selftests: microchip: add test for QoS support on KSZ9477 switch family
Add tests covering following functionality on KSZ9477 switch family: - default port priority - global DSCP to Internal Priority Mapping - apptrust configuration This script was tested on KSZ9893R Signed-off-by: Oleksij Rempel <o.rempel@pengutronix.de> Signed-off-by: David S. Miller <davem@davemloft.net>
This commit is contained in:
Oleksij Rempel
David S. Miller
parent
c2e722657f
commit
cbc7afffc5
668
tools/testing/selftests/drivers/net/microchip/ksz9477_qos.sh
Executable file
668
tools/testing/selftests/drivers/net/microchip/ksz9477_qos.sh
Executable file
@ -0,0 +1,668 @@
|
||||
#!/bin/bash
|
||||
# SPDX-License-Identifier: GPL-2.0
|
||||
# Copyright (c) 2024 Pengutronix, Oleksij Rempel <kernel@pengutronix.de>
|
||||
|
||||
# The script is adopted to work with the Microchip KSZ switch driver.
|
||||
|
||||
ETH_FCS_LEN=4
|
||||
|
||||
WAIT_TIME=1
|
||||
NUM_NETIFS=4
|
||||
REQUIRE_JQ="yes"
|
||||
REQUIRE_MZ="yes"
|
||||
STABLE_MAC_ADDRS=yes
|
||||
NETIF_CREATE=no
|
||||
lib_dir=$(dirname $0)/../../../net/forwarding
|
||||
source $lib_dir/tc_common.sh
|
||||
source $lib_dir/lib.sh
|
||||
|
||||
require_command dcb
|
||||
|
||||
h1=${NETIFS[p1]}
|
||||
swp1=${NETIFS[p2]}
|
||||
swp2=${NETIFS[p3]}
|
||||
h2=${NETIFS[p4]}
|
||||
|
||||
H1_IPV4="192.0.2.1"
|
||||
H2_IPV4="192.0.2.2"
|
||||
H1_IPV6="2001:db8:1::1"
|
||||
H2_IPV6="2001:db8:1::2"
|
||||
|
||||
# On h1_ and h2_create do not set IP addresses to avoid interaction with the
|
||||
# system, to keep packet counters clean.
|
||||
h1_create()
|
||||
{
|
||||
simple_if_init $h1
|
||||
sysctl_set net.ipv6.conf.${h1}.disable_ipv6 1
|
||||
# Get the MAC address of the interface to use it with mausezahn
|
||||
h1_mac=$(ip -j link show dev ${h1} | jq -e '.[].address')
|
||||
}
|
||||
|
||||
h1_destroy()
|
||||
{
|
||||
sysctl_restore net.ipv6.conf.${h1}.disable_ipv6
|
||||
simple_if_fini $h1
|
||||
}
|
||||
|
||||
h2_create()
|
||||
{
|
||||
simple_if_init $h2
|
||||
sysctl_set net.ipv6.conf.${h2}.disable_ipv6 1
|
||||
h2_mac=$(ip -j link show dev ${h2} | jq -e '.[].address')
|
||||
}
|
||||
|
||||
h2_destroy()
|
||||
{
|
||||
sysctl_restore net.ipv6.conf.${h2}.disable_ipv6
|
||||
simple_if_fini $h2
|
||||
}
|
||||
|
||||
switch_create()
|
||||
{
|
||||
ip link set ${swp1} up
|
||||
ip link set ${swp2} up
|
||||
sysctl_set net.ipv6.conf.${swp1}.disable_ipv6 1
|
||||
sysctl_set net.ipv6.conf.${swp2}.disable_ipv6 1
|
||||
|
||||
# Ports should trust VLAN PCP even with vlan_filtering=0
|
||||
ip link add br0 type bridge
|
||||
ip link set ${swp1} master br0
|
||||
ip link set ${swp2} master br0
|
||||
ip link set br0 up
|
||||
sysctl_set net.ipv6.conf.br0.disable_ipv6 1
|
||||
}
|
||||
|
||||
switch_destroy()
|
||||
{
|
||||
sysctl_restore net.ipv6.conf.${swp2}.disable_ipv6
|
||||
sysctl_restore net.ipv6.conf.${swp1}.disable_ipv6
|
||||
|
||||
ip link del br0
|
||||
}
|
||||
|
||||
setup_prepare()
|
||||
{
|
||||
vrf_prepare
|
||||
|
||||
h1_create
|
||||
h2_create
|
||||
switch_create
|
||||
}
|
||||
|
||||
cleanup()
|
||||
{
|
||||
pre_cleanup
|
||||
|
||||
h2_destroy
|
||||
h1_destroy
|
||||
switch_destroy
|
||||
|
||||
vrf_cleanup
|
||||
}
|
||||
|
||||
set_apptrust_order()
|
||||
{
|
||||
local if_name=$1
|
||||
local order=$2
|
||||
|
||||
dcb apptrust set dev ${if_name} order ${order}
|
||||
}
|
||||
|
||||
# Function to extract a specified field from a given JSON stats string
|
||||
extract_network_stat() {
|
||||
local stats_json=$1
|
||||
local field_name=$2
|
||||
|
||||
echo $(echo "$stats_json" | jq -r "$field_name")
|
||||
}
|
||||
|
||||
run_test()
|
||||
{
|
||||
local test_name=$1;
|
||||
local apptrust_order=$2;
|
||||
local port_prio=$3;
|
||||
local dscp_ipv=$4;
|
||||
local dscp=$5;
|
||||
local have_vlan=$6;
|
||||
local pcp_ipv=$7;
|
||||
local vlan_pcp=$8;
|
||||
local ip_v6=$9
|
||||
|
||||
local rx_ipv
|
||||
local tx_ipv
|
||||
|
||||
RET=0
|
||||
|
||||
# Send some packet to populate the switch MAC table
|
||||
$MZ ${h2} -a ${h2_mac} -b ${h1_mac} -p 64 -t icmp echores -c 1
|
||||
|
||||
# Based on the apptrust order, set the expected Internal Priority values
|
||||
# for the RX and TX paths.
|
||||
if [ "${apptrust_order}" == "" ]; then
|
||||
echo "Apptrust order not set."
|
||||
rx_ipv=${port_prio}
|
||||
tx_ipv=${port_prio}
|
||||
elif [ "${apptrust_order}" == "dscp" ]; then
|
||||
echo "Apptrust order is DSCP."
|
||||
rx_ipv=${dscp_ipv}
|
||||
tx_ipv=${dscp_ipv}
|
||||
elif [ "${apptrust_order}" == "pcp" ]; then
|
||||
echo "Apptrust order is PCP."
|
||||
rx_ipv=${pcp_ipv}
|
||||
tx_ipv=${pcp_ipv}
|
||||
elif [ "${apptrust_order}" == "pcp dscp" ]; then
|
||||
echo "Apptrust order is PCP DSCP."
|
||||
if [ ${have_vlan} -eq 1 ]; then
|
||||
rx_ipv=$((dscp_ipv > pcp_ipv ? dscp_ipv : pcp_ipv))
|
||||
tx_ipv=${pcp_ipv}
|
||||
else
|
||||
rx_ipv=${dscp_ipv}
|
||||
tx_ipv=${dscp_ipv}
|
||||
fi
|
||||
else
|
||||
RET=1
|
||||
echo "Error: Unknown apptrust order ${apptrust_order}"
|
||||
log_test "${test_name}"
|
||||
return
|
||||
fi
|
||||
|
||||
# Most/all? of the KSZ switches do not provide per-TC counters. There
|
||||
# are only tx_hi and rx_hi counters, which are used to count packets
|
||||
# which are considered as high priority and most likely not assigned
|
||||
# to the queue 0.
|
||||
# On the ingress path, packets seem to get high priority status
|
||||
# independently of the DSCP or PCP global mapping. On the egress path,
|
||||
# the high priority status is assigned based on the DSCP or PCP global
|
||||
# map configuration.
|
||||
# The thresholds for the high priority status are not documented, but
|
||||
# it seems that the switch considers packets as high priority on the
|
||||
# ingress path if detected Internal Priority is greater than 0. On the
|
||||
# egress path, the switch considers packets as high priority if
|
||||
# detected Internal Priority is greater than 1.
|
||||
if [ ${rx_ipv} -ge 1 ]; then
|
||||
local expect_rx_high_prio=1
|
||||
else
|
||||
local expect_rx_high_prio=0
|
||||
fi
|
||||
|
||||
if [ ${tx_ipv} -ge 2 ]; then
|
||||
local expect_tx_high_prio=1
|
||||
else
|
||||
local expect_tx_high_prio=0
|
||||
fi
|
||||
|
||||
# Use ip tool to get the current switch packet counters. ethool stats
|
||||
# need to be recalculated to get the correct values.
|
||||
local swp1_stats=$(ip -s -j link show dev ${swp1})
|
||||
local swp2_stats=$(ip -s -j link show dev ${swp2})
|
||||
local swp1_rx_packets_before=$(extract_network_stat "$swp1_stats" \
|
||||
'.[0].stats64.rx.packets')
|
||||
local swp1_rx_bytes_before=$(extract_network_stat "$swp1_stats" \
|
||||
'.[0].stats64.rx.bytes')
|
||||
local swp2_tx_packets_before=$(extract_network_stat "$swp2_stats" \
|
||||
'.[0].stats64.tx.packets')
|
||||
local swp2_tx_bytes_before=$(extract_network_stat "$swp2_stats" \
|
||||
'.[0].stats64.tx.bytes')
|
||||
local swp1_rx_hi_before=$(ethtool_stats_get ${swp1} "rx_hi")
|
||||
local swp2_tx_hi_before=$(ethtool_stats_get ${swp2} "tx_hi")
|
||||
|
||||
# Assamble the mausezahn command based on the test parameters
|
||||
# For the testis with ipv4 or ipv6, use icmp response packets,
|
||||
# to avoid interaction with the system, to keep packet counters
|
||||
# clean.
|
||||
if [ ${ip_v6} -eq 0 ]; then
|
||||
local ip="-a ${h1_mac} -b ${h2_mac} -A ${H1_IPV4} \
|
||||
-B ${H2_IPV4} -t icmp unreach,code=1,dscp=${dscp}"
|
||||
else
|
||||
local ip="-6 -a ${h1_mac} -b ${h2_mac} -A ${H1_IPV6} \
|
||||
-B ${H2_IPV6} -t icmp6 type=1,code=0,dscp=${dscp}"
|
||||
fi
|
||||
|
||||
if [ ${have_vlan} -eq 1 ]; then
|
||||
local vlan_pcp_opt="-Q ${vlan_pcp}:0"
|
||||
else
|
||||
local vlan_pcp_opt=""
|
||||
fi
|
||||
$MZ ${h1} ${ip} -c ${PING_COUNT} -d 10msec ${vlan_pcp_opt}
|
||||
|
||||
# Wait until the switch packet counters are updated
|
||||
sleep 6
|
||||
|
||||
local swp1_stats=$(ip -s -j link show dev ${swp1})
|
||||
local swp2_stats=$(ip -s -j link show dev ${swp2})
|
||||
|
||||
local swp1_rx_packets_after=$(extract_network_stat "$swp1_stats" \
|
||||
'.[0].stats64.rx.packets')
|
||||
local swp1_rx_bytes_after=$(extract_network_stat "$swp1_stats" \
|
||||
'.[0].stats64.rx.bytes')
|
||||
local swp2_tx_packets_after=$(extract_network_stat "$swp2_stats" \
|
||||
'.[0].stats64.tx.packets')
|
||||
local swp2_tx_bytes_after=$(extract_network_stat "$swp2_stats" \
|
||||
'.[0].stats64.tx.bytes')
|
||||
|
||||
local swp1_rx_packets_diff=$((${swp1_rx_packets_after} - \
|
||||
${swp1_rx_packets_before}))
|
||||
local swp2_tx_packets_diff=$((${swp2_tx_packets_after} - \
|
||||
${swp2_tx_packets_before}))
|
||||
|
||||
local swp1_rx_hi_after=$(ethtool_stats_get ${swp1} "rx_hi")
|
||||
local swp2_tx_hi_after=$(ethtool_stats_get ${swp2} "tx_hi")
|
||||
|
||||
# Test if any packets were received on swp1, we will rx before and after
|
||||
if [ ${swp1_rx_packets_diff} -lt ${PING_COUNT} ]; then
|
||||
echo "Not expected amount of received packets on ${swp1}"
|
||||
echo "before ${swp1_rx_packets_before} after ${swp1_rx_packets_after}"
|
||||
RET=1
|
||||
fi
|
||||
|
||||
# Test if any packets were transmitted on swp2, we will tx before and after
|
||||
if [ ${swp2_tx_packets_diff} -lt ${PING_COUNT} ]; then
|
||||
echo "Not expected amount of transmitted packets on ${swp2}"
|
||||
echo "before ${swp2_tx_packets_before} after ${swp2_tx_packets_after}"
|
||||
RET=1
|
||||
fi
|
||||
|
||||
# tx/rx_hi counted in bytes. So, we need to compare the difference in bytes
|
||||
local swp1_rx_bytes_diff=$(($swp1_rx_bytes_after - $swp1_rx_bytes_before))
|
||||
local swp2_tx_bytes_diff=$(($swp2_tx_bytes_after - $swp2_tx_bytes_before))
|
||||
local swp1_rx_hi_diff=$(($swp1_rx_hi_after - $swp1_rx_hi_before))
|
||||
local swp2_tx_hi_diff=$(($swp2_tx_hi_after - $swp2_tx_hi_before))
|
||||
|
||||
if [ ${expect_rx_high_prio} -eq 1 ]; then
|
||||
swp1_rx_hi_diff=$((${swp1_rx_hi_diff} - \
|
||||
${swp1_rx_packets_diff} * ${ETH_FCS_LEN}))
|
||||
if [ ${swp1_rx_hi_diff} -ne ${swp1_rx_bytes_diff} ]; then
|
||||
echo "Not expected amount of high priority packets received on ${swp1}"
|
||||
echo "RX hi diff: ${swp1_rx_hi_diff}, expected RX bytes diff: ${swp1_rx_bytes_diff}"
|
||||
RET=1
|
||||
fi
|
||||
else
|
||||
if [ ${swp1_rx_hi_diff} -ne 0 ]; then
|
||||
echo "Unexpected amount of high priority packets received on ${swp1}"
|
||||
echo "RX hi diff: ${swp1_rx_hi_diff}, expected 0"
|
||||
RET=1
|
||||
fi
|
||||
fi
|
||||
|
||||
if [ ${expect_tx_high_prio} -eq 1 ]; then
|
||||
swp2_tx_hi_diff=$((${swp2_tx_hi_diff} - \
|
||||
${swp2_tx_packets_diff} * ${ETH_FCS_LEN}))
|
||||
if [ ${swp2_tx_hi_diff} -ne ${swp2_tx_bytes_diff} ]; then
|
||||
echo "Not expected amount of high priority packets transmitted on ${swp2}"
|
||||
echo "TX hi diff: ${swp2_tx_hi_diff}, expected TX bytes diff: ${swp2_tx_bytes_diff}"
|
||||
RET=1
|
||||
fi
|
||||
else
|
||||
if [ ${swp2_tx_hi_diff} -ne 0 ]; then
|
||||
echo "Unexpected amount of high priority packets transmitted on ${swp2}"
|
||||
echo "TX hi diff: ${swp2_tx_hi_diff}, expected 0"
|
||||
RET=1
|
||||
fi
|
||||
fi
|
||||
|
||||
log_test "${test_name}"
|
||||
}
|
||||
|
||||
run_test_dscp()
|
||||
{
|
||||
# IPv4 test
|
||||
run_test "$1" "$2" "$3" "$4" "$5" 0 0 0 0
|
||||
# IPv6 test
|
||||
run_test "$1" "$2" "$3" "$4" "$5" 0 0 0 1
|
||||
}
|
||||
|
||||
run_test_dscp_pcp()
|
||||
{
|
||||
# IPv4 test
|
||||
run_test "$1" "$2" "$3" "$4" "$5" 1 "$6" "$7" 0
|
||||
# IPv6 test
|
||||
run_test "$1" "$2" "$3" "$4" "$5" 1 "$6" "$7" 1
|
||||
}
|
||||
|
||||
port_default_prio_get()
|
||||
{
|
||||
local if_name=$1
|
||||
local prio
|
||||
|
||||
prio="$(dcb -j app show dev ${if_name} default-prio | \
|
||||
jq '.default_prio[]')"
|
||||
if [ -z "${prio}" ]; then
|
||||
prio=0
|
||||
fi
|
||||
|
||||
echo ${prio}
|
||||
}
|
||||
|
||||
test_port_default()
|
||||
{
|
||||
local orig_apptrust=$(port_get_default_apptrust ${swp1})
|
||||
local orig_prio=$(port_default_prio_get ${swp1})
|
||||
local apptrust_order=""
|
||||
|
||||
RET=0
|
||||
|
||||
# Make sure no other priority sources will interfere with the test
|
||||
set_apptrust_order ${swp1} "${apptrust_order}"
|
||||
|
||||
for val in $(seq 0 7); do
|
||||
dcb app replace dev ${swp1} default-prio ${val}
|
||||
if [ $val -ne $(port_default_prio_get ${swp1}) ]; then
|
||||
RET=1
|
||||
break
|
||||
fi
|
||||
|
||||
run_test_dscp "Port-default QoS classification, prio: ${val}" \
|
||||
"${apptrust_order}" ${val} 0 0
|
||||
done
|
||||
|
||||
set_apptrust_order ${swp1} "${orig_apptrust}"
|
||||
if [[ "$orig_apptrust" != "$(port_get_default_apptrust ${swp1})" ]]; then
|
||||
RET=1
|
||||
fi
|
||||
|
||||
dcb app replace dev ${swp1} default-prio ${orig_prio}
|
||||
if [ $orig_prio -ne $(port_default_prio_get ${swp1}) ]; then
|
||||
RET=1
|
||||
fi
|
||||
|
||||
log_test "Port-default QoS classification"
|
||||
}
|
||||
|
||||
port_get_default_apptrust()
|
||||
{
|
||||
local if_name=$1
|
||||
|
||||
dcb -j apptrust show dev ${if_name} | jq -r '.order[]' | \
|
||||
tr '\n' ' ' | xargs
|
||||
}
|
||||
|
||||
test_port_apptrust()
|
||||
{
|
||||
local original_dscp_prios_swp1=$(get_dscp_prios ${swp1})
|
||||
local orig_apptrust=$(port_get_default_apptrust ${swp1})
|
||||
local orig_port_prio=$(port_default_prio_get ${swp1})
|
||||
local order_variants=("pcp dscp" "dscp" "pcp")
|
||||
local apptrust_order
|
||||
local port_prio
|
||||
local dscp_prio
|
||||
local pcp_prio
|
||||
local dscp
|
||||
local pcp
|
||||
|
||||
RET=0
|
||||
|
||||
# First, test if apptrust configuration as taken by the kernel
|
||||
for order in "${order_variants[@]}"; do
|
||||
set_apptrust_order ${swp1} "${order}"
|
||||
if [[ "$order" != "$(port_get_default_apptrust ${swp1})" ]]; then
|
||||
RET=1
|
||||
break
|
||||
fi
|
||||
done
|
||||
|
||||
log_test "Apptrust, supported variants"
|
||||
|
||||
# To test if the apptrust configuration is working as expected, we need
|
||||
# to set DSCP priorities for the switch port.
|
||||
init_dscp_prios "${swp1}" "${original_dscp_prios_swp1}"
|
||||
|
||||
# Start with a simple test where all apptrust sources are disabled
|
||||
# default port priority is 0, DSCP priority is mapped to 7.
|
||||
# No high priority packets should be received or transmitted.
|
||||
port_prio=0
|
||||
dscp_prio=7
|
||||
dscp=4
|
||||
|
||||
dcb app replace dev ${swp1} default-prio ${port_prio}
|
||||
dcb app replace dev ${swp1} dscp-prio ${dscp}:${dscp_prio}
|
||||
|
||||
apptrust_order=""
|
||||
set_apptrust_order ${swp1} "${apptrust_order}"
|
||||
# Test with apptrust sources disabled, Packets should get port default
|
||||
# priority which is 0
|
||||
run_test_dscp "Apptrust, all disabled. DSCP-prio ${dscp}:${dscp_prio}" \
|
||||
"${apptrust_order}" ${port_prio} ${dscp_prio} ${dscp}
|
||||
|
||||
apptrust_order="pcp"
|
||||
set_apptrust_order ${swp1} "${apptrust_order}"
|
||||
# If PCP is enabled, packets should get PCP priority, which is not
|
||||
# set in this test (no VLAN tags are present in the packet). No high
|
||||
# priority packets should be received or transmitted.
|
||||
run_test_dscp "Apptrust, PCP enabled. DSCP-prio ${dscp}:${dscp_prio}" \
|
||||
"${apptrust_order}" ${port_prio} ${dscp_prio} ${dscp}
|
||||
|
||||
apptrust_order="dscp"
|
||||
set_apptrust_order ${swp1} "${apptrust_order}"
|
||||
# If DSCP is enabled, packets should get DSCP priority which is set to 7
|
||||
# in this test. High priority packets should be received and transmitted.
|
||||
run_test_dscp "Apptrust, DSCP enabled. DSCP-prio ${dscp}:${dscp_prio}" \
|
||||
"${apptrust_order}" ${port_prio} ${dscp_prio} ${dscp}
|
||||
|
||||
apptrust_order="pcp dscp"
|
||||
set_apptrust_order ${swp1} "${apptrust_order}"
|
||||
# If PCP and DSCP are enabled, PCP would have higher apptrust priority
|
||||
# so packets should get PCP priority. But in this test VLAN PCP is not
|
||||
# set, so it should get DSCP priority which is set to 7. High priority
|
||||
# packets should be received and transmitted.
|
||||
run_test_dscp "Apptrust, PCP and DSCP are enabled. DSCP-prio ${dscp}:${dscp_prio}" \
|
||||
"${apptrust_order}" ${port_prio} ${dscp_prio} ${dscp}
|
||||
|
||||
# If VLAN PCP is set, it should have higher apptrust priority than DSCP
|
||||
# so packets should get VLAN PCP priority. Send packets with VLAN PCP
|
||||
# set to 0, DSCP set to 7. Packets should get VLAN PCP priority.
|
||||
# No high priority packets should be transmitted. Due to nature of the
|
||||
# switch, high priority packets will be received.
|
||||
pcp_prio=0
|
||||
pcp=0
|
||||
run_test_dscp_pcp "Apptrust, PCP and DSCP are enabled. PCP ${pcp_prio}, DSCP-prio ${dscp}:${dscp_prio}" \
|
||||
"${apptrust_order}" ${port_prio} ${dscp_prio} ${dscp} ${pcp_prio} ${pcp}
|
||||
|
||||
# If VLAN PCP is set to 7, it should have higher apptrust priority than
|
||||
# DSCP so packets should get VLAN PCP priority. Send packets with VLAN
|
||||
# PCP set to 7, DSCP set to 7. Packets should get VLAN PCP priority.
|
||||
# High priority packets should be received and transmitted.
|
||||
pcp_prio=7
|
||||
pcp=7
|
||||
run_test_dscp_pcp "Apptrust, PCP and DSCP are enabled. PCP ${pcp_prio}, DSCP-prio ${dscp}:${dscp_prio}" \
|
||||
"${apptrust_order}" ${port_prio} ${dscp_prio} ${dscp} ${pcp_prio} ${pcp}
|
||||
# Now make sure that the switch is able to handle the case where DSCP
|
||||
# priority is set to 0 and PCP priority is set to 7. Packets should get
|
||||
# PCP priority. High priority packets should be received and transmitted.
|
||||
dscp_prio=0
|
||||
dcb app replace dev ${swp1} dscp-prio ${dscp}:${dscp_prio}
|
||||
run_test_dscp_pcp "Apptrust, PCP and DSCP are enabled. PCP ${pcp_prio}, DSCP-prio ${dscp}:${dscp_prio}" \
|
||||
"${apptrust_order}" ${port_prio} ${dscp_prio} ${dscp} ${pcp_prio} ${pcp}
|
||||
# If both VLAN PCP and DSCP are set to 0, packets should get 0 priority.
|
||||
# No high priority packets should be received or transmitted.
|
||||
pcp_prio=0
|
||||
pcp=0
|
||||
run_test_dscp_pcp "Apptrust, PCP and DSCP are enabled. PCP ${pcp_prio}, DSCP-prio ${dscp}:${dscp_prio}" \
|
||||
"${apptrust_order}" ${port_prio} ${dscp_prio} ${dscp} ${pcp_prio} ${pcp}
|
||||
|
||||
# Restore original priorities
|
||||
if ! restore_priorities "${swp1}" "${original_dscp_prios_swp1}"; then
|
||||
RET=1
|
||||
fi
|
||||
|
||||
set_apptrust_order ${swp1} "${orig_apptrust}"
|
||||
if [ "$orig_apptrust" != "$(port_get_default_apptrust ${swp1})" ]; then
|
||||
RET=1
|
||||
fi
|
||||
|
||||
dcb app replace dev ${swp1} default-prio ${orig_port_prio}
|
||||
if [ $orig_port_prio -ne $(port_default_prio_get ${swp1}) ]; then
|
||||
RET=1
|
||||
fi
|
||||
|
||||
log_test "Apptrust, restore original settings"
|
||||
}
|
||||
|
||||
# Function to get current DSCP priorities
|
||||
get_dscp_prios() {
|
||||
local if_name=$1
|
||||
dcb -j app show dev ${if_name} | jq -c '.dscp_prio'
|
||||
}
|
||||
|
||||
# Function to set a specific DSCP priority on a device
|
||||
replace_dscp_prio() {
|
||||
local if_name=$1
|
||||
local dscp=$2
|
||||
local prio=$3
|
||||
dcb app replace dev ${if_name} dscp-prio ${dscp}:${prio}
|
||||
}
|
||||
|
||||
# Function to compare DSCP maps
|
||||
compare_dscp_maps() {
|
||||
local old_json=$1
|
||||
local new_json=$2
|
||||
local dscp=$3
|
||||
local prio=$4
|
||||
|
||||
# Create a modified old_json with the expected change for comparison
|
||||
local modified_old_json=$(echo "$old_json" |
|
||||
jq --argjson dscp $dscp --argjson prio $prio \
|
||||
'map(if .[0] == $dscp then [$dscp, $prio] else . end)' |
|
||||
tr -d " \n")
|
||||
|
||||
# Compare new_json with the modified_old_json
|
||||
if [[ "$modified_old_json" == "$new_json" ]]; then
|
||||
return 0
|
||||
else
|
||||
return 1
|
||||
fi
|
||||
}
|
||||
|
||||
# Function to set DSCP priorities
|
||||
set_and_verify_dscp() {
|
||||
local port=$1
|
||||
local dscp=$2
|
||||
local new_prio=$3
|
||||
|
||||
local old_prios=$(get_dscp_prios $port)
|
||||
|
||||
replace_dscp_prio "$port" $dscp $new_prio
|
||||
|
||||
# Fetch current settings and compare
|
||||
local current_prios=$(get_dscp_prios $port)
|
||||
if ! compare_dscp_maps "$old_prios" "$current_prios" $dscp $new_prio; then
|
||||
echo "Error: Unintended changes detected in DSCP map for $port after setting DSCP $dscp to $new_prio."
|
||||
return 1
|
||||
fi
|
||||
return 0
|
||||
}
|
||||
|
||||
# Function to restore original priorities
|
||||
restore_priorities() {
|
||||
local port=$1
|
||||
local original_prios=$2
|
||||
|
||||
echo "Removing test artifacts for $port"
|
||||
local current_prios=$(get_dscp_prios $port)
|
||||
local prio_str=$(echo "$current_prios" |
|
||||
jq -r 'map("\(.[0]):\(.[1])") | join(" ")')
|
||||
dcb app del dev $port dscp-prio $prio_str
|
||||
|
||||
echo "Restoring original DSCP priorities for $port"
|
||||
local restore_str=$(echo "$original_prios" |
|
||||
jq -r 'map("\(.[0]):\(.[1])") | join(" ")')
|
||||
dcb app add dev $port dscp-prio $restore_str
|
||||
|
||||
local current_prios=$(get_dscp_prios $port)
|
||||
if [[ "$original_prios" != "$current_prios" ]]; then
|
||||
echo "Error: Failed to restore original DSCP priorities for $port"
|
||||
return 1
|
||||
fi
|
||||
return 0
|
||||
}
|
||||
|
||||
# Initialize DSCP priorities. Set them to predictable values for testing.
|
||||
init_dscp_prios() {
|
||||
local port=$1
|
||||
local original_prios=$2
|
||||
|
||||
echo "Removing any existing DSCP priority mappins for $port"
|
||||
local prio_str=$(echo "$original_prios" |
|
||||
jq -r 'map("\(.[0]):\(.[1])") | join(" ")')
|
||||
dcb app del dev $port dscp-prio $prio_str
|
||||
|
||||
# Initialize DSCP priorities list
|
||||
local dscp_prios=""
|
||||
for dscp in {0..63}; do
|
||||
dscp_prios+=("$dscp:0")
|
||||
done
|
||||
|
||||
echo "Setting initial DSCP priorities map to 0 for $port"
|
||||
dcb app add dev $port dscp-prio ${dscp_prios[@]}
|
||||
}
|
||||
|
||||
# Main function to test global DSCP map across specified ports
|
||||
test_global_dscp_map() {
|
||||
local ports=("$swp1" "$swp2")
|
||||
local original_dscp_prios_port0=$(get_dscp_prios ${ports[0]})
|
||||
local orig_apptrust=$(port_get_default_apptrust ${swp1})
|
||||
local orig_port_prio=$(port_default_prio_get ${swp1})
|
||||
local apptrust_order="dscp"
|
||||
local port_prio=0
|
||||
local dscp_prio
|
||||
local dscp
|
||||
|
||||
RET=0
|
||||
|
||||
set_apptrust_order ${swp1} "${apptrust_order}"
|
||||
dcb app replace dev ${swp1} default-prio ${port_prio}
|
||||
|
||||
# Initialize DSCP priorities
|
||||
init_dscp_prios "${ports[0]}" "$original_dscp_prios_port0"
|
||||
|
||||
# Loop over each DSCP index
|
||||
for dscp in {0..63}; do
|
||||
# and test each Internal Priority value
|
||||
for dscp_prio in {0..7}; do
|
||||
# do it for each port. This is to test if the global DSCP map
|
||||
# is accessible from all ports.
|
||||
for port in "${ports[@]}"; do
|
||||
if ! set_and_verify_dscp "$port" $dscp $dscp_prio; then
|
||||
RET=1
|
||||
fi
|
||||
done
|
||||
|
||||
# Test if the DSCP priority is correctly applied to the packets
|
||||
run_test_dscp "DSCP (${dscp}) QoS classification, prio: ${dscp_prio}" \
|
||||
"${apptrust_order}" ${port_prio} ${dscp_prio} ${dscp}
|
||||
if [ ${RET} -eq 1 ]; then
|
||||
break
|
||||
fi
|
||||
done
|
||||
done
|
||||
|
||||
# Restore original priorities
|
||||
if ! restore_priorities "${ports[0]}" "${original_dscp_prios_port0}"; then
|
||||
RET=1
|
||||
fi
|
||||
|
||||
set_apptrust_order ${swp1} "${orig_apptrust}"
|
||||
if [[ "$orig_apptrust" != "$(port_get_default_apptrust ${swp1})" ]]; then
|
||||
RET=1
|
||||
fi
|
||||
|
||||
dcb app replace dev ${swp1} default-prio ${orig_port_prio}
|
||||
if [ $orig_port_prio -ne $(port_default_prio_get ${swp1}) ]; then
|
||||
RET=1
|
||||
fi
|
||||
|
||||
log_test "DSCP global map"
|
||||
}
|
||||
|
||||
trap cleanup EXIT
|
||||
|
||||
ALL_TESTS="
|
||||
test_port_default
|
||||
test_port_apptrust
|
||||
test_global_dscp_map
|
||||
"
|
||||
|
||||
setup_prepare
|
||||
setup_wait
|
||||
tests_run
|
||||
|
||||
exit $EXIT_STATUS
|
||||
Loading…
x
Reference in New Issue
Block a user