SCSI fixes on 20230714

This is a bunch of small driver fixes and a larger rework of zone disk
 handling (which reaches into blk and nvme).  The aacraid array-bounds
 fix is now critical since the security people turned on -Werror for
 some build tests, which now fail without it.
 
 Signed-off-by: James E.J. Bottomley <jejb@linux.ibm.com>
 -----BEGIN PGP SIGNATURE-----
 
 iJwEABMIAEQWIQTnYEDbdso9F2cI+arnQslM7pishQUCZLGSiCYcamFtZXMuYm90
 dG9tbGV5QGhhbnNlbnBhcnRuZXJzaGlwLmNvbQAKCRDnQslM7pishd/BAPwO2i4t
 5uzhcWihoYaIZ6x07oEhgOP/o1h5n5mM908AyAEA6s2hQKDoIxjJexqvkS7lPjni
 P8VMcfvOmdsLDCD3nJ4=
 =+10g
 -----END PGP SIGNATURE-----

Merge tag 'scsi-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi

Pull SCSI fixes from James Bottomley:
 "This is a bunch of small driver fixes and a larger rework of zone disk
  handling (which reaches into blk and nvme).

  The aacraid array-bounds fix is now critical since the security people
  turned on -Werror for some build tests, which now fail without it"

* tag 'scsi-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi:
  scsi: storvsc: Handle SRB status value 0x30
  scsi: block: Improve checks in blk_revalidate_disk_zones()
  scsi: block: virtio_blk: Set zone limits before revalidating zones
  scsi: block: nullblk: Set zone limits before revalidating zones
  scsi: nvme: zns: Set zone limits before revalidating zones
  scsi: sd_zbc: Set zone limits before revalidating zones
  scsi: ufs: core: Add support for qTimestamp attribute
  scsi: aacraid: Avoid -Warray-bounds warning
  scsi: ufs: ufs-mediatek: Add dependency for RESET_CONTROLLER
  scsi: ufs: core: Update contact email for monitor sysfs nodes
  scsi: scsi_debug: Remove dead code
  scsi: qla2xxx: Use vmalloc_array() and vcalloc()
  scsi: fnic: Use vmalloc_array() and vcalloc()
  scsi: qla2xxx: Fix error code in qla2x00_start_sp()
  scsi: qla2xxx: Silence a static checker warning
  scsi: lpfc: Fix a possible data race in lpfc_unregister_fcf_rescan()
This commit is contained in:
Linus Torvalds 2023-07-14 19:57:29 -07:00
commit be522ac7cd
18 changed files with 193 additions and 131 deletions

View File

@ -994,7 +994,7 @@ Description: This file shows the amount of physical memory needed
What: /sys/bus/platform/drivers/ufshcd/*/rpm_lvl
What: /sys/bus/platform/devices/*.ufs/rpm_lvl
Date: September 2014
Contact: Subhash Jadavani <subhashj@codeaurora.org>
Contact: Can Guo <quic_cang@quicinc.com>
Description: This entry could be used to set or show the UFS device
runtime power management level. The current driver
implementation supports 7 levels with next target states:
@ -1021,7 +1021,7 @@ Description: This entry could be used to set or show the UFS device
What: /sys/bus/platform/drivers/ufshcd/*/rpm_target_dev_state
What: /sys/bus/platform/devices/*.ufs/rpm_target_dev_state
Date: February 2018
Contact: Subhash Jadavani <subhashj@codeaurora.org>
Contact: Can Guo <quic_cang@quicinc.com>
Description: This entry shows the target power mode of an UFS device
for the chosen runtime power management level.
@ -1030,7 +1030,7 @@ Description: This entry shows the target power mode of an UFS device
What: /sys/bus/platform/drivers/ufshcd/*/rpm_target_link_state
What: /sys/bus/platform/devices/*.ufs/rpm_target_link_state
Date: February 2018
Contact: Subhash Jadavani <subhashj@codeaurora.org>
Contact: Can Guo <quic_cang@quicinc.com>
Description: This entry shows the target state of an UFS UIC link
for the chosen runtime power management level.
@ -1039,7 +1039,7 @@ Description: This entry shows the target state of an UFS UIC link
What: /sys/bus/platform/drivers/ufshcd/*/spm_lvl
What: /sys/bus/platform/devices/*.ufs/spm_lvl
Date: September 2014
Contact: Subhash Jadavani <subhashj@codeaurora.org>
Contact: Can Guo <quic_cang@quicinc.com>
Description: This entry could be used to set or show the UFS device
system power management level. The current driver
implementation supports 7 levels with next target states:
@ -1066,7 +1066,7 @@ Description: This entry could be used to set or show the UFS device
What: /sys/bus/platform/drivers/ufshcd/*/spm_target_dev_state
What: /sys/bus/platform/devices/*.ufs/spm_target_dev_state
Date: February 2018
Contact: Subhash Jadavani <subhashj@codeaurora.org>
Contact: Can Guo <quic_cang@quicinc.com>
Description: This entry shows the target power mode of an UFS device
for the chosen system power management level.
@ -1075,7 +1075,7 @@ Description: This entry shows the target power mode of an UFS device
What: /sys/bus/platform/drivers/ufshcd/*/spm_target_link_state
What: /sys/bus/platform/devices/*.ufs/spm_target_link_state
Date: February 2018
Contact: Subhash Jadavani <subhashj@codeaurora.org>
Contact: Can Guo <quic_cang@quicinc.com>
Description: This entry shows the target state of an UFS UIC link
for the chosen system power management level.
@ -1084,7 +1084,7 @@ Description: This entry shows the target state of an UFS UIC link
What: /sys/bus/platform/drivers/ufshcd/*/monitor/monitor_enable
What: /sys/bus/platform/devices/*.ufs/monitor/monitor_enable
Date: January 2021
Contact: Can Guo <cang@codeaurora.org>
Contact: Can Guo <quic_cang@quicinc.com>
Description: This file shows the status of performance monitor enablement
and it can be used to start/stop the monitor. When the monitor
is stopped, the performance data collected is also cleared.
@ -1092,7 +1092,7 @@ Description: This file shows the status of performance monitor enablement
What: /sys/bus/platform/drivers/ufshcd/*/monitor/monitor_chunk_size
What: /sys/bus/platform/devices/*.ufs/monitor/monitor_chunk_size
Date: January 2021
Contact: Can Guo <cang@codeaurora.org>
Contact: Can Guo <quic_cang@quicinc.com>
Description: This file tells the monitor to focus on requests transferring
data of specific chunk size (in Bytes). 0 means any chunk size.
It can only be changed when monitor is disabled.
@ -1100,7 +1100,7 @@ Description: This file tells the monitor to focus on requests transferring
What: /sys/bus/platform/drivers/ufshcd/*/monitor/read_total_sectors
What: /sys/bus/platform/devices/*.ufs/monitor/read_total_sectors
Date: January 2021
Contact: Can Guo <cang@codeaurora.org>
Contact: Can Guo <quic_cang@quicinc.com>
Description: This file shows how many sectors (in 512 Bytes) have been
sent from device to host after monitor gets started.
@ -1109,7 +1109,7 @@ Description: This file shows how many sectors (in 512 Bytes) have been
What: /sys/bus/platform/drivers/ufshcd/*/monitor/read_total_busy
What: /sys/bus/platform/devices/*.ufs/monitor/read_total_busy
Date: January 2021
Contact: Can Guo <cang@codeaurora.org>
Contact: Can Guo <quic_cang@quicinc.com>
Description: This file shows how long (in micro seconds) has been spent
sending data from device to host after monitor gets started.
@ -1118,7 +1118,7 @@ Description: This file shows how long (in micro seconds) has been spent
What: /sys/bus/platform/drivers/ufshcd/*/monitor/read_nr_requests
What: /sys/bus/platform/devices/*.ufs/monitor/read_nr_requests
Date: January 2021
Contact: Can Guo <cang@codeaurora.org>
Contact: Can Guo <quic_cang@quicinc.com>
Description: This file shows how many read requests have been sent after
monitor gets started.
@ -1127,7 +1127,7 @@ Description: This file shows how many read requests have been sent after
What: /sys/bus/platform/drivers/ufshcd/*/monitor/read_req_latency_max
What: /sys/bus/platform/devices/*.ufs/monitor/read_req_latency_max
Date: January 2021
Contact: Can Guo <cang@codeaurora.org>
Contact: Can Guo <quic_cang@quicinc.com>
Description: This file shows the maximum latency (in micro seconds) of
read requests after monitor gets started.
@ -1136,7 +1136,7 @@ Description: This file shows the maximum latency (in micro seconds) of
What: /sys/bus/platform/drivers/ufshcd/*/monitor/read_req_latency_min
What: /sys/bus/platform/devices/*.ufs/monitor/read_req_latency_min
Date: January 2021
Contact: Can Guo <cang@codeaurora.org>
Contact: Can Guo <quic_cang@quicinc.com>
Description: This file shows the minimum latency (in micro seconds) of
read requests after monitor gets started.
@ -1145,7 +1145,7 @@ Description: This file shows the minimum latency (in micro seconds) of
What: /sys/bus/platform/drivers/ufshcd/*/monitor/read_req_latency_avg
What: /sys/bus/platform/devices/*.ufs/monitor/read_req_latency_avg
Date: January 2021
Contact: Can Guo <cang@codeaurora.org>
Contact: Can Guo <quic_cang@quicinc.com>
Description: This file shows the average latency (in micro seconds) of
read requests after monitor gets started.
@ -1154,7 +1154,7 @@ Description: This file shows the average latency (in micro seconds) of
What: /sys/bus/platform/drivers/ufshcd/*/monitor/read_req_latency_sum
What: /sys/bus/platform/devices/*.ufs/monitor/read_req_latency_sum
Date: January 2021
Contact: Can Guo <cang@codeaurora.org>
Contact: Can Guo <quic_cang@quicinc.com>
Description: This file shows the total latency (in micro seconds) of
read requests sent after monitor gets started.
@ -1163,7 +1163,7 @@ Description: This file shows the total latency (in micro seconds) of
What: /sys/bus/platform/drivers/ufshcd/*/monitor/write_total_sectors
What: /sys/bus/platform/devices/*.ufs/monitor/write_total_sectors
Date: January 2021
Contact: Can Guo <cang@codeaurora.org>
Contact: Can Guo <quic_cang@quicinc.com>
Description: This file shows how many sectors (in 512 Bytes) have been sent
from host to device after monitor gets started.
@ -1172,7 +1172,7 @@ Description: This file shows how many sectors (in 512 Bytes) have been sent
What: /sys/bus/platform/drivers/ufshcd/*/monitor/write_total_busy
What: /sys/bus/platform/devices/*.ufs/monitor/write_total_busy
Date: January 2021
Contact: Can Guo <cang@codeaurora.org>
Contact: Can Guo <quic_cang@quicinc.com>
Description: This file shows how long (in micro seconds) has been spent
sending data from host to device after monitor gets started.
@ -1181,7 +1181,7 @@ Description: This file shows how long (in micro seconds) has been spent
What: /sys/bus/platform/drivers/ufshcd/*/monitor/write_nr_requests
What: /sys/bus/platform/devices/*.ufs/monitor/write_nr_requests
Date: January 2021
Contact: Can Guo <cang@codeaurora.org>
Contact: Can Guo <quic_cang@quicinc.com>
Description: This file shows how many write requests have been sent after
monitor gets started.
@ -1190,7 +1190,7 @@ Description: This file shows how many write requests have been sent after
What: /sys/bus/platform/drivers/ufshcd/*/monitor/write_req_latency_max
What: /sys/bus/platform/devices/*.ufs/monitor/write_req_latency_max
Date: January 2021
Contact: Can Guo <cang@codeaurora.org>
Contact: Can Guo <quic_cang@quicinc.com>
Description: This file shows the maximum latency (in micro seconds) of write
requests after monitor gets started.
@ -1199,7 +1199,7 @@ Description: This file shows the maximum latency (in micro seconds) of write
What: /sys/bus/platform/drivers/ufshcd/*/monitor/write_req_latency_min
What: /sys/bus/platform/devices/*.ufs/monitor/write_req_latency_min
Date: January 2021
Contact: Can Guo <cang@codeaurora.org>
Contact: Can Guo <quic_cang@quicinc.com>
Description: This file shows the minimum latency (in micro seconds) of write
requests after monitor gets started.
@ -1208,7 +1208,7 @@ Description: This file shows the minimum latency (in micro seconds) of write
What: /sys/bus/platform/drivers/ufshcd/*/monitor/write_req_latency_avg
What: /sys/bus/platform/devices/*.ufs/monitor/write_req_latency_avg
Date: January 2021
Contact: Can Guo <cang@codeaurora.org>
Contact: Can Guo <quic_cang@quicinc.com>
Description: This file shows the average latency (in micro seconds) of write
requests after monitor gets started.
@ -1217,7 +1217,7 @@ Description: This file shows the average latency (in micro seconds) of write
What: /sys/bus/platform/drivers/ufshcd/*/monitor/write_req_latency_sum
What: /sys/bus/platform/devices/*.ufs/monitor/write_req_latency_sum
Date: January 2021
Contact: Can Guo <cang@codeaurora.org>
Contact: Can Guo <quic_cang@quicinc.com>
Description: This file shows the total latency (in micro seconds) of write
requests after monitor gets started.
@ -1226,7 +1226,7 @@ Description: This file shows the total latency (in micro seconds) of write
What: /sys/bus/platform/drivers/ufshcd/*/device_descriptor/wb_presv_us_en
What: /sys/bus/platform/devices/*.ufs/device_descriptor/wb_presv_us_en
Date: June 2020
Contact: Asutosh Das <asutoshd@codeaurora.org>
Contact: Asutosh Das <quic_asutoshd@quicinc.com>
Description: This entry shows if preserve user-space was configured
The file is read only.
@ -1234,7 +1234,7 @@ Description: This entry shows if preserve user-space was configured
What: /sys/bus/platform/drivers/ufshcd/*/device_descriptor/wb_shared_alloc_units
What: /sys/bus/platform/devices/*.ufs/device_descriptor/wb_shared_alloc_units
Date: June 2020
Contact: Asutosh Das <asutoshd@codeaurora.org>
Contact: Asutosh Das <quic_asutoshd@quicinc.com>
Description: This entry shows the shared allocated units of WB buffer
The file is read only.
@ -1242,7 +1242,7 @@ Description: This entry shows the shared allocated units of WB buffer
What: /sys/bus/platform/drivers/ufshcd/*/device_descriptor/wb_type
What: /sys/bus/platform/devices/*.ufs/device_descriptor/wb_type
Date: June 2020
Contact: Asutosh Das <asutoshd@codeaurora.org>
Contact: Asutosh Das <quic_asutoshd@quicinc.com>
Description: This entry shows the configured WB type.
0x1 for shared buffer mode. 0x0 for dedicated buffer mode.
@ -1251,7 +1251,7 @@ Description: This entry shows the configured WB type.
What: /sys/bus/platform/drivers/ufshcd/*/geometry_descriptor/wb_buff_cap_adj
What: /sys/bus/platform/devices/*.ufs/geometry_descriptor/wb_buff_cap_adj
Date: June 2020
Contact: Asutosh Das <asutoshd@codeaurora.org>
Contact: Asutosh Das <quic_asutoshd@quicinc.com>
Description: This entry shows the total user-space decrease in shared
buffer mode.
The value of this parameter is 3 for TLC NAND when SLC mode
@ -1262,7 +1262,7 @@ Description: This entry shows the total user-space decrease in shared
What: /sys/bus/platform/drivers/ufshcd/*/geometry_descriptor/wb_max_alloc_units
What: /sys/bus/platform/devices/*.ufs/geometry_descriptor/wb_max_alloc_units
Date: June 2020
Contact: Asutosh Das <asutoshd@codeaurora.org>
Contact: Asutosh Das <quic_asutoshd@quicinc.com>
Description: This entry shows the Maximum total WriteBooster Buffer size
which is supported by the entire device.
@ -1271,7 +1271,7 @@ Description: This entry shows the Maximum total WriteBooster Buffer size
What: /sys/bus/platform/drivers/ufshcd/*/geometry_descriptor/wb_max_wb_luns
What: /sys/bus/platform/devices/*.ufs/geometry_descriptor/wb_max_wb_luns
Date: June 2020
Contact: Asutosh Das <asutoshd@codeaurora.org>
Contact: Asutosh Das <quic_asutoshd@quicinc.com>
Description: This entry shows the maximum number of luns that can support
WriteBooster.
@ -1280,7 +1280,7 @@ Description: This entry shows the maximum number of luns that can support
What: /sys/bus/platform/drivers/ufshcd/*/geometry_descriptor/wb_sup_red_type
What: /sys/bus/platform/devices/*.ufs/geometry_descriptor/wb_sup_red_type
Date: June 2020
Contact: Asutosh Das <asutoshd@codeaurora.org>
Contact: Asutosh Das <quic_asutoshd@quicinc.com>
Description: The supportability of user space reduction mode
and preserve user space mode.
00h: WriteBooster Buffer can be configured only in
@ -1295,7 +1295,7 @@ Description: The supportability of user space reduction mode
What: /sys/bus/platform/drivers/ufshcd/*/geometry_descriptor/wb_sup_wb_type
What: /sys/bus/platform/devices/*.ufs/geometry_descriptor/wb_sup_wb_type
Date: June 2020
Contact: Asutosh Das <asutoshd@codeaurora.org>
Contact: Asutosh Das <quic_asutoshd@quicinc.com>
Description: The supportability of WriteBooster Buffer type.
=== ==========================================================
@ -1310,7 +1310,7 @@ Description: The supportability of WriteBooster Buffer type.
What: /sys/bus/platform/drivers/ufshcd/*/flags/wb_enable
What: /sys/bus/platform/devices/*.ufs/flags/wb_enable
Date: June 2020
Contact: Asutosh Das <asutoshd@codeaurora.org>
Contact: Asutosh Das <quic_asutoshd@quicinc.com>
Description: This entry shows the status of WriteBooster.
== ============================
@ -1323,7 +1323,7 @@ Description: This entry shows the status of WriteBooster.
What: /sys/bus/platform/drivers/ufshcd/*/flags/wb_flush_en
What: /sys/bus/platform/devices/*.ufs/flags/wb_flush_en
Date: June 2020
Contact: Asutosh Das <asutoshd@codeaurora.org>
Contact: Asutosh Das <quic_asutoshd@quicinc.com>
Description: This entry shows if flush is enabled.
== =================================
@ -1336,7 +1336,7 @@ Description: This entry shows if flush is enabled.
What: /sys/bus/platform/drivers/ufshcd/*/flags/wb_flush_during_h8
What: /sys/bus/platform/devices/*.ufs/flags/wb_flush_during_h8
Date: June 2020
Contact: Asutosh Das <asutoshd@codeaurora.org>
Contact: Asutosh Das <quic_asutoshd@quicinc.com>
Description: Flush WriteBooster Buffer during hibernate state.
== =================================================
@ -1351,7 +1351,7 @@ Description: Flush WriteBooster Buffer during hibernate state.
What: /sys/bus/platform/drivers/ufshcd/*/attributes/wb_avail_buf
What: /sys/bus/platform/devices/*.ufs/attributes/wb_avail_buf
Date: June 2020
Contact: Asutosh Das <asutoshd@codeaurora.org>
Contact: Asutosh Das <quic_asutoshd@quicinc.com>
Description: This entry shows the amount of unused WriteBooster buffer
available.
@ -1360,7 +1360,7 @@ Description: This entry shows the amount of unused WriteBooster buffer
What: /sys/bus/platform/drivers/ufshcd/*/attributes/wb_cur_buf
What: /sys/bus/platform/devices/*.ufs/attributes/wb_cur_buf
Date: June 2020
Contact: Asutosh Das <asutoshd@codeaurora.org>
Contact: Asutosh Das <quic_asutoshd@quicinc.com>
Description: This entry shows the amount of unused current buffer.
The file is read only.
@ -1368,7 +1368,7 @@ Description: This entry shows the amount of unused current buffer.
What: /sys/bus/platform/drivers/ufshcd/*/attributes/wb_flush_status
What: /sys/bus/platform/devices/*.ufs/attributes/wb_flush_status
Date: June 2020
Contact: Asutosh Das <asutoshd@codeaurora.org>
Contact: Asutosh Das <quic_asutoshd@quicinc.com>
Description: This entry shows the flush operation status.
@ -1385,7 +1385,7 @@ Description: This entry shows the flush operation status.
What: /sys/bus/platform/drivers/ufshcd/*/attributes/wb_life_time_est
What: /sys/bus/platform/devices/*.ufs/attributes/wb_life_time_est
Date: June 2020
Contact: Asutosh Das <asutoshd@codeaurora.org>
Contact: Asutosh Das <quic_asutoshd@quicinc.com>
Description: This entry shows an indication of the WriteBooster Buffer
lifetime based on the amount of performed program/erase cycles
@ -1399,7 +1399,7 @@ Description: This entry shows an indication of the WriteBooster Buffer
What: /sys/class/scsi_device/*/device/unit_descriptor/wb_buf_alloc_units
Date: June 2020
Contact: Asutosh Das <asutoshd@codeaurora.org>
Contact: Asutosh Das <quic_asutoshd@quicinc.com>
Description: This entry shows the configured size of WriteBooster buffer.
0400h corresponds to 4GB.

View File

@ -442,7 +442,6 @@ struct blk_revalidate_zone_args {
unsigned long *conv_zones_bitmap;
unsigned long *seq_zones_wlock;
unsigned int nr_zones;
sector_t zone_sectors;
sector_t sector;
};
@ -456,40 +455,36 @@ static int blk_revalidate_zone_cb(struct blk_zone *zone, unsigned int idx,
struct gendisk *disk = args->disk;
struct request_queue *q = disk->queue;
sector_t capacity = get_capacity(disk);
sector_t zone_sectors = q->limits.chunk_sectors;
/* Check for bad zones and holes in the zone report */
if (zone->start != args->sector) {
pr_warn("%s: Zone gap at sectors %llu..%llu\n",
disk->disk_name, args->sector, zone->start);
return -ENODEV;
}
if (zone->start >= capacity || !zone->len) {
pr_warn("%s: Invalid zone start %llu, length %llu\n",
disk->disk_name, zone->start, zone->len);
return -ENODEV;
}
/*
* All zones must have the same size, with the exception on an eventual
* smaller last zone.
*/
if (zone->start == 0) {
if (zone->len == 0 || !is_power_of_2(zone->len)) {
pr_warn("%s: Invalid zoned device with non power of two zone size (%llu)\n",
disk->disk_name, zone->len);
return -ENODEV;
}
args->zone_sectors = zone->len;
args->nr_zones = (capacity + zone->len - 1) >> ilog2(zone->len);
} else if (zone->start + args->zone_sectors < capacity) {
if (zone->len != args->zone_sectors) {
if (zone->start + zone->len < capacity) {
if (zone->len != zone_sectors) {
pr_warn("%s: Invalid zoned device with non constant zone size\n",
disk->disk_name);
return -ENODEV;
}
} else {
if (zone->len > args->zone_sectors) {
} else if (zone->len > zone_sectors) {
pr_warn("%s: Invalid zoned device with larger last zone size\n",
disk->disk_name);
return -ENODEV;
}
}
/* Check for holes in the zone report */
if (zone->start != args->sector) {
pr_warn("%s: Zone gap at sectors %llu..%llu\n",
disk->disk_name, args->sector, zone->start);
return -ENODEV;
}
/* Check zone type */
switch (zone->type) {
@ -526,11 +521,13 @@ static int blk_revalidate_zone_cb(struct blk_zone *zone, unsigned int idx,
* @disk: Target disk
* @update_driver_data: Callback to update driver data on the frozen disk
*
* Helper function for low-level device drivers to (re) allocate and initialize
* a disk request queue zone bitmaps. This functions should normally be called
* within the disk ->revalidate method for blk-mq based drivers. For BIO based
* drivers only q->nr_zones needs to be updated so that the sysfs exposed value
* is correct.
* Helper function for low-level device drivers to check and (re) allocate and
* initialize a disk request queue zone bitmaps. This functions should normally
* be called within the disk ->revalidate method for blk-mq based drivers.
* Before calling this function, the device driver must already have set the
* device zone size (chunk_sector limit) and the max zone append limit.
* For BIO based drivers, this function cannot be used. BIO based device drivers
* only need to set disk->nr_zones so that the sysfs exposed value is correct.
* If the @update_driver_data callback function is not NULL, the callback is
* executed with the device request queue frozen after all zones have been
* checked.
@ -539,9 +536,9 @@ int blk_revalidate_disk_zones(struct gendisk *disk,
void (*update_driver_data)(struct gendisk *disk))
{
struct request_queue *q = disk->queue;
struct blk_revalidate_zone_args args = {
.disk = disk,
};
sector_t zone_sectors = q->limits.chunk_sectors;
sector_t capacity = get_capacity(disk);
struct blk_revalidate_zone_args args = { };
unsigned int noio_flag;
int ret;
@ -550,13 +547,31 @@ int blk_revalidate_disk_zones(struct gendisk *disk,
if (WARN_ON_ONCE(!queue_is_mq(q)))
return -EIO;
if (!get_capacity(disk))
return -EIO;
if (!capacity)
return -ENODEV;
/*
* Checks that the device driver indicated a valid zone size and that
* the max zone append limit is set.
*/
if (!zone_sectors || !is_power_of_2(zone_sectors)) {
pr_warn("%s: Invalid non power of two zone size (%llu)\n",
disk->disk_name, zone_sectors);
return -ENODEV;
}
if (!q->limits.max_zone_append_sectors) {
pr_warn("%s: Invalid 0 maximum zone append limit\n",
disk->disk_name);
return -ENODEV;
}
/*
* Ensure that all memory allocations in this context are done as if
* GFP_NOIO was specified.
*/
args.disk = disk;
args.nr_zones = (capacity + zone_sectors - 1) >> ilog2(zone_sectors);
noio_flag = memalloc_noio_save();
ret = disk->fops->report_zones(disk, 0, UINT_MAX,
blk_revalidate_zone_cb, &args);
@ -570,7 +585,7 @@ int blk_revalidate_disk_zones(struct gendisk *disk,
* If zones where reported, make sure that the entire disk capacity
* has been checked.
*/
if (ret > 0 && args.sector != get_capacity(disk)) {
if (ret > 0 && args.sector != capacity) {
pr_warn("%s: Missing zones from sector %llu\n",
disk->disk_name, args.sector);
ret = -ENODEV;
@ -583,7 +598,6 @@ int blk_revalidate_disk_zones(struct gendisk *disk,
*/
blk_mq_freeze_queue(q);
if (ret > 0) {
blk_queue_chunk_sectors(q, args.zone_sectors);
disk->nr_zones = args.nr_zones;
swap(disk->seq_zones_wlock, args.seq_zones_wlock);
swap(disk->conv_zones_bitmap, args.conv_zones_bitmap);

View File

@ -162,21 +162,15 @@ int null_register_zoned_dev(struct nullb *nullb)
disk_set_zoned(nullb->disk, BLK_ZONED_HM);
blk_queue_flag_set(QUEUE_FLAG_ZONE_RESETALL, q);
blk_queue_required_elevator_features(q, ELEVATOR_F_ZBD_SEQ_WRITE);
if (queue_is_mq(q)) {
int ret = blk_revalidate_disk_zones(nullb->disk, NULL);
if (ret)
return ret;
} else {
blk_queue_chunk_sectors(q, dev->zone_size_sects);
nullb->disk->nr_zones = bdev_nr_zones(nullb->disk->part0);
}
blk_queue_max_zone_append_sectors(q, dev->zone_size_sects);
disk_set_max_open_zones(nullb->disk, dev->zone_max_open);
disk_set_max_active_zones(nullb->disk, dev->zone_max_active);
if (queue_is_mq(q))
return blk_revalidate_disk_zones(nullb->disk, NULL);
return 0;
}

View File

@ -751,7 +751,6 @@ static int virtblk_probe_zoned_device(struct virtio_device *vdev,
{
u32 v, wg;
u8 model;
int ret;
virtio_cread(vdev, struct virtio_blk_config,
zoned.model, &model);
@ -806,6 +805,7 @@ static int virtblk_probe_zoned_device(struct virtio_device *vdev,
vblk->zone_sectors);
return -ENODEV;
}
blk_queue_chunk_sectors(q, vblk->zone_sectors);
dev_dbg(&vdev->dev, "zone sectors = %u\n", vblk->zone_sectors);
if (virtio_has_feature(vdev, VIRTIO_BLK_F_DISCARD)) {
@ -814,8 +814,6 @@ static int virtblk_probe_zoned_device(struct virtio_device *vdev,
blk_queue_max_discard_sectors(q, 0);
}
ret = blk_revalidate_disk_zones(vblk->disk, NULL);
if (!ret) {
virtio_cread(vdev, struct virtio_blk_config,
zoned.max_append_sectors, &v);
if (!v) {
@ -828,12 +826,10 @@ static int virtblk_probe_zoned_device(struct virtio_device *vdev,
wg, v);
return -ENODEV;
}
blk_queue_max_zone_append_sectors(q, v);
dev_dbg(&vdev->dev, "max append sectors = %u\n", v);
}
return ret;
return blk_revalidate_disk_zones(vblk->disk, NULL);
}
#else

View File

@ -10,12 +10,11 @@
int nvme_revalidate_zones(struct nvme_ns *ns)
{
struct request_queue *q = ns->queue;
int ret;
ret = blk_revalidate_disk_zones(ns->disk, NULL);
if (!ret)
blk_queue_chunk_sectors(q, ns->zsze);
blk_queue_max_zone_append_sectors(q, ns->ctrl->max_zone_append);
return ret;
return blk_revalidate_disk_zones(ns->disk, NULL);
}
static int nvme_set_max_append(struct nvme_ctrl *ctrl)

View File

@ -2618,7 +2618,7 @@ struct aac_hba_info {
struct aac_aifcmd {
__le32 command; /* Tell host what type of notify this is */
__le32 seqnum; /* To allow ordering of reports (if necessary) */
u8 data[1]; /* Undefined length (from kernel viewpoint) */
u8 data[]; /* Undefined length (from kernel viewpoint) */
};
/**

View File

@ -465,7 +465,7 @@ int fnic_trace_buf_init(void)
fnic_max_trace_entries = (trace_max_pages * PAGE_SIZE)/
FNIC_ENTRY_SIZE_BYTES;
fnic_trace_buf_p = (unsigned long)vzalloc(trace_max_pages * PAGE_SIZE);
fnic_trace_buf_p = (unsigned long)vcalloc(trace_max_pages, PAGE_SIZE);
if (!fnic_trace_buf_p) {
printk(KERN_ERR PFX "Failed to allocate memory "
"for fnic_trace_buf_p\n");

View File

@ -6944,7 +6944,9 @@ lpfc_unregister_fcf_rescan(struct lpfc_hba *phba)
if (rc)
return;
/* Reset HBA FCF states after successful unregister FCF */
spin_lock_irq(&phba->hbalock);
phba->fcf.fcf_flag = 0;
spin_unlock_irq(&phba->hbalock);
phba->fcf.current_rec.flag = 0;
/*

View File

@ -4462,7 +4462,6 @@ struct qla_hw_data {
/* n2n */
struct fc_els_flogi plogi_els_payld;
#define LOGIN_TEMPLATE_SIZE (sizeof(struct fc_els_flogi) - 4)
void *swl;

View File

@ -8434,7 +8434,7 @@ qla24xx_load_risc_flash(scsi_qla_host_t *vha, uint32_t *srisc_addr,
ql_dbg(ql_dbg_init, vha, 0x0163,
"-> fwdt%u template allocate template %#x words...\n",
j, risc_size);
fwdt->template = vmalloc(risc_size * sizeof(*dcode));
fwdt->template = vmalloc_array(risc_size, sizeof(*dcode));
if (!fwdt->template) {
ql_log(ql_log_warn, vha, 0x0164,
"-> fwdt%u failed allocate template.\n", j);
@ -8689,7 +8689,7 @@ qla24xx_load_risc_blob(scsi_qla_host_t *vha, uint32_t *srisc_addr)
ql_dbg(ql_dbg_init, vha, 0x0173,
"-> fwdt%u template allocate template %#x words...\n",
j, risc_size);
fwdt->template = vmalloc(risc_size * sizeof(*dcode));
fwdt->template = vmalloc_array(risc_size, sizeof(*dcode));
if (!fwdt->template) {
ql_log(ql_log_warn, vha, 0x0174,
"-> fwdt%u failed allocate template.\n", j);

View File

@ -3073,7 +3073,8 @@ qla24xx_els_dcmd2_iocb(scsi_qla_host_t *vha, int els_opcode,
memset(ptr, 0, sizeof(struct els_plogi_payload));
memset(resp_ptr, 0, sizeof(struct els_plogi_payload));
memcpy(elsio->u.els_plogi.els_plogi_pyld->data,
&ha->plogi_els_payld.fl_csp, LOGIN_TEMPLATE_SIZE);
(void *)&ha->plogi_els_payld + offsetof(struct fc_els_flogi, fl_csp),
sizeof(ha->plogi_els_payld) - offsetof(struct fc_els_flogi, fl_csp));
elsio->u.els_plogi.els_cmd = els_opcode;
elsio->u.els_plogi.els_plogi_pyld->opcode = els_opcode;
@ -3911,7 +3912,7 @@ qla2x00_start_sp(srb_t *sp)
pkt = __qla2x00_alloc_iocbs(sp->qpair, sp);
if (!pkt) {
rval = EAGAIN;
rval = -EAGAIN;
ql_log(ql_log_warn, vha, 0x700c,
"qla2x00_alloc_iocbs failed.\n");
goto done;

View File

@ -841,11 +841,6 @@ static int sdeb_zbc_nr_conv = DEF_ZBC_NR_CONV_ZONES;
static int submit_queues = DEF_SUBMIT_QUEUES; /* > 1 for multi-queue (mq) */
static int poll_queues; /* iouring iopoll interface.*/
static DEFINE_RWLOCK(atomic_rw);
static DEFINE_RWLOCK(atomic_rw2);
static rwlock_t *ramdisk_lck_a[2];
static char sdebug_proc_name[] = MY_NAME;
static const char *my_name = MY_NAME;
@ -6818,9 +6813,6 @@ static int __init scsi_debug_init(void)
int k, ret, hosts_to_add;
int idx = -1;
ramdisk_lck_a[0] = &atomic_rw;
ramdisk_lck_a[1] = &atomic_rw2;
if (sdebug_ndelay >= 1000 * 1000 * 1000) {
pr_warn("ndelay must be less than 1 second, ignored\n");
sdebug_ndelay = 0;

View File

@ -831,7 +831,6 @@ int sd_zbc_revalidate_zones(struct scsi_disk *sdkp)
struct request_queue *q = disk->queue;
u32 zone_blocks = sdkp->early_zone_info.zone_blocks;
unsigned int nr_zones = sdkp->early_zone_info.nr_zones;
u32 max_append;
int ret = 0;
unsigned int flags;
@ -876,6 +875,11 @@ int sd_zbc_revalidate_zones(struct scsi_disk *sdkp)
goto unlock;
}
blk_queue_chunk_sectors(q,
logical_to_sectors(sdkp->device, zone_blocks));
blk_queue_max_zone_append_sectors(q,
q->limits.max_segments << PAGE_SECTORS_SHIFT);
ret = blk_revalidate_disk_zones(disk, sd_zbc_revalidate_zones_cb);
memalloc_noio_restore(flags);
@ -888,12 +892,6 @@ int sd_zbc_revalidate_zones(struct scsi_disk *sdkp)
goto unlock;
}
max_append = min_t(u32, logical_to_sectors(sdkp->device, zone_blocks),
q->limits.max_segments << PAGE_SECTORS_SHIFT);
max_append = min_t(u32, max_append, queue_max_hw_sectors(q));
blk_queue_max_zone_append_sectors(q, max_append);
sd_zbc_print_zones(sdkp);
unlock:

View File

@ -318,6 +318,7 @@ enum storvsc_request_type {
#define SRB_STATUS_INVALID_REQUEST 0x06
#define SRB_STATUS_DATA_OVERRUN 0x12
#define SRB_STATUS_INVALID_LUN 0x20
#define SRB_STATUS_INTERNAL_ERROR 0x30
#define SRB_STATUS(status) \
(status & ~(SRB_STATUS_AUTOSENSE_VALID | SRB_STATUS_QUEUE_FROZEN))
@ -978,6 +979,7 @@ static void storvsc_handle_error(struct vmscsi_request *vm_srb,
case SRB_STATUS_ERROR:
case SRB_STATUS_ABORTED:
case SRB_STATUS_INVALID_REQUEST:
case SRB_STATUS_INTERNAL_ERROR:
if (vm_srb->srb_status & SRB_STATUS_AUTOSENSE_VALID) {
/* Check for capacity change */
if ((asc == 0x2a) && (ascq == 0x9)) {

View File

@ -8520,6 +8520,41 @@ out:
return ret;
}
static void ufshcd_set_timestamp_attr(struct ufs_hba *hba)
{
int err;
struct ufs_query_req *request = NULL;
struct ufs_query_res *response = NULL;
struct ufs_dev_info *dev_info = &hba->dev_info;
struct utp_upiu_query_v4_0 *upiu_data;
if (dev_info->wspecversion < 0x400)
return;
ufshcd_hold(hba);
mutex_lock(&hba->dev_cmd.lock);
ufshcd_init_query(hba, &request, &response,
UPIU_QUERY_OPCODE_WRITE_ATTR,
QUERY_ATTR_IDN_TIMESTAMP, 0, 0);
request->query_func = UPIU_QUERY_FUNC_STANDARD_WRITE_REQUEST;
upiu_data = (struct utp_upiu_query_v4_0 *)&request->upiu_req;
put_unaligned_be64(ktime_get_real_ns(), &upiu_data->osf3);
err = ufshcd_exec_dev_cmd(hba, DEV_CMD_TYPE_QUERY, QUERY_REQ_TIMEOUT);
if (err)
dev_err(hba->dev, "%s: failed to set timestamp %d\n",
__func__, err);
mutex_unlock(&hba->dev_cmd.lock);
ufshcd_release(hba);
}
/**
* ufshcd_add_lus - probe and add UFS logical units
* @hba: per-adapter instance
@ -8708,6 +8743,8 @@ static int ufshcd_device_init(struct ufs_hba *hba, bool init_dev_params)
ufshcd_set_ufs_dev_active(hba);
ufshcd_force_reset_auto_bkops(hba);
ufshcd_set_timestamp_attr(hba);
/* Gear up to HS gear if supported */
if (hba->max_pwr_info.is_valid) {
/*
@ -9749,6 +9786,7 @@ static int __ufshcd_wl_resume(struct ufs_hba *hba, enum ufs_pm_op pm_op)
ret = ufshcd_set_dev_pwr_mode(hba, UFS_ACTIVE_PWR_MODE);
if (ret)
goto set_old_link_state;
ufshcd_set_timestamp_attr(hba);
}
if (ufshcd_keep_autobkops_enabled_except_suspend(hba))

View File

@ -72,6 +72,7 @@ config SCSI_UFS_QCOM
config SCSI_UFS_MEDIATEK
tristate "Mediatek specific hooks to UFS controller platform driver"
depends on SCSI_UFSHCD_PLATFORM && ARCH_MEDIATEK
depends on RESET_CONTROLLER
select PHY_MTK_UFS
select RESET_TI_SYSCON
help

View File

@ -70,6 +70,31 @@ struct utp_upiu_query {
__be32 reserved[2];
};
/**
* struct utp_upiu_query_v4_0 - upiu request buffer structure for
* query request >= UFS 4.0 spec.
* @opcode: command to perform B-0
* @idn: a value that indicates the particular type of data B-1
* @index: Index to further identify data B-2
* @selector: Index to further identify data B-3
* @osf4: spec field B-5
* @osf5: spec field B 6,7
* @osf6: spec field DW 8,9
* @osf7: spec field DW 10,11
*/
struct utp_upiu_query_v4_0 {
__u8 opcode;
__u8 idn;
__u8 index;
__u8 selector;
__u8 osf3;
__u8 osf4;
__be16 osf5;
__be32 osf6;
__be32 osf7;
__be32 reserved;
};
/**
* struct utp_upiu_cmd - Command UPIU structure
* @data_transfer_len: Data Transfer Length DW-3

View File

@ -170,6 +170,7 @@ enum attr_idn {
QUERY_ATTR_IDN_WB_BUFF_LIFE_TIME_EST = 0x1E,
QUERY_ATTR_IDN_CURR_WB_BUFF_SIZE = 0x1F,
QUERY_ATTR_IDN_EXT_IID_EN = 0x2A,
QUERY_ATTR_IDN_TIMESTAMP = 0x30
};
/* Descriptor idn for Query requests */