Merge branch 'for-linus/i2c-2635' of git://git.fluff.org/bjdooks/linux

* 'for-linus/i2c-2635' of git://git.fluff.org/bjdooks/linux: (21 commits)
  i2c-highlander: remover superflous variable
  i2c-ibm-iic: drop NO_IRQ
  i2c-cpm: drop NO_IRQ
  i2c-mpc: drop NO_IRQ
  MAINTAINERS: add i2c tree for embedded platforms
  i2c-pxa: only define 'blue_murder'-function if DEBUG is #defined
  i2c-pxa: remove unused macro
  i2c-nomadik: fix operator precedence warning
  i2c-nomadik: release region when removed
  OMAP3: I2C: Clean up Errata 1p153 handling
  OMAP2/3: I2C: Errata ID i207: Clear wrong RDR interrupt
  omap: i2c: add a timeout to the busy waiting
  omap: i2c: make errata 1.153 workaround a separate function
  i2c-omap: add mpu wake up latency constraint in i2c
  omap: i2c: Add i2c support on omap4 platform
  i2c-bfin-twi: return completion in interrupt for smbus quick transfers
  i2c-bfin-twi: remove redundant retry
  i2c-bfin-twi: fix lost interrupts at high speeds
  i2c-bfin-twi: add debug output for error status
  i2c-bfin-twi: integrate timeout timer with completion interface
  ...

MAINTAINERS

@@ -2747,6 +2747,7 @@ M:	"Ben Dooks (embedded platforms)" <ben-linux@fluff.org>
 L:	linux-i2c@vger.kernel.org
 W:	http://i2c.wiki.kernel.org/
 T:	quilt kernel.org/pub/linux/kernel/people/jdelvare/linux-2.6/jdelvare-i2c/
+T:	git git://git.fluff.org/bjdooks/linux.git
 S:	Maintained
 F:	Documentation/i2c/
 F:	drivers/i2c/

arch/arm/plat-omap/i2c.c

@@ -26,9 +26,12 @@
 #include <linux/kernel.h>
 #include <linux/platform_device.h>
 #include <linux/i2c.h>
+#include <linux/i2c-omap.h>
+
 #include <mach/irqs.h>
 #include <plat/mux.h>
 #include <plat/i2c.h>
+#include <plat/omap-pm.h>
 
 #define OMAP_I2C_SIZE		0x3f
 #define OMAP1_I2C_BASE		0xfffb3800
@@ -70,14 +73,14 @@ static struct resource i2c_resources[][2] = {
 		},					\
 	}
 
-static u32 i2c_rate[ARRAY_SIZE(i2c_resources)];
+static struct omap_i2c_bus_platform_data i2c_pdata[ARRAY_SIZE(i2c_resources)];
 static struct platform_device omap_i2c_devices[] = {
-	I2C_DEV_BUILDER(1, i2c_resources[0], &i2c_rate[0]),
+	I2C_DEV_BUILDER(1, i2c_resources[0], &i2c_pdata[0]),
 #if	defined(CONFIG_ARCH_OMAP2) || defined(CONFIG_ARCH_OMAP3)
-	I2C_DEV_BUILDER(2, i2c_resources[1], &i2c_rate[1]),
+	I2C_DEV_BUILDER(2, i2c_resources[1], &i2c_pdata[1]),
 #endif
 #if	defined(CONFIG_ARCH_OMAP3)
-	I2C_DEV_BUILDER(3, i2c_resources[2], &i2c_rate[2]),
+	I2C_DEV_BUILDER(3, i2c_resources[2], &i2c_pdata[2]),
 #endif
 };
 
@@ -100,10 +103,12 @@ static int __init omap_i2c_nr_ports(void)
 static int __init omap_i2c_add_bus(int bus_id)
 {
 	struct platform_device *pdev;
+	struct omap_i2c_bus_platform_data *pd;
 	struct resource *res;
 	resource_size_t base, irq;
 
 	pdev = &omap_i2c_devices[bus_id - 1];
+	pd = pdev->dev.platform_data;
 	if (bus_id == 1) {
 		res = pdev->resource;
 		if (cpu_class_is_omap1()) {
@@ -123,6 +128,15 @@ static int __init omap_i2c_add_bus(int bus_id)
 	if (cpu_class_is_omap2())
 		omap2_i2c_mux_pins(bus_id);
 
+	/*
+	 * When waiting for completion of a i2c transfer, we need to
+	 * set a wake up latency constraint for the MPU. This is to
+	 * ensure quick enough wakeup from idle, when transfer
+	 * completes.
+	 */
+	if (cpu_is_omap34xx())
+		pd->set_mpu_wkup_lat = omap_pm_set_max_mpu_wakeup_lat;
+
 	return platform_device_register(pdev);
 }
 
@@ -146,8 +160,8 @@ static int __init omap_i2c_bus_setup(char *str)
 	get_options(str, 3, ints);
 	if (ints[0] < 2 || ints[1] < 1 || ints[1] > ports)
 		return 0;
-	i2c_rate[ints[1] - 1] = ints[2];
+	i2c_pdata[ints[1] - 1].clkrate = ints[2];
-	i2c_rate[ints[1] - 1] |= OMAP_I2C_CMDLINE_SETUP;
+	i2c_pdata[ints[1] - 1].clkrate |= OMAP_I2C_CMDLINE_SETUP;
 
 	return 1;
 }
@@ -161,9 +175,9 @@ static int __init omap_register_i2c_bus_cmdline(void)
 {
 	int i, err = 0;
 
-	for (i = 0; i < ARRAY_SIZE(i2c_rate); i++)
+	for (i = 0; i < ARRAY_SIZE(i2c_pdata); i++)
-		if (i2c_rate[i] & OMAP_I2C_CMDLINE_SETUP) {
+		if (i2c_pdata[i].clkrate & OMAP_I2C_CMDLINE_SETUP) {
-			i2c_rate[i] &= ~OMAP_I2C_CMDLINE_SETUP;
+			i2c_pdata[i].clkrate &= ~OMAP_I2C_CMDLINE_SETUP;
 			err = omap_i2c_add_bus(i + 1);
 			if (err)
 				goto out;
@@ -197,9 +211,10 @@ int __init omap_register_i2c_bus(int bus_id, u32 clkrate,
 			return err;
 	}
 
-	if (!i2c_rate[bus_id - 1])
+	if (!i2c_pdata[bus_id - 1].clkrate)
-		i2c_rate[bus_id - 1] = clkrate;
+		i2c_pdata[bus_id - 1].clkrate = clkrate;
-	i2c_rate[bus_id - 1] &= ~OMAP_I2C_CMDLINE_SETUP;
+
+	i2c_pdata[bus_id - 1].clkrate &= ~OMAP_I2C_CMDLINE_SETUP;
 
 	return omap_i2c_add_bus(bus_id);
 }

drivers/i2c/busses/i2c-bfin-twi.c

@@ -25,8 +25,6 @@
 #include <asm/portmux.h>
 #include <asm/irq.h>
 
-#define POLL_TIMEOUT       (2 * HZ)
-
 /* SMBus mode*/
 #define TWI_I2C_MODE_STANDARD		1
 #define TWI_I2C_MODE_STANDARDSUB	2
@@ -44,8 +42,6 @@ struct bfin_twi_iface {
 	int			cur_mode;
 	int			manual_stop;
 	int			result;
-	int			timeout_count;
-	struct timer_list	timeout_timer;
 	struct i2c_adapter	adap;
 	struct completion	complete;
 	struct i2c_msg 		*pmsg;
@@ -85,14 +81,15 @@ static const u16 pin_req[2][3] = {
 	{P_TWI1_SCL, P_TWI1_SDA, 0},
 };
 
-static void bfin_twi_handle_interrupt(struct bfin_twi_iface *iface)
+static void bfin_twi_handle_interrupt(struct bfin_twi_iface *iface,
+					unsigned short twi_int_status)
 {
-	unsigned short twi_int_status = read_INT_STAT(iface);
 	unsigned short mast_stat = read_MASTER_STAT(iface);
 
 	if (twi_int_status & XMTSERV) {
 		/* Transmit next data */
 		if (iface->writeNum > 0) {
+			SSYNC();
 			write_XMT_DATA8(iface, *(iface->transPtr++));
 			iface->writeNum--;
 		}
@@ -114,10 +111,6 @@ static void bfin_twi_handle_interrupt(struct bfin_twi_iface *iface)
 				write_MASTER_CTL(iface,
 					(read_MASTER_CTL(iface) | RSTART) & ~MDIR);
 		}
-		SSYNC();
-		/* Clear status */
-		write_INT_STAT(iface, XMTSERV);
-		SSYNC();
 	}
 	if (twi_int_status & RCVSERV) {
 		if (iface->readNum > 0) {
@@ -139,7 +132,6 @@ static void bfin_twi_handle_interrupt(struct bfin_twi_iface *iface)
 		} else if (iface->manual_stop) {
 			write_MASTER_CTL(iface,
 				read_MASTER_CTL(iface) | STOP);
-			SSYNC();
 		} else if (iface->cur_mode == TWI_I2C_MODE_REPEAT &&
 		           iface->cur_msg + 1 < iface->msg_num) {
 			if (iface->pmsg[iface->cur_msg + 1].flags & I2C_M_RD)
@@ -148,44 +140,37 @@ static void bfin_twi_handle_interrupt(struct bfin_twi_iface *iface)
 			else
 				write_MASTER_CTL(iface,
 					(read_MASTER_CTL(iface) | RSTART) & ~MDIR);
-			SSYNC();
 		}
-		/* Clear interrupt source */
-		write_INT_STAT(iface, RCVSERV);
-		SSYNC();
 	}
 	if (twi_int_status & MERR) {
-		write_INT_STAT(iface, MERR);
 		write_INT_MASK(iface, 0);
 		write_MASTER_STAT(iface, 0x3e);
 		write_MASTER_CTL(iface, 0);
-		SSYNC();
 		iface->result = -EIO;
-		/* if both err and complete int stats are set, return proper
+
-		 * results.
+		if (mast_stat & LOSTARB)
+			dev_dbg(&iface->adap.dev, "Lost Arbitration\n");
+		if (mast_stat & ANAK)
+			dev_dbg(&iface->adap.dev, "Address Not Acknowledged\n");
+		if (mast_stat & DNAK)
+			dev_dbg(&iface->adap.dev, "Data Not Acknowledged\n");
+		if (mast_stat & BUFRDERR)
+			dev_dbg(&iface->adap.dev, "Buffer Read Error\n");
+		if (mast_stat & BUFWRERR)
+			dev_dbg(&iface->adap.dev, "Buffer Write Error\n");
+
+		/* If it is a quick transfer, only address without data,
+		 * not an err, return 1.
 		 */
-		if (twi_int_status & MCOMP) {
+		if (iface->cur_mode == TWI_I2C_MODE_STANDARD &&
-			write_INT_STAT(iface, MCOMP);
+			iface->transPtr == NULL &&
-			write_INT_MASK(iface, 0);
+			(twi_int_status & MCOMP) && (mast_stat & DNAK))
-			write_MASTER_CTL(iface, 0);
+			iface->result = 1;
-			SSYNC();
+
-			/* If it is a quick transfer, only address bug no data,
-			 * not an err, return 1.
-			 */
-			if (iface->writeNum == 0 && (mast_stat & BUFRDERR))
-				iface->result = 1;
-			/* If address not acknowledged return -1,
-			 * else return 0.
-			 */
-			else if (!(mast_stat & ANAK))
-				iface->result = 0;
-		}
 		complete(&iface->complete);
 		return;
 	}
 	if (twi_int_status & MCOMP) {
-		write_INT_STAT(iface, MCOMP);
-		SSYNC();
 		if (iface->cur_mode == TWI_I2C_MODE_COMBINED) {
 			if (iface->readNum == 0) {
 				/* set the read number to 1 and ask for manual
@@ -207,7 +192,6 @@ static void bfin_twi_handle_interrupt(struct bfin_twi_iface *iface)
 			/* remove restart bit and enable master receive */
 			write_MASTER_CTL(iface,
 				read_MASTER_CTL(iface) & ~RSTART);
-			SSYNC();
 		} else if (iface->cur_mode == TWI_I2C_MODE_REPEAT &&
 				iface->cur_msg+1 < iface->msg_num) {
 			iface->cur_msg++;
@@ -226,7 +210,6 @@ static void bfin_twi_handle_interrupt(struct bfin_twi_iface *iface)
 					write_XMT_DATA8(iface,
 						*(iface->transPtr++));
 					iface->writeNum--;
-					SSYNC();
 				}
 			}
 
@@ -244,15 +227,13 @@ static void bfin_twi_handle_interrupt(struct bfin_twi_iface *iface)
 			/* remove restart bit and enable master receive */
 			write_MASTER_CTL(iface,
 				read_MASTER_CTL(iface) & ~RSTART);
-			SSYNC();
 		} else {
 			iface->result = 1;
 			write_INT_MASK(iface, 0);
 			write_MASTER_CTL(iface, 0);
-			SSYNC();
-			complete(&iface->complete);
 		}
 	}
+	complete(&iface->complete);
 }
 
 /* Interrupt handler */
@@ -260,38 +241,26 @@ static irqreturn_t bfin_twi_interrupt_entry(int irq, void *dev_id)
 {
 	struct bfin_twi_iface *iface = dev_id;
 	unsigned long flags;
+	unsigned short twi_int_status;
 
 	spin_lock_irqsave(&iface->lock, flags);
-	del_timer(&iface->timeout_timer);
+	while (1) {
-	bfin_twi_handle_interrupt(iface);
+		twi_int_status = read_INT_STAT(iface);
+		if (!twi_int_status)
+			break;
+		/* Clear interrupt status */
+		write_INT_STAT(iface, twi_int_status);
+		bfin_twi_handle_interrupt(iface, twi_int_status);
+		SSYNC();
+	}
 	spin_unlock_irqrestore(&iface->lock, flags);
 	return IRQ_HANDLED;
 }
 
-static void bfin_twi_timeout(unsigned long data)
-{
-	struct bfin_twi_iface *iface = (struct bfin_twi_iface *)data;
-	unsigned long flags;
-
-	spin_lock_irqsave(&iface->lock, flags);
-	bfin_twi_handle_interrupt(iface);
-	if (iface->result == 0) {
-		iface->timeout_count--;
-		if (iface->timeout_count > 0) {
-			iface->timeout_timer.expires = jiffies + POLL_TIMEOUT;
-			add_timer(&iface->timeout_timer);
-		} else {
-			iface->result = -1;
-			complete(&iface->complete);
-		}
-	}
-	spin_unlock_irqrestore(&iface->lock, flags);
-}
-
 /*
- * Generic i2c master transfer entrypoint
+ * One i2c master transfer
  */
-static int bfin_twi_master_xfer(struct i2c_adapter *adap,
+static int bfin_twi_do_master_xfer(struct i2c_adapter *adap,
 				struct i2c_msg *msgs, int num)
 {
 	struct bfin_twi_iface *iface = adap->algo_data;
@@ -319,7 +288,6 @@ static int bfin_twi_master_xfer(struct i2c_adapter *adap,
 	iface->transPtr = pmsg->buf;
 	iface->writeNum = iface->readNum = pmsg->len;
 	iface->result = 0;
-	iface->timeout_count = 10;
 	init_completion(&(iface->complete));
 	/* Set Transmit device address */
 	write_MASTER_ADDR(iface, pmsg->addr);
@@ -358,30 +326,41 @@ static int bfin_twi_master_xfer(struct i2c_adapter *adap,
 		iface->manual_stop = 1;
 	}
 
-	iface->timeout_timer.expires = jiffies + POLL_TIMEOUT;
-	add_timer(&iface->timeout_timer);
-
 	/* Master enable */
 	write_MASTER_CTL(iface, read_MASTER_CTL(iface) | MEN |
 		((iface->read_write == I2C_SMBUS_READ) ? MDIR : 0) |
 		((CONFIG_I2C_BLACKFIN_TWI_CLK_KHZ > 100) ? FAST : 0));
 	SSYNC();
 
-	wait_for_completion(&iface->complete);
+	while (!iface->result) {
+		if (!wait_for_completion_timeout(&iface->complete,
+			adap->timeout)) {
+			iface->result = -1;
+			dev_err(&adap->dev, "master transfer timeout\n");
+		}
+	}
 
-	rc = iface->result;
+	if (iface->result == 1)
-
+		rc = iface->cur_msg + 1;
-	if (rc == 1)
-		return num;
 	else
-		return rc;
+		rc = iface->result;
+
+	return rc;
 }
 
 /*
- * SMBus type transfer entrypoint
+ * Generic i2c master transfer entrypoint
  */
+static int bfin_twi_master_xfer(struct i2c_adapter *adap,
+				struct i2c_msg *msgs, int num)
+{
+	return bfin_twi_do_master_xfer(adap, msgs, num);
+}
 
-int bfin_twi_smbus_xfer(struct i2c_adapter *adap, u16 addr,
+/*
+ * One I2C SMBus transfer
+ */
+int bfin_twi_do_smbus_xfer(struct i2c_adapter *adap, u16 addr,
 			unsigned short flags, char read_write,
 			u8 command, int size, union i2c_smbus_data *data)
 {
@@ -469,7 +448,6 @@ int bfin_twi_smbus_xfer(struct i2c_adapter *adap, u16 addr,
 	iface->manual_stop = 0;
 	iface->read_write = read_write;
 	iface->command = command;
-	iface->timeout_count = 10;
 	init_completion(&(iface->complete));
 
 	/* FIFO Initiation. Data in FIFO should be discarded before
@@ -486,9 +464,6 @@ int bfin_twi_smbus_xfer(struct i2c_adapter *adap, u16 addr,
 	write_MASTER_ADDR(iface, addr);
 	SSYNC();
 
-	iface->timeout_timer.expires = jiffies + POLL_TIMEOUT;
-	add_timer(&iface->timeout_timer);
-
 	switch (iface->cur_mode) {
 	case TWI_I2C_MODE_STANDARDSUB:
 		write_XMT_DATA8(iface, iface->command);
@@ -550,10 +525,8 @@ int bfin_twi_smbus_xfer(struct i2c_adapter *adap, u16 addr,
 				else if (iface->readNum > 255) {
 					write_MASTER_CTL(iface, 0xff << 6);
 					iface->manual_stop = 1;
-				} else {
+				} else
-					del_timer(&iface->timeout_timer);
 					break;
-				}
 			}
 		}
 		write_INT_MASK(iface, MCOMP | MERR |
@@ -569,13 +542,30 @@ int bfin_twi_smbus_xfer(struct i2c_adapter *adap, u16 addr,
 	}
 	SSYNC();
 
-	wait_for_completion(&iface->complete);
+	while (!iface->result) {
+		if (!wait_for_completion_timeout(&iface->complete,
+			adap->timeout)) {
+			iface->result = -1;
+			dev_err(&adap->dev, "smbus transfer timeout\n");
+		}
+	}
 
 	rc = (iface->result >= 0) ? 0 : -1;
 
 	return rc;
 }
 
+/*
+ * Generic I2C SMBus transfer entrypoint
+ */
+int bfin_twi_smbus_xfer(struct i2c_adapter *adap, u16 addr,
+			unsigned short flags, char read_write,
+			u8 command, int size, union i2c_smbus_data *data)
+{
+	return bfin_twi_do_smbus_xfer(adap, addr, flags,
+			read_write, command, size, data);
+}
+
 /*
  * Return what the adapter supports
  */
@@ -667,10 +657,6 @@ static int i2c_bfin_twi_probe(struct platform_device *pdev)
 		goto out_error_no_irq;
 	}
 
-	init_timer(&(iface->timeout_timer));
-	iface->timeout_timer.function = bfin_twi_timeout;
-	iface->timeout_timer.data = (unsigned long)iface;
-
 	p_adap = &iface->adap;
 	p_adap->nr = pdev->id;
 	strlcpy(p_adap->name, pdev->name, sizeof(p_adap->name));
@@ -678,6 +664,8 @@ static int i2c_bfin_twi_probe(struct platform_device *pdev)
 	p_adap->algo_data = iface;
 	p_adap->class = I2C_CLASS_HWMON | I2C_CLASS_SPD;
 	p_adap->dev.parent = &pdev->dev;
+	p_adap->timeout = 5 * HZ;
+	p_adap->retries = 3;
 
 	rc = peripheral_request_list(pin_req[pdev->id], "i2c-bfin-twi");
 	if (rc) {

drivers/i2c/busses/i2c-cpm.c

@@ -441,7 +441,7 @@ static int __devinit cpm_i2c_setup(struct cpm_i2c *cpm)
 	init_waitqueue_head(&cpm->i2c_wait);
 
 	cpm->irq = of_irq_to_resource(ofdev->node, 0, NULL);
-	if (cpm->irq == NO_IRQ)
+	if (!cpm->irq)
 		return -EINVAL;
 
 	/* Install interrupt handler. */

drivers/i2c/busses/i2c-highlander.c

@@ -282,7 +282,6 @@ static int highlander_i2c_smbus_xfer(struct i2c_adapter *adap, u16 addr,
 				  union i2c_smbus_data *data)
 {
 	struct highlander_i2c_dev *dev = i2c_get_adapdata(adap);
-	int read = read_write & I2C_SMBUS_READ;
 	u16 tmp;
 
 	init_completion(&dev->cmd_complete);
@@ -337,11 +336,11 @@ static int highlander_i2c_smbus_xfer(struct i2c_adapter *adap, u16 addr,
 	highlander_i2c_done(dev);
 
 	/* Set slave address */
-	iowrite16((addr << 1) | read, dev->base + SMSMADR);
+	iowrite16((addr << 1) | read_write, dev->base + SMSMADR);
 
 	highlander_i2c_command(dev, command, dev->buf_len);
 
-	if (read)
+	if (read_write == I2C_SMBUS_READ)
 		return highlander_i2c_read(dev);
 	else
 		return highlander_i2c_write(dev);

drivers/i2c/busses/i2c-ibm_iic.c

@@ -668,12 +668,12 @@ static int __devinit iic_request_irq(struct of_device *ofdev,
 	int irq;
 
 	if (iic_force_poll)
-		return NO_IRQ;
+		return 0;
 
 	irq = irq_of_parse_and_map(np, 0);
-	if (irq == NO_IRQ) {
+	if (!irq) {
 		dev_err(&ofdev->dev, "irq_of_parse_and_map failed\n");
-		return NO_IRQ;
+		return 0;
 	}
 
 	/* Disable interrupts until we finish initialization, assumes
@@ -683,7 +683,7 @@ static int __devinit iic_request_irq(struct of_device *ofdev,
 	if (request_irq(irq, iic_handler, 0, "IBM IIC", dev)) {
 		dev_err(&ofdev->dev, "request_irq %d failed\n", irq);
 		/* Fallback to the polling mode */
-		return NO_IRQ;
+		return 0;
 	}
 
 	return irq;
@@ -719,7 +719,7 @@ static int __devinit iic_probe(struct of_device *ofdev,
 	init_waitqueue_head(&dev->wq);
 
 	dev->irq = iic_request_irq(ofdev, dev);
-	if (dev->irq == NO_IRQ)
+	if (!dev->irq)
 		dev_warn(&ofdev->dev, "using polling mode\n");
 
 	/* Board specific settings */
@@ -766,7 +766,7 @@ static int __devinit iic_probe(struct of_device *ofdev,
 	return 0;
 
 error_cleanup:
-	if (dev->irq != NO_IRQ) {
+	if (dev->irq) {
 		iic_interrupt_mode(dev, 0);
 		free_irq(dev->irq, dev);
 	}
@@ -790,7 +790,7 @@ static int __devexit iic_remove(struct of_device *ofdev)
 
 	i2c_del_adapter(&dev->adap);
 
-	if (dev->irq != NO_IRQ) {
+	if (dev->irq) {
 		iic_interrupt_mode(dev, 0);
 		free_irq(dev->irq, dev);
 	}

drivers/i2c/busses/i2c-mpc.c

@@ -118,7 +118,7 @@ static int i2c_wait(struct mpc_i2c *i2c, unsigned timeout, int writing)
 	u32 x;
 	int result = 0;
 
-	if (i2c->irq == NO_IRQ) {
+	if (!i2c->irq) {
 		while (!(readb(i2c->base + MPC_I2C_SR) & CSR_MIF)) {
 			schedule();
 			if (time_after(jiffies, orig_jiffies + timeout)) {
@@ -568,7 +568,7 @@ static int __devinit fsl_i2c_probe(struct of_device *op,
 	}
 
 	i2c->irq = irq_of_parse_and_map(op->node, 0);
-	if (i2c->irq != NO_IRQ) { /* i2c->irq = NO_IRQ implies polling */
+	if (i2c->irq) { /* no i2c->irq implies polling */
 		result = request_irq(i2c->irq, mpc_i2c_isr,
 				     IRQF_SHARED, "i2c-mpc", i2c);
 		if (result < 0) {
@@ -627,7 +627,7 @@ static int __devexit fsl_i2c_remove(struct of_device *op)
 	i2c_del_adapter(&i2c->adap);
 	dev_set_drvdata(&op->dev, NULL);
 
-	if (i2c->irq != NO_IRQ)
+	if (i2c->irq)
 		free_irq(i2c->irq, i2c);
 
 	irq_dispose_mapping(i2c->irq);

drivers/i2c/busses/i2c-nomadik.c

@@ -704,7 +704,8 @@ static irqreturn_t i2c_irq_handler(int irq, void *arg)
 	case I2C_IT_MTD:
 	case I2C_IT_MTDWS:
 		if (dev->cli.operation == I2C_READ) {
-			while (!readl(dev->virtbase + I2C_RISR) & I2C_IT_RXFE) {
+			while (!(readl(dev->virtbase + I2C_RISR)
+				 & I2C_IT_RXFE)) {
 				if (dev->cli.count == 0)
 					break;
 				*dev->cli.buffer =
@@ -914,6 +915,7 @@ static int __devinit nmk_i2c_probe(struct platform_device *pdev)
 
 static int __devexit nmk_i2c_remove(struct platform_device *pdev)
 {
+	struct resource *res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
 	struct nmk_i2c_dev *dev = platform_get_drvdata(pdev);
 
 	i2c_del_adapter(&dev->adap);
@@ -924,6 +926,8 @@ static int __devexit nmk_i2c_remove(struct platform_device *pdev)
 	i2c_clr_bit(dev->virtbase + I2C_CR, I2C_CR_PE);
 	free_irq(dev->irq, dev);
 	iounmap(dev->virtbase);
+	if (res)
+		release_mem_region(res->start, resource_size(res));
 	clk_disable(dev->clk);
 	clk_put(dev->clk);
 	platform_set_drvdata(pdev, NULL);

drivers/i2c/busses/i2c-omap.c

@@ -38,6 +38,7 @@
 #include <linux/clk.h>
 #include <linux/io.h>
 #include <linux/slab.h>
+#include <linux/i2c-omap.h>
 
 /* I2C controller revisions */
 #define OMAP_I2C_REV_2			0x20
@@ -45,29 +46,37 @@
 /* I2C controller revisions present on specific hardware */
 #define OMAP_I2C_REV_ON_2430		0x36
 #define OMAP_I2C_REV_ON_3430		0x3C
+#define OMAP_I2C_REV_ON_4430		0x40
 
 /* timeout waiting for the controller to respond */
 #define OMAP_I2C_TIMEOUT (msecs_to_jiffies(1000))
 
-#define OMAP_I2C_REV_REG		0x00
-#define OMAP_I2C_IE_REG			0x01
-#define OMAP_I2C_STAT_REG		0x02
-#define OMAP_I2C_IV_REG			0x03
 /* For OMAP3 I2C_IV has changed to I2C_WE (wakeup enable) */
-#define OMAP_I2C_WE_REG			0x03
+enum {
-#define OMAP_I2C_SYSS_REG		0x04
+	OMAP_I2C_REV_REG = 0,
-#define OMAP_I2C_BUF_REG		0x05
+	OMAP_I2C_IE_REG,
-#define OMAP_I2C_CNT_REG		0x06
+	OMAP_I2C_STAT_REG,
-#define OMAP_I2C_DATA_REG		0x07
+	OMAP_I2C_IV_REG,
-#define OMAP_I2C_SYSC_REG		0x08
+	OMAP_I2C_WE_REG,
-#define OMAP_I2C_CON_REG		0x09
+	OMAP_I2C_SYSS_REG,
-#define OMAP_I2C_OA_REG			0x0a
+	OMAP_I2C_BUF_REG,
-#define OMAP_I2C_SA_REG			0x0b
+	OMAP_I2C_CNT_REG,
-#define OMAP_I2C_PSC_REG		0x0c
+	OMAP_I2C_DATA_REG,
-#define OMAP_I2C_SCLL_REG		0x0d
+	OMAP_I2C_SYSC_REG,
-#define OMAP_I2C_SCLH_REG		0x0e
+	OMAP_I2C_CON_REG,
-#define OMAP_I2C_SYSTEST_REG		0x0f
+	OMAP_I2C_OA_REG,
-#define OMAP_I2C_BUFSTAT_REG		0x10
+	OMAP_I2C_SA_REG,
+	OMAP_I2C_PSC_REG,
+	OMAP_I2C_SCLL_REG,
+	OMAP_I2C_SCLH_REG,
+	OMAP_I2C_SYSTEST_REG,
+	OMAP_I2C_BUFSTAT_REG,
+	OMAP_I2C_REVNB_LO,
+	OMAP_I2C_REVNB_HI,
+	OMAP_I2C_IRQSTATUS_RAW,
+	OMAP_I2C_IRQENABLE_SET,
+	OMAP_I2C_IRQENABLE_CLR,
+};
 
 /* I2C Interrupt Enable Register (OMAP_I2C_IE): */
 #define OMAP_I2C_IE_XDR		(1 << 14)	/* TX Buffer drain int enable */
@@ -157,6 +166,9 @@
 #define SYSC_IDLEMODE_SMART		0x2
 #define SYSC_CLOCKACTIVITY_FCLK		0x2
 
+/* Errata definitions */
+#define I2C_OMAP_ERRATA_I207		(1 << 0)
+#define I2C_OMAP3_1P153			(1 << 1)
 
 struct omap_i2c_dev {
 	struct device		*dev;
@@ -167,9 +179,13 @@ struct omap_i2c_dev {
 	struct clk		*fclk;		/* Functional clock */
 	struct completion	cmd_complete;
 	struct resource		*ioarea;
+	u32			latency;	/* maximum mpu wkup latency */
+	void			(*set_mpu_wkup_lat)(struct device *dev,
+						    long latency);
 	u32			speed;		/* Speed of bus in Khz */
 	u16			cmd_err;
 	u8			*buf;
+	u8			*regs;
 	size_t			buf_len;
 	struct i2c_adapter	adapter;
 	u8			fifo_size;	/* use as flag and value
@@ -186,17 +202,67 @@ struct omap_i2c_dev {
 	u16			bufstate;
 	u16			syscstate;
 	u16			westate;
+	u16			errata;
+};
+
+const static u8 reg_map[] = {
+	[OMAP_I2C_REV_REG] = 0x00,
+	[OMAP_I2C_IE_REG] = 0x01,
+	[OMAP_I2C_STAT_REG] = 0x02,
+	[OMAP_I2C_IV_REG] = 0x03,
+	[OMAP_I2C_WE_REG] = 0x03,
+	[OMAP_I2C_SYSS_REG] = 0x04,
+	[OMAP_I2C_BUF_REG] = 0x05,
+	[OMAP_I2C_CNT_REG] = 0x06,
+	[OMAP_I2C_DATA_REG] = 0x07,
+	[OMAP_I2C_SYSC_REG] = 0x08,
+	[OMAP_I2C_CON_REG] = 0x09,
+	[OMAP_I2C_OA_REG] = 0x0a,
+	[OMAP_I2C_SA_REG] = 0x0b,
+	[OMAP_I2C_PSC_REG] = 0x0c,
+	[OMAP_I2C_SCLL_REG] = 0x0d,
+	[OMAP_I2C_SCLH_REG] = 0x0e,
+	[OMAP_I2C_SYSTEST_REG] = 0x0f,
+	[OMAP_I2C_BUFSTAT_REG] = 0x10,
+};
+
+const static u8 omap4_reg_map[] = {
+	[OMAP_I2C_REV_REG] = 0x04,
+	[OMAP_I2C_IE_REG] = 0x2c,
+	[OMAP_I2C_STAT_REG] = 0x28,
+	[OMAP_I2C_IV_REG] = 0x34,
+	[OMAP_I2C_WE_REG] = 0x34,
+	[OMAP_I2C_SYSS_REG] = 0x90,
+	[OMAP_I2C_BUF_REG] = 0x94,
+	[OMAP_I2C_CNT_REG] = 0x98,
+	[OMAP_I2C_DATA_REG] = 0x9c,
+	[OMAP_I2C_SYSC_REG] = 0x20,
+	[OMAP_I2C_CON_REG] = 0xa4,
+	[OMAP_I2C_OA_REG] = 0xa8,
+	[OMAP_I2C_SA_REG] = 0xac,
+	[OMAP_I2C_PSC_REG] = 0xb0,
+	[OMAP_I2C_SCLL_REG] = 0xb4,
+	[OMAP_I2C_SCLH_REG] = 0xb8,
+	[OMAP_I2C_SYSTEST_REG] = 0xbC,
+	[OMAP_I2C_BUFSTAT_REG] = 0xc0,
+	[OMAP_I2C_REVNB_LO] = 0x00,
+	[OMAP_I2C_REVNB_HI] = 0x04,
+	[OMAP_I2C_IRQSTATUS_RAW] = 0x24,
+	[OMAP_I2C_IRQENABLE_SET] = 0x2c,
+	[OMAP_I2C_IRQENABLE_CLR] = 0x30,
 };
 
 static inline void omap_i2c_write_reg(struct omap_i2c_dev *i2c_dev,
 				      int reg, u16 val)
 {
-	__raw_writew(val, i2c_dev->base + (reg << i2c_dev->reg_shift));
+	__raw_writew(val, i2c_dev->base +
+			(i2c_dev->regs[reg] << i2c_dev->reg_shift));
 }
 
 static inline u16 omap_i2c_read_reg(struct omap_i2c_dev *i2c_dev, int reg)
 {
-	return __raw_readw(i2c_dev->base + (reg << i2c_dev->reg_shift));
+	return __raw_readw(i2c_dev->base +
+				(i2c_dev->regs[reg] << i2c_dev->reg_shift));
 }
 
 static int __init omap_i2c_get_clocks(struct omap_i2c_dev *dev)
@@ -265,7 +331,11 @@ static void omap_i2c_idle(struct omap_i2c_dev *dev)
 	WARN_ON(dev->idle);
 
 	dev->iestate = omap_i2c_read_reg(dev, OMAP_I2C_IE_REG);
-	omap_i2c_write_reg(dev, OMAP_I2C_IE_REG, 0);
+	if (dev->rev >= OMAP_I2C_REV_ON_4430)
+		omap_i2c_write_reg(dev, OMAP_I2C_IRQENABLE_CLR, 1);
+	else
+		omap_i2c_write_reg(dev, OMAP_I2C_IE_REG, 0);
+
 	if (dev->rev < OMAP_I2C_REV_2) {
 		iv = omap_i2c_read_reg(dev, OMAP_I2C_IV_REG); /* Read clears */
 	} else {
@@ -330,7 +400,9 @@ static int omap_i2c_init(struct omap_i2c_dev *dev)
 			 * REVISIT: Some wkup sources might not be needed.
 			 */
 			dev->westate = OMAP_I2C_WE_ALL;
-			omap_i2c_write_reg(dev, OMAP_I2C_WE_REG, dev->westate);
+			if (dev->rev < OMAP_I2C_REV_ON_4430)
+				omap_i2c_write_reg(dev, OMAP_I2C_WE_REG,
+								dev->westate);
 		}
 	}
 	omap_i2c_write_reg(dev, OMAP_I2C_CON_REG, 0);
@@ -357,7 +429,7 @@ static int omap_i2c_init(struct omap_i2c_dev *dev)
 			psc = fclk_rate / 12000000;
 	}
 
-	if (cpu_is_omap2430() || cpu_is_omap34xx()) {
+	if (!(cpu_class_is_omap1() || cpu_is_omap2420())) {
 
 		/*
 		 * HSI2C controller internal clk rate should be 19.2 Mhz for
@@ -430,6 +502,11 @@ static int omap_i2c_init(struct omap_i2c_dev *dev)
 	/* Take the I2C module out of reset: */
 	omap_i2c_write_reg(dev, OMAP_I2C_CON_REG, OMAP_I2C_CON_EN);
 
+	dev->errata = 0;
+
+	if (cpu_is_omap2430() || cpu_is_omap34xx())
+		dev->errata |= I2C_OMAP_ERRATA_I207;
+
 	/* Enable interrupts */
 	dev->iestate = (OMAP_I2C_IE_XRDY | OMAP_I2C_IE_RRDY |
 			OMAP_I2C_IE_ARDY | OMAP_I2C_IE_NACK |
@@ -539,8 +616,12 @@ static int omap_i2c_xfer_msg(struct i2c_adapter *adap,
 	 * REVISIT: We should abort the transfer on signals, but the bus goes
 	 * into arbitration and we're currently unable to recover from it.
 	 */
+	if (dev->set_mpu_wkup_lat != NULL)
+		dev->set_mpu_wkup_lat(dev->dev, dev->latency);
 	r = wait_for_completion_timeout(&dev->cmd_complete,
 					OMAP_I2C_TIMEOUT);
+	if (dev->set_mpu_wkup_lat != NULL)
+		dev->set_mpu_wkup_lat(dev->dev, -1);
 	dev->buf_len = 0;
 	if (r < 0)
 		return r;
@@ -623,6 +704,34 @@ omap_i2c_ack_stat(struct omap_i2c_dev *dev, u16 stat)
 	omap_i2c_write_reg(dev, OMAP_I2C_STAT_REG, stat);
 }
 
+static inline void i2c_omap_errata_i207(struct omap_i2c_dev *dev, u16 stat)
+{
+	/*
+	 * I2C Errata(Errata Nos. OMAP2: 1.67, OMAP3: 1.8)
+	 * Not applicable for OMAP4.
+	 * Under certain rare conditions, RDR could be set again
+	 * when the bus is busy, then ignore the interrupt and
+	 * clear the interrupt.
+	 */
+	if (stat & OMAP_I2C_STAT_RDR) {
+		/* Step 1: If RDR is set, clear it */
+		omap_i2c_ack_stat(dev, OMAP_I2C_STAT_RDR);
+
+		/* Step 2: */
+		if (!(omap_i2c_read_reg(dev, OMAP_I2C_STAT_REG)
+						& OMAP_I2C_STAT_BB)) {
+
+			/* Step 3: */
+			if (omap_i2c_read_reg(dev, OMAP_I2C_STAT_REG)
+						& OMAP_I2C_STAT_RDR) {
+				omap_i2c_ack_stat(dev, OMAP_I2C_STAT_RDR);
+				dev_dbg(dev->dev, "RDR when bus is busy.\n");
+			}
+
+		}
+	}
+}
+
 /* rev1 devices are apparently only on some 15xx */
 #ifdef CONFIG_ARCH_OMAP15XX
 
@@ -684,6 +793,35 @@ omap_i2c_rev1_isr(int this_irq, void *dev_id)
 #define omap_i2c_rev1_isr		NULL
 #endif
 
+/*
+ * OMAP3430 Errata 1.153: When an XRDY/XDR is hit, wait for XUDF before writing
+ * data to DATA_REG. Otherwise some data bytes can be lost while transferring
+ * them from the memory to the I2C interface.
+ */
+static int errata_omap3_1p153(struct omap_i2c_dev *dev, u16 *stat, int *err)
+{
+	unsigned long timeout = 10000;
+
+	while (--timeout && !(*stat & OMAP_I2C_STAT_XUDF)) {
+		if (*stat & (OMAP_I2C_STAT_NACK | OMAP_I2C_STAT_AL)) {
+			omap_i2c_ack_stat(dev, *stat & (OMAP_I2C_STAT_XRDY |
+							OMAP_I2C_STAT_XDR));
+			*err |= OMAP_I2C_STAT_XUDF;
+			return -ETIMEDOUT;
+		}
+
+		cpu_relax();
+		*stat = omap_i2c_read_reg(dev, OMAP_I2C_STAT_REG);
+	}
+
+	if (!timeout) {
+		dev_err(dev->dev, "timeout waiting on XUDF bit\n");
+		return 0;
+	}
+
+	return 0;
+}
+
 static irqreturn_t
 omap_i2c_isr(int this_irq, void *dev_id)
 {
@@ -733,6 +871,10 @@ complete:
 		}
 		if (stat & (OMAP_I2C_STAT_RRDY | OMAP_I2C_STAT_RDR)) {
 			u8 num_bytes = 1;
+
+			if (dev->errata & I2C_OMAP_ERRATA_I207)
+				i2c_omap_errata_i207(dev, stat);
+
 			if (dev->fifo_size) {
 				if (stat & OMAP_I2C_STAT_RRDY)
 					num_bytes = dev->fifo_size;
@@ -747,9 +889,12 @@ complete:
 				if (dev->buf_len) {
 					*dev->buf++ = w;
 					dev->buf_len--;
-					/* Data reg from 2430 is 8 bit wide */
+					/*
-					if (!cpu_is_omap2430() &&
+					 * Data reg in 2430, omap3 and
-							!cpu_is_omap34xx()) {
+					 * omap4 is 8 bit wide
+					 */
+					if (cpu_class_is_omap1() ||
+							cpu_is_omap2420()) {
 						if (dev->buf_len) {
 							*dev->buf++ = w >> 8;
 							dev->buf_len--;
@@ -787,9 +932,12 @@ complete:
 				if (dev->buf_len) {
 					w = *dev->buf++;
 					dev->buf_len--;
-					/* Data reg from  2430 is 8 bit wide */
+					/*
-					if (!cpu_is_omap2430() &&
+					 * Data reg in 2430, omap3 and
-							!cpu_is_omap34xx()) {
+					 * omap4 is 8 bit wide
+					 */
+					if (cpu_class_is_omap1() ||
+							cpu_is_omap2420()) {
 						if (dev->buf_len) {
 							w |= *dev->buf++ << 8;
 							dev->buf_len--;
@@ -807,25 +955,9 @@ complete:
 					break;
 				}
 
-				/*
+				if ((dev->errata & I2C_OMAP3_1P153) &&
-				 * OMAP3430 Errata 1.153: When an XRDY/XDR
+				    errata_omap3_1p153(dev, &stat, &err))
-				 * is hit, wait for XUDF before writing data
+					goto complete;
-				 * to DATA_REG. Otherwise some data bytes can
-				 * be lost while transferring them from the
-				 * memory to the I2C interface.
-				 */
-
-				if (dev->rev <= OMAP_I2C_REV_ON_3430) {
-						while (!(stat & OMAP_I2C_STAT_XUDF)) {
-							if (stat & (OMAP_I2C_STAT_NACK | OMAP_I2C_STAT_AL)) {
-								omap_i2c_ack_stat(dev, stat & (OMAP_I2C_STAT_XRDY | OMAP_I2C_STAT_XDR));
-								err |= OMAP_I2C_STAT_XUDF;
-								goto complete;
-							}
-							cpu_relax();
-							stat = omap_i2c_read_reg(dev, OMAP_I2C_STAT_REG);
-						}
-				}
 
 				omap_i2c_write_reg(dev, OMAP_I2C_DATA_REG, w);
 			}
@@ -857,6 +989,7 @@ omap_i2c_probe(struct platform_device *pdev)
 	struct omap_i2c_dev	*dev;
 	struct i2c_adapter	*adap;
 	struct resource		*mem, *irq, *ioarea;
+	struct omap_i2c_bus_platform_data *pdata = pdev->dev.platform_data;
 	irq_handler_t isr;
 	int r;
 	u32 speed = 0;
@@ -886,10 +1019,13 @@ omap_i2c_probe(struct platform_device *pdev)
 		goto err_release_region;
 	}
 
-	if (pdev->dev.platform_data != NULL)
+	if (pdata != NULL) {
-		speed = *(u32 *)pdev->dev.platform_data;
+		speed = pdata->clkrate;
-	else
+		dev->set_mpu_wkup_lat = pdata->set_mpu_wkup_lat;
-		speed = 100;	/* Defualt speed */
+	} else {
+		speed = 100;	/* Default speed */
+		dev->set_mpu_wkup_lat = NULL;
+	}
 
 	dev->speed = speed;
 	dev->idle = 1;
@@ -905,17 +1041,27 @@ omap_i2c_probe(struct platform_device *pdev)
 
 	if (cpu_is_omap7xx())
 		dev->reg_shift = 1;
+	else if (cpu_is_omap44xx())
+		dev->reg_shift = 0;
 	else
 		dev->reg_shift = 2;
 
 	if ((r = omap_i2c_get_clocks(dev)) != 0)
 		goto err_iounmap;
 
+	if (cpu_is_omap44xx())
+		dev->regs = (u8 *) omap4_reg_map;
+	else
+		dev->regs = (u8 *) reg_map;
+
 	omap_i2c_unidle(dev);
 
 	dev->rev = omap_i2c_read_reg(dev, OMAP_I2C_REV_REG) & 0xff;
 
-	if (cpu_is_omap2430() || cpu_is_omap34xx()) {
+	if (dev->rev <= OMAP_I2C_REV_ON_3430)
+		dev->errata |= I2C_OMAP3_1P153;
+
+	if (!(cpu_class_is_omap1() || cpu_is_omap2420())) {
 		u16 s;
 
 		/* Set up the fifo size - Get total size */
@@ -927,8 +1073,17 @@ omap_i2c_probe(struct platform_device *pdev)
 		 * size. This is to ensure that we can handle the status on int
 		 * call back latencies.
 		 */
-		dev->fifo_size = (dev->fifo_size / 2);
+		if (dev->rev >= OMAP_I2C_REV_ON_4430) {
-		dev->b_hw = 1; /* Enable hardware fixes */
+			dev->fifo_size = 0;
+			dev->b_hw = 0; /* Disable hardware fixes */
+		} else {
+			dev->fifo_size = (dev->fifo_size / 2);
+			dev->b_hw = 1; /* Enable hardware fixes */
+		}
+		/* calculate wakeup latency constraint for MPU */
+		if (dev->set_mpu_wkup_lat != NULL)
+			dev->latency = (1000000 * dev->fifo_size) /
+				       (1000 * speed / 8);
 	}
 
 	/* reset ASAP, clearing any IRQs */

drivers/i2c/busses/i2c-pxa.c

@@ -209,18 +209,6 @@ static void i2c_pxa_show_state(struct pxa_i2c *i2c, int lno, const char *fname)
 }
 
 #define show_state(i2c) i2c_pxa_show_state(i2c, __LINE__, __func__)
-#else
-#define i2c_debug	0
-
-#define show_state(i2c) do { } while (0)
-#define decode_ISR(val) do { } while (0)
-#define decode_ICR(val) do { } while (0)
-#endif
-
-#define eedbg(lvl, x...) do { if ((lvl) < 1) { printk(KERN_DEBUG "" x); } } while(0)
-
-static void i2c_pxa_master_complete(struct pxa_i2c *i2c, int ret);
-static irqreturn_t i2c_pxa_handler(int this_irq, void *dev_id);
 
 static void i2c_pxa_scream_blue_murder(struct pxa_i2c *i2c, const char *why)
 {
@@ -236,6 +224,20 @@ static void i2c_pxa_scream_blue_murder(struct pxa_i2c *i2c, const char *why)
 	printk("\n");
 }
 
+#else /* ifdef DEBUG */
+
+#define i2c_debug	0
+
+#define show_state(i2c) do { } while (0)
+#define decode_ISR(val) do { } while (0)
+#define decode_ICR(val) do { } while (0)
+#define i2c_pxa_scream_blue_murder(i2c, why) do { } while (0)
+
+#endif /* ifdef DEBUG / else */
+
+static void i2c_pxa_master_complete(struct pxa_i2c *i2c, int ret);
+static irqreturn_t i2c_pxa_handler(int this_irq, void *dev_id);
+
 static inline int i2c_pxa_is_slavemode(struct pxa_i2c *i2c)
 {
 	return !(readl(_ICR(i2c)) & ICR_SCLE);

drivers/i2c/busses/i2c-s3c2410.c

@@ -482,7 +482,8 @@ static int s3c24xx_i2c_set_master(struct s3c24xx_i2c *i2c)
 static int s3c24xx_i2c_doxfer(struct s3c24xx_i2c *i2c,
 			      struct i2c_msg *msgs, int num)
 {
-	unsigned long timeout;
+	unsigned long iicstat, timeout;
+	int spins = 20;
 	int ret;
 
 	if (i2c->suspended)
@@ -521,7 +522,21 @@ static int s3c24xx_i2c_doxfer(struct s3c24xx_i2c *i2c,
 
 	/* ensure the stop has been through the bus */
 
-	msleep(1);
+	dev_dbg(i2c->dev, "waiting for bus idle\n");
+
+	/* first, try busy waiting briefly */
+	do {
+		iicstat = readl(i2c->regs + S3C2410_IICSTAT);
+	} while ((iicstat & S3C2410_IICSTAT_START) && --spins);
+
+	/* if that timed out sleep */
+	if (!spins) {
+		msleep(1);
+		iicstat = readl(i2c->regs + S3C2410_IICSTAT);
+	}
+
+	if (iicstat & S3C2410_IICSTAT_START)
+		dev_warn(i2c->dev, "timeout waiting for bus idle\n");
 
  out:
 	return ret;

include/linux/i2c-omap.h

@@ -0,0 +1,9 @@
+#ifndef __I2C_OMAP_H__
+#define __I2C_OMAP_H__
+
+struct omap_i2c_bus_platform_data {
+	u32		clkrate;
+	void		(*set_mpu_wkup_lat)(struct device *dev, long set);
+};
+
+#endif