diff --git a/Documentation/00-INDEX b/Documentation/00-INDEX index 6de71308a906..5b5aba404aac 100644 --- a/Documentation/00-INDEX +++ b/Documentation/00-INDEX @@ -89,8 +89,6 @@ cciss.txt - info, major/minor #'s for Compaq's SMART Array Controllers. cdrom/ - directory with information on the CD-ROM drivers that Linux has. -cli-sti-removal.txt - - cli()/sti() removal guide. computone.txt - info on Computone Intelliport II/Plus Multiport Serial Driver. connector/ diff --git a/Documentation/ABI/testing/sysfs-class-regulator b/Documentation/ABI/testing/sysfs-class-regulator new file mode 100644 index 000000000000..79a4a75b2d2c --- /dev/null +++ b/Documentation/ABI/testing/sysfs-class-regulator @@ -0,0 +1,315 @@ +What: /sys/class/regulator/.../state +Date: April 2008 +KernelVersion: 2.6.26 +Contact: Liam Girdwood +Description: + Each regulator directory will contain a field called + state. This holds the regulator output state. + + This will be one of the following strings: + + 'enabled' + 'disabled' + 'unknown' + + 'enabled' means the regulator output is ON and is supplying + power to the system. + + 'disabled' means the regulator output is OFF and is not + supplying power to the system.. + + 'unknown' means software cannot determine the state. + + NOTE: this field can be used in conjunction with microvolts + and microamps to determine regulator output levels. + + +What: /sys/class/regulator/.../type +Date: April 2008 +KernelVersion: 2.6.26 +Contact: Liam Girdwood +Description: + Each regulator directory will contain a field called + type. This holds the regulator type. + + This will be one of the following strings: + + 'voltage' + 'current' + 'unknown' + + 'voltage' means the regulator output voltage can be controlled + by software. + + 'current' means the regulator output current limit can be + controlled by software. + + 'unknown' means software cannot control either voltage or + current limit. + + +What: /sys/class/regulator/.../microvolts +Date: April 2008 +KernelVersion: 2.6.26 +Contact: Liam Girdwood +Description: + Each regulator directory will contain a field called + microvolts. This holds the regulator output voltage setting + measured in microvolts (i.e. E-6 Volts). + + NOTE: This value should not be used to determine the regulator + output voltage level as this value is the same regardless of + whether the regulator is enabled or disabled. + + +What: /sys/class/regulator/.../microamps +Date: April 2008 +KernelVersion: 2.6.26 +Contact: Liam Girdwood +Description: + Each regulator directory will contain a field called + microamps. This holds the regulator output current limit + setting measured in microamps (i.e. E-6 Amps). + + NOTE: This value should not be used to determine the regulator + output current level as this value is the same regardless of + whether the regulator is enabled or disabled. + + +What: /sys/class/regulator/.../opmode +Date: April 2008 +KernelVersion: 2.6.26 +Contact: Liam Girdwood +Description: + Each regulator directory will contain a field called + opmode. This holds the regulator operating mode setting. + + The opmode value can be one of the following strings: + + 'fast' + 'normal' + 'idle' + 'standby' + 'unknown' + + The modes are described in include/linux/regulator/regulator.h + + NOTE: This value should not be used to determine the regulator + output operating mode as this value is the same regardless of + whether the regulator is enabled or disabled. + + +What: /sys/class/regulator/.../min_microvolts +Date: April 2008 +KernelVersion: 2.6.26 +Contact: Liam Girdwood +Description: + Each regulator directory will contain a field called + min_microvolts. This holds the minimum safe working regulator + output voltage setting for this domain measured in microvolts. + + NOTE: this will return the string 'constraint not defined' if + the power domain has no min microvolts constraint defined by + platform code. + + +What: /sys/class/regulator/.../max_microvolts +Date: April 2008 +KernelVersion: 2.6.26 +Contact: Liam Girdwood +Description: + Each regulator directory will contain a field called + max_microvolts. This holds the maximum safe working regulator + output voltage setting for this domain measured in microvolts. + + NOTE: this will return the string 'constraint not defined' if + the power domain has no max microvolts constraint defined by + platform code. + + +What: /sys/class/regulator/.../min_microamps +Date: April 2008 +KernelVersion: 2.6.26 +Contact: Liam Girdwood +Description: + Each regulator directory will contain a field called + min_microamps. This holds the minimum safe working regulator + output current limit setting for this domain measured in + microamps. + + NOTE: this will return the string 'constraint not defined' if + the power domain has no min microamps constraint defined by + platform code. + + +What: /sys/class/regulator/.../max_microamps +Date: April 2008 +KernelVersion: 2.6.26 +Contact: Liam Girdwood +Description: + Each regulator directory will contain a field called + max_microamps. This holds the maximum safe working regulator + output current limit setting for this domain measured in + microamps. + + NOTE: this will return the string 'constraint not defined' if + the power domain has no max microamps constraint defined by + platform code. + + +What: /sys/class/regulator/.../num_users +Date: April 2008 +KernelVersion: 2.6.26 +Contact: Liam Girdwood +Description: + Each regulator directory will contain a field called + num_users. This holds the number of consumer devices that + have called regulator_enable() on this regulator. + + +What: /sys/class/regulator/.../requested_microamps +Date: April 2008 +KernelVersion: 2.6.26 +Contact: Liam Girdwood +Description: + Each regulator directory will contain a field called + requested_microamps. This holds the total requested load + current in microamps for this regulator from all its consumer + devices. + + +What: /sys/class/regulator/.../parent +Date: April 2008 +KernelVersion: 2.6.26 +Contact: Liam Girdwood +Description: + Some regulator directories will contain a link called parent. + This points to the parent or supply regulator if one exists. + +What: /sys/class/regulator/.../suspend_mem_microvolts +Date: May 2008 +KernelVersion: 2.6.26 +Contact: Liam Girdwood +Description: + Each regulator directory will contain a field called + suspend_mem_microvolts. This holds the regulator output + voltage setting for this domain measured in microvolts when + the system is suspended to memory. + + NOTE: this will return the string 'not defined' if + the power domain has no suspend to memory voltage defined by + platform code. + +What: /sys/class/regulator/.../suspend_disk_microvolts +Date: May 2008 +KernelVersion: 2.6.26 +Contact: Liam Girdwood +Description: + Each regulator directory will contain a field called + suspend_disk_microvolts. This holds the regulator output + voltage setting for this domain measured in microvolts when + the system is suspended to disk. + + NOTE: this will return the string 'not defined' if + the power domain has no suspend to disk voltage defined by + platform code. + +What: /sys/class/regulator/.../suspend_standby_microvolts +Date: May 2008 +KernelVersion: 2.6.26 +Contact: Liam Girdwood +Description: + Each regulator directory will contain a field called + suspend_standby_microvolts. This holds the regulator output + voltage setting for this domain measured in microvolts when + the system is suspended to standby. + + NOTE: this will return the string 'not defined' if + the power domain has no suspend to standby voltage defined by + platform code. + +What: /sys/class/regulator/.../suspend_mem_mode +Date: May 2008 +KernelVersion: 2.6.26 +Contact: Liam Girdwood +Description: + Each regulator directory will contain a field called + suspend_mem_mode. This holds the regulator operating mode + setting for this domain when the system is suspended to + memory. + + NOTE: this will return the string 'not defined' if + the power domain has no suspend to memory mode defined by + platform code. + +What: /sys/class/regulator/.../suspend_disk_mode +Date: May 2008 +KernelVersion: 2.6.26 +Contact: Liam Girdwood +Description: + Each regulator directory will contain a field called + suspend_disk_mode. This holds the regulator operating mode + setting for this domain when the system is suspended to disk. + + NOTE: this will return the string 'not defined' if + the power domain has no suspend to disk mode defined by + platform code. + +What: /sys/class/regulator/.../suspend_standby_mode +Date: May 2008 +KernelVersion: 2.6.26 +Contact: Liam Girdwood +Description: + Each regulator directory will contain a field called + suspend_standby_mode. This holds the regulator operating mode + setting for this domain when the system is suspended to + standby. + + NOTE: this will return the string 'not defined' if + the power domain has no suspend to standby mode defined by + platform code. + +What: /sys/class/regulator/.../suspend_mem_state +Date: May 2008 +KernelVersion: 2.6.26 +Contact: Liam Girdwood +Description: + Each regulator directory will contain a field called + suspend_mem_state. This holds the regulator operating state + when suspended to memory. + + This will be one of the following strings: + + 'enabled' + 'disabled' + 'not defined' + +What: /sys/class/regulator/.../suspend_disk_state +Date: May 2008 +KernelVersion: 2.6.26 +Contact: Liam Girdwood +Description: + Each regulator directory will contain a field called + suspend_disk_state. This holds the regulator operating state + when suspended to disk. + + This will be one of the following strings: + + 'enabled' + 'disabled' + 'not defined' + +What: /sys/class/regulator/.../suspend_standby_state +Date: May 2008 +KernelVersion: 2.6.26 +Contact: Liam Girdwood +Description: + Each regulator directory will contain a field called + suspend_standby_state. This holds the regulator operating + state when suspended to standby. + + This will be one of the following strings: + + 'enabled' + 'disabled' + 'not defined' diff --git a/Documentation/DocBook/Makefile b/Documentation/DocBook/Makefile index 0eb0d027eb32..1d1b34500b69 100644 --- a/Documentation/DocBook/Makefile +++ b/Documentation/DocBook/Makefile @@ -12,7 +12,7 @@ DOCBOOKS := wanbook.xml z8530book.xml mcabook.xml videobook.xml \ kernel-api.xml filesystems.xml lsm.xml usb.xml kgdb.xml \ gadget.xml libata.xml mtdnand.xml librs.xml rapidio.xml \ genericirq.xml s390-drivers.xml uio-howto.xml scsi.xml \ - mac80211.xml debugobjects.xml + mac80211.xml debugobjects.xml sh.xml ### # The build process is as follows (targets): diff --git a/Documentation/DocBook/kgdb.tmpl b/Documentation/DocBook/kgdb.tmpl index e8acd1f03456..372dec20c8da 100644 --- a/Documentation/DocBook/kgdb.tmpl +++ b/Documentation/DocBook/kgdb.tmpl @@ -98,6 +98,24 @@ "Kernel debugging" select "KGDB: kernel debugging with remote gdb". + It is advised, but not required that you turn on the + CONFIG_FRAME_POINTER kernel option. This option inserts code to + into the compiled executable which saves the frame information in + registers or on the stack at different points which will allow a + debugger such as gdb to more accurately construct stack back traces + while debugging the kernel. + + + If the architecture that you are using supports the kernel option + CONFIG_DEBUG_RODATA, you should consider turning it off. This + option will prevent the use of software breakpoints because it + marks certain regions of the kernel's memory space as read-only. + If kgdb supports it for the architecture you are using, you can + use hardware breakpoints if you desire to run with the + CONFIG_DEBUG_RODATA option turned on, else you need to turn off + this option. + + Next you should choose one of more I/O drivers to interconnect debugging host and debugged target. Early boot debugging requires a KGDB I/O driver that supports early debugging and the driver must be diff --git a/Documentation/DocBook/s390-drivers.tmpl b/Documentation/DocBook/s390-drivers.tmpl index 4acc73240a6d..95bfc12e5439 100644 --- a/Documentation/DocBook/s390-drivers.tmpl +++ b/Documentation/DocBook/s390-drivers.tmpl @@ -100,7 +100,7 @@ the hardware structures represented here, please consult the Principles of Operation. -!Iinclude/asm-s390/cio.h +!Iarch/s390/include/asm/cio.h ccw devices @@ -114,7 +114,7 @@ ccw device structure. Device drivers must not bypass those functions or strange side effects may happen. -!Iinclude/asm-s390/ccwdev.h +!Iarch/s390/include/asm/ccwdev.h !Edrivers/s390/cio/device.c !Edrivers/s390/cio/device_ops.c @@ -125,7 +125,7 @@ measurement data which is made available by the channel subsystem for each channel attached device. -!Iinclude/asm-s390/cmb.h +!Iarch/s390/include/asm/cmb.h !Edrivers/s390/cio/cmf.c @@ -142,7 +142,7 @@ ccw group devices -!Iinclude/asm-s390/ccwgroup.h +!Iarch/s390/include/asm/ccwgroup.h !Edrivers/s390/cio/ccwgroup.c diff --git a/Documentation/DocBook/sh.tmpl b/Documentation/DocBook/sh.tmpl new file mode 100644 index 000000000000..0c3dc4c69dd1 --- /dev/null +++ b/Documentation/DocBook/sh.tmpl @@ -0,0 +1,105 @@ + + + + + + SuperH Interfaces Guide + + + + Paul + Mundt + +
+ lethal@linux-sh.org +
+ + + + + + 2008 + Paul Mundt + + + 2008 + Renesas Technology Corp. + + + + + This documentation is free software; you can redistribute + it and/or modify it under the terms of the GNU General Public + License version 2 as published by the Free Software Foundation. + + + + This program is distributed in the hope that it will be + useful, but WITHOUT ANY WARRANTY; without even the implied + warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. + See the GNU General Public License for more details. + + + + You should have received a copy of the GNU General Public + License along with this program; if not, write to the Free + Software Foundation, Inc., 59 Temple Place, Suite 330, Boston, + MA 02111-1307 USA + + + + For more details see the file COPYING in the source + distribution of Linux. + + + + + + + + Memory Management + + SH-4 + + Store Queue API +!Earch/sh/kernel/cpu/sh4/sq.c + + + + SH-5 + + TLB Interfaces +!Iarch/sh/mm/tlb-sh5.c +!Iarch/sh/include/asm/tlb_64.h + + + + + Clock Framework Extensions +!Iarch/sh/include/asm/clock.h + + + Machine Specific Interfaces + + mach-dreamcast +!Iarch/sh/boards/mach-dreamcast/rtc.c + + + mach-x3proto +!Earch/sh/boards/mach-x3proto/ilsel.c + + + + Busses + + SuperHyway +!Edrivers/sh/superhyway/superhyway.c + + + + Maple +!Edrivers/sh/maple/maple.c + + + diff --git a/Documentation/DocBook/videobook.tmpl b/Documentation/DocBook/videobook.tmpl index 89817795e668..0bc25949b668 100644 --- a/Documentation/DocBook/videobook.tmpl +++ b/Documentation/DocBook/videobook.tmpl @@ -1648,7 +1648,7 @@ static struct video_buffer capture_fb; Public Functions Provided -!Edrivers/media/video/videodev.c +!Edrivers/media/video/v4l2-dev.c diff --git a/Documentation/DocBook/z8530book.tmpl b/Documentation/DocBook/z8530book.tmpl index 42c75ba71ba2..a42a8a4c7689 100644 --- a/Documentation/DocBook/z8530book.tmpl +++ b/Documentation/DocBook/z8530book.tmpl @@ -69,12 +69,6 @@ device to be used as both a tty interface and as a synchronous controller is a project for Linux post the 2.4 release - - The support code handles most common card configurations and - supports running both Cisco HDLC and Synchronous PPP. With extra - glue the frame relay and X.25 protocols can also be used with this - driver. - @@ -179,35 +173,27 @@ If you wish to use the network interface facilities of the driver, then you need to attach a network device to each channel that is - present and in use. In addition to use the SyncPPP and Cisco HDLC + present and in use. In addition to use the generic HDLC you need to follow some additional plumbing rules. They may seem complex but a look at the example hostess_sv11 driver should reassure you. The network device used for each channel should be pointed to by - the netdevice field of each channel. The dev-> priv field of the + the netdevice field of each channel. The hdlc-> priv field of the network device points to your private data - you will need to be - able to find your ppp device from this. In addition to use the - sync ppp layer the private data must start with a void * pointer - to the syncppp structures. + able to find your private data from this. The way most drivers approach this particular problem is to create a structure holding the Z8530 device definition and - put that and the syncppp pointer into the private field of - the network device. The network device fields of the channels - then point back to the network devices. The ppp_device can also - be put in the private structure conveniently. + put that into the private field of the network device. The + network device fields of the channels then point back to the + network devices. - If you wish to use the synchronous ppp then you need to attach - the syncppp layer to the network device. You should do this before - you register the network device. The - sppp_attach requires that the first void * - pointer in your private data is pointing to an empty struct - ppp_device. The function fills in the initial data for the - ppp/hdlc layer. + If you wish to use the generic HDLC then you need to register + the HDLC device. Before you register your network device you will also need to @@ -314,10 +300,10 @@ buffer in sk_buff format and queues it for transmission. The caller must provide the entire packet with the exception of the bitstuffing and CRC. This is normally done by the caller via - the syncppp interface layer. It returns 0 if the buffer has been - queued and non zero values for queue full. If the function accepts - the buffer it becomes property of the Z8530 layer and the caller - should not free it. + the generic HDLC interface layer. It returns 0 if the buffer has been + queued and non zero values for queue full. If the function accepts + the buffer it becomes property of the Z8530 layer and the caller + should not free it. The function z8530_get_stats returns a pointer diff --git a/Documentation/arm/IXP4xx b/Documentation/arm/IXP4xx index 43edb4ecf27d..72fbcc4fcab0 100644 --- a/Documentation/arm/IXP4xx +++ b/Documentation/arm/IXP4xx @@ -32,7 +32,7 @@ Linux currently supports the following features on the IXP4xx chips: - Flash access (MTD/JFFS) - I2C through GPIO on IXP42x - GPIO for input/output/interrupts - See include/asm-arm/arch-ixp4xx/platform.h for access functions. + See arch/arm/mach-ixp4xx/include/mach/platform.h for access functions. - Timers (watchdog, OS) The following components of the chips are not supported by Linux and diff --git a/Documentation/arm/Interrupts b/Documentation/arm/Interrupts index c202ed35d7d6..f09ab1b90ef1 100644 --- a/Documentation/arm/Interrupts +++ b/Documentation/arm/Interrupts @@ -158,7 +158,7 @@ So, what's changed? be re-checked for pending events. (see the Neponset IRQ handler for details). -7. fixup_irq() is gone, as is include/asm-arm/arch-*/irq.h +7. fixup_irq() is gone, as is arch/arm/mach-*/include/mach/irq.h Please note that this will not solve all problems - some of them are hardware based. Mixing level-based and edge-based IRQs on the same diff --git a/Documentation/arm/README b/Documentation/arm/README index 9b9c8226fdc4..d98783fbe0c7 100644 --- a/Documentation/arm/README +++ b/Documentation/arm/README @@ -79,7 +79,7 @@ Machine/Platform support To this end, we now have arch/arm/mach-$(MACHINE) directories which are designed to house the non-driver files for a particular machine (eg, PCI, memory management, architecture definitions etc). For all future - machines, there should be a corresponding include/asm-arm/arch-$(MACHINE) + machines, there should be a corresponding arch/arm/mach-$(MACHINE)/include/mach directory. @@ -176,7 +176,7 @@ Kernel entry (head.S) class typically based around one or more system on a chip devices, and acts as a natural container around the actual implementations. These classes are given directories - arch/arm/mach- and - include/asm-arm/arch- - which contain the source files to + arch/arm/mach- - which contain the source files to/include/mach support the machine class. This directories also contain any machine specific supporting code. diff --git a/Documentation/arm/Samsung-S3C24XX/GPIO.txt b/Documentation/arm/Samsung-S3C24XX/GPIO.txt index 8caea8c237ee..b5d20c0b2ab4 100644 --- a/Documentation/arm/Samsung-S3C24XX/GPIO.txt +++ b/Documentation/arm/Samsung-S3C24XX/GPIO.txt @@ -16,13 +16,13 @@ Introduction Headers ------- - See include/asm-arm/arch-s3c2410/regs-gpio.h for the list + See arch/arm/mach-s3c2410/include/mach/regs-gpio.h for the list of GPIO pins, and the configuration values for them. This - is included by using #include + is included by using #include The GPIO management functions are defined in the hardware - header include/asm-arm/arch-s3c2410/hardware.h which can be - included by #include + header arch/arm/mach-s3c2410/include/mach/hardware.h which can be + included by #include A useful amount of documentation can be found in the hardware header on how the GPIO functions (and others) work. diff --git a/Documentation/arm/Samsung-S3C24XX/Overview.txt b/Documentation/arm/Samsung-S3C24XX/Overview.txt index d04e1e30c47f..014a8ec4877d 100644 --- a/Documentation/arm/Samsung-S3C24XX/Overview.txt +++ b/Documentation/arm/Samsung-S3C24XX/Overview.txt @@ -36,7 +36,7 @@ Layout in arch/arm/mach-s3c2410 and S3C2440 in arch/arm/mach-s3c2440 Register, kernel and platform data definitions are held in the - include/asm-arm/arch-s3c2410 directory. + arch/arm/mach-s3c2410 directory./include/mach Machines diff --git a/Documentation/arm/Samsung-S3C24XX/USB-Host.txt b/Documentation/arm/Samsung-S3C24XX/USB-Host.txt index b93b68e2b143..67671eba4231 100644 --- a/Documentation/arm/Samsung-S3C24XX/USB-Host.txt +++ b/Documentation/arm/Samsung-S3C24XX/USB-Host.txt @@ -49,7 +49,7 @@ Board Support Platform Data ------------- - See linux/include/asm-arm/arch-s3c2410/usb-control.h for the + See arch/arm/mach-s3c2410/include/mach/usb-control.h for the descriptions of the platform device data. An implementation can be found in linux/arch/arm/mach-s3c2410/usb-simtec.c . diff --git a/Documentation/cciss.txt b/Documentation/cciss.txt index 63e59b8847c5..8244c6442faa 100644 --- a/Documentation/cciss.txt +++ b/Documentation/cciss.txt @@ -112,27 +112,18 @@ Hot plug support for SCSI tape drives Hot plugging of SCSI tape drives is supported, with some caveats. The cciss driver must be informed that changes to the SCSI bus -have been made, in addition to and prior to informing the SCSI -mid layer. This may be done via the /proc filesystem. For example: +have been made. This may be done via the /proc filesystem. +For example: echo "rescan" > /proc/scsi/cciss0/1 -This causes the adapter to query the adapter about changes to the -physical SCSI buses and/or fibre channel arbitrated loop and the +This causes the driver to query the adapter about changes to the +physical SCSI buses and/or fibre channel arbitrated loop and the driver to make note of any new or removed sequential access devices or medium changers. The driver will output messages indicating what devices have been added or removed and the controller, bus, target and -lun used to address the device. Once this is done, the SCSI mid layer -can be informed of changes to the virtual SCSI bus which the driver -presents to it in the usual way. For example: - - echo scsi add-single-device 3 2 1 0 > /proc/scsi/scsi - -to add a device on controller 3, bus 2, target 1, lun 0. Note that -the driver makes an effort to preserve the devices positions -in the virtual SCSI bus, so if you are only moving tape drives -around on the same adapter and not adding or removing tape drives -from the adapter, informing the SCSI mid layer may not be necessary. +lun used to address the device. It then notifies the SCSI mid layer +of these changes. Note that the naming convention of the /proc filesystem entries contains a number in addition to the driver name. (E.g. "cciss0" diff --git a/Documentation/cli-sti-removal.txt b/Documentation/cli-sti-removal.txt deleted file mode 100644 index 60932b02fcb3..000000000000 --- a/Documentation/cli-sti-removal.txt +++ /dev/null @@ -1,133 +0,0 @@ - -#### cli()/sti() removal guide, started by Ingo Molnar - - -as of 2.5.28, five popular macros have been removed on SMP, and -are being phased out on UP: - - cli(), sti(), save_flags(flags), save_flags_cli(flags), restore_flags(flags) - -until now it was possible to protect driver code against interrupt -handlers via a cli(), but from now on other, more lightweight methods -have to be used for synchronization, such as spinlocks or semaphores. - -for example, driver code that used to do something like: - - struct driver_data; - - irq_handler (...) - { - .... - driver_data.finish = 1; - driver_data.new_work = 0; - .... - } - - ... - - ioctl_func (...) - { - ... - cli(); - ... - driver_data.finish = 0; - driver_data.new_work = 2; - ... - sti(); - ... - } - -was SMP-correct because the cli() function ensured that no -interrupt handler (amongst them the above irq_handler()) function -would execute while the cli()-ed section is executing. - -but from now on a more direct method of locking has to be used: - - DEFINE_SPINLOCK(driver_lock); - struct driver_data; - - irq_handler (...) - { - unsigned long flags; - .... - spin_lock_irqsave(&driver_lock, flags); - .... - driver_data.finish = 1; - driver_data.new_work = 0; - .... - spin_unlock_irqrestore(&driver_lock, flags); - .... - } - - ... - - ioctl_func (...) - { - ... - spin_lock_irq(&driver_lock); - ... - driver_data.finish = 0; - driver_data.new_work = 2; - ... - spin_unlock_irq(&driver_lock); - ... - } - -the above code has a number of advantages: - -- the locking relation is easier to understand - actual lock usage - pinpoints the critical sections. cli() usage is too opaque. - Easier to understand means it's easier to debug. - -- it's faster, because spinlocks are faster to acquire than the - potentially heavily-used IRQ lock. Furthermore, your driver does - not have to wait eg. for a big heavy SCSI interrupt to finish, - because the driver_lock spinlock is only used by your driver. - cli() on the other hand was used by many drivers, and extended - the critical section to the whole IRQ handler function - creating - serious lock contention. - - -to make the transition easier, we've still kept the cli(), sti(), -save_flags(), save_flags_cli() and restore_flags() macros defined -on UP systems - but their usage will be phased out until 2.6 is -released. - -drivers that want to disable local interrupts (interrupts on the -current CPU), can use the following five macros: - - local_irq_disable(), local_irq_enable(), local_save_flags(flags), - local_irq_save(flags), local_irq_restore(flags) - -but beware, their meaning and semantics are much simpler, far from -that of the old cli(), sti(), save_flags(flags) and restore_flags(flags) -SMP meaning: - - local_irq_disable() => turn local IRQs off - - local_irq_enable() => turn local IRQs on - - local_save_flags(flags) => save the current IRQ state into flags. The - state can be on or off. (on some - architectures there's even more bits in it.) - - local_irq_save(flags) => save the current IRQ state into flags and - disable interrupts. - - local_irq_restore(flags) => restore the IRQ state from flags. - -(local_irq_save can save both irqs on and irqs off state, and -local_irq_restore can restore into both irqs on and irqs off state.) - -another related change is that synchronize_irq() now takes a parameter: -synchronize_irq(irq). This change too has the purpose of making SMP -synchronization more lightweight - this way you can wait for your own -interrupt handler to finish, no need to wait for other IRQ sources. - - -why were these changes done? The main reason was the architectural burden -of maintaining the cli()/sti() interface - it became a real problem. The -new interrupt system is much more streamlined, easier to understand, debug, -and it's also a bit faster - the same happened to it that will happen to -cli()/sti() using drivers once they convert to spinlocks :-) - diff --git a/Documentation/filesystems/configfs/configfs.txt b/Documentation/filesystems/configfs/configfs.txt index 44c97e6accb2..fabcb0e00f25 100644 --- a/Documentation/filesystems/configfs/configfs.txt +++ b/Documentation/filesystems/configfs/configfs.txt @@ -311,9 +311,20 @@ the subsystem must be ready for it. [An Example] The best example of these basic concepts is the simple_children -subsystem/group and the simple_child item in configfs_example.c It -shows a trivial object displaying and storing an attribute, and a simple -group creating and destroying these children. +subsystem/group and the simple_child item in configfs_example_explicit.c +and configfs_example_macros.c. It shows a trivial object displaying and +storing an attribute, and a simple group creating and destroying these +children. + +The only difference between configfs_example_explicit.c and +configfs_example_macros.c is how the attributes of the childless item +are defined. The childless item has extended attributes, each with +their own show()/store() operation. This follows a convention commonly +used in sysfs. configfs_example_explicit.c creates these attributes +by explicitly defining the structures involved. Conversely +configfs_example_macros.c uses some convenience macros from configfs.h +to define the attributes. These macros are similar to their sysfs +counterparts. [Hierarchy Navigation and the Subsystem Mutex] diff --git a/Documentation/filesystems/configfs/configfs_example.c b/Documentation/filesystems/configfs/configfs_example_explicit.c similarity index 96% rename from Documentation/filesystems/configfs/configfs_example.c rename to Documentation/filesystems/configfs/configfs_example_explicit.c index 039648791701..d428cc9f07f3 100644 --- a/Documentation/filesystems/configfs/configfs_example.c +++ b/Documentation/filesystems/configfs/configfs_example_explicit.c @@ -1,8 +1,10 @@ /* * vim: noexpandtab ts=8 sts=0 sw=8: * - * configfs_example.c - This file is a demonstration module containing - * a number of configfs subsystems. + * configfs_example_explicit.c - This file is a demonstration module + * containing a number of configfs subsystems. It explicitly defines + * each structure without using the helper macros defined in + * configfs.h. * * This program is free software; you can redistribute it and/or * modify it under the terms of the GNU General Public @@ -281,7 +283,6 @@ static struct config_item *simple_children_make_item(struct config_group *group, if (!simple_child) return ERR_PTR(-ENOMEM); - config_item_init_type_name(&simple_child->item, name, &simple_child_type); @@ -302,8 +303,8 @@ static struct configfs_attribute *simple_children_attrs[] = { }; static ssize_t simple_children_attr_show(struct config_item *item, - struct configfs_attribute *attr, - char *page) + struct configfs_attribute *attr, + char *page) { return sprintf(page, "[02-simple-children]\n" @@ -318,7 +319,7 @@ static void simple_children_release(struct config_item *item) } static struct configfs_item_operations simple_children_item_ops = { - .release = simple_children_release, + .release = simple_children_release, .show_attribute = simple_children_attr_show, }; @@ -368,7 +369,6 @@ static struct config_group *group_children_make_group(struct config_group *group if (!simple_children) return ERR_PTR(-ENOMEM); - config_group_init_type_name(&simple_children->group, name, &simple_children_type); @@ -387,8 +387,8 @@ static struct configfs_attribute *group_children_attrs[] = { }; static ssize_t group_children_attr_show(struct config_item *item, - struct configfs_attribute *attr, - char *page) + struct configfs_attribute *attr, + char *page) { return sprintf(page, "[03-group-children]\n" diff --git a/Documentation/filesystems/configfs/configfs_example_macros.c b/Documentation/filesystems/configfs/configfs_example_macros.c new file mode 100644 index 000000000000..d8e30a0378aa --- /dev/null +++ b/Documentation/filesystems/configfs/configfs_example_macros.c @@ -0,0 +1,448 @@ +/* + * vim: noexpandtab ts=8 sts=0 sw=8: + * + * configfs_example_macros.c - This file is a demonstration module + * containing a number of configfs subsystems. It uses the helper + * macros defined by configfs.h + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public + * License as published by the Free Software Foundation; either + * version 2 of the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU + * General Public License for more details. + * + * You should have received a copy of the GNU General Public + * License along with this program; if not, write to the + * Free Software Foundation, Inc., 59 Temple Place - Suite 330, + * Boston, MA 021110-1307, USA. + * + * Based on sysfs: + * sysfs is Copyright (C) 2001, 2002, 2003 Patrick Mochel + * + * configfs Copyright (C) 2005 Oracle. All rights reserved. + */ + +#include +#include +#include + +#include + + + +/* + * 01-childless + * + * This first example is a childless subsystem. It cannot create + * any config_items. It just has attributes. + * + * Note that we are enclosing the configfs_subsystem inside a container. + * This is not necessary if a subsystem has no attributes directly + * on the subsystem. See the next example, 02-simple-children, for + * such a subsystem. + */ + +struct childless { + struct configfs_subsystem subsys; + int showme; + int storeme; +}; + +static inline struct childless *to_childless(struct config_item *item) +{ + return item ? container_of(to_configfs_subsystem(to_config_group(item)), struct childless, subsys) : NULL; +} + +CONFIGFS_ATTR_STRUCT(childless); +#define CHILDLESS_ATTR(_name, _mode, _show, _store) \ +struct childless_attribute childless_attr_##_name = __CONFIGFS_ATTR(_name, _mode, _show, _store) +#define CHILDLESS_ATTR_RO(_name, _show) \ +struct childless_attribute childless_attr_##_name = __CONFIGFS_ATTR_RO(_name, _show); + +static ssize_t childless_showme_read(struct childless *childless, + char *page) +{ + ssize_t pos; + + pos = sprintf(page, "%d\n", childless->showme); + childless->showme++; + + return pos; +} + +static ssize_t childless_storeme_read(struct childless *childless, + char *page) +{ + return sprintf(page, "%d\n", childless->storeme); +} + +static ssize_t childless_storeme_write(struct childless *childless, + const char *page, + size_t count) +{ + unsigned long tmp; + char *p = (char *) page; + + tmp = simple_strtoul(p, &p, 10); + if (!p || (*p && (*p != '\n'))) + return -EINVAL; + + if (tmp > INT_MAX) + return -ERANGE; + + childless->storeme = tmp; + + return count; +} + +static ssize_t childless_description_read(struct childless *childless, + char *page) +{ + return sprintf(page, +"[01-childless]\n" +"\n" +"The childless subsystem is the simplest possible subsystem in\n" +"configfs. It does not support the creation of child config_items.\n" +"It only has a few attributes. In fact, it isn't much different\n" +"than a directory in /proc.\n"); +} + +CHILDLESS_ATTR_RO(showme, childless_showme_read); +CHILDLESS_ATTR(storeme, S_IRUGO | S_IWUSR, childless_storeme_read, + childless_storeme_write); +CHILDLESS_ATTR_RO(description, childless_description_read); + +static struct configfs_attribute *childless_attrs[] = { + &childless_attr_showme.attr, + &childless_attr_storeme.attr, + &childless_attr_description.attr, + NULL, +}; + +CONFIGFS_ATTR_OPS(childless); +static struct configfs_item_operations childless_item_ops = { + .show_attribute = childless_attr_show, + .store_attribute = childless_attr_store, +}; + +static struct config_item_type childless_type = { + .ct_item_ops = &childless_item_ops, + .ct_attrs = childless_attrs, + .ct_owner = THIS_MODULE, +}; + +static struct childless childless_subsys = { + .subsys = { + .su_group = { + .cg_item = { + .ci_namebuf = "01-childless", + .ci_type = &childless_type, + }, + }, + }, +}; + + +/* ----------------------------------------------------------------- */ + +/* + * 02-simple-children + * + * This example merely has a simple one-attribute child. Note that + * there is no extra attribute structure, as the child's attribute is + * known from the get-go. Also, there is no container for the + * subsystem, as it has no attributes of its own. + */ + +struct simple_child { + struct config_item item; + int storeme; +}; + +static inline struct simple_child *to_simple_child(struct config_item *item) +{ + return item ? container_of(item, struct simple_child, item) : NULL; +} + +static struct configfs_attribute simple_child_attr_storeme = { + .ca_owner = THIS_MODULE, + .ca_name = "storeme", + .ca_mode = S_IRUGO | S_IWUSR, +}; + +static struct configfs_attribute *simple_child_attrs[] = { + &simple_child_attr_storeme, + NULL, +}; + +static ssize_t simple_child_attr_show(struct config_item *item, + struct configfs_attribute *attr, + char *page) +{ + ssize_t count; + struct simple_child *simple_child = to_simple_child(item); + + count = sprintf(page, "%d\n", simple_child->storeme); + + return count; +} + +static ssize_t simple_child_attr_store(struct config_item *item, + struct configfs_attribute *attr, + const char *page, size_t count) +{ + struct simple_child *simple_child = to_simple_child(item); + unsigned long tmp; + char *p = (char *) page; + + tmp = simple_strtoul(p, &p, 10); + if (!p || (*p && (*p != '\n'))) + return -EINVAL; + + if (tmp > INT_MAX) + return -ERANGE; + + simple_child->storeme = tmp; + + return count; +} + +static void simple_child_release(struct config_item *item) +{ + kfree(to_simple_child(item)); +} + +static struct configfs_item_operations simple_child_item_ops = { + .release = simple_child_release, + .show_attribute = simple_child_attr_show, + .store_attribute = simple_child_attr_store, +}; + +static struct config_item_type simple_child_type = { + .ct_item_ops = &simple_child_item_ops, + .ct_attrs = simple_child_attrs, + .ct_owner = THIS_MODULE, +}; + + +struct simple_children { + struct config_group group; +}; + +static inline struct simple_children *to_simple_children(struct config_item *item) +{ + return item ? container_of(to_config_group(item), struct simple_children, group) : NULL; +} + +static struct config_item *simple_children_make_item(struct config_group *group, const char *name) +{ + struct simple_child *simple_child; + + simple_child = kzalloc(sizeof(struct simple_child), GFP_KERNEL); + if (!simple_child) + return ERR_PTR(-ENOMEM); + + config_item_init_type_name(&simple_child->item, name, + &simple_child_type); + + simple_child->storeme = 0; + + return &simple_child->item; +} + +static struct configfs_attribute simple_children_attr_description = { + .ca_owner = THIS_MODULE, + .ca_name = "description", + .ca_mode = S_IRUGO, +}; + +static struct configfs_attribute *simple_children_attrs[] = { + &simple_children_attr_description, + NULL, +}; + +static ssize_t simple_children_attr_show(struct config_item *item, + struct configfs_attribute *attr, + char *page) +{ + return sprintf(page, +"[02-simple-children]\n" +"\n" +"This subsystem allows the creation of child config_items. These\n" +"items have only one attribute that is readable and writeable.\n"); +} + +static void simple_children_release(struct config_item *item) +{ + kfree(to_simple_children(item)); +} + +static struct configfs_item_operations simple_children_item_ops = { + .release = simple_children_release, + .show_attribute = simple_children_attr_show, +}; + +/* + * Note that, since no extra work is required on ->drop_item(), + * no ->drop_item() is provided. + */ +static struct configfs_group_operations simple_children_group_ops = { + .make_item = simple_children_make_item, +}; + +static struct config_item_type simple_children_type = { + .ct_item_ops = &simple_children_item_ops, + .ct_group_ops = &simple_children_group_ops, + .ct_attrs = simple_children_attrs, + .ct_owner = THIS_MODULE, +}; + +static struct configfs_subsystem simple_children_subsys = { + .su_group = { + .cg_item = { + .ci_namebuf = "02-simple-children", + .ci_type = &simple_children_type, + }, + }, +}; + + +/* ----------------------------------------------------------------- */ + +/* + * 03-group-children + * + * This example reuses the simple_children group from above. However, + * the simple_children group is not the subsystem itself, it is a + * child of the subsystem. Creation of a group in the subsystem creates + * a new simple_children group. That group can then have simple_child + * children of its own. + */ + +static struct config_group *group_children_make_group(struct config_group *group, const char *name) +{ + struct simple_children *simple_children; + + simple_children = kzalloc(sizeof(struct simple_children), + GFP_KERNEL); + if (!simple_children) + return ERR_PTR(-ENOMEM); + + config_group_init_type_name(&simple_children->group, name, + &simple_children_type); + + return &simple_children->group; +} + +static struct configfs_attribute group_children_attr_description = { + .ca_owner = THIS_MODULE, + .ca_name = "description", + .ca_mode = S_IRUGO, +}; + +static struct configfs_attribute *group_children_attrs[] = { + &group_children_attr_description, + NULL, +}; + +static ssize_t group_children_attr_show(struct config_item *item, + struct configfs_attribute *attr, + char *page) +{ + return sprintf(page, +"[03-group-children]\n" +"\n" +"This subsystem allows the creation of child config_groups. These\n" +"groups are like the subsystem simple-children.\n"); +} + +static struct configfs_item_operations group_children_item_ops = { + .show_attribute = group_children_attr_show, +}; + +/* + * Note that, since no extra work is required on ->drop_item(), + * no ->drop_item() is provided. + */ +static struct configfs_group_operations group_children_group_ops = { + .make_group = group_children_make_group, +}; + +static struct config_item_type group_children_type = { + .ct_item_ops = &group_children_item_ops, + .ct_group_ops = &group_children_group_ops, + .ct_attrs = group_children_attrs, + .ct_owner = THIS_MODULE, +}; + +static struct configfs_subsystem group_children_subsys = { + .su_group = { + .cg_item = { + .ci_namebuf = "03-group-children", + .ci_type = &group_children_type, + }, + }, +}; + +/* ----------------------------------------------------------------- */ + +/* + * We're now done with our subsystem definitions. + * For convenience in this module, here's a list of them all. It + * allows the init function to easily register them. Most modules + * will only have one subsystem, and will only call register_subsystem + * on it directly. + */ +static struct configfs_subsystem *example_subsys[] = { + &childless_subsys.subsys, + &simple_children_subsys, + &group_children_subsys, + NULL, +}; + +static int __init configfs_example_init(void) +{ + int ret; + int i; + struct configfs_subsystem *subsys; + + for (i = 0; example_subsys[i]; i++) { + subsys = example_subsys[i]; + + config_group_init(&subsys->su_group); + mutex_init(&subsys->su_mutex); + ret = configfs_register_subsystem(subsys); + if (ret) { + printk(KERN_ERR "Error %d while registering subsystem %s\n", + ret, + subsys->su_group.cg_item.ci_namebuf); + goto out_unregister; + } + } + + return 0; + +out_unregister: + for (; i >= 0; i--) { + configfs_unregister_subsystem(example_subsys[i]); + } + + return ret; +} + +static void __exit configfs_example_exit(void) +{ + int i; + + for (i = 0; example_subsys[i]; i++) { + configfs_unregister_subsystem(example_subsys[i]); + } +} + +module_init(configfs_example_init); +module_exit(configfs_example_exit); +MODULE_LICENSE("GPL"); diff --git a/Documentation/ftrace.txt b/Documentation/ftrace.txt index f218f616ff6b..d330fe3103da 100644 --- a/Documentation/ftrace.txt +++ b/Documentation/ftrace.txt @@ -4,6 +4,7 @@ Copyright 2008 Red Hat Inc. Author: Steven Rostedt License: The GNU Free Documentation License, Version 1.2 + (dual licensed under the GPL v2) Reviewers: Elias Oltmanns, Randy Dunlap, Andrew Morton, John Kacur, and David Teigland. diff --git a/Documentation/hwmon/dme1737 b/Documentation/hwmon/dme1737 index 8f446070e64a..001d2e70bc11 100644 --- a/Documentation/hwmon/dme1737 +++ b/Documentation/hwmon/dme1737 @@ -10,6 +10,10 @@ Supported chips: Prefix: 'sch311x' Addresses scanned: none, address read from Super-I/O config space Datasheet: http://www.nuhorizons.com/FeaturedProducts/Volume1/SMSC/311x.pdf + * SMSC SCH5027 + Prefix: 'sch5027' + Addresses scanned: I2C 0x2c, 0x2d, 0x2e + Datasheet: Provided by SMSC upon request and under NDA Authors: Juerg Haefliger @@ -22,34 +26,36 @@ Module Parameters and PWM output control functions. Using this parameter shouldn't be required since the BIOS usually takes care of this. - -Note that there is no need to use this parameter if the driver loads without -complaining. The driver will say so if it is necessary. +* probe_all_addr: bool Include non-standard LPC addresses 0x162e and 0x164e + when probing for ISA devices. This is required for the + following boards: + - VIA EPIA SN18000 Description ----------- This driver implements support for the hardware monitoring capabilities of the -SMSC DME1737 and Asus A8000 (which are the same) and SMSC SCH311x Super-I/O -chips. These chips feature monitoring of 3 temp sensors temp[1-3] (2 remote -diodes and 1 internal), 7 voltages in[0-6] (6 external and 1 internal) and up -to 6 fan speeds fan[1-6]. Additionally, the chips implement up to 5 PWM -outputs pwm[1-3,5-6] for controlling fan speeds both manually and +SMSC DME1737 and Asus A8000 (which are the same), SMSC SCH5027, and SMSC +SCH311x Super-I/O chips. These chips feature monitoring of 3 temp sensors +temp[1-3] (2 remote diodes and 1 internal), 7 voltages in[0-6] (6 external and +1 internal) and up to 6 fan speeds fan[1-6]. Additionally, the chips implement +up to 5 PWM outputs pwm[1-3,5-6] for controlling fan speeds both manually and automatically. -For the DME1737 and A8000, fan[1-2] and pwm[1-2] are always present. Fan[3-6] -and pwm[3,5-6] are optional features and their availability depends on the -configuration of the chip. The driver will detect which features are present -during initialization and create the sysfs attributes accordingly. +For the DME1737, A8000 and SCH5027, fan[1-2] and pwm[1-2] are always present. +Fan[3-6] and pwm[3,5-6] are optional features and their availability depends on +the configuration of the chip. The driver will detect which features are +present during initialization and create the sysfs attributes accordingly. For the SCH311x, fan[1-3] and pwm[1-3] are always present and fan[4-6] and pwm[5-6] don't exist. -The hardware monitoring features of the DME1737 and A8000 are only accessible -via SMBus, while the SCH311x only provides access via the ISA bus. The driver -will therefore register itself as an I2C client driver if it detects a DME1737 -or A8000 and as a platform driver if it detects a SCH311x chip. +The hardware monitoring features of the DME1737, A8000, and SCH5027 are only +accessible via SMBus, while the SCH311x only provides access via the ISA bus. +The driver will therefore register itself as an I2C client driver if it detects +a DME1737, A8000, or SCH5027 and as a platform driver if it detects a SCH311x +chip. Voltage Monitoring @@ -60,6 +66,7 @@ scaling resistors. The values returned by the driver therefore reflect true millivolts and don't need scaling. The voltage inputs are mapped as follows (the last column indicates the input ranges): +DME1737, A8000: in0: +5VTR (+5V standby) 0V - 6.64V in1: Vccp (processor core) 0V - 3V in2: VCC (internal +3.3V) 0V - 4.38V @@ -68,6 +75,24 @@ millivolts and don't need scaling. The voltage inputs are mapped as follows in5: VTR (+3.3V standby) 0V - 4.38V in6: Vbat (+3.0V) 0V - 4.38V +SCH311x: + in0: +2.5V 0V - 6.64V + in1: Vccp (processor core) 0V - 2V + in2: VCC (internal +3.3V) 0V - 4.38V + in3: +5V 0V - 6.64V + in4: +12V 0V - 16V + in5: VTR (+3.3V standby) 0V - 4.38V + in6: Vbat (+3.0V) 0V - 4.38V + +SCH5027: + in0: +5VTR (+5V standby) 0V - 6.64V + in1: Vccp (processor core) 0V - 3V + in2: VCC (internal +3.3V) 0V - 4.38V + in3: V2_IN 0V - 1.5V + in4: V1_IN 0V - 1.5V + in5: VTR (+3.3V standby) 0V - 4.38V + in6: Vbat (+3.0V) 0V - 4.38V + Each voltage input has associated min and max limits which trigger an alarm when crossed. diff --git a/Documentation/hwmon/it87 b/Documentation/hwmon/it87 index f4ce1fdbeff6..3496b7020e7c 100644 --- a/Documentation/hwmon/it87 +++ b/Documentation/hwmon/it87 @@ -6,12 +6,14 @@ Supported chips: Prefix: 'it87' Addresses scanned: from Super I/O config space (8 I/O ports) Datasheet: Publicly available at the ITE website - http://www.ite.com.tw/ + http://www.ite.com.tw/product_info/file/pc/IT8705F_V.0.4.1.pdf * IT8712F Prefix: 'it8712' Addresses scanned: from Super I/O config space (8 I/O ports) Datasheet: Publicly available at the ITE website - http://www.ite.com.tw/ + http://www.ite.com.tw/product_info/file/pc/IT8712F_V0.9.1.pdf + http://www.ite.com.tw/product_info/file/pc/Errata%20V0.1%20for%20IT8712F%20V0.9.1.pdf + http://www.ite.com.tw/product_info/file/pc/IT8712F_V0.9.3.pdf * IT8716F/IT8726F Prefix: 'it8716' Addresses scanned: from Super I/O config space (8 I/O ports) @@ -90,14 +92,13 @@ upper VID bits share their pins with voltage inputs (in5 and in6) so you can't have both on a given board. The IT8716F, IT8718F and later IT8712F revisions have support for -2 additional fans. They are supported by the driver for the IT8716F and -IT8718F but not for the IT8712F +2 additional fans. The additional fans are supported by the driver. The IT8716F and IT8718F, and late IT8712F and IT8705F also have optional 16-bit tachometer counters for fans 1 to 3. This is better (no more fan clock divider mess) but not compatible with the older chips and -revisions. For now, the driver only uses the 16-bit mode on the -IT8716F and IT8718F. +revisions. The 16-bit tachometer mode is enabled by the driver when one +of the above chips is detected. The IT8726F is just bit enhanced IT8716F with additional hardware for AMD power sequencing. Therefore the chip will appear as IT8716F diff --git a/Documentation/hwmon/lm85 b/Documentation/hwmon/lm85 index 9549237530cf..6d41db7f17f8 100644 --- a/Documentation/hwmon/lm85 +++ b/Documentation/hwmon/lm85 @@ -96,11 +96,6 @@ initial testing of the ADM1027 it was 1.00 degC steps. Analog Devices has confirmed this "bug". The ADT7463 is reported to work as described in the documentation. The current lm85 driver does not show the offset register. -The ADT7463 has a THERM asserted counter. This counter has a 22.76ms -resolution and a range of 5.8 seconds. The driver implements a 32-bit -accumulator of the counter value to extend the range to over a year. The -counter will stay at it's max value until read. - See the vendor datasheets for more information. There is application note from National (AN-1260) with some additional information about the LM85. The Analog Devices datasheet is very detailed and describes a procedure for @@ -206,13 +201,15 @@ Configuration choices: The National LM85's have two vendor specific configuration features. Tach. mode and Spinup Control. For more details on these, -see the LM85 datasheet or Application Note AN-1260. +see the LM85 datasheet or Application Note AN-1260. These features +are not currently supported by the lm85 driver. The Analog Devices ADM1027 has several vendor specific enhancements. The number of pulses-per-rev of the fans can be set, Tach monitoring can be optimized for PWM operation, and an offset can be applied to the temperatures to compensate for systemic errors in the -measurements. +measurements. These features are not currently supported by the lm85 +driver. In addition to the ADM1027 features, the ADT7463 also has Tmin control and THERM asserted counts. Automatic Tmin control acts to adjust the diff --git a/Documentation/hwmon/w83627hf b/Documentation/hwmon/w83627hf index 880a59f53da9..6ee36dbafd64 100644 --- a/Documentation/hwmon/w83627hf +++ b/Documentation/hwmon/w83627hf @@ -40,10 +40,6 @@ Module Parameters (default is 1) Use 'init=0' to bypass initializing the chip. Try this if your computer crashes when you load the module. -* reset: int - (default is 0) - The driver used to reset the chip on load, but does no more. Use - 'reset=1' to restore the old behavior. Report if you need to do this. Description ----------- diff --git a/Documentation/hwmon/w83791d b/Documentation/hwmon/w83791d index f153b2f6d62c..a67d3b7a7098 100644 --- a/Documentation/hwmon/w83791d +++ b/Documentation/hwmon/w83791d @@ -22,6 +22,7 @@ Credits: Additional contributors: Sven Anders + Marc Hulsman Module Parameters ----------------- @@ -67,9 +68,8 @@ on until the temperature falls below the Hysteresis value. Fan rotation speeds are reported in RPM (rotations per minute). An alarm is triggered if the rotation speed has dropped below a programmable limit. Fan -readings can be divided by a programmable divider (1, 2, 4, 8 for fan 1/2/3 -and 1, 2, 4, 8, 16, 32, 64 or 128 for fan 4/5) to give the readings more -range or accuracy. +readings can be divided by a programmable divider (1, 2, 4, 8, 16, +32, 64 or 128 for all fans) to give the readings more range or accuracy. Voltage sensors (also known as IN sensors) report their values in millivolts. An alarm is triggered if the voltage has crossed a programmable minimum diff --git a/Documentation/power/pm_qos_interface.txt b/Documentation/power/pm_qos_interface.txt index 49adb1a33514..c40866e8b957 100644 --- a/Documentation/power/pm_qos_interface.txt +++ b/Documentation/power/pm_qos_interface.txt @@ -1,4 +1,4 @@ -PM quality of Service interface. +PM Quality Of Service Interface. This interface provides a kernel and user mode interface for registering performance expectations by drivers, subsystems and user space applications on @@ -7,6 +7,11 @@ one of the parameters. Currently we have {cpu_dma_latency, network_latency, network_throughput} as the initial set of pm_qos parameters. +Each parameters have defined units: + * latency: usec + * timeout: usec + * throughput: kbs (kilo bit / sec) + The infrastructure exposes multiple misc device nodes one per implemented parameter. The set of parameters implement is defined by pm_qos_power_init() and pm_qos_params.h. This is done because having the available parameters diff --git a/Documentation/power/power_supply_class.txt b/Documentation/power/power_supply_class.txt index a8686e5a6857..c6cd4956047c 100644 --- a/Documentation/power/power_supply_class.txt +++ b/Documentation/power/power_supply_class.txt @@ -101,6 +101,10 @@ of charge when battery became full/empty". It also could mean "value of charge when battery considered full/empty at given conditions (temperature, age)". I.e. these attributes represents real thresholds, not design values. +CHARGE_COUNTER - the current charge counter (in µAh). This could easily +be negative; there is no empty or full value. It is only useful for +relative, time-based measurements. + ENERGY_FULL, ENERGY_EMPTY - same as above but for energy. CAPACITY - capacity in percents. diff --git a/Documentation/power/regulator/consumer.txt b/Documentation/power/regulator/consumer.txt new file mode 100644 index 000000000000..82b7a43aadba --- /dev/null +++ b/Documentation/power/regulator/consumer.txt @@ -0,0 +1,182 @@ +Regulator Consumer Driver Interface +=================================== + +This text describes the regulator interface for consumer device drivers. +Please see overview.txt for a description of the terms used in this text. + + +1. Consumer Regulator Access (static & dynamic drivers) +======================================================= + +A consumer driver can get access to it's supply regulator by calling :- + +regulator = regulator_get(dev, "Vcc"); + +The consumer passes in it's struct device pointer and power supply ID. The core +then finds the correct regulator by consulting a machine specific lookup table. +If the lookup is successful then this call will return a pointer to the struct +regulator that supplies this consumer. + +To release the regulator the consumer driver should call :- + +regulator_put(regulator); + +Consumers can be supplied by more than one regulator e.g. codec consumer with +analog and digital supplies :- + +digital = regulator_get(dev, "Vcc"); /* digital core */ +analog = regulator_get(dev, "Avdd"); /* analog */ + +The regulator access functions regulator_get() and regulator_put() will +usually be called in your device drivers probe() and remove() respectively. + + +2. Regulator Output Enable & Disable (static & dynamic drivers) +==================================================================== + +A consumer can enable it's power supply by calling:- + +int regulator_enable(regulator); + +NOTE: The supply may already be enabled before regulator_enabled() is called. +This may happen if the consumer shares the regulator or the regulator has been +previously enabled by bootloader or kernel board initialization code. + +A consumer can determine if a regulator is enabled by calling :- + +int regulator_is_enabled(regulator); + +This will return > zero when the regulator is enabled. + + +A consumer can disable it's supply when no longer needed by calling :- + +int regulator_disable(regulator); + +NOTE: This may not disable the supply if it's shared with other consumers. The +regulator will only be disabled when the enabled reference count is zero. + +Finally, a regulator can be forcefully disabled in the case of an emergency :- + +int regulator_force_disable(regulator); + +NOTE: this will immediately and forcefully shutdown the regulator output. All +consumers will be powered off. + + +3. Regulator Voltage Control & Status (dynamic drivers) +====================================================== + +Some consumer drivers need to be able to dynamically change their supply +voltage to match system operating points. e.g. CPUfreq drivers can scale +voltage along with frequency to save power, SD drivers may need to select the +correct card voltage, etc. + +Consumers can control their supply voltage by calling :- + +int regulator_set_voltage(regulator, min_uV, max_uV); + +Where min_uV and max_uV are the minimum and maximum acceptable voltages in +microvolts. + +NOTE: this can be called when the regulator is enabled or disabled. If called +when enabled, then the voltage changes instantly, otherwise the voltage +configuration changes and the voltage is physically set when the regulator is +next enabled. + +The regulators configured voltage output can be found by calling :- + +int regulator_get_voltage(regulator); + +NOTE: get_voltage() will return the configured output voltage whether the +regulator is enabled or disabled and should NOT be used to determine regulator +output state. However this can be used in conjunction with is_enabled() to +determine the regulator physical output voltage. + + +4. Regulator Current Limit Control & Status (dynamic drivers) +=========================================================== + +Some consumer drivers need to be able to dynamically change their supply +current limit to match system operating points. e.g. LCD backlight driver can +change the current limit to vary the backlight brightness, USB drivers may want +to set the limit to 500mA when supplying power. + +Consumers can control their supply current limit by calling :- + +int regulator_set_current_limit(regulator, min_uV, max_uV); + +Where min_uA and max_uA are the minimum and maximum acceptable current limit in +microamps. + +NOTE: this can be called when the regulator is enabled or disabled. If called +when enabled, then the current limit changes instantly, otherwise the current +limit configuration changes and the current limit is physically set when the +regulator is next enabled. + +A regulators current limit can be found by calling :- + +int regulator_get_current_limit(regulator); + +NOTE: get_current_limit() will return the current limit whether the regulator +is enabled or disabled and should not be used to determine regulator current +load. + + +5. Regulator Operating Mode Control & Status (dynamic drivers) +============================================================= + +Some consumers can further save system power by changing the operating mode of +their supply regulator to be more efficient when the consumers operating state +changes. e.g. consumer driver is idle and subsequently draws less current + +Regulator operating mode can be changed indirectly or directly. + +Indirect operating mode control. +-------------------------------- +Consumer drivers can request a change in their supply regulator operating mode +by calling :- + +int regulator_set_optimum_mode(struct regulator *regulator, int load_uA); + +This will cause the core to recalculate the total load on the regulator (based +on all it's consumers) and change operating mode (if necessary and permitted) +to best match the current operating load. + +The load_uA value can be determined from the consumers datasheet. e.g.most +datasheets have tables showing the max current consumed in certain situations. + +Most consumers will use indirect operating mode control since they have no +knowledge of the regulator or whether the regulator is shared with other +consumers. + +Direct operating mode control. +------------------------------ +Bespoke or tightly coupled drivers may want to directly control regulator +operating mode depending on their operating point. This can be achieved by +calling :- + +int regulator_set_mode(struct regulator *regulator, unsigned int mode); +unsigned int regulator_get_mode(struct regulator *regulator); + +Direct mode will only be used by consumers that *know* about the regulator and +are not sharing the regulator with other consumers. + + +6. Regulator Events +=================== +Regulators can notify consumers of external events. Events could be received by +consumers under regulator stress or failure conditions. + +Consumers can register interest in regulator events by calling :- + +int regulator_register_notifier(struct regulator *regulator, + struct notifier_block *nb); + +Consumers can uregister interest by calling :- + +int regulator_unregister_notifier(struct regulator *regulator, + struct notifier_block *nb); + +Regulators use the kernel notifier framework to send event to thier interested +consumers. diff --git a/Documentation/power/regulator/machine.txt b/Documentation/power/regulator/machine.txt new file mode 100644 index 000000000000..c9a35665cf70 --- /dev/null +++ b/Documentation/power/regulator/machine.txt @@ -0,0 +1,101 @@ +Regulator Machine Driver Interface +=================================== + +The regulator machine driver interface is intended for board/machine specific +initialisation code to configure the regulator subsystem. Typical things that +machine drivers would do are :- + + 1. Regulator -> Device mapping. + 2. Regulator supply configuration. + 3. Power Domain constraint setting. + + + +1. Regulator -> device mapping +============================== +Consider the following machine :- + + Regulator-1 -+-> Regulator-2 --> [Consumer A @ 1.8 - 2.0V] + | + +-> [Consumer B @ 3.3V] + +The drivers for consumers A & B must be mapped to the correct regulator in +order to control their power supply. This mapping can be achieved in machine +initialisation code by calling :- + +int regulator_set_device_supply(const char *regulator, struct device *dev, + const char *supply); + +and is shown with the following code :- + +regulator_set_device_supply("Regulator-1", devB, "Vcc"); +regulator_set_device_supply("Regulator-2", devA, "Vcc"); + +This maps Regulator-1 to the 'Vcc' supply for Consumer B and maps Regulator-2 +to the 'Vcc' supply for Consumer A. + + +2. Regulator supply configuration. +================================== +Consider the following machine (again) :- + + Regulator-1 -+-> Regulator-2 --> [Consumer A @ 1.8 - 2.0V] + | + +-> [Consumer B @ 3.3V] + +Regulator-1 supplies power to Regulator-2. This relationship must be registered +with the core so that Regulator-1 is also enabled when Consumer A enables it's +supply (Regulator-2). + +This relationship can be register with the core via :- + +int regulator_set_supply(const char *regulator, const char *regulator_supply); + +In this example we would use the following code :- + +regulator_set_supply("Regulator-2", "Regulator-1"); + +Relationships can be queried by calling :- + +const char *regulator_get_supply(const char *regulator); + + +3. Power Domain constraint setting. +=================================== +Each power domain within a system has physical constraints on voltage and +current. This must be defined in software so that the power domain is always +operated within specifications. + +Consider the following machine (again) :- + + Regulator-1 -+-> Regulator-2 --> [Consumer A @ 1.8 - 2.0V] + | + +-> [Consumer B @ 3.3V] + +This gives us two regulators and two power domains: + + Domain 1: Regulator-2, Consumer B. + Domain 2: Consumer A. + +Constraints can be registered by calling :- + +int regulator_set_platform_constraints(const char *regulator, + struct regulation_constraints *constraints); + +The example is defined as follows :- + +struct regulation_constraints domain_1 = { + .min_uV = 3300000, + .max_uV = 3300000, + .valid_modes_mask = REGULATOR_MODE_NORMAL, +}; + +struct regulation_constraints domain_2 = { + .min_uV = 1800000, + .max_uV = 2000000, + .valid_ops_mask = REGULATOR_CHANGE_VOLTAGE, + .valid_modes_mask = REGULATOR_MODE_NORMAL, +}; + +regulator_set_platform_constraints("Regulator-1", &domain_1); +regulator_set_platform_constraints("Regulator-2", &domain_2); diff --git a/Documentation/power/regulator/overview.txt b/Documentation/power/regulator/overview.txt new file mode 100644 index 000000000000..bdcb332bd7fb --- /dev/null +++ b/Documentation/power/regulator/overview.txt @@ -0,0 +1,171 @@ +Linux voltage and current regulator framework +============================================= + +About +===== + +This framework is designed to provide a standard kernel interface to control +voltage and current regulators. + +The intention is to allow systems to dynamically control regulator power output +in order to save power and prolong battery life. This applies to both voltage +regulators (where voltage output is controllable) and current sinks (where +current limit is controllable). + +(C) 2008 Wolfson Microelectronics PLC. +Author: Liam Girdwood + + +Nomenclature +============ + +Some terms used in this document:- + + o Regulator - Electronic device that supplies power to other devices. + Most regulators can enable and disable their output whilst + some can control their output voltage and or current. + + Input Voltage -> Regulator -> Output Voltage + + + o PMIC - Power Management IC. An IC that contains numerous regulators + and often contains other susbsystems. + + + o Consumer - Electronic device that is supplied power by a regulator. + Consumers can be classified into two types:- + + Static: consumer does not change it's supply voltage or + current limit. It only needs to enable or disable it's + power supply. It's supply voltage is set by the hardware, + bootloader, firmware or kernel board initialisation code. + + Dynamic: consumer needs to change it's supply voltage or + current limit to meet operation demands. + + + o Power Domain - Electronic circuit that is supplied it's input power by the + output power of a regulator, switch or by another power + domain. + + The supply regulator may be behind a switch(s). i.e. + + Regulator -+-> Switch-1 -+-> Switch-2 --> [Consumer A] + | | + | +-> [Consumer B], [Consumer C] + | + +-> [Consumer D], [Consumer E] + + That is one regulator and three power domains: + + Domain 1: Switch-1, Consumers D & E. + Domain 2: Switch-2, Consumers B & C. + Domain 3: Consumer A. + + and this represents a "supplies" relationship: + + Domain-1 --> Domain-2 --> Domain-3. + + A power domain may have regulators that are supplied power + by other regulators. i.e. + + Regulator-1 -+-> Regulator-2 -+-> [Consumer A] + | + +-> [Consumer B] + + This gives us two regulators and two power domains: + + Domain 1: Regulator-2, Consumer B. + Domain 2: Consumer A. + + and a "supplies" relationship: + + Domain-1 --> Domain-2 + + + o Constraints - Constraints are used to define power levels for performance + and hardware protection. Constraints exist at three levels: + + Regulator Level: This is defined by the regulator hardware + operating parameters and is specified in the regulator + datasheet. i.e. + + - voltage output is in the range 800mV -> 3500mV. + - regulator current output limit is 20mA @ 5V but is + 10mA @ 10V. + + Power Domain Level: This is defined in software by kernel + level board initialisation code. It is used to constrain a + power domain to a particular power range. i.e. + + - Domain-1 voltage is 3300mV + - Domain-2 voltage is 1400mV -> 1600mV + - Domain-3 current limit is 0mA -> 20mA. + + Consumer Level: This is defined by consumer drivers + dynamically setting voltage or current limit levels. + + e.g. a consumer backlight driver asks for a current increase + from 5mA to 10mA to increase LCD illumination. This passes + to through the levels as follows :- + + Consumer: need to increase LCD brightness. Lookup and + request next current mA value in brightness table (the + consumer driver could be used on several different + personalities based upon the same reference device). + + Power Domain: is the new current limit within the domain + operating limits for this domain and system state (e.g. + battery power, USB power) + + Regulator Domains: is the new current limit within the + regulator operating parameters for input/ouput voltage. + + If the regulator request passes all the constraint tests + then the new regulator value is applied. + + +Design +====== + +The framework is designed and targeted at SoC based devices but may also be +relevant to non SoC devices and is split into the following four interfaces:- + + + 1. Consumer driver interface. + + This uses a similar API to the kernel clock interface in that consumer + drivers can get and put a regulator (like they can with clocks atm) and + get/set voltage, current limit, mode, enable and disable. This should + allow consumers complete control over their supply voltage and current + limit. This also compiles out if not in use so drivers can be reused in + systems with no regulator based power control. + + See Documentation/power/regulator/consumer.txt + + 2. Regulator driver interface. + + This allows regulator drivers to register their regulators and provide + operations to the core. It also has a notifier call chain for propagating + regulator events to clients. + + See Documentation/power/regulator/regulator.txt + + 3. Machine interface. + + This interface is for machine specific code and allows the creation of + voltage/current domains (with constraints) for each regulator. It can + provide regulator constraints that will prevent device damage through + overvoltage or over current caused by buggy client drivers. It also + allows the creation of a regulator tree whereby some regulators are + supplied by others (similar to a clock tree). + + See Documentation/power/regulator/machine.txt + + 4. Userspace ABI. + + The framework also exports a lot of useful voltage/current/opmode data to + userspace via sysfs. This could be used to help monitor device power + consumption and status. + + See Documentation/ABI/testing/regulator-sysfs.txt diff --git a/Documentation/power/regulator/regulator.txt b/Documentation/power/regulator/regulator.txt new file mode 100644 index 000000000000..a69050143592 --- /dev/null +++ b/Documentation/power/regulator/regulator.txt @@ -0,0 +1,30 @@ +Regulator Driver Interface +========================== + +The regulator driver interface is relatively simple and designed to allow +regulator drivers to register their services with the core framework. + + +Registration +============ + +Drivers can register a regulator by calling :- + +struct regulator_dev *regulator_register(struct regulator_desc *regulator_desc, + void *reg_data); + +This will register the regulators capabilities and operations the regulator +core. The core does not touch reg_data (private to regulator driver). + +Regulators can be unregistered by calling :- + +void regulator_unregister(struct regulator_dev *rdev); + + +Regulator Events +================ +Regulators can send events (e.g. over temp, under voltage, etc) to consumer +drivers by calling :- + +int regulator_notifier_call_chain(struct regulator_dev *rdev, + unsigned long event, void *data); diff --git a/Documentation/powerpc/00-INDEX b/Documentation/powerpc/00-INDEX index 3be84aa38dfe..29d839ce7327 100644 --- a/Documentation/powerpc/00-INDEX +++ b/Documentation/powerpc/00-INDEX @@ -20,8 +20,6 @@ mpc52xx-device-tree-bindings.txt - MPC5200 Device Tree Bindings ppc_htab.txt - info about the Linux/PPC /proc/ppc_htab entry -SBC8260_memory_mapping.txt - - EST SBC8260 board info smp.txt - use and state info about Linux/PPC on MP machines sound.txt diff --git a/Documentation/powerpc/SBC8260_memory_mapping.txt b/Documentation/powerpc/SBC8260_memory_mapping.txt deleted file mode 100644 index e6e9ee0506c3..000000000000 --- a/Documentation/powerpc/SBC8260_memory_mapping.txt +++ /dev/null @@ -1,197 +0,0 @@ -Please mail me (Jon Diekema, diekema_jon@si.com or diekema@cideas.com) -if you have questions, comments or corrections. - - * EST SBC8260 Linux memory mapping rules - - http://www.estc.com/ - http://www.estc.com/products/boards/SBC8260-8240_ds.html - - Initial conditions: - ------------------- - - Tasks that need to be perform by the boot ROM before control is - transferred to zImage (compressed Linux kernel): - - - Define the IMMR to 0xf0000000 - - - Initialize the memory controller so that RAM is available at - physical address 0x00000000. On the SBC8260 is this 16M (64M) - SDRAM. - - - The boot ROM should only clear the RAM that it is using. - - The reason for doing this is to enhances the chances of a - successful post mortem on a Linux panic. One of the first - items to examine is the 16k (LOG_BUF_LEN) circular console - buffer called log_buf which is defined in kernel/printk.c. - - - To enhance boot ROM performance, the I-cache can be enabled. - - Date: Mon, 22 May 2000 14:21:10 -0700 - From: Neil Russell - - LiMon (LInux MONitor) runs with and starts Linux with MMU - off, I-cache enabled, D-cache disabled. The I-cache doesn't - need hints from the MMU to work correctly as the D-cache - does. No D-cache means no special code to handle devices in - the presence of cache (no snooping, etc). The use of the - I-cache means that the monitor can run acceptably fast - directly from ROM, rather than having to copy it to RAM. - - - Build the board information structure (see - include/asm-ppc/est8260.h for its definition) - - - The compressed Linux kernel (zImage) contains a bootstrap loader - that is position independent; you can load it into any RAM, - ROM or FLASH memory address >= 0x00500000 (above 5 MB), or - at its link address of 0x00400000 (4 MB). - - Note: If zImage is loaded at its link address of 0x00400000 (4 MB), - then zImage will skip the step of moving itself to - its link address. - - - Load R3 with the address of the board information structure - - - Transfer control to zImage - - - The Linux console port is SMC1, and the baud rate is controlled - from the bi_baudrate field of the board information structure. - On thing to keep in mind when picking the baud rate, is that - there is no flow control on the SMC ports. I would stick - with something safe and standard like 19200. - - On the EST SBC8260, the SMC1 port is on the COM1 connector of - the board. - - - EST SBC8260 defaults: - --------------------- - - Chip - Memory Sel Bus Use - --------------------- --- --- ---------------------------------- - 0x00000000-0x03FFFFFF CS2 60x (16M or 64M)/64M SDRAM - 0x04000000-0x04FFFFFF CS4 local 4M/16M SDRAM (soldered to the board) - 0x21000000-0x21000000 CS7 60x 1B/64K Flash present detect (from the flash SIMM) - 0x21000001-0x21000001 CS7 60x 1B/64K Switches (read) and LEDs (write) - 0x22000000-0x2200FFFF CS5 60x 8K/64K EEPROM - 0xFC000000-0xFCFFFFFF CS6 60x 2M/16M flash (8 bits wide, soldered to the board) - 0xFE000000-0xFFFFFFFF CS0 60x 4M/16M flash (SIMM) - - Notes: - ------ - - - The chip selects can map 32K blocks and up (powers of 2) - - - The SDRAM machine can handled up to 128Mbytes per chip select - - - Linux uses the 60x bus memory (the SDRAM DIMM) for the - communications buffers. - - - BATs can map 128K-256Mbytes each. There are four data BATs and - four instruction BATs. Generally the data and instruction BATs - are mapped the same. - - - The IMMR must be set above the kernel virtual memory addresses, - which start at 0xC0000000. Otherwise, the kernel may crash as - soon as you start any threads or processes due to VM collisions - in the kernel or user process space. - - - Details from Dan Malek on 10/29/1999: - - The user application virtual space consumes the first 2 Gbytes - (0x00000000 to 0x7FFFFFFF). The kernel virtual text starts at - 0xC0000000, with data following. There is a "protection hole" - between the end of kernel data and the start of the kernel - dynamically allocated space, but this space is still within - 0xCxxxxxxx. - - Obviously the kernel can't map any physical addresses 1:1 in - these ranges. - - - Details from Dan Malek on 5/19/2000: - - During the early kernel initialization, the kernel virtual - memory allocator is not operational. Prior to this KVM - initialization, we choose to map virtual to physical addresses - 1:1. That is, the kernel virtual address exactly matches the - physical address on the bus. These mappings are typically done - in arch/ppc/kernel/head.S, or arch/ppc/mm/init.c. Only - absolutely necessary mappings should be done at this time, for - example board control registers or a serial uart. Normal device - driver initialization should map resources later when necessary. - - Although platform dependent, and certainly the case for embedded - 8xx, traditionally memory is mapped at physical address zero, - and I/O devices above physical address 0x80000000. The lowest - and highest (above 0xf0000000) I/O addresses are traditionally - used for devices or registers we need to map during kernel - initialization and prior to KVM operation. For this reason, - and since it followed prior PowerPC platform examples, I chose - to map the embedded 8xx kernel to the 0xc0000000 virtual address. - This way, we can enable the MMU to map the kernel for proper - operation, and still map a few windows before the KVM is operational. - - On some systems, you could possibly run the kernel at the - 0x80000000 or any other virtual address. It just depends upon - mapping that must be done prior to KVM operational. You can never - map devices or kernel spaces that overlap with the user virtual - space. This is why default IMMR mapping used by most BDM tools - won't work. They put the IMMR at something like 0x10000000 or - 0x02000000 for example. You simply can't map these addresses early - in the kernel, and continue proper system operation. - - The embedded 8xx/82xx kernel is mature enough that all you should - need to do is map the IMMR someplace at or above 0xf0000000 and it - should boot far enough to get serial console messages and KGDB - connected on any platform. There are lots of other subtle memory - management design features that you simply don't need to worry - about. If you are changing functions related to MMU initialization, - you are likely breaking things that are known to work and are - heading down a path of disaster and frustration. Your changes - should be to make the flexibility of the processor fit Linux, - not force arbitrary and non-workable memory mappings into Linux. - - - You don't want to change KERNELLOAD or KERNELBASE, otherwise the - virtual memory and MMU code will get confused. - - arch/ppc/Makefile:KERNELLOAD = 0xc0000000 - - include/asm-ppc/page.h:#define PAGE_OFFSET 0xc0000000 - include/asm-ppc/page.h:#define KERNELBASE PAGE_OFFSET - - - RAM is at physical address 0x00000000, and gets mapped to - virtual address 0xC0000000 for the kernel. - - - Physical addresses used by the Linux kernel: - -------------------------------------------- - - 0x00000000-0x3FFFFFFF 1GB reserved for RAM - 0xF0000000-0xF001FFFF 128K IMMR 64K used for dual port memory, - 64K for 8260 registers - - - Logical addresses used by the Linux kernel: - ------------------------------------------- - - 0xF0000000-0xFFFFFFFF 256M BAT0 (IMMR: dual port RAM, registers) - 0xE0000000-0xEFFFFFFF 256M BAT1 (I/O space for custom boards) - 0xC0000000-0xCFFFFFFF 256M BAT2 (RAM) - 0xD0000000-0xDFFFFFFF 256M BAT3 (if RAM > 256MByte) - - - EST SBC8260 Linux mapping: - -------------------------- - - DBAT0, IBAT0, cache inhibited: - - Chip - Memory Sel Use - --------------------- --- --------------------------------- - 0xF0000000-0xF001FFFF n/a IMMR: dual port RAM, registers - - DBAT1, IBAT1, cache inhibited: - diff --git a/Documentation/powerpc/booting-without-of.txt b/Documentation/powerpc/booting-without-of.txt index 928a79ceb7aa..de4063cb4fdc 100644 --- a/Documentation/powerpc/booting-without-of.txt +++ b/Documentation/powerpc/booting-without-of.txt @@ -278,7 +278,7 @@ it with special cases. a 64-bit platform. d) request and get assigned a platform number (see PLATFORM_* - constants in include/asm-powerpc/processor.h + constants in arch/powerpc/include/asm/processor.h 32-bit embedded kernels: @@ -340,7 +340,7 @@ the block to RAM before passing it to the kernel. --------- The kernel is entered with r3 pointing to an area of memory that is - roughly described in include/asm-powerpc/prom.h by the structure + roughly described in arch/powerpc/include/asm/prom.h by the structure boot_param_header: struct boot_param_header { diff --git a/Documentation/powerpc/dts-bindings/fsl/cpm_qe/serial.txt b/Documentation/powerpc/dts-bindings/fsl/cpm_qe/serial.txt index b35f3482e3e4..2ea76d9d137c 100644 --- a/Documentation/powerpc/dts-bindings/fsl/cpm_qe/serial.txt +++ b/Documentation/powerpc/dts-bindings/fsl/cpm_qe/serial.txt @@ -7,6 +7,15 @@ Currently defined compatibles: - fsl,cpm2-scc-uart - fsl,qe-uart +Modem control lines connected to GPIO controllers are listed in the gpios +property as described in booting-without-of.txt, section IX.1 in the following +order: + +CTS, RTS, DCD, DSR, DTR, and RI. + +The gpios property is optional and can be left out when control lines are +not used. + Example: serial@11a00 { @@ -18,4 +27,6 @@ Example: interrupt-parent = <&PIC>; fsl,cpm-brg = <1>; fsl,cpm-command = <00800000>; + gpios = <&gpio_c 15 0 + &gpio_d 29 0>; }; diff --git a/Documentation/powerpc/eeh-pci-error-recovery.txt b/Documentation/powerpc/eeh-pci-error-recovery.txt index df7afe43d462..9d4e33df624c 100644 --- a/Documentation/powerpc/eeh-pci-error-recovery.txt +++ b/Documentation/powerpc/eeh-pci-error-recovery.txt @@ -133,7 +133,7 @@ error. Given an arbitrary address, the routine pci_get_device_by_addr() will find the pci device associated with that address (if any). -The default include/asm-powerpc/io.h macros readb(), inb(), insb(), +The default arch/powerpc/include/asm/io.h macros readb(), inb(), insb(), etc. include a check to see if the i/o read returned all-0xff's. If so, these make a call to eeh_dn_check_failure(), which in turn asks the firmware if the all-ff's value is the sign of a true EEH diff --git a/Documentation/rfkill.txt b/Documentation/rfkill.txt index 0843ed0163a5..28b6ec87c642 100644 --- a/Documentation/rfkill.txt +++ b/Documentation/rfkill.txt @@ -390,9 +390,10 @@ rfkill lines are inactive, it must return RFKILL_STATE_SOFT_BLOCKED if its soft rfkill input line is active. Only if none of the rfkill input lines are active, will it return RFKILL_STATE_UNBLOCKED. -If it doesn't implement the get_state() hook, it must make sure that its calls -to rfkill_force_state() are enough to keep the status always up-to-date, and it -must do a rfkill_force_state() on resume from sleep. +Since the device has a hardware rfkill line, it IS subject to state changes +external to rfkill. Therefore, the driver must make sure that it calls +rfkill_force_state() to keep the status always up-to-date, and it must do a +rfkill_force_state() on resume from sleep. Every time the driver gets a notification from the card that one of its rfkill lines changed state (polling might be needed on badly designed cards that don't @@ -422,13 +423,24 @@ of the hardware is unknown), or read-write (where the hardware can be queried about its current state). The rfkill class will call the get_state hook of a device every time it needs -to know the *real* current state of the hardware. This can happen often. +to know the *real* current state of the hardware. This can happen often, but +it does not do any polling, so it is not enough on hardware that is subject +to state changes outside of the rfkill subsystem. + +Therefore, calling rfkill_force_state() when a state change happens is +mandatory when the device has a hardware rfkill line, or when something else +like the firmware could cause its state to be changed without going through the +rfkill class. Some hardware provides events when its status changes. In these cases, it is best for the driver to not provide a get_state hook, and instead register the rfkill class *already* with the correct status, and keep it updated using rfkill_force_state() when it gets an event from the hardware. +rfkill_force_state() must be used on the device resume handlers to update the +rfkill status, should there be any chance of the device status changing during +the sleep. + There is no provision for a statically-allocated rfkill struct. You must use rfkill_allocate() to allocate one. diff --git a/Documentation/spi/pxa2xx b/Documentation/spi/pxa2xx index f3853cc37bde..bbe8dee681a5 100644 --- a/Documentation/spi/pxa2xx +++ b/Documentation/spi/pxa2xx @@ -19,7 +19,7 @@ Declaring PXA2xx Master Controllers ----------------------------------- Typically a SPI master is defined in the arch/.../mach-*/board-*.c as a "platform device". The master configuration is passed to the driver via a table -found in include/asm-arm/arch-pxa/pxa2xx_spi.h: +found in arch/arm/mach-pxa/include/mach/pxa2xx_spi.h: struct pxa2xx_spi_master { enum pxa_ssp_type ssp_type; @@ -94,7 +94,7 @@ using the "spi_board_info" structure found in "linux/spi/spi.h". See Each slave device attached to the PXA must provide slave specific configuration information via the structure "pxa2xx_spi_chip" found in -"include/asm-arm/arch-pxa/pxa2xx_spi.h". The pxa2xx_spi master controller driver +"arch/arm/mach-pxa/include/mach/pxa2xx_spi.h". The pxa2xx_spi master controller driver will uses the configuration whenever the driver communicates with the slave device. diff --git a/Documentation/spi/spi-summary b/Documentation/spi/spi-summary index 6d5f18143c50..8bae2f018d34 100644 --- a/Documentation/spi/spi-summary +++ b/Documentation/spi/spi-summary @@ -210,7 +210,7 @@ board should normally be set up and registered. So for example arch/.../mach-*/board-*.c files might have code like: - #include /* for mysoc_spi_data */ + #include /* for mysoc_spi_data */ /* if your mach-* infrastructure doesn't support kernels that can * run on multiple boards, pdata wouldn't benefit from "__init". @@ -227,7 +227,7 @@ So for example arch/.../mach-*/board-*.c files might have code like: And SOC-specific utility code might look something like: - #include + #include static struct platform_device spi2 = { ... }; diff --git a/Documentation/video4linux/gspca.txt b/Documentation/video4linux/gspca.txt index bcaf4ab383be..78a863ab8a5a 100644 --- a/Documentation/video4linux/gspca.txt +++ b/Documentation/video4linux/gspca.txt @@ -226,6 +226,7 @@ sonixj 0c45:6130 Sonix Pccam sonixj 0c45:6138 Sn9c120 Mo4000 sonixj 0c45:613b Surfer SN-206 sonixj 0c45:613c Sonix Pccam168 +sonixj 0c45:6143 Sonix Pccam168 sunplus 0d64:0303 Sunplus FashionCam DXG etoms 102c:6151 Qcam Sangha CIF etoms 102c:6251 Qcam xxxxxx VGA diff --git a/MAINTAINERS b/MAINTAINERS index deedc0d827b5..41d7a1ed03d1 100644 --- a/MAINTAINERS +++ b/MAINTAINERS @@ -502,6 +502,12 @@ L: openezx-devel@lists.openezx.org (subscribers-only) W: http://www.openezx.org/ S: Maintained +ARM/FREESCALE IMX / MXC ARM ARCHITECTURE +P: Sascha Hauer +M: kernel@pengutronix.de +L: linux-arm-kernel@lists.arm.linux.org.uk (subscribers-only) +S: Maintained + ARM/GLOMATION GESBC9312SX MACHINE SUPPORT P: Lennert Buytenhek M: kernel@wantstofly.org @@ -588,6 +594,11 @@ M: kernel@wantstofly.org L: linux-arm-kernel@lists.arm.linux.org.uk (subscribers-only) S: Maintained +ARM/MAGICIAN MACHINE SUPPORT +P: Philipp Zabel +M: philipp.zabel@gmail.com +S: Maintained + ARM/TOSA MACHINE SUPPORT P: Dmitry Baryshkov M: dbaryshkov@gmail.com @@ -714,6 +725,15 @@ L: linux-wireless@vger.kernel.org L: ath5k-devel@lists.ath5k.org S: Maintained +ATHEROS ATH9K WIRELESS DRIVER +P: Luis R. Rodriguez +M: lrodriguez@atheros.com +P: Jouni Malinen +M: jmalinen@atheros.com +L: linux-wireless@vger.kernel.org +L: ath9k-devel@lists.ath9k.org +S: Supported + ATI_REMOTE2 DRIVER P: Ville Syrjala M: syrjala@sci.fi @@ -1229,7 +1249,7 @@ S: Maintained CPU FREQUENCY DRIVERS P: Dave Jones M: davej@codemonkey.org.uk -L: cpufreq@lists.linux.org.uk +L: cpufreq@vger.kernel.org W: http://www.codemonkey.org.uk/projects/cpufreq/ T: git kernel.org/pub/scm/linux/kernel/git/davej/cpufreq.git S: Maintained @@ -1878,13 +1898,9 @@ W: http://gigaset307x.sourceforge.net/ S: Maintained HARDWARE MONITORING -P: Mark M. Hoffman -M: mhoffman@lightlink.com L: lm-sensors@lm-sensors.org W: http://www.lm-sensors.org/ -T: git lm-sensors.org:/kernel/mhoffman/hwmon-2.6.git testing -T: git lm-sensors.org:/kernel/mhoffman/hwmon-2.6.git release -S: Maintained +S: Orphaned HARDWARE RANDOM NUMBER GENERATOR CORE S: Orphaned @@ -3968,7 +3984,7 @@ M: lethal@linux-sh.org L: linux-sh@vger.kernel.org W: http://www.linux-sh.org T: git kernel.org:/pub/scm/linux/kernel/git/lethal/sh-2.6.git -S: Maintained +S: Supported SUN3/3X P: Sam Creasey @@ -4504,6 +4520,15 @@ M: kaber@trash.net L: netdev@vger.kernel.org S: Maintained +VOLTAGE AND CURRENT REGULATOR FRAMEWORK +P: Liam Girdwood +M: lg@opensource.wolfsonmicro.com +P: Mark Brown +M: broonie@opensource.wolfsonmicro.com +W: http://opensource.wolfsonmicro.com/node/15 +T: git kernel.org/pub/scm/linux/kernel/git/lrg/voltage-2.6.git +S: Supported + VT1211 HARDWARE MONITOR DRIVER P: Juerg Haefliger M: juergh@gmail.com diff --git a/Makefile b/Makefile index aa527a46c807..f3e206509ee1 100644 --- a/Makefile +++ b/Makefile @@ -1,7 +1,7 @@ VERSION = 2 PATCHLEVEL = 6 SUBLEVEL = 27 -EXTRAVERSION = -rc1 +EXTRAVERSION = -rc2 NAME = Rotary Wombat # *DOCUMENTATION* @@ -929,10 +929,10 @@ ifneq ($(KBUILD_SRC),) echo " in the '$(srctree)' directory.";\ /bin/false; \ fi; - $(Q)if [ ! -d include2 ]; then mkdir -p include2; fi; - $(Q)if [ -e $(srctree)/include/asm-$(SRCARCH)/system.h ]; then \ + $(Q)if [ ! -d include2 ]; then \ + mkdir -p include2; \ ln -fsn $(srctree)/include/asm-$(SRCARCH) include2/asm; \ - fi + fi endif # prepare2 creates a makefile if using a separate output directory @@ -1492,7 +1492,7 @@ quiet_cmd_cscope-file = FILELST cscope.files cmd_cscope-file = (echo \-k; echo \-q; $(all-sources)) > cscope.files quiet_cmd_cscope = MAKE cscope.out - cmd_cscope = cscope -b + cmd_cscope = cscope -b -f cscope.out cscope: FORCE $(call cmd,cscope-file) diff --git a/arch/arm/Kconfig b/arch/arm/Kconfig index 257033c691f2..4b8acd2851f4 100644 --- a/arch/arm/Kconfig +++ b/arch/arm/Kconfig @@ -1225,6 +1225,8 @@ source "drivers/dma/Kconfig" source "drivers/dca/Kconfig" +source "drivers/regulator/Kconfig" + source "drivers/uio/Kconfig" endmenu diff --git a/arch/arm/Makefile b/arch/arm/Makefile index 2f0747744236..703a44fa0f9b 100644 --- a/arch/arm/Makefile +++ b/arch/arm/Makefile @@ -97,9 +97,7 @@ textofs-y := 0x00008000 machine-$(CONFIG_ARCH_RPC) := rpc machine-$(CONFIG_ARCH_EBSA110) := ebsa110 machine-$(CONFIG_ARCH_CLPS7500) := clps7500 - incdir-$(CONFIG_ARCH_CLPS7500) := cl7500 machine-$(CONFIG_FOOTBRIDGE) := footbridge - incdir-$(CONFIG_FOOTBRIDGE) := ebsa285 machine-$(CONFIG_ARCH_SHARK) := shark machine-$(CONFIG_ARCH_SA1100) := sa1100 ifeq ($(CONFIG_ARCH_SA1100),y) @@ -114,13 +112,15 @@ endif machine-$(CONFIG_ARCH_IOP32X) := iop32x machine-$(CONFIG_ARCH_IOP33X) := iop33x machine-$(CONFIG_ARCH_IOP13XX) := iop13xx + plat-$(CONFIG_PLAT_IOP) := iop machine-$(CONFIG_ARCH_IXP4XX) := ixp4xx machine-$(CONFIG_ARCH_IXP2000) := ixp2000 machine-$(CONFIG_ARCH_IXP23XX) := ixp23xx machine-$(CONFIG_ARCH_OMAP1) := omap1 machine-$(CONFIG_ARCH_OMAP2) := omap2 - incdir-$(CONFIG_ARCH_OMAP) := omap - machine-$(CONFIG_ARCH_S3C2410) := s3c2410 + plat-$(CONFIG_ARCH_OMAP) := omap + machine-$(CONFIG_ARCH_S3C2410) := s3c2410 s3c2400 s3c2412 s3c2440 s3c2442 s3c2443 + plat-$(CONFIG_PLAT_S3C24XX) := s3c24xx machine-$(CONFIG_ARCH_LH7A40X) := lh7a40x machine-$(CONFIG_ARCH_VERSATILE) := versatile machine-$(CONFIG_ARCH_IMX) := imx @@ -135,10 +135,11 @@ endif machine-$(CONFIG_ARCH_DAVINCI) := davinci machine-$(CONFIG_ARCH_KIRKWOOD) := kirkwood machine-$(CONFIG_ARCH_KS8695) := ks8695 - incdir-$(CONFIG_ARCH_MXC) := mxc + plat-$(CONFIG_ARCH_MXC) := mxc machine-$(CONFIG_ARCH_MX2) := mx2 machine-$(CONFIG_ARCH_MX3) := mx3 machine-$(CONFIG_ARCH_ORION5X) := orion5x + plat-$(CONFIG_PLAT_ORION) := orion machine-$(CONFIG_ARCH_MSM7X00A) := msm machine-$(CONFIG_ARCH_LOKI) := loki machine-$(CONFIG_ARCH_MV78XX0) := mv78xx0 @@ -153,17 +154,22 @@ endif # The byte offset of the kernel image in RAM from the start of RAM. TEXT_OFFSET := $(textofs-y) -ifeq ($(incdir-y),) -incdir-y := $(machine-y) -endif -INCDIR := arch-$(incdir-y) - +# The first directory contains additional information for the boot setup code ifneq ($(machine-y),) -MACHINE := arch/arm/mach-$(machine-y)/ +MACHINE := arch/arm/mach-$(word 1,$(machine-y))/ else MACHINE := endif +machdirs := $(patsubst %,arch/arm/mach-%/,$(machine-y)) +platdirs := $(patsubst %,arch/arm/plat-%/,$(plat-y)) + +ifeq ($(KBUILD_SRC),) +KBUILD_CPPFLAGS += $(patsubst %,-I%include,$(machdirs) $(platdirs)) +else +KBUILD_CPPFLAGS += $(patsubst %,-I$(srctree)/%include,$(machdirs) $(platdirs)) +endif + export TEXT_OFFSET GZFLAGS MMUEXT # Do we have FASTFPE? @@ -174,23 +180,11 @@ endif # If we have a machine-specific directory, then include it in the build. core-y += arch/arm/kernel/ arch/arm/mm/ arch/arm/common/ -core-y += $(MACHINE) -core-$(CONFIG_ARCH_S3C2410) += arch/arm/mach-s3c2400/ -core-$(CONFIG_ARCH_S3C2410) += arch/arm/mach-s3c2412/ -core-$(CONFIG_ARCH_S3C2410) += arch/arm/mach-s3c2440/ -core-$(CONFIG_ARCH_S3C2410) += arch/arm/mach-s3c2442/ -core-$(CONFIG_ARCH_S3C2410) += arch/arm/mach-s3c2443/ +core-y += $(machdirs) $(platdirs) core-$(CONFIG_FPE_NWFPE) += arch/arm/nwfpe/ core-$(CONFIG_FPE_FASTFPE) += $(FASTFPE_OBJ) core-$(CONFIG_VFP) += arch/arm/vfp/ -# If we have a common platform directory, then include it in the build. -core-$(CONFIG_PLAT_IOP) += arch/arm/plat-iop/ -core-$(CONFIG_PLAT_ORION) += arch/arm/plat-orion/ -core-$(CONFIG_ARCH_OMAP) += arch/arm/plat-omap/ -core-$(CONFIG_PLAT_S3C24XX) += arch/arm/plat-s3c24xx/ -core-$(CONFIG_ARCH_MXC) += arch/arm/plat-mxc/ - drivers-$(CONFIG_OPROFILE) += arch/arm/oprofile/ libs-y := arch/arm/lib/ $(libs-y) @@ -210,20 +204,10 @@ boot := arch/arm/boot # them changed. We use .arch to indicate when they were updated # last, otherwise make uses the target directory mtime. -include/asm-arm/.arch: $(wildcard include/config/arch/*.h) include/config/auto.conf - @echo ' SYMLINK include/asm-arm/arch -> include/asm-arm/$(INCDIR)' -ifneq ($(KBUILD_SRC),) - $(Q)mkdir -p include/asm-arm - $(Q)ln -fsn $(srctree)/include/asm-arm/$(INCDIR) include/asm-arm/arch -else - $(Q)ln -fsn $(INCDIR) include/asm-arm/arch -endif - @touch $@ - archprepare: maketools PHONY += maketools FORCE -maketools: include/linux/version.h include/asm-arm/.arch FORCE +maketools: include/linux/version.h FORCE $(Q)$(MAKE) $(build)=arch/arm/tools include/asm-arm/mach-types.h # Convert bzImage to zImage diff --git a/arch/arm/boot/compressed/Makefile b/arch/arm/boot/compressed/Makefile index 95baac4939e0..94462a097f86 100644 --- a/arch/arm/boot/compressed/Makefile +++ b/arch/arm/boot/compressed/Makefile @@ -112,6 +112,3 @@ $(obj)/font.c: $(FONTC) $(obj)/vmlinux.lds: $(obj)/vmlinux.lds.in arch/arm/boot/Makefile .config @sed "$(SEDFLAGS)" < $< > $@ - -$(obj)/misc.o: $(obj)/misc.c include/asm/arch/uncompress.h lib/inflate.c - diff --git a/arch/arm/boot/compressed/head-xscale.S b/arch/arm/boot/compressed/head-xscale.S index dd3fbd6766e1..aa5ee49c5c5a 100644 --- a/arch/arm/boot/compressed/head-xscale.S +++ b/arch/arm/boot/compressed/head-xscale.S @@ -6,7 +6,6 @@ */ #include -#include .section ".start", "ax" diff --git a/arch/arm/boot/compressed/head.S b/arch/arm/boot/compressed/head.S index de41daeab5e9..d42f89b7760b 100644 --- a/arch/arm/boot/compressed/head.S +++ b/arch/arm/boot/compressed/head.S @@ -37,7 +37,7 @@ #else -#include +#include .macro writeb, ch, rb senduart \ch, \rb diff --git a/arch/arm/boot/compressed/misc.c b/arch/arm/boot/compressed/misc.c index 7145cc7c04f0..65ce8fff29db 100644 --- a/arch/arm/boot/compressed/misc.c +++ b/arch/arm/boot/compressed/misc.c @@ -27,7 +27,7 @@ unsigned int __machine_arch_type; static void putstr(const char *ptr); #include -#include +#include #ifdef CONFIG_DEBUG_ICEDCC diff --git a/arch/arm/common/locomo.c b/arch/arm/common/locomo.c index 85579654d3b7..283051eaf931 100644 --- a/arch/arm/common/locomo.c +++ b/arch/arm/common/locomo.c @@ -25,7 +25,7 @@ #include #include -#include +#include #include #include #include diff --git a/arch/arm/common/sa1111.c b/arch/arm/common/sa1111.c index f6d3fdda7067..ec8a5471bf06 100644 --- a/arch/arm/common/sa1111.c +++ b/arch/arm/common/sa1111.c @@ -26,7 +26,7 @@ #include #include -#include +#include #include #include #include diff --git a/arch/arm/common/sharpsl_pm.c b/arch/arm/common/sharpsl_pm.c index 8822b684d474..db8309161408 100644 --- a/arch/arm/common/sharpsl_pm.c +++ b/arch/arm/common/sharpsl_pm.c @@ -26,13 +26,12 @@ #include #include -#include -#include +#include #include -#include -#include -#include -#include +#include +#include +#include +#include #include /* diff --git a/arch/arm/common/time-acorn.c b/arch/arm/common/time-acorn.c index d544da414731..df0983aafe69 100644 --- a/arch/arm/common/time-acorn.c +++ b/arch/arm/common/time-acorn.c @@ -18,7 +18,7 @@ #include #include -#include +#include #include #include diff --git a/arch/arm/common/uengine.c b/arch/arm/common/uengine.c index 117cab30bd36..7ecd3c0ab011 100644 --- a/arch/arm/common/uengine.c +++ b/arch/arm/common/uengine.c @@ -16,8 +16,7 @@ #include #include #include -#include -#include +#include #include #include diff --git a/arch/arm/configs/at91cap9adk_defconfig b/arch/arm/configs/at91cap9adk_defconfig index be2b2f38fd94..bf97801a1068 100644 --- a/arch/arm/configs/at91cap9adk_defconfig +++ b/arch/arm/configs/at91cap9adk_defconfig @@ -170,7 +170,7 @@ CONFIG_MACH_AT91CAP9ADK=y # AT91 Board Options # CONFIG_MTD_AT91_DATAFLASH_CARD=y -# CONFIG_MTD_NAND_AT91_BUSWIDTH_16 is not set +# CONFIG_MTD_NAND_ATMEL_BUSWIDTH_16 is not set # # AT91 Feature Selections @@ -442,7 +442,7 @@ CONFIG_MTD_NAND=y # CONFIG_MTD_NAND_MUSEUM_IDS is not set CONFIG_MTD_NAND_IDS=y # CONFIG_MTD_NAND_DISKONCHIP is not set -CONFIG_MTD_NAND_AT91=y +CONFIG_MTD_NAND_ATMEL=y # CONFIG_MTD_NAND_NANDSIM is not set # CONFIG_MTD_NAND_PLATFORM is not set # CONFIG_MTD_ALAUDA is not set diff --git a/arch/arm/configs/at91sam9260ek_defconfig b/arch/arm/configs/at91sam9260ek_defconfig index 2011adfa6758..38e6a0abeb4e 100644 --- a/arch/arm/configs/at91sam9260ek_defconfig +++ b/arch/arm/configs/at91sam9260ek_defconfig @@ -176,7 +176,7 @@ CONFIG_MACH_AT91SAM9260EK=y # AT91 Board Options # # CONFIG_MTD_AT91_DATAFLASH_CARD is not set -# CONFIG_MTD_NAND_AT91_BUSWIDTH_16 is not set +# CONFIG_MTD_NAND_ATMEL_BUSWIDTH_16 is not set # # AT91 Feature Selections diff --git a/arch/arm/configs/at91sam9261ek_defconfig b/arch/arm/configs/at91sam9261ek_defconfig index 4049768962d2..93b779f94b41 100644 --- a/arch/arm/configs/at91sam9261ek_defconfig +++ b/arch/arm/configs/at91sam9261ek_defconfig @@ -169,7 +169,7 @@ CONFIG_MACH_AT91SAM9261EK=y # AT91 Board Options # # CONFIG_MTD_AT91_DATAFLASH_CARD is not set -# CONFIG_MTD_NAND_AT91_BUSWIDTH_16 is not set +# CONFIG_MTD_NAND_ATMEL_BUSWIDTH_16 is not set # # AT91 Feature Selections @@ -433,7 +433,7 @@ CONFIG_MTD_NAND=y # CONFIG_MTD_NAND_MUSEUM_IDS is not set CONFIG_MTD_NAND_IDS=y # CONFIG_MTD_NAND_DISKONCHIP is not set -CONFIG_MTD_NAND_AT91=y +CONFIG_MTD_NAND_ATMEL=y # CONFIG_MTD_NAND_NANDSIM is not set # CONFIG_MTD_NAND_PLATFORM is not set # CONFIG_MTD_ALAUDA is not set diff --git a/arch/arm/configs/at91sam9263ek_defconfig b/arch/arm/configs/at91sam9263ek_defconfig index fa1c5aecb5a8..a7ddd94363ca 100644 --- a/arch/arm/configs/at91sam9263ek_defconfig +++ b/arch/arm/configs/at91sam9263ek_defconfig @@ -169,7 +169,7 @@ CONFIG_MACH_AT91SAM9263EK=y # AT91 Board Options # CONFIG_MTD_AT91_DATAFLASH_CARD=y -# CONFIG_MTD_NAND_AT91_BUSWIDTH_16 is not set +# CONFIG_MTD_NAND_ATMEL_BUSWIDTH_16 is not set # # AT91 Feature Selections @@ -428,7 +428,7 @@ CONFIG_MTD_NAND=y # CONFIG_MTD_NAND_MUSEUM_IDS is not set CONFIG_MTD_NAND_IDS=y # CONFIG_MTD_NAND_DISKONCHIP is not set -CONFIG_MTD_NAND_AT91=y +CONFIG_MTD_NAND_ATMEL=y # CONFIG_MTD_NAND_NANDSIM is not set # CONFIG_MTD_NAND_PLATFORM is not set # CONFIG_MTD_ALAUDA is not set diff --git a/arch/arm/configs/at91sam9g20ek_defconfig b/arch/arm/configs/at91sam9g20ek_defconfig index c06863847364..df0d6ee672b3 100644 --- a/arch/arm/configs/at91sam9g20ek_defconfig +++ b/arch/arm/configs/at91sam9g20ek_defconfig @@ -168,7 +168,7 @@ CONFIG_MACH_AT91SAM9G20EK=y # AT91 Board Options # # CONFIG_MTD_AT91_DATAFLASH_CARD is not set -# CONFIG_MTD_NAND_AT91_BUSWIDTH_16 is not set +# CONFIG_MTD_NAND_ATMEL_BUSWIDTH_16 is not set # # AT91 Feature Selections @@ -442,10 +442,10 @@ CONFIG_MTD_NAND=y # CONFIG_MTD_NAND_MUSEUM_IDS is not set CONFIG_MTD_NAND_IDS=y # CONFIG_MTD_NAND_DISKONCHIP is not set -CONFIG_MTD_NAND_AT91=y -CONFIG_MTD_NAND_AT91_ECC_SOFT=y -# CONFIG_MTD_NAND_AT91_ECC_HW is not set -# CONFIG_MTD_NAND_AT91_ECC_NONE is not set +CONFIG_MTD_NAND_ATMEL=y +CONFIG_MTD_NAND_ATMEL_ECC_SOFT=y +# CONFIG_MTD_NAND_ATMEL_ECC_HW is not set +# CONFIG_MTD_NAND_ATMEL_ECC_NONE is not set # CONFIG_MTD_NAND_NANDSIM is not set # CONFIG_MTD_NAND_PLATFORM is not set # CONFIG_MTD_ALAUDA is not set diff --git a/arch/arm/configs/at91sam9rlek_defconfig b/arch/arm/configs/at91sam9rlek_defconfig index d8ec5f9ca6ec..1c76642272a1 100644 --- a/arch/arm/configs/at91sam9rlek_defconfig +++ b/arch/arm/configs/at91sam9rlek_defconfig @@ -392,7 +392,7 @@ CONFIG_MTD_NAND=y # CONFIG_MTD_NAND_MUSEUM_IDS is not set CONFIG_MTD_NAND_IDS=y # CONFIG_MTD_NAND_DISKONCHIP is not set -CONFIG_MTD_NAND_AT91=y +CONFIG_MTD_NAND_ATMEL=y # CONFIG_MTD_NAND_NANDSIM is not set # CONFIG_MTD_NAND_PLATFORM is not set # CONFIG_MTD_ONENAND is not set diff --git a/arch/arm/configs/cam60_defconfig b/arch/arm/configs/cam60_defconfig index f3cd4a95373a..f945105d6cd6 100644 --- a/arch/arm/configs/cam60_defconfig +++ b/arch/arm/configs/cam60_defconfig @@ -466,10 +466,10 @@ CONFIG_MTD_NAND_VERIFY_WRITE=y # CONFIG_MTD_NAND_MUSEUM_IDS is not set CONFIG_MTD_NAND_IDS=y # CONFIG_MTD_NAND_DISKONCHIP is not set -CONFIG_MTD_NAND_AT91=y -# CONFIG_MTD_NAND_AT91_ECC_SOFT is not set -CONFIG_MTD_NAND_AT91_ECC_HW=y -# CONFIG_MTD_NAND_AT91_ECC_NONE is not set +CONFIG_MTD_NAND_ATMEL=y +# CONFIG_MTD_NAND_ATMEL_ECC_SOFT is not set +CONFIG_MTD_NAND_ATMEL_ECC_HW=y +# CONFIG_MTD_NAND_ATMEL_ECC_NONE is not set # CONFIG_MTD_NAND_NANDSIM is not set # CONFIG_MTD_NAND_PLATFORM is not set # CONFIG_MTD_ALAUDA is not set diff --git a/arch/arm/configs/qil-a9260_defconfig b/arch/arm/configs/qil-a9260_defconfig index ef903bed061e..5cbd81589647 100644 --- a/arch/arm/configs/qil-a9260_defconfig +++ b/arch/arm/configs/qil-a9260_defconfig @@ -458,10 +458,10 @@ CONFIG_MTD_NAND=y # CONFIG_MTD_NAND_MUSEUM_IDS is not set CONFIG_MTD_NAND_IDS=y # CONFIG_MTD_NAND_DISKONCHIP is not set -CONFIG_MTD_NAND_AT91=y -CONFIG_MTD_NAND_AT91_ECC_SOFT=y -# CONFIG_MTD_NAND_AT91_ECC_HW is not set -# CONFIG_MTD_NAND_AT91_ECC_NONE is not set +CONFIG_MTD_NAND_ATMEL=y +CONFIG_MTD_NAND_ATMEL_ECC_SOFT=y +# CONFIG_MTD_NAND_ATMEL_ECC_HW is not set +# CONFIG_MTD_NAND_ATMEL_ECC_NONE is not set # CONFIG_MTD_NAND_NANDSIM is not set # CONFIG_MTD_NAND_PLATFORM is not set # CONFIG_MTD_ALAUDA is not set diff --git a/arch/arm/configs/sam9_l9260_defconfig b/arch/arm/configs/sam9_l9260_defconfig index 8688362bcf7b..1174e2764875 100644 --- a/arch/arm/configs/sam9_l9260_defconfig +++ b/arch/arm/configs/sam9_l9260_defconfig @@ -429,7 +429,7 @@ CONFIG_MTD_NAND=y # CONFIG_MTD_NAND_MUSEUM_IDS is not set CONFIG_MTD_NAND_IDS=y # CONFIG_MTD_NAND_DISKONCHIP is not set -CONFIG_MTD_NAND_AT91=y +CONFIG_MTD_NAND_ATMEL=y # CONFIG_MTD_NAND_NANDSIM is not set CONFIG_MTD_NAND_PLATFORM=y # CONFIG_MTD_ONENAND is not set diff --git a/arch/arm/configs/usb-a9260_defconfig b/arch/arm/configs/usb-a9260_defconfig index 3680bd2df26d..fcb4aaabd439 100644 --- a/arch/arm/configs/usb-a9260_defconfig +++ b/arch/arm/configs/usb-a9260_defconfig @@ -458,10 +458,10 @@ CONFIG_MTD_NAND=y # CONFIG_MTD_NAND_MUSEUM_IDS is not set CONFIG_MTD_NAND_IDS=y # CONFIG_MTD_NAND_DISKONCHIP is not set -CONFIG_MTD_NAND_AT91=y -CONFIG_MTD_NAND_AT91_ECC_SOFT=y -# CONFIG_MTD_NAND_AT91_ECC_HW is not set -# CONFIG_MTD_NAND_AT91_ECC_NONE is not set +CONFIG_MTD_NAND_ATMEL=y +CONFIG_MTD_NAND_ATMEL_ECC_SOFT=y +# CONFIG_MTD_NAND_ATMEL_ECC_HW is not set +# CONFIG_MTD_NAND_ATMEL_ECC_NONE is not set # CONFIG_MTD_NAND_NANDSIM is not set # CONFIG_MTD_NAND_PLATFORM is not set # CONFIG_MTD_ALAUDA is not set diff --git a/arch/arm/configs/usb-a9263_defconfig b/arch/arm/configs/usb-a9263_defconfig index 48d455bc7363..b786e0407e8e 100644 --- a/arch/arm/configs/usb-a9263_defconfig +++ b/arch/arm/configs/usb-a9263_defconfig @@ -450,10 +450,10 @@ CONFIG_MTD_NAND=y # CONFIG_MTD_NAND_MUSEUM_IDS is not set CONFIG_MTD_NAND_IDS=y # CONFIG_MTD_NAND_DISKONCHIP is not set -CONFIG_MTD_NAND_AT91=y -CONFIG_MTD_NAND_AT91_ECC_SOFT=y -# CONFIG_MTD_NAND_AT91_ECC_HW is not set -# CONFIG_MTD_NAND_AT91_ECC_NONE is not set +CONFIG_MTD_NAND_ATMEL=y +CONFIG_MTD_NAND_ATMEL_ECC_SOFT=y +# CONFIG_MTD_NAND_ATMEL_ECC_HW is not set +# CONFIG_MTD_NAND_ATMEL_ECC_NONE is not set # CONFIG_MTD_NAND_NANDSIM is not set # CONFIG_MTD_NAND_PLATFORM is not set # CONFIG_MTD_ALAUDA is not set diff --git a/arch/arm/configs/yl9200_defconfig b/arch/arm/configs/yl9200_defconfig index 26de37f74686..a9f41c24c9dc 100644 --- a/arch/arm/configs/yl9200_defconfig +++ b/arch/arm/configs/yl9200_defconfig @@ -421,7 +421,7 @@ CONFIG_MTD_NAND=y # CONFIG_MTD_NAND_ECC_SMC is not set # CONFIG_MTD_NAND_MUSEUM_IDS is not set CONFIG_MTD_NAND_IDS=y -CONFIG_MTD_NAND_AT91=y +CONFIG_MTD_NAND_ATMEL=y # CONFIG_MTD_NAND_NANDSIM is not set CONFIG_MTD_NAND_PLATFORM=y # CONFIG_MTD_ALAUDA is not set diff --git a/include/asm-arm/Kbuild b/arch/arm/include/asm/Kbuild similarity index 100% rename from include/asm-arm/Kbuild rename to arch/arm/include/asm/Kbuild diff --git a/include/asm-arm/a.out-core.h b/arch/arm/include/asm/a.out-core.h similarity index 100% rename from include/asm-arm/a.out-core.h rename to arch/arm/include/asm/a.out-core.h diff --git a/include/asm-arm/a.out.h b/arch/arm/include/asm/a.out.h similarity index 100% rename from include/asm-arm/a.out.h rename to arch/arm/include/asm/a.out.h diff --git a/include/asm-arm/assembler.h b/arch/arm/include/asm/assembler.h similarity index 98% rename from include/asm-arm/assembler.h rename to arch/arm/include/asm/assembler.h index 911393b2c6f0..6116e4893c0a 100644 --- a/include/asm-arm/assembler.h +++ b/arch/arm/include/asm/assembler.h @@ -1,5 +1,5 @@ /* - * linux/include/asm-arm/assembler.h + * arch/arm/include/asm/assembler.h * * Copyright (C) 1996-2000 Russell King * diff --git a/include/asm-arm/atomic.h b/arch/arm/include/asm/atomic.h similarity index 99% rename from include/asm-arm/atomic.h rename to arch/arm/include/asm/atomic.h index 3b59f94b5a3d..325f881ccb50 100644 --- a/include/asm-arm/atomic.h +++ b/arch/arm/include/asm/atomic.h @@ -1,5 +1,5 @@ /* - * linux/include/asm-arm/atomic.h + * arch/arm/include/asm/atomic.h * * Copyright (C) 1996 Russell King. * Copyright (C) 2002 Deep Blue Solutions Ltd. diff --git a/include/asm-arm/auxvec.h b/arch/arm/include/asm/auxvec.h similarity index 100% rename from include/asm-arm/auxvec.h rename to arch/arm/include/asm/auxvec.h diff --git a/include/asm-arm/bitops.h b/arch/arm/include/asm/bitops.h similarity index 100% rename from include/asm-arm/bitops.h rename to arch/arm/include/asm/bitops.h diff --git a/include/asm-arm/bug.h b/arch/arm/include/asm/bug.h similarity index 100% rename from include/asm-arm/bug.h rename to arch/arm/include/asm/bug.h diff --git a/include/asm-arm/bugs.h b/arch/arm/include/asm/bugs.h similarity index 93% rename from include/asm-arm/bugs.h rename to arch/arm/include/asm/bugs.h index ca54eb0f12d7..a97f1ea708d1 100644 --- a/include/asm-arm/bugs.h +++ b/arch/arm/include/asm/bugs.h @@ -1,5 +1,5 @@ /* - * linux/include/asm-arm/bugs.h + * arch/arm/include/asm/bugs.h * * Copyright (C) 1995-2003 Russell King * diff --git a/include/asm-arm/byteorder.h b/arch/arm/include/asm/byteorder.h similarity index 97% rename from include/asm-arm/byteorder.h rename to arch/arm/include/asm/byteorder.h index e6f7fcdc73b0..4fbfb22f65a0 100644 --- a/include/asm-arm/byteorder.h +++ b/arch/arm/include/asm/byteorder.h @@ -1,5 +1,5 @@ /* - * linux/include/asm-arm/byteorder.h + * arch/arm/include/asm/byteorder.h * * ARM Endian-ness. In little endian mode, the data bus is connected such * that byte accesses appear as: diff --git a/include/asm-arm/cache.h b/arch/arm/include/asm/cache.h similarity index 80% rename from include/asm-arm/cache.h rename to arch/arm/include/asm/cache.h index 31332c8ac04e..cb7a9e97fd7e 100644 --- a/include/asm-arm/cache.h +++ b/arch/arm/include/asm/cache.h @@ -1,5 +1,5 @@ /* - * linux/include/asm-arm/cache.h + * arch/arm/include/asm/cache.h */ #ifndef __ASMARM_CACHE_H #define __ASMARM_CACHE_H diff --git a/include/asm-arm/cacheflush.h b/arch/arm/include/asm/cacheflush.h similarity index 99% rename from include/asm-arm/cacheflush.h rename to arch/arm/include/asm/cacheflush.h index e68a1cbcc852..9073d9c6567e 100644 --- a/include/asm-arm/cacheflush.h +++ b/arch/arm/include/asm/cacheflush.h @@ -1,5 +1,5 @@ /* - * linux/include/asm-arm/cacheflush.h + * arch/arm/include/asm/cacheflush.h * * Copyright (C) 1999-2002 Russell King * diff --git a/include/asm-arm/checksum.h b/arch/arm/include/asm/checksum.h similarity index 98% rename from include/asm-arm/checksum.h rename to arch/arm/include/asm/checksum.h index eaa0efd8d0d4..6dcc16430868 100644 --- a/include/asm-arm/checksum.h +++ b/arch/arm/include/asm/checksum.h @@ -1,5 +1,5 @@ /* - * linux/include/asm-arm/checksum.h + * arch/arm/include/asm/checksum.h * * IP checksum routines * diff --git a/include/asm-arm/cnt32_to_63.h b/arch/arm/include/asm/cnt32_to_63.h similarity index 100% rename from include/asm-arm/cnt32_to_63.h rename to arch/arm/include/asm/cnt32_to_63.h diff --git a/include/asm-arm/cpu-multi32.h b/arch/arm/include/asm/cpu-multi32.h similarity index 97% rename from include/asm-arm/cpu-multi32.h rename to arch/arm/include/asm/cpu-multi32.h index 3479de9266e5..e2b5b0b2116a 100644 --- a/include/asm-arm/cpu-multi32.h +++ b/arch/arm/include/asm/cpu-multi32.h @@ -1,5 +1,5 @@ /* - * linux/include/asm-arm/cpu-multi32.h + * arch/arm/include/asm/cpu-multi32.h * * Copyright (C) 2000 Russell King * diff --git a/include/asm-arm/cpu-single.h b/arch/arm/include/asm/cpu-single.h similarity index 97% rename from include/asm-arm/cpu-single.h rename to arch/arm/include/asm/cpu-single.h index 0b120ee36091..f073a6d2a406 100644 --- a/include/asm-arm/cpu-single.h +++ b/arch/arm/include/asm/cpu-single.h @@ -1,5 +1,5 @@ /* - * linux/include/asm-arm/cpu-single.h + * arch/arm/include/asm/cpu-single.h * * Copyright (C) 2000 Russell King * diff --git a/include/asm-arm/cpu.h b/arch/arm/include/asm/cpu.h similarity index 93% rename from include/asm-arm/cpu.h rename to arch/arm/include/asm/cpu.h index 715426b9b08e..634b2d7c612a 100644 --- a/include/asm-arm/cpu.h +++ b/arch/arm/include/asm/cpu.h @@ -1,5 +1,5 @@ /* - * linux/include/asm-arm/cpu.h + * arch/arm/include/asm/cpu.h * * Copyright (C) 2004-2005 ARM Ltd. * diff --git a/include/asm-arm/cputime.h b/arch/arm/include/asm/cputime.h similarity index 100% rename from include/asm-arm/cputime.h rename to arch/arm/include/asm/cputime.h diff --git a/include/asm-arm/current.h b/arch/arm/include/asm/current.h similarity index 100% rename from include/asm-arm/current.h rename to arch/arm/include/asm/current.h diff --git a/include/asm-arm/delay.h b/arch/arm/include/asm/delay.h similarity index 100% rename from include/asm-arm/delay.h rename to arch/arm/include/asm/delay.h diff --git a/include/asm-arm/device.h b/arch/arm/include/asm/device.h similarity index 100% rename from include/asm-arm/device.h rename to arch/arm/include/asm/device.h diff --git a/include/asm-arm/div64.h b/arch/arm/include/asm/div64.h similarity index 100% rename from include/asm-arm/div64.h rename to arch/arm/include/asm/div64.h diff --git a/include/asm-arm/dma-mapping.h b/arch/arm/include/asm/dma-mapping.h similarity index 100% rename from include/asm-arm/dma-mapping.h rename to arch/arm/include/asm/dma-mapping.h diff --git a/include/asm-arm/dma.h b/arch/arm/include/asm/dma.h similarity index 99% rename from include/asm-arm/dma.h rename to arch/arm/include/asm/dma.h index 9f2c5305c260..75154b193117 100644 --- a/include/asm-arm/dma.h +++ b/arch/arm/include/asm/dma.h @@ -6,7 +6,7 @@ typedef unsigned int dmach_t; #include #include #include -#include +#include /* * This is the maximum virtual address which can be DMA'd from. diff --git a/include/asm-arm/domain.h b/arch/arm/include/asm/domain.h similarity index 98% rename from include/asm-arm/domain.h rename to arch/arm/include/asm/domain.h index 3c12a7625304..cc7ef4080711 100644 --- a/include/asm-arm/domain.h +++ b/arch/arm/include/asm/domain.h @@ -1,5 +1,5 @@ /* - * linux/include/asm-arm/domain.h + * arch/arm/include/asm/domain.h * * Copyright (C) 1999 Russell King. * diff --git a/include/asm-arm/ecard.h b/arch/arm/include/asm/ecard.h similarity index 99% rename from include/asm-arm/ecard.h rename to arch/arm/include/asm/ecard.h index 5e22881a630d..29f2610efc70 100644 --- a/include/asm-arm/ecard.h +++ b/arch/arm/include/asm/ecard.h @@ -1,5 +1,5 @@ /* - * linux/include/asm-arm/ecard.h + * arch/arm/include/asm/ecard.h * * definitions for expansion cards * diff --git a/include/asm-arm/elf.h b/arch/arm/include/asm/elf.h similarity index 100% rename from include/asm-arm/elf.h rename to arch/arm/include/asm/elf.h diff --git a/include/asm-arm/emergency-restart.h b/arch/arm/include/asm/emergency-restart.h similarity index 100% rename from include/asm-arm/emergency-restart.h rename to arch/arm/include/asm/emergency-restart.h diff --git a/include/asm-arm/errno.h b/arch/arm/include/asm/errno.h similarity index 100% rename from include/asm-arm/errno.h rename to arch/arm/include/asm/errno.h diff --git a/include/asm-arm/fb.h b/arch/arm/include/asm/fb.h similarity index 100% rename from include/asm-arm/fb.h rename to arch/arm/include/asm/fb.h diff --git a/include/asm-arm/fcntl.h b/arch/arm/include/asm/fcntl.h similarity index 100% rename from include/asm-arm/fcntl.h rename to arch/arm/include/asm/fcntl.h diff --git a/include/asm-arm/fiq.h b/arch/arm/include/asm/fiq.h similarity index 96% rename from include/asm-arm/fiq.h rename to arch/arm/include/asm/fiq.h index a3bad09e825c..2242ce22ec6c 100644 --- a/include/asm-arm/fiq.h +++ b/arch/arm/include/asm/fiq.h @@ -1,5 +1,5 @@ /* - * linux/include/asm-arm/fiq.h + * arch/arm/include/asm/fiq.h * * Support for FIQ on ARM architectures. * Written by Philip Blundell , 1998 diff --git a/include/asm-arm/flat.h b/arch/arm/include/asm/flat.h similarity index 90% rename from include/asm-arm/flat.h rename to arch/arm/include/asm/flat.h index 9918aa46d9e5..1d77e51907f6 100644 --- a/include/asm-arm/flat.h +++ b/arch/arm/include/asm/flat.h @@ -1,5 +1,5 @@ /* - * include/asm-arm/flat.h -- uClinux flat-format executables + * arch/arm/include/asm/flat.h -- uClinux flat-format executables */ #ifndef __ARM_FLAT_H__ diff --git a/include/asm-arm/floppy.h b/arch/arm/include/asm/floppy.h similarity index 98% rename from include/asm-arm/floppy.h rename to arch/arm/include/asm/floppy.h index 41a5e9d6bb69..c9f03eccc9d8 100644 --- a/include/asm-arm/floppy.h +++ b/arch/arm/include/asm/floppy.h @@ -1,5 +1,5 @@ /* - * linux/include/asm-arm/floppy.h + * arch/arm/include/asm/floppy.h * * Copyright (C) 1996-2000 Russell King * @@ -12,7 +12,7 @@ #ifndef __ASM_ARM_FLOPPY_H #define __ASM_ARM_FLOPPY_H #if 0 -#include +#include #endif #define fd_outb(val,port) \ diff --git a/include/asm-arm/fpstate.h b/arch/arm/include/asm/fpstate.h similarity index 97% rename from include/asm-arm/fpstate.h rename to arch/arm/include/asm/fpstate.h index 392eb5332323..ee5e03efc1bb 100644 --- a/include/asm-arm/fpstate.h +++ b/arch/arm/include/asm/fpstate.h @@ -1,5 +1,5 @@ /* - * linux/include/asm-arm/fpstate.h + * arch/arm/include/asm/fpstate.h * * Copyright (C) 1995 Russell King * diff --git a/include/asm-arm/ftrace.h b/arch/arm/include/asm/ftrace.h similarity index 100% rename from include/asm-arm/ftrace.h rename to arch/arm/include/asm/ftrace.h diff --git a/include/asm-arm/futex.h b/arch/arm/include/asm/futex.h similarity index 100% rename from include/asm-arm/futex.h rename to arch/arm/include/asm/futex.h diff --git a/include/asm-arm/glue.h b/arch/arm/include/asm/glue.h similarity index 99% rename from include/asm-arm/glue.h rename to arch/arm/include/asm/glue.h index a97a182ba287..a0e39d5d00c9 100644 --- a/include/asm-arm/glue.h +++ b/arch/arm/include/asm/glue.h @@ -1,5 +1,5 @@ /* - * linux/include/asm-arm/glue.h + * arch/arm/include/asm/glue.h * * Copyright (C) 1997-1999 Russell King * Copyright (C) 2000-2002 Deep Blue Solutions Ltd. diff --git a/include/asm-arm/gpio.h b/arch/arm/include/asm/gpio.h similarity index 84% rename from include/asm-arm/gpio.h rename to arch/arm/include/asm/gpio.h index fff4f800ee42..166a7a3e2840 100644 --- a/include/asm-arm/gpio.h +++ b/arch/arm/include/asm/gpio.h @@ -2,6 +2,6 @@ #define _ARCH_ARM_GPIO_H /* not all ARM platforms necessarily support this API ... */ -#include +#include #endif /* _ARCH_ARM_GPIO_H */ diff --git a/include/asm-arm/hardirq.h b/arch/arm/include/asm/hardirq.h similarity index 100% rename from include/asm-arm/hardirq.h rename to arch/arm/include/asm/hardirq.h diff --git a/include/asm-arm/hardware/arm_timer.h b/arch/arm/include/asm/hardware/arm_timer.h similarity index 100% rename from include/asm-arm/hardware/arm_timer.h rename to arch/arm/include/asm/hardware/arm_timer.h diff --git a/include/asm-arm/hardware/arm_twd.h b/arch/arm/include/asm/hardware/arm_twd.h similarity index 100% rename from include/asm-arm/hardware/arm_twd.h rename to arch/arm/include/asm/hardware/arm_twd.h diff --git a/include/asm-arm/hardware/cache-l2x0.h b/arch/arm/include/asm/hardware/cache-l2x0.h similarity index 97% rename from include/asm-arm/hardware/cache-l2x0.h rename to arch/arm/include/asm/hardware/cache-l2x0.h index 54029a740396..64f2252a25cd 100644 --- a/include/asm-arm/hardware/cache-l2x0.h +++ b/arch/arm/include/asm/hardware/cache-l2x0.h @@ -1,5 +1,5 @@ /* - * include/asm-arm/hardware/cache-l2x0.h + * arch/arm/include/asm/hardware/cache-l2x0.h * * Copyright (C) 2007 ARM Limited * diff --git a/include/asm-arm/hardware/clps7111.h b/arch/arm/include/asm/hardware/clps7111.h similarity index 99% rename from include/asm-arm/hardware/clps7111.h rename to arch/arm/include/asm/hardware/clps7111.h index 8d3228dc1778..44477225aed6 100644 --- a/include/asm-arm/hardware/clps7111.h +++ b/arch/arm/include/asm/hardware/clps7111.h @@ -1,5 +1,5 @@ /* - * linux/include/asm-arm/hardware/clps7111.h + * arch/arm/include/asm/hardware/clps7111.h * * This file contains the hardware definitions of the CLPS7111 internal * registers. diff --git a/include/asm-arm/hardware/cs89712.h b/arch/arm/include/asm/hardware/cs89712.h similarity index 97% rename from include/asm-arm/hardware/cs89712.h rename to arch/arm/include/asm/hardware/cs89712.h index ad99a3e1b802..f75626933e94 100644 --- a/include/asm-arm/hardware/cs89712.h +++ b/arch/arm/include/asm/hardware/cs89712.h @@ -1,5 +1,5 @@ /* - * linux/include/asm-arm/hardware/cs89712.h + * arch/arm/include/asm/hardware/cs89712.h * * This file contains the hardware definitions of the CS89712 * additional internal registers. diff --git a/include/asm-arm/hardware/debug-8250.S b/arch/arm/include/asm/hardware/debug-8250.S similarity index 93% rename from include/asm-arm/hardware/debug-8250.S rename to arch/arm/include/asm/hardware/debug-8250.S index 07c97fb233fc..22c689255e6e 100644 --- a/include/asm-arm/hardware/debug-8250.S +++ b/arch/arm/include/asm/hardware/debug-8250.S @@ -1,5 +1,5 @@ /* - * linux/include/asm-arm/hardware/debug-8250.S + * arch/arm/include/asm/hardware/debug-8250.S * * Copyright (C) 1994-1999 Russell King * diff --git a/include/asm-arm/hardware/debug-pl01x.S b/arch/arm/include/asm/hardware/debug-pl01x.S similarity index 93% rename from include/asm-arm/hardware/debug-pl01x.S rename to arch/arm/include/asm/hardware/debug-pl01x.S index 23c541a9e89a..f9fd083eff63 100644 --- a/include/asm-arm/hardware/debug-pl01x.S +++ b/arch/arm/include/asm/hardware/debug-pl01x.S @@ -1,4 +1,4 @@ -/* linux/include/asm-arm/hardware/debug-pl01x.S +/* arch/arm/include/asm/hardware/debug-pl01x.S * * Debugging macro include header * diff --git a/include/asm-arm/hardware/dec21285.h b/arch/arm/include/asm/hardware/dec21285.h similarity index 98% rename from include/asm-arm/hardware/dec21285.h rename to arch/arm/include/asm/hardware/dec21285.h index 546f7077be9c..0d7552751aaf 100644 --- a/include/asm-arm/hardware/dec21285.h +++ b/arch/arm/include/asm/hardware/dec21285.h @@ -1,5 +1,5 @@ /* - * linux/include/asm-arm/hardware/dec21285.h + * arch/arm/include/asm/hardware/dec21285.h * * Copyright (C) 1998 Russell King * @@ -19,7 +19,7 @@ #define DC21285_PCI_MEM 0x80000000 #ifndef __ASSEMBLY__ -#include +#include #define DC21285_IO(x) ((volatile unsigned long *)(ARMCSR_BASE+(x))) #else #define DC21285_IO(x) (x) diff --git a/include/asm-arm/hardware/entry-macro-iomd.S b/arch/arm/include/asm/hardware/entry-macro-iomd.S similarity index 99% rename from include/asm-arm/hardware/entry-macro-iomd.S rename to arch/arm/include/asm/hardware/entry-macro-iomd.S index 9bb580a5b15e..e0af4983723f 100644 --- a/include/asm-arm/hardware/entry-macro-iomd.S +++ b/arch/arm/include/asm/hardware/entry-macro-iomd.S @@ -1,5 +1,5 @@ /* - * include/asm-arm/hardware/entry-macro-iomd.S + * arch/arm/include/asm/hardware/entry-macro-iomd.S * * Low-level IRQ helper macros for IOC/IOMD based platforms * diff --git a/include/asm-arm/hardware/ep7211.h b/arch/arm/include/asm/hardware/ep7211.h similarity index 96% rename from include/asm-arm/hardware/ep7211.h rename to arch/arm/include/asm/hardware/ep7211.h index 017aa68f612d..654d5f625c49 100644 --- a/include/asm-arm/hardware/ep7211.h +++ b/arch/arm/include/asm/hardware/ep7211.h @@ -1,5 +1,5 @@ /* - * linux/include/asm-arm/hardware/ep7211.h + * arch/arm/include/asm/hardware/ep7211.h * * This file contains the hardware definitions of the EP7211 internal * registers. diff --git a/include/asm-arm/hardware/ep7212.h b/arch/arm/include/asm/hardware/ep7212.h similarity index 98% rename from include/asm-arm/hardware/ep7212.h rename to arch/arm/include/asm/hardware/ep7212.h index 0e952e747073..3b43bbeaf1db 100644 --- a/include/asm-arm/hardware/ep7212.h +++ b/arch/arm/include/asm/hardware/ep7212.h @@ -1,5 +1,5 @@ /* - * linux/include/asm-arm/hardware/ep7212.h + * arch/arm/include/asm/hardware/ep7212.h * * This file contains the hardware definitions of the EP7212 internal * registers. diff --git a/include/asm-arm/hardware/gic.h b/arch/arm/include/asm/hardware/gic.h similarity index 96% rename from include/asm-arm/hardware/gic.h rename to arch/arm/include/asm/hardware/gic.h index 966e428ad32c..4924914af188 100644 --- a/include/asm-arm/hardware/gic.h +++ b/arch/arm/include/asm/hardware/gic.h @@ -1,5 +1,5 @@ /* - * linux/include/asm-arm/hardware/gic.h + * arch/arm/include/asm/hardware/gic.h * * Copyright (C) 2002 ARM Limited, All Rights Reserved. * diff --git a/include/asm-arm/hardware/icst307.h b/arch/arm/include/asm/hardware/icst307.h similarity index 96% rename from include/asm-arm/hardware/icst307.h rename to arch/arm/include/asm/hardware/icst307.h index ff8618a441c0..554f128a1046 100644 --- a/include/asm-arm/hardware/icst307.h +++ b/arch/arm/include/asm/hardware/icst307.h @@ -1,5 +1,5 @@ /* - * linux/include/asm-arm/hardware/icst307.h + * arch/arm/include/asm/hardware/icst307.h * * Copyright (C) 2003 Deep Blue Solutions, Ltd, All Rights Reserved. * diff --git a/include/asm-arm/hardware/icst525.h b/arch/arm/include/asm/hardware/icst525.h similarity index 96% rename from include/asm-arm/hardware/icst525.h rename to arch/arm/include/asm/hardware/icst525.h index edd5a5704406..58f0dc43e2ed 100644 --- a/include/asm-arm/hardware/icst525.h +++ b/arch/arm/include/asm/hardware/icst525.h @@ -1,5 +1,5 @@ /* - * linux/include/asm-arm/hardware/icst525.h + * arch/arm/include/asm/hardware/icst525.h * * Copyright (C) 2003 Deep Blue Solutions, Ltd, All Rights Reserved. * diff --git a/include/asm-arm/hardware/ioc.h b/arch/arm/include/asm/hardware/ioc.h similarity index 97% rename from include/asm-arm/hardware/ioc.h rename to arch/arm/include/asm/hardware/ioc.h index b3b46ef65943..1f6b8013becb 100644 --- a/include/asm-arm/hardware/ioc.h +++ b/arch/arm/include/asm/hardware/ioc.h @@ -1,5 +1,5 @@ /* - * linux/include/asm-arm/hardware/ioc.h + * arch/arm/include/asm/hardware/ioc.h * * Copyright (C) Russell King * diff --git a/include/asm-arm/hardware/iomd.h b/arch/arm/include/asm/hardware/iomd.h similarity index 99% rename from include/asm-arm/hardware/iomd.h rename to arch/arm/include/asm/hardware/iomd.h index 396e55ad06c6..9c5afbd71a69 100644 --- a/include/asm-arm/hardware/iomd.h +++ b/arch/arm/include/asm/hardware/iomd.h @@ -1,5 +1,5 @@ /* - * linux/include/asm-arm/hardware/iomd.h + * arch/arm/include/asm/hardware/iomd.h * * Copyright (C) 1999 Russell King * diff --git a/include/asm-arm/hardware/iop3xx-adma.h b/arch/arm/include/asm/hardware/iop3xx-adma.h similarity index 99% rename from include/asm-arm/hardware/iop3xx-adma.h rename to arch/arm/include/asm/hardware/iop3xx-adma.h index af64676650a2..87bff09633aa 100644 --- a/include/asm-arm/hardware/iop3xx-adma.h +++ b/arch/arm/include/asm/hardware/iop3xx-adma.h @@ -19,7 +19,7 @@ #define _ADMA_H #include #include -#include +#include #include /* Memory copy units */ diff --git a/include/asm-arm/hardware/iop3xx-gpio.h b/arch/arm/include/asm/hardware/iop3xx-gpio.h similarity index 95% rename from include/asm-arm/hardware/iop3xx-gpio.h rename to arch/arm/include/asm/hardware/iop3xx-gpio.h index 0c9331f9ac24..b69d972b1f7d 100644 --- a/include/asm-arm/hardware/iop3xx-gpio.h +++ b/arch/arm/include/asm/hardware/iop3xx-gpio.h @@ -1,5 +1,5 @@ /* - * linux/include/asm-arm/hardware/iop3xx-gpio.h + * arch/arm/include/asm/hardware/iop3xx-gpio.h * * IOP3xx GPIO wrappers * @@ -25,7 +25,7 @@ #ifndef __ASM_ARM_HARDWARE_IOP3XX_GPIO_H #define __ASM_ARM_HARDWARE_IOP3XX_GPIO_H -#include +#include #include #define IOP3XX_N_GPIOS 8 diff --git a/include/asm-arm/hardware/iop3xx.h b/arch/arm/include/asm/hardware/iop3xx.h similarity index 99% rename from include/asm-arm/hardware/iop3xx.h rename to arch/arm/include/asm/hardware/iop3xx.h index 18f6937f5010..4b8e7f559929 100644 --- a/include/asm-arm/hardware/iop3xx.h +++ b/arch/arm/include/asm/hardware/iop3xx.h @@ -1,5 +1,5 @@ /* - * include/asm-arm/hardware/iop3xx.h + * arch/arm/include/asm/hardware/iop3xx.h * * Intel IOP32X and IOP33X register definitions * diff --git a/include/asm-arm/hardware/iop_adma.h b/arch/arm/include/asm/hardware/iop_adma.h similarity index 100% rename from include/asm-arm/hardware/iop_adma.h rename to arch/arm/include/asm/hardware/iop_adma.h diff --git a/include/asm-arm/hardware/it8152.h b/arch/arm/include/asm/hardware/it8152.h similarity index 100% rename from include/asm-arm/hardware/it8152.h rename to arch/arm/include/asm/hardware/it8152.h diff --git a/include/asm-arm/hardware/linkup-l1110.h b/arch/arm/include/asm/hardware/linkup-l1110.h similarity index 100% rename from include/asm-arm/hardware/linkup-l1110.h rename to arch/arm/include/asm/hardware/linkup-l1110.h diff --git a/include/asm-arm/hardware/locomo.h b/arch/arm/include/asm/hardware/locomo.h similarity index 99% rename from include/asm-arm/hardware/locomo.h rename to arch/arm/include/asm/hardware/locomo.h index fb0645de6f31..954b1be991b4 100644 --- a/include/asm-arm/hardware/locomo.h +++ b/arch/arm/include/asm/hardware/locomo.h @@ -1,5 +1,5 @@ /* - * linux/include/asm-arm/hardware/locomo.h + * arch/arm/include/asm/hardware/locomo.h * * This file contains the definitions for the LoCoMo G/A Chip * diff --git a/include/asm-arm/hardware/memc.h b/arch/arm/include/asm/hardware/memc.h similarity index 93% rename from include/asm-arm/hardware/memc.h rename to arch/arm/include/asm/hardware/memc.h index 8aef5aa0e01b..42ba7c167d1f 100644 --- a/include/asm-arm/hardware/memc.h +++ b/arch/arm/include/asm/hardware/memc.h @@ -1,5 +1,5 @@ /* - * linux/include/asm-arm/hardware/memc.h + * arch/arm/include/asm/hardware/memc.h * * Copyright (C) Russell King. * diff --git a/include/asm-arm/hardware/pci_v3.h b/arch/arm/include/asm/hardware/pci_v3.h similarity index 99% rename from include/asm-arm/hardware/pci_v3.h rename to arch/arm/include/asm/hardware/pci_v3.h index 4d497bdb9a97..2811c7e2cfdf 100644 --- a/include/asm-arm/hardware/pci_v3.h +++ b/arch/arm/include/asm/hardware/pci_v3.h @@ -1,5 +1,5 @@ /* - * linux/include/asm-arm/hardware/pci_v3.h + * arch/arm/include/asm/hardware/pci_v3.h * * Internal header file PCI V3 chip * diff --git a/include/asm-arm/hardware/sa1111.h b/arch/arm/include/asm/hardware/sa1111.h similarity index 99% rename from include/asm-arm/hardware/sa1111.h rename to arch/arm/include/asm/hardware/sa1111.h index 61b1d05c7df7..5da2595759e5 100644 --- a/include/asm-arm/hardware/sa1111.h +++ b/arch/arm/include/asm/hardware/sa1111.h @@ -1,5 +1,5 @@ /* - * linux/include/asm-arm/hardware/sa1111.h + * arch/arm/include/asm/hardware/sa1111.h * * Copyright (C) 2000 John G Dorsey * @@ -12,7 +12,7 @@ #ifndef _ASM_ARCH_SA1111 #define _ASM_ARCH_SA1111 -#include +#include /* * The SA1111 is always located at virtual 0xf4000000, and is always diff --git a/include/asm-arm/hardware/scoop.h b/arch/arm/include/asm/hardware/scoop.h similarity index 100% rename from include/asm-arm/hardware/scoop.h rename to arch/arm/include/asm/hardware/scoop.h diff --git a/include/asm-arm/hardware/sharpsl_pm.h b/arch/arm/include/asm/hardware/sharpsl_pm.h similarity index 100% rename from include/asm-arm/hardware/sharpsl_pm.h rename to arch/arm/include/asm/hardware/sharpsl_pm.h diff --git a/include/asm-arm/hardware/ssp.h b/arch/arm/include/asm/hardware/ssp.h similarity index 100% rename from include/asm-arm/hardware/ssp.h rename to arch/arm/include/asm/hardware/ssp.h diff --git a/include/asm-arm/hardware/uengine.h b/arch/arm/include/asm/hardware/uengine.h similarity index 100% rename from include/asm-arm/hardware/uengine.h rename to arch/arm/include/asm/hardware/uengine.h diff --git a/include/asm-arm/hardware/vic.h b/arch/arm/include/asm/hardware/vic.h similarity index 97% rename from include/asm-arm/hardware/vic.h rename to arch/arm/include/asm/hardware/vic.h index ed9ca3736a0b..263f2c362a30 100644 --- a/include/asm-arm/hardware/vic.h +++ b/arch/arm/include/asm/hardware/vic.h @@ -1,5 +1,5 @@ /* - * linux/include/asm-arm/hardware/vic.h + * arch/arm/include/asm/hardware/vic.h * * Copyright (c) ARM Limited 2003. All rights reserved. * diff --git a/arch/arm/include/asm/hw_irq.h b/arch/arm/include/asm/hw_irq.h new file mode 100644 index 000000000000..90831f6f5f5c --- /dev/null +++ b/arch/arm/include/asm/hw_irq.h @@ -0,0 +1,27 @@ +/* + * Nothing to see here yet + */ +#ifndef _ARCH_ARM_HW_IRQ_H +#define _ARCH_ARM_HW_IRQ_H + +static inline void ack_bad_irq(int irq) +{ + extern unsigned long irq_err_count; + irq_err_count++; +} + +/* + * Obsolete inline function for calling irq descriptor handlers. + */ +static inline void desc_handle_irq(unsigned int irq, struct irq_desc *desc) +{ + desc->handle_irq(irq, desc); +} + +void set_irq_flags(unsigned int irq, unsigned int flags); + +#define IRQF_VALID (1 << 0) +#define IRQF_PROBE (1 << 1) +#define IRQF_NOAUTOEN (1 << 2) + +#endif diff --git a/include/asm-arm/hwcap.h b/arch/arm/include/asm/hwcap.h similarity index 100% rename from include/asm-arm/hwcap.h rename to arch/arm/include/asm/hwcap.h diff --git a/include/asm-arm/ide.h b/arch/arm/include/asm/ide.h similarity index 93% rename from include/asm-arm/ide.h rename to arch/arm/include/asm/ide.h index a48019f99d08..b507ce8e5019 100644 --- a/include/asm-arm/ide.h +++ b/arch/arm/include/asm/ide.h @@ -1,5 +1,5 @@ /* - * linux/include/asm-arm/ide.h + * arch/arm/include/asm/ide.h * * Copyright (C) 1994-1996 Linus Torvalds & authors */ diff --git a/include/asm-arm/io.h b/arch/arm/include/asm/io.h similarity index 99% rename from include/asm-arm/io.h rename to arch/arm/include/asm/io.h index eebe56e74d6d..94a95d7fafd6 100644 --- a/include/asm-arm/io.h +++ b/arch/arm/include/asm/io.h @@ -1,5 +1,5 @@ /* - * linux/include/asm-arm/io.h + * arch/arm/include/asm/io.h * * Copyright (C) 1996-2000 Russell King * @@ -82,7 +82,7 @@ extern void __readwrite_bug(const char *fn); /* * Now, pick up the machine-defined IO definitions */ -#include +#include /* * IO port access primitives diff --git a/include/asm-arm/ioctl.h b/arch/arm/include/asm/ioctl.h similarity index 100% rename from include/asm-arm/ioctl.h rename to arch/arm/include/asm/ioctl.h diff --git a/include/asm-arm/ioctls.h b/arch/arm/include/asm/ioctls.h similarity index 100% rename from include/asm-arm/ioctls.h rename to arch/arm/include/asm/ioctls.h diff --git a/include/asm-arm/ipcbuf.h b/arch/arm/include/asm/ipcbuf.h similarity index 100% rename from include/asm-arm/ipcbuf.h rename to arch/arm/include/asm/ipcbuf.h diff --git a/include/asm-arm/irq.h b/arch/arm/include/asm/irq.h similarity index 93% rename from include/asm-arm/irq.h rename to arch/arm/include/asm/irq.h index 9cb01907e43b..d6786090d02c 100644 --- a/include/asm-arm/irq.h +++ b/arch/arm/include/asm/irq.h @@ -1,7 +1,7 @@ #ifndef __ASM_ARM_IRQ_H #define __ASM_ARM_IRQ_H -#include +#include #ifndef irq_canonicalize #define irq_canonicalize(i) (i) diff --git a/include/asm-arm/irq_regs.h b/arch/arm/include/asm/irq_regs.h similarity index 100% rename from include/asm-arm/irq_regs.h rename to arch/arm/include/asm/irq_regs.h diff --git a/include/asm-arm/irqflags.h b/arch/arm/include/asm/irqflags.h similarity index 100% rename from include/asm-arm/irqflags.h rename to arch/arm/include/asm/irqflags.h diff --git a/include/asm-arm/kdebug.h b/arch/arm/include/asm/kdebug.h similarity index 100% rename from include/asm-arm/kdebug.h rename to arch/arm/include/asm/kdebug.h diff --git a/include/asm-arm/kexec.h b/arch/arm/include/asm/kexec.h similarity index 100% rename from include/asm-arm/kexec.h rename to arch/arm/include/asm/kexec.h diff --git a/include/asm-arm/kgdb.h b/arch/arm/include/asm/kgdb.h similarity index 100% rename from include/asm-arm/kgdb.h rename to arch/arm/include/asm/kgdb.h diff --git a/include/asm-arm/kmap_types.h b/arch/arm/include/asm/kmap_types.h similarity index 100% rename from include/asm-arm/kmap_types.h rename to arch/arm/include/asm/kmap_types.h diff --git a/include/asm-arm/kprobes.h b/arch/arm/include/asm/kprobes.h similarity index 98% rename from include/asm-arm/kprobes.h rename to arch/arm/include/asm/kprobes.h index b1a37876942d..a5d0d99ad387 100644 --- a/include/asm-arm/kprobes.h +++ b/arch/arm/include/asm/kprobes.h @@ -1,5 +1,5 @@ /* - * include/asm-arm/kprobes.h + * arch/arm/include/asm/kprobes.h * * Copyright (C) 2006, 2007 Motorola Inc. * diff --git a/include/asm-arm/leds.h b/arch/arm/include/asm/leds.h similarity index 96% rename from include/asm-arm/leds.h rename to arch/arm/include/asm/leds.h index 12290ea55801..c545739f39b7 100644 --- a/include/asm-arm/leds.h +++ b/arch/arm/include/asm/leds.h @@ -1,5 +1,5 @@ /* - * linux/include/asm-arm/leds.h + * arch/arm/include/asm/leds.h * * Copyright (C) 1998 Russell King * diff --git a/include/asm-arm/limits.h b/arch/arm/include/asm/limits.h similarity index 100% rename from include/asm-arm/limits.h rename to arch/arm/include/asm/limits.h diff --git a/include/asm-arm/linkage.h b/arch/arm/include/asm/linkage.h similarity index 100% rename from include/asm-arm/linkage.h rename to arch/arm/include/asm/linkage.h diff --git a/include/asm-arm/local.h b/arch/arm/include/asm/local.h similarity index 100% rename from include/asm-arm/local.h rename to arch/arm/include/asm/local.h diff --git a/include/asm-arm/locks.h b/arch/arm/include/asm/locks.h similarity index 99% rename from include/asm-arm/locks.h rename to arch/arm/include/asm/locks.h index 852220eecdbc..ef4c897772d1 100644 --- a/include/asm-arm/locks.h +++ b/arch/arm/include/asm/locks.h @@ -1,5 +1,5 @@ /* - * linux/include/asm-arm/locks.h + * arch/arm/include/asm/locks.h * * Copyright (C) 2000 Russell King * diff --git a/include/asm-arm/mach/arch.h b/arch/arm/include/asm/mach/arch.h similarity index 97% rename from include/asm-arm/mach/arch.h rename to arch/arm/include/asm/mach/arch.h index bcc8aed7c9a9..c59842dc7cb8 100644 --- a/include/asm-arm/mach/arch.h +++ b/arch/arm/include/asm/mach/arch.h @@ -1,5 +1,5 @@ /* - * linux/include/asm-arm/mach/arch.h + * arch/arm/include/asm/mach/arch.h * * Copyright (C) 2000 Russell King * diff --git a/include/asm-arm/mach/dma.h b/arch/arm/include/asm/mach/dma.h similarity index 97% rename from include/asm-arm/mach/dma.h rename to arch/arm/include/asm/mach/dma.h index e7c4a20aad53..fc7278ea7146 100644 --- a/include/asm-arm/mach/dma.h +++ b/arch/arm/include/asm/mach/dma.h @@ -1,5 +1,5 @@ /* - * linux/include/asm-arm/mach/dma.h + * arch/arm/include/asm/mach/dma.h * * Copyright (C) 1998-2000 Russell King * diff --git a/include/asm-arm/mach/flash.h b/arch/arm/include/asm/mach/flash.h similarity index 96% rename from include/asm-arm/mach/flash.h rename to arch/arm/include/asm/mach/flash.h index 05b029ef6371..4ca69fe2c850 100644 --- a/include/asm-arm/mach/flash.h +++ b/arch/arm/include/asm/mach/flash.h @@ -1,5 +1,5 @@ /* - * linux/include/asm-arm/mach/flash.h + * arch/arm/include/asm/mach/flash.h * * Copyright (C) 2003 Russell King, All Rights Reserved. * diff --git a/include/asm-arm/mach/irda.h b/arch/arm/include/asm/mach/irda.h similarity index 93% rename from include/asm-arm/mach/irda.h rename to arch/arm/include/asm/mach/irda.h index 58984d9c0b0b..38f77b5e56cf 100644 --- a/include/asm-arm/mach/irda.h +++ b/arch/arm/include/asm/mach/irda.h @@ -1,5 +1,5 @@ /* - * linux/include/asm-arm/mach/irda.h + * arch/arm/include/asm/mach/irda.h * * Copyright (C) 2004 Russell King. * diff --git a/include/asm-arm/mach/irq.h b/arch/arm/include/asm/mach/irq.h similarity index 61% rename from include/asm-arm/mach/irq.h rename to arch/arm/include/asm/mach/irq.h index eb0bfba6570d..acac5302e4ea 100644 --- a/include/asm-arm/mach/irq.h +++ b/arch/arm/include/asm/mach/irq.h @@ -1,5 +1,5 @@ /* - * linux/include/asm-arm/mach/irq.h + * arch/arm/include/asm/mach/irq.h * * Copyright (C) 1995-2000 Russell King. * @@ -21,20 +21,6 @@ extern void (*init_arch_irq)(void); extern void init_FIQ(void); extern int show_fiq_list(struct seq_file *, void *); -/* - * Obsolete inline function for calling irq descriptor handlers. - */ -static inline void desc_handle_irq(unsigned int irq, struct irq_desc *desc) -{ - desc->handle_irq(irq, desc); -} - -void set_irq_flags(unsigned int irq, unsigned int flags); - -#define IRQF_VALID (1 << 0) -#define IRQF_PROBE (1 << 1) -#define IRQF_NOAUTOEN (1 << 2) - /* * This is for easy migration, but should be changed in the source */ @@ -45,10 +31,4 @@ do { \ spin_unlock(&desc->lock); \ } while(0) -extern unsigned long irq_err_count; -static inline void ack_bad_irq(int irq) -{ - irq_err_count++; -} - #endif diff --git a/include/asm-arm/mach/map.h b/arch/arm/include/asm/mach/map.h similarity index 96% rename from include/asm-arm/mach/map.h rename to arch/arm/include/asm/mach/map.h index 7ef3c8390180..06f583b13999 100644 --- a/include/asm-arm/mach/map.h +++ b/arch/arm/include/asm/mach/map.h @@ -1,5 +1,5 @@ /* - * linux/include/asm-arm/map.h + * arch/arm/include/asm/map.h * * Copyright (C) 1999-2000 Russell King * diff --git a/include/asm-arm/mach/mmc.h b/arch/arm/include/asm/mach/mmc.h similarity index 88% rename from include/asm-arm/mach/mmc.h rename to arch/arm/include/asm/mach/mmc.h index eb91145c00c4..4da332b03144 100644 --- a/include/asm-arm/mach/mmc.h +++ b/arch/arm/include/asm/mach/mmc.h @@ -1,5 +1,5 @@ /* - * linux/include/asm-arm/mach/mmc.h + * arch/arm/include/asm/mach/mmc.h */ #ifndef ASMARM_MACH_MMC_H #define ASMARM_MACH_MMC_H diff --git a/include/asm-arm/mach/pci.h b/arch/arm/include/asm/mach/pci.h similarity index 98% rename from include/asm-arm/mach/pci.h rename to arch/arm/include/asm/mach/pci.h index 9d4f6b5ea419..32da1ae17e06 100644 --- a/include/asm-arm/mach/pci.h +++ b/arch/arm/include/asm/mach/pci.h @@ -1,5 +1,5 @@ /* - * linux/include/asm-arm/mach/pci.h + * arch/arm/include/asm/mach/pci.h * * Copyright (C) 2000 Russell King * diff --git a/include/asm-avr32/mach/serial_at91.h b/arch/arm/include/asm/mach/serial_at91.h similarity index 94% rename from include/asm-avr32/mach/serial_at91.h rename to arch/arm/include/asm/mach/serial_at91.h index 55b317a89061..ea6d063923b8 100644 --- a/include/asm-avr32/mach/serial_at91.h +++ b/arch/arm/include/asm/mach/serial_at91.h @@ -1,5 +1,5 @@ /* - * linux/include/asm-arm/mach/serial_at91.h + * arch/arm/include/asm/mach/serial_at91.h * * Based on serial_sa1100.h by Nicolas Pitre * diff --git a/include/asm-arm/mach/serial_sa1100.h b/arch/arm/include/asm/mach/serial_sa1100.h similarity index 86% rename from include/asm-arm/mach/serial_sa1100.h rename to arch/arm/include/asm/mach/serial_sa1100.h index 20c22bb218d9..d09064bf95a0 100644 --- a/include/asm-arm/mach/serial_sa1100.h +++ b/arch/arm/include/asm/mach/serial_sa1100.h @@ -1,9 +1,9 @@ /* - * linux/include/asm-arm/mach/serial_sa1100.h + * arch/arm/include/asm/mach/serial_sa1100.h * * Author: Nicolas Pitre * - * Moved to include/asm-arm/mach and changed lots, Russell King + * Moved and changed lots, Russell King * * Low level machine dependent UART functions. */ diff --git a/include/asm-arm/mach/sharpsl_param.h b/arch/arm/include/asm/mach/sharpsl_param.h similarity index 100% rename from include/asm-arm/mach/sharpsl_param.h rename to arch/arm/include/asm/mach/sharpsl_param.h diff --git a/include/asm-arm/mach/time.h b/arch/arm/include/asm/mach/time.h similarity index 97% rename from include/asm-arm/mach/time.h rename to arch/arm/include/asm/mach/time.h index 2fd36ea0130d..b2cc1fcd0400 100644 --- a/include/asm-arm/mach/time.h +++ b/arch/arm/include/asm/mach/time.h @@ -1,5 +1,5 @@ /* - * linux/include/asm-arm/mach/time.h + * arch/arm/include/asm/mach/time.h * * Copyright (C) 2004 MontaVista Software, Inc. * diff --git a/include/asm-arm/mach/udc_pxa2xx.h b/arch/arm/include/asm/mach/udc_pxa2xx.h similarity index 95% rename from include/asm-arm/mach/udc_pxa2xx.h rename to arch/arm/include/asm/mach/udc_pxa2xx.h index 9e5ed7c0f27f..270902c353fd 100644 --- a/include/asm-arm/mach/udc_pxa2xx.h +++ b/arch/arm/include/asm/mach/udc_pxa2xx.h @@ -1,5 +1,5 @@ /* - * linux/include/asm-arm/mach/udc_pxa2xx.h + * arch/arm/include/asm/mach/udc_pxa2xx.h * * This supports machine-specific differences in how the PXA2xx * USB Device Controller (UDC) is wired. diff --git a/include/asm-arm/mc146818rtc.h b/arch/arm/include/asm/mc146818rtc.h similarity index 95% rename from include/asm-arm/mc146818rtc.h rename to arch/arm/include/asm/mc146818rtc.h index 7b81e0c42543..e1ca48a9e973 100644 --- a/include/asm-arm/mc146818rtc.h +++ b/arch/arm/include/asm/mc146818rtc.h @@ -4,7 +4,7 @@ #ifndef _ASM_MC146818RTC_H #define _ASM_MC146818RTC_H -#include +#include #include #ifndef RTC_PORT diff --git a/include/asm-arm/memory.h b/arch/arm/include/asm/memory.h similarity index 99% rename from include/asm-arm/memory.h rename to arch/arm/include/asm/memory.h index 9ba4d7136e6b..1e070a2b561a 100644 --- a/include/asm-arm/memory.h +++ b/arch/arm/include/asm/memory.h @@ -1,5 +1,5 @@ /* - * linux/include/asm-arm/memory.h + * arch/arm/include/asm/memory.h * * Copyright (C) 2000-2002 Russell King * modification for nommu, Hyok S. Choi, 2004 @@ -24,7 +24,7 @@ #endif #include -#include +#include #include #ifdef CONFIG_MMU diff --git a/include/asm-arm/mman.h b/arch/arm/include/asm/mman.h similarity index 100% rename from include/asm-arm/mman.h rename to arch/arm/include/asm/mman.h diff --git a/include/asm-arm/mmu.h b/arch/arm/include/asm/mmu.h similarity index 100% rename from include/asm-arm/mmu.h rename to arch/arm/include/asm/mmu.h diff --git a/include/asm-arm/mmu_context.h b/arch/arm/include/asm/mmu_context.h similarity index 98% rename from include/asm-arm/mmu_context.h rename to arch/arm/include/asm/mmu_context.h index 91b9dfdfed52..a301e446007f 100644 --- a/include/asm-arm/mmu_context.h +++ b/arch/arm/include/asm/mmu_context.h @@ -1,5 +1,5 @@ /* - * linux/include/asm-arm/mmu_context.h + * arch/arm/include/asm/mmu_context.h * * Copyright (C) 1996 Russell King. * diff --git a/include/asm-arm/mmzone.h b/arch/arm/include/asm/mmzone.h similarity index 90% rename from include/asm-arm/mmzone.h rename to arch/arm/include/asm/mmzone.h index b87de151f0a4..ae63a4fd28c8 100644 --- a/include/asm-arm/mmzone.h +++ b/arch/arm/include/asm/mmzone.h @@ -1,5 +1,5 @@ /* - * linux/include/asm-arm/mmzone.h + * arch/arm/include/asm/mmzone.h * * 1999-12-29 Nicolas Pitre Created * @@ -25,6 +25,6 @@ extern pg_data_t discontig_node_data[]; */ #define NODE_MEM_MAP(nid) (NODE_DATA(nid)->node_mem_map) -#include +#include #endif diff --git a/include/asm-arm/module.h b/arch/arm/include/asm/module.h similarity index 100% rename from include/asm-arm/module.h rename to arch/arm/include/asm/module.h diff --git a/include/asm-arm/msgbuf.h b/arch/arm/include/asm/msgbuf.h similarity index 100% rename from include/asm-arm/msgbuf.h rename to arch/arm/include/asm/msgbuf.h diff --git a/include/asm-arm/mtd-xip.h b/arch/arm/include/asm/mtd-xip.h similarity index 92% rename from include/asm-arm/mtd-xip.h rename to arch/arm/include/asm/mtd-xip.h index 9eb127cc7db2..4225372a26f3 100644 --- a/include/asm-arm/mtd-xip.h +++ b/arch/arm/include/asm/mtd-xip.h @@ -17,8 +17,8 @@ #ifndef __ARM_MTD_XIP_H__ #define __ARM_MTD_XIP_H__ -#include -#include +#include +#include /* fill instruction prefetch */ #define xip_iprefetch() do { asm volatile (".rep 8; nop; .endr"); } while (0) diff --git a/include/asm-arm/mutex.h b/arch/arm/include/asm/mutex.h similarity index 98% rename from include/asm-arm/mutex.h rename to arch/arm/include/asm/mutex.h index 020bd98710a1..93226cf23ae0 100644 --- a/include/asm-arm/mutex.h +++ b/arch/arm/include/asm/mutex.h @@ -1,5 +1,5 @@ /* - * include/asm-arm/mutex.h + * arch/arm/include/asm/mutex.h * * ARM optimized mutex locking primitives * diff --git a/include/asm-arm/nwflash.h b/arch/arm/include/asm/nwflash.h similarity index 100% rename from include/asm-arm/nwflash.h rename to arch/arm/include/asm/nwflash.h diff --git a/include/asm-arm/page-nommu.h b/arch/arm/include/asm/page-nommu.h similarity index 96% rename from include/asm-arm/page-nommu.h rename to arch/arm/include/asm/page-nommu.h index ea1cde84f500..3574c0deb37f 100644 --- a/include/asm-arm/page-nommu.h +++ b/arch/arm/include/asm/page-nommu.h @@ -1,5 +1,5 @@ /* - * linux/include/asm-arm/page-nommu.h + * arch/arm/include/asm/page-nommu.h * * Copyright (C) 2004 Hyok S. Choi * diff --git a/include/asm-arm/page.h b/arch/arm/include/asm/page.h similarity index 99% rename from include/asm-arm/page.h rename to arch/arm/include/asm/page.h index 7c5fc5582e5d..cf2e2680daaa 100644 --- a/include/asm-arm/page.h +++ b/arch/arm/include/asm/page.h @@ -1,5 +1,5 @@ /* - * linux/include/asm-arm/page.h + * arch/arm/include/asm/page.h * * Copyright (C) 1995-2003 Russell King * diff --git a/include/asm-arm/param.h b/arch/arm/include/asm/param.h similarity index 95% rename from include/asm-arm/param.h rename to arch/arm/include/asm/param.h index 15806468ba72..8b24bf94c06b 100644 --- a/include/asm-arm/param.h +++ b/arch/arm/include/asm/param.h @@ -1,5 +1,5 @@ /* - * linux/include/asm-arm/param.h + * arch/arm/include/asm/param.h * * Copyright (C) 1995-1999 Russell King * diff --git a/include/asm-arm/parport.h b/arch/arm/include/asm/parport.h similarity index 86% rename from include/asm-arm/parport.h rename to arch/arm/include/asm/parport.h index f2f90c76ddd1..26e94b09035a 100644 --- a/include/asm-arm/parport.h +++ b/arch/arm/include/asm/parport.h @@ -1,5 +1,5 @@ /* - * linux/include/asm-arm/parport.h: ARM-specific parport initialisation + * arch/arm/include/asm/parport.h: ARM-specific parport initialisation * * Copyright (C) 1999, 2000 Tim Waugh * diff --git a/include/asm-arm/pci.h b/arch/arm/include/asm/pci.h similarity index 97% rename from include/asm-arm/pci.h rename to arch/arm/include/asm/pci.h index 2d84792f2e12..721c03d53f4b 100644 --- a/include/asm-arm/pci.h +++ b/arch/arm/include/asm/pci.h @@ -4,7 +4,7 @@ #ifdef __KERNEL__ #include -#include /* for PCIBIOS_MIN_* */ +#include /* for PCIBIOS_MIN_* */ #define pcibios_scan_all_fns(a, b) 0 diff --git a/include/asm-arm/percpu.h b/arch/arm/include/asm/percpu.h similarity index 100% rename from include/asm-arm/percpu.h rename to arch/arm/include/asm/percpu.h diff --git a/include/asm-arm/pgalloc.h b/arch/arm/include/asm/pgalloc.h similarity index 98% rename from include/asm-arm/pgalloc.h rename to arch/arm/include/asm/pgalloc.h index 163b0305dd76..3dcd64bf1824 100644 --- a/include/asm-arm/pgalloc.h +++ b/arch/arm/include/asm/pgalloc.h @@ -1,5 +1,5 @@ /* - * linux/include/asm-arm/pgalloc.h + * arch/arm/include/asm/pgalloc.h * * Copyright (C) 2000-2001 Russell King * diff --git a/include/asm-arm/pgtable-hwdef.h b/arch/arm/include/asm/pgtable-hwdef.h similarity index 98% rename from include/asm-arm/pgtable-hwdef.h rename to arch/arm/include/asm/pgtable-hwdef.h index f3b5120c99fe..fd1521d5cb9d 100644 --- a/include/asm-arm/pgtable-hwdef.h +++ b/arch/arm/include/asm/pgtable-hwdef.h @@ -1,5 +1,5 @@ /* - * linux/include/asm-arm/pgtable-hwdef.h + * arch/arm/include/asm/pgtable-hwdef.h * * Copyright (C) 1995-2002 Russell King * diff --git a/include/asm-arm/pgtable-nommu.h b/arch/arm/include/asm/pgtable-nommu.h similarity index 98% rename from include/asm-arm/pgtable-nommu.h rename to arch/arm/include/asm/pgtable-nommu.h index 386fcc10a973..b011f2e939aa 100644 --- a/include/asm-arm/pgtable-nommu.h +++ b/arch/arm/include/asm/pgtable-nommu.h @@ -1,5 +1,5 @@ /* - * linux/include/asm-arm/pgtable-nommu.h + * arch/arm/include/asm/pgtable-nommu.h * * Copyright (C) 1995-2002 Russell King * Copyright (C) 2004 Hyok S. Choi diff --git a/include/asm-arm/pgtable.h b/arch/arm/include/asm/pgtable.h similarity index 99% rename from include/asm-arm/pgtable.h rename to arch/arm/include/asm/pgtable.h index 5571c13c3f3b..8e21ef15bd74 100644 --- a/include/asm-arm/pgtable.h +++ b/arch/arm/include/asm/pgtable.h @@ -1,5 +1,5 @@ /* - * linux/include/asm-arm/pgtable.h + * arch/arm/include/asm/pgtable.h * * Copyright (C) 1995-2002 Russell King * @@ -20,7 +20,7 @@ #else #include -#include +#include #include /* diff --git a/include/asm-arm/poll.h b/arch/arm/include/asm/poll.h similarity index 100% rename from include/asm-arm/poll.h rename to arch/arm/include/asm/poll.h diff --git a/include/asm-arm/posix_types.h b/arch/arm/include/asm/posix_types.h similarity index 98% rename from include/asm-arm/posix_types.h rename to arch/arm/include/asm/posix_types.h index c37379dadcb2..2446d23bfdbf 100644 --- a/include/asm-arm/posix_types.h +++ b/arch/arm/include/asm/posix_types.h @@ -1,5 +1,5 @@ /* - * linux/include/asm-arm/posix_types.h + * arch/arm/include/asm/posix_types.h * * Copyright (C) 1996-1998 Russell King. * diff --git a/include/asm-arm/proc-fns.h b/arch/arm/include/asm/proc-fns.h similarity index 99% rename from include/asm-arm/proc-fns.h rename to arch/arm/include/asm/proc-fns.h index 75ec760f4c74..db80203b68e0 100644 --- a/include/asm-arm/proc-fns.h +++ b/arch/arm/include/asm/proc-fns.h @@ -1,5 +1,5 @@ /* - * linux/include/asm-arm/proc-fns.h + * arch/arm/include/asm/proc-fns.h * * Copyright (C) 1997-1999 Russell King * Copyright (C) 2000 Deep Blue Solutions Ltd diff --git a/include/asm-arm/processor.h b/arch/arm/include/asm/processor.h similarity index 98% rename from include/asm-arm/processor.h rename to arch/arm/include/asm/processor.h index bd8029e8dc67..b01d5e7e3d5a 100644 --- a/include/asm-arm/processor.h +++ b/arch/arm/include/asm/processor.h @@ -1,5 +1,5 @@ /* - * linux/include/asm-arm/processor.h + * arch/arm/include/asm/processor.h * * Copyright (C) 1995-1999 Russell King * diff --git a/include/asm-arm/procinfo.h b/arch/arm/include/asm/procinfo.h similarity index 97% rename from include/asm-arm/procinfo.h rename to arch/arm/include/asm/procinfo.h index 4d3c685075e0..ca52e584ef74 100644 --- a/include/asm-arm/procinfo.h +++ b/arch/arm/include/asm/procinfo.h @@ -1,5 +1,5 @@ /* - * linux/include/asm-arm/procinfo.h + * arch/arm/include/asm/procinfo.h * * Copyright (C) 1996-1999 Russell King * diff --git a/include/asm-arm/ptrace.h b/arch/arm/include/asm/ptrace.h similarity index 99% rename from include/asm-arm/ptrace.h rename to arch/arm/include/asm/ptrace.h index 8382b7510f94..b415c0e85458 100644 --- a/include/asm-arm/ptrace.h +++ b/arch/arm/include/asm/ptrace.h @@ -1,5 +1,5 @@ /* - * linux/include/asm-arm/ptrace.h + * arch/arm/include/asm/ptrace.h * * Copyright (C) 1996-2003 Russell King * diff --git a/include/asm-arm/resource.h b/arch/arm/include/asm/resource.h similarity index 100% rename from include/asm-arm/resource.h rename to arch/arm/include/asm/resource.h diff --git a/include/asm-arm/scatterlist.h b/arch/arm/include/asm/scatterlist.h similarity index 100% rename from include/asm-arm/scatterlist.h rename to arch/arm/include/asm/scatterlist.h diff --git a/include/asm-arm/sections.h b/arch/arm/include/asm/sections.h similarity index 100% rename from include/asm-arm/sections.h rename to arch/arm/include/asm/sections.h diff --git a/include/asm-arm/segment.h b/arch/arm/include/asm/segment.h similarity index 100% rename from include/asm-arm/segment.h rename to arch/arm/include/asm/segment.h diff --git a/include/asm-arm/sembuf.h b/arch/arm/include/asm/sembuf.h similarity index 100% rename from include/asm-arm/sembuf.h rename to arch/arm/include/asm/sembuf.h diff --git a/include/asm-arm/serial.h b/arch/arm/include/asm/serial.h similarity index 91% rename from include/asm-arm/serial.h rename to arch/arm/include/asm/serial.h index 015b262dc145..ebb049091e26 100644 --- a/include/asm-arm/serial.h +++ b/arch/arm/include/asm/serial.h @@ -1,5 +1,5 @@ /* - * linux/include/asm-arm/serial.h + * arch/arm/include/asm/serial.h * * Copyright (C) 1996 Russell King. * diff --git a/include/asm-arm/setup.h b/arch/arm/include/asm/setup.h similarity index 100% rename from include/asm-arm/setup.h rename to arch/arm/include/asm/setup.h diff --git a/include/asm-arm/shmbuf.h b/arch/arm/include/asm/shmbuf.h similarity index 100% rename from include/asm-arm/shmbuf.h rename to arch/arm/include/asm/shmbuf.h diff --git a/include/asm-arm/shmparam.h b/arch/arm/include/asm/shmparam.h similarity index 100% rename from include/asm-arm/shmparam.h rename to arch/arm/include/asm/shmparam.h diff --git a/include/asm-arm/sigcontext.h b/arch/arm/include/asm/sigcontext.h similarity index 100% rename from include/asm-arm/sigcontext.h rename to arch/arm/include/asm/sigcontext.h diff --git a/include/asm-arm/siginfo.h b/arch/arm/include/asm/siginfo.h similarity index 100% rename from include/asm-arm/siginfo.h rename to arch/arm/include/asm/siginfo.h diff --git a/include/asm-arm/signal.h b/arch/arm/include/asm/signal.h similarity index 100% rename from include/asm-arm/signal.h rename to arch/arm/include/asm/signal.h diff --git a/include/asm-arm/sizes.h b/arch/arm/include/asm/sizes.h similarity index 100% rename from include/asm-arm/sizes.h rename to arch/arm/include/asm/sizes.h diff --git a/include/asm-arm/smp.h b/arch/arm/include/asm/smp.h similarity index 96% rename from include/asm-arm/smp.h rename to arch/arm/include/asm/smp.h index 7fffa2404b8e..727b5c042e52 100644 --- a/include/asm-arm/smp.h +++ b/arch/arm/include/asm/smp.h @@ -1,5 +1,5 @@ /* - * linux/include/asm-arm/smp.h + * arch/arm/include/asm/smp.h * * Copyright (C) 2004-2005 ARM Ltd. * @@ -14,10 +14,10 @@ #include #include -#include +#include #ifndef CONFIG_SMP -# error " included in non-SMP build" +# error " included in non-SMP build" #endif #define raw_smp_processor_id() (current_thread_info()->cpu) diff --git a/include/asm-arm/socket.h b/arch/arm/include/asm/socket.h similarity index 100% rename from include/asm-arm/socket.h rename to arch/arm/include/asm/socket.h diff --git a/include/asm-arm/sockios.h b/arch/arm/include/asm/sockios.h similarity index 100% rename from include/asm-arm/sockios.h rename to arch/arm/include/asm/sockios.h diff --git a/include/asm-arm/sparsemem.h b/arch/arm/include/asm/sparsemem.h similarity index 100% rename from include/asm-arm/sparsemem.h rename to arch/arm/include/asm/sparsemem.h diff --git a/include/asm-arm/spinlock.h b/arch/arm/include/asm/spinlock.h similarity index 100% rename from include/asm-arm/spinlock.h rename to arch/arm/include/asm/spinlock.h diff --git a/include/asm-arm/spinlock_types.h b/arch/arm/include/asm/spinlock_types.h similarity index 100% rename from include/asm-arm/spinlock_types.h rename to arch/arm/include/asm/spinlock_types.h diff --git a/include/asm-arm/stat.h b/arch/arm/include/asm/stat.h similarity index 100% rename from include/asm-arm/stat.h rename to arch/arm/include/asm/stat.h diff --git a/include/asm-arm/statfs.h b/arch/arm/include/asm/statfs.h similarity index 100% rename from include/asm-arm/statfs.h rename to arch/arm/include/asm/statfs.h diff --git a/include/asm-arm/string.h b/arch/arm/include/asm/string.h similarity index 100% rename from include/asm-arm/string.h rename to arch/arm/include/asm/string.h diff --git a/include/asm-arm/suspend.h b/arch/arm/include/asm/suspend.h similarity index 100% rename from include/asm-arm/suspend.h rename to arch/arm/include/asm/suspend.h diff --git a/include/asm-arm/system.h b/arch/arm/include/asm/system.h similarity index 100% rename from include/asm-arm/system.h rename to arch/arm/include/asm/system.h diff --git a/include/asm-arm/termbits.h b/arch/arm/include/asm/termbits.h similarity index 100% rename from include/asm-arm/termbits.h rename to arch/arm/include/asm/termbits.h diff --git a/include/asm-arm/termios.h b/arch/arm/include/asm/termios.h similarity index 100% rename from include/asm-arm/termios.h rename to arch/arm/include/asm/termios.h diff --git a/include/asm-arm/therm.h b/arch/arm/include/asm/therm.h similarity index 88% rename from include/asm-arm/therm.h rename to arch/arm/include/asm/therm.h index e51c923ecdf3..f002f0197d78 100644 --- a/include/asm-arm/therm.h +++ b/arch/arm/include/asm/therm.h @@ -1,5 +1,5 @@ /* - * linux/include/asm-arm/therm.h: Definitions for Dallas Semiconductor + * arch/arm/include/asm/therm.h: Definitions for Dallas Semiconductor * DS1620 thermometer driver (as used in the Rebel.com NetWinder) */ #ifndef __ASM_THERM_H diff --git a/include/asm-arm/thread_info.h b/arch/arm/include/asm/thread_info.h similarity index 97% rename from include/asm-arm/thread_info.h rename to arch/arm/include/asm/thread_info.h index d4be2d646160..e56fa48e4ae7 100644 --- a/include/asm-arm/thread_info.h +++ b/arch/arm/include/asm/thread_info.h @@ -1,5 +1,5 @@ /* - * linux/include/asm-arm/thread_info.h + * arch/arm/include/asm/thread_info.h * * Copyright (C) 2002 Russell King. * @@ -117,7 +117,7 @@ extern void iwmmxt_task_switch(struct thread_info *); /* * We use bit 30 of the preempt_count to indicate that kernel - * preemption is occurring. See include/asm-arm/hardirq.h. + * preemption is occurring. See . */ #define PREEMPT_ACTIVE 0x40000000 diff --git a/include/asm-arm/thread_notify.h b/arch/arm/include/asm/thread_notify.h similarity index 96% rename from include/asm-arm/thread_notify.h rename to arch/arm/include/asm/thread_notify.h index 8866e5216840..f27379d7f72a 100644 --- a/include/asm-arm/thread_notify.h +++ b/arch/arm/include/asm/thread_notify.h @@ -1,5 +1,5 @@ /* - * linux/include/asm-arm/thread_notify.h + * arch/arm/include/asm/thread_notify.h * * Copyright (C) 2006 Russell King. * diff --git a/include/asm-arm/timex.h b/arch/arm/include/asm/timex.h similarity index 87% rename from include/asm-arm/timex.h rename to arch/arm/include/asm/timex.h index 7b8d4cb24be0..3be8de3adaba 100644 --- a/include/asm-arm/timex.h +++ b/arch/arm/include/asm/timex.h @@ -1,5 +1,5 @@ /* - * linux/include/asm-arm/timex.h + * arch/arm/include/asm/timex.h * * Copyright (C) 1997,1998 Russell King * @@ -12,7 +12,7 @@ #ifndef _ASMARM_TIMEX_H #define _ASMARM_TIMEX_H -#include +#include typedef unsigned long cycles_t; diff --git a/include/asm-arm/tlb.h b/arch/arm/include/asm/tlb.h similarity index 98% rename from include/asm-arm/tlb.h rename to arch/arm/include/asm/tlb.h index 36bd402a21cb..857f1dfac794 100644 --- a/include/asm-arm/tlb.h +++ b/arch/arm/include/asm/tlb.h @@ -1,5 +1,5 @@ /* - * linux/include/asm-arm/tlb.h + * arch/arm/include/asm/tlb.h * * Copyright (C) 2002 Russell King * diff --git a/include/asm-arm/tlbflush.h b/arch/arm/include/asm/tlbflush.h similarity index 99% rename from include/asm-arm/tlbflush.h rename to arch/arm/include/asm/tlbflush.h index 909656c747ef..0d0d40f1b599 100644 --- a/include/asm-arm/tlbflush.h +++ b/arch/arm/include/asm/tlbflush.h @@ -1,5 +1,5 @@ /* - * linux/include/asm-arm/tlbflush.h + * arch/arm/include/asm/tlbflush.h * * Copyright (C) 1999-2003 Russell King * diff --git a/include/asm-arm/topology.h b/arch/arm/include/asm/topology.h similarity index 100% rename from include/asm-arm/topology.h rename to arch/arm/include/asm/topology.h diff --git a/include/asm-arm/traps.h b/arch/arm/include/asm/traps.h similarity index 100% rename from include/asm-arm/traps.h rename to arch/arm/include/asm/traps.h diff --git a/include/asm-arm/types.h b/arch/arm/include/asm/types.h similarity index 100% rename from include/asm-arm/types.h rename to arch/arm/include/asm/types.h diff --git a/include/asm-arm/uaccess.h b/arch/arm/include/asm/uaccess.h similarity index 99% rename from include/asm-arm/uaccess.h rename to arch/arm/include/asm/uaccess.h index 4c1a3fa9f259..d0f51ff900b5 100644 --- a/include/asm-arm/uaccess.h +++ b/arch/arm/include/asm/uaccess.h @@ -1,5 +1,5 @@ /* - * linux/include/asm-arm/uaccess.h + * arch/arm/include/asm/uaccess.h * * This program is free software; you can redistribute it and/or modify * it under the terms of the GNU General Public License version 2 as diff --git a/include/asm-arm/ucontext.h b/arch/arm/include/asm/ucontext.h similarity index 100% rename from include/asm-arm/ucontext.h rename to arch/arm/include/asm/ucontext.h diff --git a/include/asm-arm/unaligned.h b/arch/arm/include/asm/unaligned.h similarity index 100% rename from include/asm-arm/unaligned.h rename to arch/arm/include/asm/unaligned.h diff --git a/include/asm-arm/unistd.h b/arch/arm/include/asm/unistd.h similarity index 99% rename from include/asm-arm/unistd.h rename to arch/arm/include/asm/unistd.h index 7c570082b1e0..f95fbb2fcb5f 100644 --- a/include/asm-arm/unistd.h +++ b/arch/arm/include/asm/unistd.h @@ -1,5 +1,5 @@ /* - * linux/include/asm-arm/unistd.h + * arch/arm/include/asm/unistd.h * * Copyright (C) 2001-2005 Russell King * diff --git a/include/asm-arm/user.h b/arch/arm/include/asm/user.h similarity index 100% rename from include/asm-arm/user.h rename to arch/arm/include/asm/user.h diff --git a/include/asm-arm/vfp.h b/arch/arm/include/asm/vfp.h similarity index 98% rename from include/asm-arm/vfp.h rename to arch/arm/include/asm/vfp.h index 5f9a2cb3d452..f4ab34fd4f72 100644 --- a/include/asm-arm/vfp.h +++ b/arch/arm/include/asm/vfp.h @@ -1,5 +1,5 @@ /* - * linux/include/asm-arm/vfp.h + * arch/arm/include/asm/vfp.h * * VFP register definitions. * First, the standard VFP set. diff --git a/include/asm-arm/vfpmacros.h b/arch/arm/include/asm/vfpmacros.h similarity index 97% rename from include/asm-arm/vfpmacros.h rename to arch/arm/include/asm/vfpmacros.h index cccb3892e73c..422f3cc204a2 100644 --- a/include/asm-arm/vfpmacros.h +++ b/arch/arm/include/asm/vfpmacros.h @@ -1,5 +1,5 @@ /* - * linux/include/asm-arm/vfpmacros.h + * arch/arm/include/asm/vfpmacros.h * * Assembler-only file containing VFP macros and register definitions. */ diff --git a/include/asm-arm/vga.h b/arch/arm/include/asm/vga.h similarity index 89% rename from include/asm-arm/vga.h rename to arch/arm/include/asm/vga.h index 1e0b913c3d71..6a3cd2a2f670 100644 --- a/include/asm-arm/vga.h +++ b/arch/arm/include/asm/vga.h @@ -1,7 +1,7 @@ #ifndef ASMARM_VGA_H #define ASMARM_VGA_H -#include +#include #include #define VGA_MAP_MEM(x,s) (PCIMEM_BASE + (x)) diff --git a/include/asm-arm/xor.h b/arch/arm/include/asm/xor.h similarity index 99% rename from include/asm-arm/xor.h rename to arch/arm/include/asm/xor.h index e7c4cf58bed1..7604673dc427 100644 --- a/include/asm-arm/xor.h +++ b/arch/arm/include/asm/xor.h @@ -1,5 +1,5 @@ /* - * linux/include/asm-arm/xor.h + * arch/arm/include/asm/xor.h * * Copyright (C) 2001 Russell King * diff --git a/arch/arm/kernel/crunch-bits.S b/arch/arm/kernel/crunch-bits.S index a26886758c67..0ec9bb48fab9 100644 --- a/arch/arm/kernel/crunch-bits.S +++ b/arch/arm/kernel/crunch-bits.S @@ -16,7 +16,7 @@ #include #include #include -#include +#include /* * We can't use hex constants here due to a bug in gas. diff --git a/arch/arm/kernel/crunch.c b/arch/arm/kernel/crunch.c index 627d79414c9d..3b6a1c293ee4 100644 --- a/arch/arm/kernel/crunch.c +++ b/arch/arm/kernel/crunch.c @@ -15,7 +15,7 @@ #include #include #include -#include +#include #include #include diff --git a/arch/arm/kernel/debug.S b/arch/arm/kernel/debug.S index 5617566477b4..9550ff0ddde4 100644 --- a/arch/arm/kernel/debug.S +++ b/arch/arm/kernel/debug.S @@ -80,7 +80,7 @@ #endif /* CONFIG_CPU_V6 */ #else -#include +#include #endif /* CONFIG_DEBUG_ICEDCC */ /* diff --git a/arch/arm/kernel/ecard.c b/arch/arm/kernel/ecard.c index f5cfdabcb87d..7a50575a8d4d 100644 --- a/arch/arm/kernel/ecard.c +++ b/arch/arm/kernel/ecard.c @@ -46,7 +46,7 @@ #include #include -#include +#include #include #include #include diff --git a/arch/arm/kernel/entry-armv.S b/arch/arm/kernel/entry-armv.S index 7dca225752c1..617e509d60df 100644 --- a/arch/arm/kernel/entry-armv.S +++ b/arch/arm/kernel/entry-armv.S @@ -18,7 +18,7 @@ #include #include #include -#include +#include #include #include "entry-header.S" diff --git a/arch/arm/kernel/entry-common.S b/arch/arm/kernel/entry-common.S index 84694e88b428..060d7e2e9f64 100644 --- a/arch/arm/kernel/entry-common.S +++ b/arch/arm/kernel/entry-common.S @@ -10,7 +10,7 @@ #include #include -#include +#include #include "entry-header.S" diff --git a/arch/arm/kernel/head-common.S b/arch/arm/kernel/head-common.S index 7e9c00a8a412..1c3c6ea5f9e7 100644 --- a/arch/arm/kernel/head-common.S +++ b/arch/arm/kernel/head-common.S @@ -181,7 +181,7 @@ ENTRY(lookup_processor_type) ldmfd sp!, {r4 - r7, r9, pc} /* - * Look in include/asm-arm/procinfo.h and arch/arm/kernel/arch.[ch] for + * Look in and arch/arm/kernel/arch.[ch] for * more information about the __proc_info and __arch_info structures. */ .long __proc_info_begin diff --git a/arch/arm/kernel/head-nommu.S b/arch/arm/kernel/head-nommu.S index 5d78ffb8a9a7..27329bd32037 100644 --- a/arch/arm/kernel/head-nommu.S +++ b/arch/arm/kernel/head-nommu.S @@ -15,7 +15,6 @@ #include #include -#include #include #include #include diff --git a/arch/arm/kernel/irq.c b/arch/arm/kernel/irq.c index 11dcd52e51be..f88efb135b70 100644 --- a/arch/arm/kernel/irq.c +++ b/arch/arm/kernel/irq.c @@ -38,6 +38,7 @@ #include #include +#include #include /* diff --git a/arch/arm/kernel/process.c b/arch/arm/kernel/process.c index 89bfded70a1f..3fd882337064 100644 --- a/arch/arm/kernel/process.c +++ b/arch/arm/kernel/process.c @@ -51,7 +51,7 @@ extern void setup_mm_for_reboot(char mode); static volatile int hlt_counter; -#include +#include void disable_hlt(void) { diff --git a/arch/arm/kernel/smp.c b/arch/arm/kernel/smp.c index 5a7c09564d13..e9842f6767f9 100644 --- a/arch/arm/kernel/smp.c +++ b/arch/arm/kernel/smp.c @@ -100,7 +100,7 @@ int __cpuinit __cpu_up(unsigned int cpu) * a 1:1 mapping for the physical address of the kernel. */ pgd = pgd_alloc(&init_mm); - pmd = pmd_offset(pgd, PHYS_OFFSET); + pmd = pmd_offset(pgd + pgd_index(PHYS_OFFSET), PHYS_OFFSET); *pmd = __pmd((PHYS_OFFSET & PGDIR_MASK) | PMD_TYPE_SECT | PMD_SECT_AP_WRITE); @@ -139,7 +139,7 @@ int __cpuinit __cpu_up(unsigned int cpu) secondary_data.stack = NULL; secondary_data.pgdir = 0; - *pmd_offset(pgd, PHYS_OFFSET) = __pmd(0); + *pmd = __pmd(0); pgd_free(&init_mm, pgd); if (ret) { diff --git a/arch/arm/lib/ecard.S b/arch/arm/lib/ecard.S index c55aaa2a2088..8678eb2b7a60 100644 --- a/arch/arm/lib/ecard.S +++ b/arch/arm/lib/ecard.S @@ -12,7 +12,7 @@ */ #include #include -#include +#include #define CPSR2SPSR(rt) \ mrs rt, cpsr; \ diff --git a/arch/arm/lib/getuser.S b/arch/arm/lib/getuser.S index 1dd8ea4f9a9c..2034d4dbe6ad 100644 --- a/arch/arm/lib/getuser.S +++ b/arch/arm/lib/getuser.S @@ -20,7 +20,7 @@ * r2, r3 contains the zero-extended value * lr corrupted * - * No other registers must be altered. (see include/asm-arm/uaccess.h + * No other registers must be altered. (see * for specific ASM register usage). * * Note that ADDR_LIMIT is either 0 or 0xc0000000. diff --git a/arch/arm/lib/io-readsw-armv3.S b/arch/arm/lib/io-readsw-armv3.S index 4ef904185142..9aaf7c72065d 100644 --- a/arch/arm/lib/io-readsw-armv3.S +++ b/arch/arm/lib/io-readsw-armv3.S @@ -9,7 +9,7 @@ */ #include #include -#include +#include .Linsw_bad_alignment: adr r0, .Linsw_bad_align_msg diff --git a/arch/arm/lib/io-writesw-armv3.S b/arch/arm/lib/io-writesw-armv3.S index 1607a29f49b7..cd34503e424d 100644 --- a/arch/arm/lib/io-writesw-armv3.S +++ b/arch/arm/lib/io-writesw-armv3.S @@ -9,7 +9,7 @@ */ #include #include -#include +#include .Loutsw_bad_alignment: adr r0, .Loutsw_bad_align_msg diff --git a/arch/arm/lib/putuser.S b/arch/arm/lib/putuser.S index 8620afe54f72..08ec7dffa52e 100644 --- a/arch/arm/lib/putuser.S +++ b/arch/arm/lib/putuser.S @@ -20,7 +20,7 @@ * Outputs: r0 is the error code * lr corrupted * - * No other registers must be altered. (see include/asm-arm/uaccess.h + * No other registers must be altered. (see * for specific ASM register usage). * * Note that ADDR_LIMIT is either 0 or 0xc0000000 diff --git a/arch/arm/mach-aaec2000/aaed2000.c b/arch/arm/mach-aaec2000/aaed2000.c index 83f57da3184c..81a3ecc0d104 100644 --- a/arch/arm/mach-aaec2000/aaed2000.c +++ b/arch/arm/mach-aaec2000/aaed2000.c @@ -20,14 +20,14 @@ #include #include #include -#include +#include #include #include #include #include -#include +#include #include "core.h" diff --git a/arch/arm/mach-aaec2000/core.c b/arch/arm/mach-aaec2000/core.c index b016be2b0e35..dfb26bc23d1a 100644 --- a/arch/arm/mach-aaec2000/core.c +++ b/arch/arm/mach-aaec2000/core.c @@ -20,7 +20,7 @@ #include #include -#include +#include #include #include diff --git a/include/asm-arm/arch-aaec2000/aaec2000.h b/arch/arm/mach-aaec2000/include/mach/aaec2000.h similarity index 99% rename from include/asm-arm/arch-aaec2000/aaec2000.h rename to arch/arm/mach-aaec2000/include/mach/aaec2000.h index a6d1ee0980f2..bc729c42f843 100644 --- a/include/asm-arm/arch-aaec2000/aaec2000.h +++ b/arch/arm/mach-aaec2000/include/mach/aaec2000.h @@ -1,5 +1,5 @@ /* - * linux/include/asm-arm/arch-aaec2000/aaec2000.h + * arch/arm/mach-aaec2000/include/mach/aaec2000.h * * AAEC-2000 registers definition * diff --git a/include/asm-arm/arch-aaec2000/aaed2000.h b/arch/arm/mach-aaec2000/include/mach/aaed2000.h similarity index 96% rename from include/asm-arm/arch-aaec2000/aaed2000.h rename to arch/arm/mach-aaec2000/include/mach/aaed2000.h index bc76d2badb91..f821295ca71b 100644 --- a/include/asm-arm/arch-aaec2000/aaed2000.h +++ b/arch/arm/mach-aaec2000/include/mach/aaed2000.h @@ -1,5 +1,5 @@ /* - * linux/include/asm-arm/arch-aaec2000/aaed2000.h + * arch/arm/mach-aaec2000/include/mach/aaed2000.h * * AAED-2000 specific bits definition * diff --git a/include/asm-arm/arch-aaec2000/debug-macro.S b/arch/arm/mach-aaec2000/include/mach/debug-macro.S similarity index 93% rename from include/asm-arm/arch-aaec2000/debug-macro.S rename to arch/arm/mach-aaec2000/include/mach/debug-macro.S index 7b1fce021d8a..0b6351d7c389 100644 --- a/include/asm-arm/arch-aaec2000/debug-macro.S +++ b/arch/arm/mach-aaec2000/include/mach/debug-macro.S @@ -1,4 +1,4 @@ -/* linux/include/asm-arm/arch-aaec2000/debug-macro.S +/* arch/arm/mach-aaec2000/include/mach/debug-macro.S * * Debugging macro include header * diff --git a/include/asm-arm/arch-aaec2000/dma.h b/arch/arm/mach-aaec2000/include/mach/dma.h similarity index 84% rename from include/asm-arm/arch-aaec2000/dma.h rename to arch/arm/mach-aaec2000/include/mach/dma.h index e100b1e526fe..2da846c72fe7 100644 --- a/include/asm-arm/arch-aaec2000/dma.h +++ b/arch/arm/mach-aaec2000/include/mach/dma.h @@ -1,5 +1,5 @@ /* - * linux/include/asm-arm/arch-aaec2000/dma.h + * arch/arm/mach-aaec2000/include/mach/dma.h * * Copyright (c) 2005 Nicolas Bellido Y Ortega * diff --git a/include/asm-arm/arch-aaec2000/entry-macro.S b/arch/arm/mach-aaec2000/include/mach/entry-macro.S similarity index 91% rename from include/asm-arm/arch-aaec2000/entry-macro.S rename to arch/arm/mach-aaec2000/include/mach/entry-macro.S index 83fdf68f6b7c..c8fb34469007 100644 --- a/include/asm-arm/arch-aaec2000/entry-macro.S +++ b/arch/arm/mach-aaec2000/include/mach/entry-macro.S @@ -1,5 +1,5 @@ /* - * linux/include/asm-arm/arch-aaec2000/entry-macro.S + * arch/arm/mach-aaec2000/include/mach/entry-macro.S * * Low-level IRQ helper for aaec-2000 based platforms * @@ -10,7 +10,7 @@ * published by the Free Software Foundation. * */ -#include +#include .macro disable_fiq .endm diff --git a/include/asm-arm/arch-aaec2000/hardware.h b/arch/arm/mach-aaec2000/include/mach/hardware.h similarity index 93% rename from include/asm-arm/arch-aaec2000/hardware.h rename to arch/arm/mach-aaec2000/include/mach/hardware.h index 153506fd06ed..965a6f6672d6 100644 --- a/include/asm-arm/arch-aaec2000/hardware.h +++ b/arch/arm/mach-aaec2000/include/mach/hardware.h @@ -1,5 +1,5 @@ /* - * linux/include/asm-arm/arch-aaec2000/hardware.h + * arch/arm/mach-aaec2000/include/mach/hardware.h * * Copyright (c) 2005 Nicolas Bellido Y Ortega * @@ -12,7 +12,7 @@ #define __ASM_ARCH_HARDWARE_H #include -#include +#include /* The kernel is loaded at physical address 0xf8000000. * We map the IO space a bit after diff --git a/include/asm-arm/arch-aaec2000/io.h b/arch/arm/mach-aaec2000/include/mach/io.h similarity index 83% rename from include/asm-arm/arch-aaec2000/io.h rename to arch/arm/mach-aaec2000/include/mach/io.h index d710204ac747..c87c24de1110 100644 --- a/include/asm-arm/arch-aaec2000/io.h +++ b/arch/arm/mach-aaec2000/include/mach/io.h @@ -1,12 +1,12 @@ /* - * linux/include/asm-arm/arch-aaec2000/io.h + * arch/arm/mach-aaec2000/include/mach/io.h * * Copied from asm/arch/sa1100/io.h */ #ifndef __ASM_ARM_ARCH_IO_H #define __ASM_ARM_ARCH_IO_H -#include +#include #define IO_SPACE_LIMIT 0xffffffff diff --git a/include/asm-arm/arch-aaec2000/irqs.h b/arch/arm/mach-aaec2000/include/mach/irqs.h similarity index 97% rename from include/asm-arm/arch-aaec2000/irqs.h rename to arch/arm/mach-aaec2000/include/mach/irqs.h index de252220e806..bf45c6d2f294 100644 --- a/include/asm-arm/arch-aaec2000/irqs.h +++ b/arch/arm/mach-aaec2000/include/mach/irqs.h @@ -1,5 +1,5 @@ /* - * linux/include/asm-arm/arch-aaec2000/irqs.h + * arch/arm/mach-aaec2000/include/mach/irqs.h * * Copyright (c) 2005 Nicolas Bellido Y Ortega * diff --git a/include/asm-arm/arch-aaec2000/memory.h b/arch/arm/mach-aaec2000/include/mach/memory.h similarity index 93% rename from include/asm-arm/arch-aaec2000/memory.h rename to arch/arm/mach-aaec2000/include/mach/memory.h index 9eceb4148922..56ae900a482e 100644 --- a/include/asm-arm/arch-aaec2000/memory.h +++ b/arch/arm/mach-aaec2000/include/mach/memory.h @@ -1,5 +1,5 @@ /* - * linux/include/asm-arm/arch-aaec2000/memory.h + * arch/arm/mach-aaec2000/include/mach/memory.h * * Copyright (c) 2005 Nicolas Bellido Y Ortega * diff --git a/include/asm-arm/arch-aaec2000/system.h b/arch/arm/mach-aaec2000/include/mach/system.h similarity index 90% rename from include/asm-arm/arch-aaec2000/system.h rename to arch/arm/mach-aaec2000/include/mach/system.h index 08de97b407a8..8f4115d734ce 100644 --- a/include/asm-arm/arch-aaec2000/system.h +++ b/arch/arm/mach-aaec2000/include/mach/system.h @@ -1,5 +1,5 @@ /* - * linux/include/asm-arm/arch-aaed2000/system.h + * arch/arm/mach-aaed2000/include/mach/system.h * * Copyright (c) 2005 Nicolas Bellido Y Ortega * diff --git a/include/asm-arm/arch-aaec2000/timex.h b/arch/arm/mach-aaec2000/include/mach/timex.h similarity index 89% rename from include/asm-arm/arch-aaec2000/timex.h rename to arch/arm/mach-aaec2000/include/mach/timex.h index f5708b38fb7f..6c8edf4a8828 100644 --- a/include/asm-arm/arch-aaec2000/timex.h +++ b/arch/arm/mach-aaec2000/include/mach/timex.h @@ -1,5 +1,5 @@ /* - * linux/include/asm-arm/arch-aaec2000/timex.h + * arch/arm/mach-aaec2000/include/mach/timex.h * * AAEC-2000 Architecture timex specification * diff --git a/include/asm-arm/arch-aaec2000/uncompress.h b/arch/arm/mach-aaec2000/include/mach/uncompress.h similarity index 94% rename from include/asm-arm/arch-aaec2000/uncompress.h rename to arch/arm/mach-aaec2000/include/mach/uncompress.h index 300f4bf3bc74..381ecad1a1bb 100644 --- a/include/asm-arm/arch-aaec2000/uncompress.h +++ b/arch/arm/mach-aaec2000/include/mach/uncompress.h @@ -1,5 +1,5 @@ /* - * linux/include/asm-arm/arch-aaec2000/uncompress.h + * arch/arm/mach-aaec2000/include/mach/uncompress.h * * Copyright (c) 2005 Nicolas Bellido Y Ortega * diff --git a/include/asm-arm/arch-aaec2000/vmalloc.h b/arch/arm/mach-aaec2000/include/mach/vmalloc.h similarity index 88% rename from include/asm-arm/arch-aaec2000/vmalloc.h rename to arch/arm/mach-aaec2000/include/mach/vmalloc.h index ecb991e2e4ff..551f68f666bf 100644 --- a/include/asm-arm/arch-aaec2000/vmalloc.h +++ b/arch/arm/mach-aaec2000/include/mach/vmalloc.h @@ -1,5 +1,5 @@ /* - * linux/include/asm-arm/arch-aaec2000/vmalloc.h + * arch/arm/mach-aaec2000/include/mach/vmalloc.h * * Copyright (c) 2005 Nicolas Bellido Y Ortega * diff --git a/arch/arm/mach-at91/Kconfig b/arch/arm/mach-at91/Kconfig index 5bad6b9b00d7..a048b92cb407 100644 --- a/arch/arm/mach-at91/Kconfig +++ b/arch/arm/mach-at91/Kconfig @@ -297,7 +297,7 @@ config MTD_AT91_DATAFLASH_CARD help Enable support for the DataFlash card. -config MTD_NAND_AT91_BUSWIDTH_16 +config MTD_NAND_ATMEL_BUSWIDTH_16 bool "Enable 16-bit data bus interface to NAND flash" depends on (MACH_AT91SAM9260EK || MACH_AT91SAM9261EK || MACH_AT91SAM9263EK || MACH_AT91SAM9G20EK || MACH_AT91CAP9ADK) help diff --git a/arch/arm/mach-at91/at91cap9.c b/arch/arm/mach-at91/at91cap9.c index 933fa8f55cbc..638948c16770 100644 --- a/arch/arm/mach-at91/at91cap9.c +++ b/arch/arm/mach-at91/at91cap9.c @@ -17,10 +17,10 @@ #include #include -#include -#include -#include -#include +#include +#include +#include +#include #include "generic.h" #include "clock.h" diff --git a/arch/arm/mach-at91/at91cap9_devices.c b/arch/arm/mach-at91/at91cap9_devices.c index dc8b40783d94..abb4aac8fa98 100644 --- a/arch/arm/mach-at91/at91cap9_devices.c +++ b/arch/arm/mach-at91/at91cap9_devices.c @@ -20,11 +20,11 @@ #include