to move global data into
  * per-processor storage.
  */
-static void __cpuinit smp_store_cpu_info(unsigned int cpuid)
+static void smp_store_cpu_info(unsigned int cpuid)
 {
 	struct cpuinfo_arm *cpu_info = &per_cpu(cpu_data, cpuid);
 
@@ -322,7 +322,7 @@ static void percpu_timer_setup(void);
  * This is the secondary CPU boot entry.  We're using this CPUs
  * idle thread stack, but a set of temporary page tables.
  */
-asmlinkage void __cpuinit secondary_start_kernel(void)
+asmlinkage void secondary_start_kernel(void)
 {
 	struct mm_struct *mm = &init_mm;
 	unsigned int cpu;
@@ -521,7 +521,7 @@ static void broadcast_timer_set_mode(enum clock_event_mode mode,
 {
 }
 
-static void __cpuinit broadcast_timer_setup(struct clock_event_device *evt)
+static void broadcast_timer_setup(struct clock_event_device *evt)
 {
 	evt->name	= "dummy_timer";
 	evt->features	= CLOCK_EVT_FEAT_ONESHOT |
@@ -550,7 +550,7 @@ int local_timer_register(struct local_timer_ops *ops)
 }
 #endif
 
-static void __cpuinit percpu_timer_setup(void)
+static void percpu_timer_setup(void)
 {
 	unsigned int cpu = smp_processor_id();
 	struct clock_event_device *evt = &per_cpu(percpu_clockevent, cpu);

arch/arm/kernel/smp_twd.c

@@ -187,7 +187,7 @@ core_initcall(twd_cpufreq_init);
 
 #endif
 
-static void __cpuinit twd_calibrate_rate(void)
+static void twd_calibrate_rate(void)
 {
 	unsigned long count;
 	u64 waitjiffies;
@@ -265,7 +265,7 @@ static void twd_get_clock(struct device_node *np)
 /*
  * Setup the local clock events for a CPU.
  */
-static int __cpuinit twd_timer_setup(struct clock_event_device *clk)
+static int twd_timer_setup(struct clock_event_device *clk)
 {
 	struct clock_event_device **this_cpu_clk;
 	int cpu = smp_processor_id();
@@ -308,7 +308,7 @@ static int __cpuinit twd_timer_setup(struct clock_event_device *clk)
 	return 0;
 }
 
-static struct local_timer_ops twd_lt_ops __cpuinitdata = {
+static struct local_timer_ops twd_lt_ops = {
 	.setup	= twd_timer_setup,
 	.stop	= twd_timer_stop,
 };

arch/arm/lib/delay.c

@@ -86,7 +86,7 @@ void __init register_current_timer_delay(const struct delay_timer *timer)
 	}
 }
 
-unsigned long __cpuinit calibrate_delay_is_known(void)
+unsigned long calibrate_delay_is_known(void)
 {
 	delay_calibrated = true;
 	return lpj_fine;

arch/arm/mach-davinci/board-dm365-evm.c

@@ -505,7 +505,7 @@ static struct vpbe_output dm365evm_vpbe_outputs[] = {
 /*
  * Amplifiers on the board
  */
-struct ths7303_platform_data ths7303_pdata = {
+static struct ths7303_platform_data ths7303_pdata = {
 	.ch_1 = 3,
 	.ch_2 = 3,
 	.ch_3 = 3,

arch/arm/mach-davinci/dm355.c

@@ -860,7 +860,7 @@ static struct platform_device dm355_vpbe_display = {
 	},
 };
 
-struct venc_platform_data dm355_venc_pdata = {
+static struct venc_platform_data dm355_venc_pdata = {
 	.setup_pinmux	= dm355_vpbe_setup_pinmux,
 	.setup_clock	= dm355_venc_setup_clock,
 };

arch/arm/mach-davinci/dm365.c

@@ -1349,7 +1349,7 @@ static struct platform_device dm365_vpbe_display = {
 	},
 };
 
-struct venc_platform_data dm365_venc_pdata = {
+static struct venc_platform_data dm365_venc_pdata = {
 	.setup_pinmux	= dm365_vpbe_setup_pinmux,
 	.setup_clock	= dm365_venc_setup_clock,
 };

arch/arm/mach-exynos/Kconfig

@@ -92,6 +92,7 @@ config SOC_EXYNOS5440
 	bool "SAMSUNG EXYNOS5440"
 	default y
 	depends on ARCH_EXYNOS5
+	select ARCH_DMA_ADDR_T_64BIT if ARM_LPAE
 	select ARCH_HAS_OPP
 	select HAVE_ARM_ARCH_TIMER
 	select AUTO_ZRELADDR

arch/arm/mach-exynos/Makefile

@@ -14,7 +14,7 @@ obj-				:=
 
 obj-$(CONFIG_ARCH_EXYNOS)	+= common.o
 
-obj-$(CONFIG_PM)		+= pm.o
+obj-$(CONFIG_S5P_PM)		+= pm.o
 obj-$(CONFIG_PM_GENERIC_DOMAINS) += pm_domains.o
 obj-$(CONFIG_CPU_IDLE)		+= cpuidle.o
 

arch/arm/mach-exynos/common.c

@@ -58,7 +58,6 @@ static const char name_exynos5440[] = "EXYNOS5440";
 
 static void exynos4_map_io(void);
 static void exynos5_map_io(void);
-static void exynos5440_map_io(void);
 static int exynos_init(void);
 
 static struct cpu_table cpu_ids[] __initdata = {
@@ -95,7 +94,6 @@ static struct cpu_table cpu_ids[] __initdata = {
 	}, {
 		.idcode		= EXYNOS5440_SOC_ID,
 		.idmask		= EXYNOS5_SOC_MASK,
-		.map_io		= exynos5440_map_io,
 		.init		= exynos_init,
 		.name		= name_exynos5440,
 	},
@@ -149,11 +147,6 @@ static struct map_desc exynos4_iodesc[] __initdata = {
 		.pfn		= __phys_to_pfn(EXYNOS4_PA_GIC_DIST),
 		.length		= SZ_64K,
 		.type		= MT_DEVICE,
-	}, {
-		.virtual	= (unsigned long)S3C_VA_UART,
-		.pfn		= __phys_to_pfn(EXYNOS4_PA_UART),
-		.length		= SZ_512K,
-		.type		= MT_DEVICE,
 	}, {
 		.virtual	= (unsigned long)S5P_VA_CMU,
 		.pfn		= __phys_to_pfn(EXYNOS4_PA_CMU),
@@ -268,20 +261,6 @@ static struct map_desc exynos5_iodesc[] __initdata = {
 		.pfn		= __phys_to_pfn(EXYNOS5_PA_PMU),
 		.length		= SZ_64K,
 		.type		= MT_DEVICE,
-	}, {
-		.virtual	= (unsigned long)S3C_VA_UART,
-		.pfn		= __phys_to_pfn(EXYNOS5_PA_UART),
-		.length		= SZ_512K,
-		.type		= MT_DEVICE,
-	},
-};
-
-static struct map_desc exynos5440_iodesc0[] __initdata = {
-	{
-		.virtual	= (unsigned long)S3C_VA_UART,
-		.pfn		= __phys_to_pfn(EXYNOS5440_PA_UART0),
-		.length		= SZ_512K,
-		.type		= MT_DEVICE,
 	},
 };
 
@@ -388,11 +367,6 @@ static void __init exynos5_map_io(void)
 		iotable_init(exynos5250_iodesc, ARRAY_SIZE(exynos5250_iodesc));
 }
 
-static void __init exynos5440_map_io(void)
-{
-	iotable_init(exynos5440_iodesc0, ARRAY_SIZE(exynos5440_iodesc0));
-}
-
 void __init exynos_init_time(void)
 {
 	of_clk_init(NULL);

arch/arm/mach-exynos/common.h

@@ -97,6 +97,5 @@ struct exynos_pmu_conf {
 };
 
 extern void exynos_sys_powerdown_conf(enum sys_powerdown mode);
-extern void s3c_cpu_resume(void);
 
 #endif /* __ARCH_ARM_MACH_EXYNOS_COMMON_H */

arch/arm/mach-exynos/cpuidle.c

@@ -25,6 +25,7 @@
 #include <mach/regs-pmu.h>
 
 #include <plat/cpu.h>
+#include <plat/pm.h>
 
 #include "common.h"
 

arch/arm/mach-exynos/headsmp.S

@@ -13,8 +13,6 @@
 #include <linux/linkage.h>
 #include <linux/init.h>
 
-	__CPUINIT
-
 /*
  * exynos4 specific entry point for secondary CPUs.  This provides
  * a "holding pen" into which all secondary cores are held until we're

arch/arm/mach-exynos/include/mach/memory.h

@@ -15,8 +15,13 @@
 
 #define PLAT_PHYS_OFFSET		UL(0x40000000)
 
+#ifndef CONFIG_ARM_LPAE
 /* Maximum of 256MiB in one bank */
 #define MAX_PHYSMEM_BITS	32
 #define SECTION_SIZE_BITS	28
+#else
+#define MAX_PHYSMEM_BITS	36
+#define SECTION_SIZE_BITS	31
+#endif
 
 #endif /* __ASM_ARCH_MEMORY_H */

arch/arm/mach-exynos/platsmp.c

@@ -75,7 +75,7 @@ static void __iomem *scu_base_addr(void)
 
 static DEFINE_SPINLOCK(boot_lock);
 
-static void __cpuinit exynos_secondary_init(unsigned int cpu)
+static void exynos_secondary_init(unsigned int cpu)
 {
 	/*
 	 * let the primary processor know we're out of the
@@ -90,7 +90,7 @@ static void __cpuinit exynos_secondary_init(unsigned int cpu)
 	spin_unlock(&boot_lock);
 }
 
-static int __cpuinit exynos_boot_secondary(unsigned int cpu, struct task_struct *idle)
+static int exynos_boot_secondary(unsigned int cpu, struct task_struct *idle)
 {
 	unsigned long timeout;
 	unsigned long phys_cpu = cpu_logical_map(cpu);

arch/arm/mach-exynos/pm.c

@@ -217,6 +217,9 @@ static __init int exynos_pm_drvinit(void)
 	struct clk *pll_base;
 	unsigned int tmp;
 
+	if (soc_is_exynos5440())
+		return 0;
+
 	s3c_pm_init();
 
 	/* All wakeup disable */
@@ -340,6 +343,9 @@ static struct syscore_ops exynos_pm_syscore_ops = {
 
 static __init int exynos_pm_syscore_init(void)
 {
+	if (soc_is_exynos5440())
+		return 0;
+
 	register_syscore_ops(&exynos_pm_syscore_ops);
 	return 0;
 }

arch/arm/mach-footbridge/dc21285.c

@@ -276,8 +276,6 @@ int __init dc21285_setup(int nr, struct pci_sys_data *sys)
 
 	sys->mem_offset  = DC21285_PCI_MEM;
 
-	pci_ioremap_io(0, DC21285_PCI_IO);
-
 	pci_add_resource_offset(&sys->resources, &res[0], sys->mem_offset);
 	pci_add_resource_offset(&sys->resources, &res[1], sys->mem_offset);
 

arch/arm/mach-highbank/highbank.c

@@ -115,6 +115,7 @@ static int highbank_platform_notifier(struct notifier_block *nb,
 {
 	struct resource *res;
 	int reg = -1;
+	u32 val;
 	struct device *dev = __dev;
 
 	if (event != BUS_NOTIFY_ADD_DEVICE)
@@ -141,10 +142,10 @@ static int highbank_platform_notifier(struct notifier_block *nb,
 		return NOTIFY_DONE;
 
 	if (of_property_read_bool(dev->of_node, "dma-coherent")) {
-		writel(0xff31, sregs_base + reg);
+		val = readl(sregs_base + reg);
+		writel(val | 0xff01, sregs_base + reg);
 		set_dma_ops(dev, &arm_coherent_dma_ops);
-	} else
+	}
-		writel(0, sregs_base + reg);
 
 	return NOTIFY_OK;
 }

arch/arm/mach-highbank/platsmp.c

@@ -24,7 +24,7 @@
 
 extern void secondary_startup(void);
 
-static int __cpuinit highbank_boot_secondary(unsigned int cpu, struct task_struct *idle)
+static int highbank_boot_secondary(unsigned int cpu, struct task_struct *idle)
 {
 	highbank_set_cpu_jump(cpu, secondary_startup);
 	arch_send_wakeup_ipi_mask(cpumask_of(cpu));

arch/arm/mach-imx/clk-imx6q.c

@@ -199,7 +199,8 @@ static const char *pcie_axi_sels[]	= { "axi", "ahb", };
 static const char *ssi_sels[]		= { "pll3_pfd2_508m", "pll3_pfd3_454m", "pll4_post_div", };
 static const char *usdhc_sels[]	= { "pll2_pfd2_396m", "pll2_pfd0_352m", };
 static const char *enfc_sels[]	= { "pll2_pfd0_352m", "pll2_bus", "pll3_usb_otg", "pll2_pfd2_396m", };
-static const char *emi_sels[]		= { "axi", "pll3_usb_otg", "pll2_pfd2_396m", "pll2_pfd0_352m", };
+static const char *emi_sels[]		= { "pll2_pfd2_396m", "pll3_usb_otg", "axi", "pll2_pfd0_352m", };
+static const char *emi_slow_sels[]      = { "axi", "pll3_usb_otg", "pll2_pfd2_396m", "pll2_pfd0_352m", };
 static const char *vdo_axi_sels[]	= { "axi", "ahb", };
 static const char *vpu_axi_sels[]	= { "axi", "pll2_pfd2_396m", "pll2_pfd0_352m", };
 static const char *cko1_sels[]	= { "pll3_usb_otg", "pll2_bus", "pll1_sys", "pll5_video_div",
@@ -392,7 +393,7 @@ static void __init imx6q_clocks_init(struct device_node *ccm_node)
 	clk[usdhc4_sel]       = imx_clk_mux("usdhc4_sel",       base + 0x1c, 19, 1, usdhc_sels,        ARRAY_SIZE(usdhc_sels));
 	clk[enfc_sel]         = imx_clk_mux("enfc_sel",         base + 0x2c, 16, 2, enfc_sels,         ARRAY_SIZE(enfc_sels));
 	clk[emi_sel]          = imx_clk_mux("emi_sel",          base + 0x1c, 27, 2, emi_sels,          ARRAY_SIZE(emi_sels));
-	clk[emi_slow_sel]     = imx_clk_mux("emi_slow_sel",     base + 0x1c, 29, 2, emi_sels,          ARRAY_SIZE(emi_sels));
+	clk[emi_slow_sel]     = imx_clk_mux("emi_slow_sel",     base + 0x1c, 29, 2, emi_slow_sels,     ARRAY_SIZE(emi_slow_sels));
 	clk[vdo_axi_sel]      = imx_clk_mux("vdo_axi_sel",      base + 0x18, 11, 1, vdo_axi_sels,      ARRAY_SIZE(vdo_axi_sels));
 	clk[vpu_axi_sel]      = imx_clk_mux("vpu_axi_sel",      base + 0x18, 14, 2, vpu_axi_sels,      ARRAY_SIZE(vpu_axi_sels));
 	clk[cko1_sel]         = imx_clk_mux("cko1_sel",         base + 0x60, 0,  4, cko1_sels,         ARRAY_SIZE(cko1_sels));

arch/arm/mach-imx/clk-vf610.c

@@ -183,6 +183,8 @@ static void __init vf610_clocks_init(struct device_node *ccm_node)
 	clk[VF610_CLK_ENET_TS_SEL] = imx_clk_mux("enet_ts_sel", CCM_CSCMR2, 0, 3, enet_ts_sels, 7);
 	clk[VF610_CLK_ENET] = imx_clk_gate("enet", "enet_sel", CCM_CSCDR1, 24);
 	clk[VF610_CLK_ENET_TS] = imx_clk_gate("enet_ts", "enet_ts_sel", CCM_CSCDR1, 23);
+	clk[VF610_CLK_ENET0] = imx_clk_gate2("enet0", "ipg_bus", CCM_CCGR9, CCM_CCGRx_CGn(0));
+	clk[VF610_CLK_ENET1] = imx_clk_gate2("enet1", "ipg_bus", CCM_CCGR9, CCM_CCGRx_CGn(1));
 
 	clk[VF610_CLK_PIT] = imx_clk_gate2("pit", "ipg_bus", CCM_CCGR1, CCM_CCGRx_CGn(7));
 

arch/arm/mach-imx/mx27.h

@@ -135,7 +135,7 @@
 #define MX27_INT_GPT4		(NR_IRQS_LEGACY + 4)
 #define MX27_INT_RTIC		(NR_IRQS_LEGACY + 5)
 #define MX27_INT_CSPI3		(NR_IRQS_LEGACY + 6)
-#define MX27_INT_SDHC		(NR_IRQS_LEGACY + 7)
+#define MX27_INT_MSHC		(NR_IRQS_LEGACY + 7)
 #define MX27_INT_GPIO		(NR_IRQS_LEGACY + 8)
 #define MX27_INT_SDHC3		(NR_IRQS_LEGACY + 9)
 #define MX27_INT_SDHC2		(NR_IRQS_LEGACY + 10)

arch/arm/mach-imx/platsmp.c

@@ -53,7 +53,7 @@ void imx_scu_standby_enable(void)
 	writel_relaxed(val, scu_base);
 }
 
-static int __cpuinit imx_boot_secondary(unsigned int cpu, struct task_struct *idle)
+static int imx_boot_secondary(unsigned int cpu, struct task_struct *idle)
 {
 	imx_set_cpu_jump(cpu, v7_secondary_startup);
 	imx_enable_cpu(cpu, true);

arch/arm/mach-keystone/keystone.c

@@ -49,7 +49,7 @@ static const char *keystone_match[] __initconst = {
 	NULL,
 };
 
-void keystone_restart(char mode, const char *cmd)
+void keystone_restart(enum reboot_mode mode, const char *cmd)
 {
 	u32 val;
 

arch/arm/mach-keystone/platsmp.c

@@ -21,7 +21,7 @@
 
 #include "keystone.h"
 
-static int __cpuinit keystone_smp_boot_secondary(unsigned int cpu,
+static int keystone_smp_boot_secondary(unsigned int cpu,
 						struct task_struct *idle)
 {
 	unsigned long start = virt_to_phys(&secondary_startup);

arch/arm/mach-msm/headsmp.S

@@ -11,8 +11,6 @@
 #include <linux/linkage.h>
 #include <linux/init.h>
 
-	__CPUINIT
-
 /*
  * MSM specific entry point for secondary CPUs.  This provides
  * a "holding pen" into which all secondary cores are held until we're

arch/arm/mach-msm/platsmp.c

@@ -38,7 +38,7 @@ static inline int get_core_count(void)
 	return ((read_cpuid_id() >> 4) & 3) + 1;
 }
 
-static void __cpuinit msm_secondary_init(unsigned int cpu)
+static void msm_secondary_init(unsigned int cpu)
 {
 	/*
 	 * let the primary processor know we're out of the
@@ -54,7 +54,7 @@ static void __cpuinit msm_secondary_init(unsigned int cpu)
 	spin_unlock(&boot_lock);
 }
 
-static __cpuinit void prepare_cold_cpu(unsigned int cpu)
+static void prepare_cold_cpu(unsigned int cpu)
 {
 	int ret;
 	ret = scm_set_boot_addr(virt_to_phys(msm_secondary_startup),
@@ -73,7 +73,7 @@ static __cpuinit void prepare_cold_cpu(unsigned int cpu)
 				  "address\n");
 }
 
-static int __cpuinit msm_boot_secondary(unsigned int cpu, struct task_struct *idle)
+static int msm_boot_secondary(unsigned int cpu, struct task_struct *idle)
 {
 	unsigned long timeout;
 	static int cold_boot_done;

arch/arm/mach-msm/timer.c

@@ -139,7 +139,7 @@ static struct clocksource msm_clocksource = {
 };
 
 #ifdef CONFIG_LOCAL_TIMERS
-static int __cpuinit msm_local_timer_setup(struct clock_event_device *evt)
+static int msm_local_timer_setup(struct clock_event_device *evt)
 {
 	/* Use existing clock_event for cpu 0 */
 	if (!smp_processor_id())
@@ -164,7 +164,7 @@ static void msm_local_timer_stop(struct clock_event_device *evt)
 	disable_percpu_irq(evt->irq);
 }
 
-static struct local_timer_ops msm_local_timer_ops __cpuinitdata = {
+static struct local_timer_ops msm_local_timer_ops = {
 	.setup	= msm_local_timer_setup,
 	.stop	= msm_local_timer_stop,
 };

arch/arm/mach-mvebu/coherency.c

@@ -28,7 +28,7 @@
 #include <asm/cacheflush.h>
 #include "armada-370-xp.h"
 
-unsigned long __cpuinitdata coherency_phys_base;
+unsigned long coherency_phys_base;
 static void __iomem *coherency_base;
 static void __iomem *coherency_cpu_base;
 

arch/arm/mach-mvebu/headsmp.S

@@ -21,8 +21,6 @@
 #include <linux/linkage.h>
 #include <linux/init.h>
 
-	__CPUINIT
-
 /*
  * Armada XP specific entry point for secondary CPUs.
  * We add the CPU to the coherency fabric and then jump to secondary

arch/arm/mach-mvebu/platsmp.c

@@ -71,13 +71,12 @@ void __init set_secondary_cpus_clock(void)
 	}
 }
 
-static void __cpuinit armada_xp_secondary_init(unsigned int cpu)
+static void armada_xp_secondary_init(unsigned int cpu)
 {
 	armada_xp_mpic_smp_cpu_init();
 }
 
-static int __cpuinit armada_xp_boot_secondary(unsigned int cpu,
+static int armada_xp_boot_secondary(unsigned int cpu, struct task_struct *idle)
-					      struct task_struct *idle)
 {
 	pr_info("Booting CPU %d\n", cpu);
 

arch/arm/mach-omap2/Kconfig

@@ -62,7 +62,7 @@ config SOC_OMAP5
 	select HAVE_SMP
 	select COMMON_CLK
 	select HAVE_ARM_ARCH_TIMER
-	select ARM_ERRATA_798181
+	select ARM_ERRATA_798181 if SMP
 
 config SOC_AM33XX
 	bool "AM33XX support"

arch/arm/mach-omap2/board-generic.c

@@ -15,6 +15,7 @@
 #include <linux/of_irq.h>
 #include <linux/of_platform.h>
 #include <linux/irqdomain.h>
+#include <linux/clk.h>
 
 #include <asm/mach/arch.h>
 
@@ -35,6 +36,21 @@ static struct of_device_id omap_dt_match_table[] __initdata = {
 	{ }
 };
 
+/*
+ * Create alias for USB host PHY clock.
+ * Remove this when clock phandle can be provided via DT
+ */
+static void __init legacy_init_ehci_clk(char *clkname)
+{
+	int ret;
+
+	ret = clk_add_alias("main_clk", NULL, clkname, NULL);
+	if (ret) {
+		pr_err("%s:Failed to add main_clk alias to %s :%d\n",
+						__func__, clkname, ret);
+	}
+}
+
 static void __init omap_generic_init(void)
 {
 	omap_sdrc_init(NULL, NULL);
@@ -45,10 +61,15 @@ static void __init omap_generic_init(void)
 	 * HACK: call display setup code for selected boards to enable omapdss.
 	 * This will be removed when omapdss supports DT.
 	 */
-	if (of_machine_is_compatible("ti,omap4-panda"))
+	if (of_machine_is_compatible("ti,omap4-panda")) {
 		omap4_panda_display_init_of();
+		legacy_init_ehci_clk("auxclk3_ck");
+
+	}
 	else if (of_machine_is_compatible("ti,omap4-sdp"))
 		omap_4430sdp_display_init_of();
+	else if (of_machine_is_compatible("ti,omap5-uevm"))
+		legacy_init_ehci_clk("auxclk1_ck");
 }
 
 #ifdef CONFIG_SOC_OMAP2420

arch/arm/mach-omap2/omap-headsmp.S

@@ -20,8 +20,6 @@
 
 #include "omap44xx.h"
 
-	__CPUINIT
-
 /* Physical address needed since MMU not enabled yet on secondary core */
 #define AUX_CORE_BOOT0_PA			0x48281800
 

arch/arm/mach-omap2/omap-mpuss-lowpower.c

@@ -291,7 +291,7 @@ int omap4_enter_lowpower(unsigned int cpu, unsigned int power_state)
  * @cpu : CPU ID
  * @power_state: CPU low power state.
  */
-int __cpuinit omap4_hotplug_cpu(unsigned int cpu, unsigned int power_state)
+int omap4_hotplug_cpu(unsigned int cpu, unsigned int power_state)
 {
 	struct omap4_cpu_pm_info *pm_info = &per_cpu(omap4_pm_info, cpu);
 	unsigned int cpu_state = 0;

arch/arm/mach-omap2/omap-smp.c

@@ -51,7 +51,7 @@ void __iomem *omap4_get_scu_base(void)
 	return scu_base;
 }
 
-static void __cpuinit omap4_secondary_init(unsigned int cpu)
+static void omap4_secondary_init(unsigned int cpu)
 {
 	/*
 	 * Configure ACTRL and enable NS SMP bit access on CPU1 on HS device.
@@ -72,7 +72,7 @@ static void __cpuinit omap4_secondary_init(unsigned int cpu)
 	spin_unlock(&boot_lock);
 }
 
-static int __cpuinit omap4_boot_secondary(unsigned int cpu, struct task_struct *idle)
+static int omap4_boot_secondary(unsigned int cpu, struct task_struct *idle)
 {
 	static struct clockdomain *cpu1_clkdm;
 	static bool booted;

arch/arm/mach-omap2/omap-wakeupgen.c

@@ -323,8 +323,8 @@ static void irq_save_secure_context(void)
 #endif
 
 #ifdef CONFIG_HOTPLUG_CPU
-static int __cpuinit irq_cpu_hotplug_notify(struct notifier_block *self,
+static int irq_cpu_hotplug_notify(struct notifier_block *self,
-					 unsigned long action, void *hcpu)
+				  unsigned long action, void *hcpu)
 {
 	unsigned int cpu = (unsigned int)hcpu;
 

arch/arm/mach-prima2/headsmp.S

@@ -9,8 +9,6 @@
 #include <linux/linkage.h>
 #include <linux/init.h>
 
-	__CPUINIT
-
 /*
  * SIRFSOC specific entry point for secondary CPUs.  This provides
  * a "holding pen" into which all secondary cores are held until we're

arch/arm/mach-prima2/platsmp.c

@@ -44,7 +44,7 @@ void __init sirfsoc_map_scu(void)
 	scu_base = (void __iomem *)SIRFSOC_VA(base);
 }
 
-static void __cpuinit sirfsoc_secondary_init(unsigned int cpu)
+static void sirfsoc_secondary_init(unsigned int cpu)
 {
 	/*
 	 * let the primary processor know we're out of the
@@ -65,7 +65,7 @@ static struct of_device_id rsc_ids[]  = {
 	{},
 };
 
-static int __cpuinit sirfsoc_boot_secondary(unsigned int cpu, struct task_struct *idle)
+static int sirfsoc_boot_secondary(unsigned int cpu, struct task_struct *idle)
 {
 	unsigned long timeout;
 	struct device_node *np;

arch/arm/mach-pxa/em-x270.c

@@ -477,16 +477,24 @@ static int em_x270_usb_hub_init(void)
 	/* USB Hub power-on and reset */
 	gpio_direction_output(usb_hub_reset, 1);
 	gpio_direction_output(GPIO9_USB_VBUS_EN, 0);
-	regulator_enable(em_x270_usb_ldo);
+	err = regulator_enable(em_x270_usb_ldo);
+	if (err)
+		goto err_free_rst_gpio;
+
 	gpio_set_value(usb_hub_reset, 0);
 	gpio_set_value(usb_hub_reset, 1);
 	regulator_disable(em_x270_usb_ldo);
-	regulator_enable(em_x270_usb_ldo);
+	err = regulator_enable(em_x270_usb_ldo);
+	if (err)
+		goto err_free_rst_gpio;
+
 	gpio_set_value(usb_hub_reset, 0);
 	gpio_set_value(GPIO9_USB_VBUS_EN, 1);
 
 	return 0;
 
+err_free_rst_gpio:
+	gpio_free(usb_hub_reset);
 err_free_vbus_gpio:
 	gpio_free(GPIO9_USB_VBUS_EN);
 err_free_usb_ldo:
@@ -592,7 +600,7 @@ err_irq:
 	return err;
 }
 
-static void em_x270_mci_setpower(struct device *dev, unsigned int vdd)
+static int em_x270_mci_setpower(struct device *dev, unsigned int vdd)
 {
 	struct pxamci_platform_data* p_d = dev->platform_data;
 
@@ -600,10 +608,11 @@ static void em_x270_mci_setpower(struct device *dev, unsigned int vdd)
 		int vdd_uV = (2000 + (vdd - __ffs(MMC_VDD_20_21)) * 100) * 1000;
 
 		regulator_set_voltage(em_x270_sdio_ldo, vdd_uV, vdd_uV);
-		regulator_enable(em_x270_sdio_ldo);
+		return regulator_enable(em_x270_sdio_ldo);
 	} else {
 		regulator_disable(em_x270_sdio_ldo);
 	}
+	return 0;
 }
 
 static void em_x270_mci_exit(struct device *dev, void *data)

arch/arm/mach-pxa/mainstone.c

@@ -408,7 +408,7 @@ static int mainstone_mci_init(struct device *dev, irq_handler_t mstone_detect_in
 	return err;
 }
 
-static void mainstone_mci_setpower(struct device *dev, unsigned int vdd)
+static int mainstone_mci_setpower(struct device *dev, unsigned int vdd)
 {
 	struct pxamci_platform_data* p_d = dev->platform_data;
 
@@ -420,6 +420,7 @@ static void mainstone_mci_setpower(struct device *dev, unsigned int vdd)
 		printk(KERN_DEBUG "%s: off\n", __func__);
 		MST_MSCWR1 &= ~MST_MSCWR1_MMC_ON;
 	}
+	return 0;
 }
 
 static void mainstone_mci_exit(struct device *dev, void *data)

arch/arm/mach-pxa/pcm990-baseboard.c

@@ -335,7 +335,7 @@ static int pcm990_mci_init(struct device *dev, irq_handler_t mci_detect_int,
 	return err;
 }
 
-static void pcm990_mci_setpower(struct device *dev, unsigned int vdd)
+static int pcm990_mci_setpower(struct device *dev, unsigned int vdd)
 {
 	struct pxamci_platform_data *p_d = dev->platform_data;
 	u8 val;
@@ -348,6 +348,7 @@ static void pcm990_mci_setpower(struct device *dev, unsigned int vdd)
 		val &= ~PCM990_CTRL_MMC2PWR;
 
 	pcm990_cpld_writeb(PCM990_CTRL_MMC2PWR, PCM990_CTRL_REG5);
+	return 0;
 }
 
 static void pcm990_mci_exit(struct device *dev, void *data)

arch/arm/mach-pxa/poodle.c

@@ -258,7 +258,7 @@ err_free_2:
 	return err;
 }
 
-static void poodle_mci_setpower(struct device *dev, unsigned int vdd)
+static int poodle_mci_setpower(struct device *dev, unsigned int vdd)
 {
 	struct pxamci_platform_data* p_d = dev->platform_data;
 
@@ -270,6 +270,8 @@ static void poodle_mci_setpower(struct device *dev, unsigned int vdd)
 		gpio_set_value(POODLE_GPIO_SD_PWR1, 0);
 		gpio_set_value(POODLE_GPIO_SD_PWR, 0);
 	}
+
+	return 0;
 }
 
 static void poodle_mci_exit(struct device *dev, void *data)

arch/arm/mach-pxa/spitz.c

@@ -598,7 +598,7 @@ static inline void spitz_spi_init(void) {}
  * NOTE: The card detect interrupt isn't debounced so we delay it by 250ms to
  * give the card a chance to fully insert/eject.
  */
-static void spitz_mci_setpower(struct device *dev, unsigned int vdd)
+static int spitz_mci_setpower(struct device *dev, unsigned int vdd)
 {
 	struct pxamci_platform_data* p_d = dev->platform_data;
 
@@ -606,6 +606,8 @@ static void spitz_mci_setpower(struct device *dev, unsigned int vdd)
 		spitz_card_pwr_ctrl(SCOOP_CPR_SD_3V, SCOOP_CPR_SD_3V);
 	else
 		spitz_card_pwr_ctrl(SCOOP_CPR_SD_3V, 0x0);
+
+	return 0;
 }
 
 static struct pxamci_platform_data spitz_mci_platform_data = {

arch/arm/mach-pxa/stargate2.c

@@ -734,9 +734,10 @@ static int stargate2_mci_init(struct device *dev,
  *
  * Very simple control. Either it is on or off and is controlled by
  * a gpio pin */
-static void stargate2_mci_setpower(struct device *dev, unsigned int vdd)
+static int stargate2_mci_setpower(struct device *dev, unsigned int vdd)
 {
 	gpio_set_value(SG2_SD_POWER_ENABLE, !!vdd);
+	return 0;
 }
 
 static void stargate2_mci_exit(struct device *dev, void *data)

arch/arm/mach-s3c24xx/Kconfig

@@ -208,7 +208,7 @@ config S3C24XX_GPIO_EXTRA128
 
 config S3C24XX_PLL
 	bool "Support CPUfreq changing of PLL frequency (EXPERIMENTAL)"
-	depends on ARM_S3C24XX
+	depends on ARM_S3C24XX_CPUFREQ
 	help
 	  Compile in support for changing the PLL frequency from the
 	  S3C24XX series CPUfreq driver. The PLL takes time to settle

arch/arm/mach-s3c24xx/clock-s3c2410.c

@@ -119,66 +119,101 @@ static struct clk init_clocks_off[] = {
 	}
 };
 
-static struct clk init_clocks[] = {
+static struct clk clk_lcd = {
-	{
+	.name		= "lcd",
-		.name		= "lcd",
+	.parent		= &clk_h,
-		.parent		= &clk_h,
+	.enable		= s3c2410_clkcon_enable,
-		.enable		= s3c2410_clkcon_enable,
+	.ctrlbit	= S3C2410_CLKCON_LCDC,
-		.ctrlbit	= S3C2410_CLKCON_LCDC,
+};
-	}, {
+
-		.name		= "gpio",
+static struct clk clk_gpio = {
-		.parent		= &clk_p,
+	.name		= "gpio",
-		.enable		= s3c2410_clkcon_enable,
+	.parent		= &clk_p,
-		.ctrlbit	= S3C2410_CLKCON_GPIO,
+	.enable		= s3c2410_clkcon_enable,
-	}, {
+	.ctrlbit	= S3C2410_CLKCON_GPIO,
-		.name		= "usb-host",
+};
-		.parent		= &clk_h,
+
-		.enable		= s3c2410_clkcon_enable,
+static struct clk clk_usb_host = {
-		.ctrlbit	= S3C2410_CLKCON_USBH,
+	.name		= "usb-host",
-	}, {
+	.parent		= &clk_h,
-		.name		= "usb-device",
+	.enable		= s3c2410_clkcon_enable,
-		.parent		= &clk_h,
+	.ctrlbit	= S3C2410_CLKCON_USBH,
-		.enable		= s3c2410_clkcon_enable,
+};
-		.ctrlbit	= S3C2410_CLKCON_USBD,
+
-	}, {
+static struct clk clk_usb_device = {
-		.name		= "timers",
+	.name		= "usb-device",
-		.parent		= &clk_p,
+	.parent		= &clk_h,
-		.enable		= s3c2410_clkcon_enable,
+	.enable		= s3c2410_clkcon_enable,
-		.ctrlbit	= S3C2410_CLKCON_PWMT,
+	.ctrlbit	= S3C2410_CLKCON_USBD,
-	}, {
+};
-		.name		= "uart",
+
-		.devname	= "s3c2410-uart.0",
+static struct clk clk_timers = {
-		.parent		= &clk_p,
+	.name		= "timers",
-		.enable		= s3c2410_clkcon_enable,
+	.parent		= &clk_p,
-		.ctrlbit	= S3C2410_CLKCON_UART0,
+	.enable		= s3c2410_clkcon_enable,
-	}, {
+	.ctrlbit	= S3C2410_CLKCON_PWMT,
-		.name		= "uart",
+};
-		.devname	= "s3c2410-uart.1",
+
-		.parent		= &clk_p,
+struct clk s3c24xx_clk_uart0 = {
-		.enable		= s3c2410_clkcon_enable,
+	.name		= "uart",
-		.ctrlbit	= S3C2410_CLKCON_UART1,
+	.devname	= "s3c2410-uart.0",
-	}, {
+	.parent		= &clk_p,
-		.name		= "uart",
+	.enable		= s3c2410_clkcon_enable,
-		.devname	= "s3c2410-uart.2",
+	.ctrlbit	= S3C2410_CLKCON_UART0,
-		.parent		= &clk_p,
+};
-		.enable		= s3c2410_clkcon_enable,
+
-		.ctrlbit	= S3C2410_CLKCON_UART2,
+struct clk s3c24xx_clk_uart1 = {
-	}, {
+	.name		= "uart",
-		.name		= "rtc",
+	.devname	= "s3c2410-uart.1",
-		.parent		= &clk_p,
+	.parent		= &clk_p,
-		.enable		= s3c2410_clkcon_enable,
+	.enable		= s3c2410_clkcon_enable,
-		.ctrlbit	= S3C2410_CLKCON_RTC,
+	.ctrlbit	= S3C2410_CLKCON_UART1,
-	}, {
+};
-		.name		= "watchdog",
+
-		.parent		= &clk_p,
+struct clk s3c24xx_clk_uart2 = {
-		.ctrlbit	= 0,
+	.name		= "uart",
-	}, {
+	.devname	= "s3c2410-uart.2",
-		.name		= "usb-bus-host",
+	.parent		= &clk_p,
-		.parent		= &clk_usb_bus,
+	.enable		= s3c2410_clkcon_enable,
-	}, {
+	.ctrlbit	= S3C2410_CLKCON_UART2,
-		.name		= "usb-bus-gadget",
+};
-		.parent		= &clk_usb_bus,
+
-	},
+static struct clk clk_rtc = {
+	.name		= "rtc",
+	.parent		= &clk_p,
+	.enable		= s3c2410_clkcon_enable,
+	.ctrlbit	= S3C2410_CLKCON_RTC,
+};
+
+static struct clk clk_watchdog = {
+	.name		= "watchdog",
+	.parent		= &clk_p,
+	.ctrlbit	= 0,
+};
+
+static struct clk clk_usb_bus_host = {
+	.name		= "usb-bus-host",
+	.parent		= &clk_usb_bus,
+};
+
+static struct clk clk_usb_bus_gadget = {
+	.name		= "usb-bus-gadget",
+	.parent		= &clk_usb_bus,
+};
+
+static struct clk *init_clocks[] = {
+	&clk_lcd,
+	&clk_gpio,
+	&clk_usb_host,
+	&clk_usb_device,
+	&clk_timers,
+	&s3c24xx_clk_uart0,
+	&s3c24xx_clk_uart1,
+	&s3c24xx_clk_uart2,
+	&clk_rtc,
+	&clk_watchdog,
+	&clk_usb_bus_host,
+	&clk_usb_bus_gadget,
 };
 
 /* s3c2410_baseclk_add()
@@ -195,7 +230,6 @@ int __init s3c2410_baseclk_add(void)
 {
 	unsigned long clkslow = __raw_readl(S3C2410_CLKSLOW);
 	unsigned long clkcon  = __raw_readl(S3C2410_CLKCON);
-	struct clk *clkp;
 	struct clk *xtal;
 	int ret;
 	int ptr;
@@ -207,8 +241,9 @@ int __init s3c2410_baseclk_add(void)
 
 	/* register clocks from clock array */
 
-	clkp = init_clocks;
+	for (ptr = 0; ptr < ARRAY_SIZE(init_clocks); ptr++) {
-	for (ptr = 0; ptr < ARRAY_SIZE(init_clocks); ptr++, clkp++) {
+		struct clk *clkp = init_clocks[ptr];
+
 		/* ensure that we note the clock state */
 
 		clkp->usage = clkcon & clkp->ctrlbit ? 1 : 0;

arch/arm/mach-s3c24xx/clock-s3c2440.c

@@ -166,6 +166,9 @@ static struct clk_lookup s3c2440_clk_lookup[] = {
 	CLKDEV_INIT(NULL, "clk_uart_baud1", &s3c24xx_uclk),
 	CLKDEV_INIT(NULL, "clk_uart_baud2", &clk_p),
 	CLKDEV_INIT(NULL, "clk_uart_baud3", &s3c2440_clk_fclk_n),
+	CLKDEV_INIT("s3c2440-uart.0", "uart", &s3c24xx_clk_uart0),
+	CLKDEV_INIT("s3c2440-uart.1", "uart", &s3c24xx_clk_uart1),
+	CLKDEV_INIT("s3c2440-uart.2", "uart", &s3c24xx_clk_uart2),
 	CLKDEV_INIT("s3c2440-camif", "camera", &s3c2440_clk_cam_upll),
 };
 

arch/arm/mach-shmobile/headsmp-scu.S

@@ -23,7 +23,6 @@
 #include <linux/init.h>
 #include <asm/memory.h>
 
-	__CPUINIT
 /*
  * Boot code for secondary CPUs.
  *

arch/arm/mach-shmobile/headsmp.S

@@ -14,8 +14,6 @@
 #include <linux/init.h>
 #include <asm/memory.h>
 
-	__CPUINIT
-
 ENTRY(shmobile_invalidate_start)
 	bl	v7_invalidate_l1
 	b	secondary_startup