diff --git a/MAINTAINERS b/MAINTAINERS index 8a2f019d1239..f1c9aa89f6a4 100644 --- a/MAINTAINERS +++ b/MAINTAINERS @@ -19460,6 +19460,7 @@ L: linux-media@vger.kernel.org S: Maintained T: git git://linuxtv.org/media_tree.git F: Documentation/devicetree/bindings/media/i2c/sony,imx296.yaml +F: drivers/media/i2c/imx296.c SONY IMX319 SENSOR DRIVER M: Bingbu Cao diff --git a/drivers/media/i2c/Kconfig b/drivers/media/i2c/Kconfig index 12ba8542778f..438bb506017f 100644 --- a/drivers/media/i2c/Kconfig +++ b/drivers/media/i2c/Kconfig @@ -162,6 +162,19 @@ config VIDEO_IMX290 To compile this driver as a module, choose M here: the module will be called imx290. +config VIDEO_IMX296 + tristate "Sony IMX296 sensor support" + depends on I2C && VIDEO_DEV + select MEDIA_CONTROLLER + select V4L2_FWNODE + select VIDEO_V4L2_SUBDEV_API + help + This is a Video4Linux2 sensor driver for the Sony + IMX296 camera. + + To compile this driver as a module, choose M here: the + module will be called imx296. + config VIDEO_IMX319 tristate "Sony IMX319 sensor support" depends on I2C && VIDEO_DEV diff --git a/drivers/media/i2c/Makefile b/drivers/media/i2c/Makefile index b611a8277d57..28178d4c512a 100644 --- a/drivers/media/i2c/Makefile +++ b/drivers/media/i2c/Makefile @@ -43,6 +43,7 @@ obj-$(CONFIG_VIDEO_IMX219) += imx219.o obj-$(CONFIG_VIDEO_IMX258) += imx258.o obj-$(CONFIG_VIDEO_IMX274) += imx274.o obj-$(CONFIG_VIDEO_IMX290) += imx290.o +obj-$(CONFIG_VIDEO_IMX296) += imx296.o obj-$(CONFIG_VIDEO_IMX319) += imx319.o obj-$(CONFIG_VIDEO_IMX334) += imx334.o obj-$(CONFIG_VIDEO_IMX335) += imx335.o diff --git a/drivers/media/i2c/imx296.c b/drivers/media/i2c/imx296.c new file mode 100644 index 000000000000..3c12b6edeac9 --- /dev/null +++ b/drivers/media/i2c/imx296.c @@ -0,0 +1,1172 @@ +// SPDX-License-Identifier: GPL-2.0 +/* + * Driver for IMX296 CMOS Image Sensor from Sony + * + * Copyright 2019 Laurent Pinchart + */ + +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include + +#include +#include +#include + +#define IMX296_PIXEL_ARRAY_WIDTH 1456 +#define IMX296_PIXEL_ARRAY_HEIGHT 1088 + +#define IMX296_REG_8BIT(n) ((1 << 16) | (n)) +#define IMX296_REG_16BIT(n) ((2 << 16) | (n)) +#define IMX296_REG_24BIT(n) ((3 << 16) | (n)) +#define IMX296_REG_SIZE_SHIFT 16 +#define IMX296_REG_ADDR_MASK 0xffff + +#define IMX296_CTRL00 IMX296_REG_8BIT(0x3000) +#define IMX296_CTRL00_STANDBY BIT(0) +#define IMX296_CTRL08 IMX296_REG_8BIT(0x3008) +#define IMX296_CTRL08_REGHOLD BIT(0) +#define IMX296_CTRL0A IMX296_REG_8BIT(0x300a) +#define IMX296_CTRL0A_XMSTA BIT(0) +#define IMX296_CTRL0B IMX296_REG_8BIT(0x300b) +#define IMX296_CTRL0B_TRIGEN BIT(0) +#define IMX296_CTRL0D IMX296_REG_8BIT(0x300d) +#define IMX296_CTRL0D_WINMODE_ALL (0 << 0) +#define IMX296_CTRL0D_WINMODE_FD_BINNING (2 << 0) +#define IMX296_CTRL0D_HADD_ON_BINNING BIT(5) +#define IMX296_CTRL0D_SAT_CNT BIT(6) +#define IMX296_CTRL0E IMX296_REG_8BIT(0x300e) +#define IMX296_CTRL0E_VREVERSE BIT(0) +#define IMX296_CTRL0E_HREVERSE BIT(1) +#define IMX296_VMAX IMX296_REG_24BIT(0x3010) +#define IMX296_HMAX IMX296_REG_16BIT(0x3014) +#define IMX296_TMDCTRL IMX296_REG_8BIT(0x301d) +#define IMX296_TMDCTRL_LATCH BIT(0) +#define IMX296_TMDOUT IMX296_REG_16BIT(0x301e) +#define IMX296_TMDOUT_MASK 0x3ff +#define IMX296_WDSEL IMX296_REG_8BIT(0x3021) +#define IMX296_WDSEL_NORMAL (0 << 0) +#define IMX296_WDSEL_MULTI_2 (1 << 0) +#define IMX296_WDSEL_MULTI_4 (3 << 0) +#define IMX296_BLKLEVELAUTO IMX296_REG_8BIT(0x3022) +#define IMX296_BLKLEVELAUTO_ON 0x01 +#define IMX296_BLKLEVELAUTO_OFF 0xf0 +#define IMX296_SST IMX296_REG_8BIT(0x3024) +#define IMX296_SST_EN BIT(0) +#define IMX296_CTRLTOUT IMX296_REG_8BIT(0x3026) +#define IMX296_CTRLTOUT_TOUT1SEL_LOW (0 << 0) +#define IMX296_CTRLTOUT_TOUT1SEL_PULSE (3 << 0) +#define IMX296_CTRLTOUT_TOUT2SEL_LOW (0 << 2) +#define IMX296_CTRLTOUT_TOUT2SEL_PULSE (3 << 2) +#define IMX296_CTRLTRIG IMX296_REG_8BIT(0x3029) +#define IMX296_CTRLTRIG_TOUT1_SEL_LOW (0 << 0) +#define IMX296_CTRLTRIG_TOUT1_SEL_PULSE1 (1 << 0) +#define IMX296_CTRLTRIG_TOUT2_SEL_LOW (0 << 4) +#define IMX296_CTRLTRIG_TOUT2_SEL_PULSE2 (2 << 4) +#define IMX296_SYNCSEL IMX296_REG_8BIT(0x3036) +#define IMX296_SYNCSEL_NORMAL 0xc0 +#define IMX296_SYNCSEL_HIZ 0xf0 +#define IMX296_PULSE1 IMX296_REG_8BIT(0x306d) +#define IMX296_PULSE1_EN_NOR BIT(0) +#define IMX296_PULSE1_EN_TRIG BIT(1) +#define IMX296_PULSE1_POL_HIGH (0 << 2) +#define IMX296_PULSE1_POL_LOW (1 << 2) +#define IMX296_PULSE1_UP IMX296_REG_24BIT(0x3070) +#define IMX296_PULSE1_DN IMX296_REG_24BIT(0x3074) +#define IMX296_PULSE2 IMX296_REG_8BIT(0x3079) +#define IMX296_PULSE2_EN_NOR BIT(0) +#define IMX296_PULSE2_EN_TRIG BIT(1) +#define IMX296_PULSE2_POL_HIGH (0 << 2) +#define IMX296_PULSE2_POL_LOW (1 << 2) +#define IMX296_PULSE2_UP IMX296_REG_24BIT(0x307c) +#define IMX296_PULSE2_DN IMX296_REG_24BIT(0x3080) +#define IMX296_INCKSEL(n) IMX296_REG_8BIT(0x3089 + (n)) +#define IMX296_SHS1 IMX296_REG_24BIT(0x308d) +#define IMX296_SHS2 IMX296_REG_24BIT(0x3090) +#define IMX296_SHS3 IMX296_REG_24BIT(0x3094) +#define IMX296_SHS4 IMX296_REG_24BIT(0x3098) +#define IMX296_VBLANKLP IMX296_REG_8BIT(0x309c) +#define IMX296_VBLANKLP_NORMAL 0x04 +#define IMX296_VBLANKLP_LOW_POWER 0x2c +#define IMX296_EXP_CNT IMX296_REG_8BIT(0x30a3) +#define IMX296_EXP_CNT_RESET BIT(0) +#define IMX296_EXP_MAX IMX296_REG_16BIT(0x30a6) +#define IMX296_VINT IMX296_REG_8BIT(0x30aa) +#define IMX296_VINT_EN BIT(0) +#define IMX296_LOWLAGTRG IMX296_REG_8BIT(0x30ae) +#define IMX296_LOWLAGTRG_FAST BIT(0) +#define IMX296_I2CCTRL IMX296_REG_8BIT(0x30ef) +#define IMX296_I2CCTRL_I2CACKEN BIT(0) + +#define IMX296_SENSOR_INFO IMX296_REG_16BIT(0x3148) +#define IMX296_SENSOR_INFO_MONO BIT(15) +#define IMX296_SENSOR_INFO_IMX296LQ 0x4a00 +#define IMX296_SENSOR_INFO_IMX296LL 0xca00 +#define IMX296_S_SHSA IMX296_REG_16BIT(0x31ca) +#define IMX296_S_SHSB IMX296_REG_16BIT(0x31d2) +/* + * Registers 0x31c8 to 0x31cd, 0x31d0 to 0x31d5, 0x31e2, 0x31e3, 0x31ea and + * 0x31eb are related to exposure mode but otherwise not documented. + */ + +#define IMX296_GAINCTRL IMX296_REG_8BIT(0x3200) +#define IMX296_GAINCTRL_WD_GAIN_MODE_NORMAL 0x01 +#define IMX296_GAINCTRL_WD_GAIN_MODE_MULTI 0x41 +#define IMX296_GAIN IMX296_REG_16BIT(0x3204) +#define IMX296_GAIN_MIN 0 +#define IMX296_GAIN_MAX 480 +#define IMX296_GAIN1 IMX296_REG_16BIT(0x3208) +#define IMX296_GAIN2 IMX296_REG_16BIT(0x320c) +#define IMX296_GAIN3 IMX296_REG_16BIT(0x3210) +#define IMX296_GAINDLY IMX296_REG_8BIT(0x3212) +#define IMX296_GAINDLY_NONE 0x08 +#define IMX296_GAINDLY_1FRAME 0x09 +#define IMX296_PGCTRL IMX296_REG_8BIT(0x3238) +#define IMX296_PGCTRL_REGEN BIT(0) +#define IMX296_PGCTRL_THRU BIT(1) +#define IMX296_PGCTRL_CLKEN BIT(2) +#define IMX296_PGCTRL_MODE(n) ((n) << 3) +#define IMX296_PGHPOS IMX296_REG_16BIT(0x3239) +#define IMX296_PGVPOS IMX296_REG_16BIT(0x323c) +#define IMX296_PGHPSTEP IMX296_REG_8BIT(0x323e) +#define IMX296_PGVPSTEP IMX296_REG_8BIT(0x323f) +#define IMX296_PGHPNUM IMX296_REG_8BIT(0x3240) +#define IMX296_PGVPNUM IMX296_REG_8BIT(0x3241) +#define IMX296_PGDATA1 IMX296_REG_16BIT(0x3244) +#define IMX296_PGDATA2 IMX296_REG_16BIT(0x3246) +#define IMX296_PGHGSTEP IMX296_REG_8BIT(0x3249) +#define IMX296_BLKLEVEL IMX296_REG_16BIT(0x3254) + +#define IMX296_FID0_ROI IMX296_REG_8BIT(0x3300) +#define IMX296_FID0_ROIH1ON BIT(0) +#define IMX296_FID0_ROIV1ON BIT(1) +#define IMX296_FID0_ROIPH1 IMX296_REG_16BIT(0x3310) +#define IMX296_FID0_ROIPV1 IMX296_REG_16BIT(0x3312) +#define IMX296_FID0_ROIWH1 IMX296_REG_16BIT(0x3314) +#define IMX296_FID0_ROIWH1_MIN 80 +#define IMX296_FID0_ROIWV1 IMX296_REG_16BIT(0x3316) +#define IMX296_FID0_ROIWV1_MIN 4 + +#define IMX296_CM_HSST_STARTTMG IMX296_REG_16BIT(0x4018) +#define IMX296_CM_HSST_ENDTMG IMX296_REG_16BIT(0x401a) +#define IMX296_DA_HSST_STARTTMG IMX296_REG_16BIT(0x404d) +#define IMX296_DA_HSST_ENDTMG IMX296_REG_16BIT(0x4050) +#define IMX296_LM_HSST_STARTTMG IMX296_REG_16BIT(0x4094) +#define IMX296_LM_HSST_ENDTMG IMX296_REG_16BIT(0x4096) +#define IMX296_SST_SIEASTA1_SET IMX296_REG_8BIT(0x40c9) +#define IMX296_SST_SIEASTA1PRE_1U IMX296_REG_16BIT(0x40cc) +#define IMX296_SST_SIEASTA1PRE_1D IMX296_REG_16BIT(0x40ce) +#define IMX296_SST_SIEASTA1PRE_2U IMX296_REG_16BIT(0x40d0) +#define IMX296_SST_SIEASTA1PRE_2D IMX296_REG_16BIT(0x40d2) +#define IMX296_HSST IMX296_REG_8BIT(0x40dc) +#define IMX296_HSST_EN BIT(2) + +#define IMX296_CKREQSEL IMX296_REG_8BIT(0x4101) +#define IMX296_CKREQSEL_HS BIT(2) +#define IMX296_GTTABLENUM IMX296_REG_8BIT(0x4114) +#define IMX296_CTRL418C IMX296_REG_8BIT(0x418c) + +struct imx296_clk_params { + unsigned int freq; + u8 incksel[4]; + u8 ctrl418c; +}; + +static const struct imx296_clk_params imx296_clk_params[] = { + { 37125000, { 0x80, 0x0b, 0x80, 0x08 }, 116 }, + { 54000000, { 0xb0, 0x0f, 0xb0, 0x0c }, 168 }, + { 74250000, { 0x80, 0x0f, 0x80, 0x0c }, 232 }, +}; + +static const char * const imx296_supply_names[] = { + "dvdd", + "ovdd", + "avdd", +}; + +struct imx296 { + struct device *dev; + struct clk *clk; + struct regulator_bulk_data supplies[ARRAY_SIZE(imx296_supply_names)]; + struct gpio_desc *reset; + struct regmap *regmap; + + const struct imx296_clk_params *clk_params; + bool mono; + + bool streaming; + + struct v4l2_subdev subdev; + struct media_pad pad; + + struct v4l2_ctrl_handler ctrls; + struct v4l2_ctrl *hblank; + struct v4l2_ctrl *vblank; +}; + +static inline struct imx296 *to_imx296(struct v4l2_subdev *sd) +{ + return container_of(sd, struct imx296, subdev); +} + +static int imx296_read(struct imx296 *sensor, u32 addr) +{ + u8 data[3] = { 0, 0, 0 }; + int ret; + + ret = regmap_raw_read(sensor->regmap, addr & IMX296_REG_ADDR_MASK, data, + (addr >> IMX296_REG_SIZE_SHIFT) & 3); + if (ret < 0) + return ret; + + return (data[2] << 16) | (data[1] << 8) | data[0]; +} + +static int imx296_write(struct imx296 *sensor, u32 addr, u32 value, int *err) +{ + u8 data[3] = { value & 0xff, (value >> 8) & 0xff, value >> 16 }; + int ret; + + if (err && *err) + return *err; + + ret = regmap_raw_write(sensor->regmap, addr & IMX296_REG_ADDR_MASK, + data, (addr >> IMX296_REG_SIZE_SHIFT) & 3); + if (ret < 0) { + dev_err(sensor->dev, "%u-bit write to 0x%04x failed: %d\n", + ((addr >> IMX296_REG_SIZE_SHIFT) & 3) * 8, + addr & IMX296_REG_ADDR_MASK, ret); + if (err) + *err = ret; + } + + return ret; +} + +static int imx296_power_on(struct imx296 *sensor) +{ + int ret; + + ret = regulator_bulk_enable(ARRAY_SIZE(sensor->supplies), + sensor->supplies); + if (ret < 0) + return ret; + + udelay(1); + + ret = gpiod_direction_output(sensor->reset, 0); + if (ret < 0) + goto err_supply; + + udelay(1); + + ret = clk_prepare_enable(sensor->clk); + if (ret < 0) + goto err_reset; + + /* + * The documentation doesn't explicitly say how much time is required + * after providing a clock and before starting I2C communication. It + * mentions a delay of 20µs in 4-wire mode, but tests showed that a + * delay of 100µs resulted in I2C communication failures, while 500µs + * seems to be enough. Be conservative. + */ + usleep_range(1000, 2000); + + return 0; + +err_reset: + gpiod_direction_output(sensor->reset, 1); +err_supply: + regulator_bulk_disable(ARRAY_SIZE(sensor->supplies), sensor->supplies); + return ret; +} + +static void imx296_power_off(struct imx296 *sensor) +{ + clk_disable_unprepare(sensor->clk); + gpiod_direction_output(sensor->reset, 1); + regulator_bulk_disable(ARRAY_SIZE(sensor->supplies), sensor->supplies); +} + +/* ----------------------------------------------------------------------------- + * Controls + */ + +static const char * const imx296_test_pattern_menu[] = { + "Disabled", + "Multiple Pixels", + "Sequence 1", + "Sequence 2", + "Gradient", + "Row", + "Column", + "Cross", + "Stripe", + "Checks", +}; + +static int imx296_s_ctrl(struct v4l2_ctrl *ctrl) +{ + struct imx296 *sensor = container_of(ctrl->handler, struct imx296, ctrls); + const struct v4l2_mbus_framefmt *format; + struct v4l2_subdev_state *state; + unsigned int vmax; + int ret = 0; + + if (!sensor->streaming) + return 0; + + state = v4l2_subdev_get_locked_active_state(&sensor->subdev); + format = v4l2_subdev_get_pad_format(&sensor->subdev, state, 0); + + switch (ctrl->id) { + case V4L2_CID_EXPOSURE: + /* Clamp the exposure value to VMAX. */ + vmax = format->height + sensor->vblank->cur.val; + ctrl->val = min_t(int, ctrl->val, vmax); + imx296_write(sensor, IMX296_SHS1, vmax - ctrl->val, &ret); + break; + + case V4L2_CID_ANALOGUE_GAIN: + imx296_write(sensor, IMX296_GAIN, ctrl->val, &ret); + break; + + case V4L2_CID_VBLANK: + imx296_write(sensor, IMX296_VMAX, format->height + ctrl->val, + &ret); + break; + + case V4L2_CID_TEST_PATTERN: + if (ctrl->val) { + imx296_write(sensor, IMX296_PGHPOS, 8, &ret); + imx296_write(sensor, IMX296_PGVPOS, 8, &ret); + imx296_write(sensor, IMX296_PGHPSTEP, 8, &ret); + imx296_write(sensor, IMX296_PGVPSTEP, 8, &ret); + imx296_write(sensor, IMX296_PGHPNUM, 100, &ret); + imx296_write(sensor, IMX296_PGVPNUM, 100, &ret); + imx296_write(sensor, IMX296_PGDATA1, 0x300, &ret); + imx296_write(sensor, IMX296_PGDATA2, 0x100, &ret); + imx296_write(sensor, IMX296_PGHGSTEP, 0, &ret); + imx296_write(sensor, IMX296_BLKLEVEL, 0, &ret); + imx296_write(sensor, IMX296_BLKLEVELAUTO, + IMX296_BLKLEVELAUTO_OFF, &ret); + imx296_write(sensor, IMX296_PGCTRL, + IMX296_PGCTRL_REGEN | + IMX296_PGCTRL_CLKEN | + IMX296_PGCTRL_MODE(ctrl->val - 1), &ret); + } else { + imx296_write(sensor, IMX296_PGCTRL, + IMX296_PGCTRL_CLKEN, &ret); + imx296_write(sensor, IMX296_BLKLEVEL, 0x3c, &ret); + imx296_write(sensor, IMX296_BLKLEVELAUTO, + IMX296_BLKLEVELAUTO_ON, &ret); + } + break; + + default: + ret = -EINVAL; + break; + } + + return ret; +} + +static const struct v4l2_ctrl_ops imx296_ctrl_ops = { + .s_ctrl = imx296_s_ctrl, +}; + +static int imx296_ctrls_init(struct imx296 *sensor) +{ + struct v4l2_fwnode_device_properties props; + unsigned int hblank; + int ret; + + ret = v4l2_fwnode_device_parse(sensor->dev, &props); + if (ret < 0) + return ret; + + v4l2_ctrl_handler_init(&sensor->ctrls, 9); + + v4l2_ctrl_new_std(&sensor->ctrls, &imx296_ctrl_ops, + V4L2_CID_EXPOSURE, 1, 1048575, 1, 1104); + v4l2_ctrl_new_std(&sensor->ctrls, &imx296_ctrl_ops, + V4L2_CID_ANALOGUE_GAIN, IMX296_GAIN_MIN, + IMX296_GAIN_MAX, 1, IMX296_GAIN_MIN); + + /* + * Horizontal blanking is controlled through the HMAX register, which + * contains a line length in INCK clock units. The INCK frequency is + * fixed to 74.25 MHz. The HMAX value is currently fixed to 1100, + * convert it to a number of pixels based on the nominal pixel rate. + */ + hblank = 1100 * 1188000000ULL / 10 / 74250000 + - IMX296_PIXEL_ARRAY_WIDTH; + sensor->hblank = v4l2_ctrl_new_std(&sensor->ctrls, &imx296_ctrl_ops, + V4L2_CID_HBLANK, hblank, hblank, 1, + hblank); + if (sensor->hblank) + sensor->hblank->flags |= V4L2_CTRL_FLAG_READ_ONLY; + + sensor->vblank = v4l2_ctrl_new_std(&sensor->ctrls, &imx296_ctrl_ops, + V4L2_CID_VBLANK, 30, + 1048575 - IMX296_PIXEL_ARRAY_HEIGHT, + 1, 30); + /* + * The sensor calculates the MIPI timings internally to achieve a bit + * rate between 1122 and 1198 Mbps. The exact value is unfortunately not + * reported, at least according to the documentation. Report a nominal + * rate of 1188 Mbps as that is used by the datasheet in multiple + * examples. + */ + v4l2_ctrl_new_std(&sensor->ctrls, NULL, V4L2_CID_PIXEL_RATE, + 1122000000 / 10, 1198000000 / 10, 1, 1188000000 / 10); + v4l2_ctrl_new_std_menu_items(&sensor->ctrls, &imx296_ctrl_ops, + V4L2_CID_TEST_PATTERN, + ARRAY_SIZE(imx296_test_pattern_menu) - 1, + 0, 0, imx296_test_pattern_menu); + + v4l2_ctrl_new_fwnode_properties(&sensor->ctrls, &imx296_ctrl_ops, + &props); + + if (sensor->ctrls.error) { + dev_err(sensor->dev, "failed to add controls (%d)\n", + sensor->ctrls.error); + v4l2_ctrl_handler_free(&sensor->ctrls); + return sensor->ctrls.error; + } + + sensor->subdev.ctrl_handler = &sensor->ctrls; + + return 0; +} + +/* ----------------------------------------------------------------------------- + * V4L2 Subdev Operations + */ + +/* + * This table is extracted from vendor data that is entirely undocumented. The + * first register write is required to activate the CSI-2 output. The other + * entries may or may not be optional? + */ +static const struct { + unsigned int reg; + unsigned int value; +} imx296_init_table[] = { + { IMX296_REG_8BIT(0x3005), 0xf0 }, + { IMX296_REG_8BIT(0x309e), 0x04 }, + { IMX296_REG_8BIT(0x30a0), 0x04 }, + { IMX296_REG_8BIT(0x30a1), 0x3c }, + { IMX296_REG_8BIT(0x30a4), 0x5f }, + { IMX296_REG_8BIT(0x30a8), 0x91 }, + { IMX296_REG_8BIT(0x30ac), 0x28 }, + { IMX296_REG_8BIT(0x30af), 0x09 }, + { IMX296_REG_8BIT(0x30df), 0x00 }, + { IMX296_REG_8BIT(0x3165), 0x00 }, + { IMX296_REG_8BIT(0x3169), 0x10 }, + { IMX296_REG_8BIT(0x316a), 0x02 }, + { IMX296_REG_8BIT(0x31c8), 0xf3 }, /* Exposure-related */ + { IMX296_REG_8BIT(0x31d0), 0xf4 }, /* Exposure-related */ + { IMX296_REG_8BIT(0x321a), 0x00 }, + { IMX296_REG_8BIT(0x3226), 0x02 }, + { IMX296_REG_8BIT(0x3256), 0x01 }, + { IMX296_REG_8BIT(0x3541), 0x72 }, + { IMX296_REG_8BIT(0x3516), 0x77 }, + { IMX296_REG_8BIT(0x350b), 0x7f }, + { IMX296_REG_8BIT(0x3758), 0xa3 }, + { IMX296_REG_8BIT(0x3759), 0x00 }, + { IMX296_REG_8BIT(0x375a), 0x85 }, + { IMX296_REG_8BIT(0x375b), 0x00 }, + { IMX296_REG_8BIT(0x3832), 0xf5 }, + { IMX296_REG_8BIT(0x3833), 0x00 }, + { IMX296_REG_8BIT(0x38a2), 0xf6 }, + { IMX296_REG_8BIT(0x38a3), 0x00 }, + { IMX296_REG_8BIT(0x3a00), 0x80 }, + { IMX296_REG_8BIT(0x3d48), 0xa3 }, + { IMX296_REG_8BIT(0x3d49), 0x00 }, + { IMX296_REG_8BIT(0x3d4a), 0x85 }, + { IMX296_REG_8BIT(0x3d4b), 0x00 }, + { IMX296_REG_8BIT(0x400e), 0x58 }, + { IMX296_REG_8BIT(0x4014), 0x1c }, + { IMX296_REG_8BIT(0x4041), 0x2a }, + { IMX296_REG_8BIT(0x40a2), 0x06 }, + { IMX296_REG_8BIT(0x40c1), 0xf6 }, + { IMX296_REG_8BIT(0x40c7), 0x0f }, + { IMX296_REG_8BIT(0x40c8), 0x00 }, + { IMX296_REG_8BIT(0x4174), 0x00 }, +}; + +static int imx296_setup(struct imx296 *sensor, struct v4l2_subdev_state *state) +{ + const struct v4l2_mbus_framefmt *format; + const struct v4l2_rect *crop; + unsigned int i; + int ret = 0; + + format = v4l2_subdev_get_pad_format(&sensor->subdev, state, 0); + crop = v4l2_subdev_get_pad_crop(&sensor->subdev, state, 0); + + for (i = 0; i < ARRAY_SIZE(imx296_init_table); ++i) + imx296_write(sensor, imx296_init_table[i].reg, + imx296_init_table[i].value, &ret); + + if (crop->width != IMX296_PIXEL_ARRAY_WIDTH || + crop->height != IMX296_PIXEL_ARRAY_HEIGHT) { + imx296_write(sensor, IMX296_FID0_ROI, + IMX296_FID0_ROIH1ON | IMX296_FID0_ROIV1ON, &ret); + imx296_write(sensor, IMX296_FID0_ROIPH1, crop->left, &ret); + imx296_write(sensor, IMX296_FID0_ROIPV1, crop->top, &ret); + imx296_write(sensor, IMX296_FID0_ROIWH1, crop->width, &ret); + imx296_write(sensor, IMX296_FID0_ROIWV1, crop->height, &ret); + } else { + imx296_write(sensor, IMX296_FID0_ROI, 0, &ret); + } + + imx296_write(sensor, IMX296_CTRL0D, + (crop->width != format->width ? + IMX296_CTRL0D_HADD_ON_BINNING : 0) | + (crop->height != format->height ? + IMX296_CTRL0D_WINMODE_FD_BINNING : 0), + &ret); + + /* + * HMAX and VMAX configure horizontal and vertical blanking by + * specifying the total line time and frame time respectively. The line + * time is specified in operational clock units (which appears to be the + * output of an internal PLL, fixed at 74.25 MHz regardless of the + * exernal clock frequency), while the frame time is specified as a + * number of lines. + * + * In the vertical direction the sensor outputs the following: + * + * - one line for the FS packet + * - two lines of embedded data (DT 0x12) + * - six null lines (DT 0x10) + * - four lines of vertical effective optical black (DT 0x37) + * - 8 to 1088 lines of active image data (RAW10, DT 0x2b) + * - one line for the FE packet + * - 16 or more lines of vertical blanking + */ + imx296_write(sensor, IMX296_HMAX, 1100, &ret); + imx296_write(sensor, IMX296_VMAX, + format->height + sensor->vblank->cur.val, &ret); + + for (i = 0; i < ARRAY_SIZE(sensor->clk_params->incksel); ++i) + imx296_write(sensor, IMX296_INCKSEL(i), + sensor->clk_params->incksel[i], &ret); + imx296_write(sensor, IMX296_GTTABLENUM, 0xc5, &ret); + imx296_write(sensor, IMX296_CTRL418C, sensor->clk_params->ctrl418c, + &ret); + + imx296_write(sensor, IMX296_GAINDLY, IMX296_GAINDLY_NONE, &ret); + imx296_write(sensor, IMX296_BLKLEVEL, 0x03c, &ret); + + return ret; +} + +static int imx296_stream_on(struct imx296 *sensor) +{ + int ret = 0; + + imx296_write(sensor, IMX296_CTRL00, 0, &ret); + usleep_range(2000, 5000); + imx296_write(sensor, IMX296_CTRL0A, 0, &ret); + + return ret; +} + +static int imx296_stream_off(struct imx296 *sensor) +{ + int ret = 0; + + imx296_write(sensor, IMX296_CTRL0A, IMX296_CTRL0A_XMSTA, &ret); + imx296_write(sensor, IMX296_CTRL00, IMX296_CTRL00_STANDBY, &ret); + + return ret; +} + +static int imx296_s_stream(struct v4l2_subdev *sd, int enable) +{ + struct imx296 *sensor = to_imx296(sd); + struct v4l2_subdev_state *state; + int ret; + + state = v4l2_subdev_lock_and_get_active_state(sd); + + if (!enable) { + ret = imx296_stream_off(sensor); + + pm_runtime_mark_last_busy(sensor->dev); + pm_runtime_put_autosuspend(sensor->dev); + + sensor->streaming = false; + + goto unlock; + } + + ret = pm_runtime_resume_and_get(sensor->dev); + if (ret < 0) + goto unlock; + + ret = imx296_setup(sensor, state); + if (ret < 0) + goto err_pm; + + /* + * Set streaming to true to ensure __v4l2_ctrl_handler_setup() will set + * the controls. The flag is reset to false further down if an error + * occurs. + */ + sensor->streaming = true; + + ret = __v4l2_ctrl_handler_setup(&sensor->ctrls); + if (ret < 0) + goto err_pm; + + ret = imx296_stream_on(sensor); + if (ret) + goto err_pm; + +unlock: + v4l2_subdev_unlock_state(state); + + return ret; + +err_pm: + /* + * In case of error, turn the power off synchronously as the device + * likely has no other chance to recover. + */ + pm_runtime_put_sync(sensor->dev); + sensor->streaming = false; + + goto unlock; +} + +static int imx296_enum_mbus_code(struct v4l2_subdev *sd, + struct v4l2_subdev_state *state, + struct v4l2_subdev_mbus_code_enum *code) +{ + struct imx296 *sensor = to_imx296(sd); + + if (code->index != 0) + return -EINVAL; + + code->code = sensor->mono ? MEDIA_BUS_FMT_Y10_1X10 + : MEDIA_BUS_FMT_SBGGR10_1X10; + + return 0; +} + +static int imx296_enum_frame_size(struct v4l2_subdev *sd, + struct v4l2_subdev_state *state, + struct v4l2_subdev_frame_size_enum *fse) +{ + const struct v4l2_mbus_framefmt *format; + + format = v4l2_subdev_get_pad_format(sd, state, fse->pad); + + if (fse->index >= 2 || fse->code != format->code) + return -EINVAL; + + fse->min_width = IMX296_PIXEL_ARRAY_WIDTH / (fse->index + 1); + fse->max_width = fse->min_width; + fse->min_height = IMX296_PIXEL_ARRAY_HEIGHT / (fse->index + 1); + fse->max_height = fse->min_height; + + return 0; +} + +static int imx296_get_format(struct v4l2_subdev *sd, + struct v4l2_subdev_state *state, + struct v4l2_subdev_format *fmt) +{ + fmt->format = *v4l2_subdev_get_pad_format(sd, state, fmt->pad); + + return 0; +} + +static int imx296_set_format(struct v4l2_subdev *sd, + struct v4l2_subdev_state *state, + struct v4l2_subdev_format *fmt) +{ + struct imx296 *sensor = to_imx296(sd); + struct v4l2_mbus_framefmt *format; + struct v4l2_rect *crop; + + crop = v4l2_subdev_get_pad_crop(sd, state, fmt->pad); + format = v4l2_subdev_get_pad_format(sd, state, fmt->pad); + + /* + * Binning is only allowed when cropping is disabled according to the + * documentation. This should be double-checked. + */ + if (crop->width == IMX296_PIXEL_ARRAY_WIDTH && + crop->height == IMX296_PIXEL_ARRAY_HEIGHT) { + unsigned int width; + unsigned int height; + unsigned int hratio; + unsigned int vratio; + + /* Clamp the width and height to avoid dividing by zero. */ + width = clamp_t(unsigned int, fmt->format.width, + crop->width / 2, crop->width); + height = clamp_t(unsigned int, fmt->format.height, + crop->height / 2, crop->height); + + hratio = DIV_ROUND_CLOSEST(crop->width, width); + vratio = DIV_ROUND_CLOSEST(crop->height, height); + + format->width = crop->width / hratio; + format->height = crop->height / vratio; + } else { + format->width = crop->width; + format->height = crop->height; + } + + format->code = sensor->mono ? MEDIA_BUS_FMT_Y10_1X10 + : MEDIA_BUS_FMT_SBGGR10_1X10; + format->field = V4L2_FIELD_NONE; + format->colorspace = V4L2_COLORSPACE_RAW; + format->ycbcr_enc = V4L2_YCBCR_ENC_DEFAULT; + format->quantization = V4L2_QUANTIZATION_FULL_RANGE; + format->xfer_func = V4L2_XFER_FUNC_NONE; + + fmt->format = *format; + + return 0; +} + +static int imx296_get_selection(struct v4l2_subdev *sd, + struct v4l2_subdev_state *state, + struct v4l2_subdev_selection *sel) +{ + switch (sel->target) { + case V4L2_SEL_TGT_CROP: + sel->r = *v4l2_subdev_get_pad_crop(sd, state, sel->pad); + break; + + case V4L2_SEL_TGT_CROP_DEFAULT: + case V4L2_SEL_TGT_CROP_BOUNDS: + case V4L2_SEL_TGT_NATIVE_SIZE: + sel->r.left = 0; + sel->r.top = 0; + sel->r.width = IMX296_PIXEL_ARRAY_WIDTH; + sel->r.height = IMX296_PIXEL_ARRAY_HEIGHT; + break; + + default: + return -EINVAL; + } + + return 0; +} + +static int imx296_set_selection(struct v4l2_subdev *sd, + struct v4l2_subdev_state *state, + struct v4l2_subdev_selection *sel) +{ + struct v4l2_mbus_framefmt *format; + struct v4l2_rect *crop; + struct v4l2_rect rect; + + if (sel->target != V4L2_SEL_TGT_CROP) + return -EINVAL; + + /* + * Clamp the crop rectangle boundaries and align them to a multiple of 4 + * pixels to satisfy hardware requirements. + */ + rect.left = clamp(ALIGN(sel->r.left, 4), 0, + IMX296_PIXEL_ARRAY_WIDTH - IMX296_FID0_ROIWH1_MIN); + rect.top = clamp(ALIGN(sel->r.top, 4), 0, + IMX296_PIXEL_ARRAY_HEIGHT - IMX296_FID0_ROIWV1_MIN); + rect.width = clamp_t(unsigned int, ALIGN(sel->r.width, 4), + IMX296_FID0_ROIWH1_MIN, IMX296_PIXEL_ARRAY_WIDTH); + rect.height = clamp_t(unsigned int, ALIGN(sel->r.height, 4), + IMX296_FID0_ROIWV1_MIN, IMX296_PIXEL_ARRAY_HEIGHT); + + rect.width = min_t(unsigned int, rect.width, + IMX296_PIXEL_ARRAY_WIDTH - rect.left); + rect.height = min_t(unsigned int, rect.height, + IMX296_PIXEL_ARRAY_HEIGHT - rect.top); + + crop = v4l2_subdev_get_pad_crop(sd, state, sel->pad); + + if (rect.width != crop->width || rect.height != crop->height) { + /* + * Reset the output image size if the crop rectangle size has + * been modified. + */ + format = v4l2_subdev_get_pad_format(sd, state, sel->pad); + format->width = rect.width; + format->height = rect.height; + } + + *crop = rect; + sel->r = rect; + + return 0; +} + +static int imx296_init_cfg(struct v4l2_subdev *sd, + struct v4l2_subdev_state *state) +{ + struct v4l2_subdev_selection sel = { + .target = V4L2_SEL_TGT_CROP, + .r.width = IMX296_PIXEL_ARRAY_WIDTH, + .r.height = IMX296_PIXEL_ARRAY_HEIGHT, + }; + struct v4l2_subdev_format format = { + .format = { + .width = IMX296_PIXEL_ARRAY_WIDTH, + .height = IMX296_PIXEL_ARRAY_HEIGHT, + }, + }; + + imx296_set_selection(sd, state, &sel); + imx296_set_format(sd, state, &format); + + return 0; +} + +static const struct v4l2_subdev_video_ops imx296_subdev_video_ops = { + .s_stream = imx296_s_stream, +}; + +static const struct v4l2_subdev_pad_ops imx296_subdev_pad_ops = { + .enum_mbus_code = imx296_enum_mbus_code, + .enum_frame_size = imx296_enum_frame_size, + .get_fmt = imx296_get_format, + .set_fmt = imx296_set_format, + .get_selection = imx296_get_selection, + .set_selection = imx296_set_selection, + .init_cfg = imx296_init_cfg, +}; + +static const struct v4l2_subdev_ops imx296_subdev_ops = { + .video = &imx296_subdev_video_ops, + .pad = &imx296_subdev_pad_ops, +}; + +static int imx296_subdev_init(struct imx296 *sensor) +{ + struct i2c_client *client = to_i2c_client(sensor->dev); + int ret; + + v4l2_i2c_subdev_init(&sensor->subdev, client, &imx296_subdev_ops); + + ret = imx296_ctrls_init(sensor); + if (ret < 0) + return ret; + + sensor->subdev.flags |= V4L2_SUBDEV_FL_HAS_DEVNODE; + sensor->pad.flags = MEDIA_PAD_FL_SOURCE; + sensor->subdev.entity.function = MEDIA_ENT_F_CAM_SENSOR; + ret = media_entity_pads_init(&sensor->subdev.entity, 1, &sensor->pad); + if (ret < 0) { + v4l2_ctrl_handler_free(&sensor->ctrls); + return ret; + } + + sensor->subdev.state_lock = sensor->subdev.ctrl_handler->lock; + + v4l2_subdev_init_finalize(&sensor->subdev); + + return ret; +} + +static void imx296_subdev_cleanup(struct imx296 *sensor) +{ + media_entity_cleanup(&sensor->subdev.entity); + v4l2_ctrl_handler_free(&sensor->ctrls); +} + +/* ----------------------------------------------------------------------------- + * Power management + */ + +static int __maybe_unused imx296_runtime_resume(struct device *dev) +{ + struct i2c_client *client = to_i2c_client(dev); + struct v4l2_subdev *subdev = i2c_get_clientdata(client); + struct imx296 *sensor = to_imx296(subdev); + + return imx296_power_on(sensor); +} + +static int __maybe_unused imx296_runtime_suspend(struct device *dev) +{ + struct i2c_client *client = to_i2c_client(dev); + struct v4l2_subdev *subdev = i2c_get_clientdata(client); + struct imx296 *sensor = to_imx296(subdev); + + imx296_power_off(sensor); + + return 0; +} + +static const struct dev_pm_ops imx296_pm_ops = { + SET_RUNTIME_PM_OPS(imx296_runtime_suspend, imx296_runtime_resume, NULL) +}; + +/* ----------------------------------------------------------------------------- + * Probe & Remove + */ + +static int imx296_read_temperature(struct imx296 *sensor, int *temp) +{ + int tmdout; + int ret; + + ret = imx296_write(sensor, IMX296_TMDCTRL, IMX296_TMDCTRL_LATCH, NULL); + if (ret < 0) + return ret; + + tmdout = imx296_read(sensor, IMX296_TMDOUT) & IMX296_TMDOUT_MASK; + if (tmdout < 0) + return tmdout; + + /* T(°C) = 246.312 - 0.304 * TMDOUT */; + *temp = 246312 - 304 * tmdout; + + return imx296_write(sensor, IMX296_TMDCTRL, 0, NULL); +} + +static int imx296_identify_model(struct imx296 *sensor) +{ + unsigned int model; + int temp = 0; + int ret; + + model = (uintptr_t)of_device_get_match_data(sensor->dev); + if (model) { + dev_dbg(sensor->dev, + "sensor model auto-detection disabled, forcing 0x%04x\n", + model); + sensor->mono = model & IMX296_SENSOR_INFO_MONO; + return 0; + } + + /* + * While most registers can be read when the sensor is in standby, this + * is not the case of the sensor info register :-( + */ + ret = imx296_write(sensor, IMX296_CTRL00, 0, NULL); + if (ret < 0) { + dev_err(sensor->dev, + "failed to get sensor out of standby (%d)\n", ret); + return ret; + } + + ret = imx296_read(sensor, IMX296_SENSOR_INFO); + if (ret < 0) { + dev_err(sensor->dev, "failed to read sensor information (%d)\n", + ret); + goto done; + } + + model = (ret >> 6) & 0x1ff; + + switch (model) { + case 296: + sensor->mono = ret & IMX296_SENSOR_INFO_MONO; + break; + /* + * The IMX297 seems to share features with the IMX296, it may be + * possible to support it in the same driver. + */ + case 297: + default: + dev_err(sensor->dev, "invalid device model 0x%04x\n", ret); + ret = -ENODEV; + goto done; + } + + ret = imx296_read_temperature(sensor, &temp); + if (ret < 0) + goto done; + + dev_info(sensor->dev, "found IMX%u%s (%u.%uC)\n", model, + sensor->mono ? "LL" : "LQ", temp / 1000, (temp / 100) % 10); + +done: + imx296_write(sensor, IMX296_CTRL00, IMX296_CTRL00_STANDBY, NULL); + return ret; +} + +static const struct regmap_config imx296_regmap_config = { + .reg_bits = 16, + .val_bits = 8, + + .wr_table = &(const struct regmap_access_table) { + .no_ranges = (const struct regmap_range[]) { + { + .range_min = IMX296_SENSOR_INFO & 0xffff, + .range_max = (IMX296_SENSOR_INFO & 0xffff) + 1, + }, + }, + .n_no_ranges = 1, + }, +}; + +static int imx296_probe(struct i2c_client *client) +{ + struct i2c_adapter *adapter = to_i2c_adapter(client->dev.parent); + unsigned long clk_rate; + struct imx296 *sensor; + unsigned int i; + int ret; + + if (!i2c_check_functionality(adapter, I2C_FUNC_SMBUS_BYTE_DATA)) { + dev_warn(&adapter->dev, + "I2C-Adapter doesn't support I2C_FUNC_SMBUS_BYTE\n"); + return -EIO; + } + + sensor = devm_kzalloc(&client->dev, sizeof(*sensor), GFP_KERNEL); + if (!sensor) + return -ENOMEM; + + sensor->dev = &client->dev; + + /* Acquire resources. */ + for (i = 0; i < ARRAY_SIZE(sensor->supplies); ++i) + sensor->supplies[i].supply = imx296_supply_names[i]; + + ret = devm_regulator_bulk_get(sensor->dev, ARRAY_SIZE(sensor->supplies), + sensor->supplies); + if (ret) { + dev_err_probe(sensor->dev, ret, "failed to get supplies\n"); + return ret; + } + + sensor->reset = devm_gpiod_get_optional(sensor->dev, "reset", + GPIOD_OUT_HIGH); + if (IS_ERR(sensor->reset)) + return dev_err_probe(sensor->dev, PTR_ERR(sensor->reset), + "failed to get reset GPIO\n"); + + sensor->clk = devm_clk_get(sensor->dev, "inck"); + if (IS_ERR(sensor->clk)) + return dev_err_probe(sensor->dev, PTR_ERR(sensor->clk), + "failed to get clock\n"); + + clk_rate = clk_get_rate(sensor->clk); + for (i = 0; i < ARRAY_SIZE(imx296_clk_params); ++i) { + if (clk_rate == imx296_clk_params[i].freq) { + sensor->clk_params = &imx296_clk_params[i]; + break; + } + } + + if (!sensor->clk_params) { + dev_err(sensor->dev, "unsupported clock rate %lu\n", clk_rate); + return -EINVAL; + } + + sensor->regmap = devm_regmap_init_i2c(client, &imx296_regmap_config); + if (IS_ERR(sensor->regmap)) + return PTR_ERR(sensor->regmap); + + /* + * Enable power management. The driver supports runtime PM, but needs to + * work when runtime PM is disabled in the kernel. To that end, power + * the sensor on manually here, identify it, and fully initialize it. + */ + ret = imx296_power_on(sensor); + if (ret < 0) + return ret; + + ret = imx296_identify_model(sensor); + if (ret < 0) + goto err_power; + + /* Initialize the V4L2 subdev. */ + ret = imx296_subdev_init(sensor); + if (ret < 0) + goto err_power; + + /* + * Enable runtime PM. As the device has been powered manually, mark it + * as active, and increase the usage count without resuming the device. + */ + pm_runtime_set_active(sensor->dev); + pm_runtime_get_noresume(sensor->dev); + pm_runtime_enable(sensor->dev); + + /* Register the V4L2 subdev. */ + ret = v4l2_async_register_subdev(&sensor->subdev); + if (ret < 0) + goto err_pm; + + /* + * Finally, enable autosuspend and decrease the usage count. The device + * will get suspended after the autosuspend delay, turning the power + * off. + */ + pm_runtime_set_autosuspend_delay(sensor->dev, 1000); + pm_runtime_use_autosuspend(sensor->dev); + pm_runtime_put_autosuspend(sensor->dev); + + return 0; + +err_pm: + pm_runtime_disable(sensor->dev); + pm_runtime_put_noidle(sensor->dev); + imx296_subdev_cleanup(sensor); +err_power: + imx296_power_off(sensor); + return ret; +} + +static void imx296_remove(struct i2c_client *client) +{ + struct v4l2_subdev *subdev = i2c_get_clientdata(client); + struct imx296 *sensor = to_imx296(subdev); + + v4l2_async_unregister_subdev(subdev); + + imx296_subdev_cleanup(sensor); + + /* + * Disable runtime PM. In case runtime PM is disabled in the kernel, + * make sure to turn power off manually. + */ + pm_runtime_disable(sensor->dev); + if (!pm_runtime_status_suspended(sensor->dev)) + imx296_power_off(sensor); + pm_runtime_set_suspended(sensor->dev); +} + +static const struct of_device_id imx296_of_match[] = { + { .compatible = "sony,imx296", .data = NULL }, + { .compatible = "sony,imx296ll", .data = (void *)IMX296_SENSOR_INFO_IMX296LL }, + { .compatible = "sony,imx296lq", .data = (void *)IMX296_SENSOR_INFO_IMX296LQ }, + { /* sentinel */ }, +}; +MODULE_DEVICE_TABLE(of, imx296_of_match); + +static struct i2c_driver imx296_i2c_driver = { + .driver = { + .of_match_table = imx296_of_match, + .name = "imx296", + .pm = &imx296_pm_ops + }, + .probe_new = imx296_probe, + .remove = imx296_remove, +}; + +module_i2c_driver(imx296_i2c_driver); + +MODULE_DESCRIPTION("Sony IMX296 Camera driver"); +MODULE_AUTHOR("Laurent Pinchart "); +MODULE_LICENSE("GPL");