Merge remote-tracking branch 'kumar/next' into next
This commit is contained in:
Benjamin Herrenschmidt
commit
caa1d631fc
@ -12,9 +12,12 @@ Properties:
|
||||
- #size-cells : Either one or two, depending on how large each chipselect
|
||||
can be.
|
||||
- reg : Offset and length of the register set for the device
|
||||
- interrupts : IFC has two interrupts. The first one is the "common"
|
||||
interrupt(CM_EVTER_STAT), and second is the NAND interrupt
|
||||
(NAND_EVTER_STAT).
|
||||
- interrupts: IFC may have one or two interrupts. If two interrupt
|
||||
specifiers are present, the first is the "common"
|
||||
interrupt (CM_EVTER_STAT), and the second is the NAND
|
||||
interrupt (NAND_EVTER_STAT). If there is only one,
|
||||
that interrupt reports both types of event.
|
||||
|
||||
|
||||
- ranges : Each range corresponds to a single chipselect, and covers
|
||||
the entire access window as configured.
|
||||
|
||||
@ -215,7 +215,8 @@ config ARCH_HIBERNATION_POSSIBLE
|
||||
config ARCH_SUSPEND_POSSIBLE
|
||||
def_bool y
|
||||
depends on ADB_PMU || PPC_EFIKA || PPC_LITE5200 || PPC_83xx || \
|
||||
(PPC_85xx && !SMP) || PPC_86xx || PPC_PSERIES || 44x || 40x
|
||||
(PPC_85xx && !PPC_E500MC) || PPC_86xx || PPC_PSERIES \
|
||||
|| 44x || 40x
|
||||
|
||||
config PPC_DCR_NATIVE
|
||||
bool
|
||||
@ -328,7 +329,8 @@ config SWIOTLB
|
||||
|
||||
config HOTPLUG_CPU
|
||||
bool "Support for enabling/disabling CPUs"
|
||||
depends on SMP && HOTPLUG && EXPERIMENTAL && (PPC_PSERIES || PPC_PMAC || PPC_POWERNV)
|
||||
depends on SMP && HOTPLUG && EXPERIMENTAL && (PPC_PSERIES || \
|
||||
PPC_PMAC || PPC_POWERNV || (PPC_85xx && !PPC_E500MC))
|
||||
---help---
|
||||
Say Y here to be able to disable and re-enable individual
|
||||
CPUs at runtime on SMP machines.
|
||||
|
||||
58
arch/powerpc/boot/dts/fsl/e500mc_power_isa.dtsi
Normal file
58
arch/powerpc/boot/dts/fsl/e500mc_power_isa.dtsi
Normal file
@ -0,0 +1,58 @@
|
||||
/*
|
||||
* e500mc Power ISA Device Tree Source (include)
|
||||
*
|
||||
* Copyright 2012 Freescale Semiconductor Inc.
|
||||
*
|
||||
* Redistribution and use in source and binary forms, with or without
|
||||
* modification, are permitted provided that the following conditions are met:
|
||||
* * Redistributions of source code must retain the above copyright
|
||||
* notice, this list of conditions and the following disclaimer.
|
||||
* * Redistributions in binary form must reproduce the above copyright
|
||||
* notice, this list of conditions and the following disclaimer in the
|
||||
* documentation and/or other materials provided with the distribution.
|
||||
* * Neither the name of Freescale Semiconductor nor the
|
||||
* names of its contributors may be used to endorse or promote products
|
||||
* derived from this software without specific prior written permission.
|
||||
*
|
||||
*
|
||||
* ALTERNATIVELY, this software may be distributed under the terms of the
|
||||
* GNU General Public License ("GPL") as published by the Free Software
|
||||
* Foundation, either version 2 of that License or (at your option) any
|
||||
* later version.
|
||||
*
|
||||
* THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor "AS IS" AND ANY
|
||||
* EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
|
||||
* WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
|
||||
* DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY
|
||||
* DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
|
||||
* (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
|
||||
* LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
|
||||
* ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
|
||||
* (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
|
||||
* SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
|
||||
*/
|
||||
|
||||
/ {
|
||||
cpus {
|
||||
power-isa-version = "2.06";
|
||||
power-isa-b; // Base
|
||||
power-isa-e; // Embedded
|
||||
power-isa-atb; // Alternate Time Base
|
||||
power-isa-cs; // Cache Specification
|
||||
power-isa-ds; // Decorated Storage
|
||||
power-isa-e.ed; // Embedded.Enhanced Debug
|
||||
power-isa-e.pd; // Embedded.External PID
|
||||
power-isa-e.hv; // Embedded.Hypervisor
|
||||
power-isa-e.le; // Embedded.Little-Endian
|
||||
power-isa-e.pm; // Embedded.Performance Monitor
|
||||
power-isa-e.pc; // Embedded.Processor Control
|
||||
power-isa-ecl; // Embedded Cache Locking
|
||||
power-isa-exp; // External Proxy
|
||||
power-isa-fp; // Floating Point
|
||||
power-isa-fp.r; // Floating Point.Record
|
||||
power-isa-mmc; // Memory Coherence
|
||||
power-isa-scpm; // Store Conditional Page Mobility
|
||||
power-isa-wt; // Wait
|
||||
mmu-type = "power-embedded";
|
||||
};
|
||||
};
|
||||
52
arch/powerpc/boot/dts/fsl/e500v2_power_isa.dtsi
Normal file
52
arch/powerpc/boot/dts/fsl/e500v2_power_isa.dtsi
Normal file
@ -0,0 +1,52 @@
|
||||
/*
|
||||
* e500v2 Power ISA Device Tree Source (include)
|
||||
*
|
||||
* Copyright 2012 Freescale Semiconductor Inc.
|
||||
*
|
||||
* Redistribution and use in source and binary forms, with or without
|
||||
* modification, are permitted provided that the following conditions are met:
|
||||
* * Redistributions of source code must retain the above copyright
|
||||
* notice, this list of conditions and the following disclaimer.
|
||||
* * Redistributions in binary form must reproduce the above copyright
|
||||
* notice, this list of conditions and the following disclaimer in the
|
||||
* documentation and/or other materials provided with the distribution.
|
||||
* * Neither the name of Freescale Semiconductor nor the
|
||||
* names of its contributors may be used to endorse or promote products
|
||||
* derived from this software without specific prior written permission.
|
||||
*
|
||||
*
|
||||
* ALTERNATIVELY, this software may be distributed under the terms of the
|
||||
* GNU General Public License ("GPL") as published by the Free Software
|
||||
* Foundation, either version 2 of that License or (at your option) any
|
||||
* later version.
|
||||
*
|
||||
* THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor "AS IS" AND ANY
|
||||
* EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
|
||||
* WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
|
||||
* DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY
|
||||
* DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
|
||||
* (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
|
||||
* LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
|
||||
* ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
|
||||
* (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
|
||||
* SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
|
||||
*/
|
||||
|
||||
/ {
|
||||
cpus {
|
||||
power-isa-version = "2.03";
|
||||
power-isa-b; // Base
|
||||
power-isa-e; // Embedded
|
||||
power-isa-atb; // Alternate Time Base
|
||||
power-isa-cs; // Cache Specification
|
||||
power-isa-e.le; // Embedded.Little-Endian
|
||||
power-isa-e.pm; // Embedded.Performance Monitor
|
||||
power-isa-ecl; // Embedded Cache Locking
|
||||
power-isa-mmc; // Memory Coherence
|
||||
power-isa-sp; // Signal Processing Engine
|
||||
power-isa-sp.fd; // SPE.Embedded Float Scalar Double
|
||||
power-isa-sp.fs; // SPE.Embedded Float Scalar Single
|
||||
power-isa-sp.fv; // SPE.Embedded Float Vector
|
||||
mmu-type = "power-embedded";
|
||||
};
|
||||
};
|
||||
59
arch/powerpc/boot/dts/fsl/e5500_power_isa.dtsi
Normal file
59
arch/powerpc/boot/dts/fsl/e5500_power_isa.dtsi
Normal file
@ -0,0 +1,59 @@
|
||||
/*
|
||||
* e5500 Power ISA Device Tree Source (include)
|
||||
*
|
||||
* Copyright 2012 Freescale Semiconductor Inc.
|
||||
*
|
||||
* Redistribution and use in source and binary forms, with or without
|
||||
* modification, are permitted provided that the following conditions are met:
|
||||
* * Redistributions of source code must retain the above copyright
|
||||
* notice, this list of conditions and the following disclaimer.
|
||||
* * Redistributions in binary form must reproduce the above copyright
|
||||
* notice, this list of conditions and the following disclaimer in the
|
||||
* documentation and/or other materials provided with the distribution.
|
||||
* * Neither the name of Freescale Semiconductor nor the
|
||||
* names of its contributors may be used to endorse or promote products
|
||||
* derived from this software without specific prior written permission.
|
||||
*
|
||||
*
|
||||
* ALTERNATIVELY, this software may be distributed under the terms of the
|
||||
* GNU General Public License ("GPL") as published by the Free Software
|
||||
* Foundation, either version 2 of that License or (at your option) any
|
||||
* later version.
|
||||
*
|
||||
* THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor "AS IS" AND ANY
|
||||
* EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
|
||||
* WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
|
||||
* DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY
|
||||
* DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
|
||||
* (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
|
||||
* LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
|
||||
* ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
|
||||
* (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
|
||||
* SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
|
||||
*/
|
||||
|
||||
/ {
|
||||
cpus {
|
||||
power-isa-version = "2.06";
|
||||
power-isa-b; // Base
|
||||
power-isa-e; // Embedded
|
||||
power-isa-atb; // Alternate Time Base
|
||||
power-isa-cs; // Cache Specification
|
||||
power-isa-ds; // Decorated Storage
|
||||
power-isa-e.ed; // Embedded.Enhanced Debug
|
||||
power-isa-e.pd; // Embedded.External PID
|
||||
power-isa-e.hv; // Embedded.Hypervisor
|
||||
power-isa-e.le; // Embedded.Little-Endian
|
||||
power-isa-e.pm; // Embedded.Performance Monitor
|
||||
power-isa-e.pc; // Embedded.Processor Control
|
||||
power-isa-ecl; // Embedded Cache Locking
|
||||
power-isa-exp; // External Proxy
|
||||
power-isa-fp; // Floating Point
|
||||
power-isa-fp.r; // Floating Point.Record
|
||||
power-isa-mmc; // Memory Coherence
|
||||
power-isa-scpm; // Store Conditional Page Mobility
|
||||
power-isa-wt; // Wait
|
||||
power-isa-64; // 64-bit
|
||||
mmu-type = "power-embedded";
|
||||
};
|
||||
};
|
||||
@ -33,6 +33,9 @@
|
||||
*/
|
||||
|
||||
/dts-v1/;
|
||||
|
||||
/include/ "e500v2_power_isa.dtsi"
|
||||
|
||||
/ {
|
||||
compatible = "fsl,MPC8536";
|
||||
#address-cells = <2>;
|
||||
|
||||
@ -33,6 +33,9 @@
|
||||
*/
|
||||
|
||||
/dts-v1/;
|
||||
|
||||
/include/ "e500v2_power_isa.dtsi"
|
||||
|
||||
/ {
|
||||
compatible = "fsl,MPC8544";
|
||||
#address-cells = <2>;
|
||||
|
||||
@ -33,6 +33,9 @@
|
||||
*/
|
||||
|
||||
/dts-v1/;
|
||||
|
||||
/include/ "e500v2_power_isa.dtsi"
|
||||
|
||||
/ {
|
||||
compatible = "fsl,MPC8548";
|
||||
#address-cells = <2>;
|
||||
|
||||
@ -33,6 +33,9 @@
|
||||
*/
|
||||
|
||||
/dts-v1/;
|
||||
|
||||
/include/ "e500v2_power_isa.dtsi"
|
||||
|
||||
/ {
|
||||
compatible = "fsl,MPC8568";
|
||||
#address-cells = <2>;
|
||||
|
||||
@ -33,6 +33,9 @@
|
||||
*/
|
||||
|
||||
/dts-v1/;
|
||||
|
||||
/include/ "e500v2_power_isa.dtsi"
|
||||
|
||||
/ {
|
||||
compatible = "fsl,MPC8569";
|
||||
#address-cells = <2>;
|
||||
|
||||
@ -33,6 +33,9 @@
|
||||
*/
|
||||
|
||||
/dts-v1/;
|
||||
|
||||
/include/ "e500v2_power_isa.dtsi"
|
||||
|
||||
/ {
|
||||
compatible = "fsl,MPC8572";
|
||||
#address-cells = <2>;
|
||||
|
||||
@ -33,6 +33,9 @@
|
||||
*/
|
||||
|
||||
/dts-v1/;
|
||||
|
||||
/include/ "e500v2_power_isa.dtsi"
|
||||
|
||||
/ {
|
||||
compatible = "fsl,P1010";
|
||||
#address-cells = <2>;
|
||||
|
||||
@ -33,6 +33,9 @@
|
||||
*/
|
||||
|
||||
/dts-v1/;
|
||||
|
||||
/include/ "e500v2_power_isa.dtsi"
|
||||
|
||||
/ {
|
||||
compatible = "fsl,P1020";
|
||||
#address-cells = <2>;
|
||||
|
||||
@ -33,6 +33,9 @@
|
||||
*/
|
||||
|
||||
/dts-v1/;
|
||||
|
||||
/include/ "e500v2_power_isa.dtsi"
|
||||
|
||||
/ {
|
||||
compatible = "fsl,P1021";
|
||||
#address-cells = <2>;
|
||||
|
||||
@ -33,6 +33,9 @@
|
||||
*/
|
||||
|
||||
/dts-v1/;
|
||||
|
||||
/include/ "e500v2_power_isa.dtsi"
|
||||
|
||||
/ {
|
||||
compatible = "fsl,P1022";
|
||||
#address-cells = <2>;
|
||||
|
||||
@ -33,6 +33,9 @@
|
||||
*/
|
||||
|
||||
/dts-v1/;
|
||||
|
||||
/include/ "e500v2_power_isa.dtsi"
|
||||
|
||||
/ {
|
||||
compatible = "fsl,P1023";
|
||||
#address-cells = <2>;
|
||||
|
||||
@ -33,6 +33,9 @@
|
||||
*/
|
||||
|
||||
/dts-v1/;
|
||||
|
||||
/include/ "e500v2_power_isa.dtsi"
|
||||
|
||||
/ {
|
||||
compatible = "fsl,P2020";
|
||||
#address-cells = <2>;
|
||||
|
||||
@ -33,6 +33,9 @@
|
||||
*/
|
||||
|
||||
/dts-v1/;
|
||||
|
||||
/include/ "e500mc_power_isa.dtsi"
|
||||
|
||||
/ {
|
||||
compatible = "fsl,P2041";
|
||||
#address-cells = <2>;
|
||||
|
||||
@ -33,6 +33,9 @@
|
||||
*/
|
||||
|
||||
/dts-v1/;
|
||||
|
||||
/include/ "e500mc_power_isa.dtsi"
|
||||
|
||||
/ {
|
||||
compatible = "fsl,P3041";
|
||||
#address-cells = <2>;
|
||||
|
||||
@ -33,6 +33,9 @@
|
||||
*/
|
||||
|
||||
/dts-v1/;
|
||||
|
||||
/include/ "e500mc_power_isa.dtsi"
|
||||
|
||||
/ {
|
||||
compatible = "fsl,P4080";
|
||||
#address-cells = <2>;
|
||||
|
||||
@ -33,6 +33,9 @@
|
||||
*/
|
||||
|
||||
/dts-v1/;
|
||||
|
||||
/include/ "e5500_power_isa.dtsi"
|
||||
|
||||
/ {
|
||||
compatible = "fsl,P5020";
|
||||
#address-cells = <2>;
|
||||
|
||||
320
arch/powerpc/boot/dts/fsl/p5040si-post.dtsi
Normal file
320
arch/powerpc/boot/dts/fsl/p5040si-post.dtsi
Normal file
@ -0,0 +1,320 @@
|
||||
/*
|
||||
* P5040 Silicon/SoC Device Tree Source (post include)
|
||||
*
|
||||
* Copyright 2012 Freescale Semiconductor Inc.
|
||||
*
|
||||
* Redistribution and use in source and binary forms, with or without
|
||||
* modification, are permitted provided that the following conditions are met:
|
||||
* * Redistributions of source code must retain the above copyright
|
||||
* notice, this list of conditions and the following disclaimer.
|
||||
* * Redistributions in binary form must reproduce the above copyright
|
||||
* notice, this list of conditions and the following disclaimer in the
|
||||
* documentation and/or other materials provided with the distribution.
|
||||
* * Neither the name of Freescale Semiconductor nor the
|
||||
* names of its contributors may be used to endorse or promote products
|
||||
* derived from this software without specific prior written permission.
|
||||
*
|
||||
*
|
||||
* ALTERNATIVELY, this software may be distributed under the terms of the
|
||||
* GNU General Public License ("GPL") as published by the Free Software
|
||||
* Foundation, either version 2 of that License or (at your option) any
|
||||
* later version.
|
||||
*
|
||||
* This software is provided by Freescale Semiconductor "as is" and any
|
||||
* express or implied warranties, including, but not limited to, the implied
|
||||
* warranties of merchantability and fitness for a particular purpose are
|
||||
* disclaimed. In no event shall Freescale Semiconductor be liable for any
|
||||
* direct, indirect, incidental, special, exemplary, or consequential damages
|
||||
* (including, but not limited to, procurement of substitute goods or services;
|
||||
* loss of use, data, or profits; or business interruption) however caused and
|
||||
* on any theory of liability, whether in contract, strict liability, or tort
|
||||
* (including negligence or otherwise) arising in any way out of the use of this
|
||||
* software, even if advised of the possibility of such damage.
|
||||
*/
|
||||
|
||||
&lbc {
|
||||
compatible = "fsl,p5040-elbc", "fsl,elbc", "simple-bus";
|
||||
interrupts = <25 2 0 0>;
|
||||
#address-cells = <2>;
|
||||
#size-cells = <1>;
|
||||
};
|
||||
|
||||
/* controller at 0x200000 */
|
||||
&pci0 {
|
||||
compatible = "fsl,p5040-pcie", "fsl,qoriq-pcie-v2.4";
|
||||
device_type = "pci";
|
||||
#size-cells = <2>;
|
||||
#address-cells = <3>;
|
||||
bus-range = <0x0 0xff>;
|
||||
clock-frequency = <33333333>;
|
||||
interrupts = <16 2 1 15>;
|
||||
pcie@0 {
|
||||
reg = <0 0 0 0 0>;
|
||||
#interrupt-cells = <1>;
|
||||
#size-cells = <2>;
|
||||
#address-cells = <3>;
|
||||
device_type = "pci";
|
||||
interrupts = <16 2 1 15>;
|
||||
interrupt-map-mask = <0xf800 0 0 7>;
|
||||
interrupt-map = <
|
||||
/* IDSEL 0x0 */
|
||||
0000 0 0 1 &mpic 40 1 0 0
|
||||
0000 0 0 2 &mpic 1 1 0 0
|
||||
0000 0 0 3 &mpic 2 1 0 0
|
||||
0000 0 0 4 &mpic 3 1 0 0
|
||||
>;
|
||||
};
|
||||
};
|
||||
|
||||
/* controller at 0x201000 */
|
||||
&pci1 {
|
||||
compatible = "fsl,p5040-pcie", "fsl,qoriq-pcie-v2.4";
|
||||
device_type = "pci";
|
||||
#size-cells = <2>;
|
||||
#address-cells = <3>;
|
||||
bus-range = <0 0xff>;
|
||||
clock-frequency = <33333333>;
|
||||
interrupts = <16 2 1 14>;
|
||||
pcie@0 {
|
||||
reg = <0 0 0 0 0>;
|
||||
#interrupt-cells = <1>;
|
||||
#size-cells = <2>;
|
||||
#address-cells = <3>;
|
||||
device_type = "pci";
|
||||
interrupts = <16 2 1 14>;
|
||||
interrupt-map-mask = <0xf800 0 0 7>;
|
||||
interrupt-map = <
|
||||
/* IDSEL 0x0 */
|
||||
0000 0 0 1 &mpic 41 1 0 0
|
||||
0000 0 0 2 &mpic 5 1 0 0
|
||||
0000 0 0 3 &mpic 6 1 0 0
|
||||
0000 0 0 4 &mpic 7 1 0 0
|
||||
>;
|
||||
};
|
||||
};
|
||||
|
||||
/* controller at 0x202000 */
|
||||
&pci2 {
|
||||
compatible = "fsl,p5040-pcie", "fsl,qoriq-pcie-v2.4";
|
||||
device_type = "pci";
|
||||
#size-cells = <2>;
|
||||
#address-cells = <3>;
|
||||
bus-range = <0x0 0xff>;
|
||||
clock-frequency = <33333333>;
|
||||
interrupts = <16 2 1 13>;
|
||||
pcie@0 {
|
||||
reg = <0 0 0 0 0>;
|
||||
#interrupt-cells = <1>;
|
||||
#size-cells = <2>;
|
||||
#address-cells = <3>;
|
||||
device_type = "pci";
|
||||
interrupts = <16 2 1 13>;
|
||||
interrupt-map-mask = <0xf800 0 0 7>;
|
||||
interrupt-map = <
|
||||
/* IDSEL 0x0 */
|
||||
0000 0 0 1 &mpic 42 1 0 0
|
||||
0000 0 0 2 &mpic 9 1 0 0
|
||||
0000 0 0 3 &mpic 10 1 0 0
|
||||
0000 0 0 4 &mpic 11 1 0 0
|
||||
>;
|
||||
};
|
||||
};
|
||||
|
||||
&dcsr {
|
||||
#address-cells = <1>;
|
||||
#size-cells = <1>;
|
||||
compatible = "fsl,dcsr", "simple-bus";
|
||||
|
||||
dcsr-epu@0 {
|
||||
compatible = "fsl,dcsr-epu";
|
||||
interrupts = <52 2 0 0
|
||||
84 2 0 0
|
||||
85 2 0 0>;
|
||||
reg = <0x0 0x1000>;
|
||||
};
|
||||
dcsr-npc {
|
||||
compatible = "fsl,dcsr-npc";
|
||||
reg = <0x1000 0x1000 0x1000000 0x8000>;
|
||||
};
|
||||
dcsr-nxc@2000 {
|
||||
compatible = "fsl,dcsr-nxc";
|
||||
reg = <0x2000 0x1000>;
|
||||
};
|
||||
dcsr-corenet {
|
||||
compatible = "fsl,dcsr-corenet";
|
||||
reg = <0x8000 0x1000 0xB0000 0x1000>;
|
||||
};
|
||||
dcsr-dpaa@9000 {
|
||||
compatible = "fsl,p5040-dcsr-dpaa", "fsl,dcsr-dpaa";
|
||||
reg = <0x9000 0x1000>;
|
||||
};
|
||||
dcsr-ocn@11000 {
|
||||
compatible = "fsl,p5040-dcsr-ocn", "fsl,dcsr-ocn";
|
||||
reg = <0x11000 0x1000>;
|
||||
};
|
||||
dcsr-ddr@12000 {
|
||||
compatible = "fsl,dcsr-ddr";
|
||||
dev-handle = <&ddr1>;
|
||||
reg = <0x12000 0x1000>;
|
||||
};
|
||||
dcsr-ddr@13000 {
|
||||
compatible = "fsl,dcsr-ddr";
|
||||
dev-handle = <&ddr2>;
|
||||
reg = <0x13000 0x1000>;
|
||||
};
|
||||
dcsr-nal@18000 {
|
||||
compatible = "fsl,p5040-dcsr-nal", "fsl,dcsr-nal";
|
||||
reg = <0x18000 0x1000>;
|
||||
};
|
||||
dcsr-rcpm@22000 {
|
||||
compatible = "fsl,p5040-dcsr-rcpm", "fsl,dcsr-rcpm";
|
||||
reg = <0x22000 0x1000>;
|
||||
};
|
||||
dcsr-cpu-sb-proxy@40000 {
|
||||
compatible = "fsl,dcsr-e5500-sb-proxy", "fsl,dcsr-cpu-sb-proxy";
|
||||
cpu-handle = <&cpu0>;
|
||||
reg = <0x40000 0x1000>;
|
||||
};
|
||||
dcsr-cpu-sb-proxy@41000 {
|
||||
compatible = "fsl,dcsr-e5500-sb-proxy", "fsl,dcsr-cpu-sb-proxy";
|
||||
cpu-handle = <&cpu1>;
|
||||
reg = <0x41000 0x1000>;
|
||||
};
|
||||
dcsr-cpu-sb-proxy@42000 {
|
||||
compatible = "fsl,dcsr-e5500-sb-proxy", "fsl,dcsr-cpu-sb-proxy";
|
||||
cpu-handle = <&cpu2>;
|
||||
reg = <0x42000 0x1000>;
|
||||
};
|
||||
dcsr-cpu-sb-proxy@43000 {
|
||||
compatible = "fsl,dcsr-e5500-sb-proxy", "fsl,dcsr-cpu-sb-proxy";
|
||||
cpu-handle = <&cpu3>;
|
||||
reg = <0x43000 0x1000>;
|
||||
};
|
||||
};
|
||||
|
||||
&soc {
|
||||
#address-cells = <1>;
|
||||
#size-cells = <1>;
|
||||
device_type = "soc";
|
||||
compatible = "simple-bus";
|
||||
|
||||
soc-sram-error {
|
||||
compatible = "fsl,soc-sram-error";
|
||||
interrupts = <16 2 1 29>;
|
||||
};
|
||||
|
||||
corenet-law@0 {
|
||||
compatible = "fsl,corenet-law";
|
||||
reg = <0x0 0x1000>;
|
||||
fsl,num-laws = <32>;
|
||||
};
|
||||
|
||||
ddr1: memory-controller@8000 {
|
||||
compatible = "fsl,qoriq-memory-controller-v4.5", "fsl,qoriq-memory-controller";
|
||||
reg = <0x8000 0x1000>;
|
||||
interrupts = <16 2 1 23>;
|
||||
};
|
||||
|
||||
ddr2: memory-controller@9000 {
|
||||
compatible = "fsl,qoriq-memory-controller-v4.5","fsl,qoriq-memory-controller";
|
||||
reg = <0x9000 0x1000>;
|
||||
interrupts = <16 2 1 22>;
|
||||
};
|
||||
|
||||
cpc: l3-cache-controller@10000 {
|
||||
compatible = "fsl,p5040-l3-cache-controller", "fsl,p4080-l3-cache-controller", "cache";
|
||||
reg = <0x10000 0x1000
|
||||
0x11000 0x1000>;
|
||||
interrupts = <16 2 1 27
|
||||
16 2 1 26>;
|
||||
};
|
||||
|
||||
corenet-cf@18000 {
|
||||
compatible = "fsl,corenet-cf";
|
||||
reg = <0x18000 0x1000>;
|
||||
interrupts = <16 2 1 31>;
|
||||
fsl,ccf-num-csdids = <32>;
|
||||
fsl,ccf-num-snoopids = <32>;
|
||||
};
|
||||
|
||||
iommu@20000 {
|
||||
compatible = "fsl,pamu-v1.0", "fsl,pamu";
|
||||
reg = <0x20000 0x5000>;
|
||||
interrupts = <
|
||||
24 2 0 0
|
||||
16 2 1 30>;
|
||||
};
|
||||
|
||||
/include/ "qoriq-mpic.dtsi"
|
||||
|
||||
guts: global-utilities@e0000 {
|
||||
compatible = "fsl,p5040-device-config", "fsl,qoriq-device-config-1.0";
|
||||
reg = <0xe0000 0xe00>;
|
||||
fsl,has-rstcr;
|
||||
#sleep-cells = <1>;
|
||||
fsl,liodn-bits = <12>;
|
||||
};
|
||||
|
||||
pins: global-utilities@e0e00 {
|
||||
compatible = "fsl,p5040-pin-control", "fsl,qoriq-pin-control-1.0";
|
||||
reg = <0xe0e00 0x200>;
|
||||
#sleep-cells = <2>;
|
||||
};
|
||||
|
||||
clockgen: global-utilities@e1000 {
|
||||
compatible = "fsl,p5040-clockgen", "fsl,qoriq-clockgen-1.0";
|
||||
reg = <0xe1000 0x1000>;
|
||||
clock-frequency = <0>;
|
||||
};
|
||||
|
||||
rcpm: global-utilities@e2000 {
|
||||
compatible = "fsl,p5040-rcpm", "fsl,qoriq-rcpm-1.0";
|
||||
reg = <0xe2000 0x1000>;
|
||||
#sleep-cells = <1>;
|
||||
};
|
||||
|
||||
sfp: sfp@e8000 {
|
||||
compatible = "fsl,p5040-sfp", "fsl,qoriq-sfp-1.0";
|
||||
reg = <0xe8000 0x1000>;
|
||||
};
|
||||
|
||||
serdes: serdes@ea000 {
|
||||
compatible = "fsl,p5040-serdes";
|
||||
reg = <0xea000 0x1000>;
|
||||
};
|
||||
|
||||
/include/ "qoriq-dma-0.dtsi"
|
||||
/include/ "qoriq-dma-1.dtsi"
|
||||
/include/ "qoriq-espi-0.dtsi"
|
||||
spi@110000 {
|
||||
fsl,espi-num-chipselects = <4>;
|
||||
};
|
||||
|
||||
/include/ "qoriq-esdhc-0.dtsi"
|
||||
sdhc@114000 {
|
||||
sdhci,auto-cmd12;
|
||||
};
|
||||
|
||||
/include/ "qoriq-i2c-0.dtsi"
|
||||
/include/ "qoriq-i2c-1.dtsi"
|
||||
/include/ "qoriq-duart-0.dtsi"
|
||||
/include/ "qoriq-duart-1.dtsi"
|
||||
/include/ "qoriq-gpio-0.dtsi"
|
||||
/include/ "qoriq-usb2-mph-0.dtsi"
|
||||
usb0: usb@210000 {
|
||||
compatible = "fsl-usb2-mph-v1.6", "fsl,mpc85xx-usb2-mph", "fsl-usb2-mph";
|
||||
phy_type = "utmi";
|
||||
port0;
|
||||
};
|
||||
|
||||
/include/ "qoriq-usb2-dr-0.dtsi"
|
||||
usb1: usb@211000 {
|
||||
compatible = "fsl-usb2-dr-v1.6", "fsl,mpc85xx-usb2-dr", "fsl-usb2-dr";
|
||||
dr_mode = "host";
|
||||
phy_type = "utmi";
|
||||
};
|
||||
|
||||
/include/ "qoriq-sata2-0.dtsi"
|
||||
/include/ "qoriq-sata2-1.dtsi"
|
||||
/include/ "qoriq-sec5.2-0.dtsi"
|
||||
};
|
||||
114
arch/powerpc/boot/dts/fsl/p5040si-pre.dtsi
Normal file
114
arch/powerpc/boot/dts/fsl/p5040si-pre.dtsi
Normal file
@ -0,0 +1,114 @@
|
||||
/*
|
||||
* P5040 Silicon/SoC Device Tree Source (pre include)
|
||||
*
|
||||
* Copyright 2012 Freescale Semiconductor Inc.
|
||||
*
|
||||
* Redistribution and use in source and binary forms, with or without
|
||||
* modification, are permitted provided that the following conditions are met:
|
||||
* * Redistributions of source code must retain the above copyright
|
||||
* notice, this list of conditions and the following disclaimer.
|
||||
* * Redistributions in binary form must reproduce the above copyright
|
||||
* notice, this list of conditions and the following disclaimer in the
|
||||
* documentation and/or other materials provided with the distribution.
|
||||
* * Neither the name of Freescale Semiconductor nor the
|
||||
* names of its contributors may be used to endorse or promote products
|
||||
* derived from this software without specific prior written permission.
|
||||
*
|
||||
*
|
||||
* ALTERNATIVELY, this software may be distributed under the terms of the
|
||||
* GNU General Public License ("GPL") as published by the Free Software
|
||||
* Foundation, either version 2 of that License or (at your option) any
|
||||
* later version.
|
||||
*
|
||||
* This software is provided by Freescale Semiconductor "as is" and any
|
||||
* express or implied warranties, including, but not limited to, the implied
|
||||
* warranties of merchantability and fitness for a particular purpose are
|
||||
* disclaimed. In no event shall Freescale Semiconductor be liable for any
|
||||
* direct, indirect, incidental, special, exemplary, or consequential damages
|
||||
* (including, but not limited to, procurement of substitute goods or services;
|
||||
* loss of use, data, or profits; or business interruption) however caused and
|
||||
* on any theory of liability, whether in contract, strict liability, or tort
|
||||
* (including negligence or otherwise) arising in any way out of the use of this
|
||||
* software, even if advised of the possibility of such damage.
|
||||
*/
|
||||
|
||||
/dts-v1/;
|
||||
|
||||
/include/ "e5500_power_isa.dtsi"
|
||||
|
||||
/ {
|
||||
compatible = "fsl,P5040";
|
||||
#address-cells = <2>;
|
||||
#size-cells = <2>;
|
||||
interrupt-parent = <&mpic>;
|
||||
|
||||
aliases {
|
||||
ccsr = &soc;
|
||||
dcsr = &dcsr;
|
||||
|
||||
serial0 = &serial0;
|
||||
serial1 = &serial1;
|
||||
serial2 = &serial2;
|
||||
serial3 = &serial3;
|
||||
pci0 = &pci0;
|
||||
pci1 = &pci1;
|
||||
pci2 = &pci2;
|
||||
usb0 = &usb0;
|
||||
usb1 = &usb1;
|
||||
dma0 = &dma0;
|
||||
dma1 = &dma1;
|
||||
sdhc = &sdhc;
|
||||
msi0 = &msi0;
|
||||
msi1 = &msi1;
|
||||
msi2 = &msi2;
|
||||
|
||||
crypto = &crypto;
|
||||
sec_jr0 = &sec_jr0;
|
||||
sec_jr1 = &sec_jr1;
|
||||
sec_jr2 = &sec_jr2;
|
||||
sec_jr3 = &sec_jr3;
|
||||
rtic_a = &rtic_a;
|
||||
rtic_b = &rtic_b;
|
||||
rtic_c = &rtic_c;
|
||||
rtic_d = &rtic_d;
|
||||
sec_mon = &sec_mon;
|
||||
};
|
||||
|
||||
cpus {
|
||||
#address-cells = <1>;
|
||||
#size-cells = <0>;
|
||||
|
||||
cpu0: PowerPC,e5500@0 {
|
||||
device_type = "cpu";
|
||||
reg = <0>;
|
||||
next-level-cache = <&L2_0>;
|
||||
L2_0: l2-cache {
|
||||
next-level-cache = <&cpc>;
|
||||
};
|
||||
};
|
||||
cpu1: PowerPC,e5500@1 {
|
||||
device_type = "cpu";
|
||||
reg = <1>;
|
||||
next-level-cache = <&L2_1>;
|
||||
L2_1: l2-cache {
|
||||
next-level-cache = <&cpc>;
|
||||
};
|
||||
};
|
||||
cpu2: PowerPC,e5500@2 {
|
||||
device_type = "cpu";
|
||||
reg = <2>;
|
||||
next-level-cache = <&L2_2>;
|
||||
L2_2: l2-cache {
|
||||
next-level-cache = <&cpc>;
|
||||
};
|
||||
};
|
||||
cpu3: PowerPC,e5500@3 {
|
||||
device_type = "cpu";
|
||||
reg = <3>;
|
||||
next-level-cache = <&L2_3>;
|
||||
L2_3: l2-cache {
|
||||
next-level-cache = <&cpc>;
|
||||
};
|
||||
};
|
||||
};
|
||||
};
|
||||
118
arch/powerpc/boot/dts/fsl/qoriq-sec5.2-0.dtsi
Normal file
118
arch/powerpc/boot/dts/fsl/qoriq-sec5.2-0.dtsi
Normal file
@ -0,0 +1,118 @@
|
||||
/*
|
||||
* QorIQ Sec/Crypto 5.2 device tree stub [ controller @ offset 0x300000 ]
|
||||
*
|
||||
* Copyright 2011-2012 Freescale Semiconductor Inc.
|
||||
*
|
||||
* Redistribution and use in source and binary forms, with or without
|
||||
* modification, are permitted provided that the following conditions are met:
|
||||
* * Redistributions of source code must retain the above copyright
|
||||
* notice, this list of conditions and the following disclaimer.
|
||||
* * Redistributions in binary form must reproduce the above copyright
|
||||
* notice, this list of conditions and the following disclaimer in the
|
||||
* documentation and/or other materials provided with the distribution.
|
||||
* * Neither the name of Freescale Semiconductor nor the
|
||||
* names of its contributors may be used to endorse or promote products
|
||||
* derived from this software without specific prior written permission.
|
||||
*
|
||||
*
|
||||
* ALTERNATIVELY, this software may be distributed under the terms of the
|
||||
* GNU General Public License ("GPL") as published by the Free Software
|
||||
* Foundation, either version 2 of that License or (at your option) any
|
||||
* later version.
|
||||
*
|
||||
* THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY
|
||||
* EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
|
||||
* WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
|
||||
* DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY
|
||||
* DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
|
||||
* (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
|
||||
* LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
|
||||
* ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
|
||||
* (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
|
||||
* SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
|
||||
*/
|
||||
|
||||
crypto: crypto@300000 {
|
||||
compatible = "fsl,sec-v5.2", "fsl,sec-v5.0", "fsl,sec-v4.0";
|
||||
#address-cells = <1>;
|
||||
#size-cells = <1>;
|
||||
reg = <0x300000 0x10000>;
|
||||
ranges = <0 0x300000 0x10000>;
|
||||
interrupts = <92 2 0 0>;
|
||||
|
||||
sec_jr0: jr@1000 {
|
||||
compatible = "fsl,sec-v5.2-job-ring",
|
||||
"fsl,sec-v5.0-job-ring",
|
||||
"fsl,sec-v4.0-job-ring";
|
||||
reg = <0x1000 0x1000>;
|
||||
interrupts = <88 2 0 0>;
|
||||
};
|
||||
|
||||
sec_jr1: jr@2000 {
|
||||
compatible = "fsl,sec-v5.2-job-ring",
|
||||
"fsl,sec-v5.0-job-ring",
|
||||
"fsl,sec-v4.0-job-ring";
|
||||
reg = <0x2000 0x1000>;
|
||||
interrupts = <89 2 0 0>;
|
||||
};
|
||||
|
||||
sec_jr2: jr@3000 {
|
||||
compatible = "fsl,sec-v5.2-job-ring",
|
||||
"fsl,sec-v5.0-job-ring",
|
||||
"fsl,sec-v4.0-job-ring";
|
||||
reg = <0x3000 0x1000>;
|
||||
interrupts = <90 2 0 0>;
|
||||
};
|
||||
|
||||
sec_jr3: jr@4000 {
|
||||
compatible = "fsl,sec-v5.2-job-ring",
|
||||
"fsl,sec-v5.0-job-ring",
|
||||
"fsl,sec-v4.0-job-ring";
|
||||
reg = <0x4000 0x1000>;
|
||||
interrupts = <91 2 0 0>;
|
||||
};
|
||||
|
||||
rtic@6000 {
|
||||
compatible = "fsl,sec-v5.2-rtic",
|
||||
"fsl,sec-v5.0-rtic",
|
||||
"fsl,sec-v4.0-rtic";
|
||||
#address-cells = <1>;
|
||||
#size-cells = <1>;
|
||||
reg = <0x6000 0x100>;
|
||||
ranges = <0x0 0x6100 0xe00>;
|
||||
|
||||
rtic_a: rtic-a@0 {
|
||||
compatible = "fsl,sec-v5.2-rtic-memory",
|
||||
"fsl,sec-v5.0-rtic-memory",
|
||||
"fsl,sec-v4.0-rtic-memory";
|
||||
reg = <0x00 0x20 0x100 0x80>;
|
||||
};
|
||||
|
||||
rtic_b: rtic-b@20 {
|
||||
compatible = "fsl,sec-v5.2-rtic-memory",
|
||||
"fsl,sec-v5.0-rtic-memory",
|
||||
"fsl,sec-v4.0-rtic-memory";
|
||||
reg = <0x20 0x20 0x200 0x80>;
|
||||
};
|
||||
|
||||
rtic_c: rtic-c@40 {
|
||||
compatible = "fsl,sec-v5.2-rtic-memory",
|
||||
"fsl,sec-v5.0-rtic-memory",
|
||||
"fsl,sec-v4.0-rtic-memory";
|
||||
reg = <0x40 0x20 0x300 0x80>;
|
||||
};
|
||||
|
||||
rtic_d: rtic-d@60 {
|
||||
compatible = "fsl,sec-v5.2-rtic-memory",
|
||||
"fsl,sec-v5.0-rtic-memory",
|
||||
"fsl,sec-v4.0-rtic-memory";
|
||||
reg = <0x60 0x20 0x500 0x80>;
|
||||
};
|
||||
};
|
||||
};
|
||||
|
||||
sec_mon: sec_mon@314000 {
|
||||
compatible = "fsl,sec-v5.2-mon", "fsl,sec-v5.0-mon", "fsl,sec-v4.0-mon";
|
||||
reg = <0x314000 0x1000>;
|
||||
interrupts = <93 2 0 0>;
|
||||
};
|
||||
@ -132,6 +132,10 @@
|
||||
reg = <0x68>;
|
||||
interrupts = <0 0x1 0 0>;
|
||||
};
|
||||
adt7461@4c {
|
||||
compatible = "adi,adt7461";
|
||||
reg = <0x4c>;
|
||||
};
|
||||
};
|
||||
|
||||
spi@7000 {
|
||||
|
||||
@ -11,6 +11,8 @@
|
||||
|
||||
/dts-v1/;
|
||||
|
||||
/include/ "fsl/e500v2_power_isa.dtsi"
|
||||
|
||||
/ {
|
||||
model = "MPC8540ADS";
|
||||
compatible = "MPC8540ADS", "MPC85xxADS";
|
||||
|
||||
@ -11,6 +11,8 @@
|
||||
|
||||
/dts-v1/;
|
||||
|
||||
/include/ "fsl/e500v2_power_isa.dtsi"
|
||||
|
||||
/ {
|
||||
model = "MPC8541CDS";
|
||||
compatible = "MPC8541CDS", "MPC85xxCDS";
|
||||
|
||||
@ -20,8 +20,10 @@
|
||||
reg = <0 0 0 0>; // Filled by U-Boot
|
||||
};
|
||||
|
||||
lbc: localbus@e0005000 {
|
||||
board_lbc: lbc: localbus@e0005000 {
|
||||
reg = <0 0xe0005000 0 0x1000>;
|
||||
|
||||
ranges = <0x0 0x0 0x0 0xff800000 0x800000>;
|
||||
};
|
||||
|
||||
board_soc: soc: soc8544@e0000000 {
|
||||
|
||||
@ -32,6 +32,45 @@
|
||||
* SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
|
||||
*/
|
||||
|
||||
&board_lbc {
|
||||
nor@0,0 {
|
||||
#address-cells = <1>;
|
||||
#size-cells = <1>;
|
||||
compatible = "cfi-flash";
|
||||
reg = <0x0 0x0 0x800000>;
|
||||
bank-width = <2>;
|
||||
device-width = <1>;
|
||||
|
||||
partition@0 {
|
||||
reg = <0x0 0x10000>;
|
||||
label = "dtb-nor";
|
||||
};
|
||||
|
||||
partition@20000 {
|
||||
reg = <0x20000 0x30000>;
|
||||
label = "diagnostic-nor";
|
||||
read-only;
|
||||
};
|
||||
|
||||
partition@200000 {
|
||||
reg = <0x200000 0x200000>;
|
||||
label = "dink-nor";
|
||||
read-only;
|
||||
};
|
||||
|
||||
partition@400000 {
|
||||
reg = <0x400000 0x380000>;
|
||||
label = "kernel-nor";
|
||||
};
|
||||
|
||||
partition@780000 {
|
||||
reg = <0x780000 0x80000>;
|
||||
label = "u-boot-nor";
|
||||
read-only;
|
||||
};
|
||||
};
|
||||
};
|
||||
|
||||
&board_soc {
|
||||
enet0: ethernet@24000 {
|
||||
phy-handle = <&phy0>;
|
||||
|
||||
@ -11,6 +11,8 @@
|
||||
|
||||
/dts-v1/;
|
||||
|
||||
/include/ "fsl/e500v2_power_isa.dtsi"
|
||||
|
||||
/ {
|
||||
model = "MPC8555CDS";
|
||||
compatible = "MPC8555CDS", "MPC85xxCDS";
|
||||
|
||||
@ -11,6 +11,8 @@
|
||||
|
||||
/dts-v1/;
|
||||
|
||||
/include/ "fsl/e500v2_power_isa.dtsi"
|
||||
|
||||
/ {
|
||||
model = "MPC8560ADS";
|
||||
compatible = "MPC8560ADS", "MPC85xxADS";
|
||||
|
||||
@ -1,63 +0,0 @@
|
||||
/*
|
||||
* P1020 RDB Core0 Device Tree Source in CAMP mode.
|
||||
*
|
||||
* In CAMP mode, each core needs to have its own dts. Only mpic and L2 cache
|
||||
* can be shared, all the other devices must be assigned to one core only.
|
||||
* This dts file allows core0 to have memory, l2, i2c, spi, gpio, tdm, dma, usb,
|
||||
* eth1, eth2, sdhc, crypto, global-util, message, pci0, pci1, msi.
|
||||
*
|
||||
* Please note to add "-b 0" for core0's dts compiling.
|
||||
*
|
||||
* Copyright 2011 Freescale Semiconductor Inc.
|
||||
*
|
||||
* This program is free software; you can redistribute it and/or modify it
|
||||
* under the terms of the GNU General Public License as published by the
|
||||
* Free Software Foundation; either version 2 of the License, or (at your
|
||||
* option) any later version.
|
||||
*/
|
||||
|
||||
/include/ "p1020rdb.dts"
|
||||
|
||||
/ {
|
||||
model = "fsl,P1020RDB";
|
||||
compatible = "fsl,P1020RDB", "fsl,MPC85XXRDB-CAMP";
|
||||
|
||||
aliases {
|
||||
ethernet1 = &enet1;
|
||||
ethernet2 = &enet2;
|
||||
serial0 = &serial0;
|
||||
pci0 = &pci0;
|
||||
pci1 = &pci1;
|
||||
};
|
||||
|
||||
cpus {
|
||||
PowerPC,P1020@1 {
|
||||
status = "disabled";
|
||||
};
|
||||
};
|
||||
|
||||
memory {
|
||||
device_type = "memory";
|
||||
};
|
||||
|
||||
localbus@ffe05000 {
|
||||
status = "disabled";
|
||||
};
|
||||
|
||||
soc@ffe00000 {
|
||||
serial1: serial@4600 {
|
||||
status = "disabled";
|
||||
};
|
||||
|
||||
enet0: ethernet@b0000 {
|
||||
status = "disabled";
|
||||
};
|
||||
|
||||
mpic: pic@40000 {
|
||||
protected-sources = <
|
||||
42 29 30 34 /* serial1, enet0-queue-group0 */
|
||||
17 18 24 45 /* enet0-queue-group1, crypto */
|
||||
>;
|
||||
};
|
||||
};
|
||||
};
|
||||
@ -1,141 +0,0 @@
|
||||
/*
|
||||
* P1020 RDB Core1 Device Tree Source in CAMP mode.
|
||||
*
|
||||
* In CAMP mode, each core needs to have its own dts. Only mpic and L2 cache
|
||||
* can be shared, all the other devices must be assigned to one core only.
|
||||
* This dts allows core1 to have l2, eth0, crypto.
|
||||
*
|
||||
* Please note to add "-b 1" for core1's dts compiling.
|
||||
*
|
||||
* Copyright 2011 Freescale Semiconductor Inc.
|
||||
*
|
||||
* This program is free software; you can redistribute it and/or modify it
|
||||
* under the terms of the GNU General Public License as published by the
|
||||
* Free Software Foundation; either version 2 of the License, or (at your
|
||||
* option) any later version.
|
||||
*/
|
||||
|
||||
/include/ "p1020rdb.dts"
|
||||
|
||||
/ {
|
||||
model = "fsl,P1020RDB";
|
||||
compatible = "fsl,P1020RDB", "fsl,MPC85XXRDB-CAMP";
|
||||
|
||||
aliases {
|
||||
ethernet0 = &enet0;
|
||||
serial0 = &serial1;
|
||||
};
|
||||
|
||||
cpus {
|
||||
PowerPC,P1020@0 {
|
||||
status = "disabled";
|
||||
};
|
||||
};
|
||||
|
||||
memory {
|
||||
device_type = "memory";
|
||||
};
|
||||
|
||||
localbus@ffe05000 {
|
||||
status = "disabled";
|
||||
};
|
||||
|
||||
soc@ffe00000 {
|
||||
ecm-law@0 {
|
||||
status = "disabled";
|
||||
};
|
||||
|
||||
ecm@1000 {
|
||||
status = "disabled";
|
||||
};
|
||||
|
||||
memory-controller@2000 {
|
||||
status = "disabled";
|
||||
};
|
||||
|
||||
i2c@3000 {
|
||||
status = "disabled";
|
||||
};
|
||||
|
||||
i2c@3100 {
|
||||
status = "disabled";
|
||||
};
|
||||
|
||||
serial0: serial@4500 {
|
||||
status = "disabled";
|
||||
};
|
||||
|
||||
spi@7000 {
|
||||
status = "disabled";
|
||||
};
|
||||
|
||||
gpio: gpio-controller@f000 {
|
||||
status = "disabled";
|
||||
};
|
||||
|
||||
dma@21300 {
|
||||
status = "disabled";
|
||||
};
|
||||
|
||||
mdio@24000 {
|
||||
status = "disabled";
|
||||
};
|
||||
|
||||
mdio@25000 {
|
||||
status = "disabled";
|
||||
};
|
||||
|
||||
enet1: ethernet@b1000 {
|
||||
status = "disabled";
|
||||
};
|
||||
|
||||
enet2: ethernet@b2000 {
|
||||
status = "disabled";
|
||||
};
|
||||
|
||||
usb@22000 {
|
||||
status = "disabled";
|
||||
};
|
||||
|
||||
sdhci@2e000 {
|
||||
status = "disabled";
|
||||
};
|
||||
|
||||
mpic: pic@40000 {
|
||||
protected-sources = <
|
||||
16 /* ecm, mem, L2, pci0, pci1 */
|
||||
43 42 59 /* i2c, serial0, spi */
|
||||
47 63 62 /* gpio, tdm */
|
||||
20 21 22 23 /* dma */
|
||||
03 02 /* mdio */
|
||||
35 36 40 /* enet1-queue-group0 */
|
||||
51 52 67 /* enet1-queue-group1 */
|
||||
31 32 33 /* enet2-queue-group0 */
|
||||
25 26 27 /* enet2-queue-group1 */
|
||||
28 72 58 /* usb, sdhci, crypto */
|
||||
0xb0 0xb1 0xb2 /* message */
|
||||
0xb3 0xb4 0xb5
|
||||
0xb6 0xb7
|
||||
0xe0 0xe1 0xe2 /* msi */
|
||||
0xe3 0xe4 0xe5
|
||||
0xe6 0xe7 /* sdhci, crypto , pci */
|
||||
>;
|
||||
};
|
||||
|
||||
msi@41600 {
|
||||
status = "disabled";
|
||||
};
|
||||
|
||||
global-utilities@e0000 { //global utilities block
|
||||
status = "disabled";
|
||||
};
|
||||
};
|
||||
|
||||
pci0: pcie@ffe09000 {
|
||||
status = "disabled";
|
||||
};
|
||||
|
||||
pci1: pcie@ffe0a000 {
|
||||
status = "disabled";
|
||||
};
|
||||
};
|
||||
@ -149,6 +149,10 @@
|
||||
compatible = "dallas,ds1339";
|
||||
reg = <0x68>;
|
||||
};
|
||||
adt7461@4c {
|
||||
compatible = "adi,adt7461";
|
||||
reg = <0x4c>;
|
||||
};
|
||||
};
|
||||
|
||||
spi@7000 {
|
||||
|
||||
188
arch/powerpc/boot/dts/p1022rdk.dts
Normal file
188
arch/powerpc/boot/dts/p1022rdk.dts
Normal file
@ -0,0 +1,188 @@
|
||||
/*
|
||||
* P1022 RDK 32-bit Physical Address Map Device Tree Source
|
||||
*
|
||||
* Copyright 2012 Freescale Semiconductor Inc.
|
||||
*
|
||||
* Redistribution and use in source and binary forms, with or without
|
||||
* modification, are permitted provided that the following conditions are met:
|
||||
* * Redistributions of source code must retain the above copyright
|
||||
* notice, this list of conditions and the following disclaimer.
|
||||
* * Redistributions in binary form must reproduce the above copyright
|
||||
* notice, this list of conditions and the following disclaimer in the
|
||||
* documentation and/or other materials provided with the distribution.
|
||||
* * Neither the name of Freescale Semiconductor nor the
|
||||
* names of its contributors may be used to endorse or promote products
|
||||
* derived from this software without specific prior written permission.
|
||||
*
|
||||
*
|
||||
* ALTERNATIVELY, this software may be distributed under the terms of the
|
||||
* GNU General Public License ("GPL") as published by the Free Software
|
||||
* Foundation, either version 2 of that License or (at your option) any
|
||||
* later version.
|
||||
*
|
||||
* THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor "AS IS" AND ANY
|
||||
* EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
|
||||
* WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
|
||||
* DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY
|
||||
* DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
|
||||
* (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
|
||||
* LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
|
||||
* ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
|
||||
* (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
|
||||
* SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
|
||||
*/
|
||||
|
||||
/include/ "fsl/p1022si-pre.dtsi"
|
||||
/ {
|
||||
model = "fsl,P1022RDK";
|
||||
compatible = "fsl,P1022RDK";
|
||||
|
||||
memory {
|
||||
device_type = "memory";
|
||||
};
|
||||
|
||||
board_lbc: lbc: localbus@ffe05000 {
|
||||
/* The P1022 RDK does not have any localbus devices */
|
||||
status = "disabled";
|
||||
};
|
||||
|
||||
board_soc: soc: soc@ffe00000 {
|
||||
ranges = <0x0 0x0 0xffe00000 0x100000>;
|
||||
|
||||
i2c@3100 {
|
||||
wm8960:codec@1a {
|
||||
compatible = "wlf,wm8960";
|
||||
reg = <0x1a>;
|
||||
/* MCLK source is a stand-alone oscillator */
|
||||
clock-frequency = <12288000>;
|
||||
};
|
||||
rtc@68 {
|
||||
compatible = "stm,m41t62";
|
||||
reg = <0x68>;
|
||||
};
|
||||
adt7461@4c{
|
||||
compatible = "adi,adt7461";
|
||||
reg = <0x4c>;
|
||||
};
|
||||
zl6100@21{
|
||||
compatible = "isil,zl6100";
|
||||
reg = <0x21>;
|
||||
};
|
||||
zl6100@24{
|
||||
compatible = "isil,zl6100";
|
||||
reg = <0x24>;
|
||||
};
|
||||
zl6100@26{
|
||||
compatible = "isil,zl6100";
|
||||
reg = <0x26>;
|
||||
};
|
||||
zl6100@29{
|
||||
compatible = "isil,zl6100";
|
||||
reg = <0x29>;
|
||||
};
|
||||
};
|
||||
|
||||
spi@7000 {
|
||||
flash@0 {
|
||||
#address-cells = <1>;
|
||||
#size-cells = <1>;
|
||||
compatible = "spansion,m25p80";
|
||||
reg = <0>;
|
||||
spi-max-frequency = <1000000>;
|
||||
partition@0 {
|
||||
label = "full-spi-flash";
|
||||
reg = <0x00000000 0x00100000>;
|
||||
};
|
||||
};
|
||||
};
|
||||
|
||||
ssi@15000 {
|
||||
fsl,mode = "i2s-slave";
|
||||
codec-handle = <&wm8960>;
|
||||
};
|
||||
|
||||
usb@22000 {
|
||||
phy_type = "ulpi";
|
||||
};
|
||||
|
||||
usb@23000 {
|
||||
phy_type = "ulpi";
|
||||
};
|
||||
|
||||
mdio@24000 {
|
||||
phy0: ethernet-phy@0 {
|
||||
interrupts = <3 1 0 0>;
|
||||
reg = <0x1>;
|
||||
};
|
||||
phy1: ethernet-phy@1 {
|
||||
interrupts = <9 1 0 0>;
|
||||
reg = <0x2>;
|
||||
};
|
||||
};
|
||||
|
||||
mdio@25000 {
|
||||
tbi0: tbi-phy@11 {
|
||||
reg = <0x11>;
|
||||
device_type = "tbi-phy";
|
||||
};
|
||||
};
|
||||
|
||||
ethernet@b0000 {
|
||||
phy-handle = <&phy0>;
|
||||
phy-connection-type = "rgmii-id";
|
||||
};
|
||||
|
||||
ethernet@b1000 {
|
||||
phy-handle = <&phy1>;
|
||||
tbi-handle = <&tbi0>;
|
||||
phy-connection-type = "sgmii";
|
||||
};
|
||||
};
|
||||
|
||||
pci0: pcie@ffe09000 {
|
||||
ranges = <0x2000000 0x0 0xe0000000 0 0xa0000000 0x0 0x20000000
|
||||
0x1000000 0x0 0x00000000 0 0xffc10000 0x0 0x10000>;
|
||||
reg = <0x0 0xffe09000 0 0x1000>;
|
||||
pcie@0 {
|
||||
ranges = <0x2000000 0x0 0xe0000000
|
||||
0x2000000 0x0 0xe0000000
|
||||
0x0 0x20000000
|
||||
|
||||
0x1000000 0x0 0x0
|
||||
0x1000000 0x0 0x0
|
||||
0x0 0x100000>;
|
||||
};
|
||||
};
|
||||
|
||||
pci1: pcie@ffe0a000 {
|
||||
ranges = <0x2000000 0x0 0xe0000000 0 0xc0000000 0x0 0x20000000
|
||||
0x1000000 0x0 0x00000000 0 0xffc20000 0x0 0x10000>;
|
||||
reg = <0 0xffe0a000 0 0x1000>;
|
||||
pcie@0 {
|
||||
ranges = <0x2000000 0x0 0xe0000000
|
||||
0x2000000 0x0 0xe0000000
|
||||
0x0 0x20000000
|
||||
|
||||
0x1000000 0x0 0x0
|
||||
0x1000000 0x0 0x0
|
||||
0x0 0x100000>;
|
||||
};
|
||||
};
|
||||
|
||||
pci2: pcie@ffe0b000 {
|
||||
ranges = <0x2000000 0x0 0xe0000000 0 0x80000000 0x0 0x20000000
|
||||
0x1000000 0x0 0x00000000 0 0xffc00000 0x0 0x10000>;
|
||||
reg = <0 0xffe0b000 0 0x1000>;
|
||||
pcie@0 {
|
||||
ranges = <0x2000000 0x0 0xe0000000
|
||||
0x2000000 0x0 0xe0000000
|
||||
0x0 0x20000000
|
||||
|
||||
0x1000000 0x0 0x0
|
||||
0x1000000 0x0 0x0
|
||||
0x0 0x100000>;
|
||||
};
|
||||
};
|
||||
};
|
||||
|
||||
/include/ "fsl/p1022si-post.dtsi"
|
||||
@ -1,67 +0,0 @@
|
||||
/*
|
||||
* P2020 RDB Core0 Device Tree Source in CAMP mode.
|
||||
*
|
||||
* In CAMP mode, each core needs to have its own dts. Only mpic and L2 cache
|
||||
* can be shared, all the other devices must be assigned to one core only.
|
||||
* This dts file allows core0 to have memory, l2, i2c, spi, gpio, dma1, usb,
|
||||
* eth1, eth2, sdhc, crypto, global-util, pci0.
|
||||
*
|
||||
* Copyright 2009-2011 Freescale Semiconductor Inc.
|
||||
*
|
||||
* This program is free software; you can redistribute it and/or modify it
|
||||
* under the terms of the GNU General Public License as published by the
|
||||
* Free Software Foundation; either version 2 of the License, or (at your
|
||||
* option) any later version.
|
||||
*/
|
||||
|
||||
/include/ "p2020rdb.dts"
|
||||
|
||||
/ {
|
||||
model = "fsl,P2020RDB";
|
||||
compatible = "fsl,P2020RDB", "fsl,MPC85XXRDB-CAMP";
|
||||
|
||||
cpus {
|
||||
PowerPC,P2020@1 {
|
||||
status = "disabled";
|
||||
};
|
||||
};
|
||||
|
||||
localbus@ffe05000 {
|
||||
status = "disabled";
|
||||
};
|
||||
|
||||
soc@ffe00000 {
|
||||
serial1: serial@4600 {
|
||||
status = "disabled";
|
||||
};
|
||||
|
||||
dma@c300 {
|
||||
status = "disabled";
|
||||
};
|
||||
|
||||
enet0: ethernet@24000 {
|
||||
status = "disabled";
|
||||
};
|
||||
|
||||
mpic: pic@40000 {
|
||||
protected-sources = <
|
||||
42 76 77 78 79 /* serial1 , dma2 */
|
||||
29 30 34 26 /* enet0, pci1 */
|
||||
0xe0 0xe1 0xe2 0xe3 /* msi */
|
||||
0xe4 0xe5 0xe6 0xe7
|
||||
>;
|
||||
};
|
||||
|
||||
msi@41600 {
|
||||
status = "disabled";
|
||||
};
|
||||
};
|
||||
|
||||
pci0: pcie@ffe08000 {
|
||||
status = "disabled";
|
||||
};
|
||||
|
||||
pci2: pcie@ffe0a000 {
|
||||
status = "disabled";
|
||||
};
|
||||
};
|
||||
@ -1,125 +0,0 @@
|
||||
/*
|
||||
* P2020 RDB Core1 Device Tree Source in CAMP mode.
|
||||
*
|
||||
* In CAMP mode, each core needs to have its own dts. Only mpic and L2 cache
|
||||
* can be shared, all the other devices must be assigned to one core only.
|
||||
* This dts allows core1 to have l2, dma2, eth0, pci1, msi.
|
||||
*
|
||||
* Please note to add "-b 1" for core1's dts compiling.
|
||||
*
|
||||
* Copyright 2009-2011 Freescale Semiconductor Inc.
|
||||
*
|
||||
* This program is free software; you can redistribute it and/or modify it
|
||||
* under the terms of the GNU General Public License as published by the
|
||||
* Free Software Foundation; either version 2 of the License, or (at your
|
||||
* option) any later version.
|
||||
*/
|
||||
|
||||
/include/ "p2020rdb.dts"
|
||||
|
||||
/ {
|
||||
model = "fsl,P2020RDB";
|
||||
compatible = "fsl,P2020RDB", "fsl,MPC85XXRDB-CAMP";
|
||||
|
||||
cpus {
|
||||
PowerPC,P2020@0 {
|
||||
status = "disabled";
|
||||
};
|
||||
};
|
||||
|
||||
localbus@ffe05000 {
|
||||
status = "disabled";
|
||||
};
|
||||
|
||||
soc@ffe00000 {
|
||||
ecm-law@0 {
|
||||
status = "disabled";
|
||||
};
|
||||
|
||||
ecm@1000 {
|
||||
status = "disabled";
|
||||
};
|
||||
|
||||
memory-controller@2000 {
|
||||
status = "disabled";
|
||||
};
|
||||
|
||||
i2c@3000 {
|
||||
status = "disabled";
|
||||
};
|
||||
|
||||
i2c@3100 {
|
||||
status = "disabled";
|
||||
};
|
||||
|
||||
serial0: serial@4500 {
|
||||
status = "disabled";
|
||||
};
|
||||
|
||||
spi@7000 {
|
||||
status = "disabled";
|
||||
};
|
||||
|
||||
gpio: gpio-controller@f000 {
|
||||
status = "disabled";
|
||||
};
|
||||
|
||||
dma@21300 {
|
||||
status = "disabled";
|
||||
};
|
||||
|
||||
usb@22000 {
|
||||
status = "disabled";
|
||||
};
|
||||
|
||||
mdio@24520 {
|
||||
status = "disabled";
|
||||
};
|
||||
|
||||
mdio@25520 {
|
||||
status = "disabled";
|
||||
};
|
||||
|
||||
mdio@26520 {
|
||||
status = "disabled";
|
||||
};
|
||||
|
||||
enet1: ethernet@25000 {
|
||||
status = "disabled";
|
||||
};
|
||||
|
||||
enet2: ethernet@26000 {
|
||||
status = "disabled";
|
||||
};
|
||||
|
||||
sdhci@2e000 {
|
||||
status = "disabled";
|
||||
};
|
||||
|
||||
crypto@30000 {
|
||||
status = "disabled";
|
||||
};
|
||||
|
||||
mpic: pic@40000 {
|
||||
protected-sources = <
|
||||
17 18 43 42 59 47 /*ecm, mem, i2c, serial0, spi,gpio */
|
||||
16 20 21 22 23 28 /* L2, dma1, USB */
|
||||
03 35 36 40 31 32 33 /* mdio, enet1, enet2 */
|
||||
72 45 58 25 /* sdhci, crypto , pci */
|
||||
>;
|
||||
};
|
||||
|
||||
global-utilities@e0000 { //global utilities block
|
||||
status = "disabled";
|
||||
};
|
||||
|
||||
};
|
||||
|
||||
pci0: pcie@ffe08000 {
|
||||
status = "disabled";
|
||||
};
|
||||
|
||||
pci1: pcie@ffe09000 {
|
||||
status = "disabled";
|
||||
};
|
||||
};
|
||||
@ -94,6 +94,10 @@
|
||||
compatible = "pericom,pt7c4338";
|
||||
reg = <0x68>;
|
||||
};
|
||||
adt7461@4c {
|
||||
compatible = "adi,adt7461";
|
||||
reg = <0x4c>;
|
||||
};
|
||||
};
|
||||
|
||||
i2c@118100 {
|
||||
|
||||
@ -98,6 +98,10 @@
|
||||
reg = <0x68>;
|
||||
interrupts = <0x1 0x1 0 0>;
|
||||
};
|
||||
adt7461@4c {
|
||||
compatible = "adi,adt7461";
|
||||
reg = <0x4c>;
|
||||
};
|
||||
};
|
||||
};
|
||||
|
||||
|
||||
@ -96,6 +96,10 @@
|
||||
reg = <0x68>;
|
||||
interrupts = <0x1 0x1 0 0>;
|
||||
};
|
||||
adt7461@4c {
|
||||
compatible = "adi,adt7461";
|
||||
reg = <0x4c>;
|
||||
};
|
||||
};
|
||||
|
||||
usb0: usb@210000 {
|
||||
|
||||
@ -98,6 +98,10 @@
|
||||
reg = <0x68>;
|
||||
interrupts = <0x1 0x1 0 0>;
|
||||
};
|
||||
adt7461@4c {
|
||||
compatible = "adi,adt7461";
|
||||
reg = <0x4c>;
|
||||
};
|
||||
};
|
||||
};
|
||||
|
||||
|
||||
207
arch/powerpc/boot/dts/p5040ds.dts
Normal file
207
arch/powerpc/boot/dts/p5040ds.dts
Normal file
@ -0,0 +1,207 @@
|
||||
/*
|
||||
* P5040DS Device Tree Source
|
||||
*
|
||||
* Copyright 2012 Freescale Semiconductor Inc.
|
||||
*
|
||||
* Redistribution and use in source and binary forms, with or without
|
||||
* modification, are permitted provided that the following conditions are met:
|
||||
* * Redistributions of source code must retain the above copyright
|
||||
* notice, this list of conditions and the following disclaimer.
|
||||
* * Redistributions in binary form must reproduce the above copyright
|
||||
* notice, this list of conditions and the following disclaimer in the
|
||||
* documentation and/or other materials provided with the distribution.
|
||||
* * Neither the name of Freescale Semiconductor nor the
|
||||
* names of its contributors may be used to endorse or promote products
|
||||
* derived from this software without specific prior written permission.
|
||||
*
|
||||
*
|
||||
* ALTERNATIVELY, this software may be distributed under the terms of the
|
||||
* GNU General Public License ("GPL") as published by the Free Software
|
||||
* Foundation, either version 2 of that License or (at your option) any
|
||||
* later version.
|
||||
*
|
||||
* This software is provided by Freescale Semiconductor "as is" and any
|
||||
* express or implied warranties, including, but not limited to, the implied
|
||||
* warranties of merchantability and fitness for a particular purpose are
|
||||
* disclaimed. In no event shall Freescale Semiconductor be liable for any
|
||||
* direct, indirect, incidental, special, exemplary, or consequential damages
|
||||
* (including, but not limited to, procurement of substitute goods or services;
|
||||
* loss of use, data, or profits; or business interruption) however caused and
|
||||
* on any theory of liability, whether in contract, strict liability, or tort
|
||||
* (including negligence or otherwise) arising in any way out of the use of this
|
||||
* software, even if advised of the possibility of such damage.
|
||||
*/
|
||||
|
||||
/include/ "fsl/p5040si-pre.dtsi"
|
||||
|
||||
/ {
|
||||
model = "fsl,P5040DS";
|
||||
compatible = "fsl,P5040DS";
|
||||
#address-cells = <2>;
|
||||
#size-cells = <2>;
|
||||
interrupt-parent = <&mpic>;
|
||||
|
||||
memory {
|
||||
device_type = "memory";
|
||||
};
|
||||
|
||||
dcsr: dcsr@f00000000 {
|
||||
ranges = <0x00000000 0xf 0x00000000 0x01008000>;
|
||||
};
|
||||
|
||||
soc: soc@ffe000000 {
|
||||
ranges = <0x00000000 0xf 0xfe000000 0x1000000>;
|
||||
reg = <0xf 0xfe000000 0 0x00001000>;
|
||||
spi@110000 {
|
||||
flash@0 {
|
||||
#address-cells = <1>;
|
||||
#size-cells = <1>;
|
||||
compatible = "spansion,s25sl12801";
|
||||
reg = <0>;
|
||||
spi-max-frequency = <40000000>; /* input clock */
|
||||
partition@u-boot {
|
||||
label = "u-boot";
|
||||
reg = <0x00000000 0x00100000>;
|
||||
};
|
||||
partition@kernel {
|
||||
label = "kernel";
|
||||
reg = <0x00100000 0x00500000>;
|
||||
};
|
||||
partition@dtb {
|
||||
label = "dtb";
|
||||
reg = <0x00600000 0x00100000>;
|
||||
};
|
||||
partition@fs {
|
||||
label = "file system";
|
||||
reg = <0x00700000 0x00900000>;
|
||||
};
|
||||
};
|
||||
};
|
||||
|
||||
i2c@118100 {
|
||||
eeprom@51 {
|
||||
compatible = "at24,24c256";
|
||||
reg = <0x51>;
|
||||
};
|
||||
eeprom@52 {
|
||||
compatible = "at24,24c256";
|
||||
reg = <0x52>;
|
||||
};
|
||||
};
|
||||
|
||||
i2c@119100 {
|
||||
rtc@68 {
|
||||
compatible = "dallas,ds3232";
|
||||
reg = <0x68>;
|
||||
interrupts = <0x1 0x1 0 0>;
|
||||
};
|
||||
adt7461@4c {
|
||||
compatible = "adi,adt7461";
|
||||
reg = <0x4c>;
|
||||
};
|
||||
};
|
||||
};
|
||||
|
||||
lbc: localbus@ffe124000 {
|
||||
reg = <0xf 0xfe124000 0 0x1000>;
|
||||
ranges = <0 0 0xf 0xe8000000 0x08000000
|
||||
2 0 0xf 0xffa00000 0x00040000
|
||||
3 0 0xf 0xffdf0000 0x00008000>;
|
||||
|
||||
flash@0,0 {
|
||||
compatible = "cfi-flash";
|
||||
reg = <0 0 0x08000000>;
|
||||
bank-width = <2>;
|
||||
device-width = <2>;
|
||||
};
|
||||
|
||||
nand@2,0 {
|
||||
#address-cells = <1>;
|
||||
#size-cells = <1>;
|
||||
compatible = "fsl,elbc-fcm-nand";
|
||||
reg = <0x2 0x0 0x40000>;
|
||||
|
||||
partition@0 {
|
||||
label = "NAND U-Boot Image";
|
||||
reg = <0x0 0x02000000>;
|
||||
};
|
||||
|
||||
partition@2000000 {
|
||||
label = "NAND Root File System";
|
||||
reg = <0x02000000 0x10000000>;
|
||||
};
|
||||
|
||||
partition@12000000 {
|
||||
label = "NAND Compressed RFS Image";
|
||||
reg = <0x12000000 0x08000000>;
|
||||
};
|
||||
|
||||
partition@1a000000 {
|
||||
label = "NAND Linux Kernel Image";
|
||||
reg = <0x1a000000 0x04000000>;
|
||||
};
|
||||
|
||||
partition@1e000000 {
|
||||
label = "NAND DTB Image";
|
||||
reg = <0x1e000000 0x01000000>;
|
||||
};
|
||||
|
||||
partition@1f000000 {
|
||||
label = "NAND Writable User area";
|
||||
reg = <0x1f000000 0x01000000>;
|
||||
};
|
||||
};
|
||||
|
||||
board-control@3,0 {
|
||||
compatible = "fsl,p5040ds-fpga", "fsl,fpga-ngpixis";
|
||||
reg = <3 0 0x40>;
|
||||
};
|
||||
};
|
||||
|
||||
pci0: pcie@ffe200000 {
|
||||
reg = <0xf 0xfe200000 0 0x1000>;
|
||||
ranges = <0x02000000 0 0xe0000000 0xc 0x00000000 0x0 0x20000000
|
||||
0x01000000 0 0x00000000 0xf 0xf8000000 0x0 0x00010000>;
|
||||
pcie@0 {
|
||||
ranges = <0x02000000 0 0xe0000000
|
||||
0x02000000 0 0xe0000000
|
||||
0 0x20000000
|
||||
|
||||
0x01000000 0 0x00000000
|
||||
0x01000000 0 0x00000000
|
||||
0 0x00010000>;
|
||||
};
|
||||
};
|
||||
|
||||
pci1: pcie@ffe201000 {
|
||||
reg = <0xf 0xfe201000 0 0x1000>;
|
||||
ranges = <0x02000000 0x0 0xe0000000 0xc 0x20000000 0x0 0x20000000
|
||||
0x01000000 0x0 0x00000000 0xf 0xf8010000 0x0 0x00010000>;
|
||||
pcie@0 {
|
||||
ranges = <0x02000000 0 0xe0000000
|
||||
0x02000000 0 0xe0000000
|
||||
0 0x20000000
|
||||
|
||||
0x01000000 0 0x00000000
|
||||
0x01000000 0 0x00000000
|
||||
0 0x00010000>;
|
||||
};
|
||||
};
|
||||
|
||||
pci2: pcie@ffe202000 {
|
||||
reg = <0xf 0xfe202000 0 0x1000>;
|
||||
ranges = <0x02000000 0 0xe0000000 0xc 0x40000000 0 0x20000000
|
||||
0x01000000 0 0x00000000 0xf 0xf8020000 0 0x00010000>;
|
||||
pcie@0 {
|
||||
ranges = <0x02000000 0 0xe0000000
|
||||
0x02000000 0 0xe0000000
|
||||
0 0x20000000
|
||||
|
||||
0x01000000 0 0x00000000
|
||||
0x01000000 0 0x00000000
|
||||
0 0x00010000>;
|
||||
};
|
||||
};
|
||||
};
|
||||
|
||||
/include/ "fsl/p5040si-post.dtsi"
|
||||
@ -27,6 +27,7 @@ CONFIG_P2041_RDB=y
|
||||
CONFIG_P3041_DS=y
|
||||
CONFIG_P4080_DS=y
|
||||
CONFIG_P5020_DS=y
|
||||
CONFIG_P5040_DS=y
|
||||
CONFIG_HIGHMEM=y
|
||||
# CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set
|
||||
CONFIG_BINFMT_MISC=m
|
||||
|
||||
@ -23,6 +23,7 @@ CONFIG_MODVERSIONS=y
|
||||
CONFIG_PARTITION_ADVANCED=y
|
||||
CONFIG_MAC_PARTITION=y
|
||||
CONFIG_P5020_DS=y
|
||||
CONFIG_P5040_DS=y
|
||||
# CONFIG_PPC_OF_BOOT_TRAMPOLINE is not set
|
||||
CONFIG_BINFMT_MISC=m
|
||||
CONFIG_IRQ_ALL_CPUS=y
|
||||
|
||||
@ -30,6 +30,7 @@ CONFIG_MPC85xx_DS=y
|
||||
CONFIG_MPC85xx_RDB=y
|
||||
CONFIG_P1010_RDB=y
|
||||
CONFIG_P1022_DS=y
|
||||
CONFIG_P1022_RDK=y
|
||||
CONFIG_P1023_RDS=y
|
||||
CONFIG_SOCRATES=y
|
||||
CONFIG_KSI8560=y
|
||||
|
||||
@ -32,6 +32,7 @@ CONFIG_MPC85xx_DS=y
|
||||
CONFIG_MPC85xx_RDB=y
|
||||
CONFIG_P1010_RDB=y
|
||||
CONFIG_P1022_DS=y
|
||||
CONFIG_P1022_RDK=y
|
||||
CONFIG_P1023_RDS=y
|
||||
CONFIG_SOCRATES=y
|
||||
CONFIG_KSI8560=y
|
||||
|
||||
@ -30,6 +30,8 @@ extern void flush_dcache_page(struct page *page);
|
||||
#define flush_dcache_mmap_lock(mapping) do { } while (0)
|
||||
#define flush_dcache_mmap_unlock(mapping) do { } while (0)
|
||||
|
||||
extern void __flush_disable_L1(void);
|
||||
|
||||
extern void __flush_icache_range(unsigned long, unsigned long);
|
||||
static inline void flush_icache_range(unsigned long start, unsigned long stop)
|
||||
{
|
||||
|
||||
@ -48,6 +48,8 @@ struct ccsr_guts {
|
||||
__be32 dmuxcr; /* 0x.0068 - DMA Mux Control Register */
|
||||
u8 res06c[0x70 - 0x6c];
|
||||
__be32 devdisr; /* 0x.0070 - Device Disable Control */
|
||||
#define CCSR_GUTS_DEVDISR_TB1 0x00001000
|
||||
#define CCSR_GUTS_DEVDISR_TB0 0x00004000
|
||||
__be32 devdisr2; /* 0x.0074 - Device Disable Control 2 */
|
||||
u8 res078[0x7c - 0x78];
|
||||
__be32 pmjcr; /* 0x.007c - 4 Power Management Jog Control Register */
|
||||
|
||||
@ -768,22 +768,24 @@ struct fsl_ifc_gpcm {
|
||||
*/
|
||||
struct fsl_ifc_regs {
|
||||
__be32 ifc_rev;
|
||||
u32 res1[0x3];
|
||||
u32 res1[0x2];
|
||||
struct {
|
||||
__be32 cspr_ext;
|
||||
__be32 cspr;
|
||||
u32 res2[0x2];
|
||||
u32 res2;
|
||||
} cspr_cs[FSL_IFC_BANK_COUNT];
|
||||
u32 res3[0x18];
|
||||
u32 res3[0x19];
|
||||
struct {
|
||||
__be32 amask;
|
||||
u32 res4[0x2];
|
||||
} amask_cs[FSL_IFC_BANK_COUNT];
|
||||
u32 res5[0x18];
|
||||
u32 res5[0x17];
|
||||
struct {
|
||||
__be32 csor_ext;
|
||||
__be32 csor;
|
||||
u32 res6[0x2];
|
||||
u32 res6;
|
||||
} csor_cs[FSL_IFC_BANK_COUNT];
|
||||
u32 res7[0x18];
|
||||
u32 res7[0x19];
|
||||
struct {
|
||||
__be32 ftim[4];
|
||||
u32 res8[0x8];
|
||||
|
||||
@ -63,6 +63,7 @@
|
||||
*/
|
||||
#define MPIC_TIMER_BASE 0x01100
|
||||
#define MPIC_TIMER_STRIDE 0x40
|
||||
#define MPIC_TIMER_GROUP_STRIDE 0x1000
|
||||
|
||||
#define MPIC_TIMER_CURRENT_CNT 0x00000
|
||||
#define MPIC_TIMER_BASE_CNT 0x00010
|
||||
@ -110,10 +111,16 @@
|
||||
#define MPIC_VECPRI_SENSE_MASK 0x00400000
|
||||
#define MPIC_IRQ_DESTINATION 0x00010
|
||||
|
||||
#define MPIC_FSL_BRR1 0x00000
|
||||
#define MPIC_FSL_BRR1_VER 0x0000ffff
|
||||
|
||||
#define MPIC_MAX_IRQ_SOURCES 2048
|
||||
#define MPIC_MAX_CPUS 32
|
||||
#define MPIC_MAX_ISU 32
|
||||
|
||||
#define MPIC_MAX_ERR 32
|
||||
#define MPIC_FSL_ERR_INT 16
|
||||
|
||||
/*
|
||||
* Tsi108 implementation of MPIC has many differences from the original one
|
||||
*/
|
||||
@ -266,6 +273,7 @@ struct mpic
|
||||
struct irq_chip hc_ipi;
|
||||
#endif
|
||||
struct irq_chip hc_tm;
|
||||
struct irq_chip hc_err;
|
||||
const char *name;
|
||||
/* Flags */
|
||||
unsigned int flags;
|
||||
@ -279,6 +287,8 @@ struct mpic
|
||||
/* vector numbers used for internal sources (ipi/timers) */
|
||||
unsigned int ipi_vecs[4];
|
||||
unsigned int timer_vecs[8];
|
||||
/* vector numbers used for FSL MPIC error interrupts */
|
||||
unsigned int err_int_vecs[MPIC_MAX_ERR];
|
||||
|
||||
/* Spurious vector to program into unused sources */
|
||||
unsigned int spurious_vec;
|
||||
@ -296,11 +306,15 @@ struct mpic
|
||||
phys_addr_t paddr;
|
||||
|
||||
/* The various ioremap'ed bases */
|
||||
struct mpic_reg_bank thiscpuregs;
|
||||
struct mpic_reg_bank gregs;
|
||||
struct mpic_reg_bank tmregs;
|
||||
struct mpic_reg_bank cpuregs[MPIC_MAX_CPUS];
|
||||
struct mpic_reg_bank isus[MPIC_MAX_ISU];
|
||||
|
||||
/* ioremap'ed base for error interrupt registers */
|
||||
u32 __iomem *err_regs;
|
||||
|
||||
/* Protected sources */
|
||||
unsigned long *protected;
|
||||
|
||||
@ -365,6 +379,11 @@ struct mpic
|
||||
#define MPIC_NO_RESET 0x00004000
|
||||
/* Freescale MPIC (compatible includes "fsl,mpic") */
|
||||
#define MPIC_FSL 0x00008000
|
||||
/* Freescale MPIC supports EIMR (error interrupt mask register).
|
||||
* This flag is set for MPIC version >= 4.1 (version determined
|
||||
* from the BRR1 register).
|
||||
*/
|
||||
#define MPIC_FSL_HAS_EIMR 0x00010000
|
||||
|
||||
/* MPIC HW modification ID */
|
||||
#define MPIC_REGSET_MASK 0xf0000000
|
||||
|
||||
@ -65,6 +65,7 @@ int generic_cpu_disable(void);
|
||||
void generic_cpu_die(unsigned int cpu);
|
||||
void generic_mach_cpu_die(void);
|
||||
void generic_set_cpu_dead(unsigned int cpu);
|
||||
void generic_set_cpu_up(unsigned int cpu);
|
||||
int generic_check_cpu_restart(unsigned int cpu);
|
||||
#endif
|
||||
|
||||
@ -190,6 +191,7 @@ extern unsigned long __secondary_hold_spinloop;
|
||||
extern unsigned long __secondary_hold_acknowledge;
|
||||
extern char __secondary_hold;
|
||||
|
||||
extern void __early_start(void);
|
||||
#endif /* __ASSEMBLY__ */
|
||||
|
||||
#endif /* __KERNEL__ */
|
||||
|
||||
@ -22,4 +22,10 @@ int __init swiotlb_setup_bus_notifier(void);
|
||||
|
||||
extern void pci_dma_dev_setup_swiotlb(struct pci_dev *pdev);
|
||||
|
||||
#ifdef CONFIG_SWIOTLB
|
||||
void swiotlb_detect_4g(void);
|
||||
#else
|
||||
static inline void swiotlb_detect_4g(void) {}
|
||||
#endif
|
||||
|
||||
#endif /* __ASM_SWIOTLB_H */
|
||||
|
||||
@ -16,6 +16,8 @@
|
||||
#include <asm/processor.h>
|
||||
#include <asm/cputable.h>
|
||||
#include <asm/ppc_asm.h>
|
||||
#include <asm/mmu-book3e.h>
|
||||
#include <asm/asm-offsets.h>
|
||||
|
||||
_GLOBAL(__e500_icache_setup)
|
||||
mfspr r0, SPRN_L1CSR1
|
||||
@ -73,27 +75,81 @@ _GLOBAL(__setup_cpu_e500v2)
|
||||
mtlr r4
|
||||
blr
|
||||
_GLOBAL(__setup_cpu_e500mc)
|
||||
mr r5, r4
|
||||
mflr r4
|
||||
_GLOBAL(__setup_cpu_e5500)
|
||||
mflr r5
|
||||
bl __e500_icache_setup
|
||||
bl __e500_dcache_setup
|
||||
bl __setup_e500mc_ivors
|
||||
mtlr r4
|
||||
/*
|
||||
* We only want to touch IVOR38-41 if we're running on hardware
|
||||
* that supports category E.HV. The architectural way to determine
|
||||
* this is MMUCFG[LPIDSIZE].
|
||||
*/
|
||||
mfspr r3, SPRN_MMUCFG
|
||||
rlwinm. r3, r3, 0, MMUCFG_LPIDSIZE
|
||||
beq 1f
|
||||
bl __setup_ehv_ivors
|
||||
b 2f
|
||||
1:
|
||||
lwz r3, CPU_SPEC_FEATURES(r4)
|
||||
/* We need this check as cpu_setup is also called for
|
||||
* the secondary cores. So, if we have already cleared
|
||||
* the feature on the primary core, avoid doing it on the
|
||||
* secondary core.
|
||||
*/
|
||||
andis. r6, r3, CPU_FTR_EMB_HV@h
|
||||
beq 2f
|
||||
rlwinm r3, r3, 0, ~CPU_FTR_EMB_HV
|
||||
stw r3, CPU_SPEC_FEATURES(r4)
|
||||
2:
|
||||
mtlr r5
|
||||
blr
|
||||
#endif
|
||||
/* Right now, restore and setup are the same thing */
|
||||
|
||||
#ifdef CONFIG_PPC_BOOK3E_64
|
||||
_GLOBAL(__restore_cpu_e5500)
|
||||
_GLOBAL(__setup_cpu_e5500)
|
||||
mflr r4
|
||||
bl __e500_icache_setup
|
||||
bl __e500_dcache_setup
|
||||
#ifdef CONFIG_PPC_BOOK3E_64
|
||||
bl .__setup_base_ivors
|
||||
bl .setup_perfmon_ivor
|
||||
bl .setup_doorbell_ivors
|
||||
/*
|
||||
* We only want to touch IVOR38-41 if we're running on hardware
|
||||
* that supports category E.HV. The architectural way to determine
|
||||
* this is MMUCFG[LPIDSIZE].
|
||||
*/
|
||||
mfspr r10,SPRN_MMUCFG
|
||||
rlwinm. r10,r10,0,MMUCFG_LPIDSIZE
|
||||
beq 1f
|
||||
bl .setup_ehv_ivors
|
||||
#else
|
||||
bl __setup_e500mc_ivors
|
||||
#endif
|
||||
1:
|
||||
mtlr r4
|
||||
blr
|
||||
|
||||
_GLOBAL(__setup_cpu_e5500)
|
||||
mflr r5
|
||||
bl __e500_icache_setup
|
||||
bl __e500_dcache_setup
|
||||
bl .__setup_base_ivors
|
||||
bl .setup_perfmon_ivor
|
||||
bl .setup_doorbell_ivors
|
||||
/*
|
||||
* We only want to touch IVOR38-41 if we're running on hardware
|
||||
* that supports category E.HV. The architectural way to determine
|
||||
* this is MMUCFG[LPIDSIZE].
|
||||
*/
|
||||
mfspr r10,SPRN_MMUCFG
|
||||
rlwinm. r10,r10,0,MMUCFG_LPIDSIZE
|
||||
beq 1f
|
||||
bl .setup_ehv_ivors
|
||||
b 2f
|
||||
1:
|
||||
ld r10,CPU_SPEC_FEATURES(r4)
|
||||
LOAD_REG_IMMEDIATE(r9,CPU_FTR_EMB_HV)
|
||||
andc r10,r10,r9
|
||||
std r10,CPU_SPEC_FEATURES(r4)
|
||||
2:
|
||||
mtlr r5
|
||||
blr
|
||||
#endif
|
||||
|
||||
@ -2016,7 +2016,9 @@ static struct cpu_spec __initdata cpu_specs[] = {
|
||||
.oprofile_cpu_type = "ppc/e500mc",
|
||||
.oprofile_type = PPC_OPROFILE_FSL_EMB,
|
||||
.cpu_setup = __setup_cpu_e5500,
|
||||
#ifndef CONFIG_PPC32
|
||||
.cpu_restore = __restore_cpu_e5500,
|
||||
#endif
|
||||
.machine_check = machine_check_e500mc,
|
||||
.platform = "ppce5500",
|
||||
},
|
||||
@ -2034,7 +2036,9 @@ static struct cpu_spec __initdata cpu_specs[] = {
|
||||
.oprofile_cpu_type = "ppc/e6500",
|
||||
.oprofile_type = PPC_OPROFILE_FSL_EMB,
|
||||
.cpu_setup = __setup_cpu_e5500,
|
||||
#ifndef CONFIG_PPC32
|
||||
.cpu_restore = __restore_cpu_e5500,
|
||||
#endif
|
||||
.machine_check = machine_check_e500mc,
|
||||
.platform = "ppce6500",
|
||||
},
|
||||
|
||||
@ -105,3 +105,23 @@ int __init swiotlb_setup_bus_notifier(void)
|
||||
&ppc_swiotlb_plat_bus_notifier);
|
||||
return 0;
|
||||
}
|
||||
|
||||
void swiotlb_detect_4g(void)
|
||||
{
|
||||
if ((memblock_end_of_DRAM() - 1) > 0xffffffff)
|
||||
ppc_swiotlb_enable = 1;
|
||||
}
|
||||
|
||||
static int __init swiotlb_late_init(void)
|
||||
{
|
||||
if (ppc_swiotlb_enable) {
|
||||
swiotlb_print_info();
|
||||
set_pci_dma_ops(&swiotlb_dma_ops);
|
||||
ppc_md.pci_dma_dev_setup = pci_dma_dev_setup_swiotlb;
|
||||
} else {
|
||||
swiotlb_free();
|
||||
}
|
||||
|
||||
return 0;
|
||||
}
|
||||
subsys_initcall(swiotlb_late_init);
|
||||
|
||||
@ -1356,25 +1356,11 @@ _GLOBAL(setup_perfmon_ivor)
|
||||
_GLOBAL(setup_doorbell_ivors)
|
||||
SET_IVOR(36, 0x280) /* Processor Doorbell */
|
||||
SET_IVOR(37, 0x2a0) /* Processor Doorbell Crit */
|
||||
|
||||
/* Check MMUCFG[LPIDSIZE] to determine if we have category E.HV */
|
||||
mfspr r10,SPRN_MMUCFG
|
||||
rlwinm. r10,r10,0,MMUCFG_LPIDSIZE
|
||||
beqlr
|
||||
|
||||
SET_IVOR(38, 0x2c0) /* Guest Processor Doorbell */
|
||||
SET_IVOR(39, 0x2e0) /* Guest Processor Doorbell Crit/MC */
|
||||
blr
|
||||
|
||||
_GLOBAL(setup_ehv_ivors)
|
||||
/*
|
||||
* We may be running as a guest and lack E.HV even on a chip
|
||||
* that normally has it.
|
||||
*/
|
||||
mfspr r10,SPRN_MMUCFG
|
||||
rlwinm. r10,r10,0,MMUCFG_LPIDSIZE
|
||||
beqlr
|
||||
|
||||
SET_IVOR(40, 0x300) /* Embedded Hypervisor System Call */
|
||||
SET_IVOR(41, 0x320) /* Embedded Hypervisor Privilege */
|
||||
SET_IVOR(38, 0x2c0) /* Guest Processor Doorbell */
|
||||
SET_IVOR(39, 0x2e0) /* Guest Processor Doorbell Crit/MC */
|
||||
blr
|
||||
|
||||
@ -895,15 +895,11 @@ _GLOBAL(__setup_e500mc_ivors)
|
||||
mtspr SPRN_IVOR36,r3
|
||||
li r3,CriticalDoorbell@l
|
||||
mtspr SPRN_IVOR37,r3
|
||||
sync
|
||||
blr
|
||||
|
||||
/*
|
||||
* We only want to touch IVOR38-41 if we're running on hardware
|
||||
* that supports category E.HV. The architectural way to determine
|
||||
* this is MMUCFG[LPIDSIZE].
|
||||
*/
|
||||
mfspr r3, SPRN_MMUCFG
|
||||
andis. r3, r3, MMUCFG_LPIDSIZE@h
|
||||
beq no_hv
|
||||
/* setup ehv ivors for */
|
||||
_GLOBAL(__setup_ehv_ivors)
|
||||
li r3,GuestDoorbell@l
|
||||
mtspr SPRN_IVOR38,r3
|
||||
li r3,CriticalGuestDoorbell@l
|
||||
@ -912,14 +908,8 @@ _GLOBAL(__setup_e500mc_ivors)
|
||||
mtspr SPRN_IVOR40,r3
|
||||
li r3,Ehvpriv@l
|
||||
mtspr SPRN_IVOR41,r3
|
||||
skip_hv_ivors:
|
||||
sync
|
||||
blr
|
||||
no_hv:
|
||||
lwz r3, CPU_SPEC_FEATURES(r5)
|
||||
rlwinm r3, r3, 0, ~CPU_FTR_EMB_HV
|
||||
stw r3, CPU_SPEC_FEATURES(r5)
|
||||
b skip_hv_ivors
|
||||
|
||||
#ifdef CONFIG_SPE
|
||||
/*
|
||||
@ -1043,6 +1033,34 @@ _GLOBAL(flush_dcache_L1)
|
||||
|
||||
blr
|
||||
|
||||
/* Flush L1 d-cache, invalidate and disable d-cache and i-cache */
|
||||
_GLOBAL(__flush_disable_L1)
|
||||
mflr r10
|
||||
bl flush_dcache_L1 /* Flush L1 d-cache */
|
||||
mtlr r10
|
||||
|
||||
mfspr r4, SPRN_L1CSR0 /* Invalidate and disable d-cache */
|
||||
li r5, 2
|
||||
rlwimi r4, r5, 0, 3
|
||||
|
||||
msync
|
||||
isync
|
||||
mtspr SPRN_L1CSR0, r4
|
||||
isync
|
||||
|
||||
1: mfspr r4, SPRN_L1CSR0 /* Wait for the invalidate to finish */
|
||||
andi. r4, r4, 2
|
||||
bne 1b
|
||||
|
||||
mfspr r4, SPRN_L1CSR1 /* Invalidate and disable i-cache */
|
||||
li r5, 2
|
||||
rlwimi r4, r5, 0, 3
|
||||
|
||||
mtspr SPRN_L1CSR1, r4
|
||||
isync
|
||||
|
||||
blr
|
||||
|
||||
#ifdef CONFIG_SMP
|
||||
/* When we get here, r24 needs to hold the CPU # */
|
||||
.globl __secondary_start
|
||||
|
||||
@ -102,7 +102,7 @@ int __devinit smp_generic_kick_cpu(int nr)
|
||||
* Ok it's not there, so it might be soft-unplugged, let's
|
||||
* try to bring it back
|
||||
*/
|
||||
per_cpu(cpu_state, nr) = CPU_UP_PREPARE;
|
||||
generic_set_cpu_up(nr);
|
||||
smp_wmb();
|
||||
smp_send_reschedule(nr);
|
||||
#endif /* CONFIG_HOTPLUG_CPU */
|
||||
@ -413,6 +413,16 @@ void generic_set_cpu_dead(unsigned int cpu)
|
||||
per_cpu(cpu_state, cpu) = CPU_DEAD;
|
||||
}
|
||||
|
||||
/*
|
||||
* The cpu_state should be set to CPU_UP_PREPARE in kick_cpu(), otherwise
|
||||
* the cpu_state is always CPU_DEAD after calling generic_set_cpu_dead(),
|
||||
* which makes the delay in generic_cpu_die() not happen.
|
||||
*/
|
||||
void generic_set_cpu_up(unsigned int cpu)
|
||||
{
|
||||
per_cpu(cpu_state, cpu) = CPU_UP_PREPARE;
|
||||
}
|
||||
|
||||
int generic_check_cpu_restart(unsigned int cpu)
|
||||
{
|
||||
return per_cpu(cpu_state, cpu) == CPU_UP_PREPARE;
|
||||
|
||||
@ -300,8 +300,7 @@ void __init mem_init(void)
|
||||
unsigned long reservedpages = 0, codesize, initsize, datasize, bsssize;
|
||||
|
||||
#ifdef CONFIG_SWIOTLB
|
||||
if (ppc_swiotlb_enable)
|
||||
swiotlb_init(1);
|
||||
swiotlb_init(0);
|
||||
#endif
|
||||
|
||||
num_physpages = memblock_phys_mem_size() >> PAGE_SHIFT;
|
||||
|
||||
@ -21,7 +21,6 @@
|
||||
*/
|
||||
|
||||
#include <linux/init.h>
|
||||
#include <linux/memblock.h>
|
||||
#include <linux/of.h>
|
||||
#include <linux/of_platform.h>
|
||||
#include <linux/rtc.h>
|
||||
@ -159,13 +158,8 @@ static void __init ppc47x_setup_arch(void)
|
||||
|
||||
/* No need to check the DMA config as we /know/ our windows are all of
|
||||
* RAM. Lets hope that doesn't change */
|
||||
#ifdef CONFIG_SWIOTLB
|
||||
if ((memblock_end_of_DRAM() - 1) > 0xffffffff) {
|
||||
ppc_swiotlb_enable = 1;
|
||||
set_pci_dma_ops(&swiotlb_dma_ops);
|
||||
ppc_md.pci_dma_dev_setup = pci_dma_dev_setup_swiotlb;
|
||||
}
|
||||
#endif
|
||||
swiotlb_detect_4g();
|
||||
|
||||
ppc47x_smp_init();
|
||||
}
|
||||
|
||||
|
||||
@ -104,6 +104,13 @@ config P1022_DS
|
||||
help
|
||||
This option enables support for the Freescale P1022DS reference board.
|
||||
|
||||
config P1022_RDK
|
||||
bool "Freescale / iVeia P1022 RDK"
|
||||
select DEFAULT_UIMAGE
|
||||
help
|
||||
This option enables support for the Freescale / iVeia P1022RDK
|
||||
reference board.
|
||||
|
||||
config P1023_RDS
|
||||
bool "Freescale P1023 RDS"
|
||||
select DEFAULT_UIMAGE
|
||||
@ -254,6 +261,20 @@ config P5020_DS
|
||||
help
|
||||
This option enables support for the P5020 DS board
|
||||
|
||||
config P5040_DS
|
||||
bool "Freescale P5040 DS"
|
||||
select DEFAULT_UIMAGE
|
||||
select E500
|
||||
select PPC_E500MC
|
||||
select PHYS_64BIT
|
||||
select SWIOTLB
|
||||
select ARCH_REQUIRE_GPIOLIB
|
||||
select GPIO_MPC8XXX
|
||||
select HAS_RAPIDIO
|
||||
select PPC_EPAPR_HV_PIC
|
||||
help
|
||||
This option enables support for the P5040 DS board
|
||||
|
||||
config PPC_QEMU_E500
|
||||
bool "QEMU generic e500 platform"
|
||||
depends on EXPERIMENTAL
|
||||
|
||||
@ -15,11 +15,13 @@ obj-$(CONFIG_MPC85xx_MDS) += mpc85xx_mds.o
|
||||
obj-$(CONFIG_MPC85xx_RDB) += mpc85xx_rdb.o
|
||||
obj-$(CONFIG_P1010_RDB) += p1010rdb.o
|
||||
obj-$(CONFIG_P1022_DS) += p1022_ds.o
|
||||
obj-$(CONFIG_P1022_RDK) += p1022_rdk.o
|
||||
obj-$(CONFIG_P1023_RDS) += p1023_rds.o
|
||||
obj-$(CONFIG_P2041_RDB) += p2041_rdb.o corenet_ds.o
|
||||
obj-$(CONFIG_P3041_DS) += p3041_ds.o corenet_ds.o
|
||||
obj-$(CONFIG_P4080_DS) += p4080_ds.o corenet_ds.o
|
||||
obj-$(CONFIG_P5020_DS) += p5020_ds.o corenet_ds.o
|
||||
obj-$(CONFIG_P5040_DS) += p5040_ds.o corenet_ds.o
|
||||
obj-$(CONFIG_STX_GP3) += stx_gp3.o
|
||||
obj-$(CONFIG_TQM85xx) += tqm85xx.o
|
||||
obj-$(CONFIG_SBC8548) += sbc8548.o
|
||||
|
||||
@ -27,6 +27,16 @@ static struct of_device_id __initdata mpc85xx_common_ids[] = {
|
||||
{ .compatible = "fsl,mpc8548-guts", },
|
||||
/* Probably unnecessary? */
|
||||
{ .compatible = "gpio-leds", },
|
||||
/* For all PCI controllers */
|
||||
{ .compatible = "fsl,mpc8540-pci", },
|
||||
{ .compatible = "fsl,mpc8548-pcie", },
|
||||
{ .compatible = "fsl,p1022-pcie", },
|
||||
{ .compatible = "fsl,p1010-pcie", },
|
||||
{ .compatible = "fsl,p1023-pcie", },
|
||||
{ .compatible = "fsl,p4080-pcie", },
|
||||
{ .compatible = "fsl,qoriq-pcie-v2.4", },
|
||||
{ .compatible = "fsl,qoriq-pcie-v2.3", },
|
||||
{ .compatible = "fsl,qoriq-pcie-v2.2", },
|
||||
{},
|
||||
};
|
||||
|
||||
|
||||
@ -16,7 +16,6 @@
|
||||
#include <linux/kdev_t.h>
|
||||
#include <linux/delay.h>
|
||||
#include <linux/interrupt.h>
|
||||
#include <linux/memblock.h>
|
||||
|
||||
#include <asm/time.h>
|
||||
#include <asm/machdep.h>
|
||||
@ -52,37 +51,16 @@ void __init corenet_ds_pic_init(void)
|
||||
*/
|
||||
void __init corenet_ds_setup_arch(void)
|
||||
{
|
||||
#ifdef CONFIG_PCI
|
||||
struct device_node *np;
|
||||
struct pci_controller *hose;
|
||||
#endif
|
||||
dma_addr_t max = 0xffffffff;
|
||||
|
||||
mpc85xx_smp_init();
|
||||
|
||||
#ifdef CONFIG_PCI
|
||||
for_each_node_by_type(np, "pci") {
|
||||
if (of_device_is_compatible(np, "fsl,p4080-pcie") ||
|
||||
of_device_is_compatible(np, "fsl,qoriq-pcie-v2.2")) {
|
||||
fsl_add_bridge(np, 0);
|
||||
hose = pci_find_hose_for_OF_device(np);
|
||||
max = min(max, hose->dma_window_base_cur +
|
||||
hose->dma_window_size);
|
||||
}
|
||||
}
|
||||
|
||||
#ifdef CONFIG_PPC64
|
||||
#if defined(CONFIG_PCI) && defined(CONFIG_PPC64)
|
||||
pci_devs_phb_init();
|
||||
#endif
|
||||
#endif
|
||||
|
||||
#ifdef CONFIG_SWIOTLB
|
||||
if ((memblock_end_of_DRAM() - 1) > max) {
|
||||
ppc_swiotlb_enable = 1;
|
||||
set_pci_dma_ops(&swiotlb_dma_ops);
|
||||
ppc_md.pci_dma_dev_setup = pci_dma_dev_setup_swiotlb;
|
||||
}
|
||||
#endif
|
||||
fsl_pci_assign_primary();
|
||||
|
||||
swiotlb_detect_4g();
|
||||
|
||||
pr_info("%s board from Freescale Semiconductor\n", ppc_md.name);
|
||||
}
|
||||
|
||||
@ -99,6 +77,12 @@ static const struct of_device_id of_device_ids[] __devinitconst = {
|
||||
{
|
||||
.compatible = "fsl,qoriq-pcie-v2.2",
|
||||
},
|
||||
{
|
||||
.compatible = "fsl,qoriq-pcie-v2.3",
|
||||
},
|
||||
{
|
||||
.compatible = "fsl,qoriq-pcie-v2.4",
|
||||
},
|
||||
/* The following two are for the Freescale hypervisor */
|
||||
{
|
||||
.name = "hypervisor",
|
||||
|
||||
@ -22,7 +22,6 @@
|
||||
#include <linux/seq_file.h>
|
||||
#include <linux/interrupt.h>
|
||||
#include <linux/of_platform.h>
|
||||
#include <linux/memblock.h>
|
||||
|
||||
#include <asm/time.h>
|
||||
#include <asm/machdep.h>
|
||||
@ -84,9 +83,23 @@ void __init ge_imp3a_pic_init(void)
|
||||
of_node_put(cascade_node);
|
||||
}
|
||||
|
||||
static void ge_imp3a_pci_assign_primary(void)
|
||||
{
|
||||
#ifdef CONFIG_PCI
|
||||
static int primary_phb_addr;
|
||||
#endif /* CONFIG_PCI */
|
||||
struct device_node *np;
|
||||
struct resource rsrc;
|
||||
|
||||
for_each_node_by_type(np, "pci") {
|
||||
if (of_device_is_compatible(np, "fsl,mpc8540-pci") ||
|
||||
of_device_is_compatible(np, "fsl,mpc8548-pcie") ||
|
||||
of_device_is_compatible(np, "fsl,p2020-pcie")) {
|
||||
of_address_to_resource(np, 0, &rsrc);
|
||||
if ((rsrc.start & 0xfffff) == 0x9000)
|
||||
fsl_pci_primary = np;
|
||||
}
|
||||
}
|
||||
#endif
|
||||
}
|
||||
|
||||
/*
|
||||
* Setup the architecture
|
||||
@ -94,43 +107,15 @@ static int primary_phb_addr;
|
||||
static void __init ge_imp3a_setup_arch(void)
|
||||
{
|
||||
struct device_node *regs;
|
||||
#ifdef CONFIG_PCI
|
||||
struct device_node *np;
|
||||
struct pci_controller *hose;
|
||||
#endif
|
||||
dma_addr_t max = 0xffffffff;
|
||||
|
||||
if (ppc_md.progress)
|
||||
ppc_md.progress("ge_imp3a_setup_arch()", 0);
|
||||
|
||||
#ifdef CONFIG_PCI
|
||||
for_each_node_by_type(np, "pci") {
|
||||
if (of_device_is_compatible(np, "fsl,mpc8540-pci") ||
|
||||
of_device_is_compatible(np, "fsl,mpc8548-pcie") ||
|
||||
of_device_is_compatible(np, "fsl,p2020-pcie")) {
|
||||
struct resource rsrc;
|
||||
of_address_to_resource(np, 0, &rsrc);
|
||||
if ((rsrc.start & 0xfffff) == primary_phb_addr)
|
||||
fsl_add_bridge(np, 1);
|
||||
else
|
||||
fsl_add_bridge(np, 0);
|
||||
|
||||
hose = pci_find_hose_for_OF_device(np);
|
||||
max = min(max, hose->dma_window_base_cur +
|
||||
hose->dma_window_size);
|
||||
}
|
||||
}
|
||||
#endif
|
||||
|
||||
mpc85xx_smp_init();
|
||||
|
||||
#ifdef CONFIG_SWIOTLB
|
||||
if ((memblock_end_of_DRAM() - 1) > max) {
|
||||
ppc_swiotlb_enable = 1;
|
||||
set_pci_dma_ops(&swiotlb_dma_ops);
|
||||
ppc_md.pci_dma_dev_setup = pci_dma_dev_setup_swiotlb;
|
||||
}
|
||||
#endif
|
||||
ge_imp3a_pci_assign_primary();
|
||||
|
||||
swiotlb_detect_4g();
|
||||
|
||||
/* Remap basic board registers */
|
||||
regs = of_find_compatible_node(NULL, NULL, "ge,imp3a-fpga-regs");
|
||||
@ -215,17 +200,10 @@ static int __init ge_imp3a_probe(void)
|
||||
{
|
||||
unsigned long root = of_get_flat_dt_root();
|
||||
|
||||
if (of_flat_dt_is_compatible(root, "ge,IMP3A")) {
|
||||
#ifdef CONFIG_PCI
|
||||
primary_phb_addr = 0x9000;
|
||||
#endif
|
||||
return 1;
|
||||
}
|
||||
|
||||
return 0;
|
||||
return of_flat_dt_is_compatible(root, "ge,IMP3A");
|
||||
}
|
||||
|
||||
machine_device_initcall(ge_imp3a, mpc85xx_common_publish_devices);
|
||||
machine_arch_initcall(ge_imp3a, mpc85xx_common_publish_devices);
|
||||
|
||||
machine_arch_initcall(ge_imp3a, swiotlb_setup_bus_notifier);
|
||||
|
||||
|
||||
@ -17,7 +17,6 @@
|
||||
#include <linux/seq_file.h>
|
||||
#include <linux/interrupt.h>
|
||||
#include <linux/of_platform.h>
|
||||
#include <linux/memblock.h>
|
||||
|
||||
#include <asm/time.h>
|
||||
#include <asm/machdep.h>
|
||||
@ -46,46 +45,17 @@ void __init mpc8536_ds_pic_init(void)
|
||||
*/
|
||||
static void __init mpc8536_ds_setup_arch(void)
|
||||
{
|
||||
#ifdef CONFIG_PCI
|
||||
struct device_node *np;
|
||||
struct pci_controller *hose;
|
||||
#endif
|
||||
dma_addr_t max = 0xffffffff;
|
||||
|
||||
if (ppc_md.progress)
|
||||
ppc_md.progress("mpc8536_ds_setup_arch()", 0);
|
||||
|
||||
#ifdef CONFIG_PCI
|
||||
for_each_node_by_type(np, "pci") {
|
||||
if (of_device_is_compatible(np, "fsl,mpc8540-pci") ||
|
||||
of_device_is_compatible(np, "fsl,mpc8548-pcie")) {
|
||||
struct resource rsrc;
|
||||
of_address_to_resource(np, 0, &rsrc);
|
||||
if ((rsrc.start & 0xfffff) == 0x8000)
|
||||
fsl_add_bridge(np, 1);
|
||||
else
|
||||
fsl_add_bridge(np, 0);
|
||||
fsl_pci_assign_primary();
|
||||
|
||||
hose = pci_find_hose_for_OF_device(np);
|
||||
max = min(max, hose->dma_window_base_cur +
|
||||
hose->dma_window_size);
|
||||
}
|
||||
}
|
||||
|
||||
#endif
|
||||
|
||||
#ifdef CONFIG_SWIOTLB
|
||||
if ((memblock_end_of_DRAM() - 1) > max) {
|
||||
ppc_swiotlb_enable = 1;
|
||||
set_pci_dma_ops(&swiotlb_dma_ops);
|
||||
ppc_md.pci_dma_dev_setup = pci_dma_dev_setup_swiotlb;
|
||||
}
|
||||
#endif
|
||||
swiotlb_detect_4g();
|
||||
|
||||
printk("MPC8536 DS board from Freescale Semiconductor\n");
|
||||
}
|
||||
|
||||
machine_device_initcall(mpc8536_ds, mpc85xx_common_publish_devices);
|
||||
machine_arch_initcall(mpc8536_ds, mpc85xx_common_publish_devices);
|
||||
|
||||
machine_arch_initcall(mpc8536_ds, swiotlb_setup_bus_notifier);
|
||||
|
||||
|
||||
@ -137,10 +137,6 @@ static void __init init_ioports(void)
|
||||
|
||||
static void __init mpc85xx_ads_setup_arch(void)
|
||||
{
|
||||
#ifdef CONFIG_PCI
|
||||
struct device_node *np;
|
||||
#endif
|
||||
|
||||
if (ppc_md.progress)
|
||||
ppc_md.progress("mpc85xx_ads_setup_arch()", 0);
|
||||
|
||||
@ -150,11 +146,10 @@ static void __init mpc85xx_ads_setup_arch(void)
|
||||
#endif
|
||||
|
||||
#ifdef CONFIG_PCI
|
||||
for_each_compatible_node(np, "pci", "fsl,mpc8540-pci")
|
||||
fsl_add_bridge(np, 1);
|
||||
|
||||
ppc_md.pci_exclude_device = mpc85xx_exclude_device;
|
||||
#endif
|
||||
|
||||
fsl_pci_assign_primary();
|
||||
}
|
||||
|
||||
static void mpc85xx_ads_show_cpuinfo(struct seq_file *m)
|
||||
@ -173,7 +168,7 @@ static void mpc85xx_ads_show_cpuinfo(struct seq_file *m)
|
||||
seq_printf(m, "PLL setting\t: 0x%x\n", ((phid1 >> 24) & 0x3f));
|
||||
}
|
||||
|
||||
machine_device_initcall(mpc85xx_ads, mpc85xx_common_publish_devices);
|
||||
machine_arch_initcall(mpc85xx_ads, mpc85xx_common_publish_devices);
|
||||
|
||||
/*
|
||||
* Called very early, device-tree isn't unflattened
|
||||
|
||||
@ -276,6 +276,33 @@ machine_device_initcall(mpc85xx_cds, mpc85xx_cds_8259_attach);
|
||||
|
||||
#endif /* CONFIG_PPC_I8259 */
|
||||
|
||||
static void mpc85xx_cds_pci_assign_primary(void)
|
||||
{
|
||||
#ifdef CONFIG_PCI
|
||||
struct device_node *np;
|
||||
|
||||
if (fsl_pci_primary)
|
||||
return;
|
||||
|
||||
/*
|
||||
* MPC85xx_CDS has ISA bridge but unfortunately there is no
|
||||
* isa node in device tree. We now looking for i8259 node as
|
||||
* a workaround for such a broken device tree. This routine
|
||||
* is for complying to all device trees.
|
||||
*/
|
||||
np = of_find_node_by_name(NULL, "i8259");
|
||||
while ((fsl_pci_primary = of_get_parent(np))) {
|
||||
of_node_put(np);
|
||||
np = fsl_pci_primary;
|
||||
|
||||
if ((of_device_is_compatible(np, "fsl,mpc8540-pci") ||
|
||||
of_device_is_compatible(np, "fsl,mpc8548-pcie")) &&
|
||||
of_device_is_available(np))
|
||||
return;
|
||||
}
|
||||
#endif
|
||||
}
|
||||
|
||||
/*
|
||||
* Setup the architecture
|
||||
*/
|
||||
@ -309,21 +336,12 @@ static void __init mpc85xx_cds_setup_arch(void)
|
||||
}
|
||||
|
||||
#ifdef CONFIG_PCI
|
||||
for_each_node_by_type(np, "pci") {
|
||||
if (of_device_is_compatible(np, "fsl,mpc8540-pci") ||
|
||||
of_device_is_compatible(np, "fsl,mpc8548-pcie")) {
|
||||
struct resource rsrc;
|
||||
of_address_to_resource(np, 0, &rsrc);
|
||||
if ((rsrc.start & 0xfffff) == 0x8000)
|
||||
fsl_add_bridge(np, 1);
|
||||
else
|
||||
fsl_add_bridge(np, 0);
|
||||
}
|
||||
}
|
||||
|
||||
ppc_md.pci_irq_fixup = mpc85xx_cds_pci_irq_fixup;
|
||||
ppc_md.pci_exclude_device = mpc85xx_exclude_device;
|
||||
#endif
|
||||
|
||||
mpc85xx_cds_pci_assign_primary();
|
||||
fsl_pci_assign_primary();
|
||||
}
|
||||
|
||||
static void mpc85xx_cds_show_cpuinfo(struct seq_file *m)
|
||||
@ -355,7 +373,7 @@ static int __init mpc85xx_cds_probe(void)
|
||||
return of_flat_dt_is_compatible(root, "MPC85xxCDS");
|
||||
}
|
||||
|
||||
machine_device_initcall(mpc85xx_cds, mpc85xx_common_publish_devices);
|
||||
machine_arch_initcall(mpc85xx_cds, mpc85xx_common_publish_devices);
|
||||
|
||||
define_machine(mpc85xx_cds) {
|
||||
.name = "MPC85xx CDS",
|
||||
|
||||
@ -20,7 +20,6 @@
|
||||
#include <linux/seq_file.h>
|
||||
#include <linux/interrupt.h>
|
||||
#include <linux/of_platform.h>
|
||||
#include <linux/memblock.h>
|
||||
|
||||
#include <asm/time.h>
|
||||
#include <asm/machdep.h>
|
||||
@ -129,13 +128,11 @@ static int mpc85xx_exclude_device(struct pci_controller *hose,
|
||||
}
|
||||
#endif /* CONFIG_PCI */
|
||||
|
||||
static void __init mpc85xx_ds_pci_init(void)
|
||||
static void __init mpc85xx_ds_uli_init(void)
|
||||
{
|
||||
#ifdef CONFIG_PCI
|
||||
struct device_node *node;
|
||||
|
||||
fsl_pci_init();
|
||||
|
||||
/* See if we have a ULI under the primary */
|
||||
|
||||
node = of_find_node_by_name(NULL, "uli1575");
|
||||
@ -159,7 +156,9 @@ static void __init mpc85xx_ds_setup_arch(void)
|
||||
if (ppc_md.progress)
|
||||
ppc_md.progress("mpc85xx_ds_setup_arch()", 0);
|
||||
|
||||
mpc85xx_ds_pci_init();
|
||||
swiotlb_detect_4g();
|
||||
fsl_pci_assign_primary();
|
||||
mpc85xx_ds_uli_init();
|
||||
mpc85xx_smp_init();
|
||||
|
||||
printk("MPC85xx DS board from Freescale Semiconductor\n");
|
||||
@ -175,9 +174,9 @@ static int __init mpc8544_ds_probe(void)
|
||||
return !!of_flat_dt_is_compatible(root, "MPC8544DS");
|
||||
}
|
||||
|
||||
machine_device_initcall(mpc8544_ds, mpc85xx_common_publish_devices);
|
||||
machine_device_initcall(mpc8572_ds, mpc85xx_common_publish_devices);
|
||||
machine_device_initcall(p2020_ds, mpc85xx_common_publish_devices);
|
||||
machine_arch_initcall(mpc8544_ds, mpc85xx_common_publish_devices);
|
||||
machine_arch_initcall(mpc8572_ds, mpc85xx_common_publish_devices);
|
||||
machine_arch_initcall(p2020_ds, mpc85xx_common_publish_devices);
|
||||
|
||||
machine_arch_initcall(mpc8544_ds, swiotlb_setup_bus_notifier);
|
||||
machine_arch_initcall(mpc8572_ds, swiotlb_setup_bus_notifier);
|
||||
|
||||
@ -327,44 +327,16 @@ static void __init mpc85xx_mds_qeic_init(void) { }
|
||||
|
||||
static void __init mpc85xx_mds_setup_arch(void)
|
||||
{
|
||||
#ifdef CONFIG_PCI
|
||||
struct pci_controller *hose;
|
||||
struct device_node *np;
|
||||
#endif
|
||||
dma_addr_t max = 0xffffffff;
|
||||
|
||||
if (ppc_md.progress)
|
||||
ppc_md.progress("mpc85xx_mds_setup_arch()", 0);
|
||||
|
||||
#ifdef CONFIG_PCI
|
||||
for_each_node_by_type(np, "pci") {
|
||||
if (of_device_is_compatible(np, "fsl,mpc8540-pci") ||
|
||||
of_device_is_compatible(np, "fsl,mpc8548-pcie")) {
|
||||
struct resource rsrc;
|
||||
of_address_to_resource(np, 0, &rsrc);
|
||||
if ((rsrc.start & 0xfffff) == 0x8000)
|
||||
fsl_add_bridge(np, 1);
|
||||
else
|
||||
fsl_add_bridge(np, 0);
|
||||
|
||||
hose = pci_find_hose_for_OF_device(np);
|
||||
max = min(max, hose->dma_window_base_cur +
|
||||
hose->dma_window_size);
|
||||
}
|
||||
}
|
||||
#endif
|
||||
|
||||
mpc85xx_smp_init();
|
||||
|
||||
mpc85xx_mds_qe_init();
|
||||
|
||||
#ifdef CONFIG_SWIOTLB
|
||||
if ((memblock_end_of_DRAM() - 1) > max) {
|
||||
ppc_swiotlb_enable = 1;
|
||||
set_pci_dma_ops(&swiotlb_dma_ops);
|
||||
ppc_md.pci_dma_dev_setup = pci_dma_dev_setup_swiotlb;
|
||||
}
|
||||
#endif
|
||||
fsl_pci_assign_primary();
|
||||
|
||||
swiotlb_detect_4g();
|
||||
}
|
||||
|
||||
|
||||
@ -409,9 +381,9 @@ static int __init mpc85xx_publish_devices(void)
|
||||
return mpc85xx_common_publish_devices();
|
||||
}
|
||||
|
||||
machine_device_initcall(mpc8568_mds, mpc85xx_publish_devices);
|
||||
machine_device_initcall(mpc8569_mds, mpc85xx_publish_devices);
|
||||
machine_device_initcall(p1021_mds, mpc85xx_common_publish_devices);
|
||||
machine_arch_initcall(mpc8568_mds, mpc85xx_publish_devices);
|
||||
machine_arch_initcall(mpc8569_mds, mpc85xx_publish_devices);
|
||||
machine_arch_initcall(p1021_mds, mpc85xx_common_publish_devices);
|
||||
|
||||
machine_arch_initcall(mpc8568_mds, swiotlb_setup_bus_notifier);
|
||||
machine_arch_initcall(mpc8569_mds, swiotlb_setup_bus_notifier);
|
||||
|
||||
@ -86,23 +86,17 @@ void __init mpc85xx_rdb_pic_init(void)
|
||||
*/
|
||||
static void __init mpc85xx_rdb_setup_arch(void)
|
||||
{
|
||||
#if defined(CONFIG_PCI) || defined(CONFIG_QUICC_ENGINE)
|
||||
#ifdef CONFIG_QUICC_ENGINE
|
||||
struct device_node *np;
|
||||
#endif
|
||||
|
||||
if (ppc_md.progress)
|
||||
ppc_md.progress("mpc85xx_rdb_setup_arch()", 0);
|
||||
|
||||
#ifdef CONFIG_PCI
|
||||
for_each_node_by_type(np, "pci") {
|
||||
if (of_device_is_compatible(np, "fsl,mpc8548-pcie"))
|
||||
fsl_add_bridge(np, 0);
|
||||
}
|
||||
|
||||
#endif
|
||||
|
||||
mpc85xx_smp_init();
|
||||
|
||||
fsl_pci_assign_primary();
|
||||
|
||||
#ifdef CONFIG_QUICC_ENGINE
|
||||
np = of_find_compatible_node(NULL, NULL, "fsl,qe");
|
||||
if (!np) {
|
||||
@ -161,15 +155,15 @@ qe_fail:
|
||||
printk(KERN_INFO "MPC85xx RDB board from Freescale Semiconductor\n");
|
||||
}
|
||||
|
||||
machine_device_initcall(p2020_rdb, mpc85xx_common_publish_devices);
|
||||
machine_device_initcall(p2020_rdb_pc, mpc85xx_common_publish_devices);
|
||||
machine_device_initcall(p1020_mbg_pc, mpc85xx_common_publish_devices);
|
||||
machine_device_initcall(p1020_rdb, mpc85xx_common_publish_devices);
|
||||
machine_device_initcall(p1020_rdb_pc, mpc85xx_common_publish_devices);
|
||||
machine_device_initcall(p1020_utm_pc, mpc85xx_common_publish_devices);
|
||||
machine_device_initcall(p1021_rdb_pc, mpc85xx_common_publish_devices);
|
||||
machine_device_initcall(p1025_rdb, mpc85xx_common_publish_devices);
|
||||
machine_device_initcall(p1024_rdb, mpc85xx_common_publish_devices);
|
||||
machine_arch_initcall(p2020_rdb, mpc85xx_common_publish_devices);
|
||||
machine_arch_initcall(p2020_rdb_pc, mpc85xx_common_publish_devices);
|
||||
machine_arch_initcall(p1020_mbg_pc, mpc85xx_common_publish_devices);
|
||||
machine_arch_initcall(p1020_rdb, mpc85xx_common_publish_devices);
|
||||
machine_arch_initcall(p1020_rdb_pc, mpc85xx_common_publish_devices);
|
||||
machine_arch_initcall(p1020_utm_pc, mpc85xx_common_publish_devices);
|
||||
machine_arch_initcall(p1021_rdb_pc, mpc85xx_common_publish_devices);
|
||||
machine_arch_initcall(p1025_rdb, mpc85xx_common_publish_devices);
|
||||
machine_arch_initcall(p1024_rdb, mpc85xx_common_publish_devices);
|
||||
|
||||
/*
|
||||
* Called very early, device-tree isn't unflattened
|
||||
|
||||
@ -46,25 +46,15 @@ void __init p1010_rdb_pic_init(void)
|
||||
*/
|
||||
static void __init p1010_rdb_setup_arch(void)
|
||||
{
|
||||
#ifdef CONFIG_PCI
|
||||
struct device_node *np;
|
||||
#endif
|
||||
|
||||
if (ppc_md.progress)
|
||||
ppc_md.progress("p1010_rdb_setup_arch()", 0);
|
||||
|
||||
#ifdef CONFIG_PCI
|
||||
for_each_node_by_type(np, "pci") {
|
||||
if (of_device_is_compatible(np, "fsl,p1010-pcie"))
|
||||
fsl_add_bridge(np, 0);
|
||||
}
|
||||
|
||||
#endif
|
||||
fsl_pci_assign_primary();
|
||||
|
||||
printk(KERN_INFO "P1010 RDB board from Freescale Semiconductor\n");
|
||||
}
|
||||
|
||||
machine_device_initcall(p1010_rdb, mpc85xx_common_publish_devices);
|
||||
machine_arch_initcall(p1010_rdb, mpc85xx_common_publish_devices);
|
||||
machine_arch_initcall(p1010_rdb, swiotlb_setup_bus_notifier);
|
||||
|
||||
/*
|
||||
|
||||
@ -18,7 +18,6 @@
|
||||
|
||||
#include <linux/pci.h>
|
||||
#include <linux/of_platform.h>
|
||||
#include <linux/memblock.h>
|
||||
#include <asm/div64.h>
|
||||
#include <asm/mpic.h>
|
||||
#include <asm/swiotlb.h>
|
||||
@ -507,32 +506,9 @@ early_param("video", early_video_setup);
|
||||
*/
|
||||
static void __init p1022_ds_setup_arch(void)
|
||||
{
|
||||
#ifdef CONFIG_PCI
|
||||
struct device_node *np;
|
||||
#endif
|
||||
dma_addr_t max = 0xffffffff;
|
||||
|
||||
if (ppc_md.progress)
|
||||
ppc_md.progress("p1022_ds_setup_arch()", 0);
|
||||
|
||||
#ifdef CONFIG_PCI
|
||||
for_each_compatible_node(np, "pci", "fsl,p1022-pcie") {
|
||||
struct resource rsrc;
|
||||
struct pci_controller *hose;
|
||||
|
||||
of_address_to_resource(np, 0, &rsrc);
|
||||
|
||||
if ((rsrc.start & 0xfffff) == 0x8000)
|
||||
fsl_add_bridge(np, 1);
|
||||
else
|
||||
fsl_add_bridge(np, 0);
|
||||
|
||||
hose = pci_find_hose_for_OF_device(np);
|
||||
max = min(max, hose->dma_window_base_cur +
|
||||
hose->dma_window_size);
|
||||
}
|
||||
#endif
|
||||
|
||||
#if defined(CONFIG_FB_FSL_DIU) || defined(CONFIG_FB_FSL_DIU_MODULE)
|
||||
diu_ops.get_pixel_format = p1022ds_get_pixel_format;
|
||||
diu_ops.set_gamma_table = p1022ds_set_gamma_table;
|
||||
@ -601,18 +577,14 @@ static void __init p1022_ds_setup_arch(void)
|
||||
|
||||
mpc85xx_smp_init();
|
||||
|
||||
#ifdef CONFIG_SWIOTLB
|
||||
if ((memblock_end_of_DRAM() - 1) > max) {
|
||||
ppc_swiotlb_enable = 1;
|
||||
set_pci_dma_ops(&swiotlb_dma_ops);
|
||||
ppc_md.pci_dma_dev_setup = pci_dma_dev_setup_swiotlb;
|
||||
}
|
||||
#endif
|
||||
fsl_pci_assign_primary();
|
||||
|
||||
swiotlb_detect_4g();
|
||||
|
||||
pr_info("Freescale P1022 DS reference board\n");
|
||||
}
|
||||
|
||||
machine_device_initcall(p1022_ds, mpc85xx_common_publish_devices);
|
||||
machine_arch_initcall(p1022_ds, mpc85xx_common_publish_devices);
|
||||
|
||||
machine_arch_initcall(p1022_ds, swiotlb_setup_bus_notifier);
|
||||
|
||||
|
||||
167
arch/powerpc/platforms/85xx/p1022_rdk.c
Normal file
167
arch/powerpc/platforms/85xx/p1022_rdk.c
Normal file
@ -0,0 +1,167 @@
|
||||
/*
|
||||
* P1022 RDK board specific routines
|
||||
*
|
||||
* Copyright 2012 Freescale Semiconductor, Inc.
|
||||
*
|
||||
* Author: Timur Tabi <timur@freescale.com>
|
||||
*
|
||||
* Based on p1022_ds.c
|
||||
*
|
||||
* This file is licensed under the terms of the GNU General Public License
|
||||
* version 2. This program is licensed "as is" without any warranty of any
|
||||
* kind, whether express or implied.
|
||||
*/
|
||||
|
||||
#include <linux/pci.h>
|
||||
#include <linux/of_platform.h>
|
||||
#include <asm/div64.h>
|
||||
#include <asm/mpic.h>
|
||||
#include <asm/swiotlb.h>
|
||||
|
||||
#include <sysdev/fsl_soc.h>
|
||||
#include <sysdev/fsl_pci.h>
|
||||
#include <asm/udbg.h>
|
||||
#include <asm/fsl_guts.h>
|
||||
#include "smp.h"
|
||||
|
||||
#include "mpc85xx.h"
|
||||
|
||||
#if defined(CONFIG_FB_FSL_DIU) || defined(CONFIG_FB_FSL_DIU_MODULE)
|
||||
|
||||
/* DIU Pixel Clock bits of the CLKDVDR Global Utilities register */
|
||||
#define CLKDVDR_PXCKEN 0x80000000
|
||||
#define CLKDVDR_PXCKINV 0x10000000
|
||||
#define CLKDVDR_PXCKDLY 0x06000000
|
||||
#define CLKDVDR_PXCLK_MASK 0x00FF0000
|
||||
|
||||
/**
|
||||
* p1022rdk_set_monitor_port: switch the output to a different monitor port
|
||||
*/
|
||||
static void p1022rdk_set_monitor_port(enum fsl_diu_monitor_port port)
|
||||
{
|
||||
if (port != FSL_DIU_PORT_DVI) {
|
||||
pr_err("p1022rdk: unsupported monitor port %i\n", port);
|
||||
return;
|
||||
}
|
||||
}
|
||||
|
||||
/**
|
||||
* p1022rdk_set_pixel_clock: program the DIU's clock
|
||||
*
|
||||
* @pixclock: the wavelength, in picoseconds, of the clock
|
||||
*/
|
||||
void p1022rdk_set_pixel_clock(unsigned int pixclock)
|
||||
{
|
||||
struct device_node *guts_np = NULL;
|
||||
struct ccsr_guts __iomem *guts;
|
||||
unsigned long freq;
|
||||
u64 temp;
|
||||
u32 pxclk;
|
||||
|
||||
/* Map the global utilities registers. */
|
||||
guts_np = of_find_compatible_node(NULL, NULL, "fsl,p1022-guts");
|
||||
if (!guts_np) {
|
||||
pr_err("p1022rdk: missing global utilties device node\n");
|
||||
return;
|
||||
}
|
||||
|
||||
guts = of_iomap(guts_np, 0);
|
||||
of_node_put(guts_np);
|
||||
if (!guts) {
|
||||
pr_err("p1022rdk: could not map global utilties device\n");
|
||||
return;
|
||||
}
|
||||
|
||||
/* Convert pixclock from a wavelength to a frequency */
|
||||
temp = 1000000000000ULL;
|
||||
do_div(temp, pixclock);
|
||||
freq = temp;
|
||||
|
||||
/*
|
||||
* 'pxclk' is the ratio of the platform clock to the pixel clock.
|
||||
* This number is programmed into the CLKDVDR register, and the valid
|
||||
* range of values is 2-255.
|
||||
*/
|
||||
pxclk = DIV_ROUND_CLOSEST(fsl_get_sys_freq(), freq);
|
||||
pxclk = clamp_t(u32, pxclk, 2, 255);
|
||||
|
||||
/* Disable the pixel clock, and set it to non-inverted and no delay */
|
||||
clrbits32(&guts->clkdvdr,
|
||||
CLKDVDR_PXCKEN | CLKDVDR_PXCKDLY | CLKDVDR_PXCLK_MASK);
|
||||
|
||||
/* Enable the clock and set the pxclk */
|
||||
setbits32(&guts->clkdvdr, CLKDVDR_PXCKEN | (pxclk << 16));
|
||||
|
||||
iounmap(guts);
|
||||
}
|
||||
|
||||
/**
|
||||
* p1022rdk_valid_monitor_port: set the monitor port for sysfs
|
||||
*/
|
||||
enum fsl_diu_monitor_port
|
||||
p1022rdk_valid_monitor_port(enum fsl_diu_monitor_port port)
|
||||
{
|
||||
return FSL_DIU_PORT_DVI;
|
||||
}
|
||||
|
||||
#endif
|
||||
|
||||
void __init p1022_rdk_pic_init(void)
|
||||
{
|
||||
struct mpic *mpic = mpic_alloc(NULL, 0, MPIC_BIG_ENDIAN |
|
||||
MPIC_SINGLE_DEST_CPU,
|
||||
0, 256, " OpenPIC ");
|
||||
BUG_ON(mpic == NULL);
|
||||
mpic_init(mpic);
|
||||
}
|
||||
|
||||
/*
|
||||
* Setup the architecture
|
||||
*/
|
||||
static void __init p1022_rdk_setup_arch(void)
|
||||
{
|
||||
if (ppc_md.progress)
|
||||
ppc_md.progress("p1022_rdk_setup_arch()", 0);
|
||||
|
||||
#if defined(CONFIG_FB_FSL_DIU) || defined(CONFIG_FB_FSL_DIU_MODULE)
|
||||
diu_ops.set_monitor_port = p1022rdk_set_monitor_port;
|
||||
diu_ops.set_pixel_clock = p1022rdk_set_pixel_clock;
|
||||
diu_ops.valid_monitor_port = p1022rdk_valid_monitor_port;
|
||||
#endif
|
||||
|
||||
mpc85xx_smp_init();
|
||||
|
||||
fsl_pci_assign_primary();
|
||||
|
||||
swiotlb_detect_4g();
|
||||
|
||||
pr_info("Freescale / iVeia P1022 RDK reference board\n");
|
||||
}
|
||||
|
||||
machine_arch_initcall(p1022_rdk, mpc85xx_common_publish_devices);
|
||||
|
||||
machine_arch_initcall(p1022_rdk, swiotlb_setup_bus_notifier);
|
||||
|
||||
/*
|
||||
* Called very early, device-tree isn't unflattened
|
||||
*/
|
||||
static int __init p1022_rdk_probe(void)
|
||||
{
|
||||
unsigned long root = of_get_flat_dt_root();
|
||||
|
||||
return of_flat_dt_is_compatible(root, "fsl,p1022rdk");
|
||||
}
|
||||
|
||||
define_machine(p1022_rdk) {
|
||||
.name = "P1022 RDK",
|
||||
.probe = p1022_rdk_probe,
|
||||
.setup_arch = p1022_rdk_setup_arch,
|
||||
.init_IRQ = p1022_rdk_pic_init,
|
||||
#ifdef CONFIG_PCI
|
||||
.pcibios_fixup_bus = fsl_pcibios_fixup_bus,
|
||||
#endif
|
||||
.get_irq = mpic_get_irq,
|
||||
.restart = fsl_rstcr_restart,
|
||||
.calibrate_decr = generic_calibrate_decr,
|
||||
.progress = udbg_progress,
|
||||
};
|
||||
@ -80,15 +80,12 @@ static void __init mpc85xx_rds_setup_arch(void)
|
||||
}
|
||||
}
|
||||
|
||||
#ifdef CONFIG_PCI
|
||||
for_each_compatible_node(np, "pci", "fsl,p1023-pcie")
|
||||
fsl_add_bridge(np, 0);
|
||||
#endif
|
||||
|
||||
mpc85xx_smp_init();
|
||||
|
||||
fsl_pci_assign_primary();
|
||||
}
|
||||
|
||||
machine_device_initcall(p1023_rds, mpc85xx_common_publish_devices);
|
||||
machine_arch_initcall(p1023_rds, mpc85xx_common_publish_devices);
|
||||
|
||||
static void __init mpc85xx_rds_pic_init(void)
|
||||
{
|
||||
|
||||
@ -80,7 +80,7 @@ define_machine(p2041_rdb) {
|
||||
.power_save = e500_idle,
|
||||
};
|
||||
|
||||
machine_device_initcall(p2041_rdb, corenet_ds_publish_devices);
|
||||
machine_arch_initcall(p2041_rdb, corenet_ds_publish_devices);
|
||||
|
||||
#ifdef CONFIG_SWIOTLB
|
||||
machine_arch_initcall(p2041_rdb, swiotlb_setup_bus_notifier);
|
||||
|
||||
@ -82,7 +82,7 @@ define_machine(p3041_ds) {
|
||||
.power_save = e500_idle,
|
||||
};
|
||||
|
||||
machine_device_initcall(p3041_ds, corenet_ds_publish_devices);
|
||||
machine_arch_initcall(p3041_ds, corenet_ds_publish_devices);
|
||||
|
||||
#ifdef CONFIG_SWIOTLB
|
||||
machine_arch_initcall(p3041_ds, swiotlb_setup_bus_notifier);
|
||||
|
||||
@ -81,7 +81,7 @@ define_machine(p4080_ds) {
|
||||
.power_save = e500_idle,
|
||||
};
|
||||
|
||||
machine_device_initcall(p4080_ds, corenet_ds_publish_devices);
|
||||
machine_arch_initcall(p4080_ds, corenet_ds_publish_devices);
|
||||
#ifdef CONFIG_SWIOTLB
|
||||
machine_arch_initcall(p4080_ds, swiotlb_setup_bus_notifier);
|
||||
#endif
|
||||
|
||||
@ -91,7 +91,7 @@ define_machine(p5020_ds) {
|
||||
#endif
|
||||
};
|
||||
|
||||
machine_device_initcall(p5020_ds, corenet_ds_publish_devices);
|
||||
machine_arch_initcall(p5020_ds, corenet_ds_publish_devices);
|
||||
|
||||
#ifdef CONFIG_SWIOTLB
|
||||
machine_arch_initcall(p5020_ds, swiotlb_setup_bus_notifier);
|
||||
|
||||
89
arch/powerpc/platforms/85xx/p5040_ds.c
Normal file
89
arch/powerpc/platforms/85xx/p5040_ds.c
Normal file
@ -0,0 +1,89 @@
|
||||
/*
|
||||
* P5040 DS Setup
|
||||
*
|
||||
* Copyright 2009-2010 Freescale Semiconductor Inc.
|
||||
*
|
||||
* This program is free software; you can redistribute it and/or modify it
|
||||
* under the terms of the GNU General Public License as published by the
|
||||
* Free Software Foundation; either version 2 of the License, or (at your
|
||||
* option) any later version.
|
||||
*/
|
||||
|
||||
#include <linux/kernel.h>
|
||||
#include <linux/pci.h>
|
||||
|
||||
#include <asm/machdep.h>
|
||||
#include <asm/udbg.h>
|
||||
#include <asm/mpic.h>
|
||||
|
||||
#include <linux/of_fdt.h>
|
||||
|
||||
#include <sysdev/fsl_soc.h>
|
||||
#include <sysdev/fsl_pci.h>
|
||||
#include <asm/ehv_pic.h>
|
||||
|
||||
#include "corenet_ds.h"
|
||||
|
||||
/*
|
||||
* Called very early, device-tree isn't unflattened
|
||||
*/
|
||||
static int __init p5040_ds_probe(void)
|
||||
{
|
||||
unsigned long root = of_get_flat_dt_root();
|
||||
#ifdef CONFIG_SMP
|
||||
extern struct smp_ops_t smp_85xx_ops;
|
||||
#endif
|
||||
|
||||
if (of_flat_dt_is_compatible(root, "fsl,P5040DS"))
|
||||
return 1;
|
||||
|
||||
/* Check if we're running under the Freescale hypervisor */
|
||||
if (of_flat_dt_is_compatible(root, "fsl,P5040DS-hv")) {
|
||||
ppc_md.init_IRQ = ehv_pic_init;
|
||||
ppc_md.get_irq = ehv_pic_get_irq;
|
||||
ppc_md.restart = fsl_hv_restart;
|
||||
ppc_md.power_off = fsl_hv_halt;
|
||||
ppc_md.halt = fsl_hv_halt;
|
||||
#ifdef CONFIG_SMP
|
||||
/*
|
||||
* Disable the timebase sync operations because we can't write
|
||||
* to the timebase registers under the hypervisor.
|
||||
*/
|
||||
smp_85xx_ops.give_timebase = NULL;
|
||||
smp_85xx_ops.take_timebase = NULL;
|
||||
#endif
|
||||
return 1;
|
||||
}
|
||||
|
||||
return 0;
|
||||
}
|
||||
|
||||
define_machine(p5040_ds) {
|
||||
.name = "P5040 DS",
|
||||
.probe = p5040_ds_probe,
|
||||
.setup_arch = corenet_ds_setup_arch,
|
||||
.init_IRQ = corenet_ds_pic_init,
|
||||
#ifdef CONFIG_PCI
|
||||
.pcibios_fixup_bus = fsl_pcibios_fixup_bus,
|
||||
#endif
|
||||
/* coreint doesn't play nice with lazy EE, use legacy mpic for now */
|
||||
#ifdef CONFIG_PPC64
|
||||
.get_irq = mpic_get_irq,
|
||||
#else
|
||||
.get_irq = mpic_get_coreint_irq,
|
||||
#endif
|
||||
.restart = fsl_rstcr_restart,
|
||||
.calibrate_decr = generic_calibrate_decr,
|
||||
.progress = udbg_progress,
|
||||
#ifdef CONFIG_PPC64
|
||||
.power_save = book3e_idle,
|
||||
#else
|
||||
.power_save = e500_idle,
|
||||
#endif
|
||||
};
|
||||
|
||||
machine_arch_initcall(p5040_ds, corenet_ds_publish_devices);
|
||||
|
||||
#ifdef CONFIG_SWIOTLB
|
||||
machine_arch_initcall(p5040_ds, swiotlb_setup_bus_notifier);
|
||||
#endif
|
||||
@ -41,7 +41,8 @@ static void __init qemu_e500_setup_arch(void)
|
||||
{
|
||||
ppc_md.progress("qemu_e500_setup_arch()", 0);
|
||||
|
||||
fsl_pci_init();
|
||||
fsl_pci_assign_primary();
|
||||
swiotlb_detect_4g();
|
||||
mpc85xx_smp_init();
|
||||
}
|
||||
|
||||
@ -55,7 +56,7 @@ static int __init qemu_e500_probe(void)
|
||||
return !!of_flat_dt_is_compatible(root, "fsl,qemu-e500");
|
||||
}
|
||||
|
||||
machine_device_initcall(qemu_e500, mpc85xx_common_publish_devices);
|
||||
machine_arch_initcall(qemu_e500, mpc85xx_common_publish_devices);
|
||||
|
||||
define_machine(qemu_e500) {
|
||||
.name = "QEMU e500",
|
||||
|
||||
@ -88,26 +88,11 @@ static int __init sbc8548_hw_rev(void)
|
||||
*/
|
||||
static void __init sbc8548_setup_arch(void)
|
||||
{
|
||||
#ifdef CONFIG_PCI
|
||||
struct device_node *np;
|
||||
#endif
|
||||
|
||||
if (ppc_md.progress)
|
||||
ppc_md.progress("sbc8548_setup_arch()", 0);
|
||||
|
||||
#ifdef CONFIG_PCI
|
||||
for_each_node_by_type(np, "pci") {
|
||||
if (of_device_is_compatible(np, "fsl,mpc8540-pci") ||
|
||||
of_device_is_compatible(np, "fsl,mpc8548-pcie")) {
|
||||
struct resource rsrc;
|
||||
of_address_to_resource(np, 0, &rsrc);
|
||||
if ((rsrc.start & 0xfffff) == 0x8000)
|
||||
fsl_add_bridge(np, 1);
|
||||
else
|
||||
fsl_add_bridge(np, 0);
|
||||
}
|
||||
}
|
||||
#endif
|
||||
fsl_pci_assign_primary();
|
||||
|
||||
sbc_rev = sbc8548_hw_rev();
|
||||
}
|
||||
|
||||
@ -128,7 +113,7 @@ static void sbc8548_show_cpuinfo(struct seq_file *m)
|
||||
seq_printf(m, "PLL setting\t: 0x%x\n", ((phid1 >> 24) & 0x3f));
|
||||
}
|
||||
|
||||
machine_device_initcall(sbc8548, mpc85xx_common_publish_devices);
|
||||
machine_arch_initcall(sbc8548, mpc85xx_common_publish_devices);
|
||||
|
||||
/*
|
||||
* Called very early, device-tree isn't unflattened
|
||||
|
||||
@ -2,7 +2,7 @@
|
||||
* Author: Andy Fleming <afleming@freescale.com>
|
||||
* Kumar Gala <galak@kernel.crashing.org>
|
||||
*
|
||||
* Copyright 2006-2008, 2011 Freescale Semiconductor Inc.
|
||||
* Copyright 2006-2008, 2011-2012 Freescale Semiconductor Inc.
|
||||
*
|
||||
* This program is free software; you can redistribute it and/or modify it
|
||||
* under the terms of the GNU General Public License as published by the
|
||||
@ -17,6 +17,7 @@
|
||||
#include <linux/of.h>
|
||||
#include <linux/kexec.h>
|
||||
#include <linux/highmem.h>
|
||||
#include <linux/cpu.h>
|
||||
|
||||
#include <asm/machdep.h>
|
||||
#include <asm/pgtable.h>
|
||||
@ -24,33 +25,118 @@
|
||||
#include <asm/mpic.h>
|
||||
#include <asm/cacheflush.h>
|
||||
#include <asm/dbell.h>
|
||||
#include <asm/fsl_guts.h>
|
||||
|
||||
#include <sysdev/fsl_soc.h>
|
||||
#include <sysdev/mpic.h>
|
||||
#include "smp.h"
|
||||
|
||||
extern void __early_start(void);
|
||||
struct epapr_spin_table {
|
||||
u32 addr_h;
|
||||
u32 addr_l;
|
||||
u32 r3_h;
|
||||
u32 r3_l;
|
||||
u32 reserved;
|
||||
u32 pir;
|
||||
};
|
||||
|
||||
#define BOOT_ENTRY_ADDR_UPPER 0
|
||||
#define BOOT_ENTRY_ADDR_LOWER 1
|
||||
#define BOOT_ENTRY_R3_UPPER 2
|
||||
#define BOOT_ENTRY_R3_LOWER 3
|
||||
#define BOOT_ENTRY_RESV 4
|
||||
#define BOOT_ENTRY_PIR 5
|
||||
#define BOOT_ENTRY_R6_UPPER 6
|
||||
#define BOOT_ENTRY_R6_LOWER 7
|
||||
#define NUM_BOOT_ENTRY 8
|
||||
#define SIZE_BOOT_ENTRY (NUM_BOOT_ENTRY * sizeof(u32))
|
||||
static struct ccsr_guts __iomem *guts;
|
||||
static u64 timebase;
|
||||
static int tb_req;
|
||||
static int tb_valid;
|
||||
|
||||
static int __init
|
||||
smp_85xx_kick_cpu(int nr)
|
||||
static void mpc85xx_timebase_freeze(int freeze)
|
||||
{
|
||||
uint32_t mask;
|
||||
|
||||
mask = CCSR_GUTS_DEVDISR_TB0 | CCSR_GUTS_DEVDISR_TB1;
|
||||
if (freeze)
|
||||
setbits32(&guts->devdisr, mask);
|
||||
else
|
||||
clrbits32(&guts->devdisr, mask);
|
||||
|
||||
in_be32(&guts->devdisr);
|
||||
}
|
||||
|
||||
static void mpc85xx_give_timebase(void)
|
||||
{
|
||||
unsigned long flags;
|
||||
|
||||
local_irq_save(flags);
|
||||
|
||||
while (!tb_req)
|
||||
barrier();
|
||||
tb_req = 0;
|
||||
|
||||
mpc85xx_timebase_freeze(1);
|
||||
timebase = get_tb();
|
||||
mb();
|
||||
tb_valid = 1;
|
||||
|
||||
while (tb_valid)
|
||||
barrier();
|
||||
|
||||
mpc85xx_timebase_freeze(0);
|
||||
|
||||
local_irq_restore(flags);
|
||||
}
|
||||
|
||||
static void mpc85xx_take_timebase(void)
|
||||
{
|
||||
unsigned long flags;
|
||||
|
||||
local_irq_save(flags);
|
||||
|
||||
tb_req = 1;
|
||||
while (!tb_valid)
|
||||
barrier();
|
||||
|
||||
set_tb(timebase >> 32, timebase & 0xffffffff);
|
||||
isync();
|
||||
tb_valid = 0;
|
||||
|
||||
local_irq_restore(flags);
|
||||
}
|
||||
|
||||
#ifdef CONFIG_HOTPLUG_CPU
|
||||
static void __cpuinit smp_85xx_mach_cpu_die(void)
|
||||
{
|
||||
unsigned int cpu = smp_processor_id();
|
||||
u32 tmp;
|
||||
|
||||
local_irq_disable();
|
||||
idle_task_exit();
|
||||
generic_set_cpu_dead(cpu);
|
||||
mb();
|
||||
|
||||
mtspr(SPRN_TCR, 0);
|
||||
|
||||
__flush_disable_L1();
|
||||
tmp = (mfspr(SPRN_HID0) & ~(HID0_DOZE|HID0_SLEEP)) | HID0_NAP;
|
||||
mtspr(SPRN_HID0, tmp);
|
||||
isync();
|
||||
|
||||
/* Enter NAP mode. */
|
||||
tmp = mfmsr();
|
||||
tmp |= MSR_WE;
|
||||
mb();
|
||||
mtmsr(tmp);
|
||||
isync();
|
||||
|
||||
while (1)
|
||||
;
|
||||
}
|
||||
#endif
|
||||
|
||||
static int __cpuinit smp_85xx_kick_cpu(int nr)
|
||||
{
|
||||
unsigned long flags;
|
||||
const u64 *cpu_rel_addr;
|
||||
__iomem u32 *bptr_vaddr;
|
||||
__iomem struct epapr_spin_table *spin_table;
|
||||
struct device_node *np;
|
||||
int n = 0, hw_cpu = get_hard_smp_processor_id(nr);
|
||||
int hw_cpu = get_hard_smp_processor_id(nr);
|
||||
int ioremappable;
|
||||
int ret = 0;
|
||||
|
||||
WARN_ON(nr < 0 || nr >= NR_CPUS);
|
||||
WARN_ON(hw_cpu < 0 || hw_cpu >= NR_CPUS);
|
||||
@ -75,46 +161,81 @@ smp_85xx_kick_cpu(int nr)
|
||||
|
||||
/* Map the spin table */
|
||||
if (ioremappable)
|
||||
bptr_vaddr = ioremap(*cpu_rel_addr, SIZE_BOOT_ENTRY);
|
||||
spin_table = ioremap(*cpu_rel_addr,
|
||||
sizeof(struct epapr_spin_table));
|
||||
else
|
||||
bptr_vaddr = phys_to_virt(*cpu_rel_addr);
|
||||
spin_table = phys_to_virt(*cpu_rel_addr);
|
||||
|
||||
local_irq_save(flags);
|
||||
|
||||
out_be32(bptr_vaddr + BOOT_ENTRY_PIR, hw_cpu);
|
||||
#ifdef CONFIG_PPC32
|
||||
out_be32(bptr_vaddr + BOOT_ENTRY_ADDR_LOWER, __pa(__early_start));
|
||||
#ifdef CONFIG_HOTPLUG_CPU
|
||||
/* Corresponding to generic_set_cpu_dead() */
|
||||
generic_set_cpu_up(nr);
|
||||
|
||||
if (system_state == SYSTEM_RUNNING) {
|
||||
out_be32(&spin_table->addr_l, 0);
|
||||
|
||||
/*
|
||||
* We don't set the BPTR register here since it already points
|
||||
* to the boot page properly.
|
||||
*/
|
||||
mpic_reset_core(hw_cpu);
|
||||
|
||||
/* wait until core is ready... */
|
||||
if (!spin_event_timeout(in_be32(&spin_table->addr_l) == 1,
|
||||
10000, 100)) {
|
||||
pr_err("%s: timeout waiting for core %d to reset\n",
|
||||
__func__, hw_cpu);
|
||||
ret = -ENOENT;
|
||||
goto out;
|
||||
}
|
||||
|
||||
/* clear the acknowledge status */
|
||||
__secondary_hold_acknowledge = -1;
|
||||
}
|
||||
#endif
|
||||
out_be32(&spin_table->pir, hw_cpu);
|
||||
out_be32(&spin_table->addr_l, __pa(__early_start));
|
||||
|
||||
if (!ioremappable)
|
||||
flush_dcache_range((ulong)bptr_vaddr,
|
||||
(ulong)(bptr_vaddr + SIZE_BOOT_ENTRY));
|
||||
flush_dcache_range((ulong)spin_table,
|
||||
(ulong)spin_table + sizeof(struct epapr_spin_table));
|
||||
|
||||
/* Wait a bit for the CPU to ack. */
|
||||
while ((__secondary_hold_acknowledge != hw_cpu) && (++n < 1000))
|
||||
mdelay(1);
|
||||
if (!spin_event_timeout(__secondary_hold_acknowledge == hw_cpu,
|
||||
10000, 100)) {
|
||||
pr_err("%s: timeout waiting for core %d to ack\n",
|
||||
__func__, hw_cpu);
|
||||
ret = -ENOENT;
|
||||
goto out;
|
||||
}
|
||||
out:
|
||||
#else
|
||||
smp_generic_kick_cpu(nr);
|
||||
|
||||
out_be64((u64 *)(bptr_vaddr + BOOT_ENTRY_ADDR_UPPER),
|
||||
__pa((u64)*((unsigned long long *) generic_secondary_smp_init)));
|
||||
out_be32(&spin_table->pir, hw_cpu);
|
||||
out_be64((u64 *)(&spin_table->addr_h),
|
||||
__pa((u64)*((unsigned long long *)generic_secondary_smp_init)));
|
||||
|
||||
if (!ioremappable)
|
||||
flush_dcache_range((ulong)bptr_vaddr,
|
||||
(ulong)(bptr_vaddr + SIZE_BOOT_ENTRY));
|
||||
flush_dcache_range((ulong)spin_table,
|
||||
(ulong)spin_table + sizeof(struct epapr_spin_table));
|
||||
#endif
|
||||
|
||||
local_irq_restore(flags);
|
||||
|
||||
if (ioremappable)
|
||||
iounmap(bptr_vaddr);
|
||||
iounmap(spin_table);
|
||||
|
||||
pr_debug("waited %d msecs for CPU #%d.\n", n, nr);
|
||||
|
||||
return 0;
|
||||
return ret;
|
||||
}
|
||||
|
||||
struct smp_ops_t smp_85xx_ops = {
|
||||
.kick_cpu = smp_85xx_kick_cpu,
|
||||
#ifdef CONFIG_HOTPLUG_CPU
|
||||
.cpu_disable = generic_cpu_disable,
|
||||
.cpu_die = generic_cpu_die,
|
||||
#endif
|
||||
#ifdef CONFIG_KEXEC
|
||||
.give_timebase = smp_generic_give_timebase,
|
||||
.take_timebase = smp_generic_take_timebase,
|
||||
@ -218,8 +339,7 @@ static void mpc85xx_smp_machine_kexec(struct kimage *image)
|
||||
}
|
||||
#endif /* CONFIG_KEXEC */
|
||||
|
||||
static void __init
|
||||
smp_85xx_setup_cpu(int cpu_nr)
|
||||
static void __cpuinit smp_85xx_setup_cpu(int cpu_nr)
|
||||
{
|
||||
if (smp_85xx_ops.probe == smp_mpic_probe)
|
||||
mpic_setup_this_cpu();
|
||||
@ -228,6 +348,16 @@ smp_85xx_setup_cpu(int cpu_nr)
|
||||
doorbell_setup_this_cpu();
|
||||
}
|
||||
|
||||
static const struct of_device_id mpc85xx_smp_guts_ids[] = {
|
||||
{ .compatible = "fsl,mpc8572-guts", },
|
||||
{ .compatible = "fsl,p1020-guts", },
|
||||
{ .compatible = "fsl,p1021-guts", },
|
||||
{ .compatible = "fsl,p1022-guts", },
|
||||
{ .compatible = "fsl,p1023-guts", },
|
||||
{ .compatible = "fsl,p2020-guts", },
|
||||
{},
|
||||
};
|
||||
|
||||
void __init mpc85xx_smp_init(void)
|
||||
{
|
||||
struct device_node *np;
|
||||
@ -249,6 +379,22 @@ void __init mpc85xx_smp_init(void)
|
||||
smp_85xx_ops.cause_ipi = doorbell_cause_ipi;
|
||||
}
|
||||
|
||||
np = of_find_matching_node(NULL, mpc85xx_smp_guts_ids);
|
||||
if (np) {
|
||||
guts = of_iomap(np, 0);
|
||||
of_node_put(np);
|
||||
if (!guts) {
|
||||
pr_err("%s: Could not map guts node address\n",
|
||||
__func__);
|
||||
return;
|
||||
}
|
||||
smp_85xx_ops.give_timebase = mpc85xx_give_timebase;
|
||||
smp_85xx_ops.take_timebase = mpc85xx_take_timebase;
|
||||
#ifdef CONFIG_HOTPLUG_CPU
|
||||
ppc_md.cpu_die = smp_85xx_mach_cpu_die;
|
||||
#endif
|
||||
}
|
||||
|
||||
smp_ops = &smp_85xx_ops;
|
||||
|
||||
#ifdef CONFIG_KEXEC
|
||||
|
||||
@ -66,20 +66,13 @@ static void __init socrates_pic_init(void)
|
||||
*/
|
||||
static void __init socrates_setup_arch(void)
|
||||
{
|
||||
#ifdef CONFIG_PCI
|
||||
struct device_node *np;
|
||||
#endif
|
||||
|
||||
if (ppc_md.progress)
|
||||
ppc_md.progress("socrates_setup_arch()", 0);
|
||||
|
||||
#ifdef CONFIG_PCI
|
||||
for_each_compatible_node(np, "pci", "fsl,mpc8540-pci")
|
||||
fsl_add_bridge(np, 1);
|
||||
#endif
|
||||
fsl_pci_assign_primary();
|
||||
}
|
||||
|
||||
machine_device_initcall(socrates, mpc85xx_common_publish_devices);
|
||||
machine_arch_initcall(socrates, mpc85xx_common_publish_devices);
|
||||
|
||||
/*
|
||||
* Called very early, device-tree isn't unflattened
|
||||
|
||||
@ -60,21 +60,14 @@ static void __init stx_gp3_pic_init(void)
|
||||
*/
|
||||
static void __init stx_gp3_setup_arch(void)
|
||||
{
|
||||
#ifdef CONFIG_PCI
|
||||
struct device_node *np;
|
||||
#endif
|
||||
|
||||
if (ppc_md.progress)
|
||||
ppc_md.progress("stx_gp3_setup_arch()", 0);
|
||||
|
||||
fsl_pci_assign_primary();
|
||||
|
||||
#ifdef CONFIG_CPM2
|
||||
cpm2_reset();
|
||||
#endif
|
||||
|
||||
#ifdef CONFIG_PCI
|
||||
for_each_compatible_node(np, "pci", "fsl,mpc8540-pci")
|
||||
fsl_add_bridge(np, 1);
|
||||
#endif
|
||||
}
|
||||
|
||||
static void stx_gp3_show_cpuinfo(struct seq_file *m)
|
||||
@ -93,7 +86,7 @@ static void stx_gp3_show_cpuinfo(struct seq_file *m)
|
||||
seq_printf(m, "PLL setting\t: 0x%x\n", ((phid1 >> 24) & 0x3f));
|
||||
}
|
||||
|
||||
machine_device_initcall(stx_gp3, mpc85xx_common_publish_devices);
|
||||
machine_arch_initcall(stx_gp3, mpc85xx_common_publish_devices);
|
||||
|
||||
/*
|
||||
* Called very early, device-tree isn't unflattened
|
||||
|
||||
@ -59,10 +59,6 @@ static void __init tqm85xx_pic_init(void)
|
||||
*/
|
||||
static void __init tqm85xx_setup_arch(void)
|
||||
{
|
||||
#ifdef CONFIG_PCI
|
||||
struct device_node *np;
|
||||
#endif
|
||||
|
||||
if (ppc_md.progress)
|
||||
ppc_md.progress("tqm85xx_setup_arch()", 0);
|
||||
|
||||
@ -70,20 +66,7 @@ static void __init tqm85xx_setup_arch(void)
|
||||
cpm2_reset();
|
||||
#endif
|
||||
|
||||
#ifdef CONFIG_PCI
|
||||
for_each_node_by_type(np, "pci") {
|
||||
if (of_device_is_compatible(np, "fsl,mpc8540-pci") ||
|
||||
of_device_is_compatible(np, "fsl,mpc8548-pcie")) {
|
||||
struct resource rsrc;
|
||||
if (!of_address_to_resource(np, 0, &rsrc)) {
|
||||
if ((rsrc.start & 0xfffff) == 0x8000)
|
||||
fsl_add_bridge(np, 1);
|
||||
else
|
||||
fsl_add_bridge(np, 0);
|
||||
}
|
||||
}
|
||||
}
|
||||
#endif
|
||||
fsl_pci_assign_primary();
|
||||
}
|
||||
|
||||
static void tqm85xx_show_cpuinfo(struct seq_file *m)
|
||||
@ -123,7 +106,7 @@ static void __devinit tqm85xx_ti1520_fixup(struct pci_dev *pdev)
|
||||
DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_TI, PCI_DEVICE_ID_TI_1520,
|
||||
tqm85xx_ti1520_fixup);
|
||||
|
||||
machine_device_initcall(tqm85xx, mpc85xx_common_publish_devices);
|
||||
machine_arch_initcall(tqm85xx, mpc85xx_common_publish_devices);
|
||||
|
||||
static const char *board[] __initdata = {
|
||||
"tqc,tqm8540",
|
||||
|
||||
@ -111,18 +111,11 @@ static void xes_mpc85xx_fixups(void)
|
||||
}
|
||||
}
|
||||
|
||||
#ifdef CONFIG_PCI
|
||||
static int primary_phb_addr;
|
||||
#endif
|
||||
|
||||
/*
|
||||
* Setup the architecture
|
||||
*/
|
||||
static void __init xes_mpc85xx_setup_arch(void)
|
||||
{
|
||||
#ifdef CONFIG_PCI
|
||||
struct device_node *np;
|
||||
#endif
|
||||
struct device_node *root;
|
||||
const char *model = "Unknown";
|
||||
|
||||
@ -137,26 +130,14 @@ static void __init xes_mpc85xx_setup_arch(void)
|
||||
|
||||
xes_mpc85xx_fixups();
|
||||
|
||||
#ifdef CONFIG_PCI
|
||||
for_each_node_by_type(np, "pci") {
|
||||
if (of_device_is_compatible(np, "fsl,mpc8540-pci") ||
|
||||
of_device_is_compatible(np, "fsl,mpc8548-pcie")) {
|
||||
struct resource rsrc;
|
||||
of_address_to_resource(np, 0, &rsrc);
|
||||
if ((rsrc.start & 0xfffff) == primary_phb_addr)
|
||||
fsl_add_bridge(np, 1);
|
||||
else
|
||||
fsl_add_bridge(np, 0);
|
||||
}
|
||||
}
|
||||
#endif
|
||||
|
||||
mpc85xx_smp_init();
|
||||
|
||||
fsl_pci_assign_primary();
|
||||
}
|
||||
|
||||
machine_device_initcall(xes_mpc8572, mpc85xx_common_publish_devices);
|
||||
machine_device_initcall(xes_mpc8548, mpc85xx_common_publish_devices);
|
||||
machine_device_initcall(xes_mpc8540, mpc85xx_common_publish_devices);
|
||||
machine_arch_initcall(xes_mpc8572, mpc85xx_common_publish_devices);
|
||||
machine_arch_initcall(xes_mpc8548, mpc85xx_common_publish_devices);
|
||||
machine_arch_initcall(xes_mpc8540, mpc85xx_common_publish_devices);
|
||||
|
||||
/*
|
||||
* Called very early, device-tree isn't unflattened
|
||||
@ -165,42 +146,21 @@ static int __init xes_mpc8572_probe(void)
|
||||
{
|
||||
unsigned long root = of_get_flat_dt_root();
|
||||
|
||||
if (of_flat_dt_is_compatible(root, "xes,MPC8572")) {
|
||||
#ifdef CONFIG_PCI
|
||||
primary_phb_addr = 0x8000;
|
||||
#endif
|
||||
return 1;
|
||||
} else {
|
||||
return 0;
|
||||
}
|
||||
return of_flat_dt_is_compatible(root, "xes,MPC8572");
|
||||
}
|
||||
|
||||
static int __init xes_mpc8548_probe(void)
|
||||
{
|
||||
unsigned long root = of_get_flat_dt_root();
|
||||
|
||||
if (of_flat_dt_is_compatible(root, "xes,MPC8548")) {
|
||||
#ifdef CONFIG_PCI
|
||||
primary_phb_addr = 0xb000;
|
||||
#endif
|
||||
return 1;
|
||||
} else {
|
||||
return 0;
|
||||
}
|
||||
return of_flat_dt_is_compatible(root, "xes,MPC8548");
|
||||
}
|
||||
|
||||
static int __init xes_mpc8540_probe(void)
|
||||
{
|
||||
unsigned long root = of_get_flat_dt_root();
|
||||
|
||||
if (of_flat_dt_is_compatible(root, "xes,MPC8540")) {
|
||||
#ifdef CONFIG_PCI
|
||||
primary_phb_addr = 0xb000;
|
||||
#endif
|
||||
return 1;
|
||||
} else {
|
||||
return 0;
|
||||
}
|
||||
return of_flat_dt_is_compatible(root, "xes,MPC8540");
|
||||
}
|
||||
|
||||
define_machine(xes_mpc8572) {
|
||||
|
||||
@ -73,13 +73,6 @@ static void __init gef_ppc9a_init_irq(void)
|
||||
static void __init gef_ppc9a_setup_arch(void)
|
||||
{
|
||||
struct device_node *regs;
|
||||
#ifdef CONFIG_PCI
|
||||
struct device_node *np;
|
||||
|
||||
for_each_compatible_node(np, "pci", "fsl,mpc8641-pcie") {
|
||||
fsl_add_bridge(np, 1);
|
||||
}
|
||||
#endif
|
||||
|
||||
printk(KERN_INFO "GE Intelligent Platforms PPC9A 6U VME SBC\n");
|
||||
|
||||
@ -87,6 +80,8 @@ static void __init gef_ppc9a_setup_arch(void)
|
||||
mpc86xx_smp_init();
|
||||
#endif
|
||||
|
||||
fsl_pci_assign_primary();
|
||||
|
||||
/* Remap basic board registers */
|
||||
regs = of_find_compatible_node(NULL, NULL, "gef,ppc9a-fpga-regs");
|
||||
if (regs) {
|
||||
@ -221,6 +216,7 @@ static long __init mpc86xx_time_init(void)
|
||||
static __initdata struct of_device_id of_bus_ids[] = {
|
||||
{ .compatible = "simple-bus", },
|
||||
{ .compatible = "gianfar", },
|
||||
{ .compatible = "fsl,mpc8641-pcie", },
|
||||
{},
|
||||
};
|
||||
|
||||
@ -231,7 +227,7 @@ static int __init declare_of_platform_devices(void)
|
||||
|
||||
return 0;
|
||||
}
|
||||
machine_device_initcall(gef_ppc9a, declare_of_platform_devices);
|
||||
machine_arch_initcall(gef_ppc9a, declare_of_platform_devices);
|
||||
|
||||
define_machine(gef_ppc9a) {
|
||||
.name = "GE PPC9A",
|
||||
|
||||
@ -73,20 +73,14 @@ static void __init gef_sbc310_init_irq(void)
|
||||
static void __init gef_sbc310_setup_arch(void)
|
||||
{
|
||||
struct device_node *regs;
|
||||
#ifdef CONFIG_PCI
|
||||
struct device_node *np;
|
||||
|
||||
for_each_compatible_node(np, "pci", "fsl,mpc8641-pcie") {
|
||||
fsl_add_bridge(np, 1);
|
||||
}
|
||||
#endif
|
||||
|
||||
printk(KERN_INFO "GE Intelligent Platforms SBC310 6U VPX SBC\n");
|
||||
|
||||
#ifdef CONFIG_SMP
|
||||
mpc86xx_smp_init();
|
||||
#endif
|
||||
|
||||
fsl_pci_assign_primary();
|
||||
|
||||
/* Remap basic board registers */
|
||||
regs = of_find_compatible_node(NULL, NULL, "gef,fpga-regs");
|
||||
if (regs) {
|
||||
@ -209,6 +203,7 @@ static long __init mpc86xx_time_init(void)
|
||||
static __initdata struct of_device_id of_bus_ids[] = {
|
||||
{ .compatible = "simple-bus", },
|
||||
{ .compatible = "gianfar", },
|
||||
{ .compatible = "fsl,mpc8641-pcie", },
|
||||
{},
|
||||
};
|
||||
|
||||
@ -219,7 +214,7 @@ static int __init declare_of_platform_devices(void)
|
||||
|
||||
return 0;
|
||||
}
|
||||
machine_device_initcall(gef_sbc310, declare_of_platform_devices);
|
||||
machine_arch_initcall(gef_sbc310, declare_of_platform_devices);
|
||||
|
||||
define_machine(gef_sbc310) {
|
||||
.name = "GE SBC310",
|
||||
|
||||
@ -73,13 +73,6 @@ static void __init gef_sbc610_init_irq(void)
|
||||
static void __init gef_sbc610_setup_arch(void)
|
||||
{
|
||||
struct device_node *regs;
|
||||
#ifdef CONFIG_PCI
|
||||
struct device_node *np;
|
||||
|
||||
for_each_compatible_node(np, "pci", "fsl,mpc8641-pcie") {
|
||||
fsl_add_bridge(np, 1);
|
||||
}
|
||||
#endif
|
||||
|
||||
printk(KERN_INFO "GE Intelligent Platforms SBC610 6U VPX SBC\n");
|
||||
|
||||
@ -87,6 +80,8 @@ static void __init gef_sbc610_setup_arch(void)
|
||||
mpc86xx_smp_init();
|
||||
#endif
|
||||
|
||||
fsl_pci_assign_primary();
|
||||
|
||||
/* Remap basic board registers */
|
||||
regs = of_find_compatible_node(NULL, NULL, "gef,fpga-regs");
|
||||
if (regs) {
|
||||
@ -198,6 +193,7 @@ static long __init mpc86xx_time_init(void)
|
||||
static __initdata struct of_device_id of_bus_ids[] = {
|
||||
{ .compatible = "simple-bus", },
|
||||
{ .compatible = "gianfar", },
|
||||
{ .compatible = "fsl,mpc8641-pcie", },
|
||||
{},
|
||||
};
|
||||
|
||||
@ -208,7 +204,7 @@ static int __init declare_of_platform_devices(void)
|
||||
|
||||
return 0;
|
||||
}
|
||||
machine_device_initcall(gef_sbc610, declare_of_platform_devices);
|
||||
machine_arch_initcall(gef_sbc610, declare_of_platform_devices);
|
||||
|
||||
define_machine(gef_sbc610) {
|
||||
.name = "GE SBC610",
|
||||
|
||||
@ -91,6 +91,9 @@ static struct of_device_id __initdata mpc8610_ids[] = {
|
||||
{ .compatible = "simple-bus", },
|
||||
/* So that the DMA channel nodes can be probed individually: */
|
||||
{ .compatible = "fsl,eloplus-dma", },
|
||||
/* PCI controllers */
|
||||
{ .compatible = "fsl,mpc8610-pci", },
|
||||
{ .compatible = "fsl,mpc8641-pcie", },
|
||||
{}
|
||||
};
|
||||
|
||||
@ -107,7 +110,7 @@ static int __init mpc8610_declare_of_platform_devices(void)
|
||||
|
||||
return 0;
|
||||
}
|
||||
machine_device_initcall(mpc86xx_hpcd, mpc8610_declare_of_platform_devices);
|
||||
machine_arch_initcall(mpc86xx_hpcd, mpc8610_declare_of_platform_devices);
|
||||
|
||||
#if defined(CONFIG_FB_FSL_DIU) || defined(CONFIG_FB_FSL_DIU_MODULE)
|
||||
|
||||
@ -278,25 +281,13 @@ mpc8610hpcd_valid_monitor_port(enum fsl_diu_monitor_port port)
|
||||
static void __init mpc86xx_hpcd_setup_arch(void)
|
||||
{
|
||||
struct resource r;
|
||||
struct device_node *np;
|
||||
unsigned char *pixis;
|
||||
|
||||
if (ppc_md.progress)
|
||||
ppc_md.progress("mpc86xx_hpcd_setup_arch()", 0);
|
||||
|
||||
#ifdef CONFIG_PCI
|
||||
for_each_node_by_type(np, "pci") {
|
||||
if (of_device_is_compatible(np, "fsl,mpc8610-pci")
|
||||
|| of_device_is_compatible(np, "fsl,mpc8641-pcie")) {
|
||||
struct resource rsrc;
|
||||
of_address_to_resource(np, 0, &rsrc);
|
||||
if ((rsrc.start & 0xfffff) == 0xa000)
|
||||
fsl_add_bridge(np, 1);
|
||||
else
|
||||
fsl_add_bridge(np, 0);
|
||||
}
|
||||
}
|
||||
#endif
|
||||
fsl_pci_assign_primary();
|
||||
|
||||
#if defined(CONFIG_FB_FSL_DIU) || defined(CONFIG_FB_FSL_DIU_MODULE)
|
||||
diu_ops.get_pixel_format = mpc8610hpcd_get_pixel_format;
|
||||
diu_ops.set_gamma_table = mpc8610hpcd_set_gamma_table;
|
||||
|
||||
@ -19,7 +19,6 @@
|
||||
#include <linux/delay.h>
|
||||
#include <linux/seq_file.h>
|
||||
#include <linux/of_platform.h>
|
||||
#include <linux/memblock.h>
|
||||
|
||||
#include <asm/time.h>
|
||||
#include <asm/machdep.h>
|
||||
@ -51,15 +50,8 @@ extern int uli_exclude_device(struct pci_controller *hose,
|
||||
static int mpc86xx_exclude_device(struct pci_controller *hose,
|
||||
u_char bus, u_char devfn)
|
||||
{
|
||||
struct device_node* node;
|
||||
struct resource rsrc;
|
||||
|
||||
node = hose->dn;
|
||||
of_address_to_resource(node, 0, &rsrc);
|
||||
|
||||
if ((rsrc.start & 0xfffff) == 0x8000) {
|
||||
if (hose->dn == fsl_pci_primary)
|
||||
return uli_exclude_device(hose, bus, devfn);
|
||||
}
|
||||
|
||||
return PCIBIOS_SUCCESSFUL;
|
||||
}
|
||||
@ -69,30 +61,11 @@ static int mpc86xx_exclude_device(struct pci_controller *hose,
|
||||
static void __init
|
||||
mpc86xx_hpcn_setup_arch(void)
|
||||
{
|
||||
#ifdef CONFIG_PCI
|
||||
struct device_node *np;
|
||||
struct pci_controller *hose;
|
||||
#endif
|
||||
dma_addr_t max = 0xffffffff;
|
||||
|
||||
if (ppc_md.progress)
|
||||
ppc_md.progress("mpc86xx_hpcn_setup_arch()", 0);
|
||||
|
||||
#ifdef CONFIG_PCI
|
||||
for_each_compatible_node(np, "pci", "fsl,mpc8641-pcie") {
|
||||
struct resource rsrc;
|
||||
of_address_to_resource(np, 0, &rsrc);
|
||||
if ((rsrc.start & 0xfffff) == 0x8000)
|
||||
fsl_add_bridge(np, 1);
|
||||
else
|
||||
fsl_add_bridge(np, 0);
|
||||
hose = pci_find_hose_for_OF_device(np);
|
||||
max = min(max, hose->dma_window_base_cur +
|
||||
hose->dma_window_size);
|
||||
}
|
||||
|
||||
ppc_md.pci_exclude_device = mpc86xx_exclude_device;
|
||||
|
||||
#endif
|
||||
|
||||
printk("MPC86xx HPCN board from Freescale Semiconductor\n");
|
||||
@ -101,13 +74,9 @@ mpc86xx_hpcn_setup_arch(void)
|
||||
mpc86xx_smp_init();
|
||||
#endif
|
||||
|
||||
#ifdef CONFIG_SWIOTLB
|
||||
if ((memblock_end_of_DRAM() - 1) > max) {
|
||||
ppc_swiotlb_enable = 1;
|
||||
set_pci_dma_ops(&swiotlb_dma_ops);
|
||||
ppc_md.pci_dma_dev_setup = pci_dma_dev_setup_swiotlb;
|
||||
}
|
||||
#endif
|
||||
fsl_pci_assign_primary();
|
||||
|
||||
swiotlb_detect_4g();
|
||||
}
|
||||
|
||||
|
||||
@ -162,6 +131,7 @@ static __initdata struct of_device_id of_bus_ids[] = {
|
||||
{ .compatible = "simple-bus", },
|
||||
{ .compatible = "fsl,srio", },
|
||||
{ .compatible = "gianfar", },
|
||||
{ .compatible = "fsl,mpc8641-pcie", },
|
||||
{},
|
||||
};
|
||||
|
||||
@ -171,7 +141,7 @@ static int __init declare_of_platform_devices(void)
|
||||
|
||||
return 0;
|
||||
}
|
||||
machine_device_initcall(mpc86xx_hpcn, declare_of_platform_devices);
|
||||
machine_arch_initcall(mpc86xx_hpcn, declare_of_platform_devices);
|
||||
machine_arch_initcall(mpc86xx_hpcn, swiotlb_setup_bus_notifier);
|
||||
|
||||
define_machine(mpc86xx_hpcn) {
|
||||
|
||||
@ -38,23 +38,16 @@
|
||||
static void __init
|
||||
sbc8641_setup_arch(void)
|
||||
{
|
||||
#ifdef CONFIG_PCI
|
||||
struct device_node *np;
|
||||
#endif
|
||||
|
||||
if (ppc_md.progress)
|
||||
ppc_md.progress("sbc8641_setup_arch()", 0);
|
||||
|
||||
#ifdef CONFIG_PCI
|
||||
for_each_compatible_node(np, "pci", "fsl,mpc8641-pcie")
|
||||
fsl_add_bridge(np, 0);
|
||||
#endif
|
||||
|
||||
printk("SBC8641 board from Wind River\n");
|
||||
|
||||
#ifdef CONFIG_SMP
|
||||
mpc86xx_smp_init();
|
||||
#endif
|
||||
|
||||
fsl_pci_assign_primary();
|
||||
}
|
||||
|
||||
|
||||
@ -102,6 +95,7 @@ mpc86xx_time_init(void)
|
||||
static __initdata struct of_device_id of_bus_ids[] = {
|
||||
{ .compatible = "simple-bus", },
|
||||
{ .compatible = "gianfar", },
|
||||
{ .compatible = "fsl,mpc8641-pcie", },
|
||||
{},
|
||||
};
|
||||
|
||||
@ -111,7 +105,7 @@ static int __init declare_of_platform_devices(void)
|
||||
|
||||
return 0;
|
||||
}
|
||||
machine_device_initcall(sbc8641, declare_of_platform_devices);
|
||||
machine_arch_initcall(sbc8641, declare_of_platform_devices);
|
||||
|
||||
define_machine(sbc8641) {
|
||||
.name = "SBC8641D",
|
||||
|
||||
@ -15,7 +15,7 @@ obj-$(CONFIG_PPC_DCR_NATIVE) += dcr-low.o
|
||||
obj-$(CONFIG_PPC_PMI) += pmi.o
|
||||
obj-$(CONFIG_U3_DART) += dart_iommu.o
|
||||
obj-$(CONFIG_MMIO_NVRAM) += mmio_nvram.o
|
||||
obj-$(CONFIG_FSL_SOC) += fsl_soc.o
|
||||
obj-$(CONFIG_FSL_SOC) += fsl_soc.o fsl_mpic_err.o
|
||||
obj-$(CONFIG_FSL_PCI) += fsl_pci.o $(fsl-msi-obj-y)
|
||||
obj-$(CONFIG_FSL_PMC) += fsl_pmc.o
|
||||
obj-$(CONFIG_FSL_LBC) += fsl_lbc.o
|
||||
|
||||
@ -193,6 +193,16 @@ static struct of_device_id mpc85xx_l2ctlr_of_match[] = {
|
||||
{
|
||||
.compatible = "fsl,mpc8548-l2-cache-controller",
|
||||
},
|
||||
{ .compatible = "fsl,mpc8544-l2-cache-controller",},
|
||||
{ .compatible = "fsl,mpc8572-l2-cache-controller",},
|
||||
{ .compatible = "fsl,mpc8536-l2-cache-controller",},
|
||||
{ .compatible = "fsl,p1021-l2-cache-controller",},
|
||||
{ .compatible = "fsl,p1012-l2-cache-controller",},
|
||||
{ .compatible = "fsl,p1025-l2-cache-controller",},
|
||||
{ .compatible = "fsl,p1016-l2-cache-controller",},
|
||||
{ .compatible = "fsl,p1024-l2-cache-controller",},
|
||||
{ .compatible = "fsl,p1015-l2-cache-controller",},
|
||||
{ .compatible = "fsl,p1010-l2-cache-controller",},
|
||||
{},
|
||||
};
|
||||
|
||||
|
||||
149
arch/powerpc/sysdev/fsl_mpic_err.c
Normal file
149
arch/powerpc/sysdev/fsl_mpic_err.c
Normal file
@ -0,0 +1,149 @@
|
||||
/*
|
||||
* Copyright (C) 2012 Freescale Semiconductor, Inc.
|
||||
*
|
||||
* Author: Varun Sethi <varun.sethi@freescale.com>
|
||||
*
|
||||
* This program is free software; you can redistribute it and/or
|
||||
* modify it under the terms of the GNU General Public License
|
||||
* as published by the Free Software Foundation; version 2 of the
|
||||
* License.
|
||||
*
|
||||
*/
|
||||
|
||||
#include <linux/irq.h>
|
||||
#include <linux/smp.h>
|
||||
#include <linux/interrupt.h>
|
||||
|
||||
#include <asm/io.h>
|
||||
#include <asm/irq.h>
|
||||
#include <asm/mpic.h>
|
||||
|
||||
#include "mpic.h"
|
||||
|
||||
#define MPIC_ERR_INT_BASE 0x3900
|
||||
#define MPIC_ERR_INT_EISR 0x0000
|
||||
#define MPIC_ERR_INT_EIMR 0x0010
|
||||
|
||||
static inline u32 mpic_fsl_err_read(u32 __iomem *base, unsigned int err_reg)
|
||||
{
|
||||
return in_be32(base + (err_reg >> 2));
|
||||
}
|
||||
|
||||
static inline void mpic_fsl_err_write(u32 __iomem *base, u32 value)
|
||||
{
|
||||
out_be32(base + (MPIC_ERR_INT_EIMR >> 2), value);
|
||||
}
|
||||
|
||||
static void fsl_mpic_mask_err(struct irq_data *d)
|
||||
{
|
||||
u32 eimr;
|
||||
struct mpic *mpic = irq_data_get_irq_chip_data(d);
|
||||
unsigned int src = virq_to_hw(d->irq) - mpic->err_int_vecs[0];
|
||||
|
||||
eimr = mpic_fsl_err_read(mpic->err_regs, MPIC_ERR_INT_EIMR);
|
||||
eimr |= (1 << (31 - src));
|
||||
mpic_fsl_err_write(mpic->err_regs, eimr);
|
||||
}
|
||||
|
||||
static void fsl_mpic_unmask_err(struct irq_data *d)
|
||||
{
|
||||
u32 eimr;
|
||||
struct mpic *mpic = irq_data_get_irq_chip_data(d);
|
||||
unsigned int src = virq_to_hw(d->irq) - mpic->err_int_vecs[0];
|
||||
|
||||
eimr = mpic_fsl_err_read(mpic->err_regs, MPIC_ERR_INT_EIMR);
|
||||
eimr &= ~(1 << (31 - src));
|
||||
mpic_fsl_err_write(mpic->err_regs, eimr);
|
||||
}
|
||||
|
||||
static struct irq_chip fsl_mpic_err_chip = {
|
||||
.irq_disable = fsl_mpic_mask_err,
|
||||
.irq_mask = fsl_mpic_mask_err,
|
||||
.irq_unmask = fsl_mpic_unmask_err,
|
||||
};
|
||||
|
||||
int mpic_setup_error_int(struct mpic *mpic, int intvec)
|
||||
{
|
||||
int i;
|
||||
|
||||
mpic->err_regs = ioremap(mpic->paddr + MPIC_ERR_INT_BASE, 0x1000);
|
||||
if (!mpic->err_regs) {
|
||||
pr_err("could not map mpic error registers\n");
|
||||
return -ENOMEM;
|
||||
}
|
||||
mpic->hc_err = fsl_mpic_err_chip;
|
||||
mpic->hc_err.name = mpic->name;
|
||||
mpic->flags |= MPIC_FSL_HAS_EIMR;
|
||||
/* allocate interrupt vectors for error interrupts */
|
||||
for (i = MPIC_MAX_ERR - 1; i >= 0; i--)
|
||||
mpic->err_int_vecs[i] = --intvec;
|
||||
|
||||
return 0;
|
||||
}
|
||||
|
||||
int mpic_map_error_int(struct mpic *mpic, unsigned int virq, irq_hw_number_t hw)
|
||||
{
|
||||
if ((mpic->flags & MPIC_FSL_HAS_EIMR) &&
|
||||
(hw >= mpic->err_int_vecs[0] &&
|
||||
hw <= mpic->err_int_vecs[MPIC_MAX_ERR - 1])) {
|
||||
WARN_ON(mpic->flags & MPIC_SECONDARY);
|
||||
|
||||
pr_debug("mpic: mapping as Error Interrupt\n");
|
||||
irq_set_chip_data(virq, mpic);
|
||||
irq_set_chip_and_handler(virq, &mpic->hc_err,
|
||||
handle_level_irq);
|
||||
return 1;
|
||||
}
|
||||
|
||||
return 0;
|
||||
}
|
||||
|
||||
static irqreturn_t fsl_error_int_handler(int irq, void *data)
|
||||
{
|
||||
struct mpic *mpic = (struct mpic *) data;
|
||||
u32 eisr, eimr;
|
||||
int errint;
|
||||
unsigned int cascade_irq;
|
||||
|
||||
eisr = mpic_fsl_err_read(mpic->err_regs, MPIC_ERR_INT_EISR);
|
||||
eimr = mpic_fsl_err_read(mpic->err_regs, MPIC_ERR_INT_EIMR);
|
||||
|
||||
if (!(eisr & ~eimr))
|
||||
return IRQ_NONE;
|
||||
|
||||
while (eisr) {
|
||||
errint = __builtin_clz(eisr);
|
||||
cascade_irq = irq_linear_revmap(mpic->irqhost,
|
||||
mpic->err_int_vecs[errint]);
|
||||
WARN_ON(cascade_irq == NO_IRQ);
|
||||
if (cascade_irq != NO_IRQ) {
|
||||
generic_handle_irq(cascade_irq);
|
||||
} else {
|
||||
eimr |= 1 << (31 - errint);
|
||||
mpic_fsl_err_write(mpic->err_regs, eimr);
|
||||
}
|
||||
eisr &= ~(1 << (31 - errint));
|
||||
}
|
||||
|
||||
return IRQ_HANDLED;
|
||||
}
|
||||
|
||||
void mpic_err_int_init(struct mpic *mpic, irq_hw_number_t irqnum)
|
||||
{
|
||||
unsigned int virq;
|
||||
int ret;
|
||||
|
||||
virq = irq_create_mapping(mpic->irqhost, irqnum);
|
||||
if (virq == NO_IRQ) {
|
||||
pr_err("Error interrupt setup failed\n");
|
||||
return;
|
||||
}
|
||||
|
||||
/* Mask all error interrupts */
|
||||
mpic_fsl_err_write(mpic->err_regs, ~0);
|
||||
|
||||
ret = request_irq(virq, fsl_error_int_handler, IRQF_NO_THREAD,
|
||||
"mpic-error-int", mpic);
|
||||
if (ret)
|
||||
pr_err("Failed to register error interrupt handler\n");
|
||||
}
|
||||
@ -143,18 +143,20 @@ static void __init setup_pci_atmu(struct pci_controller *hose,
|
||||
pr_debug("PCI memory map start 0x%016llx, size 0x%016llx\n",
|
||||
(u64)rsrc->start, (u64)resource_size(rsrc));
|
||||
|
||||
if (of_device_is_compatible(hose->dn, "fsl,qoriq-pcie-v2.2")) {
|
||||
win_idx = 2;
|
||||
start_idx = 0;
|
||||
end_idx = 3;
|
||||
}
|
||||
|
||||
pci = ioremap(rsrc->start, resource_size(rsrc));
|
||||
if (!pci) {
|
||||
dev_err(hose->parent, "Unable to map ATMU registers\n");
|
||||
return;
|
||||
}
|
||||
|
||||
if (early_find_capability(hose, 0, 0, PCI_CAP_ID_EXP)) {
|
||||
if (in_be32(&pci->block_rev1) >= PCIE_IP_REV_2_2) {
|
||||
win_idx = 2;
|
||||
start_idx = 0;
|
||||
end_idx = 3;
|
||||
}
|
||||
}
|
||||
|
||||
/* Disable all windows (except powar0 since it's ignored) */
|
||||
for(i = 1; i < 5; i++)
|
||||
out_be32(&pci->pow[i].powar, 0);
|
||||
@ -818,6 +820,7 @@ static const struct of_device_id pci_ids[] = {
|
||||
{ .compatible = "fsl,p1010-pcie", },
|
||||
{ .compatible = "fsl,p1023-pcie", },
|
||||
{ .compatible = "fsl,p4080-pcie", },
|
||||
{ .compatible = "fsl,qoriq-pcie-v2.4", },
|
||||
{ .compatible = "fsl,qoriq-pcie-v2.3", },
|
||||
{ .compatible = "fsl,qoriq-pcie-v2.2", },
|
||||
{},
|
||||
@ -825,57 +828,78 @@ static const struct of_device_id pci_ids[] = {
|
||||
|
||||
struct device_node *fsl_pci_primary;
|
||||
|
||||
void __devinit fsl_pci_init(void)
|
||||
void fsl_pci_assign_primary(void)
|
||||
{
|
||||
struct device_node *np;
|
||||
|
||||
/* Callers can specify the primary bus using other means. */
|
||||
if (fsl_pci_primary)
|
||||
return;
|
||||
|
||||
/* If a PCI host bridge contains an ISA node, it's primary. */
|
||||
np = of_find_node_by_type(NULL, "isa");
|
||||
while ((fsl_pci_primary = of_get_parent(np))) {
|
||||
of_node_put(np);
|
||||
np = fsl_pci_primary;
|
||||
|
||||
if (of_match_node(pci_ids, np) && of_device_is_available(np))
|
||||
return;
|
||||
}
|
||||
|
||||
/*
|
||||
* If there's no PCI host bridge with ISA, arbitrarily
|
||||
* designate one as primary. This can go away once
|
||||
* various bugs with primary-less systems are fixed.
|
||||
*/
|
||||
for_each_matching_node(np, pci_ids) {
|
||||
if (of_device_is_available(np)) {
|
||||
fsl_pci_primary = np;
|
||||
of_node_put(np);
|
||||
return;
|
||||
}
|
||||
}
|
||||
}
|
||||
|
||||
static int __devinit fsl_pci_probe(struct platform_device *pdev)
|
||||
{
|
||||
int ret;
|
||||
struct device_node *node;
|
||||
struct pci_controller *hose;
|
||||
dma_addr_t max = 0xffffffff;
|
||||
|
||||
/* Callers can specify the primary bus using other means. */
|
||||
if (!fsl_pci_primary) {
|
||||
/* If a PCI host bridge contains an ISA node, it's primary. */
|
||||
node = of_find_node_by_type(NULL, "isa");
|
||||
while ((fsl_pci_primary = of_get_parent(node))) {
|
||||
of_node_put(node);
|
||||
node = fsl_pci_primary;
|
||||
|
||||
if (of_match_node(pci_ids, node))
|
||||
break;
|
||||
}
|
||||
}
|
||||
|
||||
node = NULL;
|
||||
for_each_node_by_type(node, "pci") {
|
||||
if (of_match_node(pci_ids, node)) {
|
||||
/*
|
||||
* If there's no PCI host bridge with ISA, arbitrarily
|
||||
* designate one as primary. This can go away once
|
||||
* various bugs with primary-less systems are fixed.
|
||||
*/
|
||||
if (!fsl_pci_primary)
|
||||
fsl_pci_primary = node;
|
||||
|
||||
ret = fsl_add_bridge(node, fsl_pci_primary == node);
|
||||
if (ret == 0) {
|
||||
hose = pci_find_hose_for_OF_device(node);
|
||||
max = min(max, hose->dma_window_base_cur +
|
||||
hose->dma_window_size);
|
||||
}
|
||||
}
|
||||
}
|
||||
node = pdev->dev.of_node;
|
||||
ret = fsl_add_bridge(node, fsl_pci_primary == node);
|
||||
|
||||
#ifdef CONFIG_SWIOTLB
|
||||
/*
|
||||
* if we couldn't map all of DRAM via the dma windows
|
||||
* we need SWIOTLB to handle buffers located outside of
|
||||
* dma capable memory region
|
||||
*/
|
||||
if (memblock_end_of_DRAM() - 1 > max) {
|
||||
ppc_swiotlb_enable = 1;
|
||||
set_pci_dma_ops(&swiotlb_dma_ops);
|
||||
ppc_md.pci_dma_dev_setup = pci_dma_dev_setup_swiotlb;
|
||||
if (ret == 0) {
|
||||
hose = pci_find_hose_for_OF_device(pdev->dev.of_node);
|
||||
|
||||
/*
|
||||
* if we couldn't map all of DRAM via the dma windows
|
||||
* we need SWIOTLB to handle buffers located outside of
|
||||
* dma capable memory region
|
||||
*/
|
||||
if (memblock_end_of_DRAM() - 1 > hose->dma_window_base_cur +
|
||||
hose->dma_window_size)
|
||||
ppc_swiotlb_enable = 1;
|
||||
}
|
||||
#endif
|
||||
|
||||
mpc85xx_pci_err_probe(pdev);
|
||||
|
||||
return 0;
|
||||
}
|
||||
|
||||
static struct platform_driver fsl_pci_driver = {
|
||||
.driver = {
|
||||
.name = "fsl-pci",
|
||||
.of_match_table = pci_ids,
|
||||
},
|
||||
.probe = fsl_pci_probe,
|
||||
};
|
||||
|
||||
static int __init fsl_pci_init(void)
|
||||
{
|
||||
return platform_driver_register(&fsl_pci_driver);
|
||||
}
|
||||
arch_initcall(fsl_pci_init);
|
||||
#endif
|
||||
|
||||
@ -16,6 +16,7 @@
|
||||
|
||||
#define PCIE_LTSSM 0x0404 /* PCIE Link Training and Status */
|
||||
#define PCIE_LTSSM_L0 0x16 /* L0 state */
|
||||
#define PCIE_IP_REV_2_2 0x02080202 /* PCIE IP block version Rev2.2 */
|
||||
#define PIWAR_EN 0x80000000 /* Enable */
|
||||
#define PIWAR_PF 0x20000000 /* prefetch */
|
||||
#define PIWAR_TGI_LOCAL 0x00f00000 /* target - local memory */
|
||||
@ -57,7 +58,9 @@ struct ccsr_pci {
|
||||
__be32 pex_pme_mes_disr; /* 0x.024 - PCIE PME and message disable register */
|
||||
__be32 pex_pme_mes_ier; /* 0x.028 - PCIE PME and message interrupt enable register */
|
||||
__be32 pex_pmcr; /* 0x.02c - PCIE power management command register */
|
||||
u8 res3[3024];
|
||||
u8 res3[3016];
|
||||
__be32 block_rev1; /* 0x.bf8 - PCIE Block Revision register 1 */
|
||||
__be32 block_rev2; /* 0x.bfc - PCIE Block Revision register 2 */
|
||||
|
||||
/* PCI/PCI Express outbound window 0-4
|
||||
* Window 0 is the default window and is the only window enabled upon reset.
|
||||
@ -95,10 +98,19 @@ u64 fsl_pci_immrbar_base(struct pci_controller *hose);
|
||||
|
||||
extern struct device_node *fsl_pci_primary;
|
||||
|
||||
#ifdef CONFIG_FSL_PCI
|
||||
void fsl_pci_init(void);
|
||||
#ifdef CONFIG_PCI
|
||||
void fsl_pci_assign_primary(void);
|
||||
#else
|
||||
static inline void fsl_pci_init(void) {}
|
||||
static inline void fsl_pci_assign_primary(void) {}
|
||||
#endif
|
||||
|
||||
#ifdef CONFIG_EDAC_MPC85XX
|
||||
int mpc85xx_pci_err_probe(struct platform_device *op);
|
||||
#else
|
||||
static inline int mpc85xx_pci_err_probe(struct platform_device *op)
|
||||
{
|
||||
return -ENOTSUPP;
|
||||
}
|
||||
#endif
|
||||
|
||||
#endif /* __POWERPC_FSL_PCI_H */
|
||||
|
||||
@ -6,7 +6,7 @@
|
||||
* with various broken implementations of this HW.
|
||||
*
|
||||
* Copyright (C) 2004 Benjamin Herrenschmidt, IBM Corp.
|
||||
* Copyright 2010-2011 Freescale Semiconductor, Inc.
|
||||
* Copyright 2010-2012 Freescale Semiconductor, Inc.
|
||||
*
|
||||
* This file is subject to the terms and conditions of the GNU General Public
|
||||
* License. See the file COPYING in the main directory of this archive
|
||||
@ -221,24 +221,24 @@ static inline void _mpic_ipi_write(struct mpic *mpic, unsigned int ipi, u32 valu
|
||||
_mpic_write(mpic->reg_type, &mpic->gregs, offset, value);
|
||||
}
|
||||
|
||||
static inline unsigned int mpic_tm_offset(struct mpic *mpic, unsigned int tm)
|
||||
{
|
||||
return (tm >> 2) * MPIC_TIMER_GROUP_STRIDE +
|
||||
(tm & 3) * MPIC_INFO(TIMER_STRIDE);
|
||||
}
|
||||
|
||||
static inline u32 _mpic_tm_read(struct mpic *mpic, unsigned int tm)
|
||||
{
|
||||
unsigned int offset = MPIC_INFO(TIMER_VECTOR_PRI) +
|
||||
((tm & 3) * MPIC_INFO(TIMER_STRIDE));
|
||||
|
||||
if (tm >= 4)
|
||||
offset += 0x1000 / 4;
|
||||
unsigned int offset = mpic_tm_offset(mpic, tm) +
|
||||
MPIC_INFO(TIMER_VECTOR_PRI);
|
||||
|
||||
return _mpic_read(mpic->reg_type, &mpic->tmregs, offset);
|
||||
}
|
||||
|
||||
static inline void _mpic_tm_write(struct mpic *mpic, unsigned int tm, u32 value)
|
||||
{
|
||||
unsigned int offset = MPIC_INFO(TIMER_VECTOR_PRI) +
|
||||
((tm & 3) * MPIC_INFO(TIMER_STRIDE));
|
||||
|
||||
if (tm >= 4)
|
||||
offset += 0x1000 / 4;
|
||||
unsigned int offset = mpic_tm_offset(mpic, tm) +
|
||||
MPIC_INFO(TIMER_VECTOR_PRI);
|
||||
|
||||
_mpic_write(mpic->reg_type, &mpic->tmregs, offset, value);
|
||||
}
|
||||
@ -1026,6 +1026,9 @@ static int mpic_host_map(struct irq_domain *h, unsigned int virq,
|
||||
return 0;
|
||||
}
|
||||
|
||||
if (mpic_map_error_int(mpic, virq, hw))
|
||||
return 0;
|
||||
|
||||
if (hw >= mpic->num_sources)
|
||||
return -EINVAL;
|
||||
|
||||
@ -1085,7 +1088,16 @@ static int mpic_host_xlate(struct irq_domain *h, struct device_node *ct,
|
||||
*/
|
||||
switch (intspec[2]) {
|
||||
case 0:
|
||||
case 1: /* no EISR/EIMR support for now, treat as shared IRQ */
|
||||
break;
|
||||
case 1:
|
||||
if (!(mpic->flags & MPIC_FSL_HAS_EIMR))
|
||||
break;
|
||||
|
||||
if (intspec[3] >= ARRAY_SIZE(mpic->err_int_vecs))
|
||||
return -EINVAL;
|
||||
|
||||
*out_hwirq = mpic->err_int_vecs[intspec[3]];
|
||||
|
||||
break;
|
||||
case 2:
|
||||
if (intspec[0] >= ARRAY_SIZE(mpic->ipi_vecs))
|
||||
@ -1301,6 +1313,42 @@ struct mpic * __init mpic_alloc(struct device_node *node,
|
||||
mpic_map(mpic, mpic->paddr, &mpic->gregs, MPIC_INFO(GREG_BASE), 0x1000);
|
||||
mpic_map(mpic, mpic->paddr, &mpic->tmregs, MPIC_INFO(TIMER_BASE), 0x1000);
|
||||
|
||||
if (mpic->flags & MPIC_FSL) {
|
||||
u32 brr1, version;
|
||||
int ret;
|
||||
|
||||
/*
|
||||
* Yes, Freescale really did put global registers in the
|
||||
* magic per-cpu area -- and they don't even show up in the
|
||||
* non-magic per-cpu copies that this driver normally uses.
|
||||
*/
|
||||
mpic_map(mpic, mpic->paddr, &mpic->thiscpuregs,
|
||||
MPIC_CPU_THISBASE, 0x1000);
|
||||
|
||||
brr1 = _mpic_read(mpic->reg_type, &mpic->thiscpuregs,
|
||||
MPIC_FSL_BRR1);
|
||||
version = brr1 & MPIC_FSL_BRR1_VER;
|
||||
|
||||
/* Error interrupt mask register (EIMR) is required for
|
||||
* handling individual device error interrupts. EIMR
|
||||
* was added in MPIC version 4.1.
|
||||
*
|
||||
* Over here we reserve vector number space for error
|
||||
* interrupt vectors. This space is stolen from the
|
||||
* global vector number space, as in case of ipis
|
||||
* and timer interrupts.
|
||||
*
|
||||
* Available vector space = intvec_top - 12, where 12
|
||||
* is the number of vectors which have been consumed by
|
||||
* ipis and timer interrupts.
|
||||
*/
|
||||
if (version >= 0x401) {
|
||||
ret = mpic_setup_error_int(mpic, intvec_top - 12);
|
||||
if (ret)
|
||||
return NULL;
|
||||
}
|
||||
}
|
||||
|
||||
/* Reset */
|
||||
|
||||
/* When using a device-node, reset requests are only honored if the MPIC
|
||||
@ -1440,6 +1488,7 @@ void __init mpic_assign_isu(struct mpic *mpic, unsigned int isu_num,
|
||||
void __init mpic_init(struct mpic *mpic)
|
||||
{
|
||||
int i, cpu;
|
||||
int num_timers = 4;
|
||||
|
||||
BUG_ON(mpic->num_sources == 0);
|
||||
|
||||
@ -1448,15 +1497,34 @@ void __init mpic_init(struct mpic *mpic)
|
||||
/* Set current processor priority to max */
|
||||
mpic_cpu_write(MPIC_INFO(CPU_CURRENT_TASK_PRI), 0xf);
|
||||
|
||||
if (mpic->flags & MPIC_FSL) {
|
||||
u32 brr1 = _mpic_read(mpic->reg_type, &mpic->thiscpuregs,
|
||||
MPIC_FSL_BRR1);
|
||||
u32 version = brr1 & MPIC_FSL_BRR1_VER;
|
||||
|
||||
/*
|
||||
* Timer group B is present at the latest in MPIC 3.1 (e.g.
|
||||
* mpc8536). It is not present in MPIC 2.0 (e.g. mpc8544).
|
||||
* I don't know about the status of intermediate versions (or
|
||||
* whether they even exist).
|
||||
*/
|
||||
if (version >= 0x0301)
|
||||
num_timers = 8;
|
||||
}
|
||||
|
||||
/* FSL mpic error interrupt intialization */
|
||||
if (mpic->flags & MPIC_FSL_HAS_EIMR)
|
||||
mpic_err_int_init(mpic, MPIC_FSL_ERR_INT);
|
||||
|
||||
/* Initialize timers to our reserved vectors and mask them for now */
|
||||
for (i = 0; i < 4; i++) {
|
||||
for (i = 0; i < num_timers; i++) {
|
||||
unsigned int offset = mpic_tm_offset(mpic, i);
|
||||
|
||||
mpic_write(mpic->tmregs,
|
||||
i * MPIC_INFO(TIMER_STRIDE) +
|
||||
MPIC_INFO(TIMER_DESTINATION),
|
||||
offset + MPIC_INFO(TIMER_DESTINATION),
|
||||
1 << hard_smp_processor_id());
|
||||
mpic_write(mpic->tmregs,
|
||||
i * MPIC_INFO(TIMER_STRIDE) +
|
||||
MPIC_INFO(TIMER_VECTOR_PRI),
|
||||
offset + MPIC_INFO(TIMER_VECTOR_PRI),
|
||||
MPIC_VECPRI_MASK |
|
||||
(9 << MPIC_VECPRI_PRIORITY_SHIFT) |
|
||||
(mpic->timer_vecs[0] + i));
|
||||
|
||||
@ -40,4 +40,26 @@ extern int mpic_set_affinity(struct irq_data *d,
|
||||
const struct cpumask *cpumask, bool force);
|
||||
extern void mpic_reset_core(int cpu);
|
||||
|
||||
#ifdef CONFIG_FSL_SOC
|
||||
extern int mpic_map_error_int(struct mpic *mpic, unsigned int virq, irq_hw_number_t hw);
|
||||
extern void mpic_err_int_init(struct mpic *mpic, irq_hw_number_t irqnum);
|
||||
extern int mpic_setup_error_int(struct mpic *mpic, int intvec);
|
||||
#else
|
||||
static inline int mpic_map_error_int(struct mpic *mpic, unsigned int virq, irq_hw_number_t hw)
|
||||
{
|
||||
return 0;
|
||||
}
|
||||
|
||||
|
||||
static inline void mpic_err_int_init(struct mpic *mpic, irq_hw_number_t irqnum)
|
||||
{
|
||||
return;
|
||||
}
|
||||
|
||||
static inline int mpic_setup_error_int(struct mpic *mpic, int intvec)
|
||||
{
|
||||
return -1;
|
||||
}
|
||||
#endif
|
||||
|
||||
#endif /* _POWERPC_SYSDEV_MPIC_H */
|
||||
|
||||
Some files were not shown because too many files have changed in this diff Show More
Loading…
Reference in New Issue
Block a user