arm64: dts: qcom: sc7180: Add quackingstick dts files
Quackingstick is a trogdor-based board. These dts files are copies from the downstream Chrome OS 5.4 kernel, but with downstream bits removed. Signed-off-by: Joseph S. Barrera III <joebar@chromium.org> Tested-by: Stephen Boyd <swboyd@chromium.org> Reviewed-by: Douglas Anderson <dianders@chromium.org> Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org> Link: https://lore.kernel.org/r/20220625183538.v14.2.I0977b1a08830d0caa8bfb1bdedb4ecceac709a7f@changeid
This commit is contained in:
Joseph S. Barrera III
Bjorn Andersson
parent
e0ff30b23d
commit
c77a3d4a2b
@ -79,6 +79,8 @@ dtb-$(CONFIG_ARCH_QCOM) += sc7180-trogdor-pompom-r2.dtb
|
||||
dtb-$(CONFIG_ARCH_QCOM) += sc7180-trogdor-pompom-r2-lte.dtb
|
||||
dtb-$(CONFIG_ARCH_QCOM) += sc7180-trogdor-pompom-r3.dtb
|
||||
dtb-$(CONFIG_ARCH_QCOM) += sc7180-trogdor-pompom-r3-lte.dtb
|
||||
dtb-$(CONFIG_ARCH_QCOM) += sc7180-trogdor-quackingstick-r0.dtb
|
||||
dtb-$(CONFIG_ARCH_QCOM) += sc7180-trogdor-quackingstick-r0-lte.dtb
|
||||
dtb-$(CONFIG_ARCH_QCOM) += sc7180-trogdor-wormdingler-rev0-boe.dtb
|
||||
dtb-$(CONFIG_ARCH_QCOM) += sc7180-trogdor-wormdingler-rev0-inx.dtb
|
||||
dtb-$(CONFIG_ARCH_QCOM) += sc7180-trogdor-wormdingler-rev1-boe.dtb
|
||||
|
||||
@ -0,0 +1,38 @@
|
||||
// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
|
||||
/*
|
||||
* Google Quackingstick board device tree source
|
||||
*
|
||||
* Copyright 2021 Google LLC.
|
||||
*
|
||||
* SKU: 0x600 => 1536
|
||||
* - bits 11..8: Panel ID: 0x6 (AUO)
|
||||
*/
|
||||
|
||||
#include "sc7180-trogdor-quackingstick-r0.dts"
|
||||
#include "sc7180-trogdor-lte-sku.dtsi"
|
||||
|
||||
/ {
|
||||
model = "Google Quackingstick (rev0+) with LTE";
|
||||
compatible = "google,quackingstick-sku1536", "qcom,sc7180";
|
||||
};
|
||||
|
||||
&ap_sar_sensor {
|
||||
compatible = "semtech,sx9324";
|
||||
semtech,ph0-pin = <3 1 3>;
|
||||
semtech,ph1-pin = <2 1 2>;
|
||||
semtech,ph2-pin = <3 3 1>;
|
||||
semtech,ph3-pin = <1 3 3>;
|
||||
semtech,ph01-resolution = <1024>;
|
||||
semtech,ph23-resolution = <1024>;
|
||||
semtech,startup-sensor = <1>;
|
||||
semtech,ph01-proxraw-strength = <3>;
|
||||
semtech,ph23-proxraw-strength = <3>;
|
||||
semtech,avg-pos-strength = <256>;
|
||||
|
||||
/delete-property/ svdd-supply;
|
||||
vdd-supply = <&pp1800_prox>;
|
||||
};
|
||||
|
||||
&ap_sar_sensor_i2c {
|
||||
status = "okay";
|
||||
};
|
||||
26
arch/arm64/boot/dts/qcom/sc7180-trogdor-quackingstick-r0.dts
Normal file
26
arch/arm64/boot/dts/qcom/sc7180-trogdor-quackingstick-r0.dts
Normal file
@ -0,0 +1,26 @@
|
||||
// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
|
||||
/*
|
||||
* Google Quackingstick board device tree source
|
||||
*
|
||||
* Copyright 2021 Google LLC.
|
||||
*
|
||||
* SKU: 0x601 => 1537
|
||||
* - bits 11..8: Panel ID: 0x6 (AUO)
|
||||
*/
|
||||
|
||||
#include "sc7180-trogdor-quackingstick.dtsi"
|
||||
|
||||
/ {
|
||||
model = "Google Quackingstick (rev0+)";
|
||||
compatible = "google,quackingstick-sku1537", "qcom,sc7180";
|
||||
};
|
||||
|
||||
&dsi_phy {
|
||||
qcom,phy-rescode-offset-top = /bits/ 8 <(-13) (-13) (-13) (-13) (-13)>;
|
||||
qcom,phy-rescode-offset-bot = /bits/ 8 <(-13) (-13) (-13) (-13) (-13)>;
|
||||
qcom,phy-drive-ldo-level = <375>;
|
||||
};
|
||||
|
||||
&panel {
|
||||
compatible = "auo,b101uan08.3";
|
||||
};
|
||||
318
arch/arm64/boot/dts/qcom/sc7180-trogdor-quackingstick.dtsi
Normal file
318
arch/arm64/boot/dts/qcom/sc7180-trogdor-quackingstick.dtsi
Normal file
@ -0,0 +1,318 @@
|
||||
// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
|
||||
/*
|
||||
* Google Quackingstick board device tree source
|
||||
*
|
||||
* Copyright 2021 Google LLC.
|
||||
*/
|
||||
|
||||
/dts-v1/;
|
||||
|
||||
#include "sc7180-trogdor.dtsi"
|
||||
|
||||
/* This board only has 1 USB Type-C port. */
|
||||
/delete-node/ &usb_c1;
|
||||
|
||||
/ {
|
||||
ppvar_lcd: ppvar-lcd {
|
||||
compatible = "regulator-fixed";
|
||||
regulator-name = "ppvar_lcd";
|
||||
|
||||
gpio = <&tlmm 88 GPIO_ACTIVE_HIGH>;
|
||||
enable-active-high;
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&ppvar_lcd_en>;
|
||||
|
||||
vin-supply = <&pp5000_a>;
|
||||
};
|
||||
|
||||
v1p8_disp: v1p8-disp {
|
||||
compatible = "regulator-fixed";
|
||||
regulator-name = "v1p8_disp";
|
||||
|
||||
gpio = <&tlmm 86 GPIO_ACTIVE_HIGH>;
|
||||
enable-active-high;
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&pp1800_disp_on>;
|
||||
|
||||
vin-supply = <&pp3300_a>;
|
||||
};
|
||||
};
|
||||
|
||||
&backlight {
|
||||
pwms = <&cros_ec_pwm 0>;
|
||||
};
|
||||
|
||||
&camcc {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&dsi0 {
|
||||
panel: panel@0 {
|
||||
/* Compatible will be filled in per-board */
|
||||
reg = <0>;
|
||||
enable-gpios = <&tlmm 87 GPIO_ACTIVE_HIGH>;
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&lcd_rst>;
|
||||
avdd-supply = <&ppvar_lcd>;
|
||||
pp1800-supply = <&v1p8_disp>;
|
||||
pp3300-supply = <&pp3300_dx_edp>;
|
||||
backlight = <&backlight>;
|
||||
rotation = <270>;
|
||||
|
||||
ports {
|
||||
#address-cells = <1>;
|
||||
#size-cells = <0>;
|
||||
port@0 {
|
||||
reg = <0>;
|
||||
panel_in: endpoint {
|
||||
remote-endpoint = <&dsi0_out>;
|
||||
};
|
||||
};
|
||||
};
|
||||
};
|
||||
|
||||
ports {
|
||||
port@1 {
|
||||
endpoint {
|
||||
remote-endpoint = <&panel_in>;
|
||||
data-lanes = <0 1 2 3>;
|
||||
};
|
||||
};
|
||||
};
|
||||
};
|
||||
|
||||
&gpio_keys {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&i2c4 {
|
||||
status = "okay";
|
||||
clock-frequency = <400000>;
|
||||
|
||||
ap_ts: touchscreen@10 {
|
||||
compatible = "hid-over-i2c";
|
||||
reg = <0x10>;
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&ts_int_l>, <&ts_reset_l>;
|
||||
|
||||
interrupt-parent = <&tlmm>;
|
||||
interrupts = <9 IRQ_TYPE_LEVEL_LOW>;
|
||||
|
||||
post-power-on-delay-ms = <20>;
|
||||
hid-descr-addr = <0x0001>;
|
||||
|
||||
vdd-supply = <&pp3300_ts>;
|
||||
};
|
||||
};
|
||||
|
||||
&sdhc_2 {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&pp1800_uf_cam {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&pp1800_wf_cam {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&pp2800_uf_cam {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&pp2800_wf_cam {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
/*
|
||||
* No eDP on this board but it's logically the same signal so just give it
|
||||
* a new name and assign the proper GPIO.
|
||||
*/
|
||||
pp3300_disp_on: &pp3300_dx_edp {
|
||||
gpio = <&tlmm 67 GPIO_ACTIVE_HIGH>;
|
||||
};
|
||||
|
||||
/* PINCTRL - modifications to sc7180-trogdor.dtsi */
|
||||
|
||||
/*
|
||||
* No eDP on this board but it's logically the same signal so just give it
|
||||
* a new name and assign the proper GPIO.
|
||||
*/
|
||||
|
||||
tp_en: &en_pp3300_dx_edp {
|
||||
pinmux {
|
||||
pins = "gpio67";
|
||||
};
|
||||
|
||||
pinconf {
|
||||
pins = "gpio67";
|
||||
};
|
||||
};
|
||||
|
||||
/* PINCTRL - board-specific pinctrl */
|
||||
|
||||
&tlmm {
|
||||
gpio-line-names = "HUB_RST_L",
|
||||
"AP_RAM_ID0",
|
||||
"AP_SKU_ID2",
|
||||
"AP_RAM_ID1",
|
||||
"",
|
||||
"AP_RAM_ID2",
|
||||
"UF_CAM_EN",
|
||||
"WF_CAM_EN",
|
||||
"TS_RESET_L",
|
||||
"TS_INT_L",
|
||||
"",
|
||||
"",
|
||||
"AP_EDP_BKLTEN",
|
||||
"UF_CAM_MCLK",
|
||||
"WF_CAM_CLK",
|
||||
"EDP_BRIJ_I2C_SDA",
|
||||
"EDP_BRIJ_I2C_SCL",
|
||||
"UF_CAM_SDA",
|
||||
"UF_CAM_SCL",
|
||||
"WF_CAM_SDA",
|
||||
"WF_CAM_SCL",
|
||||
"",
|
||||
"",
|
||||
"AMP_EN",
|
||||
"P_SENSOR_INT_L",
|
||||
"AP_SAR_SENSOR_SDA",
|
||||
"AP_SAR_SENSOR_SCL",
|
||||
"",
|
||||
"HP_IRQ",
|
||||
"WF_CAM_RST_L",
|
||||
"UF_CAM_RST_L",
|
||||
"AP_BRD_ID2",
|
||||
"",
|
||||
"AP_BRD_ID0",
|
||||
"AP_H1_SPI_MISO",
|
||||
"AP_H1_SPI_MOSI",
|
||||
"AP_H1_SPI_CLK",
|
||||
"AP_H1_SPI_CS_L",
|
||||
"",
|
||||
"",
|
||||
"",
|
||||
"",
|
||||
"H1_AP_INT_ODL",
|
||||
"",
|
||||
"UART_AP_TX_DBG_RX",
|
||||
"UART_DBG_TX_AP_RX",
|
||||
"HP_I2C_SDA",
|
||||
"HP_I2C_SCL",
|
||||
"FORCED_USB_BOOT",
|
||||
"",
|
||||
"",
|
||||
"AMP_DIN",
|
||||
"PEN_DET_ODL",
|
||||
"HP_BCLK",
|
||||
"HP_LRCLK",
|
||||
"HP_DOUT",
|
||||
"HP_DIN",
|
||||
"HP_MCLK",
|
||||
"AP_SKU_ID0",
|
||||
"AP_EC_SPI_MISO",
|
||||
"AP_EC_SPI_MOSI",
|
||||
"AP_EC_SPI_CLK",
|
||||
"AP_EC_SPI_CS_L",
|
||||
"AP_SPI_CLK",
|
||||
"AP_SPI_MOSI",
|
||||
"AP_SPI_MISO",
|
||||
/*
|
||||
* AP_FLASH_WP_L is crossystem ABI. Schematics
|
||||
* call it BIOS_FLASH_WP_L.
|
||||
*/
|
||||
"AP_FLASH_WP_L",
|
||||
"EN_PP3300_DX_EDP",
|
||||
"AP_SPI_CS0_L",
|
||||
"SD_CD_ODL",
|
||||
"",
|
||||
"",
|
||||
"",
|
||||
"",
|
||||
"",
|
||||
"UIM2_DATA",
|
||||
"UIM2_CLK",
|
||||
"UIM2_RST",
|
||||
"UIM2_PRESENT_L",
|
||||
"UIM1_DATA",
|
||||
"UIM1_CLK",
|
||||
"UIM1_RST",
|
||||
"",
|
||||
"CODEC_PWR_EN",
|
||||
"HUB_EN",
|
||||
"",
|
||||
"PP1800_DISP_ON",
|
||||
"LCD_RST",
|
||||
"PPVAR_LCD_EN",
|
||||
"",
|
||||
"AP_SKU_ID1",
|
||||
"AP_RST_REQ",
|
||||
"",
|
||||
"AP_BRD_ID1",
|
||||
"AP_EC_INT_L",
|
||||
"",
|
||||
"",
|
||||
"",
|
||||
"",
|
||||
"",
|
||||
"",
|
||||
"",
|
||||
"",
|
||||
"",
|
||||
"",
|
||||
"",
|
||||
"",
|
||||
"",
|
||||
"",
|
||||
"",
|
||||
"",
|
||||
"",
|
||||
"",
|
||||
"",
|
||||
"",
|
||||
"AP_TS_I2C_SDA",
|
||||
"AP_TS_I2C_SCL",
|
||||
"DP_HOT_PLUG_DET",
|
||||
"EC_IN_RW_ODL";
|
||||
|
||||
lcd_rst: lcd-rst {
|
||||
pinmux {
|
||||
pins = "gpio87";
|
||||
function = "gpio";
|
||||
};
|
||||
|
||||
pinconf {
|
||||
pins = "gpio87";
|
||||
drive-strength = <2>;
|
||||
bias-disable;
|
||||
};
|
||||
};
|
||||
|
||||
ppvar_lcd_en: ppvar-lcd-en {
|
||||
pinmux {
|
||||
pins = "gpio88";
|
||||
function = "gpio";
|
||||
};
|
||||
|
||||
pinconf {
|
||||
pins = "gpio88";
|
||||
drive-strength = <2>;
|
||||
bias-disable;
|
||||
};
|
||||
};
|
||||
|
||||
pp1800_disp_on: pp1800-disp-on {
|
||||
pinmux {
|
||||
pins = "gpio86";
|
||||
function = "gpio";
|
||||
};
|
||||
|
||||
pinconf {
|
||||
pins = "gpio86";
|
||||
drive-strength = <2>;
|
||||
bias-disable;
|
||||
};
|
||||
};
|
||||
};
|
||||
Loading…
x
Reference in New Issue
Block a user