diff --git a/drivers/mmc/core/sd.c b/drivers/mmc/core/sd.c
index de7b5f8df550..2e687f1f4542 100644
--- a/drivers/mmc/core/sd.c
+++ b/drivers/mmc/core/sd.c
@@ -996,6 +996,177 @@ static bool mmc_sd_card_using_v18(struct mmc_card *card)
 	       (SD_MODE_UHS_SDR50 | SD_MODE_UHS_SDR104 | SD_MODE_UHS_DDR50);
 }
 
+static int sd_read_ext_reg(struct mmc_card *card, u8 fno, u8 page,
+			   u16 offset, u16 len, u8 *reg_buf)
+{
+	u32 cmd_args;
+
+	/*
+	 * Command arguments of CMD48:
+	 * [31:31] MIO (0 = memory).
+	 * [30:27] FNO (function number).
+	 * [26:26] reserved (0).
+	 * [25:18] page number.
+	 * [17:9] offset address.
+	 * [8:0] length (0 = 1 byte, 1ff = 512 bytes).
+	 */
+	cmd_args = fno << 27 | page << 18 | offset << 9 | (len -1);
+
+	return mmc_send_adtc_data(card, card->host, SD_READ_EXTR_SINGLE,
+				  cmd_args, reg_buf, 512);
+}
+
+static int sd_parse_ext_reg_power(struct mmc_card *card, u8 fno, u8 page,
+				  u16 offset)
+{
+	int err;
+	u8 *reg_buf;
+
+	reg_buf = kzalloc(512, GFP_KERNEL);
+	if (!reg_buf)
+		return -ENOMEM;
+
+	/* Read the extension register for power management function. */
+	err = sd_read_ext_reg(card, fno, page, offset, 512, reg_buf);
+	if (err) {
+		pr_warn("%s: error %d reading PM func of ext reg\n",
+			mmc_hostname(card->host), err);
+		goto out;
+	}
+
+	/* PM revision consists of 4 bits. */
+	card->ext_power.rev = reg_buf[0] & 0xf;
+
+	/* Power Off Notification support at bit 4. */
+	if (reg_buf[1] & BIT(4))
+		card->ext_power.feature_support |= SD_EXT_POWER_OFF_NOTIFY;
+
+	/* Power Sustenance support at bit 5. */
+	if (reg_buf[1] & BIT(5))
+		card->ext_power.feature_support |= SD_EXT_POWER_SUSTENANCE;
+
+	/* Power Down Mode support at bit 6. */
+	if (reg_buf[1] & BIT(6))
+		card->ext_power.feature_support |= SD_EXT_POWER_DOWN_MODE;
+
+	card->ext_power.fno = fno;
+	card->ext_power.page = page;
+	card->ext_power.offset = offset;
+
+out:
+	kfree(reg_buf);
+	return err;
+}
+
+static int sd_parse_ext_reg(struct mmc_card *card, u8 *gen_info_buf,
+			    u16 *next_ext_addr)
+{
+	u8 num_regs, fno, page;
+	u16 sfc, offset, ext = *next_ext_addr;
+	u32 reg_addr;
+
+	/*
+	 * Parse only one register set per extension, as that is sufficient to
+	 * support the standard functions. This means another 48 bytes in the
+	 * buffer must be available.
+	 */
+	if (ext + 48 > 512)
+		return -EFAULT;
+
+	/* Standard Function Code */
+	memcpy(&sfc, &gen_info_buf[ext], 2);
+
+	/* Address to the next extension. */
+	memcpy(next_ext_addr, &gen_info_buf[ext + 40], 2);
+
+	/* Number of registers for this extension. */
+	num_regs = gen_info_buf[ext + 42];
+
+	/* We support only one register per extension. */
+	if (num_regs != 1)
+		return 0;
+
+	/* Extension register address. */
+	memcpy(&reg_addr, &gen_info_buf[ext + 44], 4);
+
+	/* 9 bits (0 to 8) contains the offset address. */
+	offset = reg_addr & 0x1ff;
+
+	/* 8 bits (9 to 16) contains the page number. */
+	page = reg_addr >> 9 & 0xff ;
+
+	/* 4 bits (18 to 21) contains the function number. */
+	fno = reg_addr >> 18 & 0xf;
+
+	/* Standard Function Code for power management. */
+	if (sfc == 0x1)
+		return sd_parse_ext_reg_power(card, fno, page, offset);
+
+	return 0;
+}
+
+static int sd_read_ext_regs(struct mmc_card *card)
+{
+	int err, i;
+	u8 num_ext, *gen_info_buf;
+	u16 rev, len, next_ext_addr;
+
+	if (mmc_host_is_spi(card->host))
+		return 0;
+
+	if (!(card->scr.cmds & SD_SCR_CMD48_SUPPORT))
+		return 0;
+
+	gen_info_buf = kzalloc(512, GFP_KERNEL);
+	if (!gen_info_buf)
+		return -ENOMEM;
+
+	/*
+	 * Read 512 bytes of general info, which is found at function number 0,
+	 * at page 0 and with no offset.
+	 */
+	err = sd_read_ext_reg(card, 0, 0, 0, 512, gen_info_buf);
+	if (err) {
+		pr_warn("%s: error %d reading general info of SD ext reg\n",
+			mmc_hostname(card->host), err);
+		goto out;
+	}
+
+	/* General info structure revision. */
+	memcpy(&rev, &gen_info_buf[0], 2);
+
+	/* Length of general info in bytes. */
+	memcpy(&len, &gen_info_buf[2], 2);
+
+	/* Number of extensions to be find. */
+	num_ext = gen_info_buf[4];
+
+	/* We support revision 0, but limit it to 512 bytes for simplicity. */
+	if (rev != 0 || len > 512) {
+		pr_warn("%s: non-supported SD ext reg layout\n",
+			mmc_hostname(card->host));
+		goto out;
+	}
+
+	/*
+	 * Parse the extension registers. The first extension should start
+	 * immediately after the general info header (16 bytes).
+	 */
+	next_ext_addr = 16;
+	for (i = 0; i < num_ext; i++) {
+		err = sd_parse_ext_reg(card, gen_info_buf, &next_ext_addr);
+		if (err) {
+			pr_warn("%s: error %d parsing SD ext reg\n",
+				mmc_hostname(card->host), err);
+			goto out;
+		}
+	}
+
+out:
+	kfree(gen_info_buf);
+	return err;
+}
+
 /*
  * Handle the detection and initialisation of a card.
  *
@@ -1144,6 +1315,13 @@ retry:
 		}
 	}
 
+	if (!oldcard) {
+		/* Read/parse the extension registers. */
+		err = sd_read_ext_regs(card);
+		if (err)
+			goto free_card;
+	}
+
 	if (host->cqe_ops && !host->cqe_enabled) {
 		err = host->cqe_ops->cqe_enable(host, card);
 		if (!err) {
diff --git a/include/linux/mmc/card.h b/include/linux/mmc/card.h
index 858fc4d11240..03a862e93594 100644
--- a/include/linux/mmc/card.h
+++ b/include/linux/mmc/card.h
@@ -191,6 +191,18 @@ struct sd_switch_caps {
 #define SD_MAX_CURRENT_800	(1 << SD_SET_CURRENT_LIMIT_800)
 };
 
+struct sd_ext_reg {
+	u8			fno;
+	u8			page;
+	u16			offset;
+	u8			rev;
+	u8			feature_support;
+/* Power Management Function. */
+#define SD_EXT_POWER_OFF_NOTIFY	(1<<0)
+#define SD_EXT_POWER_SUSTENANCE	(1<<1)
+#define SD_EXT_POWER_DOWN_MODE	(1<<2)
+};
+
 struct sdio_cccr {
 	unsigned int		sdio_vsn;
 	unsigned int		sd_vsn;
@@ -292,6 +304,7 @@ struct mmc_card {
 	struct sd_scr		scr;		/* extra SD information */
 	struct sd_ssr		ssr;		/* yet more SD information */
 	struct sd_switch_caps	sw_caps;	/* switch (CMD6) caps */
+	struct sd_ext_reg	ext_power;	/* SD extension reg for PM */
 
 	unsigned int		sdio_funcs;	/* number of SDIO functions */
 	atomic_t		sdio_funcs_probed; /* number of probed SDIO funcs */
diff --git a/include/linux/mmc/sd.h b/include/linux/mmc/sd.h
index 2236aa540faa..43bfc5c39ad4 100644
--- a/include/linux/mmc/sd.h
+++ b/include/linux/mmc/sd.h
@@ -29,6 +29,9 @@
 #define SD_APP_OP_COND           41   /* bcr  [31:0] OCR         R3  */
 #define SD_APP_SEND_SCR          51   /* adtc                    R1  */
 
+  /* class 11 */
+#define SD_READ_EXTR_SINGLE      48   /* adtc [31:0]             R1  */
+
 /* OCR bit definitions */
 #define SD_OCR_S18R		(1 << 24)    /* 1.8V switching request */
 #define SD_ROCR_S18A		SD_OCR_S18R  /* 1.8V switching accepted by card */