arm64: dts: rockchip: rk3588s: Add USB3 host controller
RK3588 has three USB3 controllers. This adds the host-only controller, which is using the naneng-combphy shared with PCIe and SATA. The other two are dual-role and using a different PHY that is not yet supported upstream. Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com> Link: https://lore.kernel.org/r/20231020150022.48725-4-sebastian.reichel@collabora.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
This commit is contained in:
parent
97789b93b7
commit
bbd3778da1
@ -443,6 +443,27 @@
|
||||
status = "disabled";
|
||||
};
|
||||
|
||||
usb_host2_xhci: usb@fcd00000 {
|
||||
compatible = "rockchip,rk3588-dwc3", "snps,dwc3";
|
||||
reg = <0x0 0xfcd00000 0x0 0x400000>;
|
||||
interrupts = <GIC_SPI 222 IRQ_TYPE_LEVEL_HIGH 0>;
|
||||
clocks = <&cru REF_CLK_USB3OTG2>, <&cru SUSPEND_CLK_USB3OTG2>,
|
||||
<&cru ACLK_USB3OTG2>, <&cru CLK_UTMI_OTG2>,
|
||||
<&cru CLK_PIPEPHY2_PIPE_U3_G>;
|
||||
clock-names = "ref_clk", "suspend_clk", "bus_clk", "utmi", "pipe";
|
||||
dr_mode = "host";
|
||||
phys = <&combphy2_psu PHY_TYPE_USB3>;
|
||||
phy-names = "usb3-phy";
|
||||
phy_type = "utmi_wide";
|
||||
resets = <&cru SRST_A_USB3OTG2>;
|
||||
snps,dis_enblslpm_quirk;
|
||||
snps,dis-u2-freeclk-exists-quirk;
|
||||
snps,dis-del-phy-power-chg-quirk;
|
||||
snps,dis-tx-ipgap-linecheck-quirk;
|
||||
snps,dis_rxdet_inp3_quirk;
|
||||
status = "disabled";
|
||||
};
|
||||
|
||||
sys_grf: syscon@fd58c000 {
|
||||
compatible = "rockchip,rk3588-sys-grf", "syscon";
|
||||
reg = <0x0 0xfd58c000 0x0 0x1000>;
|
||||
|
Loading…
Reference in New Issue
Block a user