dt-bindings: remoteproc: qcom,q6v5: Move MSM8996 to schema
Convert MSM8996 and similar (MSM8998/SDM845) MSS PIL bindings to schema. Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Signed-off-by: Sibi Sankar <quic_sibis@quicinc.com> Signed-off-by: Bjorn Andersson <andersson@kernel.org> Link: https://lore.kernel.org/r/20230117085840.32356-2-quic_sibis@quicinc.com
This commit is contained in:
parent
7eddedc975
commit
bdea142295
@ -0,0 +1,377 @@
|
||||
# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
|
||||
%YAML 1.2
|
||||
---
|
||||
$id: http://devicetree.org/schemas/remoteproc/qcom,msm8996-mss-pil.yaml#
|
||||
$schema: http://devicetree.org/meta-schemas/core.yaml#
|
||||
|
||||
title: Qualcomm MSM8996 MSS Peripheral Image Loader (and similar)
|
||||
|
||||
maintainers:
|
||||
- Bjorn Andersson <andersson@kernel.org>
|
||||
- Sibi Sankar <quic_sibis@quicinc.com>
|
||||
|
||||
description:
|
||||
MSS Peripheral Image Loader loads and boots firmware on the
|
||||
Qualcomm Technology Inc. MSM8996 Modem Hexagon Core (and similar).
|
||||
|
||||
properties:
|
||||
compatible:
|
||||
enum:
|
||||
- qcom,msm8996-mss-pil
|
||||
- qcom,msm8998-mss-pil
|
||||
- qcom,sdm845-mss-pil
|
||||
|
||||
reg:
|
||||
items:
|
||||
- description: MSS QDSP6 registers
|
||||
- description: RMB registers
|
||||
|
||||
reg-names:
|
||||
items:
|
||||
- const: qdsp6
|
||||
- const: rmb
|
||||
|
||||
iommus:
|
||||
items:
|
||||
- description: MSA Stream 1
|
||||
- description: MSA Stream 2
|
||||
|
||||
interrupts:
|
||||
items:
|
||||
- description: Watchdog interrupt
|
||||
- description: Fatal interrupt
|
||||
- description: Ready interrupt
|
||||
- description: Handover interrupt
|
||||
- description: Stop acknowledge interrupt
|
||||
- description: Shutdown acknowledge interrupt
|
||||
|
||||
interrupt-names:
|
||||
items:
|
||||
- const: wdog
|
||||
- const: fatal
|
||||
- const: ready
|
||||
- const: handover
|
||||
- const: stop-ack
|
||||
- const: shutdown-ack
|
||||
|
||||
clocks:
|
||||
minItems: 8
|
||||
maxItems: 9
|
||||
|
||||
clock-names:
|
||||
minItems: 8
|
||||
maxItems: 9
|
||||
|
||||
power-domains:
|
||||
items:
|
||||
- description: CX power domain
|
||||
- description: MX power domain
|
||||
- description: MSS power domain (only valid for qcom,sdm845-mss-pil)
|
||||
minItems: 2
|
||||
|
||||
power-domain-names:
|
||||
items:
|
||||
- const: cx
|
||||
- const: mx
|
||||
- const: mss # only valid for qcom,sdm845-mss-pil
|
||||
minItems: 2
|
||||
|
||||
pll-supply:
|
||||
description: PLL supply
|
||||
|
||||
resets:
|
||||
items:
|
||||
- description: AOSS restart
|
||||
- description: PDC reset (only valid for qcom,sdm845-mss-pil)
|
||||
minItems: 1
|
||||
|
||||
reset-names:
|
||||
items:
|
||||
- const: mss_restart
|
||||
- const: pdc_reset # only valid for qcom,sdm845-mss-pil
|
||||
minItems: 1
|
||||
|
||||
qcom,qmp:
|
||||
$ref: /schemas/types.yaml#/definitions/phandle
|
||||
description: Reference to the AOSS side-channel message RAM.
|
||||
|
||||
qcom,smem-states:
|
||||
$ref: /schemas/types.yaml#/definitions/phandle-array
|
||||
description: States used by the AP to signal the Hexagon core
|
||||
items:
|
||||
- description: Stop modem
|
||||
|
||||
qcom,smem-state-names:
|
||||
description: Names of the states used by the AP to signal the Hexagon core
|
||||
items:
|
||||
- const: stop
|
||||
|
||||
qcom,halt-regs:
|
||||
$ref: /schemas/types.yaml#/definitions/phandle-array
|
||||
description:
|
||||
Halt registers are used to halt transactions of various sub-components
|
||||
within MSS.
|
||||
items:
|
||||
- items:
|
||||
- description: phandle to TCSR syscon region
|
||||
- description: offset to the Q6 halt register
|
||||
- description: offset to the modem halt register
|
||||
- description: offset to the nc halt register
|
||||
|
||||
memory-region:
|
||||
items:
|
||||
- description: MBA reserved region
|
||||
- description: Modem reserved region
|
||||
|
||||
firmware-name:
|
||||
$ref: /schemas/types.yaml#/definitions/string-array
|
||||
items:
|
||||
- description: Name of MBA firmware
|
||||
- description: Name of modem firmware
|
||||
|
||||
smd-edge:
|
||||
$ref: /schemas/remoteproc/qcom,smd-edge.yaml#
|
||||
description:
|
||||
Qualcomm Shared Memory subnode which represents communication edge,
|
||||
channels and devices related to the Modem.
|
||||
unevaluatedProperties: false
|
||||
|
||||
glink-edge:
|
||||
$ref: /schemas/remoteproc/qcom,glink-edge.yaml#
|
||||
description:
|
||||
Qualcomm G-Link subnode which represents communication edge, channels
|
||||
and devices related to the Modem.
|
||||
unevaluatedProperties: false
|
||||
|
||||
# Deprecated properties
|
||||
mba:
|
||||
type: object
|
||||
description:
|
||||
MBA reserved region
|
||||
|
||||
properties:
|
||||
memory-region: true
|
||||
|
||||
required:
|
||||
- memory-region
|
||||
|
||||
additionalProperties: false
|
||||
deprecated: true
|
||||
|
||||
mpss:
|
||||
type: object
|
||||
description:
|
||||
MPSS reserved region
|
||||
|
||||
properties:
|
||||
memory-region: true
|
||||
|
||||
required:
|
||||
- memory-region
|
||||
|
||||
additionalProperties: false
|
||||
deprecated: true
|
||||
|
||||
required:
|
||||
- compatible
|
||||
- reg
|
||||
- reg-names
|
||||
- interrupts
|
||||
- interrupt-names
|
||||
- clocks
|
||||
- clock-names
|
||||
- power-domains
|
||||
- power-domain-names
|
||||
- resets
|
||||
- reset-names
|
||||
- qcom,halt-regs
|
||||
- qcom,smem-states
|
||||
- qcom,smem-state-names
|
||||
|
||||
allOf:
|
||||
- if:
|
||||
properties:
|
||||
compatible:
|
||||
const: qcom,msm8996-mss-pil
|
||||
then:
|
||||
properties:
|
||||
clocks:
|
||||
items:
|
||||
- description: GCC MSS IFACE clock
|
||||
- description: GCC MSS BUS clock
|
||||
- description: GCC MSS MEM clock
|
||||
- description: RPMH XO clock
|
||||
- description: GCC MSS GPLL0 clock
|
||||
- description: GCC MSS SNOC_AXI clock
|
||||
- description: GCC MSS MNOC_AXI clock
|
||||
- description: RPMH PNOC clock
|
||||
- description: GCC MSS PRNG clock
|
||||
- description: RPMH QDSS clock
|
||||
clock-names:
|
||||
items:
|
||||
- const: iface
|
||||
- const: bus
|
||||
- const: mem
|
||||
- const: xo
|
||||
- const: gpll0_mss
|
||||
- const: snoc_axi
|
||||
- const: mnoc_axi
|
||||
- const: pnoc
|
||||
- const: qdss
|
||||
glink-edge: false
|
||||
required:
|
||||
- pll-supply
|
||||
- smd-edge
|
||||
else:
|
||||
properties:
|
||||
pll-supply: false
|
||||
smd-edge: false
|
||||
|
||||
- if:
|
||||
properties:
|
||||
compatible:
|
||||
const: qcom,msm8998-mss-pil
|
||||
then:
|
||||
properties:
|
||||
clocks:
|
||||
items:
|
||||
- description: GCC MSS IFACE clock
|
||||
- description: GCC MSS BUS clock
|
||||
- description: GCC MSS MEM clock
|
||||
- description: GCC MSS GPLL0 clock
|
||||
- description: GCC MSS SNOC_AXI clock
|
||||
- description: GCC MSS MNOC_AXI clock
|
||||
- description: RPMH QDSS clock
|
||||
- description: RPMH XO clock
|
||||
clock-names:
|
||||
items:
|
||||
- const: iface
|
||||
- const: bus
|
||||
- const: mem
|
||||
- const: gpll0_mss
|
||||
- const: snoc_axi
|
||||
- const: mnoc_axi
|
||||
- const: qdss
|
||||
- const: xo
|
||||
required:
|
||||
- glink-edge
|
||||
|
||||
- if:
|
||||
properties:
|
||||
compatible:
|
||||
const: qcom,sdm845-mss-pil
|
||||
then:
|
||||
properties:
|
||||
power-domains:
|
||||
minItems: 3
|
||||
power-domain-names:
|
||||
minItems: 3
|
||||
resets:
|
||||
minItems: 2
|
||||
reset-names:
|
||||
minItems: 2
|
||||
clocks:
|
||||
items:
|
||||
- description: GCC MSS IFACE clock
|
||||
- description: GCC MSS BUS clock
|
||||
- description: GCC MSS MEM clock
|
||||
- description: GCC MSS GPLL0 clock
|
||||
- description: GCC MSS SNOC_AXI clock
|
||||
- description: GCC MSS MNOC_AXI clock
|
||||
- description: GCC MSS PRNG clock
|
||||
- description: RPMH XO clock
|
||||
clock-names:
|
||||
items:
|
||||
- const: iface
|
||||
- const: bus
|
||||
- const: mem
|
||||
- const: gpll0_mss
|
||||
- const: snoc_axi
|
||||
- const: mnoc_axi
|
||||
- const: prng
|
||||
- const: xo
|
||||
required:
|
||||
- qcom,qmp
|
||||
- glink-edge
|
||||
else:
|
||||
properties:
|
||||
iommus: false
|
||||
power-domains:
|
||||
maxItems: 2
|
||||
power-domain-names:
|
||||
maxItems: 2
|
||||
resets:
|
||||
maxItems: 1
|
||||
reset-names:
|
||||
maxItems: 1
|
||||
qcom,qmp: false
|
||||
|
||||
# Fallbacks for deprecated properties
|
||||
- oneOf:
|
||||
- required:
|
||||
- memory-region
|
||||
- required:
|
||||
- mba
|
||||
- mpss
|
||||
|
||||
additionalProperties: false
|
||||
|
||||
examples:
|
||||
- |
|
||||
#include <dt-bindings/clock/qcom,gcc-sdm845.h>
|
||||
#include <dt-bindings/clock/qcom,rpmh.h>
|
||||
#include <dt-bindings/interrupt-controller/arm-gic.h>
|
||||
#include <dt-bindings/power/qcom-rpmpd.h>
|
||||
#include <dt-bindings/reset/qcom,sdm845-aoss.h>
|
||||
#include <dt-bindings/reset/qcom,sdm845-pdc.h>
|
||||
|
||||
remoteproc@4080000 {
|
||||
compatible = "qcom,sdm845-mss-pil";
|
||||
reg = <0x04080000 0x408>, <0x04180000 0x48>;
|
||||
reg-names = "qdsp6", "rmb";
|
||||
|
||||
interrupts-extended = <&intc GIC_SPI 266 IRQ_TYPE_EDGE_RISING>,
|
||||
<&modem_smp2p_in 0 IRQ_TYPE_EDGE_RISING>,
|
||||
<&modem_smp2p_in 1 IRQ_TYPE_EDGE_RISING>,
|
||||
<&modem_smp2p_in 2 IRQ_TYPE_EDGE_RISING>,
|
||||
<&modem_smp2p_in 3 IRQ_TYPE_EDGE_RISING>,
|
||||
<&modem_smp2p_in 7 IRQ_TYPE_EDGE_RISING>;
|
||||
interrupt-names = "wdog", "fatal", "ready", "handover", "stop-ack",
|
||||
"shutdown-ack";
|
||||
|
||||
clocks = <&gcc GCC_MSS_CFG_AHB_CLK>,
|
||||
<&gcc GCC_MSS_Q6_MEMNOC_AXI_CLK>,
|
||||
<&gcc GCC_BOOT_ROM_AHB_CLK>,
|
||||
<&gcc GCC_MSS_GPLL0_DIV_CLK_SRC>,
|
||||
<&gcc GCC_MSS_SNOC_AXI_CLK>,
|
||||
<&gcc GCC_MSS_MFAB_AXIS_CLK>,
|
||||
<&gcc GCC_PRNG_AHB_CLK>,
|
||||
<&rpmhcc RPMH_CXO_CLK>;
|
||||
clock-names = "iface", "bus", "mem", "gpll0_mss",
|
||||
"snoc_axi", "mnoc_axi", "prng", "xo";
|
||||
|
||||
power-domains = <&rpmhpd SDM845_CX>,
|
||||
<&rpmhpd SDM845_MX>,
|
||||
<&rpmhpd SDM845_MSS>;
|
||||
power-domain-names = "cx", "mx", "mss";
|
||||
|
||||
memory-region = <&mba_mem>, <&mpss_mem>;
|
||||
|
||||
resets = <&aoss_reset AOSS_CC_MSS_RESTART>,
|
||||
<&pdc_reset PDC_MODEM_SYNC_RESET>;
|
||||
reset-names = "mss_restart", "pdc_reset";
|
||||
|
||||
qcom,halt-regs = <&tcsr_regs_1 0x3000 0x5000 0x4000>;
|
||||
|
||||
qcom,qmp = <&aoss_qmp>;
|
||||
|
||||
qcom,smem-states = <&modem_smp2p_out 0>;
|
||||
qcom,smem-state-names = "stop";
|
||||
|
||||
glink-edge {
|
||||
interrupts = <GIC_SPI 449 IRQ_TYPE_EDGE_RISING>;
|
||||
label = "modem";
|
||||
qcom,remote-pid = <1>;
|
||||
mboxes = <&apss_shared 12>;
|
||||
};
|
||||
};
|
@ -9,9 +9,6 @@ on the Qualcomm Hexagon core.
|
||||
Definition: must be one of:
|
||||
"qcom,ipq8074-wcss-pil"
|
||||
"qcom,qcs404-wcss-pil"
|
||||
"qcom,msm8996-mss-pil"
|
||||
"qcom,msm8998-mss-pil"
|
||||
"qcom,sdm845-mss-pil"
|
||||
|
||||
- reg:
|
||||
Usage: required
|
||||
@ -32,23 +29,7 @@ on the Qualcomm Hexagon core.
|
||||
- interrupt-names:
|
||||
Usage: required
|
||||
Value type: <stringlist>
|
||||
Definition: The interrupts needed depends on the compatible
|
||||
string:
|
||||
qcom,ipq8074-wcss-pil:
|
||||
qcom,qcs404-wcss-pil:
|
||||
must be "wdog", "fatal", "ready", "handover", "stop-ack"
|
||||
qcom,msm8996-mss-pil:
|
||||
qcom,msm8998-mss-pil:
|
||||
qcom,sdm845-mss-pil:
|
||||
must be "wdog", "fatal", "ready", "handover", "stop-ack",
|
||||
"shutdown-ack"
|
||||
|
||||
- firmware-name:
|
||||
Usage: optional
|
||||
Value type: <stringlist>
|
||||
Definition: must list the relative firmware image paths for mba and
|
||||
modem. They are used for booting and authenticating the
|
||||
Hexagon core.
|
||||
Definition: must be "wdog", "fatal", "ready", "handover", "stop-ack"
|
||||
|
||||
- clocks:
|
||||
Usage: required
|
||||
@ -66,41 +47,23 @@ on the Qualcomm Hexagon core.
|
||||
"gcc_axim_cbcr", "lcc_ahbfabric_cbc", "tcsr_lcc_cbc",
|
||||
"lcc_abhs_cbc", "lcc_tcm_slave_cbc", "lcc_abhm_cbc",
|
||||
"lcc_axim_cbc", "lcc_bcr_sleep"
|
||||
qcom,msm8996-mss-pil:
|
||||
must be "iface", "bus", "mem", "xo", "gpll0_mss",
|
||||
"snoc_axi", "mnoc_axi", "pnoc", "qdss"
|
||||
qcom,msm8998-mss-pil:
|
||||
must be "iface", "bus", "mem", "xo", "gpll0_mss",
|
||||
"snoc_axi", "mnoc_axi", "qdss"
|
||||
qcom,sdm845-mss-pil:
|
||||
must be "iface", "bus", "mem", "xo", "gpll0_mss",
|
||||
"snoc_axi", "mnoc_axi", "prng"
|
||||
|
||||
- resets:
|
||||
Usage: required
|
||||
Value type: <phandle>
|
||||
Definition: reference to the reset-controller for the modem sub-system
|
||||
reference to the list of 3 reset-controllers for the
|
||||
Definition: reference to the list of 3 reset-controllers for the
|
||||
wcss sub-system
|
||||
reference to the list of 2 reset-controllers for the modem
|
||||
sub-system on SDM845 SoCs
|
||||
|
||||
- reset-names:
|
||||
Usage: required
|
||||
Value type: <stringlist>
|
||||
Definition: must be "mss_restart" for the modem sub-system
|
||||
must be "wcss_aon_reset", "wcss_reset", "wcss_q6_reset"
|
||||
Definition: must be "wcss_aon_reset", "wcss_reset", "wcss_q6_reset"
|
||||
for the wcss sub-system
|
||||
must be "mss_restart", "pdc_reset" for the modem
|
||||
sub-system on SDM845 SoCs
|
||||
|
||||
For devices where the mba and mpss sub-nodes are not specified, mba/mpss region
|
||||
should be referenced as follows:
|
||||
- memory-region:
|
||||
Usage: required
|
||||
Value type: <phandle>
|
||||
Definition: reference to the reserved-memory for the mba region followed
|
||||
by the mpss region
|
||||
Definition: reference to wcss reserved-memory region.
|
||||
|
||||
For the compatible string below the following supplies are required:
|
||||
"qcom,qcs404-wcss-pil"
|
||||
@ -110,36 +73,6 @@ For the compatible string below the following supplies are required:
|
||||
Definition: reference to the regulators to be held on behalf of the
|
||||
booting of the Hexagon core
|
||||
|
||||
For the compatible string below the following supplies are required:
|
||||
"qcom,msm8996-mss-pil"
|
||||
- pll-supply:
|
||||
Usage: required
|
||||
Value type: <phandle>
|
||||
Definition: reference to the regulators to be held on behalf of the
|
||||
booting of the Hexagon core
|
||||
|
||||
- power-domains:
|
||||
Usage: required
|
||||
Value type: <phandle>
|
||||
Definition: reference to power-domains that match power-domain-names
|
||||
|
||||
- power-domain-names:
|
||||
Usage: required
|
||||
Value type: <stringlist>
|
||||
Definition: The power-domains needed depend on the compatible string:
|
||||
qcom,ipq8074-wcss-pil:
|
||||
no power-domain names required
|
||||
qcom,msm8996-mss-pil:
|
||||
qcom,msm8998-mss-pil:
|
||||
must be "cx", "mx"
|
||||
qcom,sdm845-mss-pil:
|
||||
must be "cx", "mx", "mss"
|
||||
|
||||
- qcom,qmp:
|
||||
Usage: optional
|
||||
Value type: <phandle>
|
||||
Definition: reference to the AOSS side-channel message RAM.
|
||||
|
||||
- qcom,smem-states:
|
||||
Usage: required
|
||||
Value type: <phandle>
|
||||
@ -155,16 +88,9 @@ For the compatible string below the following supplies are required:
|
||||
Usage: required
|
||||
Value type: <prop-encoded-array>
|
||||
Definition: a phandle reference to a syscon representing TCSR followed
|
||||
by the three offsets within syscon for q6, modem and nc
|
||||
by the three offsets within syscon for q6, wcss and nc
|
||||
halt registers.
|
||||
|
||||
The Hexagon node must contain iommus property as described in ../iommu/iommu.txt
|
||||
on platforms which do not have TrustZone.
|
||||
|
||||
= SUBNODES:
|
||||
The Hexagon node must contain two subnodes, named "mba" and "mpss" representing
|
||||
the memory regions used by the Hexagon firmware. Each sub-node must contain:
|
||||
|
||||
- memory-region:
|
||||
Usage: required
|
||||
Value type: <phandle>
|
||||
@ -174,56 +100,3 @@ The Hexagon node may also have an subnode named either "smd-edge" or
|
||||
"glink-edge" that describes the communication edge, channels and devices
|
||||
related to the Hexagon. See ../soc/qcom/qcom,smd.yaml and
|
||||
../soc/qcom/qcom,glink.txt for details on how to describe these.
|
||||
|
||||
= EXAMPLE
|
||||
The following example describes the resources needed to boot control the
|
||||
Hexagon, as it is found on MSM8974 boards.
|
||||
|
||||
remoteproc@fc880000 {
|
||||
compatible = "qcom,msm8974-mss-pil";
|
||||
reg = <0xfc880000 0x100>, <0xfc820000 0x020>;
|
||||
reg-names = "qdsp6", "rmb";
|
||||
|
||||
interrupts-extended = <&intc GIC_SPI 24 IRQ_TYPE_EDGE_RISING>,
|
||||
<&modem_smp2p_in 0 IRQ_TYPE_EDGE_RISING>,
|
||||
<&modem_smp2p_in 1 IRQ_TYPE_EDGE_RISING>,
|
||||
<&modem_smp2p_in 2 IRQ_TYPE_EDGE_RISING>,
|
||||
<&modem_smp2p_in 3 IRQ_TYPE_EDGE_RISING>;
|
||||
interrupt-names = "wdog", "fatal", "ready", "handover", "stop-ack";
|
||||
|
||||
clocks = <&gcc GCC_MSS_Q6_BIMC_AXI_CLK>,
|
||||
<&gcc GCC_MSS_CFG_AHB_CLK>,
|
||||
<&gcc GCC_BOOT_ROM_AHB_CLK>,
|
||||
<&xo_board>;
|
||||
clock-names = "iface", "bus", "mem", "xo";
|
||||
|
||||
resets = <&gcc GCC_MSS_RESTART>;
|
||||
reset-names = "mss_restart";
|
||||
|
||||
cx-supply = <&pm8841_s2>;
|
||||
mss-supply = <&pm8841_s3>;
|
||||
mx-supply = <&pm8841_s1>;
|
||||
pll-supply = <&pm8941_l12>;
|
||||
|
||||
qcom,halt-regs = <&tcsr_mutex_block 0x1180 0x1200 0x1280>;
|
||||
|
||||
qcom,smem-states = <&modem_smp2p_out 0>;
|
||||
qcom,smem-state-names = "stop";
|
||||
|
||||
mba {
|
||||
memory-region = <&mba_region>;
|
||||
};
|
||||
|
||||
mpss {
|
||||
memory-region = <&mpss_region>;
|
||||
};
|
||||
|
||||
smd-edge {
|
||||
interrupts = <GIC_SPI 25 IRQ_TYPE_EDGE_RISING>;
|
||||
|
||||
qcom,ipc = <&apcs 8 12>;
|
||||
qcom,smd-edge = <0>;
|
||||
|
||||
label = "modem";
|
||||
};
|
||||
};
|
||||
|
Loading…
x
Reference in New Issue
Block a user