hwmon: (w83627ehf) Add support for W83667HG-B
Add support for W83667HG-B (very similar to the W83667HG). Signed-off-by: Guenter Roeck <guenter.roeck@ericsson.com> Signed-off-by: Jean Delvare <khali@linux-fr.org>
This commit is contained in:
Guenter Roeck
Jean Delvare
parent
da2e025590
commit
c39aedafb2
@ -20,6 +20,10 @@ Supported chips:
|
||||
Prefix: 'w83667hg'
|
||||
Addresses scanned: ISA address retrieved from Super I/O registers
|
||||
Datasheet: not available
|
||||
* Winbond W83667HG-B
|
||||
Prefix: 'w83667hg'
|
||||
Addresses scanned: ISA address retrieved from Super I/O registers
|
||||
Datasheet: Available from Nuvoton upon request
|
||||
|
||||
Authors:
|
||||
Jean Delvare <khali@linux-fr.org>
|
||||
@ -32,8 +36,8 @@ Description
|
||||
-----------
|
||||
|
||||
This driver implements support for the Winbond W83627EHF, W83627EHG,
|
||||
W83627DHG, W83627DHG-P and W83667HG super I/O chips. We will refer to them
|
||||
collectively as Winbond chips.
|
||||
W83627DHG, W83627DHG-P, W83667HG and W83667HG-B super I/O chips.
|
||||
We will refer to them collectively as Winbond chips.
|
||||
|
||||
The chips implement three temperature sensors, five fan rotation
|
||||
speed sensors, ten analog voltage sensors (only nine for the 627DHG), one
|
||||
@ -68,14 +72,15 @@ follows:
|
||||
temp1 -> pwm1
|
||||
temp2 -> pwm2
|
||||
temp3 -> pwm3
|
||||
prog -> pwm4 (not on 667HG; the programmable setting is not supported by
|
||||
the driver)
|
||||
prog -> pwm4 (not on 667HG and 667HG-B; the programmable setting is not
|
||||
supported by the driver)
|
||||
|
||||
/sys files
|
||||
----------
|
||||
|
||||
name - this is a standard hwmon device entry. For the W83627EHF and W83627EHG,
|
||||
it is set to "w83627ehf" and for the W83627DHG it is set to "w83627dhg"
|
||||
it is set to "w83627ehf", for the W83627DHG it is set to "w83627dhg",
|
||||
and for the W83667HG it is set to "w83667hg".
|
||||
|
||||
pwm[1-4] - this file stores PWM duty cycle or DC value (fan speed) in range:
|
||||
0 (stop) to 255 (full)
|
||||
|
||||
@ -39,6 +39,7 @@
|
||||
w83627dhg 9 5 4 3 0xa020 0xc1 0x5ca3
|
||||
w83627dhg-p 9 5 4 3 0xb070 0xc1 0x5ca3
|
||||
w83667hg 9 5 3 3 0xa510 0xc1 0x5ca3
|
||||
w83667hg-b 9 5 3 3 0xb350 0xc1 0x5ca3
|
||||
*/
|
||||
|
||||
#include <linux/module.h>
|
||||
@ -55,7 +56,7 @@
|
||||
#include <linux/io.h>
|
||||
#include "lm75.h"
|
||||
|
||||
enum kinds { w83627ehf, w83627dhg, w83627dhg_p, w83667hg };
|
||||
enum kinds { w83627ehf, w83627dhg, w83627dhg_p, w83667hg, w83667hg_b };
|
||||
|
||||
/* used to set data->name = w83627ehf_device_names[data->sio_kind] */
|
||||
static const char * w83627ehf_device_names[] = {
|
||||
@ -63,6 +64,7 @@ static const char * w83627ehf_device_names[] = {
|
||||
"w83627dhg",
|
||||
"w83627dhg",
|
||||
"w83667hg",
|
||||
"w83667hg",
|
||||
};
|
||||
|
||||
static unsigned short force_id;
|
||||
@ -91,6 +93,7 @@ MODULE_PARM_DESC(force_id, "Override the detected device ID");
|
||||
#define SIO_W83627DHG_ID 0xa020
|
||||
#define SIO_W83627DHG_P_ID 0xb070
|
||||
#define SIO_W83667HG_ID 0xa510
|
||||
#define SIO_W83667HG_B_ID 0xb350
|
||||
#define SIO_ID_MASK 0xFFF0
|
||||
|
||||
static inline void
|
||||
@ -201,8 +204,14 @@ static const u8 W83627EHF_REG_TOLERANCE[] = { 0x07, 0x07, 0x14, 0x62 };
|
||||
static const u8 W83627EHF_REG_FAN_START_OUTPUT[] = { 0x0a, 0x0b, 0x16, 0x65 };
|
||||
static const u8 W83627EHF_REG_FAN_STOP_OUTPUT[] = { 0x08, 0x09, 0x15, 0x64 };
|
||||
static const u8 W83627EHF_REG_FAN_STOP_TIME[] = { 0x0c, 0x0d, 0x17, 0x66 };
|
||||
static const u8 W83627EHF_REG_FAN_MAX_OUTPUT[] = { 0xff, 0x67, 0xff, 0x69 };
|
||||
static const u8 W83627EHF_REG_FAN_STEP_OUTPUT[] = { 0xff, 0x68, 0xff, 0x6a };
|
||||
|
||||
static const u8 W83627EHF_REG_FAN_MAX_OUTPUT_COMMON[]
|
||||
= { 0xff, 0x67, 0xff, 0x69 };
|
||||
static const u8 W83627EHF_REG_FAN_STEP_OUTPUT_COMMON[]
|
||||
= { 0xff, 0x68, 0xff, 0x6a };
|
||||
|
||||
static const u8 W83627EHF_REG_FAN_MAX_OUTPUT_W83667_B[] = { 0x67, 0x69, 0x6b };
|
||||
static const u8 W83627EHF_REG_FAN_STEP_OUTPUT_W83667_B[] = { 0x68, 0x6a, 0x6c };
|
||||
|
||||
/*
|
||||
* Conversions
|
||||
@ -1382,10 +1391,11 @@ static int __devinit w83627ehf_probe(struct platform_device *pdev)
|
||||
/* 627EHG and 627EHF have 10 voltage inputs; 627DHG and 667HG have 9 */
|
||||
data->in_num = (sio_data->kind == w83627ehf) ? 10 : 9;
|
||||
/* 667HG has 3 pwms */
|
||||
data->pwm_num = (sio_data->kind == w83667hg) ? 3 : 4;
|
||||
data->pwm_num = (sio_data->kind == w83667hg
|
||||
|| sio_data->kind == w83667hg_b) ? 3 : 4;
|
||||
|
||||
/* Check temp3 configuration bit for 667HG */
|
||||
if (sio_data->kind == w83667hg) {
|
||||
if (sio_data->kind == w83667hg || sio_data->kind == w83667hg_b) {
|
||||
data->temp3_disable = w83627ehf_read_value(data,
|
||||
W83627EHF_REG_TEMP_CONFIG[1]) & 0x01;
|
||||
data->in6_skip = !data->temp3_disable;
|
||||
@ -1393,8 +1403,17 @@ static int __devinit w83627ehf_probe(struct platform_device *pdev)
|
||||
|
||||
data->REG_FAN_START_OUTPUT = W83627EHF_REG_FAN_START_OUTPUT;
|
||||
data->REG_FAN_STOP_OUTPUT = W83627EHF_REG_FAN_STOP_OUTPUT;
|
||||
data->REG_FAN_MAX_OUTPUT = W83627EHF_REG_FAN_MAX_OUTPUT;
|
||||
data->REG_FAN_STEP_OUTPUT = W83627EHF_REG_FAN_STEP_OUTPUT;
|
||||
if (sio_data->kind == w83667hg_b) {
|
||||
data->REG_FAN_MAX_OUTPUT =
|
||||
W83627EHF_REG_FAN_MAX_OUTPUT_W83667_B;
|
||||
data->REG_FAN_STEP_OUTPUT =
|
||||
W83627EHF_REG_FAN_STEP_OUTPUT_W83667_B;
|
||||
} else {
|
||||
data->REG_FAN_MAX_OUTPUT =
|
||||
W83627EHF_REG_FAN_MAX_OUTPUT_COMMON;
|
||||
data->REG_FAN_STEP_OUTPUT =
|
||||
W83627EHF_REG_FAN_STEP_OUTPUT_COMMON;
|
||||
}
|
||||
|
||||
/* Initialize the chip */
|
||||
w83627ehf_init_device(data);
|
||||
@ -1402,7 +1421,7 @@ static int __devinit w83627ehf_probe(struct platform_device *pdev)
|
||||
data->vrm = vid_which_vrm();
|
||||
superio_enter(sio_data->sioreg);
|
||||
/* Read VID value */
|
||||
if (sio_data->kind == w83667hg) {
|
||||
if (sio_data->kind == w83667hg || sio_data->kind == w83667hg_b) {
|
||||
/* W83667HG has different pins for VID input and output, so
|
||||
we can get the VID input values directly at logical device D
|
||||
0xe3. */
|
||||
@ -1453,7 +1472,7 @@ static int __devinit w83627ehf_probe(struct platform_device *pdev)
|
||||
}
|
||||
|
||||
/* fan4 and fan5 share some pins with the GPIO and serial flash */
|
||||
if (sio_data->kind == w83667hg) {
|
||||
if (sio_data->kind == w83667hg || sio_data->kind == w83667hg_b) {
|
||||
fan5pin = superio_inb(sio_data->sioreg, 0x27) & 0x20;
|
||||
fan4pin = superio_inb(sio_data->sioreg, 0x27) & 0x40;
|
||||
} else {
|
||||
@ -1609,6 +1628,7 @@ static int __init w83627ehf_find(int sioaddr, unsigned short *addr,
|
||||
static const char __initdata sio_name_W83627DHG[] = "W83627DHG";
|
||||
static const char __initdata sio_name_W83627DHG_P[] = "W83627DHG-P";
|
||||
static const char __initdata sio_name_W83667HG[] = "W83667HG";
|
||||
static const char __initdata sio_name_W83667HG_B[] = "W83667HG-B";
|
||||
|
||||
u16 val;
|
||||
const char *sio_name;
|
||||
@ -1641,6 +1661,10 @@ static int __init w83627ehf_find(int sioaddr, unsigned short *addr,
|
||||
sio_data->kind = w83667hg;
|
||||
sio_name = sio_name_W83667HG;
|
||||
break;
|
||||
case SIO_W83667HG_B_ID:
|
||||
sio_data->kind = w83667hg_b;
|
||||
sio_name = sio_name_W83667HG_B;
|
||||
break;
|
||||
default:
|
||||
if (val != 0xffff)
|
||||
pr_debug(DRVNAME ": unsupported chip ID: 0x%04x\n",
|
||||
|
||||
Loading…
Reference in New Issue
Block a user