fbdev: sh_mobile_hdmi: add support for more precise HDMI clock configuration
The HDMI clock has to be reconfigured for different video modes. However, the precision of the supplying SoC clock on SH-Mobile systems is often insufficient. This patch allows to additionally reconfigure the parent clock to achieve the optimal HDMI clock frequency, in case this is supported by the platform. Signed-off-by: Guennadi Liakhovetski <g.liakhovetski@gmx.de> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
This commit is contained in:
parent
5fd284e6cd
commit
c36940e678
@ -685,11 +685,21 @@ static void sh_hdmi_configure(struct sh_hdmi *hdmi)
|
||||
}
|
||||
|
||||
static unsigned long sh_hdmi_rate_error(struct sh_hdmi *hdmi,
|
||||
const struct fb_videomode *mode)
|
||||
const struct fb_videomode *mode,
|
||||
unsigned long *hdmi_rate, unsigned long *parent_rate)
|
||||
{
|
||||
long target = PICOS2KHZ(mode->pixclock) * 1000,
|
||||
rate = clk_round_rate(hdmi->hdmi_clk, target);
|
||||
unsigned long rate_error = rate > 0 ? abs(rate - target) : ULONG_MAX;
|
||||
unsigned long target = PICOS2KHZ(mode->pixclock) * 1000, rate_error;
|
||||
struct sh_mobile_hdmi_info *pdata = hdmi->dev->platform_data;
|
||||
|
||||
*hdmi_rate = clk_round_rate(hdmi->hdmi_clk, target);
|
||||
if ((long)*hdmi_rate < 0)
|
||||
*hdmi_rate = clk_get_rate(hdmi->hdmi_clk);
|
||||
|
||||
rate_error = (long)*hdmi_rate > 0 ? abs(*hdmi_rate - target) : ULONG_MAX;
|
||||
if (rate_error && pdata->clk_optimize_parent)
|
||||
rate_error = pdata->clk_optimize_parent(target, hdmi_rate, parent_rate);
|
||||
else if (clk_get_parent(hdmi->hdmi_clk))
|
||||
*parent_rate = clk_get_rate(clk_get_parent(hdmi->hdmi_clk));
|
||||
|
||||
dev_dbg(hdmi->dev, "%u-%u-%u-%u x %u-%u-%u-%u\n",
|
||||
mode->left_margin, mode->xres,
|
||||
@ -697,14 +707,15 @@ static unsigned long sh_hdmi_rate_error(struct sh_hdmi *hdmi,
|
||||
mode->upper_margin, mode->yres,
|
||||
mode->lower_margin, mode->vsync_len);
|
||||
|
||||
dev_dbg(hdmi->dev, "\t@%lu(+/-%lu)Hz, e=%lu / 1000, r=%uHz\n", target,
|
||||
rate_error, rate_error ? 10000 / (10 * target / rate_error) : 0,
|
||||
mode->refresh);
|
||||
dev_dbg(hdmi->dev, "\t@%lu(+/-%lu)Hz, e=%lu / 1000, r=%uHz, p=%luHz\n", target,
|
||||
rate_error, rate_error ? 10000 / (10 * target / rate_error) : 0,
|
||||
mode->refresh, *parent_rate);
|
||||
|
||||
return rate_error;
|
||||
}
|
||||
|
||||
static int sh_hdmi_read_edid(struct sh_hdmi *hdmi)
|
||||
static int sh_hdmi_read_edid(struct sh_hdmi *hdmi, unsigned long *hdmi_rate,
|
||||
unsigned long *parent_rate)
|
||||
{
|
||||
struct fb_var_screeninfo tmpvar;
|
||||
struct fb_var_screeninfo *var = &tmpvar;
|
||||
@ -754,11 +765,14 @@ static int sh_hdmi_read_edid(struct sh_hdmi *hdmi)
|
||||
for (i = 0, mode = hdmi->monspec.modedb;
|
||||
f_width && f_height && i < hdmi->monspec.modedb_len && !exact_match;
|
||||
i++, mode++) {
|
||||
unsigned long rate_error = sh_hdmi_rate_error(hdmi, mode);
|
||||
unsigned long rate_error;
|
||||
|
||||
/* No interest in unmatching modes */
|
||||
if (f_width != mode->xres || f_height != mode->yres)
|
||||
continue;
|
||||
|
||||
rate_error = sh_hdmi_rate_error(hdmi, mode, hdmi_rate, parent_rate);
|
||||
|
||||
if (f_refresh == mode->refresh || (!f_refresh && !rate_error))
|
||||
/*
|
||||
* Exact match if either the refresh rate matches or it
|
||||
@ -802,7 +816,7 @@ static int sh_hdmi_read_edid(struct sh_hdmi *hdmi)
|
||||
|
||||
if (modelist) {
|
||||
found = &modelist->mode;
|
||||
found_rate_error = sh_hdmi_rate_error(hdmi, found);
|
||||
found_rate_error = sh_hdmi_rate_error(hdmi, found, hdmi_rate, parent_rate);
|
||||
}
|
||||
}
|
||||
|
||||
@ -810,10 +824,6 @@ static int sh_hdmi_read_edid(struct sh_hdmi *hdmi)
|
||||
if (!found)
|
||||
return -ENXIO;
|
||||
|
||||
dev_info(hdmi->dev, "Using %s mode %ux%u@%uHz (%luHz), clock error %luHz\n",
|
||||
modelist ? "default" : "EDID", found->xres, found->yres,
|
||||
found->refresh, PICOS2KHZ(found->pixclock) * 1000, found_rate_error);
|
||||
|
||||
if ((found->xres == 720 && found->yres == 480) ||
|
||||
(found->xres == 1280 && found->yres == 720) ||
|
||||
(found->xres == 1920 && found->yres == 1080))
|
||||
@ -821,6 +831,11 @@ static int sh_hdmi_read_edid(struct sh_hdmi *hdmi)
|
||||
else
|
||||
hdmi->preprogrammed_mode = false;
|
||||
|
||||
dev_dbg(hdmi->dev, "Using %s %s mode %ux%u@%uHz (%luHz), clock error %luHz\n",
|
||||
modelist ? "default" : "EDID", hdmi->preprogrammed_mode ? "VIC" : "external",
|
||||
found->xres, found->yres, found->refresh,
|
||||
PICOS2KHZ(found->pixclock) * 1000, found_rate_error);
|
||||
|
||||
fb_videomode_to_var(&hdmi->var, found);
|
||||
sh_hdmi_external_video_param(hdmi);
|
||||
|
||||
@ -972,39 +987,38 @@ static bool sh_hdmi_must_reconfigure(struct sh_hdmi *hdmi)
|
||||
|
||||
/**
|
||||
* sh_hdmi_clk_configure() - set HDMI clock frequency and enable the clock
|
||||
* @hdmi: driver context
|
||||
* @pixclock: pixel clock period in picoseconds
|
||||
* return: configured positive rate if successful
|
||||
* 0 if couldn't set the rate, but managed to enable the clock
|
||||
* negative error, if couldn't enable the clock
|
||||
* @hdmi: driver context
|
||||
* @hdmi_rate: HDMI clock frequency in Hz
|
||||
* @parent_rate: if != 0 - set parent clock rate for optimal precision
|
||||
* return: configured positive rate if successful
|
||||
* 0 if couldn't set the rate, but managed to enable the
|
||||
* clock, negative error, if couldn't enable the clock
|
||||
*/
|
||||
static long sh_hdmi_clk_configure(struct sh_hdmi *hdmi, unsigned long pixclock)
|
||||
static long sh_hdmi_clk_configure(struct sh_hdmi *hdmi, unsigned long hdmi_rate,
|
||||
unsigned long parent_rate)
|
||||
{
|
||||
long rate;
|
||||
struct sh_mobile_hdmi_info *pdata = hdmi->dev->platform_data;
|
||||
int ret;
|
||||
|
||||
rate = PICOS2KHZ(pixclock) * 1000;
|
||||
rate = clk_round_rate(hdmi->hdmi_clk, rate);
|
||||
if (rate > 0) {
|
||||
ret = clk_set_rate(hdmi->hdmi_clk, rate);
|
||||
if (parent_rate && clk_get_parent(hdmi->hdmi_clk)) {
|
||||
ret = clk_set_rate(clk_get_parent(hdmi->hdmi_clk), parent_rate);
|
||||
if (ret < 0) {
|
||||
dev_warn(hdmi->dev, "Cannot set rate %ld: %d\n", rate, ret);
|
||||
rate = 0;
|
||||
dev_warn(hdmi->dev, "Cannot set parent rate %ld: %d\n", parent_rate, ret);
|
||||
hdmi_rate = clk_round_rate(hdmi->hdmi_clk, hdmi_rate);
|
||||
} else {
|
||||
dev_dbg(hdmi->dev, "HDMI set frequency %lu\n", rate);
|
||||
dev_dbg(hdmi->dev, "HDMI set parent frequency %lu\n", parent_rate);
|
||||
}
|
||||
} else {
|
||||
rate = 0;
|
||||
dev_warn(hdmi->dev, "Cannot get suitable rate: %ld\n", rate);
|
||||
}
|
||||
|
||||
ret = clk_enable(hdmi->hdmi_clk);
|
||||
ret = clk_set_rate(hdmi->hdmi_clk, hdmi_rate);
|
||||
if (ret < 0) {
|
||||
dev_err(hdmi->dev, "Cannot enable clock: %d\n", ret);
|
||||
return ret;
|
||||
dev_warn(hdmi->dev, "Cannot set rate %ld: %d\n", hdmi_rate, ret);
|
||||
hdmi_rate = 0;
|
||||
} else {
|
||||
dev_dbg(hdmi->dev, "HDMI set frequency %lu\n", hdmi_rate);
|
||||
}
|
||||
|
||||
return rate;
|
||||
return hdmi_rate;
|
||||
}
|
||||
|
||||
/* Hotplug interrupt occurred, read EDID */
|
||||
@ -1024,16 +1038,17 @@ static void sh_hdmi_edid_work_fn(struct work_struct *work)
|
||||
mutex_lock(&hdmi->mutex);
|
||||
|
||||
if (hdmi->hp_state == HDMI_HOTPLUG_EDID_DONE) {
|
||||
unsigned long parent_rate = 0, hdmi_rate;
|
||||
|
||||
/* A device has been plugged in */
|
||||
pm_runtime_get_sync(hdmi->dev);
|
||||
|
||||
ret = sh_hdmi_read_edid(hdmi);
|
||||
ret = sh_hdmi_read_edid(hdmi, &hdmi_rate, &parent_rate);
|
||||
if (ret < 0)
|
||||
goto out;
|
||||
|
||||
/* Reconfigure the clock */
|
||||
clk_disable(hdmi->hdmi_clk);
|
||||
ret = sh_hdmi_clk_configure(hdmi, hdmi->var.pixclock);
|
||||
ret = sh_hdmi_clk_configure(hdmi, hdmi_rate, parent_rate);
|
||||
if (ret < 0)
|
||||
goto out;
|
||||
|
||||
@ -1166,13 +1181,22 @@ static int __init sh_hdmi_probe(struct platform_device *pdev)
|
||||
goto egetclk;
|
||||
}
|
||||
|
||||
/* Some arbitrary relaxed pixclock just to get things started */
|
||||
rate = sh_hdmi_clk_configure(hdmi, 37037);
|
||||
/* An arbitrary relaxed pixclock just to get things started: from standard 480p */
|
||||
rate = clk_round_rate(hdmi->hdmi_clk, PICOS2KHZ(37037));
|
||||
if (rate > 0)
|
||||
rate = sh_hdmi_clk_configure(hdmi, rate, 0);
|
||||
|
||||
if (rate < 0) {
|
||||
ret = rate;
|
||||
goto erate;
|
||||
}
|
||||
|
||||
ret = clk_enable(hdmi->hdmi_clk);
|
||||
if (ret < 0) {
|
||||
dev_err(hdmi->dev, "Cannot enable clock: %d\n", ret);
|
||||
goto erate;
|
||||
}
|
||||
|
||||
dev_dbg(&pdev->dev, "Enabled HDMI clock at %luHz\n", rate);
|
||||
|
||||
if (!request_mem_region(res->start, resource_size(res), dev_name(&pdev->dev))) {
|
||||
@ -1190,10 +1214,6 @@ static int __init sh_hdmi_probe(struct platform_device *pdev)
|
||||
|
||||
platform_set_drvdata(pdev, hdmi);
|
||||
|
||||
/* Product and revision IDs are 0 in sh-mobile version */
|
||||
dev_info(&pdev->dev, "Detected HDMI controller 0x%x:0x%x\n",
|
||||
hdmi_read(hdmi, HDMI_PRODUCT_ID), hdmi_read(hdmi, HDMI_REVISION_ID));
|
||||
|
||||
/* Set up LCDC callbacks */
|
||||
board_cfg = &pdata->lcd_chan->board_cfg;
|
||||
board_cfg->owner = THIS_MODULE;
|
||||
@ -1206,6 +1226,10 @@ static int __init sh_hdmi_probe(struct platform_device *pdev)
|
||||
pm_runtime_enable(&pdev->dev);
|
||||
pm_runtime_resume(&pdev->dev);
|
||||
|
||||
/* Product and revision IDs are 0 in sh-mobile version */
|
||||
dev_info(&pdev->dev, "Detected HDMI controller 0x%x:0x%x\n",
|
||||
hdmi_read(hdmi, HDMI_PRODUCT_ID), hdmi_read(hdmi, HDMI_REVISION_ID));
|
||||
|
||||
ret = request_irq(irq, sh_hdmi_hotplug, 0,
|
||||
dev_name(&pdev->dev), hdmi);
|
||||
if (ret < 0) {
|
||||
|
@ -13,6 +13,7 @@
|
||||
|
||||
struct sh_mobile_lcdc_chan_cfg;
|
||||
struct device;
|
||||
struct clk;
|
||||
|
||||
/*
|
||||
* flags format
|
||||
@ -33,6 +34,8 @@ struct sh_mobile_hdmi_info {
|
||||
struct sh_mobile_lcdc_chan_cfg *lcd_chan;
|
||||
struct device *lcd_dev;
|
||||
unsigned int flags;
|
||||
long (*clk_optimize_parent)(unsigned long target, unsigned long *best_freq,
|
||||
unsigned long *parent_freq);
|
||||
};
|
||||
|
||||
#endif
|
||||
|
Loading…
Reference in New Issue
Block a user