iv/linux
1
0
Fork 0
Code Issues Pull Requests Actions Packages Projects Releases Wiki Activity

drm/msm/dsi/pll: call vco set rate explicitly

Browse Source 
For a given byte clock, if VCO recalc value is exactly same as
vco set rate value, vco_set_rate does not get called assuming
VCO is already set to required value. But Due to GDSC toggle,
VCO values are erased in the HW. To make sure VCO is programmed
correctly, we forcefully call set_rate from vco_prepare.

Signed-off-by: Harigovindan P <harigovi@codeaurora.org>
Reviewed-by: Jeffrey Hugo <jeffrey.l.hugo@gmail.com>
Signed-off-by: Rob Clark <robdclark@chromium.org>
This commit is contained in:
Harigovindan P 2020-02-06 14:42:01 +05:30 committed by Rob Clark
parent a1028dcfd0
commit c6659785df
1 changed files with 6 additions and 0 deletions
Show Stats Download Patch File Download Diff File Expand all files Collapse all files

6
drivers/gpu/drm/msm/dsi/pll/dsi_pll_10nm.c
View File

@ -411,6 +411,12 @@ static int dsi_pll_10nm_vco_prepare(struct clk_hw *hw)
if (pll_10nm->slave)
dsi_pll_enable_pll_bias(pll_10nm->slave);
rc = dsi_pll_10nm_vco_set_rate(hw,pll_10nm->vco_current_rate, 0);
if (rc) {
pr_err("vco_set_rate failed, rc=%d\n", rc);
return rc;
}
/* Start PLL */
pll_write(pll_10nm->phy_cmn_mmio + REG_DSI_10nm_PHY_CMN_PLL_CNTRL,
0x01);