iv/linux
1
0
Fork 0
Code Issues Pull Requests Actions Packages Projects Releases Wiki Activity

dt-bindings: iio: adc: Add docs for AD7768-1

Browse Source 
Document support for AD7768-1 Analog to Digital Converter.

Signed-off-by: Stefan Popa <stefan.popa@analog.com>
Reviewed-by: Rob Herring <robh@kernel.org>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
This commit is contained in:
Stefan Popa 2019-01-31 18:21:42 +02:00 committed by Jonathan Cameron
parent a5f8c7da3d
commit b64d973008
2 changed files with 42 additions and 0 deletions
Show Stats Download Patch File Download Diff File Expand all files Collapse all files

41
Documentation/devicetree/bindings/iio/adc/adi,ad7768-1.txt Normal file
View File

@ -0,0 +1,41 @@
Analog Devices AD7768-1 ADC device driver
Required properties for the AD7768-1:
- compatible: Must be "adi,ad7768-1"
- reg: SPI chip select number for the device
- spi-max-frequency: Max SPI frequency to use
see: Documentation/devicetree/bindings/spi/spi-bus.txt
- clocks: phandle to the master clock (mclk)
see: Documentation/devicetree/bindings/clock/clock-bindings.txt
- clock-names: Must be "mclk".
- interrupts: IRQ line for the ADC
see: Documentation/devicetree/bindings/interrupt-controller/interrupts.txt
- vref-supply: vref supply can be used as reference for conversion
- adi,sync-in-gpios: must be the device tree identifier of the SYNC-IN pin. Enables
synchronization of multiple devices that require simultaneous sampling.
A pulse is always required if the configuration is changed in any way, for example
if the filter decimation rate changes. As the line is active low, it should
be marked GPIO_ACTIVE_LOW.
Optional properties:
- reset-gpios : GPIO spec for the RESET pin. If specified, it will be asserted during
driver probe. As the line is active low, it should be marked GPIO_ACTIVE_LOW.
Example:
adc@0 {
compatible = "adi,ad7768-1";
reg = <0>;
spi-max-frequency = <2000000>;
spi-cpol;
spi-cpha;
vref-supply = <&adc_vref>;
interrupts = <25 IRQ_TYPE_EDGE_RISING>;
interrupt-parent = <&gpio>;
adi,sync-in-gpios = <&gpio 22 GPIO_ACTIVE_LOW>;
reset-gpios = <&gpio 27 GPIO_ACTIVE_LOW>;
clocks = <&ad7768_mclk>;
clock-names = "mclk";
};

1
MAINTAINERS
View File

@ -868,6 +868,7 @@ L: linux-iio@vger.kernel.org
W: http://ez.analog.com/community/linux-device-drivers
S: Supported
F: drivers/iio/adc/ad7768-1.c
F: Documentation/devicetree/bindings/iio/adc/adi,ad7768-1.txt
ANALOG DEVICES INC AD9389B DRIVER
M: Hans Verkuil <hans.verkuil@cisco.com>