diff --git a/arch/arm/boot/dts/omap5-l4.dtsi b/arch/arm/boot/dts/omap5-l4.dtsi index 4fad290b5819..32f01986bc3e 100644 --- a/arch/arm/boot/dts/omap5-l4.dtsi +++ b/arch/arm/boot/dts/omap5-l4.dtsi @@ -268,7 +268,6 @@ target-module@62000 { /* 0x4a062000, ap 11 0e.0 */ compatible = "ti,sysc-omap2", "ti,sysc"; - ti,hwmods = "usb_tll_hs"; reg = <0x62000 0x4>, <0x62010 0x4>, <0x62014 0x4>; @@ -297,7 +296,6 @@ target-module@64000 { /* 0x4a064000, ap 71 1e.0 */ compatible = "ti,sysc-omap4", "ti,sysc"; - ti,hwmods = "usb_host_hs"; reg = <0x64000 0x4>, <0x64010 0x4>; reg-names = "rev", "sysc"; diff --git a/arch/arm/mach-omap2/omap_hwmod_54xx_data.c b/arch/arm/mach-omap2/omap_hwmod_54xx_data.c index 4bb2503cf44a..7c38c1ba58ac 100644 --- a/arch/arm/mach-omap2/omap_hwmod_54xx_data.c +++ b/arch/arm/mach-omap2/omap_hwmod_54xx_data.c @@ -266,115 +266,6 @@ static struct omap_hwmod omap54xx_mpu_hwmod = { }, }; -/* - * 'usb_host_hs' class - * high-speed multi-port usb host controller - */ - -static struct omap_hwmod_class_sysconfig omap54xx_usb_host_hs_sysc = { - .rev_offs = 0x0000, - .sysc_offs = 0x0010, - .sysc_flags = (SYSC_HAS_MIDLEMODE | SYSC_HAS_RESET_STATUS | - SYSC_HAS_SIDLEMODE | SYSC_HAS_SOFTRESET), - .idlemodes = (SIDLE_FORCE | SIDLE_NO | SIDLE_SMART | - SIDLE_SMART_WKUP | MSTANDBY_FORCE | MSTANDBY_NO | - MSTANDBY_SMART | MSTANDBY_SMART_WKUP), - .sysc_fields = &omap_hwmod_sysc_type2, -}; - -static struct omap_hwmod_class omap54xx_usb_host_hs_hwmod_class = { - .name = "usb_host_hs", - .sysc = &omap54xx_usb_host_hs_sysc, -}; - -static struct omap_hwmod omap54xx_usb_host_hs_hwmod = { - .name = "usb_host_hs", - .class = &omap54xx_usb_host_hs_hwmod_class, - .clkdm_name = "l3init_clkdm", - /* - * Errata: USBHOST Configured In Smart-Idle Can Lead To a Deadlock - * id: i660 - * - * Description: - * In the following configuration : - * - USBHOST module is set to smart-idle mode - * - PRCM asserts idle_req to the USBHOST module ( This typically - * happens when the system is going to a low power mode : all ports - * have been suspended, the master part of the USBHOST module has - * entered the standby state, and SW has cut the functional clocks) - * - an USBHOST interrupt occurs before the module is able to answer - * idle_ack, typically a remote wakeup IRQ. - * Then the USB HOST module will enter a deadlock situation where it - * is no more accessible nor functional. - * - * Workaround: - * Don't use smart idle; use only force idle, hence HWMOD_SWSUP_SIDLE - */ - - /* - * Errata: USB host EHCI may stall when entering smart-standby mode - * Id: i571 - * - * Description: - * When the USBHOST module is set to smart-standby mode, and when it is - * ready to enter the standby state (i.e. all ports are suspended and - * all attached devices are in suspend mode), then it can wrongly assert - * the Mstandby signal too early while there are still some residual OCP - * transactions ongoing. If this condition occurs, the internal state - * machine may go to an undefined state and the USB link may be stuck - * upon the next resume. - * - * Workaround: - * Don't use smart standby; use only force standby, - * hence HWMOD_SWSUP_MSTANDBY - */ - - .flags = HWMOD_SWSUP_SIDLE | HWMOD_SWSUP_MSTANDBY, - .main_clk = "l3init_60m_fclk", - .prcm = { - .omap4 = { - .clkctrl_offs = OMAP54XX_CM_L3INIT_USB_HOST_HS_CLKCTRL_OFFSET, - .context_offs = OMAP54XX_RM_L3INIT_USB_HOST_HS_CONTEXT_OFFSET, - .modulemode = MODULEMODE_SWCTRL, - }, - }, -}; - -/* - * 'usb_tll_hs' class - * usb_tll_hs module is the adapter on the usb_host_hs ports - */ - -static struct omap_hwmod_class_sysconfig omap54xx_usb_tll_hs_sysc = { - .rev_offs = 0x0000, - .sysc_offs = 0x0010, - .syss_offs = 0x0014, - .sysc_flags = (SYSC_HAS_AUTOIDLE | SYSC_HAS_CLOCKACTIVITY | - SYSC_HAS_ENAWAKEUP | SYSC_HAS_SIDLEMODE | - SYSC_HAS_SOFTRESET | SYSS_HAS_RESET_STATUS), - .idlemodes = (SIDLE_FORCE | SIDLE_NO | SIDLE_SMART), - .sysc_fields = &omap_hwmod_sysc_type1, -}; - -static struct omap_hwmod_class omap54xx_usb_tll_hs_hwmod_class = { - .name = "usb_tll_hs", - .sysc = &omap54xx_usb_tll_hs_sysc, -}; - -static struct omap_hwmod omap54xx_usb_tll_hs_hwmod = { - .name = "usb_tll_hs", - .class = &omap54xx_usb_tll_hs_hwmod_class, - .clkdm_name = "l3init_clkdm", - .main_clk = "l4_root_clk_div", - .prcm = { - .omap4 = { - .clkctrl_offs = OMAP54XX_CM_L3INIT_USB_TLL_HS_CLKCTRL_OFFSET, - .context_offs = OMAP54XX_RM_L3INIT_USB_TLL_HS_CONTEXT_OFFSET, - .modulemode = MODULEMODE_HWCTRL, - }, - }, -}; - /* * 'sata' class * sata: serial ata interface gen2 compliant ( 1 rx/ 1 tx) @@ -576,22 +467,6 @@ static struct omap_hwmod_ocp_if omap54xx_l4_cfg__mpu = { .user = OCP_USER_MPU | OCP_USER_SDMA, }; -/* l4_cfg -> usb_host_hs */ -static struct omap_hwmod_ocp_if omap54xx_l4_cfg__usb_host_hs = { - .master = &omap54xx_l4_cfg_hwmod, - .slave = &omap54xx_usb_host_hs_hwmod, - .clk = "l3_iclk_div", - .user = OCP_USER_MPU | OCP_USER_SDMA, -}; - -/* l4_cfg -> usb_tll_hs */ -static struct omap_hwmod_ocp_if omap54xx_l4_cfg__usb_tll_hs = { - .master = &omap54xx_l4_cfg_hwmod, - .slave = &omap54xx_usb_tll_hs_hwmod, - .clk = "l4_root_clk_div", - .user = OCP_USER_MPU | OCP_USER_SDMA, -}; - static struct omap_hwmod_ocp_if *omap54xx_hwmod_ocp_ifs[] __initdata = { &omap54xx_l3_main_1__dmm, &omap54xx_l3_main_3__l3_instr, @@ -612,8 +487,6 @@ static struct omap_hwmod_ocp_if *omap54xx_hwmod_ocp_ifs[] __initdata = { &omap54xx_mpu__emif1, &omap54xx_mpu__emif2, &omap54xx_l4_cfg__mpu, - &omap54xx_l4_cfg__usb_host_hs, - &omap54xx_l4_cfg__usb_tll_hs, &omap54xx_l4_cfg__sata, NULL, };