iv/linux
1
0
Fork 0
Code Issues Pull Requests Actions Packages Projects Releases Wiki Activity

Merge 5.4-rc3 into usb-next

Browse Source 
we want the USB fixes in here as well.

Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
This commit is contained in:
Greg Kroah-Hartman 2019-10-14 07:09:59 +02:00
commit bf7c1d95af
677 changed files with 6071 additions and 6391 deletions
Show Stats Download Patch File Download Diff File Expand all files Collapse all files

4
CREDITS
View File

@ -1637,6 +1637,10 @@ S: Panoramastrasse 18
S: D-69126 Heidelberg
S: Germany
N: Simon Horman
M: horms@verge.net.au
D: Renesas ARM/ARM64 SoC maintainer
N: Christopher Horn
E: chorn@warwick.net
D: Miscellaneous sysctl hacks

20
Documentation/admin-guide/cgroup-v2.rst
View File

@ -615,8 +615,8 @@ on an IO device and is an example of this type.
Protections
-----------
A cgroup is protected to be allocated upto the configured amount of
the resource if the usages of all its ancestors are under their
A cgroup is protected upto the configured amount of the resource
as long as the usages of all its ancestors are under their
protected levels. Protections can be hard guarantees or best effort
soft boundaries. Protections can also be over-committed in which case
only upto the amount available to the parent is protected among
@ -1096,7 +1096,10 @@ PAGE_SIZE multiple when read back.
is within its effective min boundary, the cgroup's memory
won't be reclaimed under any conditions. If there is no
unprotected reclaimable memory available, OOM killer
is invoked.
is invoked. Above the effective min boundary (or
effective low boundary if it is higher), pages are reclaimed
proportionally to the overage, reducing reclaim pressure for
smaller overages.
Effective min boundary is limited by memory.min values of
all ancestor cgroups. If there is memory.min overcommitment
@ -1118,7 +1121,10 @@ PAGE_SIZE multiple when read back.
Best-effort memory protection. If the memory usage of a
cgroup is within its effective low boundary, the cgroup's
memory won't be reclaimed unless memory can be reclaimed
from unprotected cgroups.
from unprotected cgroups. Above the effective low boundary (or
effective min boundary if it is higher), pages are reclaimed
proportionally to the overage, reducing reclaim pressure for
smaller overages.
Effective low boundary is limited by memory.low values of
all ancestor cgroups. If there is memory.low overcommitment
@ -2482,8 +2488,10 @@ system performance due to overreclaim, to the point where the feature
becomes self-defeating.
The memory.low boundary on the other hand is a top-down allocated
reserve. A cgroup enjoys reclaim protection when it's within its low,
which makes delegation of subtrees possible.
reserve. A cgroup enjoys reclaim protection when it's within its
effective low, which makes delegation of subtrees possible. It also
enjoys having reclaim pressure proportional to its overage when
above its effective low.
The original high boundary, the hard limit, is defined as a strict
limit that can not budge, even if the OOM killer has to be called.

4
Documentation/admin-guide/kernel-parameters.txt
View File

@ -5302,6 +5302,10 @@
the unplug protocol
never -- do not unplug even if version check succeeds
xen_legacy_crash [X86,XEN]
Crash from Xen panic notifier, without executing late
panic() code such as dumping handler.
xen_nopvspin [X86,XEN]
Disables the ticketlock slowpath using Xen PV
optimizations.

7
Documentation/arm64/memory.rst
View File

@ -154,11 +154,18 @@ return virtual addresses to userspace from a 48-bit range.
Software can "opt-in" to receiving VAs from a 52-bit space by
specifying an mmap hint parameter that is larger than 48-bit.
For example:
.. code-block:: c
maybe_high_address = mmap(~0UL, size, prot, flags,...);
It is also possible to build a debug kernel that returns addresses
from a 52-bit space by enabling the following kernel config options:
.. code-block:: sh
CONFIG_EXPERT=y && CONFIG_ARM64_FORCE_52BIT=y
Note that this option is only intended for debugging applications

1
Documentation/core-api/index.rst
View File

@ -38,6 +38,7 @@ Core utilities
protection-keys
../RCU/index
gcc-plugins
symbol-namespaces
Interfaces for kernel debugging

4
Documentation/core-api/memory-allocation.rst
View File

@ -98,6 +98,10 @@ limited. The actual limit depends on the hardware and the kernel
configuration, but it is a good practice to use `kmalloc` for objects
smaller than page size.
The address of a chunk allocated with `kmalloc` is aligned to at least
ARCH_KMALLOC_MINALIGN bytes. For sizes which are a power of two, the
alignment is also guaranteed to be at least the respective size.
For large allocations you can use :c:func:`vmalloc` and
:c:func:`vzalloc`, or directly request pages from the page
allocator. The memory allocated by `vmalloc` and related functions is

0
Documentation/kbuild/namespaces.rst → Documentation/core-api/symbol-namespaces.rst
View File

16
Documentation/dev-tools/kselftest.rst
View File

@ -89,6 +89,22 @@ To build, save output files in a separate directory with KBUILD_OUTPUT ::
$ export KBUILD_OUTPUT=/tmp/kselftest; make TARGETS="size timers" kselftest
Additionally you can use the "SKIP_TARGETS" variable on the make command
line to specify one or more targets to exclude from the TARGETS list.
To run all tests but a single subsystem::
$ make -C tools/testing/selftests SKIP_TARGETS=ptrace run_tests
You can specify multiple tests to skip::
$ make SKIP_TARGETS="size timers" kselftest
You can also specify a restricted list of tests to run together with a
dedicated skiplist::
$ make TARGETS="bpf breakpoints size timers" SKIP_TARGETS=bpf kselftest
See the top-level tools/testing/selftests/Makefile for the list of all
possible targets.

1
Documentation/devicetree/bindings/dsp/fsl,dsp.yaml
View File

@ -85,4 +85,5 @@ examples:
<&pd IMX_SC_R_DSP_RAM>;
mbox-names = "txdb0", "txdb1", "rxdb0", "rxdb1";
mboxes = <&lsio_mu13 2 0>, <&lsio_mu13 2 1>, <&lsio_mu13 3 0>, <&lsio_mu13 3 1>;
memory-region = <&dsp_reserved>;
};

7
Documentation/devicetree/bindings/iio/adc/adi,ad7192.yaml
View File

@ -43,13 +43,9 @@ properties:
dvdd-supply:
description: DVdd voltage supply
items:
- const: dvdd
avdd-supply:
description: AVdd voltage supply
items:
- const: avdd
adi,rejection-60-Hz-enable:
description: |
@ -99,6 +95,9 @@ required:
examples:
- |
spi0 {
#address-cells = <1>;
#size-cells = <0>;
adc@0 {
compatible = "adi,ad7192";
reg = <0>;

1
Documentation/devicetree/bindings/media/rc.yaml
View File

@ -73,7 +73,6 @@ properties:
- rc-genius-tvgo-a11mce
- rc-gotview7135
- rc-hauppauge
- rc-hauppauge
- rc-hisi-poplar
- rc-hisi-tv-demo
- rc-imon-mce

2
Documentation/devicetree/bindings/phy/lantiq,vrx200-pcie-phy.yaml
View File

@ -37,7 +37,7 @@ properties:
- description: exclusive PHY reset line
- description: shared reset line between the PCIe PHY and PCIe controller
resets-names:
reset-names:
items:
- const: phy
- const: pcie

2
Documentation/devicetree/bindings/serial/renesas,sci-serial.txt
View File

@ -26,6 +26,8 @@ Required properties:
- "renesas,hscif-r8a77470" for R8A77470 (RZ/G1C) HSCIF compatible UART.
- "renesas,scif-r8a774a1" for R8A774A1 (RZ/G2M) SCIF compatible UART.
- "renesas,hscif-r8a774a1" for R8A774A1 (RZ/G2M) HSCIF compatible UART.
- "renesas,scif-r8a774b1" for R8A774B1 (RZ/G2N) SCIF compatible UART.
- "renesas,hscif-r8a774b1" for R8A774B1 (RZ/G2N) HSCIF compatible UART.
- "renesas,scif-r8a774c0" for R8A774C0 (RZ/G2E) SCIF compatible UART.
- "renesas,hscif-r8a774c0" for R8A774C0 (RZ/G2E) HSCIF compatible UART.
- "renesas,scif-r8a7778" for R8A7778 (R-Car M1) SCIF compatible UART.

4
Documentation/devicetree/bindings/usb/amlogic,dwc3.txt
View File

@ -85,8 +85,8 @@ A child node must exist to represent the core DWC2 IP block. The name of
the node is not important. The content of the node is defined in dwc2.txt.
PHY documentation is provided in the following places:
- Documentation/devicetree/bindings/phy/meson-g12a-usb2-phy.txt
- Documentation/devicetree/bindings/phy/meson-g12a-usb3-pcie-phy.txt
- Documentation/devicetree/bindings/phy/amlogic,meson-g12a-usb2-phy.yaml
- Documentation/devicetree/bindings/phy/amlogic,meson-g12a-usb3-pcie-phy.yaml
Example device nodes:
usb: usb@ffe09000 {

7
Documentation/devicetree/bindings/usb/generic-ehci.yaml
View File

@ -63,7 +63,11 @@ properties:
description:
Set this flag to force EHCI reset after resume.
phys: true
phys:
description: PHY specifier for the USB PHY
phy-names:
const: usb
required:
- compatible
@ -89,6 +93,7 @@ examples:
interrupts = <39>;
clocks = <&ahb_gates 1>;
phys = <&usbphy 1>;
phy-names = "usb";
};
...

7
Documentation/devicetree/bindings/usb/generic-ohci.yaml
View File

@ -67,7 +67,11 @@ properties:
description:
Overrides the detected port count
phys: true
phys:
description: PHY specifier for the USB PHY
phy-names:
const: usb
required:
- compatible
@ -84,6 +88,7 @@ examples:
interrupts = <64>;
clocks = <&usb_clk 6>, <&ahb_gates 2>;
phys = <&usbphy 1>;
phy-names = "usb";
};
...

4
Documentation/devicetree/bindings/usb/mediatek,mtk-xhci.txt
View File

@ -33,7 +33,7 @@ Required properties:
"dma_ck": dma_bus clock for data transfer by DMA,
"xhci_ck": controller clock
- phys : see usb-hcd.txt in the current directory
- phys : see usb-hcd.yaml in the current directory
Optional properties:
- wakeup-source : enable USB remote wakeup;
@ -53,7 +53,7 @@ Optional properties:
See: Documentation/devicetree/bindings/pinctrl/pinctrl-bindings.txt
- imod-interval-ns: default interrupt moderation interval is 5000ns
additionally the properties from usb-hcd.txt (in the current directory) are
additionally the properties from usb-hcd.yaml (in the current directory) are
supported.
Example:

4
Documentation/devicetree/bindings/usb/mediatek,mtu3.txt
View File

@ -17,7 +17,7 @@ Required properties:
- clock-names : must contain "sys_ck" for clock of controller,
the following clocks are optional:
"ref_ck", "mcu_ck" and "dma_ck";
- phys : see usb-hcd.txt in the current directory
- phys : see usb-hcd.yaml in the current directory
- dr_mode : should be one of "host", "peripheral" or "otg",
refer to usb/generic.txt
@ -60,7 +60,7 @@ Optional properties:
- mediatek,u3p-dis-msk : mask to disable u3ports, bit0 for u3port0,
bit1 for u3port1, ... etc;
additionally the properties from usb-hcd.txt (in the current directory) are
additionally the properties from usb-hcd.yaml (in the current directory) are
supported.
Sub-nodes:

5
Documentation/devicetree/bindings/usb/usb-hcd.yaml
View File

@ -18,8 +18,13 @@ properties:
description:
List of all the USB PHYs on this HCD
phy-names:
description:
Name specifier for the USB PHY
examples:
- |
usb {
phys = <&usb2_phy1>, <&usb3_phy1>;
phy-names = "usb";
};

2
Documentation/devicetree/bindings/usb/usb-uhci.txt
View File

@ -6,7 +6,7 @@ Required properties:
- reg : Should contain 1 register ranges(address and length)
- interrupts : UHCI controller interrupt
additionally the properties from usb-hcd.txt (in the current directory) are
additionally the properties from usb-hcd.yaml (in the current directory) are
supported.
Example:

4
Documentation/devicetree/bindings/usb/usb-xhci.txt
View File

@ -42,9 +42,9 @@ Optional properties:
- usb3-lpm-capable: determines if platform is USB3 LPM capable
- quirk-broken-port-ped: set if the controller has broken port disable mechanism
- imod-interval-ns: default interrupt moderation interval is 5000ns
- phys : see usb-hcd.txt in the current directory
- phys : see usb-hcd.yaml in the current directory
additionally the properties from usb-hcd.txt (in the current directory) are
additionally the properties from usb-hcd.yaml (in the current directory) are
supported.

1
Documentation/hwmon/index.rst
View File

@ -7,6 +7,7 @@ Linux Hardware Monitoring
hwmon-kernel-api
pmbus-core
inspur-ipsps1
submitting-patches
sysfs-interface
userspace-tools

2
Documentation/hwmon/inspur-ipsps1.rst
View File

@ -1,5 +1,5 @@
Kernel driver inspur-ipsps1
=======================
===========================
Supported chips:

18
Documentation/hwmon/k10temp.rst
View File

@ -21,10 +21,17 @@ Supported chips:
* AMD Family 14h processors: "Brazos" (C/E/G/Z-Series)
* AMD Family 15h processors: "Bulldozer" (FX-Series), "Trinity", "Kaveri", "Carrizo"
* AMD Family 15h processors: "Bulldozer" (FX-Series), "Trinity", "Kaveri",
"Carrizo", "Stoney Ridge", "Bristol Ridge"
* AMD Family 16h processors: "Kabini", "Mullins"
* AMD Family 17h processors: "Zen", "Zen 2"
* AMD Family 18h processors: "Hygon Dhyana"
* AMD Family 19h processors: "Zen 3"
Prefix: 'k10temp'
Addresses scanned: PCI space
@ -110,3 +117,12 @@ The maximum value for Tctl is available in the file temp1_max.
If the BIOS has enabled hardware temperature control, the threshold at
which the processor will throttle itself to avoid damage is available in
temp1_crit and temp1_crit_hyst.
On some AMD CPUs, there is a difference between the die temperature (Tdie) and
the reported temperature (Tctl). Tdie is the real measured temperature, and
Tctl is used for fan control. While Tctl is always available as temp1_input,
the driver exports Tdie temperature as temp2_input for those CPUs which support
it.
Models from 17h family report relative temperature, the driver aims to
compensate and report the real temperature.

5
Documentation/kbuild/makefiles.rst
View File

@ -954,11 +954,6 @@ When kbuild executes, the following steps are followed (roughly):
From commandline LDFLAGS_MODULE shall be used (see kbuild.txt).
KBUILD_ARFLAGS Options for $(AR) when creating archives
$(KBUILD_ARFLAGS) set by the top level Makefile to "D" (deterministic
mode) if this option is supported by $(AR).
KBUILD_LDS
The linker script with full path. Assigned by the top-level Makefile.

7
Documentation/kbuild/modules.rst
View File

@ -498,10 +498,11 @@ build.
will be written containing all exported symbols that were not
defined in the kernel.
--- 6.3 Symbols From Another External Module
6.3 Symbols From Another External Module
----------------------------------------
Sometimes, an external module uses exported symbols from
another external module. kbuild needs to have full knowledge of
another external module. Kbuild needs to have full knowledge of
all symbols to avoid spitting out warnings about undefined
symbols. Three solutions exist for this situation.
@ -521,7 +522,7 @@ build.
The top-level kbuild file would then look like::
#./Kbuild (or ./Makefile):
obj-y := foo/ bar/
obj-m := foo/ bar/
And executing::

13
Documentation/kbuild/reproducible-builds.rst
View File

@ -16,16 +16,21 @@ the kernel may be unreproducible, and how to avoid them.
Timestamps
----------
The kernel embeds a timestamp in two places:
The kernel embeds timestamps in three places:
* The version string exposed by ``uname()`` and included in
``/proc/version``
* File timestamps in the embedded initramfs
By default the timestamp is the current time. This must be overridden
using the `KBUILD_BUILD_TIMESTAMP`_ variable. If you are building
from a git commit, you could use its commit date.
* If enabled via ``CONFIG_IKHEADERS``, file timestamps of kernel
headers embedded in the kernel or respective module,
exposed via ``/sys/kernel/kheaders.tar.xz``
By default the timestamp is the current time and in the case of
``kheaders`` the various files' modification times. This must
be overridden using the `KBUILD_BUILD_TIMESTAMP`_ variable.
If you are building from a git commit, you could use its commit date.
The kernel does *not* use the ``__DATE__`` and ``__TIME__`` macros,
and enables warnings if they are used. If you incorporate external

1
Documentation/networking/device_drivers/index.rst
View File

@ -23,6 +23,7 @@ Contents:
intel/ice
google/gve
mellanox/mlx5
netronome/nfp
pensando/ionic
.. only:: subproject and html

2
Documentation/networking/j1939.rst
View File

@ -272,7 +272,7 @@ supported flags are:
* MSG_DONTWAIT, i.e. non-blocking operation.
recvmsg(2)
^^^^^^^^^
^^^^^^^^^^
In most cases recvmsg(2) is needed if you want to extract more information than
recvfrom(2) can provide. For example package priority and timestamp. The

2
Documentation/process/coding-style.rst
View File

@ -56,7 +56,7 @@ instead of ``double-indenting`` the ``case`` labels. E.g.:
case 'K':
case 'k':
mem <<= 10;
/* fall through */
fallthrough;
default:
break;
}

33
Documentation/process/deprecated.rst
View File

@ -122,14 +122,27 @@ memory adjacent to the stack (when built without `CONFIG_VMAP_STACK=y`)
Implicit switch case fall-through
---------------------------------
The C language allows switch cases to "fall through" when
a "break" statement is missing at the end of a case. This,
however, introduces ambiguity in the code, as it's not always
clear if the missing break is intentional or a bug. As there
have been a long list of flaws `due to missing "break" statements
The C language allows switch cases to "fall-through" when a "break" statement
is missing at the end of a case. This, however, introduces ambiguity in the
code, as it's not always clear if the missing break is intentional or a bug.
As there have been a long list of flaws `due to missing "break" statements
<https://cwe.mitre.org/data/definitions/484.html>`_, we no longer allow
"implicit fall-through". In order to identify an intentional fall-through
case, we have adopted the marking used by static analyzers: a comment
saying `/* Fall through */`. Once the C++17 `__attribute__((fallthrough))`
is more widely handled by C compilers, static analyzers, and IDEs, we can
switch to using that instead.
"implicit fall-through".
In order to identify intentional fall-through cases, we have adopted a
pseudo-keyword macro 'fallthrough' which expands to gcc's extension
__attribute__((__fallthrough__)). `Statement Attributes
<https://gcc.gnu.org/onlinedocs/gcc/Statement-Attributes.html>`_
When the C17/C18 [[fallthrough]] syntax is more commonly supported by
C compilers, static analyzers, and IDEs, we can switch to using that syntax
for the macro pseudo-keyword.
All switch/case blocks must end in one of:
break;
fallthrough;
continue;
goto <label>;
return [expression];

109
Documentation/usb/rio.rst
View File

@ -1,109 +0,0 @@
============
Diamonds Rio
============
Copyright (C) 1999, 2000 Bruce Tenison
Portions Copyright (C) 1999, 2000 David Nelson
Thanks to David Nelson for guidance and the usage of the scanner.txt
and scanner.c files to model our driver and this informative file.
Mar. 2, 2000
Changes
=======
- Initial Revision
Overview
========
This README will address issues regarding how to configure the kernel
to access a RIO 500 mp3 player.
Before I explain how to use this to access the Rio500 please be warned:
.. warning::
Please note that this software is still under development. The authors
are in no way responsible for any damage that may occur, no matter how
inconsequential.
It seems that the Rio has a problem when sending .mp3 with low batteries.
I suggest when the batteries are low and you want to transfer stuff that you
replace it with a fresh one. In my case, what happened is I lost two 16kb
blocks (they are no longer usable to store information to it). But I don't
know if that's normal or not; it could simply be a problem with the flash
memory.
In an extreme case, I left my Rio playing overnight and the batteries wore
down to nothing and appear to have corrupted the flash memory. My RIO
needed to be replaced as a result. Diamond tech support is aware of the
problem. Do NOT allow your batteries to wear down to nothing before
changing them. It appears RIO 500 firmware does not handle low battery
power well at all.
On systems with OHCI controllers, the kernel OHCI code appears to have
power on problems with some chipsets. If you are having problems
connecting to your RIO 500, try turning it on first and then plugging it
into the USB cable.
Contact Information
-------------------
The main page for the project is hosted at sourceforge.net in the following
URL: <http://rio500.sourceforge.net>. You can also go to the project's
sourceforge home page at: <http://sourceforge.net/projects/rio500/>.
There is also a mailing list: rio500-users@lists.sourceforge.net
Authors
-------
Most of the code was written by Cesar Miquel <miquel@df.uba.ar>. Keith
Clayton <kclayton@jps.net> is incharge of the PPC port and making sure
things work there. Bruce Tenison <btenison@dibbs.net> is adding support
for .fon files and also does testing. The program will mostly sure be
re-written and Pete Ikusz along with the rest will re-design it. I would
also like to thank Tri Nguyen <tmn_3022000@hotmail.com> who provided use
with some important information regarding the communication with the Rio.
Additional Information and userspace tools
http://rio500.sourceforge.net/
Requirements
============
A host with a USB port running a Linux kernel with RIO 500 support enabled.
The driver is a module called rio500, which should be automatically loaded
as you plug in your device. If that fails you can manually load it with
modprobe rio500
Udev should automatically create a device node as soon as plug in your device.
If that fails, you can manually add a device for the USB rio500::
mknod /dev/usb/rio500 c 180 64
In that case, set appropriate permissions for /dev/usb/rio500 (don't forget
about group and world permissions). Both read and write permissions are
required for proper operation.
That's it. The Rio500 Utils at: http://rio500.sourceforge.net should
be able to access the rio500.
Limits
======
You can use only a single rio500 device at a time with your computer.
Bugs
====
If you encounter any problems feel free to drop me an email.
Bruce Tenison
btenison@dibbs.net

17
MAINTAINERS
View File

@ -2165,12 +2165,10 @@ F: arch/arm64/boot/dts/realtek/
F: Documentation/devicetree/bindings/arm/realtek.yaml
ARM/RENESAS ARM64 ARCHITECTURE
M: Simon Horman <horms@verge.net.au>
M: Geert Uytterhoeven <geert+renesas@glider.be>
M: Magnus Damm <magnus.damm@gmail.com>
L: linux-renesas-soc@vger.kernel.org
Q: http://patchwork.kernel.org/project/linux-renesas-soc/list/
T: git git://git.kernel.org/pub/scm/linux/kernel/git/horms/renesas.git next
T: git git://git.kernel.org/pub/scm/linux/kernel/git/geert/renesas-devel.git next
S: Supported
F: arch/arm64/boot/dts/renesas/
@ -2282,12 +2280,10 @@ S: Maintained
F: drivers/media/platform/s5p-mfc/
ARM/SHMOBILE ARM ARCHITECTURE
M: Simon Horman <horms@verge.net.au>
M: Geert Uytterhoeven <geert+renesas@glider.be>
M: Magnus Damm <magnus.damm@gmail.com>
L: linux-renesas-soc@vger.kernel.org
Q: http://patchwork.kernel.org/project/linux-renesas-soc/list/
T: git git://git.kernel.org/pub/scm/linux/kernel/git/horms/renesas.git next
T: git git://git.kernel.org/pub/scm/linux/kernel/git/geert/renesas-devel.git next
S: Supported
F: arch/arm/boot/dts/emev2*
@ -6112,7 +6108,10 @@ M: Gao Xiang <gaoxiang25@huawei.com>
M: Chao Yu <yuchao0@huawei.com>
L: linux-erofs@lists.ozlabs.org
S: Maintained
T: git git://git.kernel.org/pub/scm/linux/kernel/git/xiang/erofs.git
F: Documentation/filesystems/erofs.txt
F: fs/erofs/
F: include/trace/events/erofs.h
ERRSEQ ERROR TRACKING INFRASTRUCTURE
M: Jeff Layton <jlayton@kernel.org>
@ -9075,6 +9074,7 @@ F: security/keys/
KGDB / KDB /debug_core
M: Jason Wessel <jason.wessel@windriver.com>
M: Daniel Thompson <daniel.thompson@linaro.org>
R: Douglas Anderson <dianders@chromium.org>
W: http://kgdb.wiki.kernel.org/
L: kgdb-bugreport@lists.sourceforge.net
T: git git://git.kernel.org/pub/scm/linux/kernel/git/jwessel/kgdb.git
@ -9183,6 +9183,7 @@ M: Pavel Machek <pavel@ucw.cz>
R: Dan Murphy <dmurphy@ti.com>
L: linux-leds@vger.kernel.org
T: git git://git.kernel.org/pub/scm/linux/kernel/git/j.anaszewski/linux-leds.git
T: git git://git.kernel.org/pub/scm/linux/kernel/git/pavel/linux-leds.git
S: Maintained
F: Documentation/devicetree/bindings/leds/
F: drivers/leds/
@ -11543,6 +11544,7 @@ NSDEPS
M: Matthias Maennich <maennich@google.com>
S: Maintained
F: scripts/nsdeps
F: Documentation/core-api/symbol-namespaces.rst
NTB AMD DRIVER
M: Shyam Sundar S K <Shyam-sundar.S-k@amd.com>
@ -16762,13 +16764,6 @@ W: http://www.linux-usb.org/usbnet
S: Maintained
F: drivers/net/usb/dm9601.c
USB DIAMOND RIO500 DRIVER
M: Cesar Miquel <miquel@df.uba.ar>
L: rio500-users@lists.sourceforge.net
W: http://rio500.sourceforge.net
S: Maintained
F: drivers/usb/misc/rio500*
USB EHCI DRIVER
M: Alan Stern <stern@rowland.harvard.edu>
L: linux-usb@vger.kernel.org

35
Makefile
View File

@ -2,8 +2,8 @@
VERSION = 5
PATCHLEVEL = 4
SUBLEVEL = 0
EXTRAVERSION = -rc1
NAME = Bobtail Squid
EXTRAVERSION = -rc3
NAME = Nesting Opossum
# *DOCUMENTATION*
# To see a list of typical targets execute "make help"
@ -206,24 +206,8 @@ ifndef KBUILD_CHECKSRC
KBUILD_CHECKSRC = 0
endif
# Use make M=dir to specify directory of external module to build
# Old syntax make ... SUBDIRS=$PWD is still supported
# Setting the environment variable KBUILD_EXTMOD take precedence
ifdef SUBDIRS
$(warning ================= WARNING ================)
$(warning 'SUBDIRS' will be removed after Linux 5.3)
$(warning )
$(warning If you are building an individual subdirectory)
$(warning in the kernel tree, you can do like this:)
$(warning $$ make path/to/dir/you/want/to/build/)
$(warning (Do not forget the trailing slash))
$(warning )
$(warning If you are building an external module,)
$(warning Please use 'M=' or 'KBUILD_EXTMOD' instead)
$(warning ==========================================)
KBUILD_EXTMOD ?= $(SUBDIRS)
endif
# Use make M=dir or set the environment variable KBUILD_EXTMOD to specify the
# directory of external module to build. Setting M= takes precedence.
ifeq ("$(origin M)", "command line")
KBUILD_EXTMOD := $(M)
endif
@ -498,7 +482,6 @@ export CFLAGS_KASAN CFLAGS_KASAN_NOSANITIZE CFLAGS_UBSAN
export KBUILD_AFLAGS AFLAGS_KERNEL AFLAGS_MODULE
export KBUILD_AFLAGS_MODULE KBUILD_CFLAGS_MODULE KBUILD_LDFLAGS_MODULE
export KBUILD_AFLAGS_KERNEL KBUILD_CFLAGS_KERNEL
export KBUILD_ARFLAGS
# Files to ignore in find ... statements
@ -616,7 +599,7 @@ endif
# in addition to whatever we do anyway.
# Just "make" or "make all" shall build modules as well
ifneq ($(filter all _all modules,$(MAKECMDGOALS)),)
ifneq ($(filter all _all modules nsdeps,$(MAKECMDGOALS)),)
KBUILD_MODULES := 1
endif
@ -914,9 +897,6 @@ ifdef CONFIG_RETPOLINE
KBUILD_CFLAGS += $(call cc-option,-fcf-protection=none)
endif
# use the deterministic mode of AR if available
KBUILD_ARFLAGS := $(call ar-option,D)
include scripts/Makefile.kasan
include scripts/Makefile.extrawarn
include scripts/Makefile.ubsan
@ -1237,9 +1217,8 @@ PHONY += kselftest
kselftest:
$(Q)$(MAKE) -C $(srctree)/tools/testing/selftests run_tests
PHONY += kselftest-clean
kselftest-clean:
$(Q)$(MAKE) -C $(srctree)/tools/testing/selftests clean
kselftest-%: FORCE
$(Q)$(MAKE) -C $(srctree)/tools/testing/selftests $*
PHONY += kselftest-merge
kselftest-merge:

2
arch/arm/boot/dts/am335x-icev2.dts
View File

@ -432,7 +432,7 @@
pinctrl-0 = <&mmc0_pins_default>;
};
&gpio0 {
&gpio0_target {
/* Do not idle the GPIO used for holding the VTT regulator */
ti,no-reset-on-init;
ti,no-idle-on-init;

6
arch/arm/boot/dts/am33xx-l4.dtsi
View File

@ -127,7 +127,7 @@
ranges = <0x0 0x5000 0x1000>;
};
target-module@7000 { /* 0x44e07000, ap 14 20.0 */
gpio0_target: target-module@7000 { /* 0x44e07000, ap 14 20.0 */
compatible = "ti,sysc-omap2", "ti,sysc";
ti,hwmods = "gpio1";
reg = <0x7000 0x4>,
@ -2038,7 +2038,9 @@
reg = <0xe000 0x4>,
<0xe054 0x4>;
reg-names = "rev", "sysc";
ti,sysc-midle ;
ti,sysc-midle = <SYSC_IDLE_FORCE>,
<SYSC_IDLE_NO>,
<SYSC_IDLE_SMART>;
ti,sysc-sidle = <SYSC_IDLE_FORCE>,
<SYSC_IDLE_NO>,
<SYSC_IDLE_SMART>;

2
arch/arm/boot/dts/am4372.dtsi
View File

@ -337,6 +337,8 @@
ti,hwmods = "dss_dispc";
clocks = <&disp_clk>;
clock-names = "fck";
max-memory-bandwidth = <230000000>;
};
rfbi: rfbi@4832a800 {

48
arch/arm/boot/dts/dra7-l4.dtsi
View File

@ -2732,7 +2732,7 @@
interrupt-names = "tx", "rx";
dmas = <&edma_xbar 129 1>, <&edma_xbar 128 1>;
dma-names = "tx", "rx";
clocks = <&ipu_clkctrl DRA7_IPU_MCASP1_CLKCTRL 22>,
clocks = <&ipu_clkctrl DRA7_IPU_MCASP1_CLKCTRL 0>,
<&ipu_clkctrl DRA7_IPU_MCASP1_CLKCTRL 24>,
<&ipu_clkctrl DRA7_IPU_MCASP1_CLKCTRL 28>;
clock-names = "fck", "ahclkx", "ahclkr";
@ -2768,8 +2768,8 @@
interrupt-names = "tx", "rx";
dmas = <&edma_xbar 131 1>, <&edma_xbar 130 1>;
dma-names = "tx", "rx";
clocks = <&l4per2_clkctrl DRA7_L4PER2_MCASP2_CLKCTRL 22>,
<&l4per2_clkctrl DRA7_L4PER2_MCASP2_CLKCTRL 24>,
clocks = <&l4per2_clkctrl DRA7_L4PER2_MCASP2_CLKCTRL 0>,
<&ipu_clkctrl DRA7_IPU_MCASP1_CLKCTRL 24>,
<&l4per2_clkctrl DRA7_L4PER2_MCASP2_CLKCTRL 28>;
clock-names = "fck", "ahclkx", "ahclkr";
status = "disabled";
@ -2786,9 +2786,8 @@
<SYSC_IDLE_SMART>;
/* Domains (P, C): l4per_pwrdm, l4per2_clkdm */
clocks = <&l4per2_clkctrl DRA7_L4PER2_MCASP3_CLKCTRL 0>,
<&l4per2_clkctrl DRA7_L4PER2_MCASP3_CLKCTRL 24>,
<&l4per2_clkctrl DRA7_L4PER2_MCASP3_CLKCTRL 28>;
clock-names = "fck", "ahclkx", "ahclkr";
<&l4per2_clkctrl DRA7_L4PER2_MCASP3_CLKCTRL 24>;
clock-names = "fck", "ahclkx";
#address-cells = <1>;
#size-cells = <1>;
ranges = <0x0 0x68000 0x2000>,
@ -2804,7 +2803,7 @@
interrupt-names = "tx", "rx";
dmas = <&edma_xbar 133 1>, <&edma_xbar 132 1>;
dma-names = "tx", "rx";
clocks = <&l4per2_clkctrl DRA7_L4PER2_MCASP3_CLKCTRL 22>,
clocks = <&l4per2_clkctrl DRA7_L4PER2_MCASP3_CLKCTRL 0>,
<&l4per2_clkctrl DRA7_L4PER2_MCASP3_CLKCTRL 24>;
clock-names = "fck", "ahclkx";
status = "disabled";
@ -2821,9 +2820,8 @@
<SYSC_IDLE_SMART>;
/* Domains (P, C): l4per_pwrdm, l4per2_clkdm */
clocks = <&l4per2_clkctrl DRA7_L4PER2_MCASP4_CLKCTRL 0>,
<&l4per2_clkctrl DRA7_L4PER2_MCASP4_CLKCTRL 24>,
<&l4per2_clkctrl DRA7_L4PER2_MCASP4_CLKCTRL 28>;
clock-names = "fck", "ahclkx", "ahclkr";
<&l4per2_clkctrl DRA7_L4PER2_MCASP4_CLKCTRL 24>;
clock-names = "fck", "ahclkx";
#address-cells = <1>;
#size-cells = <1>;
ranges = <0x0 0x6c000 0x2000>,
@ -2839,7 +2837,7 @@
interrupt-names = "tx", "rx";
dmas = <&edma_xbar 135 1>, <&edma_xbar 134 1>;
dma-names = "tx", "rx";
clocks = <&l4per2_clkctrl DRA7_L4PER2_MCASP4_CLKCTRL 22>,
clocks = <&l4per2_clkctrl DRA7_L4PER2_MCASP4_CLKCTRL 0>,
<&l4per2_clkctrl DRA7_L4PER2_MCASP4_CLKCTRL 24>;
clock-names = "fck", "ahclkx";
status = "disabled";
@ -2856,9 +2854,8 @@
<SYSC_IDLE_SMART>;
/* Domains (P, C): l4per_pwrdm, l4per2_clkdm */
clocks = <&l4per2_clkctrl DRA7_L4PER2_MCASP5_CLKCTRL 0>,
<&l4per2_clkctrl DRA7_L4PER2_MCASP5_CLKCTRL 24>,
<&l4per2_clkctrl DRA7_L4PER2_MCASP5_CLKCTRL 28>;
clock-names = "fck", "ahclkx", "ahclkr";
<&l4per2_clkctrl DRA7_L4PER2_MCASP5_CLKCTRL 24>;
clock-names = "fck", "ahclkx";
#address-cells = <1>;
#size-cells = <1>;
ranges = <0x0 0x70000 0x2000>,
@ -2874,7 +2871,7 @@
interrupt-names = "tx", "rx";
dmas = <&edma_xbar 137 1>, <&edma_xbar 136 1>;
dma-names = "tx", "rx";
clocks = <&l4per2_clkctrl DRA7_L4PER2_MCASP5_CLKCTRL 22>,
clocks = <&l4per2_clkctrl DRA7_L4PER2_MCASP5_CLKCTRL 0>,
<&l4per2_clkctrl DRA7_L4PER2_MCASP5_CLKCTRL 24>;
clock-names = "fck", "ahclkx";
status = "disabled";
@ -2891,9 +2888,8 @@
<SYSC_IDLE_SMART>;
/* Domains (P, C): l4per_pwrdm, l4per2_clkdm */
clocks = <&l4per2_clkctrl DRA7_L4PER2_MCASP6_CLKCTRL 0>,
<&l4per2_clkctrl DRA7_L4PER2_MCASP6_CLKCTRL 24>,
<&l4per2_clkctrl DRA7_L4PER2_MCASP6_CLKCTRL 28>;
clock-names = "fck", "ahclkx", "ahclkr";
<&l4per2_clkctrl DRA7_L4PER2_MCASP6_CLKCTRL 24>;
clock-names = "fck", "ahclkx";
#address-cells = <1>;
#size-cells = <1>;
ranges = <0x0 0x74000 0x2000>,
@ -2909,7 +2905,7 @@
interrupt-names = "tx", "rx";
dmas = <&edma_xbar 139 1>, <&edma_xbar 138 1>;
dma-names = "tx", "rx";
clocks = <&l4per2_clkctrl DRA7_L4PER2_MCASP6_CLKCTRL 22>,
clocks = <&l4per2_clkctrl DRA7_L4PER2_MCASP6_CLKCTRL 0>,
<&l4per2_clkctrl DRA7_L4PER2_MCASP6_CLKCTRL 24>;
clock-names = "fck", "ahclkx";
status = "disabled";
@ -2926,9 +2922,8 @@
<SYSC_IDLE_SMART>;
/* Domains (P, C): l4per_pwrdm, l4per2_clkdm */
clocks = <&l4per2_clkctrl DRA7_L4PER2_MCASP7_CLKCTRL 0>,
<&l4per2_clkctrl DRA7_L4PER2_MCASP7_CLKCTRL 24>,
<&l4per2_clkctrl DRA7_L4PER2_MCASP7_CLKCTRL 28>;
clock-names = "fck", "ahclkx", "ahclkr";
<&l4per2_clkctrl DRA7_L4PER2_MCASP7_CLKCTRL 24>;
clock-names = "fck", "ahclkx";
#address-cells = <1>;
#size-cells = <1>;
ranges = <0x0 0x78000 0x2000>,
@ -2944,7 +2939,7 @@
interrupt-names = "tx", "rx";
dmas = <&edma_xbar 141 1>, <&edma_xbar 140 1>;
dma-names = "tx", "rx";
clocks = <&l4per2_clkctrl DRA7_L4PER2_MCASP7_CLKCTRL 22>,
clocks = <&l4per2_clkctrl DRA7_L4PER2_MCASP7_CLKCTRL 0>,
<&l4per2_clkctrl DRA7_L4PER2_MCASP7_CLKCTRL 24>;
clock-names = "fck", "ahclkx";
status = "disabled";
@ -2961,9 +2956,8 @@
<SYSC_IDLE_SMART>;
/* Domains (P, C): l4per_pwrdm, l4per2_clkdm */
clocks = <&l4per2_clkctrl DRA7_L4PER2_MCASP8_CLKCTRL 0>,
<&l4per2_clkctrl DRA7_L4PER2_MCASP8_CLKCTRL 24>,
<&l4per2_clkctrl DRA7_L4PER2_MCASP8_CLKCTRL 28>;
clock-names = "fck", "ahclkx", "ahclkr";
<&l4per2_clkctrl DRA7_L4PER2_MCASP8_CLKCTRL 24>;
clock-names = "fck", "ahclkx";
#address-cells = <1>;
#size-cells = <1>;
ranges = <0x0 0x7c000 0x2000>,
@ -2979,7 +2973,7 @@
interrupt-names = "tx", "rx";
dmas = <&edma_xbar 143 1>, <&edma_xbar 142 1>;
dma-names = "tx", "rx";
clocks = <&l4per2_clkctrl DRA7_L4PER2_MCASP8_CLKCTRL 22>,
clocks = <&l4per2_clkctrl DRA7_L4PER2_MCASP8_CLKCTRL 0>,
<&l4per2_clkctrl DRA7_L4PER2_MCASP8_CLKCTRL 24>;
clock-names = "fck", "ahclkx";
status = "disabled";

1
arch/arm/boot/dts/omap3-gta04.dtsi
View File

@ -124,6 +124,7 @@
spi-max-frequency = <100000>;
spi-cpol;
spi-cpha;
spi-cs-high;
backlight= <&backlight>;
label = "lcd";

11
arch/arm/boot/dts/ste-dbx5x0.dtsi
View File

@ -8,6 +8,7 @@
#include <dt-bindings/mfd/dbx500-prcmu.h>
#include <dt-bindings/arm/ux500_pm_domains.h>
#include <dt-bindings/gpio/gpio.h>
#include <dt-bindings/thermal/thermal.h>
/ {
#address-cells = <1>;
@ -59,8 +60,12 @@
* cooling.
*/
cpu_thermal: cpu-thermal {
polling-delay-passive = <0>;
polling-delay = <1000>;
polling-delay-passive = <250>;
/*
* This sensor fires interrupts to update the thermal
* zone, so no polling is needed.
*/
polling-delay = <0>;
thermal-sensors = <&thermal>;
@ -79,7 +84,7 @@
cooling-maps {
trip = <&cpu_alert>;
cooling-device = <&CPU0 0 2>;
cooling-device = <&CPU0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
contribution = <100>;
};
};

4
arch/arm/boot/dts/sun4i-a10.dtsi
View File

@ -520,6 +520,7 @@
interrupts = <39>;
clocks = <&ccu CLK_AHB_EHCI0>;
phys = <&usbphy 1>;
phy-names = "usb";
status = "disabled";
};
@ -529,6 +530,7 @@
interrupts = <64>;
clocks = <&ccu CLK_USB_OHCI0>, <&ccu CLK_AHB_OHCI0>;
phys = <&usbphy 1>;
phy-names = "usb";
status = "disabled";
};
@ -608,6 +610,7 @@
interrupts = <40>;
clocks = <&ccu CLK_AHB_EHCI1>;
phys = <&usbphy 2>;
phy-names = "usb";
status = "disabled";
};
@ -617,6 +620,7 @@
interrupts = <65>;
clocks = <&ccu CLK_USB_OHCI1>, <&ccu CLK_AHB_OHCI1>;
phys = <&usbphy 2>;
phy-names = "usb";
status = "disabled";
};

2
arch/arm/boot/dts/sun5i.dtsi
View File

@ -391,6 +391,7 @@
interrupts = <39>;
clocks = <&ccu CLK_AHB_EHCI>;
phys = <&usbphy 1>;
phy-names = "usb";
status = "disabled";
};
@ -400,6 +401,7 @@
interrupts = <40>;
clocks = <&ccu CLK_USB_OHCI>, <&ccu CLK_AHB_OHCI>;
phys = <&usbphy 1>;
phy-names = "usb";
status = "disabled";
};

4
arch/arm/boot/dts/sun6i-a31.dtsi
View File

@ -545,6 +545,7 @@
clocks = <&ccu CLK_AHB1_EHCI0>;
resets = <&ccu RST_AHB1_EHCI0>;
phys = <&usbphy 1>;
phy-names = "usb";
status = "disabled";
};
@ -555,6 +556,7 @@
clocks = <&ccu CLK_AHB1_OHCI0>, <&ccu CLK_USB_OHCI0>;
resets = <&ccu RST_AHB1_OHCI0>;
phys = <&usbphy 1>;
phy-names = "usb";
status = "disabled";
};
@ -565,6 +567,7 @@
clocks = <&ccu CLK_AHB1_EHCI1>;
resets = <&ccu RST_AHB1_EHCI1>;
phys = <&usbphy 2>;
phy-names = "usb";
status = "disabled";
};
@ -575,6 +578,7 @@
clocks = <&ccu CLK_AHB1_OHCI1>, <&ccu CLK_USB_OHCI1>;
resets = <&ccu RST_AHB1_OHCI1>;
phys = <&usbphy 2>;
phy-names = "usb";
status = "disabled";
};

4
arch/arm/boot/dts/sun7i-a20.dtsi
View File

@ -623,6 +623,7 @@
interrupts = <GIC_SPI 39 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&ccu CLK_AHB_EHCI0>;
phys = <&usbphy 1>;
phy-names = "usb";
status = "disabled";
};
@ -632,6 +633,7 @@
interrupts = <GIC_SPI 64 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&ccu CLK_USB_OHCI0>, <&ccu CLK_AHB_OHCI0>;
phys = <&usbphy 1>;
phy-names = "usb";
status = "disabled";
};
@ -714,6 +716,7 @@
interrupts = <GIC_SPI 40 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&ccu CLK_AHB_EHCI1>;
phys = <&usbphy 2>;
phy-names = "usb";
status = "disabled";
};
@ -723,6 +726,7 @@
interrupts = <GIC_SPI 65 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&ccu CLK_USB_OHCI1>, <&ccu CLK_AHB_OHCI1>;
phys = <&usbphy 2>;
phy-names = "usb";
status = "disabled";
};

2
arch/arm/boot/dts/sun8i-a23-a33.dtsi
View File

@ -307,6 +307,7 @@
clocks = <&ccu CLK_BUS_EHCI>;
resets = <&ccu RST_BUS_EHCI>;
phys = <&usbphy 1>;
phy-names = "usb";
status = "disabled";
};
@ -317,6 +318,7 @@
clocks = <&ccu CLK_BUS_OHCI>, <&ccu CLK_USB_OHCI>;
resets = <&ccu RST_BUS_OHCI>;
phys = <&usbphy 1>;
phy-names = "usb";
status = "disabled";
};

3
arch/arm/boot/dts/sun8i-a83t.dtsi
View File

@ -632,6 +632,7 @@
clocks = <&ccu CLK_BUS_EHCI0>;
resets = <&ccu RST_BUS_EHCI0>;
phys = <&usbphy 1>;
phy-names = "usb";
status = "disabled";
};
@ -643,6 +644,7 @@
clocks = <&ccu CLK_BUS_OHCI0>, <&ccu CLK_USB_OHCI0>;
resets = <&ccu RST_BUS_OHCI0>;
phys = <&usbphy 1>;
phy-names = "usb";
status = "disabled";
};
@ -654,6 +656,7 @@
clocks = <&ccu CLK_BUS_EHCI1>;
resets = <&ccu RST_BUS_EHCI1>;
phys = <&usbphy 2>;
phy-names = "usb";
status = "disabled";
};

4
arch/arm/boot/dts/sun8i-r40.dtsi
View File

@ -273,6 +273,7 @@
clocks = <&ccu CLK_BUS_EHCI1>;
resets = <&ccu RST_BUS_EHCI1>;
phys = <&usbphy 1>;
phy-names = "usb";
status = "disabled";
};
@ -284,6 +285,7 @@
<&ccu CLK_USB_OHCI1>;
resets = <&ccu RST_BUS_OHCI1>;
phys = <&usbphy 1>;
phy-names = "usb";
status = "disabled";
};
@ -294,6 +296,7 @@
clocks = <&ccu CLK_BUS_EHCI2>;
resets = <&ccu RST_BUS_EHCI2>;
phys = <&usbphy 2>;
phy-names = "usb";
status = "disabled";
};
@ -305,6 +308,7 @@
<&ccu CLK_USB_OHCI2>;
resets = <&ccu RST_BUS_OHCI2>;
phys = <&usbphy 2>;
phy-names = "usb";
status = "disabled";
};

5
arch/arm/boot/dts/sun9i-a80.dtsi
View File

@ -346,6 +346,7 @@
clocks = <&usb_clocks CLK_BUS_HCI0>;
resets = <&usb_clocks RST_USB0_HCI>;
phys = <&usbphy1>;
phy-names = "usb";
status = "disabled";
};
@ -357,6 +358,7 @@
<&usb_clocks CLK_USB_OHCI0>;
resets = <&usb_clocks RST_USB0_HCI>;
phys = <&usbphy1>;
phy-names = "usb";
status = "disabled";
};
@ -378,6 +380,7 @@
clocks = <&usb_clocks CLK_BUS_HCI1>;
resets = <&usb_clocks RST_USB1_HCI>;
phys = <&usbphy2>;
phy-names = "usb";
status = "disabled";
};
@ -407,6 +410,7 @@
clocks = <&usb_clocks CLK_BUS_HCI2>;
resets = <&usb_clocks RST_USB2_HCI>;
phys = <&usbphy3>;
phy-names = "usb";
status = "disabled";
};
@ -418,6 +422,7 @@
<&usb_clocks CLK_USB_OHCI2>;
resets = <&usb_clocks RST_USB2_HCI>;
phys = <&usbphy3>;
phy-names = "usb";
status = "disabled";
};

6
arch/arm/boot/dts/sunxi-h3-h5.dtsi
View File

@ -304,6 +304,7 @@
clocks = <&ccu CLK_BUS_EHCI1>, <&ccu CLK_BUS_OHCI1>;
resets = <&ccu RST_BUS_EHCI1>, <&ccu RST_BUS_OHCI1>;
phys = <&usbphy 1>;
phy-names = "usb";
status = "disabled";
};
@ -315,6 +316,7 @@
<&ccu CLK_USB_OHCI1>;
resets = <&ccu RST_BUS_EHCI1>, <&ccu RST_BUS_OHCI1>;
phys = <&usbphy 1>;
phy-names = "usb";
status = "disabled";
};
@ -325,6 +327,7 @@
clocks = <&ccu CLK_BUS_EHCI2>, <&ccu CLK_BUS_OHCI2>;
resets = <&ccu RST_BUS_EHCI2>, <&ccu RST_BUS_OHCI2>;
phys = <&usbphy 2>;
phy-names = "usb";
status = "disabled";
};
@ -336,6 +339,7 @@
<&ccu CLK_USB_OHCI2>;
resets = <&ccu RST_BUS_EHCI2>, <&ccu RST_BUS_OHCI2>;
phys = <&usbphy 2>;
phy-names = "usb";
status = "disabled";
};
@ -346,6 +350,7 @@
clocks = <&ccu CLK_BUS_EHCI3>, <&ccu CLK_BUS_OHCI3>;
resets = <&ccu RST_BUS_EHCI3>, <&ccu RST_BUS_OHCI3>;
phys = <&usbphy 3>;
phy-names = "usb";
status = "disabled";
};
@ -357,6 +362,7 @@
<&ccu CLK_USB_OHCI3>;
resets = <&ccu RST_BUS_EHCI3>, <&ccu RST_BUS_OHCI3>;
phys = <&usbphy 3>;
phy-names = "usb";
status = "disabled";
};

1
arch/arm/configs/badge4_defconfig
View File

@ -91,7 +91,6 @@ CONFIG_USB_SERIAL_PL2303=m
CONFIG_USB_SERIAL_CYBERJACK=m
CONFIG_USB_SERIAL_XIRCOM=m
CONFIG_USB_SERIAL_OMNINET=m
CONFIG_USB_RIO500=m
CONFIG_EXT2_FS=m
CONFIG_EXT3_FS=m
CONFIG_MSDOS_FS=y

1
arch/arm/configs/corgi_defconfig
View File

@ -195,7 +195,6 @@ CONFIG_USB_SERIAL_XIRCOM=m
CONFIG_USB_SERIAL_OMNINET=m
CONFIG_USB_EMI62=m
CONFIG_USB_EMI26=m
CONFIG_USB_RIO500=m
CONFIG_USB_LEGOTOWER=m
CONFIG_USB_LCD=m
CONFIG_USB_CYTHERM=m

2
arch/arm/configs/davinci_all_defconfig
View File

@ -228,7 +228,7 @@ CONFIG_RTC_DRV_OMAP=m
CONFIG_DMADEVICES=y
CONFIG_TI_EDMA=y
CONFIG_COMMON_CLK_PWM=m
CONFIG_REMOTEPROC=m
CONFIG_REMOTEPROC=y
CONFIG_DA8XX_REMOTEPROC=m
CONFIG_MEMORY=y
CONFIG_TI_AEMIF=m

4
arch/arm/configs/multi_v7_defconfig
View File

@ -415,7 +415,7 @@ CONFIG_SPI_SH_MSIOF=m
CONFIG_SPI_SH_HSPI=y
CONFIG_SPI_SIRF=y
CONFIG_SPI_STM32=m
CONFIG_SPI_STM32_QSPI=m
CONFIG_SPI_STM32_QSPI=y
CONFIG_SPI_SUN4I=y
CONFIG_SPI_SUN6I=y
CONFIG_SPI_TEGRA114=y
@ -933,7 +933,7 @@ CONFIG_BCM2835_MBOX=y
CONFIG_ROCKCHIP_IOMMU=y
CONFIG_TEGRA_IOMMU_GART=y
CONFIG_TEGRA_IOMMU_SMMU=y
CONFIG_REMOTEPROC=m
CONFIG_REMOTEPROC=y
CONFIG_ST_REMOTEPROC=m
CONFIG_RPMSG_VIRTIO=m
CONFIG_ASPEED_LPC_CTRL=m

5
arch/arm/configs/omap2plus_defconfig
View File

@ -364,6 +364,7 @@ CONFIG_DRM_OMAP_PANEL_TPO_TD043MTEA1=m
CONFIG_DRM_OMAP_PANEL_NEC_NL8048HL11=m
CONFIG_DRM_TILCDC=m
CONFIG_DRM_PANEL_SIMPLE=m
CONFIG_DRM_TI_TFP410=m
CONFIG_FB=y
CONFIG_FIRMWARE_EDID=y
CONFIG_FB_MODE_HELPERS=y
@ -423,6 +424,7 @@ CONFIG_USB_SERIAL_GENERIC=y
CONFIG_USB_SERIAL_SIMPLE=m
CONFIG_USB_SERIAL_FTDI_SIO=m
CONFIG_USB_SERIAL_PL2303=m
CONFIG_USB_SERIAL_OPTION=m
CONFIG_USB_TEST=m
CONFIG_NOP_USB_XCEIV=m
CONFIG_AM335X_PHY_USB=m
@ -460,6 +462,7 @@ CONFIG_MMC_SDHCI_OMAP=y
CONFIG_NEW_LEDS=y
CONFIG_LEDS_CLASS=m
CONFIG_LEDS_CPCAP=m
CONFIG_LEDS_LM3532=m
CONFIG_LEDS_GPIO=m
CONFIG_LEDS_PCA963X=m
CONFIG_LEDS_PWM=m
@ -481,7 +484,7 @@ CONFIG_RTC_DRV_OMAP=m
CONFIG_RTC_DRV_CPCAP=m
CONFIG_DMADEVICES=y
CONFIG_OMAP_IOMMU=y
CONFIG_REMOTEPROC=m
CONFIG_REMOTEPROC=y
CONFIG_OMAP_REMOTEPROC=m
CONFIG_WKUP_M3_RPROC=m
CONFIG_SOC_TI=y

1
arch/arm/configs/pxa_defconfig
View File

@ -581,7 +581,6 @@ CONFIG_USB_SERIAL_XIRCOM=m
CONFIG_USB_SERIAL_OMNINET=m
CONFIG_USB_EMI62=m
CONFIG_USB_EMI26=m
CONFIG_USB_RIO500=m
CONFIG_USB_LEGOTOWER=m
CONFIG_USB_LCD=m
CONFIG_USB_CYTHERM=m

1
arch/arm/configs/s3c2410_defconfig
View File

@ -327,7 +327,6 @@ CONFIG_USB_EMI62=m
CONFIG_USB_EMI26=m
CONFIG_USB_ADUTUX=m
CONFIG_USB_SEVSEG=m
CONFIG_USB_RIO500=m
CONFIG_USB_LEGOTOWER=m
CONFIG_USB_LCD=m
CONFIG_USB_CYPRESS_CY7C63=m

1
arch/arm/configs/spitz_defconfig
View File

@ -189,7 +189,6 @@ CONFIG_USB_SERIAL_XIRCOM=m
CONFIG_USB_SERIAL_OMNINET=m
CONFIG_USB_EMI62=m
CONFIG_USB_EMI26=m
CONFIG_USB_RIO500=m
CONFIG_USB_LEGOTOWER=m
CONFIG_USB_LCD=m
CONFIG_USB_CYTHERM=m

1
arch/arm/crypto/Kconfig
View File

@ -98,6 +98,7 @@ config CRYPTO_AES_ARM_CE
tristate "Accelerated AES using ARMv8 Crypto Extensions"
depends on KERNEL_MODE_NEON
select CRYPTO_BLKCIPHER
select CRYPTO_LIB_AES
select CRYPTO_SIMD
help
Use an implementation of AES in CBC, CTR and XTS modes that uses

1
arch/arm/crypto/aes-ce-core.S
View File

@ -9,6 +9,7 @@
#include <asm/assembler.h>
.text
.arch armv8-a
.fpu crypto-neon-fp-armv8
.align 3

6
arch/arm/include/asm/xen/xen-ops.h
View File

@ -1,6 +0,0 @@
#ifndef _ASM_XEN_OPS_H
#define _ASM_XEN_OPS_H
void xen_efi_runtime_setup(void);
#endif /* _ASM_XEN_OPS_H */

3
arch/arm/mach-omap2/omap_hwmod_33xx_43xx_ipblock_data.c
View File

@ -763,7 +763,8 @@ static struct omap_hwmod_class_sysconfig am33xx_timer_sysc = {
.rev_offs = 0x0000,
.sysc_offs = 0x0010,
.syss_offs = 0x0014,
.sysc_flags = (SYSC_HAS_SIDLEMODE | SYSC_HAS_SOFTRESET),
.sysc_flags = SYSC_HAS_SIDLEMODE | SYSC_HAS_SOFTRESET |
SYSC_HAS_RESET_STATUS,
.idlemodes = (SIDLE_FORCE | SIDLE_NO | SIDLE_SMART |
SIDLE_SMART_WKUP),
.sysc_fields = &omap_hwmod_sysc_type2,

5
arch/arm/mach-omap2/omap_hwmod_33xx_data.c
View File

@ -231,8 +231,9 @@ static struct omap_hwmod am33xx_control_hwmod = {
static struct omap_hwmod_class_sysconfig lcdc_sysc = {
.rev_offs = 0x0,
.sysc_offs = 0x54,
.sysc_flags = (SYSC_HAS_SIDLEMODE | SYSC_HAS_MIDLEMODE),
.idlemodes = (SIDLE_FORCE | SIDLE_NO | SIDLE_SMART),
.sysc_flags = SYSC_HAS_SIDLEMODE | SYSC_HAS_MIDLEMODE,
.idlemodes = SIDLE_FORCE | SIDLE_NO | SIDLE_SMART |
MSTANDBY_FORCE | MSTANDBY_NO | MSTANDBY_SMART,
.sysc_fields = &omap_hwmod_sysc_type2,
};

100
arch/arm/mach-omap2/pm.c
View File

@ -74,83 +74,6 @@ int omap_pm_clkdms_setup(struct clockdomain *clkdm, void *unused)
return 0;
}
/*
* This API is to be called during init to set the various voltage
* domains to the voltage as per the opp table. Typically we boot up
* at the nominal voltage. So this function finds out the rate of
* the clock associated with the voltage domain, finds out the correct
* opp entry and sets the voltage domain to the voltage specified
* in the opp entry
*/
static int __init omap2_set_init_voltage(char *vdd_name, char *clk_name,
const char *oh_name)
{
struct voltagedomain *voltdm;
struct clk *clk;
struct dev_pm_opp *opp;
unsigned long freq, bootup_volt;
struct device *dev;
if (!vdd_name || !clk_name || !oh_name) {
pr_err("%s: invalid parameters\n", __func__);
goto exit;
}
if (!strncmp(oh_name, "mpu", 3))
/*
* All current OMAPs share voltage rail and clock
* source, so CPU0 is used to represent the MPU-SS.
*/
dev = get_cpu_device(0);
else
dev = omap_device_get_by_hwmod_name(oh_name);
if (IS_ERR(dev)) {
pr_err("%s: Unable to get dev pointer for hwmod %s\n",
__func__, oh_name);
goto exit;
}
voltdm = voltdm_lookup(vdd_name);
if (!voltdm) {
pr_err("%s: unable to get vdd pointer for vdd_%s\n",
__func__, vdd_name);
goto exit;
}
clk = clk_get(NULL, clk_name);
if (IS_ERR(clk)) {
pr_err("%s: unable to get clk %s\n", __func__, clk_name);
goto exit;
}
freq = clk_get_rate(clk);
clk_put(clk);
opp = dev_pm_opp_find_freq_ceil(dev, &freq);
if (IS_ERR(opp)) {
pr_err("%s: unable to find boot up OPP for vdd_%s\n",
__func__, vdd_name);
goto exit;
}
bootup_volt = dev_pm_opp_get_voltage(opp);
dev_pm_opp_put(opp);
if (!bootup_volt) {
pr_err("%s: unable to find voltage corresponding to the bootup OPP for vdd_%s\n",
__func__, vdd_name);
goto exit;
}
voltdm_scale(voltdm, bootup_volt);
return 0;
exit:
pr_err("%s: unable to set vdd_%s\n", __func__, vdd_name);
return -EINVAL;
}
#ifdef CONFIG_SUSPEND
static int omap_pm_enter(suspend_state_t suspend_state)
{
@ -208,25 +131,6 @@ void omap_common_suspend_init(void *pm_suspend)
}
#endif /* CONFIG_SUSPEND */
static void __init omap3_init_voltages(void)
{
if (!soc_is_omap34xx())
return;
omap2_set_init_voltage("mpu_iva", "dpll1_ck", "mpu");
omap2_set_init_voltage("core", "l3_ick", "l3_main");
}
static void __init omap4_init_voltages(void)
{
if (!soc_is_omap44xx())
return;
omap2_set_init_voltage("mpu", "dpll_mpu_ck", "mpu");
omap2_set_init_voltage("core", "l3_div_ck", "l3_main_1");
omap2_set_init_voltage("iva", "dpll_iva_m5x2_ck", "iva");
}
int __maybe_unused omap_pm_nop_init(void)
{
return 0;
@ -246,10 +150,6 @@ int __init omap2_common_pm_late_init(void)
omap4_twl_init();
omap_voltage_late_init();
/* Initialize the voltages */
omap3_init_voltages();
omap4_init_voltages();
/* Smartreflex device init */
omap_devinit_smartreflex();

1
arch/arm/xen/Makefile
View File

@ -1,3 +1,2 @@
# SPDX-License-Identifier: GPL-2.0-only
obj-y := enlighten.o hypercall.o grant-table.o p2m.o mm.o
obj-$(CONFIG_XEN_EFI) += efi.o

28
arch/arm/xen/efi.c
View File

@ -1,28 +0,0 @@
// SPDX-License-Identifier: GPL-2.0-or-later
/*
* Copyright (c) 2015, Linaro Limited, Shannon Zhao
*/
#include <linux/efi.h>
#include <xen/xen-ops.h>
#include <asm/xen/xen-ops.h>
/* Set XEN EFI runtime services function pointers. Other fields of struct efi,
* e.g. efi.systab, will be set like normal EFI.
*/
void __init xen_efi_runtime_setup(void)
{
efi.get_time = xen_efi_get_time;
efi.set_time = xen_efi_set_time;
efi.get_wakeup_time = xen_efi_get_wakeup_time;
efi.set_wakeup_time = xen_efi_set_wakeup_time;
efi.get_variable = xen_efi_get_variable;
efi.get_next_variable = xen_efi_get_next_variable;
efi.set_variable = xen_efi_set_variable;
efi.query_variable_info = xen_efi_query_variable_info;
efi.update_capsule = xen_efi_update_capsule;
efi.query_capsule_caps = xen_efi_query_capsule_caps;
efi.get_next_high_mono_count = xen_efi_get_next_high_mono_count;
efi.reset_system = xen_efi_reset_system;
}
EXPORT_SYMBOL_GPL(xen_efi_runtime_setup);

3
arch/arm/xen/enlighten.c
View File

@ -15,7 +15,6 @@
#include <xen/xen-ops.h>
#include <asm/xen/hypervisor.h>
#include <asm/xen/hypercall.h>
#include <asm/xen/xen-ops.h>
#include <asm/system_misc.h>
#include <asm/efi.h>
#include <linux/interrupt.h>
@ -437,7 +436,7 @@ EXPORT_SYMBOL_GPL(HYPERVISOR_memory_op);
EXPORT_SYMBOL_GPL(HYPERVISOR_physdev_op);
EXPORT_SYMBOL_GPL(HYPERVISOR_vcpu_op);
EXPORT_SYMBOL_GPL(HYPERVISOR_tmem_op);
EXPORT_SYMBOL_GPL(HYPERVISOR_platform_op);
EXPORT_SYMBOL_GPL(HYPERVISOR_platform_op_raw);
EXPORT_SYMBOL_GPL(HYPERVISOR_multicall);
EXPORT_SYMBOL_GPL(HYPERVISOR_vm_assist);
EXPORT_SYMBOL_GPL(HYPERVISOR_dm_op);

3
arch/arm/xen/mm.c
View File

@ -28,6 +28,9 @@ unsigned long xen_get_swiotlb_free_pages(unsigned int order)
for_each_memblock(memory, reg) {
if (reg->base < (phys_addr_t)0xffffffff) {
if (IS_ENABLED(CONFIG_ZONE_DMA32))
flags |= __GFP_DMA32;
else
flags |= __GFP_DMA;
break;
}

15
arch/arm64/Kconfig
View File

@ -110,7 +110,6 @@ config ARM64
select GENERIC_STRNLEN_USER
select GENERIC_TIME_VSYSCALL
select GENERIC_GETTIMEOFDAY
select GENERIC_COMPAT_VDSO if (!CPU_BIG_ENDIAN && COMPAT)
select HANDLE_DOMAIN_IRQ
select HARDIRQS_SW_RESEND
select HAVE_PCI
@ -1159,7 +1158,7 @@ menuconfig COMPAT
if COMPAT
config KUSER_HELPERS
bool "Enable kuser helpers page for 32 bit applications"
bool "Enable kuser helpers page for 32-bit applications"
default y
help
Warning: disabling this option may break 32-bit user programs.
@ -1185,6 +1184,18 @@ config KUSER_HELPERS
Say N here only if you are absolutely certain that you do not
need these helpers; otherwise, the safe option is to say Y.
config COMPAT_VDSO
bool "Enable vDSO for 32-bit applications"
depends on !CPU_BIG_ENDIAN && "$(CROSS_COMPILE_COMPAT)" != ""
select GENERIC_COMPAT_VDSO
default y
help
Place in the process address space of 32-bit applications an
ELF shared object providing fast implementations of gettimeofday
and clock_gettime.
You must have a 32-bit build of glibc 2.22 or later for programs
to seamlessly take advantage of this.
menuconfig ARMV8_DEPRECATED
bool "Emulate deprecated/obsolete ARMv8 instructions"

16
arch/arm64/Makefile
View File

@ -53,22 +53,6 @@ $(warning Detected assembler with broken .inst; disassembly will be unreliable)
endif
endif
ifeq ($(CONFIG_GENERIC_COMPAT_VDSO), y)
CROSS_COMPILE_COMPAT ?= $(CONFIG_CROSS_COMPILE_COMPAT_VDSO:"%"=%)
ifeq ($(CONFIG_CC_IS_CLANG), y)
$(warning CROSS_COMPILE_COMPAT is clang, the compat vDSO will not be built)
else ifeq ($(strip $(CROSS_COMPILE_COMPAT)),)
$(warning CROSS_COMPILE_COMPAT not defined or empty, the compat vDSO will not be built)
else ifeq ($(shell which $(CROSS_COMPILE_COMPAT)gcc 2> /dev/null),)
$(error $(CROSS_COMPILE_COMPAT)gcc not found, check CROSS_COMPILE_COMPAT)
else
export CROSS_COMPILE_COMPAT
export CONFIG_COMPAT_VDSO := y
compat_vdso := -DCONFIG_COMPAT_VDSO=1
endif
endif
KBUILD_CFLAGS += -mgeneral-regs-only $(lseinstr) $(brokengasinst) \
$(compat_vdso) $(cc_has_k_constraint)
KBUILD_CFLAGS += -fno-asynchronous-unwind-tables

2
arch/arm64/boot/dts/allwinner/sun50i-a64-pinebook.dts
View File

@ -104,6 +104,7 @@
&ehci0 {
phys = <&usbphy 0>;
phy-names = "usb";
status = "okay";
};
@ -150,6 +151,7 @@
&ohci0 {
phys = <&usbphy 0>;
phy-names = "usb";
status = "okay";
};

2
arch/arm64/boot/dts/allwinner/sun50i-a64.dtsi
View File

@ -553,6 +553,7 @@
resets = <&ccu RST_BUS_OHCI1>,
<&ccu RST_BUS_EHCI1>;
phys = <&usbphy 1>;
phy-names = "usb";
status = "disabled";
};
@ -564,6 +565,7 @@
<&ccu CLK_USB_OHCI1>;
resets = <&ccu RST_BUS_OHCI1>;
phys = <&usbphy 1>;
phy-names = "usb";
status = "disabled";
};

2
arch/arm64/boot/dts/allwinner/sun50i-h6.dtsi
View File

@ -547,6 +547,7 @@
resets = <&ccu RST_BUS_OHCI3>,
<&ccu RST_BUS_EHCI3>;
phys = <&usb2phy 3>;
phy-names = "usb";
status = "disabled";
};
@ -558,6 +559,7 @@
<&ccu CLK_USB_OHCI3>;
resets = <&ccu RST_BUS_OHCI3>;
phys = <&usb2phy 3>;
phy-names = "usb";
status = "disabled";
};

2
arch/arm64/configs/defconfig
View File

@ -723,7 +723,7 @@ CONFIG_TEGRA_IOMMU_SMMU=y
CONFIG_ARM_SMMU=y
CONFIG_ARM_SMMU_V3=y
CONFIG_QCOM_IOMMU=y
CONFIG_REMOTEPROC=m
CONFIG_REMOTEPROC=y
CONFIG_QCOM_Q6V5_MSS=m
CONFIG_QCOM_Q6V5_PAS=m
CONFIG_QCOM_SYSMON=m

6
arch/arm64/include/asm/atomic_lse.h
View File

@ -321,7 +321,8 @@ static inline s64 __lse_atomic64_dec_if_positive(atomic64_t *v)
}
#define __CMPXCHG_CASE(w, sfx, name, sz, mb, cl...) \
static inline u##sz __lse__cmpxchg_case_##name##sz(volatile void *ptr, \
static __always_inline u##sz \
__lse__cmpxchg_case_##name##sz(volatile void *ptr, \
u##sz old, \
u##sz new) \
{ \
@ -362,7 +363,8 @@ __CMPXCHG_CASE(x, , mb_, 64, al, "memory")
#undef __CMPXCHG_CASE
#define __CMPXCHG_DBL(name, mb, cl...) \
static inline long __lse__cmpxchg_double##name(unsigned long old1, \
static __always_inline long \
__lse__cmpxchg_double##name(unsigned long old1, \
unsigned long old2, \
unsigned long new1, \
unsigned long new2, \

24
arch/arm64/include/asm/kvm_hyp.h
View File

@ -47,30 +47,6 @@
#define read_sysreg_el2(r) read_sysreg_elx(r, _EL2, _EL1)
#define write_sysreg_el2(v,r) write_sysreg_elx(v, r, _EL2, _EL1)
/**
* hyp_alternate_select - Generates patchable code sequences that are
* used to switch between two implementations of a function, depending
* on the availability of a feature.
*
* @fname: a symbol name that will be defined as a function returning a
* function pointer whose type will match @orig and @alt
* @orig: A pointer to the default function, as returned by @fname when
* @cond doesn't hold
* @alt: A pointer to the alternate function, as returned by @fname
* when @cond holds
* @cond: a CPU feature (as described in asm/cpufeature.h)
*/
#define hyp_alternate_select(fname, orig, alt, cond) \
typeof(orig) * __hyp_text fname(void) \
{ \
typeof(alt) *val = orig; \
asm volatile(ALTERNATIVE("nop \n", \
"mov %0, %1 \n", \
cond) \
: "+r" (val) : "r" (alt)); \
return val; \
}
int __vgic_v2_perform_cpuif_access(struct kvm_vcpu *vcpu);
void __vgic_v3_save_state(struct kvm_vcpu *vcpu);

2
arch/arm64/include/asm/vdso/compat_barrier.h
View File

@ -20,7 +20,7 @@
#define dmb(option) __asm__ __volatile__ ("dmb " #option : : : "memory")
#if __LINUX_ARM_ARCH__ >= 8
#if __LINUX_ARM_ARCH__ >= 8 && defined(CONFIG_AS_DMB_ISHLD)
#define aarch32_smp_mb() dmb(ish)
#define aarch32_smp_rmb() dmb(ishld)
#define aarch32_smp_wmb() dmb(ishst)

33
arch/arm64/include/asm/vdso_datapage.h
View File

@ -1,33 +0,0 @@
/* SPDX-License-Identifier: GPL-2.0-only */
/*
* Copyright (C) 2012 ARM Limited
*/
#ifndef __ASM_VDSO_DATAPAGE_H
#define __ASM_VDSO_DATAPAGE_H
#ifndef __ASSEMBLY__
struct vdso_data {
__u64 cs_cycle_last; /* Timebase at clocksource init */
__u64 raw_time_sec; /* Raw time */
__u64 raw_time_nsec;
__u64 xtime_clock_sec; /* Kernel time */
__u64 xtime_clock_nsec;
__u64 xtime_coarse_sec; /* Coarse time */
__u64 xtime_coarse_nsec;
__u64 wtm_clock_sec; /* Wall to monotonic time */
__u64 wtm_clock_nsec;
__u32 tb_seq_count; /* Timebase sequence counter */
/* cs_* members must be adjacent and in this order (ldp accesses) */
__u32 cs_mono_mult; /* NTP-adjusted clocksource multiplier */
__u32 cs_shift; /* Clocksource shift (mono = raw) */
__u32 cs_raw_mult; /* Raw clocksource multiplier */
__u32 tz_minuteswest; /* Whacky timezone stuff */
__u32 tz_dsttime;
__u32 use_syscall;
__u32 hrtimer_res;
};
#endif /* !__ASSEMBLY__ */
#endif /* __ASM_VDSO_DATAPAGE_H */

7
arch/arm64/include/asm/xen/xen-ops.h
View File

@ -1,7 +0,0 @@
/* SPDX-License-Identifier: GPL-2.0 */
#ifndef _ASM_XEN_OPS_H
#define _ASM_XEN_OPS_H
void xen_efi_runtime_setup(void);
#endif /* _ASM_XEN_OPS_H */

5
arch/arm64/kernel/armv8_deprecated.c
View File

@ -174,6 +174,9 @@ static void __init register_insn_emulation(struct insn_emulation_ops *ops)
struct insn_emulation *insn;
insn = kzalloc(sizeof(*insn), GFP_KERNEL);
if (!insn)
return;
insn->ops = ops;
insn->min = INSN_UNDEF;
@ -233,6 +236,8 @@ static void __init register_insn_emulation_sysctl(void)
insns_sysctl = kcalloc(nr_insn_emulated + 1, sizeof(*sysctl),
GFP_KERNEL);
if (!insns_sysctl)
return;
raw_spin_lock_irqsave(&insn_emulation_lock, flags);
list_for_each_entry(insn, &insn_emulation, node) {

4
arch/arm64/kernel/cpu_errata.c
View File

@ -128,8 +128,8 @@ static void install_bp_hardening_cb(bp_hardening_cb_t fn,
int cpu, slot = -1;
/*
* enable_smccc_arch_workaround_1() passes NULL for the hyp_vecs
* start/end if we're a guest. Skip the hyp-vectors work.
* detect_harden_bp_fw() passes NULL for the hyp_vecs start/end if
* we're a guest. Skip the hyp-vectors work.
*/
if (!hyp_vecs_start) {
__this_cpu_write(bp_hardening_data.fn, fn);

1
arch/arm64/kernel/cpufeature.c
View File

@ -136,6 +136,7 @@ static const struct arm64_ftr_bits ftr_id_aa64isar0[] = {
static const struct arm64_ftr_bits ftr_id_aa64isar1[] = {
ARM64_FTR_BITS(FTR_VISIBLE, FTR_STRICT, FTR_LOWER_SAFE, ID_AA64ISAR1_SB_SHIFT, 4, 0),
ARM64_FTR_BITS(FTR_VISIBLE, FTR_STRICT, FTR_LOWER_SAFE, ID_AA64ISAR1_FRINTTS_SHIFT, 4, 0),
ARM64_FTR_BITS(FTR_VISIBLE_IF_IS_ENABLED(CONFIG_ARM64_PTR_AUTH),
FTR_STRICT, FTR_LOWER_SAFE, ID_AA64ISAR1_GPI_SHIFT, 4, 0),
ARM64_FTR_BITS(FTR_VISIBLE_IF_IS_ENABLED(CONFIG_ARM64_PTR_AUTH),

1
arch/arm64/kernel/entry.S
View File

@ -775,6 +775,7 @@ el0_sync_compat:
b.ge el0_dbg
b el0_inv
el0_svc_compat:
gic_prio_kentry_setup tmp=x1
mov x0, sp
bl el0_svc_compat_handler
b ret_to_user

10
arch/arm64/kernel/ftrace.c
View File

@ -121,9 +121,15 @@ int ftrace_make_call(struct dyn_ftrace *rec, unsigned long addr)
/*
* Ensure updated trampoline is visible to instruction
* fetch before we patch in the branch.
* fetch before we patch in the branch. Although the
* architecture doesn't require an IPI in this case,
* Neoverse-N1 erratum #1542419 does require one
* if the TLB maintenance in module_enable_ro() is
* skipped due to rodata_enabled. It doesn't seem worth
* it to make it conditional given that this is
* certainly not a fast-path.
*/
__flush_icache_range((unsigned long)&dst[0],
flush_icache_range((unsigned long)&dst[0],
(unsigned long)&dst[1]);
}
addr = (unsigned long)dst;

32
arch/arm64/kernel/process.c
View File

@ -332,22 +332,27 @@ void arch_release_task_struct(struct task_struct *tsk)
fpsimd_release_task(tsk);
}
/*
* src and dst may temporarily have aliased sve_state after task_struct
* is copied. We cannot fix this properly here, because src may have
* live SVE state and dst's thread_info may not exist yet, so tweaking
* either src's or dst's TIF_SVE is not safe.
*
* The unaliasing is done in copy_thread() instead. This works because
* dst is not schedulable or traceable until both of these functions
* have been called.
*/
int arch_dup_task_struct(struct task_struct *dst, struct task_struct *src)
{
if (current->mm)
fpsimd_preserve_current_state();
*dst = *src;
/* We rely on the above assignment to initialize dst's thread_flags: */
BUILD_BUG_ON(!IS_ENABLED(CONFIG_THREAD_INFO_IN_TASK));
/*
* Detach src's sve_state (if any) from dst so that it does not
* get erroneously used or freed prematurely. dst's sve_state
* will be allocated on demand later on if dst uses SVE.
* For consistency, also clear TIF_SVE here: this could be done
* later in copy_process(), but to avoid tripping up future
* maintainers it is best not to leave TIF_SVE and sve_state in
* an inconsistent state, even temporarily.
*/
dst->thread.sve_state = NULL;
clear_tsk_thread_flag(dst, TIF_SVE);
return 0;
}
@ -360,13 +365,6 @@ int copy_thread(unsigned long clone_flags, unsigned long stack_start,
memset(&p->thread.cpu_context, 0, sizeof(struct cpu_context));
/*
* Unalias p->thread.sve_state (if any) from the parent task
* and disable discard SVE state for p:
*/
clear_tsk_thread_flag(p, TIF_SVE);
p->thread.sve_state = NULL;
/*
* In case p was allocated the same task_struct pointer as some
* other recently-exited task, make sure p is disassociated from

0
arch/arm64/kernel/vdso/gettimeofday.S
View File

44
arch/arm64/kernel/vdso32/Makefile
View File

@ -8,15 +8,21 @@
ARCH_REL_TYPE_ABS := R_ARM_JUMP_SLOT|R_ARM_GLOB_DAT|R_ARM_ABS32
include $(srctree)/lib/vdso/Makefile
COMPATCC := $(CROSS_COMPILE_COMPAT)gcc
# Same as cc-*option, but using CC_COMPAT instead of CC
ifeq ($(CONFIG_CC_IS_CLANG), y)
CC_COMPAT ?= $(CC)
else
CC_COMPAT ?= $(CROSS_COMPILE_COMPAT)gcc
endif
# Same as cc-*option, but using COMPATCC instead of CC
cc32-option = $(call try-run,\
$(COMPATCC) $(1) -c -x c /dev/null -o "$$TMP",$(1),$(2))
$(CC_COMPAT) $(1) -c -x c /dev/null -o "$$TMP",$(1),$(2))
cc32-disable-warning = $(call try-run,\
$(COMPATCC) -W$(strip $(1)) -c -x c /dev/null -o "$$TMP",-Wno-$(strip $(1)))
$(CC_COMPAT) -W$(strip $(1)) -c -x c /dev/null -o "$$TMP",-Wno-$(strip $(1)))
cc32-ldoption = $(call try-run,\
$(COMPATCC) $(1) -nostdlib -x c /dev/null -o "$$TMP",$(1),$(2))
$(CC_COMPAT) $(1) -nostdlib -x c /dev/null -o "$$TMP",$(1),$(2))
cc32-as-instr = $(call try-run,\
printf "%b\n" "$(1)" | $(CC_COMPAT) $(VDSO_AFLAGS) -c -x assembler -o "$$TMP" -,$(2),$(3))
# We cannot use the global flags to compile the vDSO files, the main reason
# being that the 32-bit compiler may be older than the main (64-bit) compiler
@ -25,22 +31,21 @@ cc32-ldoption = $(call try-run,\
# arm64 one.
# As a result we set our own flags here.
# From top-level Makefile
# NOSTDINC_FLAGS
VDSO_CPPFLAGS := -nostdinc -isystem $(shell $(COMPATCC) -print-file-name=include)
# KBUILD_CPPFLAGS and NOSTDINC_FLAGS from top-level Makefile
VDSO_CPPFLAGS := -D__KERNEL__ -nostdinc -isystem $(shell $(CC_COMPAT) -print-file-name=include)
VDSO_CPPFLAGS += $(LINUXINCLUDE)
VDSO_CPPFLAGS += $(KBUILD_CPPFLAGS)
# Common C and assembly flags
# From top-level Makefile
VDSO_CAFLAGS := $(VDSO_CPPFLAGS)
ifneq ($(shell $(CC_COMPAT) --version 2>&1 | head -n 1 | grep clang),)
VDSO_CAFLAGS += --target=$(notdir $(CROSS_COMPILE_COMPAT:%-=%))
endif
VDSO_CAFLAGS += $(call cc32-option,-fno-PIE)
ifdef CONFIG_DEBUG_INFO
VDSO_CAFLAGS += -g
endif
ifeq ($(shell $(CONFIG_SHELL) $(srctree)/scripts/gcc-goto.sh $(COMPATCC)), y)
VDSO_CAFLAGS += -DCC_HAVE_ASM_GOTO
endif
# From arm Makefile
VDSO_CAFLAGS += $(call cc32-option,-fno-dwarf2-cfi-asm)
@ -55,6 +60,7 @@ endif
VDSO_CAFLAGS += -fPIC -fno-builtin -fno-stack-protector
VDSO_CAFLAGS += -DDISABLE_BRANCH_PROFILING
# Try to compile for ARMv8. If the compiler is too old and doesn't support it,
# fall back to v7. There is no easy way to check for what architecture the code
# is being compiled, so define a macro specifying that (see arch/arm/Makefile).
@ -91,6 +97,12 @@ VDSO_CFLAGS += -Wno-int-to-pointer-cast
VDSO_AFLAGS := $(VDSO_CAFLAGS)
VDSO_AFLAGS += -D__ASSEMBLY__
# Check for binutils support for dmb ishld
dmbinstr := $(call cc32-as-instr,dmb ishld,-DCONFIG_AS_DMB_ISHLD=1)
VDSO_CFLAGS += $(dmbinstr)
VDSO_AFLAGS += $(dmbinstr)
VDSO_LDFLAGS := $(VDSO_CPPFLAGS)
# From arm vDSO Makefile
VDSO_LDFLAGS += -Wl,-Bsymbolic -Wl,--no-undefined -Wl,-soname=linux-vdso.so.1
@ -159,14 +171,14 @@ quiet_cmd_vdsold_and_vdso_check = LD32 $@
cmd_vdsold_and_vdso_check = $(cmd_vdsold); $(cmd_vdso_check)
quiet_cmd_vdsold = LD32 $@
cmd_vdsold = $(COMPATCC) -Wp,-MD,$(depfile) $(VDSO_LDFLAGS) \
cmd_vdsold = $(CC_COMPAT) -Wp,-MD,$(depfile) $(VDSO_LDFLAGS) \
-Wl,-T $(filter %.lds,$^) $(filter %.o,$^) -o $@
quiet_cmd_vdsocc = CC32 $@
cmd_vdsocc = $(COMPATCC) -Wp,-MD,$(depfile) $(VDSO_CFLAGS) -c -o $@ $<
cmd_vdsocc = $(CC_COMPAT) -Wp,-MD,$(depfile) $(VDSO_CFLAGS) -c -o $@ $<
quiet_cmd_vdsocc_gettimeofday = CC32 $@
cmd_vdsocc_gettimeofday = $(COMPATCC) -Wp,-MD,$(depfile) $(VDSO_CFLAGS) $(VDSO_CFLAGS_gettimeofday_o) -c -o $@ $<
cmd_vdsocc_gettimeofday = $(CC_COMPAT) -Wp,-MD,$(depfile) $(VDSO_CFLAGS) $(VDSO_CFLAGS_gettimeofday_o) -c -o $@ $<
quiet_cmd_vdsoas = AS32 $@
cmd_vdsoas = $(COMPATCC) -Wp,-MD,$(depfile) $(VDSO_AFLAGS) -c -o $@ $<
cmd_vdsoas = $(CC_COMPAT) -Wp,-MD,$(depfile) $(VDSO_AFLAGS) -c -o $@ $<
quiet_cmd_vdsomunge = MUNGE $@
cmd_vdsomunge = $(obj)/$(munge) $< $@

17
arch/arm64/kvm/hyp/switch.c
View File

@ -229,20 +229,6 @@ static void __hyp_text __hyp_vgic_restore_state(struct kvm_vcpu *vcpu)
}
}
static bool __hyp_text __true_value(void)
{
return true;
}
static bool __hyp_text __false_value(void)
{
return false;
}
static hyp_alternate_select(__check_arm_834220,
__false_value, __true_value,
ARM64_WORKAROUND_834220);
static bool __hyp_text __translate_far_to_hpfar(u64 far, u64 *hpfar)
{
u64 par, tmp;
@ -298,7 +284,8 @@ static bool __hyp_text __populate_fault_info(struct kvm_vcpu *vcpu)
* resolve the IPA using the AT instruction.
*/
if (!(esr & ESR_ELx_S1PTW) &&
(__check_arm_834220()() || (esr & ESR_ELx_FSC_TYPE) == FSC_PERM)) {
(cpus_have_const_cap(ARM64_WORKAROUND_834220) ||
(esr & ESR_ELx_FSC_TYPE) == FSC_PERM)) {
if (!__translate_far_to_hpfar(far, &hpfar))
return false;
} else {

36
arch/arm64/kvm/hyp/tlb.c
View File

@ -67,10 +67,14 @@ static void __hyp_text __tlb_switch_to_guest_nvhe(struct kvm *kvm,
isb();
}
static hyp_alternate_select(__tlb_switch_to_guest,
__tlb_switch_to_guest_nvhe,
__tlb_switch_to_guest_vhe,
ARM64_HAS_VIRT_HOST_EXTN);
static void __hyp_text __tlb_switch_to_guest(struct kvm *kvm,
struct tlb_inv_context *cxt)
{
if (has_vhe())
__tlb_switch_to_guest_vhe(kvm, cxt);
else
__tlb_switch_to_guest_nvhe(kvm, cxt);
}
static void __hyp_text __tlb_switch_to_host_vhe(struct kvm *kvm,
struct tlb_inv_context *cxt)
@ -98,10 +102,14 @@ static void __hyp_text __tlb_switch_to_host_nvhe(struct kvm *kvm,
write_sysreg(0, vttbr_el2);
}
static hyp_alternate_select(__tlb_switch_to_host,
__tlb_switch_to_host_nvhe,
__tlb_switch_to_host_vhe,
ARM64_HAS_VIRT_HOST_EXTN);
static void __hyp_text __tlb_switch_to_host(struct kvm *kvm,
struct tlb_inv_context *cxt)
{
if (has_vhe())
__tlb_switch_to_host_vhe(kvm, cxt);
else
__tlb_switch_to_host_nvhe(kvm, cxt);
}
void __hyp_text __kvm_tlb_flush_vmid_ipa(struct kvm *kvm, phys_addr_t ipa)
{
@ -111,7 +119,7 @@ void __hyp_text __kvm_tlb_flush_vmid_ipa(struct kvm *kvm, phys_addr_t ipa)
/* Switch to requested VMID */
kvm = kern_hyp_va(kvm);
__tlb_switch_to_guest()(kvm, &cxt);
__tlb_switch_to_guest(kvm, &cxt);
/*
* We could do so much better if we had the VA as well.
@ -154,7 +162,7 @@ void __hyp_text __kvm_tlb_flush_vmid_ipa(struct kvm *kvm, phys_addr_t ipa)
if (!has_vhe() && icache_is_vpipt())
__flush_icache_all();
__tlb_switch_to_host()(kvm, &cxt);
__tlb_switch_to_host(kvm, &cxt);
}
void __hyp_text __kvm_tlb_flush_vmid(struct kvm *kvm)
@ -165,13 +173,13 @@ void __hyp_text __kvm_tlb_flush_vmid(struct kvm *kvm)
/* Switch to requested VMID */
kvm = kern_hyp_va(kvm);
__tlb_switch_to_guest()(kvm, &cxt);
__tlb_switch_to_guest(kvm, &cxt);
__tlbi(vmalls12e1is);
dsb(ish);
isb();
__tlb_switch_to_host()(kvm, &cxt);
__tlb_switch_to_host(kvm, &cxt);
}
void __hyp_text __kvm_tlb_flush_local_vmid(struct kvm_vcpu *vcpu)
@ -180,13 +188,13 @@ void __hyp_text __kvm_tlb_flush_local_vmid(struct kvm_vcpu *vcpu)
struct tlb_inv_context cxt;
/* Switch to requested VMID */
__tlb_switch_to_guest()(kvm, &cxt);
__tlb_switch_to_guest(kvm, &cxt);
__tlbi(vmalle1);
dsb(nsh);
isb();
__tlb_switch_to_host()(kvm, &cxt);
__tlb_switch_to_host(kvm, &cxt);
}
void __hyp_text __kvm_flush_vm_context(void)

13
arch/arm64/mm/fault.c
View File

@ -113,6 +113,15 @@ static inline bool is_ttbr1_addr(unsigned long addr)
return arch_kasan_reset_tag(addr) >= PAGE_OFFSET;
}
static inline unsigned long mm_to_pgd_phys(struct mm_struct *mm)
{
/* Either init_pg_dir or swapper_pg_dir */
if (mm == &init_mm)
return __pa_symbol(mm->pgd);
return (unsigned long)virt_to_phys(mm->pgd);
}
/*
* Dump out the page tables associated with 'addr' in the currently active mm.
*/
@ -141,7 +150,7 @@ static void show_pte(unsigned long addr)
pr_alert("%s pgtable: %luk pages, %llu-bit VAs, pgdp=%016lx\n",
mm == &init_mm ? "swapper" : "user", PAGE_SIZE / SZ_1K,
vabits_actual, (unsigned long)virt_to_phys(mm->pgd));
vabits_actual, mm_to_pgd_phys(mm));
pgdp = pgd_offset(mm, addr);
pgd = READ_ONCE(*pgdp);
pr_alert("[%016lx] pgd=%016llx", addr, pgd_val(pgd));
@ -266,7 +275,7 @@ static bool __kprobes is_spurious_el1_translation_fault(unsigned long addr,
* If we got a different type of fault from the AT instruction,
* treat the translation fault as spurious.
*/
dfsc = FIELD_PREP(SYS_PAR_EL1_FST, par);
dfsc = FIELD_GET(SYS_PAR_EL1_FST, par);
return (dfsc & ESR_ELx_FSC_TYPE) != ESR_ELx_FSC_FAULT;
}

1
arch/arm64/xen/Makefile
View File

@ -1,4 +1,3 @@
# SPDX-License-Identifier: GPL-2.0-only
xen-arm-y += $(addprefix ../../arm/xen/, enlighten.o grant-table.o p2m.o mm.o)
obj-y := xen-arm.o hypercall.o
obj-$(CONFIG_XEN_EFI) += $(addprefix ../../arm/xen/, efi.o)

2
arch/mips/boot/dts/qca/ar9331.dtsi
View File

@ -99,7 +99,7 @@
miscintc: interrupt-controller@18060010 {
compatible = "qca,ar7240-misc-intc";
reg = <0x18060010 0x4>;
reg = <0x18060010 0x8>;
interrupt-parent = <&cpuintc>;
interrupts = <6>;

1
arch/mips/configs/mtx1_defconfig
View File

@ -571,7 +571,6 @@ CONFIG_USB_SERIAL_OMNINET=m
CONFIG_USB_EMI62=m
CONFIG_USB_EMI26=m
CONFIG_USB_ADUTUX=m
CONFIG_USB_RIO500=m
CONFIG_USB_LEGOTOWER=m
CONFIG_USB_LCD=m
CONFIG_USB_CYPRESS_CY7C63=m

1
arch/mips/configs/rm200_defconfig
View File

@ -314,7 +314,6 @@ CONFIG_USB_SERIAL_SAFE_PADDED=y
CONFIG_USB_SERIAL_CYBERJACK=m
CONFIG_USB_SERIAL_XIRCOM=m
CONFIG_USB_SERIAL_OMNINET=m
CONFIG_USB_RIO500=m
CONFIG_USB_LEGOTOWER=m
CONFIG_USB_LCD=m
CONFIG_USB_CYTHERM=m

1
arch/mips/fw/arc/memory.c
View File

@ -160,7 +160,6 @@ void __init prom_meminit(void)
void __init prom_free_prom_memory(void)
{
unsigned long addr;
int i;
if (prom_flags & PROM_FLAG_DONT_FREE_TEMP)

2
arch/mips/fw/sni/sniprom.c
View File

@ -43,7 +43,7 @@
/* O32 stack has to be 8-byte aligned. */
static u64 o32_stk[4096];
#define O32_STK &o32_stk[sizeof(o32_stk)]
#define O32_STK (&o32_stk[ARRAY_SIZE(o32_stk)])
#define __PROM_O32(fun, arg) fun arg __asm__(#fun); \
__asm__(#fun " = call_o32")

7
arch/mips/include/asm/cmpxchg.h
View File

@ -77,8 +77,8 @@ extern unsigned long __xchg_called_with_bad_pointer(void)
extern unsigned long __xchg_small(volatile void *ptr, unsigned long val,
unsigned int size);
static inline unsigned long __xchg(volatile void *ptr, unsigned long x,
int size)
static __always_inline
unsigned long __xchg(volatile void *ptr, unsigned long x, int size)
{
switch (size) {
case 1:
@ -153,7 +153,8 @@ static inline unsigned long __xchg(volatile void *ptr, unsigned long x,
extern unsigned long __cmpxchg_small(volatile void *ptr, unsigned long old,
unsigned long new, unsigned int size);
static inline unsigned long __cmpxchg(volatile void *ptr, unsigned long old,
static __always_inline
unsigned long __cmpxchg(volatile void *ptr, unsigned long old,
unsigned long new, unsigned int size)
{
switch (size) {

1
arch/mips/include/asm/octeon/cvmx-ipd.h
View File

@ -36,6 +36,7 @@
#include <asm/octeon/octeon-feature.h>
#include <asm/octeon/cvmx-ipd-defs.h>
#include <asm/octeon/cvmx-pip-defs.h>
enum cvmx_ipd_mode {
CVMX_IPD_OPC_MODE_STT = 0LL, /* All blocks DRAM, not cached in L2 */

1
arch/mips/include/asm/unistd.h
View File

@ -52,6 +52,7 @@
# endif
#define __ARCH_WANT_SYS_FORK
#define __ARCH_WANT_SYS_CLONE
#define __ARCH_WANT_SYS_CLONE3
/* whitelists for checksyscalls */
#define __IGNORE_fadvise64_64

11
arch/mips/include/uapi/asm/hwcap.h
View File

@ -6,5 +6,16 @@
#define HWCAP_MIPS_R6 (1 << 0)
#define HWCAP_MIPS_MSA (1 << 1)
#define HWCAP_MIPS_CRC32 (1 << 2)
#define HWCAP_MIPS_MIPS16 (1 << 3)
#define HWCAP_MIPS_MDMX (1 << 4)
#define HWCAP_MIPS_MIPS3D (1 << 5)
#define HWCAP_MIPS_SMARTMIPS (1 << 6)
#define HWCAP_MIPS_DSP (1 << 7)
#define HWCAP_MIPS_DSP2 (1 << 8)
#define HWCAP_MIPS_DSP3 (1 << 9)
#define HWCAP_MIPS_MIPS16E2 (1 << 10)
#define HWCAP_LOONGSON_MMI (1 << 11)
#define HWCAP_LOONGSON_EXT (1 << 12)
#define HWCAP_LOONGSON_EXT2 (1 << 13)
#endif /* _UAPI_ASM_HWCAP_H */

12
arch/mips/kernel/cpu-bugs64.c
View File

@ -24,7 +24,8 @@ static char r4kwar[] __initdata =
static char daddiwar[] __initdata =
"Enable CPU_DADDI_WORKAROUNDS to rectify.";
static inline void align_mod(const int align, const int mod)
static __always_inline __init
void align_mod(const int align, const int mod)
{
asm volatile(
".set push\n\t"
@ -38,7 +39,8 @@ static inline void align_mod(const int align, const int mod)
: "n"(align), "n"(mod));
}
static __always_inline void mult_sh_align_mod(long *v1, long *v2, long *w,
static __always_inline __init
void mult_sh_align_mod(long *v1, long *v2, long *w,
const int align, const int mod)
{
unsigned long flags;
@ -113,7 +115,7 @@ static __always_inline void mult_sh_align_mod(long *v1, long *v2, long *w,
*w = lw;
}
static inline void check_mult_sh(void)
static __always_inline __init void check_mult_sh(void)
{
long v1[8], v2[8], w[8];
int bug, fix, i;
@ -176,7 +178,7 @@ asmlinkage void __init do_daddi_ov(struct pt_regs *regs)
exception_exit(prev_state);
}
static inline void check_daddi(void)
static __init void check_daddi(void)
{
extern asmlinkage void handle_daddi_ov(void);
unsigned long flags;
@ -242,7 +244,7 @@ static inline void check_daddi(void)
int daddiu_bug = IS_ENABLED(CONFIG_CPU_MIPSR6) ? 0 : -1;
static inline void check_daddiu(void)
static __init void check_daddiu(void)
{
long v, w, tmp;

Some files were not shown because too many files have changed in this diff Show More