iv/linux
1
0
Fork 0
Code Issues Pull Requests Actions Packages Projects Releases Wiki Activity

arm64: dts: qcom: qrb2210-rb1: switch I2C2 to i2c-gpio

Browse Source 
On the Qualcomm RB1 platform the I2C bus connected to the LT9611UXC
bridge under some circumstances can go into a state when all transfers
timeout. This causes both issues with fetching of EDID and with
updating of the bridge's firmware. While we are debugging the issue,
switch corresponding I2C bus to use i2c-gpio driver. While using
i2c-gpio no communication issues are observed.

This patch is asusmed to be a temporary fix, so it is implemented in a
non-intrusive manner to simply reverting it later.

Fixes: 616eda24edd4 ("arm64: dts: qcom: qrb2210-rb1: Set up HDMI")
Cc: stable@vger.kernel.org
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Reviewed-by: Caleb Connolly <caleb.connolly@linaro.org>
Link: https://lore.kernel.org/r/20240605-rb12-i2c2g-pio-v2-1-946f5d6b6948@linaro.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
This commit is contained in:
Dmitry Baryshkov 2024-06-05 11:55:56 +03:00 committed by Bjorn Andersson
parent 3c61c786d2
commit b7b545ccc0
1 changed files with 12 additions and 1 deletions
Show Stats Download Patch File Download Diff File Expand all files Collapse all files

13
arch/arm64/boot/dts/qcom/qrb2210-rb1.dts
View File

@ -59,6 +59,17 @@
};
};
i2c2_gpio: i2c {
compatible = "i2c-gpio";
sda-gpios = <&tlmm 6 GPIO_ACTIVE_HIGH>;
scl-gpios = <&tlmm 7 GPIO_ACTIVE_HIGH>;
#address-cells = <1>;
#size-cells = <0>;
status = "disabled";
};
leds {
compatible = "gpio-leds";
@ -199,7 +210,7 @@
status = "okay";
};
&i2c2 {
&i2c2_gpio {
clock-frequency = <400000>;
status = "okay";