iv/linux
1
0
Fork 0
Code Issues Pull Requests Actions Packages Projects Releases Wiki Activity

rtc: rzn1: Add oscillator offset support

Browse Source 
The RZN1 RTC can compensate the imprecision of the oscillator up to
approximately 190ppm.

Seconds can last slightly shorter or longer depending on the
configuration.

Below ~65ppm of correction, we can change the time spent in a second
every minute, which is the most accurate compensation that the RTC can
offer. Above, the compensation will be active every 20s.

Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
Link: https://lore.kernel.org/r/20220516082504.33913-5-miquel.raynal@bootlin.com
This commit is contained in:
Miquel Raynal 2022-05-16 10:25:03 +02:00 committed by Alexandre Belloni
parent b5ad1bf00d
commit be4a11cf98
1 changed files with 73 additions and 0 deletions
Show Stats Download Patch File Download Diff File Expand all files Collapse all files

73
drivers/rtc/rtc-rzn1.c
View File

@ -245,12 +245,85 @@ static int rzn1_rtc_set_alarm(struct device *dev, struct rtc_wkalrm *alrm)
return 0;
}
static int rzn1_rtc_read_offset(struct device *dev, long *offset)
{
struct rzn1_rtc *rtc = dev_get_drvdata(dev);
unsigned int ppb_per_step;
bool subtract;
u32 val;
val = readl(rtc->base + RZN1_RTC_SUBU);
ppb_per_step = val & RZN1_RTC_SUBU_DEV ? 1017 : 3051;
subtract = val & RZN1_RTC_SUBU_DECR;
val &= 0x3F;
if (!val)
*offset = 0;
else if (subtract)
*offset = -(((~val) & 0x3F) + 1) * ppb_per_step;
else
*offset = (val - 1) * ppb_per_step;
return 0;
}
static int rzn1_rtc_set_offset(struct device *dev, long offset)
{
struct rzn1_rtc *rtc = dev_get_drvdata(dev);
unsigned int steps;
int stepsh, stepsl;
u32 val;
int ret;
/*
* Check which resolution mode (every 20 or 60s) can be used.
* Between 2 and 124 clock pulses can be added or substracted.
*
* In 20s mode, the minimum resolution is 2 / (32768 * 20) which is
* close to 3051 ppb. In 60s mode, the resolution is closer to 1017.
*/
stepsh = DIV_ROUND_CLOSEST(offset, 1017);
stepsl = DIV_ROUND_CLOSEST(offset, 3051);
if (stepsh >= -0x3E && stepsh <= 0x3E) {
/* 1017 ppb per step */
steps = stepsh;
val |= RZN1_RTC_SUBU_DEV;
} else if (stepsl >= -0x3E && stepsl <= 0x3E) {
/* 3051 ppb per step */
steps = stepsl;
} else {
return -ERANGE;
}
if (!steps)
return 0;
if (steps > 0) {
val |= steps + 1;
} else {
val |= RZN1_RTC_SUBU_DECR;
val |= (~(-steps - 1)) & 0x3F;
}
ret = readl_poll_timeout(rtc->base + RZN1_RTC_CTL2, val,
!(val & RZN1_RTC_CTL2_WUST), 100, 2000000);
if (ret)
return ret;
writel(val, rtc->base + RZN1_RTC_SUBU);
return 0;
}
static const struct rtc_class_ops rzn1_rtc_ops = {
.read_time = rzn1_rtc_read_time,
.set_time = rzn1_rtc_set_time,
.read_alarm = rzn1_rtc_read_alarm,
.set_alarm = rzn1_rtc_set_alarm,
.alarm_irq_enable = rzn1_rtc_alarm_irq_enable,
.read_offset = rzn1_rtc_read_offset,
.set_offset = rzn1_rtc_set_offset,
};
static int rzn1_rtc_probe(struct platform_device *pdev)