arm64: dts: qcom: Add support for Xperia 1 III / 5 III
Add support for SONY Xperia 1 III (PDX215) and 5 III (PDX214) smartphones. Both are based on the SM8350 Sagami platform and feature some really high-end specs, such as: - 4K (1 III / PRO-I) / 1080p (5 III), 120Hz HDR OLED 10-bit panels - USB-C 3.1 with HDMI in (yes, phone as display!) and DP out - 5G - 8 or 12 gigs of ram, 128/256/512 gigs of storage - A 3.5mm headphone jack, a RGB notification LED and a uSD card slot :) - IP65/68 dust/water resistance - Dual front-firing speakers and a lot of microphones - Crazy complex camera hardware (especially on the PRO-I), which includes 4 cameras, an RGBIR sensor and a 3D iToF The aforementioned PRO-I (PDX217) is not supported in this patch, because even though it shares most of the code with 1 III, nobody really has it (yet?) This only adds basic support for booting to a USB shell with a bootloader-enabled display, support for all the awesome hardware listed above will (hopefully) come (hopefully) soon. In order to get a working boot image, you need to run (e.g. for 1 III): cat arch/arm64/boot/Image.gz arch/arm64/boot/dts/qcom/sm8350-sony-xperia-\ sagami-pdx215.dtb > .Image.gz-dtb mkbootimg \ --kernel .Image.gz-dtb \ --ramdisk some_initrd.img \ --pagesize 4096 \ --base 0x0 \ --kernel_offset 0x8000 \ --ramdisk_offset 0x1000000 \ --tags_offset 0x100 \ --cmdline "SOME_CMDLINE" \ --dtb_offset 0x1f00000 \ --header_version 1 \ --os_version 11 \ --os_patch_level 2021-10 \ # or newer -o boot.img-sony-xperia-pdx215 Then, you need to flash it on the device and get rid of all the vendor_boot/dtbo mess: fastboot flash boot boot.img-sony-xperia-pdx215 fastboot erase vendor_boot fastboot flash dtbo emptydtbo.img fastboot reboot Where emptydtbo.img is a tiny file that consists of 2 bytes (all zeroes), doing a "fastboot erase" won't cut it, the bootloader will go crazy and things will fall apart when it tries to overlay random bytes from an empty partition onto a perfectly good appended DTB. Signed-off-by: Konrad Dybcio <konrad.dybcio@somainline.org> Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org> Link: https://lore.kernel.org/r/20211114012755.112226-13-konrad.dybcio@somainline.org
This commit is contained in:
Konrad Dybcio
Bjorn Andersson
parent
9bc2c8fea5
commit
c2721b0c23
@ -116,3 +116,5 @@ dtb-$(CONFIG_ARCH_QCOM) += sm8250-sony-xperia-edo-pdx203.dtb
|
||||
dtb-$(CONFIG_ARCH_QCOM) += sm8250-sony-xperia-edo-pdx206.dtb
|
||||
dtb-$(CONFIG_ARCH_QCOM) += sm8350-hdk.dtb
|
||||
dtb-$(CONFIG_ARCH_QCOM) += sm8350-mtp.dtb
|
||||
dtb-$(CONFIG_ARCH_QCOM) += sm8350-sony-xperia-sagami-pdx214.dtb
|
||||
dtb-$(CONFIG_ARCH_QCOM) += sm8350-sony-xperia-sagami-pdx215.dtb
|
||||
|
||||
@ -0,0 +1,19 @@
|
||||
// SPDX-License-Identifier: BSD-3-Clause
|
||||
/*
|
||||
* Copyright (c) 2021, Konrad Dybcio <konrad.dybcio@somainline.org>
|
||||
*/
|
||||
|
||||
/dts-v1/;
|
||||
|
||||
#include "sm8350-sony-xperia-sagami.dtsi"
|
||||
|
||||
/ {
|
||||
model = "Sony Xperia 5 III";
|
||||
compatible = "sony,pdx214-generic", "qcom,sm8350";
|
||||
};
|
||||
|
||||
&framebuffer {
|
||||
width = <1080>;
|
||||
height = <2520>;
|
||||
stride = <(1080 * 4)>;
|
||||
};
|
||||
@ -0,0 +1,13 @@
|
||||
// SPDX-License-Identifier: BSD-3-Clause
|
||||
/*
|
||||
* Copyright (c) 2021, Konrad Dybcio <konrad.dybcio@somainline.org>
|
||||
*/
|
||||
|
||||
/dts-v1/;
|
||||
|
||||
#include "sm8350-sony-xperia-sagami.dtsi"
|
||||
|
||||
/ {
|
||||
model = "Sony Xperia 1 III";
|
||||
compatible = "sony,pdx215-generic", "qcom,sm8350";
|
||||
};
|
||||
132
arch/arm64/boot/dts/qcom/sm8350-sony-xperia-sagami.dtsi
Normal file
132
arch/arm64/boot/dts/qcom/sm8350-sony-xperia-sagami.dtsi
Normal file
@ -0,0 +1,132 @@
|
||||
// SPDX-License-Identifier: BSD-3-Clause
|
||||
/*
|
||||
* Copyright (c) 2021, Konrad Dybcio <konrad.dybcio@somainline.org>
|
||||
*/
|
||||
|
||||
#include "sm8350.dtsi"
|
||||
#include "pm8350.dtsi"
|
||||
#include "pm8350b.dtsi"
|
||||
#include "pm8350c.dtsi"
|
||||
#include "pmk8350.dtsi"
|
||||
#include "pmr735a.dtsi"
|
||||
#include "pmr735b.dtsi"
|
||||
|
||||
/ {
|
||||
/*
|
||||
* Yes, you are correct, there is NO MORE {msm,board,pmic}-id on SM8350!
|
||||
* Adding it will cause the bootloader to go crazy and randomly crash
|
||||
* shortly after closing UEFI boot services.. Perhaps that has something
|
||||
* to do with the OS running inside a VM now..?
|
||||
*/
|
||||
|
||||
chassis-type = "handset";
|
||||
|
||||
chosen {
|
||||
#address-cells = <2>;
|
||||
#size-cells = <2>;
|
||||
ranges;
|
||||
|
||||
framebuffer: framebuffer@e1000000 {
|
||||
compatible = "simple-framebuffer";
|
||||
reg = <0 0xe1000000 0 0x2300000>;
|
||||
|
||||
/* The display, even though it's 4K, initializes at 1080-ish p */
|
||||
width = <1096>;
|
||||
height = <2560>;
|
||||
stride = <(1096 * 4)>;
|
||||
format = "a8r8g8b8";
|
||||
/*
|
||||
* That's (going to be) a lot of clocks, but it's necessary due
|
||||
* to unused clk cleanup & no panel driver yet
|
||||
*/
|
||||
clocks = <&gcc GCC_DISP_HF_AXI_CLK>,
|
||||
<&gcc GCC_DISP_SF_AXI_CLK>;
|
||||
};
|
||||
};
|
||||
|
||||
gpio-keys {
|
||||
compatible = "gpio-keys";
|
||||
|
||||
/* For reasons still unknown, GAssist key and Camera Focus/Shutter don't work.. */
|
||||
|
||||
vol-down {
|
||||
label = "Volume Down";
|
||||
linux,code = <KEY_VOLUMEDOWN>;
|
||||
gpios = <&pmk8350_gpios 3 GPIO_ACTIVE_LOW>;
|
||||
debounce-interval = <15>;
|
||||
linux,can-disable;
|
||||
gpio-key,wakeup;
|
||||
};
|
||||
};
|
||||
|
||||
reserved-memory {
|
||||
cont_splash_mem: memory@e1000000 {
|
||||
reg = <0 0xe1000000 0 0x2300000>;
|
||||
no-map;
|
||||
};
|
||||
|
||||
ramoops@ffc00000 {
|
||||
compatible = "ramoops";
|
||||
reg = <0 0xffc00000 0 0x100000>;
|
||||
console-size = <0x40000>;
|
||||
record-size = <0x1000>;
|
||||
no-map;
|
||||
};
|
||||
};
|
||||
};
|
||||
|
||||
&pmk8350_rtc {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&pon_pwrkey {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&pon_resin {
|
||||
status = "okay";
|
||||
linux,code = <KEY_VOLUMEUP>;
|
||||
};
|
||||
|
||||
&qupv3_id_0 {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&qupv3_id_1 {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&qupv3_id_2 {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&tlmm {
|
||||
gpio-reserved-ranges = <44 4>;
|
||||
};
|
||||
|
||||
/* BIG WARNING! DO NOT TOUCH UFS, YOUR DEVICE WILL DIE! */
|
||||
&ufs_mem_hc { status = "disabled"; };
|
||||
&ufs_mem_phy { status = "disabled"; };
|
||||
|
||||
/* TODO: Make USB3 work (perhaps needs regulators for higher-current operation?) */
|
||||
&usb_1 {
|
||||
status = "okay";
|
||||
|
||||
qcom,select-utmi-as-pipe-clk;
|
||||
};
|
||||
|
||||
&usb_1_dwc3 {
|
||||
dr_mode = "peripheral";
|
||||
|
||||
maximum-speed = "high-speed";
|
||||
phys = <&usb_1_hsphy>;
|
||||
phy-names = "usb2-phy";
|
||||
};
|
||||
|
||||
&usb_1_hsphy {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&usb_1_qmpphy {
|
||||
status = "okay";
|
||||
};
|
||||
Loading…
x
Reference in New Issue
Block a user