From ca558d2b9a7de26dc546387479c3994699841e35 Mon Sep 17 00:00:00 2001 From: Michael Grzeschik Date: Mon, 14 Nov 2022 19:59:23 +0100 Subject: [PATCH] ARM: dts: at91: sam9g20ek: enable udc vbus gpio pinctrl [ Upstream commit 40a2226e8bfacb79dd154dea68febeead9d847e9 ] We set the PIOC to GPIO mode. This way the pin becomes an input signal will be usable by the controller. Without this change the udc on the 9g20ek does not work. Cc: nicolas.ferre@microchip.com Cc: ludovic.desroches@microchip.com Cc: alexandre.belloni@bootlin.com Cc: linux-arm-kernel@lists.infradead.org Cc: kernel@pengutronix.de Fixes: 5cb4e73575e3 ("ARM: at91: add at91sam9g20ek boards dt support") Signed-off-by: Michael Grzeschik Signed-off-by: Claudiu Beznea Link: https://lore.kernel.org/r/20221114185923.1023249-3-m.grzeschik@pengutronix.de Signed-off-by: Sasha Levin --- arch/arm/boot/dts/at91sam9g20ek_common.dtsi | 9 +++++++++ 1 file changed, 9 insertions(+) diff --git a/arch/arm/boot/dts/at91sam9g20ek_common.dtsi b/arch/arm/boot/dts/at91sam9g20ek_common.dtsi index 27847a47c108..1b326a0a2c92 100644 --- a/arch/arm/boot/dts/at91sam9g20ek_common.dtsi +++ b/arch/arm/boot/dts/at91sam9g20ek_common.dtsi @@ -39,6 +39,13 @@ }; + usb1 { + pinctrl_usb1_vbus_gpio: usb1_vbus_gpio { + atmel,pins = + ; /* PC5 GPIO */ + }; + }; + mmc0_slot1 { pinctrl_board_mmc0_slot1: mmc0_slot1-board { atmel,pins = @@ -72,6 +79,8 @@ }; usb1: gadget@fffa4000 { + pinctrl-0 = <&pinctrl_usb1_vbus_gpio>; + pinctrl-names = "default"; atmel,vbus-gpio = <&pioC 5 GPIO_ACTIVE_HIGH>; status = "okay"; };