iv/linux
1
0
Fork 0
Code Issues Pull Requests Actions Packages Projects Releases Wiki Activity

power: supply: collie_battery: Convert to GPIO descriptors

Browse Source 
This converts the Collie battery driver to use GPIO descriptors.
We use a mixture of 3 GPIOs defined in the machine and 3
GPIOs requested directly from the ucb1x00 chip.

Cc: Robert Jarzmik <robert.jarzmik@free.fr>
Cc: Dmitry Eremin-Solenikov <dbaryshkov@gmail.com>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
This commit is contained in:
Linus Walleij 2020-10-30 15:34:01 +01:00 committed by Sebastian Reichel
parent b2f6cb78ea
commit ba940ed832
2 changed files with 130 additions and 42 deletions
Show Stats Download Patch File Download Diff File Expand all files Collapse all files

21
arch/arm/mach-sa1100/collie.c
View File

@ -98,6 +98,26 @@ static struct mcp_plat_data collie_mcp_data = {
.codec_pdata = &collie_ucb1x00_data,
};
/* Battery management GPIOs */
static struct gpiod_lookup_table collie_battery_gpiod_table = {
/* the MCP codec mcp0 has the ucb1x00 as attached device */
.dev_id = "ucb1x00",
.table = {
/* This is found on the main GPIO on the SA1100 */
GPIO_LOOKUP("gpio", COLLIE_GPIO_CO,
"main battery full", GPIO_ACTIVE_HIGH),
GPIO_LOOKUP("gpio", COLLIE_GPIO_MAIN_BAT_LOW,
"main battery low", GPIO_ACTIVE_HIGH),
/*
* This is GPIO 0 on the Scoop expander, which is registered
* from common/scoop.c with this gpio chip label.
*/
GPIO_LOOKUP("sharp-scoop", 0,
"main charge on", GPIO_ACTIVE_HIGH),
{ },
},
};
static int collie_ir_startup(struct device *dev)
{
int rc = gpio_request(COLLIE_GPIO_IR_ON, "IrDA");
@ -395,6 +415,7 @@ static void __init collie_init(void)
platform_scoop_config = &collie_pcmcia_config;
gpiod_add_lookup_table(&collie_power_gpiod_table);
gpiod_add_lookup_table(&collie_battery_gpiod_table);
ret = platform_add_devices(devices, ARRAY_SIZE(devices));
if (ret) {

151
drivers/power/supply/collie_battery.c
View File

@ -12,7 +12,9 @@
#include <linux/delay.h>
#include <linux/spinlock.h>
#include <linux/interrupt.h>
#include <linux/gpio.h>
#include <linux/gpio/driver.h>
#include <linux/gpio/machine.h>
#include <linux/gpio/consumer.h>
#include <linux/mfd/ucb1x00.h>
#include <asm/mach/sharpsl_param.h>
@ -31,18 +33,18 @@ struct collie_bat {
struct mutex work_lock; /* protects data */
bool (*is_present)(struct collie_bat *bat);
int gpio_full;
int gpio_charge_on;
struct gpio_desc *gpio_full;
struct gpio_desc *gpio_charge_on;
int technology;
int gpio_bat;
struct gpio_desc *gpio_bat;
int adc_bat;
int adc_bat_divider;
int bat_max;
int bat_min;
int gpio_temp;
struct gpio_desc *gpio_temp;
int adc_temp;
int adc_temp_divider;
};
@ -53,15 +55,15 @@ static unsigned long collie_read_bat(struct collie_bat *bat)
{
unsigned long value = 0;
if (bat->gpio_bat < 0 || bat->adc_bat < 0)
if (!bat->gpio_bat || bat->adc_bat < 0)
return 0;
mutex_lock(&bat_lock);
gpio_set_value(bat->gpio_bat, 1);
gpiod_set_value(bat->gpio_bat, 1);
msleep(5);
ucb1x00_adc_enable(ucb);
value = ucb1x00_adc_read(ucb, bat->adc_bat, UCB_SYNC);
ucb1x00_adc_disable(ucb);
gpio_set_value(bat->gpio_bat, 0);
gpiod_set_value(bat->gpio_bat, 0);
mutex_unlock(&bat_lock);
value = value * 1000000 / bat->adc_bat_divider;
@ -71,16 +73,16 @@ static unsigned long collie_read_bat(struct collie_bat *bat)
static unsigned long collie_read_temp(struct collie_bat *bat)
{
unsigned long value = 0;
if (bat->gpio_temp < 0 || bat->adc_temp < 0)
if (!bat->gpio_temp || bat->adc_temp < 0)
return 0;
mutex_lock(&bat_lock);
gpio_set_value(bat->gpio_temp, 1);
gpiod_set_value(bat->gpio_temp, 1);
msleep(5);
ucb1x00_adc_enable(ucb);
value = ucb1x00_adc_read(ucb, bat->adc_temp, UCB_SYNC);
ucb1x00_adc_disable(ucb);
gpio_set_value(bat->gpio_temp, 0);
gpiod_set_value(bat->gpio_temp, 0);
mutex_unlock(&bat_lock);
value = value * 10000 / bat->adc_temp_divider;
@ -162,23 +164,23 @@ static void collie_bat_update(struct collie_bat *bat)
bat->full_chrg = -1;
} else if (power_supply_am_i_supplied(psy)) {
if (bat->status == POWER_SUPPLY_STATUS_DISCHARGING) {
gpio_set_value(bat->gpio_charge_on, 1);
gpiod_set_value(bat->gpio_charge_on, 1);
mdelay(15);
}
if (gpio_get_value(bat->gpio_full)) {
if (gpiod_get_value(bat->gpio_full)) {
if (old == POWER_SUPPLY_STATUS_CHARGING ||
bat->full_chrg == -1)
bat->full_chrg = collie_read_bat(bat);
gpio_set_value(bat->gpio_charge_on, 0);
gpiod_set_value(bat->gpio_charge_on, 0);
bat->status = POWER_SUPPLY_STATUS_FULL;
} else {
gpio_set_value(bat->gpio_charge_on, 1);
gpiod_set_value(bat->gpio_charge_on, 1);
bat->status = POWER_SUPPLY_STATUS_CHARGING;
}
} else {
gpio_set_value(bat->gpio_charge_on, 0);
gpiod_set_value(bat->gpio_charge_on, 0);
bat->status = POWER_SUPPLY_STATUS_DISCHARGING;
}
@ -230,18 +232,18 @@ static struct collie_bat collie_bat_main = {
.full_chrg = -1,
.psy = NULL,
.gpio_full = COLLIE_GPIO_CO,
.gpio_charge_on = COLLIE_GPIO_CHARGE_ON,
.gpio_full = NULL,
.gpio_charge_on = NULL,
.technology = POWER_SUPPLY_TECHNOLOGY_LIPO,
.gpio_bat = COLLIE_GPIO_MBAT_ON,
.gpio_bat = NULL,
.adc_bat = UCB_ADC_INP_AD1,
.adc_bat_divider = 155,
.bat_max = 4310000,
.bat_min = 1551 * 1000000 / 414,
.gpio_temp = COLLIE_GPIO_TMP_ON,
.gpio_temp = NULL,
.adc_temp = UCB_ADC_INP_AD0,
.adc_temp_divider = 10000,
};
@ -260,30 +262,24 @@ static struct collie_bat collie_bat_bu = {
.full_chrg = -1,
.psy = NULL,
.gpio_full = -1,
.gpio_charge_on = -1,
.gpio_full = NULL,
.gpio_charge_on = NULL,
.technology = POWER_SUPPLY_TECHNOLOGY_LiMn,
.gpio_bat = COLLIE_GPIO_BBAT_ON,
.gpio_bat = NULL,
.adc_bat = UCB_ADC_INP_AD1,
.adc_bat_divider = 155,
.bat_max = 3000000,
.bat_min = 1900000,
.gpio_temp = -1,
.gpio_temp = NULL,
.adc_temp = -1,
.adc_temp_divider = -1,
};
static struct gpio collie_batt_gpios[] = {
{ COLLIE_GPIO_CO, GPIOF_IN, "main battery full" },
{ COLLIE_GPIO_MAIN_BAT_LOW, GPIOF_IN, "main battery low" },
{ COLLIE_GPIO_CHARGE_ON, GPIOF_OUT_INIT_LOW, "main charge on" },
{ COLLIE_GPIO_MBAT_ON, GPIOF_OUT_INIT_LOW, "main battery" },
{ COLLIE_GPIO_TMP_ON, GPIOF_OUT_INIT_LOW, "main battery temp" },
{ COLLIE_GPIO_BBAT_ON, GPIOF_OUT_INIT_LOW, "backup battery" },
};
/* Obtained but unused GPIO */
static struct gpio_desc *collie_mbat_low;
#ifdef CONFIG_PM
static int wakeup_enabled;
@ -295,7 +291,7 @@ static int collie_bat_suspend(struct ucb1x00_dev *dev)
if (device_may_wakeup(&dev->ucb->dev) &&
collie_bat_main.status == POWER_SUPPLY_STATUS_CHARGING)
wakeup_enabled = !enable_irq_wake(gpio_to_irq(COLLIE_GPIO_CO));
wakeup_enabled = !enable_irq_wake(gpiod_to_irq(collie_bat_main.gpio_full));
else
wakeup_enabled = 0;
@ -305,7 +301,7 @@ static int collie_bat_suspend(struct ucb1x00_dev *dev)
static int collie_bat_resume(struct ucb1x00_dev *dev)
{
if (wakeup_enabled)
disable_irq_wake(gpio_to_irq(COLLIE_GPIO_CO));
disable_irq_wake(gpiod_to_irq(collie_bat_main.gpio_full));
/* things may have changed while we were away */
schedule_work(&bat_work);
@ -320,16 +316,71 @@ static int collie_bat_probe(struct ucb1x00_dev *dev)
{
int ret;
struct power_supply_config psy_main_cfg = {}, psy_bu_cfg = {};
struct gpio_chip *gc = &dev->ucb->gpio;
if (!machine_is_collie())
return -ENODEV;
ucb = dev->ucb;
ret = gpio_request_array(collie_batt_gpios,
ARRAY_SIZE(collie_batt_gpios));
if (ret)
return ret;
/* Obtain all the main battery GPIOs */
collie_bat_main.gpio_full = gpiod_get(&dev->ucb->dev,
"main battery full",
GPIOD_IN);
if (IS_ERR(collie_bat_main.gpio_full))
return PTR_ERR(collie_bat_main.gpio_full);
collie_mbat_low = gpiod_get(&dev->ucb->dev,
"main battery low",
GPIOD_IN);
if (IS_ERR(collie_mbat_low)) {
ret = PTR_ERR(collie_mbat_low);
goto err_put_gpio_full;
}
collie_bat_main.gpio_charge_on = gpiod_get(&dev->ucb->dev,
"main charge on",
GPIOD_OUT_LOW);
if (IS_ERR(collie_bat_main.gpio_charge_on)) {
ret = PTR_ERR(collie_bat_main.gpio_charge_on);
goto err_put_mbat_low;
}
/* COLLIE_GPIO_MBAT_ON = GPIO 7 on the UCB (TC35143) */
collie_bat_main.gpio_bat = gpiochip_request_own_desc(gc,
7,
"main battery",
GPIO_ACTIVE_HIGH,
GPIOD_OUT_LOW);
if (IS_ERR(collie_bat_main.gpio_bat)) {
ret = PTR_ERR(collie_bat_main.gpio_bat);
goto err_put_gpio_charge_on;
}
/* COLLIE_GPIO_TMP_ON = GPIO 9 on the UCB (TC35143) */
collie_bat_main.gpio_temp = gpiochip_request_own_desc(gc,
9,
"main battery temp",
GPIO_ACTIVE_HIGH,
GPIOD_OUT_LOW);
if (IS_ERR(collie_bat_main.gpio_temp)) {
ret = PTR_ERR(collie_bat_main.gpio_temp);
goto err_free_gpio_bat;
}
/*
* Obtain the backup battery COLLIE_GPIO_BBAT_ON which is
* GPIO 8 on the UCB (TC35143)
*/
collie_bat_bu.gpio_bat = gpiochip_request_own_desc(gc,
8,
"backup battery",
GPIO_ACTIVE_HIGH,
GPIOD_OUT_LOW);
if (IS_ERR(collie_bat_bu.gpio_bat)) {
ret = PTR_ERR(collie_bat_bu.gpio_bat);
goto err_free_gpio_temp;
}
mutex_init(&collie_bat_main.work_lock);
@ -370,27 +421,43 @@ err_irq:
err_psy_reg_bu:
power_supply_unregister(collie_bat_main.psy);
err_psy_reg_main:
/* see comment in collie_bat_remove */
cancel_work_sync(&bat_work);
gpio_free_array(collie_batt_gpios, ARRAY_SIZE(collie_batt_gpios));
gpiochip_free_own_desc(collie_bat_bu.gpio_bat);
err_free_gpio_temp:
gpiochip_free_own_desc(collie_bat_main.gpio_temp);
err_free_gpio_bat:
gpiochip_free_own_desc(collie_bat_main.gpio_bat);
err_put_gpio_charge_on:
gpiod_put(collie_bat_main.gpio_charge_on);
err_put_mbat_low:
gpiod_put(collie_mbat_low);
err_put_gpio_full:
gpiod_put(collie_bat_main.gpio_full);
return ret;
}
static void collie_bat_remove(struct ucb1x00_dev *dev)
{
free_irq(gpio_to_irq(COLLIE_GPIO_CO), &collie_bat_main);
power_supply_unregister(collie_bat_bu.psy);
power_supply_unregister(collie_bat_main.psy);
/* These are obtained from the machine */
gpiod_put(collie_bat_main.gpio_full);
gpiod_put(collie_mbat_low);
gpiod_put(collie_bat_main.gpio_charge_on);
/* These are directly from the UCB so let's free them */
gpiochip_free_own_desc(collie_bat_main.gpio_bat);
gpiochip_free_own_desc(collie_bat_main.gpio_temp);
gpiochip_free_own_desc(collie_bat_bu.gpio_bat);
/*
* Now cancel the bat_work. We won't get any more schedules,
* since all sources (isr and external_power_changed) are
* unregistered now.
*/
cancel_work_sync(&bat_work);
gpio_free_array(collie_batt_gpios, ARRAY_SIZE(collie_batt_gpios));
}
static struct ucb1x00_driver collie_bat_driver = {