Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net

Cross-merge networking fixes after downstream PR.

No conflicts or adjacent changes.

Signed-off-by: Jakub Kicinski <kuba@kernel.org>
This commit is contained in:
Jakub Kicinski 2024-02-01 14:33:26 -08:00
commit cf244463a2
413 changed files with 4294 additions and 2315 deletions

13
CREDITS
View File

@ -2161,6 +2161,19 @@ N: Mike Kravetz
E: mike.kravetz@oracle.com
D: Maintenance and development of the hugetlb subsystem
N: Seth Jennings
E: sjenning@redhat.com
D: Creation and maintenance of zswap
N: Dan Streetman
E: ddstreet@ieee.org
D: Maintenance and development of zswap
D: Creation and maintenance of the zpool API
N: Vitaly Wool
E: vitaly.wool@konsulko.com
D: Maintenance and development of zswap
N: Andreas S. Krebs
E: akrebs@altavista.net
D: CYPRESS CY82C693 chipset IDE, Digital's PC-Alpha 164SX boards

View File

@ -1,4 +1,4 @@
What: /sys/class/<iface>/queues/rx-<queue>/rps_cpus
What: /sys/class/net/<iface>/queues/rx-<queue>/rps_cpus
Date: March 2010
KernelVersion: 2.6.35
Contact: netdev@vger.kernel.org
@ -8,7 +8,7 @@ Description:
network device queue. Possible values depend on the number
of available CPU(s) in the system.
What: /sys/class/<iface>/queues/rx-<queue>/rps_flow_cnt
What: /sys/class/net/<iface>/queues/rx-<queue>/rps_flow_cnt
Date: April 2010
KernelVersion: 2.6.35
Contact: netdev@vger.kernel.org
@ -16,7 +16,7 @@ Description:
Number of Receive Packet Steering flows being currently
processed by this particular network device receive queue.
What: /sys/class/<iface>/queues/tx-<queue>/tx_timeout
What: /sys/class/net/<iface>/queues/tx-<queue>/tx_timeout
Date: November 2011
KernelVersion: 3.3
Contact: netdev@vger.kernel.org
@ -24,7 +24,7 @@ Description:
Indicates the number of transmit timeout events seen by this
network interface transmit queue.
What: /sys/class/<iface>/queues/tx-<queue>/tx_maxrate
What: /sys/class/net/<iface>/queues/tx-<queue>/tx_maxrate
Date: March 2015
KernelVersion: 4.1
Contact: netdev@vger.kernel.org
@ -32,7 +32,7 @@ Description:
A Mbps max-rate set for the queue, a value of zero means disabled,
default is disabled.
What: /sys/class/<iface>/queues/tx-<queue>/xps_cpus
What: /sys/class/net/<iface>/queues/tx-<queue>/xps_cpus
Date: November 2010
KernelVersion: 2.6.38
Contact: netdev@vger.kernel.org
@ -42,7 +42,7 @@ Description:
network device transmit queue. Possible values depend on the
number of available CPU(s) in the system.
What: /sys/class/<iface>/queues/tx-<queue>/xps_rxqs
What: /sys/class/net/<iface>/queues/tx-<queue>/xps_rxqs
Date: June 2018
KernelVersion: 4.18.0
Contact: netdev@vger.kernel.org
@ -53,7 +53,7 @@ Description:
number of available receive queue(s) in the network device.
Default is disabled.
What: /sys/class/<iface>/queues/tx-<queue>/byte_queue_limits/hold_time
What: /sys/class/net/<iface>/queues/tx-<queue>/byte_queue_limits/hold_time
Date: November 2011
KernelVersion: 3.3
Contact: netdev@vger.kernel.org
@ -62,7 +62,7 @@ Description:
of this particular network device transmit queue.
Default value is 1000.
What: /sys/class/<iface>/queues/tx-<queue>/byte_queue_limits/inflight
What: /sys/class/net/<iface>/queues/tx-<queue>/byte_queue_limits/inflight
Date: November 2011
KernelVersion: 3.3
Contact: netdev@vger.kernel.org
@ -70,7 +70,7 @@ Description:
Indicates the number of bytes (objects) in flight on this
network device transmit queue.
What: /sys/class/<iface>/queues/tx-<queue>/byte_queue_limits/limit
What: /sys/class/net/<iface>/queues/tx-<queue>/byte_queue_limits/limit
Date: November 2011
KernelVersion: 3.3
Contact: netdev@vger.kernel.org
@ -79,7 +79,7 @@ Description:
on this network device transmit queue. This value is clamped
to be within the bounds defined by limit_max and limit_min.
What: /sys/class/<iface>/queues/tx-<queue>/byte_queue_limits/limit_max
What: /sys/class/net/<iface>/queues/tx-<queue>/byte_queue_limits/limit_max
Date: November 2011
KernelVersion: 3.3
Contact: netdev@vger.kernel.org
@ -88,7 +88,7 @@ Description:
queued on this network device transmit queue. See
include/linux/dynamic_queue_limits.h for the default value.
What: /sys/class/<iface>/queues/tx-<queue>/byte_queue_limits/limit_min
What: /sys/class/net/<iface>/queues/tx-<queue>/byte_queue_limits/limit_min
Date: November 2011
KernelVersion: 3.3
Contact: netdev@vger.kernel.org

View File

@ -10,6 +10,7 @@ What: /sys/devices/platform/silicom-platform/power_cycle
Date: November 2023
KernelVersion: 6.7
Contact: Henry Shi <henrys@silicom-usa.com>
Description:
This file allow user to power cycle the platform.
Default value is 0; when set to 1, it powers down
the platform, waits 5 seconds, then powers on the

View File

@ -101,8 +101,8 @@ External References
email threads
-------------
* `Initial discussion on the New subsystem for acceleration devices <https://lkml.org/lkml/2022/7/31/83>`_ - Oded Gabbay (2022)
* `patch-set to add the new subsystem <https://lkml.org/lkml/2022/10/22/544>`_ - Oded Gabbay (2022)
* `Initial discussion on the New subsystem for acceleration devices <https://lore.kernel.org/lkml/CAFCwf11=9qpNAepL7NL+YAV_QO=Wv6pnWPhKHKAepK3fNn+2Dg@mail.gmail.com/>`_ - Oded Gabbay (2022)
* `patch-set to add the new subsystem <https://lore.kernel.org/lkml/20221022214622.18042-1-ogabbay@kernel.org/>`_ - Oded Gabbay (2022)
Conference talks
----------------

View File

@ -218,8 +218,3 @@ bytes respectively. Such letter suffixes can also be entirely omitted:
.. include:: kernel-parameters.txt
:literal:
Todo
----
Add more DRM drivers.

View File

@ -243,13 +243,9 @@ To reduce its OS jitter, do any of the following:
3. Do any of the following needed to avoid jitter that your
application cannot tolerate:
a. Build your kernel with CONFIG_SLUB=y rather than
CONFIG_SLAB=y, thus avoiding the slab allocator's periodic
use of each CPU's workqueues to run its cache_reap()
function.
b. Avoid using oprofile, thus avoiding OS jitter from
a. Avoid using oprofile, thus avoiding OS jitter from
wq_sync_buffer().
c. Limit your CPU frequency so that a CPU-frequency
b. Limit your CPU frequency so that a CPU-frequency
governor is not required, possibly enlisting the aid of
special heatsinks or other cooling technologies. If done
correctly, and if you CPU architecture permits, you should
@ -259,7 +255,7 @@ To reduce its OS jitter, do any of the following:
WARNING: Please check your CPU specifications to
make sure that this is safe on your particular system.
d. As of v3.18, Christoph Lameter's on-demand vmstat workers
c. As of v3.18, Christoph Lameter's on-demand vmstat workers
commit prevents OS jitter due to vmstat_update() on
CONFIG_SMP=y systems. Before v3.18, is not possible
to entirely get rid of the OS jitter, but you can
@ -274,7 +270,7 @@ To reduce its OS jitter, do any of the following:
(based on an earlier one from Gilad Ben-Yossef) that
reduces or even eliminates vmstat overhead for some
workloads at https://lore.kernel.org/r/00000140e9dfd6bd-40db3d4f-c1be-434f-8132-7820f81bb586-000000@email.amazonses.com.
e. If running on high-end powerpc servers, build with
d. If running on high-end powerpc servers, build with
CONFIG_PPC_RTAS_DAEMON=n. This prevents the RTAS
daemon from running on each CPU every second or so.
(This will require editing Kconfig files and will defeat
@ -282,12 +278,12 @@ To reduce its OS jitter, do any of the following:
due to the rtas_event_scan() function.
WARNING: Please check your CPU specifications to
make sure that this is safe on your particular system.
f. If running on Cell Processor, build your kernel with
e. If running on Cell Processor, build your kernel with
CBE_CPUFREQ_SPU_GOVERNOR=n to avoid OS jitter from
spu_gov_work().
WARNING: Please check your CPU specifications to
make sure that this is safe on your particular system.
g. If running on PowerMAC, build your kernel with
f. If running on PowerMAC, build your kernel with
CONFIG_PMAC_RACKMETER=n to disable the CPU-meter,
avoiding OS jitter from rackmeter_do_timer().

View File

@ -671,8 +671,23 @@ Testing Static Functions
------------------------
If we do not want to expose functions or variables for testing, one option is to
conditionally ``#include`` the test file at the end of your .c file. For
example:
conditionally export the used symbol. For example:
.. code-block:: c
/* In my_file.c */
VISIBLE_IF_KUNIT int do_interesting_thing();
EXPORT_SYMBOL_IF_KUNIT(do_interesting_thing);
/* In my_file.h */
#if IS_ENABLED(CONFIG_KUNIT)
int do_interesting_thing(void);
#endif
Alternatively, you could conditionally ``#include`` the test file at the end of
your .c file. For example:
.. code-block:: c

View File

@ -85,7 +85,7 @@ allOf:
clocks:
minItems: 6
maxItems: 6
regs:
reg:
minItems: 2
maxItems: 2
@ -99,7 +99,7 @@ allOf:
clocks:
minItems: 4
maxItems: 4
regs:
reg:
minItems: 2
maxItems: 2
@ -116,7 +116,7 @@ allOf:
clocks:
minItems: 3
maxItems: 3
regs:
reg:
minItems: 1
maxItems: 1

View File

@ -17,7 +17,7 @@ properties:
compatible:
items:
- enum:
- ti,k3-j721s2-wave521c
- ti,j721s2-wave521c
- const: cnm,wave521c
reg:
@ -53,7 +53,7 @@ additionalProperties: false
examples:
- |
vpu: video-codec@12345678 {
compatible = "ti,k3-j721s2-wave521c", "cnm,wave521c";
compatible = "ti,j721s2-wave521c", "cnm,wave521c";
reg = <0x12345678 0x1000>;
clocks = <&clks 42>;
interrupts = <42>;

View File

@ -942,6 +942,10 @@ attribute-sets:
-
name: gro-ipv4-max-size
type: u32
-
name: dpll-pin
type: nest
nested-attributes: link-dpll-pin-attrs
-
name: af-spec-attrs
attributes:
@ -1627,6 +1631,12 @@ attribute-sets:
-
name: used
type: u8
-
name: link-dpll-pin-attrs
attributes:
-
name: id
type: u32
sub-messages:
-

View File

@ -12,5 +12,7 @@
<script type="text/javascript"> <!--
var sbar = document.getElementsByClassName("sphinxsidebar")[0];
let currents = document.getElementsByClassName("current")
sbar.scrollTop = currents[currents.length - 1].offsetTop;
if (currents.length) {
sbar.scrollTop = currents[currents.length - 1].offsetTop;
}
--> </script>

View File

@ -3168,10 +3168,10 @@ F: drivers/hwmon/asus-ec-sensors.c
ASUS NOTEBOOKS AND EEEPC ACPI/WMI EXTRAS DRIVERS
M: Corentin Chary <corentin.chary@gmail.com>
L: acpi4asus-user@lists.sourceforge.net
M: Luke D. Jones <luke@ljones.dev>
L: platform-driver-x86@vger.kernel.org
S: Maintained
W: http://acpi4asus.sf.net
W: https://asus-linux.org/
F: drivers/platform/x86/asus*.c
F: drivers/platform/x86/eeepc*.c
@ -5961,7 +5961,6 @@ S: Maintained
F: drivers/platform/x86/dell/dell-wmi-descriptor.c
DELL WMI HARDWARE PRIVACY SUPPORT
M: Perry Yuan <Perry.Yuan@dell.com>
L: Dell.Client.Kernel@dell.com
L: platform-driver-x86@vger.kernel.org
S: Maintained
@ -10287,7 +10286,7 @@ F: drivers/scsi/ibmvscsi/ibmvscsi*
F: include/scsi/viosrp.h
IBM Power Virtual SCSI Device Target Driver
M: Michael Cyr <mikecyr@linux.ibm.com>
M: Tyrel Datwyler <tyreld@linux.ibm.com>
L: linux-scsi@vger.kernel.org
L: target-devel@vger.kernel.org
S: Supported
@ -11729,6 +11728,7 @@ F: fs/smb/server/
KERNEL UNIT TESTING FRAMEWORK (KUnit)
M: Brendan Higgins <brendanhiggins@google.com>
M: David Gow <davidgow@google.com>
R: Rae Moar <rmoar@google.com>
L: linux-kselftest@vger.kernel.org
L: kunit-dev@googlegroups.com
S: Maintained
@ -12907,6 +12907,8 @@ M: Alejandro Colomar <alx@kernel.org>
L: linux-man@vger.kernel.org
S: Maintained
W: http://www.kernel.org/doc/man-pages
T: git git://git.kernel.org/pub/scm/docs/man-pages/man-pages.git
T: git git://www.alejandro-colomar.es/src/alx/linux/man-pages/man-pages.git
MANAGEMENT COMPONENT TRANSPORT PROTOCOL (MCTP)
M: Jeremy Kerr <jk@codeconstruct.com.au>
@ -15182,6 +15184,7 @@ F: Documentation/networking/net_cachelines/net_device.rst
F: drivers/connector/
F: drivers/net/
F: include/dt-bindings/net/
F: include/linux/cn_proc.h
F: include/linux/etherdevice.h
F: include/linux/fcdevice.h
F: include/linux/fddidevice.h
@ -15189,6 +15192,7 @@ F: include/linux/hippidevice.h
F: include/linux/if_*
F: include/linux/inetdevice.h
F: include/linux/netdevice.h
F: include/uapi/linux/cn_proc.h
F: include/uapi/linux/if_*
F: include/uapi/linux/netdevice.h
X: drivers/net/wireless/
@ -18093,7 +18097,6 @@ F: drivers/net/ethernet/qualcomm/emac/
QUALCOMM ETHQOS ETHERNET DRIVER
M: Vinod Koul <vkoul@kernel.org>
R: Bhupesh Sharma <bhupesh.sharma@linaro.org>
L: netdev@vger.kernel.org
L: linux-arm-msm@vger.kernel.org
S: Maintained
@ -20561,6 +20564,7 @@ F: Documentation/translations/sp_SP/
SPARC + UltraSPARC (sparc/sparc64)
M: "David S. Miller" <davem@davemloft.net>
M: Andreas Larsson <andreas@gaisler.com>
L: sparclinux@vger.kernel.org
S: Maintained
Q: http://patchwork.ozlabs.org/project/sparclinux/list/
@ -24351,13 +24355,6 @@ T: git git://git.kernel.org/pub/scm/linux/kernel/git/dlemoal/zonefs.git
F: Documentation/filesystems/zonefs.rst
F: fs/zonefs/
ZPOOL COMPRESSED PAGE STORAGE API
M: Dan Streetman <ddstreet@ieee.org>
L: linux-mm@kvack.org
S: Maintained
F: include/linux/zpool.h
F: mm/zpool.c
ZR36067 VIDEO FOR LINUX DRIVER
M: Corentin Labbe <clabbe@baylibre.com>
L: mjpeg-users@lists.sourceforge.net
@ -24409,7 +24406,9 @@ M: Nhat Pham <nphamcs@gmail.com>
L: linux-mm@kvack.org
S: Maintained
F: Documentation/admin-guide/mm/zswap.rst
F: include/linux/zpool.h
F: include/linux/zswap.h
F: mm/zpool.c
F: mm/zswap.c
THE REST

View File

@ -2,7 +2,7 @@
VERSION = 6
PATCHLEVEL = 8
SUBLEVEL = 0
EXTRAVERSION = -rc1
EXTRAVERSION = -rc2
NAME = Hurr durr I'ma ninja sloth
# *DOCUMENTATION*
@ -294,15 +294,15 @@ may-sync-config := 1
single-build :=
ifneq ($(filter $(no-dot-config-targets), $(MAKECMDGOALS)),)
ifeq ($(filter-out $(no-dot-config-targets), $(MAKECMDGOALS)),)
ifeq ($(filter-out $(no-dot-config-targets), $(MAKECMDGOALS)),)
need-config :=
endif
endif
endif
ifneq ($(filter $(no-sync-config-targets), $(MAKECMDGOALS)),)
ifeq ($(filter-out $(no-sync-config-targets), $(MAKECMDGOALS)),)
ifeq ($(filter-out $(no-sync-config-targets), $(MAKECMDGOALS)),)
may-sync-config :=
endif
endif
endif
need-compiler := $(may-sync-config)
@ -323,9 +323,9 @@ endif
# We cannot build single targets and the others at the same time
ifneq ($(filter $(single-targets), $(MAKECMDGOALS)),)
single-build := 1
ifneq ($(filter-out $(single-targets), $(MAKECMDGOALS)),)
ifneq ($(filter-out $(single-targets), $(MAKECMDGOALS)),)
mixed-build := 1
endif
endif
endif
# For "make -j clean all", "make -j mrproper defconfig all", etc.
@ -1666,7 +1666,7 @@ help:
@echo ' (sparse by default)'
@echo ' make C=2 [targets] Force check of all c source with $$CHECK'
@echo ' make RECORDMCOUNT_WARN=1 [targets] Warn about ignored mcount sections'
@echo ' make W=n [targets] Enable extra build checks, n=1,2,3 where'
@echo ' make W=n [targets] Enable extra build checks, n=1,2,3,c,e where'
@echo ' 1: warnings which may be relevant and do not occur too often'
@echo ' 2: warnings which occur quite often but may still be relevant'
@echo ' 3: more obscure warnings, can most likely be ignored'

View File

@ -673,6 +673,7 @@ config SHADOW_CALL_STACK
bool "Shadow Call Stack"
depends on ARCH_SUPPORTS_SHADOW_CALL_STACK
depends on DYNAMIC_FTRACE_WITH_ARGS || DYNAMIC_FTRACE_WITH_REGS || !FUNCTION_GRAPH_TRACER
depends on MMU
help
This option enables the compiler's Shadow Call Stack, which
uses a shadow stack to protect function return addresses from

View File

@ -45,8 +45,8 @@
num-chipselects = <1>;
cs-gpios = <&gpio0 ASPEED_GPIO(Z, 0) GPIO_ACTIVE_LOW>;
tpmdev@0 {
compatible = "tcg,tpm_tis-spi";
tpm@0 {
compatible = "infineon,slb9670", "tcg,tpm_tis-spi";
spi-max-frequency = <33000000>;
reg = <0>;
};

View File

@ -80,8 +80,8 @@
gpio-miso = <&gpio ASPEED_GPIO(R, 5) GPIO_ACTIVE_HIGH>;
num-chipselects = <1>;
tpmdev@0 {
compatible = "tcg,tpm_tis-spi";
tpm@0 {
compatible = "infineon,slb9670", "tcg,tpm_tis-spi";
spi-max-frequency = <33000000>;
reg = <0>;
};

View File

@ -456,7 +456,7 @@
status = "okay";
tpm: tpm@2e {
compatible = "tcg,tpm-tis-i2c";
compatible = "nuvoton,npct75x", "tcg,tpm-tis-i2c";
reg = <0x2e>;
};
};

View File

@ -35,8 +35,8 @@
gpio-mosi = <&gpio0 ASPEED_GPIO(X, 4) GPIO_ACTIVE_HIGH>;
gpio-miso = <&gpio0 ASPEED_GPIO(X, 5) GPIO_ACTIVE_HIGH>;
tpmdev@0 {
compatible = "tcg,tpm_tis-spi";
tpm@0 {
compatible = "infineon,slb9670", "tcg,tpm_tis-spi";
spi-max-frequency = <33000000>;
reg = <0>;
};

View File

@ -116,7 +116,7 @@
tpm_tis: tpm@1 {
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_tpm>;
compatible = "tcg,tpm_tis-spi";
compatible = "infineon,slb9670", "tcg,tpm_tis-spi";
reg = <1>;
spi-max-frequency = <20000000>;
interrupt-parent = <&gpio5>;

View File

@ -130,7 +130,7 @@
* TCG specification - Section 6.4.1 Clocking:
* TPM shall support a SPI clock frequency range of 10-24 MHz.
*/
st33htph: tpm-tis@0 {
st33htph: tpm@0 {
compatible = "st,st33htpm-spi", "tcg,tpm_tis-spi";
reg = <0>;
spi-max-frequency = <24000000>;

View File

@ -434,6 +434,7 @@
};
&fimd {
samsung,invert-vclk;
status = "okay";
};

View File

@ -217,7 +217,7 @@
pinctrl-names = "default";
pinctrl-0 = <&spi1_pins>;
tpm_spi_tis@0 {
tpm@0 {
compatible = "tcg,tpm_tis-spi";
reg = <0>;
spi-max-frequency = <500000>;

View File

@ -289,7 +289,7 @@
#clock-cells = <1>;
clocks = <&cmu_top CLK_DOUT_CMU_MISC_BUS>,
<&cmu_top CLK_DOUT_CMU_MISC_SSS>;
clock-names = "dout_cmu_misc_bus", "dout_cmu_misc_sss";
clock-names = "bus", "sss";
};
watchdog_cl0: watchdog@10060000 {

View File

@ -120,7 +120,7 @@
};
tpm: tpm@1 {
compatible = "tcg,tpm_tis-spi";
compatible = "infineon,slb9670", "tcg,tpm_tis-spi";
interrupts = <11 IRQ_TYPE_LEVEL_LOW>;
interrupt-parent = <&gpio2>;
pinctrl-names = "default";

View File

@ -89,7 +89,7 @@
status = "okay";
tpm@1 {
compatible = "tcg,tpm_tis-spi";
compatible = "atmel,attpm20p", "tcg,tpm_tis-spi";
reg = <0x1>;
spi-max-frequency = <36000000>;
};

View File

@ -109,7 +109,7 @@
status = "okay";
tpm@1 {
compatible = "tcg,tpm_tis-spi";
compatible = "atmel,attpm20p", "tcg,tpm_tis-spi";
reg = <0x1>;
spi-max-frequency = <36000000>;
};

View File

@ -234,7 +234,7 @@
status = "okay";
tpm: tpm@0 {
compatible = "infineon,slb9670";
compatible = "infineon,slb9670", "tcg,tpm_tis-spi";
reg = <0>;
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_tpm>;

View File

@ -103,7 +103,7 @@
status = "okay";
tpm@1 {
compatible = "tcg,tpm_tis-spi";
compatible = "atmel,attpm20p", "tcg,tpm_tis-spi";
reg = <0x1>;
spi-max-frequency = <36000000>;
};

View File

@ -115,7 +115,7 @@
status = "okay";
tpm@1 {
compatible = "tcg,tpm_tis-spi";
compatible = "atmel,attpm20p", "tcg,tpm_tis-spi";
reg = <0x1>;
spi-max-frequency = <36000000>;
};

View File

@ -196,7 +196,7 @@
status = "okay";
tpm@0 {
compatible = "tcg,tpm_tis-spi";
compatible = "atmel,attpm20p", "tcg,tpm_tis-spi";
reg = <0x0>;
spi-max-frequency = <36000000>;
};

View File

@ -65,7 +65,7 @@
status = "okay";
tpm@0 {
compatible = "infineon,slb9670";
compatible = "infineon,slb9670", "tcg,tpm_tis-spi";
reg = <0>;
spi-max-frequency = <43000000>;
};

View File

@ -888,7 +888,7 @@
status = "okay";
cs-gpios = <&pio 86 GPIO_ACTIVE_LOW>;
cr50@0 {
tpm@0 {
compatible = "google,cr50";
reg = <0>;
spi-max-frequency = <1000000>;

View File

@ -1402,7 +1402,7 @@
pinctrl-names = "default";
pinctrl-0 = <&spi5_pins>;
cr50@0 {
tpm@0 {
compatible = "google,cr50";
reg = <0>;
interrupts-extended = <&pio 171 IRQ_TYPE_EDGE_RISING>;

View File

@ -70,7 +70,7 @@
&spi0 {
status = "okay";
cr50@0 {
tpm@0 {
compatible = "google,cr50";
reg = <0>;
interrupt-parent = <&gpio0>;

View File

@ -706,7 +706,7 @@ camera: &i2c7 {
&spi2 {
status = "okay";
cr50@0 {
tpm@0 {
compatible = "google,cr50";
reg = <0>;
interrupt-parent = <&gpio1>;

View File

@ -60,7 +60,7 @@ int kvm_own_lsx(struct kvm_vcpu *vcpu);
void kvm_save_lsx(struct loongarch_fpu *fpu);
void kvm_restore_lsx(struct loongarch_fpu *fpu);
#else
static inline int kvm_own_lsx(struct kvm_vcpu *vcpu) { }
static inline int kvm_own_lsx(struct kvm_vcpu *vcpu) { return -EINVAL; }
static inline void kvm_save_lsx(struct loongarch_fpu *fpu) { }
static inline void kvm_restore_lsx(struct loongarch_fpu *fpu) { }
#endif
@ -70,7 +70,7 @@ int kvm_own_lasx(struct kvm_vcpu *vcpu);
void kvm_save_lasx(struct loongarch_fpu *fpu);
void kvm_restore_lasx(struct loongarch_fpu *fpu);
#else
static inline int kvm_own_lasx(struct kvm_vcpu *vcpu) { }
static inline int kvm_own_lasx(struct kvm_vcpu *vcpu) { return -EINVAL; }
static inline void kvm_save_lasx(struct loongarch_fpu *fpu) { }
static inline void kvm_restore_lasx(struct loongarch_fpu *fpu) { }
#endif

View File

@ -509,7 +509,6 @@ asmlinkage void start_secondary(void)
sync_counter();
cpu = raw_smp_processor_id();
set_my_cpu_offset(per_cpu_offset(cpu));
rcutree_report_cpu_starting(cpu);
cpu_probe();
constant_clockevent_init();

View File

@ -675,7 +675,7 @@ static bool fault_supports_huge_mapping(struct kvm_memory_slot *memslot,
*
* There are several ways to safely use this helper:
*
* - Check mmu_invalidate_retry_hva() after grabbing the mapping level, before
* - Check mmu_invalidate_retry_gfn() after grabbing the mapping level, before
* consuming it. In this case, mmu_lock doesn't need to be held during the
* lookup, but it does need to be held while checking the MMU notifier.
*
@ -855,7 +855,7 @@ retry:
/* Check if an invalidation has taken place since we got pfn */
spin_lock(&kvm->mmu_lock);
if (mmu_invalidate_retry_hva(kvm, mmu_seq, hva)) {
if (mmu_invalidate_retry_gfn(kvm, mmu_seq, gfn)) {
/*
* This can happen when mappings are changed asynchronously, but
* also synchronously if a COW is triggered by

View File

@ -284,12 +284,16 @@ static void setup_tlb_handler(int cpu)
set_handler(EXCCODE_TLBNR * VECSIZE, handle_tlb_protect, VECSIZE);
set_handler(EXCCODE_TLBNX * VECSIZE, handle_tlb_protect, VECSIZE);
set_handler(EXCCODE_TLBPE * VECSIZE, handle_tlb_protect, VECSIZE);
}
} else {
int vec_sz __maybe_unused;
void *addr __maybe_unused;
struct page *page __maybe_unused;
/* Avoid lockdep warning */
rcutree_report_cpu_starting(cpu);
#ifdef CONFIG_NUMA
else {
void *addr;
struct page *page;
const int vec_sz = sizeof(exception_handlers);
vec_sz = sizeof(exception_handlers);
if (pcpu_handlers[cpu])
return;
@ -305,8 +309,8 @@ static void setup_tlb_handler(int cpu)
csr_write64(pcpu_handlers[cpu], LOONGARCH_CSR_EENTRY);
csr_write64(pcpu_handlers[cpu], LOONGARCH_CSR_MERRENTRY);
csr_write64(pcpu_handlers[cpu] + 80*VECSIZE, LOONGARCH_CSR_TLBRENTRY);
}
#endif
}
}
void tlb_init(int cpu)

View File

@ -15,10 +15,10 @@
KBUILD_DEFCONFIG := multi_defconfig
ifdef cross_compiling
ifeq ($(CROSS_COMPILE),)
ifeq ($(CROSS_COMPILE),)
CROSS_COMPILE := $(call cc-cross-prefix, \
m68k-linux-gnu- m68k-linux- m68k-unknown-linux-gnu-)
endif
endif
endif
#

View File

@ -40,6 +40,7 @@
#include <linux/string.h>
#include <asm/bootinfo.h>
#include <prom.h>
int prom_argc;
char **prom_argv;

View File

@ -30,13 +30,11 @@
#include <linux/mm.h>
#include <linux/dma-map-ops.h> /* for dma_default_coherent */
#include <asm/bootinfo.h>
#include <asm/mipsregs.h>
#include <au1000.h>
extern void __init board_setup(void);
extern void __init alchemy_set_lpj(void);
static bool alchemy_dma_coherent(void)
{
switch (alchemy_get_cputype()) {

View File

@ -702,7 +702,7 @@ static struct ssb_sprom bcm63xx_sprom = {
.boardflags_hi = 0x0000,
};
int bcm63xx_get_fallback_sprom(struct ssb_bus *bus, struct ssb_sprom *out)
static int bcm63xx_get_fallback_sprom(struct ssb_bus *bus, struct ssb_sprom *out)
{
if (bus->bustype == SSB_BUSTYPE_PCI) {
memcpy(out, &bcm63xx_sprom, sizeof(struct ssb_sprom));

View File

@ -26,7 +26,7 @@ static struct platform_device bcm63xx_rng_device = {
.resource = rng_resources,
};
int __init bcm63xx_rng_register(void)
static int __init bcm63xx_rng_register(void)
{
if (!BCMCPU_IS_6368())
return -ENODEV;

View File

@ -10,6 +10,7 @@
#include <linux/kernel.h>
#include <linux/platform_device.h>
#include <bcm63xx_cpu.h>
#include <bcm63xx_dev_uart.h>
static struct resource uart0_resources[] = {
{

View File

@ -34,7 +34,7 @@ static struct platform_device bcm63xx_wdt_device = {
},
};
int __init bcm63xx_wdt_register(void)
static int __init bcm63xx_wdt_register(void)
{
wdt_resources[0].start = bcm63xx_regset_address(RSET_WDT);
wdt_resources[0].end = wdt_resources[0].start;

View File

@ -72,7 +72,7 @@ static inline int enable_irq_for_cpu(int cpu, struct irq_data *d,
*/
#define BUILD_IPIC_INTERNAL(width) \
void __dispatch_internal_##width(int cpu) \
static void __dispatch_internal_##width(int cpu) \
{ \
u32 pending[width / 32]; \
unsigned int src, tgt; \

View File

@ -159,7 +159,7 @@ void __init plat_mem_setup(void)
board_setup();
}
int __init bcm63xx_register_devices(void)
static int __init bcm63xx_register_devices(void)
{
/* register gpiochip */
bcm63xx_gpio_init();

View File

@ -178,7 +178,7 @@ int bcm63xx_timer_set(int id, int monotonic, unsigned int countdown_us)
EXPORT_SYMBOL(bcm63xx_timer_set);
int bcm63xx_timer_init(void)
static int bcm63xx_timer_init(void)
{
int ret, irq;
u32 reg;

View File

@ -23,9 +23,6 @@
#include <cobalt.h>
extern void cobalt_machine_restart(char *command);
extern void cobalt_machine_halt(void);
const char *get_system_type(void)
{
switch (cobalt_board_id) {

View File

@ -37,7 +37,7 @@ static unsigned int nr_prom_mem __initdata;
*/
#define ARC_PAGE_SHIFT 12
struct linux_mdesc * __init ArcGetMemoryDescriptor(struct linux_mdesc *Current)
static struct linux_mdesc * __init ArcGetMemoryDescriptor(struct linux_mdesc *Current)
{
return (struct linux_mdesc *) ARC_CALL1(get_mdesc, Current);
}

View File

@ -597,6 +597,9 @@
#include <asm/cpu.h>
void alchemy_set_lpj(void);
void board_setup(void);
/* helpers to access the SYS_* registers */
static inline unsigned long alchemy_rdsys(int regofs)
{

View File

@ -19,4 +19,7 @@ extern int cobalt_board_id;
#define COBALT_BRD_ID_QUBE2 0x5
#define COBALT_BRD_ID_RAQ2 0x6
void cobalt_machine_halt(void);
void cobalt_machine_restart(char *command);
#endif /* __ASM_COBALT_H */

View File

@ -11,6 +11,7 @@
#include <asm/cpu-features.h>
#include <asm/cpu-info.h>
#include <asm/fpu.h>
#ifdef CONFIG_MIPS_FP_SUPPORT
@ -309,6 +310,11 @@ void mips_set_personality_nan(struct arch_elf_state *state)
struct cpuinfo_mips *c = &boot_cpu_data;
struct task_struct *t = current;
/* Do this early so t->thread.fpu.fcr31 won't be clobbered in case
* we are preempted before the lose_fpu(0) in start_thread.
*/
lose_fpu(0);
t->thread.fpu.fcr31 = c->fpu_csr31;
switch (state->nan_2008) {
case 0:

View File

@ -2007,7 +2007,13 @@ unsigned long vi_handlers[64];
void reserve_exception_space(phys_addr_t addr, unsigned long size)
{
memblock_reserve(addr, size);
/*
* reserve exception space on CPUs other than CPU0
* is too late, since memblock is unavailable when APs
* up
*/
if (smp_processor_id() == 0)
memblock_reserve(addr, size);
}
void __init *set_except_vector(int n, void *addr)

View File

@ -108,10 +108,9 @@ void __init prom_init(void)
prom_init_cmdline();
#if defined(CONFIG_MIPS_MT_SMP)
if (cpu_has_mipsmt) {
lantiq_smp_ops = vsmp_smp_ops;
lantiq_smp_ops = vsmp_smp_ops;
if (cpu_has_mipsmt)
lantiq_smp_ops.init_secondary = lantiq_init_secondary;
register_smp_ops(&lantiq_smp_ops);
}
register_smp_ops(&lantiq_smp_ops);
#endif
}

View File

@ -103,6 +103,9 @@ void __init szmem(unsigned int node)
if (loongson_sysconf.vgabios_addr)
memblock_reserve(virt_to_phys((void *)loongson_sysconf.vgabios_addr),
SZ_256K);
/* set nid for reserved memory */
memblock_set_node((u64)node << 44, (u64)(node + 1) << 44,
&memblock.reserved, node);
}
#ifndef CONFIG_NUMA

View File

@ -132,6 +132,8 @@ static void __init node_mem_init(unsigned int node)
/* Reserve pfn range 0~node[0]->node_start_pfn */
memblock_reserve(0, PAGE_SIZE * start_pfn);
/* set nid for reserved memory on node 0 */
memblock_set_node(0, 1ULL << 44, &memblock.reserved, 0);
}
}

View File

@ -5,7 +5,7 @@
obj-y := ip27-berr.o ip27-irq.o ip27-init.o ip27-klconfig.o \
ip27-klnuma.o ip27-memory.o ip27-nmi.o ip27-reset.o ip27-timer.o \
ip27-hubio.o ip27-xtalk.o
ip27-xtalk.o
obj-$(CONFIG_EARLY_PRINTK) += ip27-console.o
obj-$(CONFIG_SMP) += ip27-smp.o

View File

@ -22,6 +22,8 @@
#include <asm/traps.h>
#include <linux/uaccess.h>
#include "ip27-common.h"
static void dump_hub_information(unsigned long errst0, unsigned long errst1)
{
static char *err_type[2][8] = {
@ -57,7 +59,7 @@ static void dump_hub_information(unsigned long errst0, unsigned long errst1)
[st0.pi_stat0_fmt.s0_err_type] ? : "invalid");
}
int ip27_be_handler(struct pt_regs *regs, int is_fixup)
static int ip27_be_handler(struct pt_regs *regs, int is_fixup)
{
unsigned long errst0, errst1;
int data = regs->cp0_cause & 4;

View File

@ -10,6 +10,7 @@ extern void hub_rt_clock_event_init(void);
extern void hub_rtc_init(nasid_t nasid);
extern void install_cpu_nmi_handler(int slice);
extern void install_ipi(void);
extern void ip27_be_init(void);
extern void ip27_reboot_setup(void);
extern const struct plat_smp_ops ip27_smp_ops;
extern unsigned long node_getfirstfree(nasid_t nasid);
@ -17,4 +18,5 @@ extern void per_cpu_init(void);
extern void replicate_kernel_text(void);
extern void setup_replication_mask(void);
#endif /* __IP27_COMMON_H */

View File

@ -1,185 +0,0 @@
// SPDX-License-Identifier: GPL-2.0-only
/*
* Copyright (C) 1992-1997, 2000-2003 Silicon Graphics, Inc.
* Copyright (C) 2004 Christoph Hellwig.
*
* Support functions for the HUB ASIC - mostly PIO mapping related.
*/
#include <linux/bitops.h>
#include <linux/string.h>
#include <linux/mmzone.h>
#include <asm/sn/addrs.h>
#include <asm/sn/arch.h>
#include <asm/sn/agent.h>
#include <asm/sn/io.h>
#include <asm/xtalk/xtalk.h>
static int force_fire_and_forget = 1;
/**
* hub_pio_map - establish a HUB PIO mapping
*
* @nasid: nasid to perform PIO mapping on
* @widget: widget ID to perform PIO mapping for
* @xtalk_addr: xtalk_address that needs to be mapped
* @size: size of the PIO mapping
*
**/
unsigned long hub_pio_map(nasid_t nasid, xwidgetnum_t widget,
unsigned long xtalk_addr, size_t size)
{
unsigned i;
/* use small-window mapping if possible */
if ((xtalk_addr % SWIN_SIZE) + size <= SWIN_SIZE)
return NODE_SWIN_BASE(nasid, widget) + (xtalk_addr % SWIN_SIZE);
if ((xtalk_addr % BWIN_SIZE) + size > BWIN_SIZE) {
printk(KERN_WARNING "PIO mapping at hub %d widget %d addr 0x%lx"
" too big (%ld)\n",
nasid, widget, xtalk_addr, size);
return 0;
}
xtalk_addr &= ~(BWIN_SIZE-1);
for (i = 0; i < HUB_NUM_BIG_WINDOW; i++) {
if (test_and_set_bit(i, hub_data(nasid)->h_bigwin_used))
continue;
/*
* The code below does a PIO write to setup an ITTE entry.
*
* We need to prevent other CPUs from seeing our updated
* memory shadow of the ITTE (in the piomap) until the ITTE
* entry is actually set up; otherwise, another CPU might
* attempt a PIO prematurely.
*
* Also, the only way we can know that an entry has been
* received by the hub and can be used by future PIO reads/
* writes is by reading back the ITTE entry after writing it.
*
* For these two reasons, we PIO read back the ITTE entry
* after we write it.
*/
IIO_ITTE_PUT(nasid, i, HUB_PIO_MAP_TO_MEM, widget, xtalk_addr);
__raw_readq(IIO_ITTE_GET(nasid, i));
return NODE_BWIN_BASE(nasid, widget) + (xtalk_addr % BWIN_SIZE);
}
printk(KERN_WARNING "unable to establish PIO mapping for at"
" hub %d widget %d addr 0x%lx\n",
nasid, widget, xtalk_addr);
return 0;
}
/*
* hub_setup_prb(nasid, prbnum, credits, conveyor)
*
* Put a PRB into fire-and-forget mode if conveyor isn't set. Otherwise,
* put it into conveyor belt mode with the specified number of credits.
*/
static void hub_setup_prb(nasid_t nasid, int prbnum, int credits)
{
union iprb_u prb;
int prb_offset;
/*
* Get the current register value.
*/
prb_offset = IIO_IOPRB(prbnum);
prb.iprb_regval = REMOTE_HUB_L(nasid, prb_offset);
/*
* Clear out some fields.
*/
prb.iprb_ovflow = 1;
prb.iprb_bnakctr = 0;
prb.iprb_anakctr = 0;
/*
* Enable or disable fire-and-forget mode.
*/
prb.iprb_ff = force_fire_and_forget ? 1 : 0;
/*
* Set the appropriate number of PIO credits for the widget.
*/
prb.iprb_xtalkctr = credits;
/*
* Store the new value to the register.
*/
REMOTE_HUB_S(nasid, prb_offset, prb.iprb_regval);
}
/**
* hub_set_piomode - set pio mode for a given hub
*
* @nasid: physical node ID for the hub in question
*
* Put the hub into either "PIO conveyor belt" mode or "fire-and-forget" mode.
* To do this, we have to make absolutely sure that no PIOs are in progress
* so we turn off access to all widgets for the duration of the function.
*
* XXX - This code should really check what kind of widget we're talking
* to. Bridges can only handle three requests, but XG will do more.
* How many can crossbow handle to widget 0? We're assuming 1.
*
* XXX - There is a bug in the crossbow that link reset PIOs do not
* return write responses. The easiest solution to this problem is to
* leave widget 0 (xbow) in fire-and-forget mode at all times. This
* only affects pio's to xbow registers, which should be rare.
**/
static void hub_set_piomode(nasid_t nasid)
{
u64 ii_iowa;
union hubii_wcr_u ii_wcr;
unsigned i;
ii_iowa = REMOTE_HUB_L(nasid, IIO_OUTWIDGET_ACCESS);
REMOTE_HUB_S(nasid, IIO_OUTWIDGET_ACCESS, 0);
ii_wcr.wcr_reg_value = REMOTE_HUB_L(nasid, IIO_WCR);
if (ii_wcr.iwcr_dir_con) {
/*
* Assume a bridge here.
*/
hub_setup_prb(nasid, 0, 3);
} else {
/*
* Assume a crossbow here.
*/
hub_setup_prb(nasid, 0, 1);
}
/*
* XXX - Here's where we should take the widget type into
* when account assigning credits.
*/
for (i = HUB_WIDGET_ID_MIN; i <= HUB_WIDGET_ID_MAX; i++)
hub_setup_prb(nasid, i, 3);
REMOTE_HUB_S(nasid, IIO_OUTWIDGET_ACCESS, ii_iowa);
}
/*
* hub_pio_init - PIO-related hub initialization
*
* @hub: hubinfo structure for our hub
*/
void hub_pio_init(nasid_t nasid)
{
unsigned i;
/* initialize big window piomaps for this hub */
bitmap_zero(hub_data(nasid)->h_bigwin_used, HUB_NUM_BIG_WINDOW);
for (i = 0; i < HUB_NUM_BIG_WINDOW; i++)
IIO_ITTE_DISABLE(nasid, i);
hub_set_piomode(nasid);
}

View File

@ -23,6 +23,8 @@
#include <asm/sn/intr.h>
#include <asm/sn/irq_alloc.h>
#include "ip27-common.h"
struct hub_irq_data {
u64 *irq_mask[2];
cpuid_t cpu;

View File

@ -23,6 +23,7 @@
#include <asm/page.h>
#include <asm/pgalloc.h>
#include <asm/sections.h>
#include <asm/sgialib.h>
#include <asm/sn/arch.h>
#include <asm/sn/agent.h>

View File

@ -11,6 +11,8 @@
#include <asm/sn/arch.h>
#include <asm/sn/agent.h>
#include "ip27-common.h"
#if 0
#define NODE_NUM_CPUS(n) CNODE_NUM_CPUS(n)
#else
@ -23,16 +25,7 @@
typedef unsigned long machreg_t;
static arch_spinlock_t nmi_lock = __ARCH_SPIN_LOCK_UNLOCKED;
/*
* Let's see what else we need to do here. Set up sp, gp?
*/
void nmi_dump(void)
{
void cont_nmi_dump(void);
cont_nmi_dump();
}
static void nmi_dump(void);
void install_cpu_nmi_handler(int slice)
{
@ -53,7 +46,7 @@ void install_cpu_nmi_handler(int slice)
* into the eframe format for the node under consideration.
*/
void nmi_cpu_eframe_save(nasid_t nasid, int slice)
static void nmi_cpu_eframe_save(nasid_t nasid, int slice)
{
struct reg_struct *nr;
int i;
@ -129,7 +122,7 @@ void nmi_cpu_eframe_save(nasid_t nasid, int slice)
pr_emerg("\n");
}
void nmi_dump_hub_irq(nasid_t nasid, int slice)
static void nmi_dump_hub_irq(nasid_t nasid, int slice)
{
u64 mask0, mask1, pend0, pend1;
@ -153,7 +146,7 @@ void nmi_dump_hub_irq(nasid_t nasid, int slice)
* Copy the cpu registers which have been saved in the IP27prom format
* into the eframe format for the node under consideration.
*/
void nmi_node_eframe_save(nasid_t nasid)
static void nmi_node_eframe_save(nasid_t nasid)
{
int slice;
@ -170,8 +163,7 @@ void nmi_node_eframe_save(nasid_t nasid)
/*
* Save the nmi cpu registers for all cpus in the system.
*/
void
nmi_eframes_save(void)
static void nmi_eframes_save(void)
{
nasid_t nasid;
@ -179,8 +171,7 @@ nmi_eframes_save(void)
nmi_node_eframe_save(nasid);
}
void
cont_nmi_dump(void)
static void nmi_dump(void)
{
#ifndef REAL_NMI_SIGNAL
static atomic_t nmied_cpus = ATOMIC_INIT(0);

View File

@ -3,6 +3,7 @@
#include <linux/io.h>
#include <asm/sn/ioc3.h>
#include <asm/setup.h>
static inline struct ioc3_uartregs *console_uart(void)
{

View File

@ -14,6 +14,7 @@
#include <linux/percpu.h>
#include <linux/memblock.h>
#include <asm/bootinfo.h>
#include <asm/smp-ops.h>
#include <asm/sgialib.h>
#include <asm/time.h>

View File

@ -18,6 +18,8 @@
#include <asm/ip32/crime.h>
#include <asm/ip32/mace.h>
#include "ip32-common.h"
struct sgi_crime __iomem *crime;
struct sgi_mace __iomem *mace;
@ -39,7 +41,7 @@ void __init crime_init(void)
id, rev, field, (unsigned long) CRIME_BASE);
}
irqreturn_t crime_memerr_intr(unsigned int irq, void *dev_id)
irqreturn_t crime_memerr_intr(int irq, void *dev_id)
{
unsigned long stat, addr;
int fatal = 0;
@ -90,7 +92,7 @@ irqreturn_t crime_memerr_intr(unsigned int irq, void *dev_id)
return IRQ_HANDLED;
}
irqreturn_t crime_cpuerr_intr(unsigned int irq, void *dev_id)
irqreturn_t crime_cpuerr_intr(int irq, void *dev_id)
{
unsigned long stat = crime->cpu_error_stat & CRIME_CPU_ERROR_MASK;
unsigned long addr = crime->cpu_error_addr & CRIME_CPU_ERROR_ADDR_MASK;

View File

@ -18,6 +18,8 @@
#include <asm/ptrace.h>
#include <asm/tlbdebug.h>
#include "ip32-common.h"
static int ip32_be_handler(struct pt_regs *regs, int is_fixup)
{
int data = regs->cp0_cause & 4;

View File

@ -0,0 +1,15 @@
/* SPDX-License-Identifier: GPL-2.0-only */
#ifndef __IP32_COMMON_H
#define __IP32_COMMON_H
#include <linux/init.h>
#include <linux/interrupt.h>
void __init crime_init(void);
irqreturn_t crime_memerr_intr(int irq, void *dev_id);
irqreturn_t crime_cpuerr_intr(int irq, void *dev_id);
void __init ip32_be_init(void);
void ip32_prepare_poweroff(void);
#endif /* __IP32_COMMON_H */

View File

@ -28,6 +28,8 @@
#include <asm/ip32/mace.h>
#include <asm/ip32/ip32_ints.h>
#include "ip32-common.h"
/* issue a PIO read to make sure no PIO writes are pending */
static inline void flush_crime_bus(void)
{
@ -107,10 +109,6 @@ static inline void flush_mace_bus(void)
* is quite different anyway.
*/
/* Some initial interrupts to set up */
extern irqreturn_t crime_memerr_intr(int irq, void *dev_id);
extern irqreturn_t crime_cpuerr_intr(int irq, void *dev_id);
/*
* This is for pure CRIME interrupts - ie not MACE. The advantage?
* We get to split the register in half and do faster lookups.

View File

@ -15,6 +15,7 @@
#include <asm/ip32/crime.h>
#include <asm/bootinfo.h>
#include <asm/page.h>
#include <asm/sgialib.h>
extern void crime_init(void);

View File

@ -29,6 +29,8 @@
#include <asm/ip32/crime.h>
#include <asm/ip32/ip32_ints.h>
#include "ip32-common.h"
#define POWERDOWN_TIMEOUT 120
/*
* Blink frequency during reboot grace period and when panicked.

View File

@ -26,8 +26,7 @@
#include <asm/ip32/mace.h>
#include <asm/ip32/ip32_ints.h>
extern void ip32_be_init(void);
extern void crime_init(void);
#include "ip32-common.h"
#ifdef CONFIG_SGI_O2MACE_ETH
/*

View File

@ -25,7 +25,6 @@ config PARISC
select RTC_DRV_GENERIC
select INIT_ALL_POSSIBLE
select BUG
select BUILDTIME_TABLE_SORT
select HAVE_KERNEL_UNCOMPRESSED
select HAVE_PCI
select HAVE_PERF_EVENTS

View File

@ -50,12 +50,12 @@ export CROSS32CC
# Set default cross compiler for kernel build
ifdef cross_compiling
ifeq ($(CROSS_COMPILE),)
ifeq ($(CROSS_COMPILE),)
CC_SUFFIXES = linux linux-gnu unknown-linux-gnu suse-linux
CROSS_COMPILE := $(call cc-cross-prefix, \
$(foreach a,$(CC_ARCHES), \
$(foreach s,$(CC_SUFFIXES),$(a)-$(s)-)))
endif
endif
endif
ifdef CONFIG_DYNAMIC_FTRACE

View File

@ -576,6 +576,7 @@
.section __ex_table,"aw" ! \
.align 4 ! \
.word (fault_addr - .), (except_addr - .) ! \
or %r0,%r0,%r0 ! \
.previous

View File

@ -0,0 +1,64 @@
/* SPDX-License-Identifier: GPL-2.0 */
#ifndef __PARISC_EXTABLE_H
#define __PARISC_EXTABLE_H
#include <asm/ptrace.h>
#include <linux/compiler.h>
/*
* The exception table consists of three addresses:
*
* - A relative address to the instruction that is allowed to fault.
* - A relative address at which the program should continue (fixup routine)
* - An asm statement which specifies which CPU register will
* receive -EFAULT when an exception happens if the lowest bit in
* the fixup address is set.
*
* Note: The register specified in the err_opcode instruction will be
* modified at runtime if a fault happens. Register %r0 will be ignored.
*
* Since relative addresses are used, 32bit values are sufficient even on
* 64bit kernel.
*/
struct pt_regs;
int fixup_exception(struct pt_regs *regs);
#define ARCH_HAS_RELATIVE_EXTABLE
struct exception_table_entry {
int insn; /* relative address of insn that is allowed to fault. */
int fixup; /* relative address of fixup routine */
int err_opcode; /* sample opcode with register which holds error code */
};
#define ASM_EXCEPTIONTABLE_ENTRY( fault_addr, except_addr, opcode )\
".section __ex_table,\"aw\"\n" \
".align 4\n" \
".word (" #fault_addr " - .), (" #except_addr " - .)\n" \
opcode "\n" \
".previous\n"
/*
* ASM_EXCEPTIONTABLE_ENTRY_EFAULT() creates a special exception table entry
* (with lowest bit set) for which the fault handler in fixup_exception() will
* load -EFAULT on fault into the register specified by the err_opcode instruction,
* and zeroes the target register in case of a read fault in get_user().
*/
#define ASM_EXCEPTIONTABLE_VAR(__err_var) \
int __err_var = 0
#define ASM_EXCEPTIONTABLE_ENTRY_EFAULT( fault_addr, except_addr, register )\
ASM_EXCEPTIONTABLE_ENTRY( fault_addr, except_addr + 1, "or %%r0,%%r0," register)
static inline void swap_ex_entry_fixup(struct exception_table_entry *a,
struct exception_table_entry *b,
struct exception_table_entry tmp,
int delta)
{
a->fixup = b->fixup + delta;
b->fixup = tmp.fixup - delta;
a->err_opcode = b->err_opcode;
b->err_opcode = tmp.err_opcode;
}
#define swap_ex_entry_fixup swap_ex_entry_fixup
#endif

View File

@ -8,7 +8,8 @@
"copy %%r0,%0\n" \
"8:\tlpa %%r0(%1),%0\n" \
"9:\n" \
ASM_EXCEPTIONTABLE_ENTRY(8b, 9b) \
ASM_EXCEPTIONTABLE_ENTRY(8b, 9b, \
"or %%r0,%%r0,%%r0") \
: "=&r" (pa) \
: "r" (va) \
: "memory" \
@ -22,7 +23,8 @@
"copy %%r0,%0\n" \
"8:\tlpa %%r0(%%sr3,%1),%0\n" \
"9:\n" \
ASM_EXCEPTIONTABLE_ENTRY(8b, 9b) \
ASM_EXCEPTIONTABLE_ENTRY(8b, 9b, \
"or %%r0,%%r0,%%r0") \
: "=&r" (pa) \
: "r" (va) \
: "memory" \

View File

@ -7,6 +7,7 @@
*/
#include <asm/page.h>
#include <asm/cache.h>
#include <asm/extable.h>
#include <linux/bug.h>
#include <linux/string.h>
@ -26,37 +27,6 @@
#define STD_USER(sr, x, ptr) __put_user_asm(sr, "std", x, ptr)
#endif
/*
* The exception table contains two values: the first is the relative offset to
* the address of the instruction that is allowed to fault, and the second is
* the relative offset to the address of the fixup routine. Since relative
* addresses are used, 32bit values are sufficient even on 64bit kernel.
*/
#define ARCH_HAS_RELATIVE_EXTABLE
struct exception_table_entry {
int insn; /* relative address of insn that is allowed to fault. */
int fixup; /* relative address of fixup routine */
};
#define ASM_EXCEPTIONTABLE_ENTRY( fault_addr, except_addr )\
".section __ex_table,\"aw\"\n" \
".align 4\n" \
".word (" #fault_addr " - .), (" #except_addr " - .)\n\t" \
".previous\n"
/*
* ASM_EXCEPTIONTABLE_ENTRY_EFAULT() creates a special exception table entry
* (with lowest bit set) for which the fault handler in fixup_exception() will
* load -EFAULT into %r29 for a read or write fault, and zeroes the target
* register in case of a read fault in get_user().
*/
#define ASM_EXCEPTIONTABLE_REG 29
#define ASM_EXCEPTIONTABLE_VAR(__variable) \
register long __variable __asm__ ("r29") = 0
#define ASM_EXCEPTIONTABLE_ENTRY_EFAULT( fault_addr, except_addr )\
ASM_EXCEPTIONTABLE_ENTRY( fault_addr, except_addr + 1)
#define __get_user_internal(sr, val, ptr) \
({ \
ASM_EXCEPTIONTABLE_VAR(__gu_err); \
@ -83,7 +53,7 @@ struct exception_table_entry {
\
__asm__("1: " ldx " 0(%%sr%2,%3),%0\n" \
"9:\n" \
ASM_EXCEPTIONTABLE_ENTRY_EFAULT(1b, 9b) \
ASM_EXCEPTIONTABLE_ENTRY_EFAULT(1b, 9b, "%1") \
: "=r"(__gu_val), "+r"(__gu_err) \
: "i"(sr), "r"(ptr)); \
\
@ -115,8 +85,8 @@ struct exception_table_entry {
"1: ldw 0(%%sr%2,%3),%0\n" \
"2: ldw 4(%%sr%2,%3),%R0\n" \
"9:\n" \
ASM_EXCEPTIONTABLE_ENTRY_EFAULT(1b, 9b) \
ASM_EXCEPTIONTABLE_ENTRY_EFAULT(2b, 9b) \
ASM_EXCEPTIONTABLE_ENTRY_EFAULT(1b, 9b, "%1") \
ASM_EXCEPTIONTABLE_ENTRY_EFAULT(2b, 9b, "%1") \
: "=&r"(__gu_tmp.l), "+r"(__gu_err) \
: "i"(sr), "r"(ptr)); \
\
@ -174,7 +144,7 @@ struct exception_table_entry {
__asm__ __volatile__ ( \
"1: " stx " %1,0(%%sr%2,%3)\n" \
"9:\n" \
ASM_EXCEPTIONTABLE_ENTRY_EFAULT(1b, 9b) \
ASM_EXCEPTIONTABLE_ENTRY_EFAULT(1b, 9b, "%0") \
: "+r"(__pu_err) \
: "r"(x), "i"(sr), "r"(ptr))
@ -186,15 +156,14 @@ struct exception_table_entry {
"1: stw %1,0(%%sr%2,%3)\n" \
"2: stw %R1,4(%%sr%2,%3)\n" \
"9:\n" \
ASM_EXCEPTIONTABLE_ENTRY_EFAULT(1b, 9b) \
ASM_EXCEPTIONTABLE_ENTRY_EFAULT(2b, 9b) \
ASM_EXCEPTIONTABLE_ENTRY_EFAULT(1b, 9b, "%0") \
ASM_EXCEPTIONTABLE_ENTRY_EFAULT(2b, 9b, "%0") \
: "+r"(__pu_err) \
: "r"(__val), "i"(sr), "r"(ptr)); \
} while (0)
#endif /* !defined(CONFIG_64BIT) */
/*
* Complex access routines -- external declarations
*/
@ -216,7 +185,4 @@ unsigned long __must_check raw_copy_from_user(void *dst, const void __user *src,
#define INLINE_COPY_TO_USER
#define INLINE_COPY_FROM_USER
struct pt_regs;
int fixup_exception(struct pt_regs *regs);
#endif /* __PARISC_UACCESS_H */

View File

@ -58,7 +58,7 @@ int pa_serialize_tlb_flushes __ro_after_init;
struct pdc_cache_info cache_info __ro_after_init;
#ifndef CONFIG_PA20
struct pdc_btlb_info btlb_info __ro_after_init;
struct pdc_btlb_info btlb_info;
#endif
DEFINE_STATIC_KEY_TRUE(parisc_has_cache);
@ -264,6 +264,10 @@ parisc_cache_init(void)
icache_stride = CAFL_STRIDE(cache_info.ic_conf);
#undef CAFL_STRIDE
/* stride needs to be non-zero, otherwise cache flushes will not work */
WARN_ON(cache_info.dc_size && dcache_stride == 0);
WARN_ON(cache_info.ic_size && icache_stride == 0);
if ((boot_cpu_data.pdc.capabilities & PDC_MODEL_NVA_MASK) ==
PDC_MODEL_NVA_UNSUPPORTED) {
printk(KERN_WARNING "parisc_cache_init: Only equivalent aliasing supported!\n");
@ -850,7 +854,7 @@ SYSCALL_DEFINE3(cacheflush, unsigned long, addr, unsigned long, bytes,
#endif
" fic,m %3(%4,%0)\n"
"2: sync\n"
ASM_EXCEPTIONTABLE_ENTRY_EFAULT(1b, 2b)
ASM_EXCEPTIONTABLE_ENTRY_EFAULT(1b, 2b, "%1")
: "+r" (start), "+r" (error)
: "r" (end), "r" (dcache_stride), "i" (SR_USER));
}
@ -865,7 +869,7 @@ SYSCALL_DEFINE3(cacheflush, unsigned long, addr, unsigned long, bytes,
#endif
" fdc,m %3(%4,%0)\n"
"2: sync\n"
ASM_EXCEPTIONTABLE_ENTRY_EFAULT(1b, 2b)
ASM_EXCEPTIONTABLE_ENTRY_EFAULT(1b, 2b, "%1")
: "+r" (start), "+r" (error)
: "r" (end), "r" (icache_stride), "i" (SR_USER));
}

View File

@ -742,7 +742,7 @@ parse_tree_node(struct device *parent, int index, struct hardware_path *modpath)
};
if (device_for_each_child(parent, &recurse_data, descend_children))
{ /* nothing */ };
{ /* nothing */ }
return d.dev;
}
@ -1004,6 +1004,9 @@ static __init int qemu_print_iodc_data(struct device *lin_dev, void *data)
pr_info("\n");
/* Prevent hung task messages when printing on serial console */
cond_resched();
pr_info("#define HPA_%08lx_DESCRIPTION \"%s\"\n",
hpa, parisc_hardware_description(&dev->id));

View File

@ -120,8 +120,8 @@ static int emulate_ldh(struct pt_regs *regs, int toreg)
"2: ldbs 1(%%sr1,%3), %0\n"
" depw %2, 23, 24, %0\n"
"3: \n"
ASM_EXCEPTIONTABLE_ENTRY_EFAULT(1b, 3b)
ASM_EXCEPTIONTABLE_ENTRY_EFAULT(2b, 3b)
ASM_EXCEPTIONTABLE_ENTRY_EFAULT(1b, 3b, "%1")
ASM_EXCEPTIONTABLE_ENTRY_EFAULT(2b, 3b, "%1")
: "+r" (val), "+r" (ret), "=&r" (temp1)
: "r" (saddr), "r" (regs->isr) );
@ -152,8 +152,8 @@ static int emulate_ldw(struct pt_regs *regs, int toreg, int flop)
" mtctl %2,11\n"
" vshd %0,%3,%0\n"
"3: \n"
ASM_EXCEPTIONTABLE_ENTRY_EFAULT(1b, 3b)
ASM_EXCEPTIONTABLE_ENTRY_EFAULT(2b, 3b)
ASM_EXCEPTIONTABLE_ENTRY_EFAULT(1b, 3b, "%1")
ASM_EXCEPTIONTABLE_ENTRY_EFAULT(2b, 3b, "%1")
: "+r" (val), "+r" (ret), "=&r" (temp1), "=&r" (temp2)
: "r" (saddr), "r" (regs->isr) );
@ -189,8 +189,8 @@ static int emulate_ldd(struct pt_regs *regs, int toreg, int flop)
" mtsar %%r19\n"
" shrpd %0,%%r20,%%sar,%0\n"
"3: \n"
ASM_EXCEPTIONTABLE_ENTRY_EFAULT(1b, 3b)
ASM_EXCEPTIONTABLE_ENTRY_EFAULT(2b, 3b)
ASM_EXCEPTIONTABLE_ENTRY_EFAULT(1b, 3b, "%1")
ASM_EXCEPTIONTABLE_ENTRY_EFAULT(2b, 3b, "%1")
: "=r" (val), "+r" (ret)
: "0" (val), "r" (saddr), "r" (regs->isr)
: "r19", "r20" );
@ -209,9 +209,9 @@ static int emulate_ldd(struct pt_regs *regs, int toreg, int flop)
" vshd %0,%R0,%0\n"
" vshd %R0,%4,%R0\n"
"4: \n"
ASM_EXCEPTIONTABLE_ENTRY_EFAULT(1b, 4b)
ASM_EXCEPTIONTABLE_ENTRY_EFAULT(2b, 4b)
ASM_EXCEPTIONTABLE_ENTRY_EFAULT(3b, 4b)
ASM_EXCEPTIONTABLE_ENTRY_EFAULT(1b, 4b, "%1")
ASM_EXCEPTIONTABLE_ENTRY_EFAULT(2b, 4b, "%1")
ASM_EXCEPTIONTABLE_ENTRY_EFAULT(3b, 4b, "%1")
: "+r" (val), "+r" (ret), "+r" (saddr), "=&r" (shift), "=&r" (temp1)
: "r" (regs->isr) );
}
@ -244,8 +244,8 @@ static int emulate_sth(struct pt_regs *regs, int frreg)
"1: stb %1, 0(%%sr1, %3)\n"
"2: stb %2, 1(%%sr1, %3)\n"
"3: \n"
ASM_EXCEPTIONTABLE_ENTRY_EFAULT(1b, 3b)
ASM_EXCEPTIONTABLE_ENTRY_EFAULT(2b, 3b)
ASM_EXCEPTIONTABLE_ENTRY_EFAULT(1b, 3b, "%0")
ASM_EXCEPTIONTABLE_ENTRY_EFAULT(2b, 3b, "%0")
: "+r" (ret), "=&r" (temp1)
: "r" (val), "r" (regs->ior), "r" (regs->isr) );
@ -285,8 +285,8 @@ static int emulate_stw(struct pt_regs *regs, int frreg, int flop)
" stw %%r20,0(%%sr1,%2)\n"
" stw %%r21,4(%%sr1,%2)\n"
"3: \n"
ASM_EXCEPTIONTABLE_ENTRY_EFAULT(1b, 3b)
ASM_EXCEPTIONTABLE_ENTRY_EFAULT(2b, 3b)
ASM_EXCEPTIONTABLE_ENTRY_EFAULT(1b, 3b, "%0")
ASM_EXCEPTIONTABLE_ENTRY_EFAULT(2b, 3b, "%0")
: "+r" (ret)
: "r" (val), "r" (regs->ior), "r" (regs->isr)
: "r19", "r20", "r21", "r22", "r1" );
@ -329,10 +329,10 @@ static int emulate_std(struct pt_regs *regs, int frreg, int flop)
"3: std %%r20,0(%%sr1,%2)\n"
"4: std %%r21,8(%%sr1,%2)\n"
"5: \n"
ASM_EXCEPTIONTABLE_ENTRY_EFAULT(1b, 5b)
ASM_EXCEPTIONTABLE_ENTRY_EFAULT(2b, 5b)
ASM_EXCEPTIONTABLE_ENTRY_EFAULT(3b, 5b)
ASM_EXCEPTIONTABLE_ENTRY_EFAULT(4b, 5b)
ASM_EXCEPTIONTABLE_ENTRY_EFAULT(1b, 5b, "%0")
ASM_EXCEPTIONTABLE_ENTRY_EFAULT(2b, 5b, "%0")
ASM_EXCEPTIONTABLE_ENTRY_EFAULT(3b, 5b, "%0")
ASM_EXCEPTIONTABLE_ENTRY_EFAULT(4b, 5b, "%0")
: "+r" (ret)
: "r" (val), "r" (regs->ior), "r" (regs->isr)
: "r19", "r20", "r21", "r22", "r1" );
@ -357,11 +357,11 @@ static int emulate_std(struct pt_regs *regs, int frreg, int flop)
"4: stw %%r1,4(%%sr1,%2)\n"
"5: stw %R1,8(%%sr1,%2)\n"
"6: \n"
ASM_EXCEPTIONTABLE_ENTRY_EFAULT(1b, 6b)
ASM_EXCEPTIONTABLE_ENTRY_EFAULT(2b, 6b)
ASM_EXCEPTIONTABLE_ENTRY_EFAULT(3b, 6b)
ASM_EXCEPTIONTABLE_ENTRY_EFAULT(4b, 6b)
ASM_EXCEPTIONTABLE_ENTRY_EFAULT(5b, 6b)
ASM_EXCEPTIONTABLE_ENTRY_EFAULT(1b, 6b, "%0")
ASM_EXCEPTIONTABLE_ENTRY_EFAULT(2b, 6b, "%0")
ASM_EXCEPTIONTABLE_ENTRY_EFAULT(3b, 6b, "%0")
ASM_EXCEPTIONTABLE_ENTRY_EFAULT(4b, 6b, "%0")
ASM_EXCEPTIONTABLE_ENTRY_EFAULT(5b, 6b, "%0")
: "+r" (ret)
: "r" (val), "r" (regs->ior), "r" (regs->isr)
: "r19", "r20", "r21", "r1" );

View File

@ -127,7 +127,7 @@ SECTIONS
}
#endif
RO_DATA(8)
RO_DATA(PAGE_SIZE)
/* unwind info */
. = ALIGN(4);

View File

@ -150,11 +150,16 @@ int fixup_exception(struct pt_regs *regs)
* Fix up get_user() and put_user().
* ASM_EXCEPTIONTABLE_ENTRY_EFAULT() sets the least-significant
* bit in the relative address of the fixup routine to indicate
* that gr[ASM_EXCEPTIONTABLE_REG] should be loaded with
* -EFAULT to report a userspace access error.
* that the register encoded in the "or %r0,%r0,register"
* opcode should be loaded with -EFAULT to report a userspace
* access error.
*/
if (fix->fixup & 1) {
regs->gr[ASM_EXCEPTIONTABLE_REG] = -EFAULT;
int fault_error_reg = fix->err_opcode & 0x1f;
if (!WARN_ON(!fault_error_reg))
regs->gr[fault_error_reg] = -EFAULT;
pr_debug("Unalignment fixup of register %d at %pS\n",
fault_error_reg, (void*)regs->iaoq[0]);
/* zero target register for get_user() */
if (parisc_acctyp(0, regs->iir) == VM_READ) {

View File

@ -93,144 +93,160 @@
<&cpu63_intc 3>;
};
clint_mtimer0: timer@70ac000000 {
clint_mtimer0: timer@70ac004000 {
compatible = "sophgo,sg2042-aclint-mtimer", "thead,c900-aclint-mtimer";
reg = <0x00000070 0xac000000 0x00000000 0x00007ff8>;
reg = <0x00000070 0xac004000 0x00000000 0x0000c000>;
reg-names = "mtimecmp";
interrupts-extended = <&cpu0_intc 7>,
<&cpu1_intc 7>,
<&cpu2_intc 7>,
<&cpu3_intc 7>;
};
clint_mtimer1: timer@70ac010000 {
clint_mtimer1: timer@70ac014000 {
compatible = "sophgo,sg2042-aclint-mtimer", "thead,c900-aclint-mtimer";
reg = <0x00000070 0xac010000 0x00000000 0x00007ff8>;
reg = <0x00000070 0xac014000 0x00000000 0x0000c000>;
reg-names = "mtimecmp";
interrupts-extended = <&cpu4_intc 7>,
<&cpu5_intc 7>,
<&cpu6_intc 7>,
<&cpu7_intc 7>;
};
clint_mtimer2: timer@70ac020000 {
clint_mtimer2: timer@70ac024000 {
compatible = "sophgo,sg2042-aclint-mtimer", "thead,c900-aclint-mtimer";
reg = <0x00000070 0xac020000 0x00000000 0x00007ff8>;
reg = <0x00000070 0xac024000 0x00000000 0x0000c000>;
reg-names = "mtimecmp";
interrupts-extended = <&cpu8_intc 7>,
<&cpu9_intc 7>,
<&cpu10_intc 7>,
<&cpu11_intc 7>;
};
clint_mtimer3: timer@70ac030000 {
clint_mtimer3: timer@70ac034000 {
compatible = "sophgo,sg2042-aclint-mtimer", "thead,c900-aclint-mtimer";
reg = <0x00000070 0xac030000 0x00000000 0x00007ff8>;
reg = <0x00000070 0xac034000 0x00000000 0x0000c000>;
reg-names = "mtimecmp";
interrupts-extended = <&cpu12_intc 7>,
<&cpu13_intc 7>,
<&cpu14_intc 7>,
<&cpu15_intc 7>;
};
clint_mtimer4: timer@70ac040000 {
clint_mtimer4: timer@70ac044000 {
compatible = "sophgo,sg2042-aclint-mtimer", "thead,c900-aclint-mtimer";
reg = <0x00000070 0xac040000 0x00000000 0x00007ff8>;
reg = <0x00000070 0xac044000 0x00000000 0x0000c000>;
reg-names = "mtimecmp";
interrupts-extended = <&cpu16_intc 7>,
<&cpu17_intc 7>,
<&cpu18_intc 7>,
<&cpu19_intc 7>;
};
clint_mtimer5: timer@70ac050000 {
clint_mtimer5: timer@70ac054000 {
compatible = "sophgo,sg2042-aclint-mtimer", "thead,c900-aclint-mtimer";
reg = <0x00000070 0xac050000 0x00000000 0x00007ff8>;
reg = <0x00000070 0xac054000 0x00000000 0x0000c000>;
reg-names = "mtimecmp";
interrupts-extended = <&cpu20_intc 7>,
<&cpu21_intc 7>,
<&cpu22_intc 7>,
<&cpu23_intc 7>;
};
clint_mtimer6: timer@70ac060000 {
clint_mtimer6: timer@70ac064000 {
compatible = "sophgo,sg2042-aclint-mtimer", "thead,c900-aclint-mtimer";
reg = <0x00000070 0xac060000 0x00000000 0x00007ff8>;
reg = <0x00000070 0xac064000 0x00000000 0x0000c000>;
reg-names = "mtimecmp";
interrupts-extended = <&cpu24_intc 7>,
<&cpu25_intc 7>,
<&cpu26_intc 7>,
<&cpu27_intc 7>;
};
clint_mtimer7: timer@70ac070000 {
clint_mtimer7: timer@70ac074000 {
compatible = "sophgo,sg2042-aclint-mtimer", "thead,c900-aclint-mtimer";
reg = <0x00000070 0xac070000 0x00000000 0x00007ff8>;
reg = <0x00000070 0xac074000 0x00000000 0x0000c000>;
reg-names = "mtimecmp";
interrupts-extended = <&cpu28_intc 7>,
<&cpu29_intc 7>,
<&cpu30_intc 7>,
<&cpu31_intc 7>;
};
clint_mtimer8: timer@70ac080000 {
clint_mtimer8: timer@70ac084000 {
compatible = "sophgo,sg2042-aclint-mtimer", "thead,c900-aclint-mtimer";
reg = <0x00000070 0xac080000 0x00000000 0x00007ff8>;
reg = <0x00000070 0xac084000 0x00000000 0x0000c000>;
reg-names = "mtimecmp";
interrupts-extended = <&cpu32_intc 7>,
<&cpu33_intc 7>,
<&cpu34_intc 7>,
<&cpu35_intc 7>;
};
clint_mtimer9: timer@70ac090000 {
clint_mtimer9: timer@70ac094000 {
compatible = "sophgo,sg2042-aclint-mtimer", "thead,c900-aclint-mtimer";
reg = <0x00000070 0xac090000 0x00000000 0x00007ff8>;
reg = <0x00000070 0xac094000 0x00000000 0x0000c000>;
reg-names = "mtimecmp";
interrupts-extended = <&cpu36_intc 7>,
<&cpu37_intc 7>,
<&cpu38_intc 7>,
<&cpu39_intc 7>;
};
clint_mtimer10: timer@70ac0a0000 {
clint_mtimer10: timer@70ac0a4000 {
compatible = "sophgo,sg2042-aclint-mtimer", "thead,c900-aclint-mtimer";
reg = <0x00000070 0xac0a0000 0x00000000 0x00007ff8>;
reg = <0x00000070 0xac0a4000 0x00000000 0x0000c000>;
reg-names = "mtimecmp";
interrupts-extended = <&cpu40_intc 7>,
<&cpu41_intc 7>,
<&cpu42_intc 7>,
<&cpu43_intc 7>;
};
clint_mtimer11: timer@70ac0b0000 {
clint_mtimer11: timer@70ac0b4000 {
compatible = "sophgo,sg2042-aclint-mtimer", "thead,c900-aclint-mtimer";
reg = <0x00000070 0xac0b0000 0x00000000 0x00007ff8>;
reg = <0x00000070 0xac0b4000 0x00000000 0x0000c000>;
reg-names = "mtimecmp";
interrupts-extended = <&cpu44_intc 7>,
<&cpu45_intc 7>,
<&cpu46_intc 7>,
<&cpu47_intc 7>;
};
clint_mtimer12: timer@70ac0c0000 {
clint_mtimer12: timer@70ac0c4000 {
compatible = "sophgo,sg2042-aclint-mtimer", "thead,c900-aclint-mtimer";
reg = <0x00000070 0xac0c0000 0x00000000 0x00007ff8>;
reg = <0x00000070 0xac0c4000 0x00000000 0x0000c000>;
reg-names = "mtimecmp";
interrupts-extended = <&cpu48_intc 7>,
<&cpu49_intc 7>,
<&cpu50_intc 7>,
<&cpu51_intc 7>;
};
clint_mtimer13: timer@70ac0d0000 {
clint_mtimer13: timer@70ac0d4000 {
compatible = "sophgo,sg2042-aclint-mtimer", "thead,c900-aclint-mtimer";
reg = <0x00000070 0xac0d0000 0x00000000 0x00007ff8>;
reg = <0x00000070 0xac0d4000 0x00000000 0x0000c000>;
reg-names = "mtimecmp";
interrupts-extended = <&cpu52_intc 7>,
<&cpu53_intc 7>,
<&cpu54_intc 7>,
<&cpu55_intc 7>;
};
clint_mtimer14: timer@70ac0e0000 {
clint_mtimer14: timer@70ac0e4000 {
compatible = "sophgo,sg2042-aclint-mtimer", "thead,c900-aclint-mtimer";
reg = <0x00000070 0xac0e0000 0x00000000 0x00007ff8>;
reg = <0x00000070 0xac0e4000 0x00000000 0x0000c000>;
reg-names = "mtimecmp";
interrupts-extended = <&cpu56_intc 7>,
<&cpu57_intc 7>,
<&cpu58_intc 7>,
<&cpu59_intc 7>;
};
clint_mtimer15: timer@70ac0f0000 {
clint_mtimer15: timer@70ac0f4000 {
compatible = "sophgo,sg2042-aclint-mtimer", "thead,c900-aclint-mtimer";
reg = <0x00000070 0xac0f0000 0x00000000 0x00007ff8>;
reg = <0x00000070 0xac0f4000 0x00000000 0x0000c000>;
reg-names = "mtimecmp";
interrupts-extended = <&cpu60_intc 7>,
<&cpu61_intc 7>,
<&cpu62_intc 7>,

View File

@ -115,7 +115,9 @@ archprepare:
$(Q)$(MAKE) $(build)=$(HOST_DIR)/um include/generated/user_constants.h
LINK-$(CONFIG_LD_SCRIPT_STATIC) += -static
LINK-$(CONFIG_LD_SCRIPT_DYN) += $(call cc-option, -no-pie)
ifdef CONFIG_LD_SCRIPT_DYN
LINK-$(call gcc-min-version, 60100)$(CONFIG_CC_IS_CLANG) += -no-pie
endif
LINK-$(CONFIG_LD_SCRIPT_DYN_RPATH) += -Wl,-rpath,/lib
CFLAGS_NO_HARDENING := $(call cc-option, -fno-PIC,) $(call cc-option, -fno-pic,) \

View File

@ -112,13 +112,13 @@ ifeq ($(CONFIG_X86_32),y)
# temporary until string.h is fixed
KBUILD_CFLAGS += -ffreestanding
ifeq ($(CONFIG_STACKPROTECTOR),y)
ifeq ($(CONFIG_SMP),y)
ifeq ($(CONFIG_STACKPROTECTOR),y)
ifeq ($(CONFIG_SMP),y)
KBUILD_CFLAGS += -mstack-protector-guard-reg=fs -mstack-protector-guard-symbol=__stack_chk_guard
else
else
KBUILD_CFLAGS += -mstack-protector-guard=global
endif
endif
endif
endif
else
BITS := 64
UTS_MACHINE := x86_64

View File

@ -81,10 +81,8 @@
#define X86_FEATURE_K6_MTRR ( 3*32+ 1) /* AMD K6 nonstandard MTRRs */
#define X86_FEATURE_CYRIX_ARR ( 3*32+ 2) /* Cyrix ARRs (= MTRRs) */
#define X86_FEATURE_CENTAUR_MCR ( 3*32+ 3) /* Centaur MCRs (= MTRRs) */
/* CPU types for specific tunings: */
#define X86_FEATURE_K8 ( 3*32+ 4) /* "" Opteron, Athlon64 */
/* FREE, was #define X86_FEATURE_K7 ( 3*32+ 5) "" Athlon */
#define X86_FEATURE_ZEN5 ( 3*32+ 5) /* "" CPU based on Zen5 microarchitecture */
#define X86_FEATURE_P3 ( 3*32+ 6) /* "" P3 */
#define X86_FEATURE_P4 ( 3*32+ 7) /* "" P4 */
#define X86_FEATURE_CONSTANT_TSC ( 3*32+ 8) /* TSC ticks at a constant rate */

View File

@ -162,6 +162,8 @@
#define INTEL_FAM6_ATOM_CRESTMONT_X 0xAF /* Sierra Forest */
#define INTEL_FAM6_ATOM_CRESTMONT 0xB6 /* Grand Ridge */
#define INTEL_FAM6_ATOM_DARKMONT_X 0xDD /* Clearwater Forest */
/* Xeon Phi */
#define INTEL_FAM6_XEON_PHI_KNL 0x57 /* Knights Landing */

View File

@ -64,6 +64,7 @@ static inline bool kmsan_virt_addr_valid(void *addr)
{
unsigned long x = (unsigned long)addr;
unsigned long y = x - __START_KERNEL_map;
bool ret;
/* use the carry flag to determine if x was < __START_KERNEL_map */
if (unlikely(x > y)) {
@ -79,7 +80,21 @@ static inline bool kmsan_virt_addr_valid(void *addr)
return false;
}
return pfn_valid(x >> PAGE_SHIFT);
/*
* pfn_valid() relies on RCU, and may call into the scheduler on exiting
* the critical section. However, this would result in recursion with
* KMSAN. Therefore, disable preemption here, and re-enable preemption
* below while suppressing reschedules to avoid recursion.
*
* Note, this sacrifices occasionally breaking scheduling guarantees.
* Although, a kernel compiled with KMSAN has already given up on any
* performance guarantees due to being heavily instrumented.
*/
preempt_disable();
ret = pfn_valid(x >> PAGE_SHIFT);
preempt_enable_no_resched();
return ret;
}
#endif /* !MODULE */

View File

@ -58,12 +58,29 @@ extern long __ia32_sys_ni_syscall(const struct pt_regs *regs);
,,regs->di,,regs->si,,regs->dx \
,,regs->r10,,regs->r8,,regs->r9) \
/* SYSCALL_PT_ARGS is Adapted from s390x */
#define SYSCALL_PT_ARG6(m, t1, t2, t3, t4, t5, t6) \
SYSCALL_PT_ARG5(m, t1, t2, t3, t4, t5), m(t6, (regs->bp))
#define SYSCALL_PT_ARG5(m, t1, t2, t3, t4, t5) \
SYSCALL_PT_ARG4(m, t1, t2, t3, t4), m(t5, (regs->di))
#define SYSCALL_PT_ARG4(m, t1, t2, t3, t4) \
SYSCALL_PT_ARG3(m, t1, t2, t3), m(t4, (regs->si))
#define SYSCALL_PT_ARG3(m, t1, t2, t3) \
SYSCALL_PT_ARG2(m, t1, t2), m(t3, (regs->dx))
#define SYSCALL_PT_ARG2(m, t1, t2) \
SYSCALL_PT_ARG1(m, t1), m(t2, (regs->cx))
#define SYSCALL_PT_ARG1(m, t1) m(t1, (regs->bx))
#define SYSCALL_PT_ARGS(x, ...) SYSCALL_PT_ARG##x(__VA_ARGS__)
#define __SC_COMPAT_CAST(t, a) \
(__typeof(__builtin_choose_expr(__TYPE_IS_L(t), 0, 0U))) \
(unsigned int)a
/* Mapping of registers to parameters for syscalls on i386 */
#define SC_IA32_REGS_TO_ARGS(x, ...) \
__MAP(x,__SC_ARGS \
,,(unsigned int)regs->bx,,(unsigned int)regs->cx \
,,(unsigned int)regs->dx,,(unsigned int)regs->si \
,,(unsigned int)regs->di,,(unsigned int)regs->bp)
SYSCALL_PT_ARGS(x, __SC_COMPAT_CAST, \
__MAP(x, __SC_TYPE, __VA_ARGS__)) \
#define __SYS_STUB0(abi, name) \
long __##abi##_##name(const struct pt_regs *regs); \

View File

@ -403,7 +403,7 @@ noinstr void BUG_func(void)
{
BUG();
}
EXPORT_SYMBOL_GPL(BUG_func);
EXPORT_SYMBOL(BUG_func);
#define CALL_RIP_REL_OPCODE 0xff
#define CALL_RIP_REL_MODRM 0x15

View File

@ -538,7 +538,7 @@ static void bsp_init_amd(struct cpuinfo_x86 *c)
/* Figure out Zen generations: */
switch (c->x86) {
case 0x17: {
case 0x17:
switch (c->x86_model) {
case 0x00 ... 0x2f:
case 0x50 ... 0x5f:
@ -554,8 +554,8 @@ static void bsp_init_amd(struct cpuinfo_x86 *c)
goto warn;
}
break;
}
case 0x19: {
case 0x19:
switch (c->x86_model) {
case 0x00 ... 0x0f:
case 0x20 ... 0x5f:
@ -569,7 +569,20 @@ static void bsp_init_amd(struct cpuinfo_x86 *c)
goto warn;
}
break;
}
case 0x1a:
switch (c->x86_model) {
case 0x00 ... 0x0f:
case 0x20 ... 0x2f:
case 0x40 ... 0x4f:
case 0x70 ... 0x7f:
setup_force_cpu_cap(X86_FEATURE_ZEN5);
break;
default:
goto warn;
}
break;
default:
break;
}
@ -1039,6 +1052,11 @@ static void init_amd_zen4(struct cpuinfo_x86 *c)
msr_set_bit(MSR_ZEN4_BP_CFG, MSR_ZEN4_BP_CFG_SHARED_BTB_FIX_BIT);
}
static void init_amd_zen5(struct cpuinfo_x86 *c)
{
init_amd_zen_common();
}
static void init_amd(struct cpuinfo_x86 *c)
{
u64 vm_cr;
@ -1084,6 +1102,8 @@ static void init_amd(struct cpuinfo_x86 *c)
init_amd_zen3(c);
else if (boot_cpu_has(X86_FEATURE_ZEN4))
init_amd_zen4(c);
else if (boot_cpu_has(X86_FEATURE_ZEN5))
init_amd_zen5(c);
/*
* Enable workaround for FXSAVE leak on CPUs

View File

@ -205,12 +205,19 @@ static int bio_copy_user_iov(struct request *rq, struct rq_map_data *map_data,
/*
* success
*/
if ((iov_iter_rw(iter) == WRITE &&
(!map_data || !map_data->null_mapped)) ||
(map_data && map_data->from_user)) {
if (iov_iter_rw(iter) == WRITE &&
(!map_data || !map_data->null_mapped)) {
ret = bio_copy_from_iter(bio, iter);
if (ret)
goto cleanup;
} else if (map_data && map_data->from_user) {
struct iov_iter iter2 = *iter;
/* This is the copy-in part of SG_DXFER_TO_FROM_DEV. */
iter2.data_source = ITER_SOURCE;
ret = bio_copy_from_iter(bio, &iter2);
if (ret)
goto cleanup;
} else {
if (bmd->is_our_pages)
zero_fill_bio(bio);

View File

@ -20,8 +20,6 @@ static int blkpg_do_ioctl(struct block_device *bdev,
struct blkpg_partition p;
sector_t start, length;
if (disk->flags & GENHD_FL_NO_PART)
return -EINVAL;
if (!capable(CAP_SYS_ADMIN))
return -EACCES;
if (copy_from_user(&p, upart, sizeof(struct blkpg_partition)))

View File

@ -439,6 +439,11 @@ int bdev_add_partition(struct gendisk *disk, int partno, sector_t start,
goto out;
}
if (disk->flags & GENHD_FL_NO_PART) {
ret = -EINVAL;
goto out;
}
if (partition_overlaps(disk, start, length, -1)) {
ret = -EBUSY;
goto out;

View File

@ -102,7 +102,7 @@ static int reset_pending_show(struct seq_file *s, void *v)
{
struct ivpu_device *vdev = seq_to_ivpu(s);
seq_printf(s, "%d\n", atomic_read(&vdev->pm->in_reset));
seq_printf(s, "%d\n", atomic_read(&vdev->pm->reset_pending));
return 0;
}
@ -130,7 +130,9 @@ dvfs_mode_fops_write(struct file *file, const char __user *user_buf, size_t size
fw->dvfs_mode = dvfs_mode;
ivpu_pm_schedule_recovery(vdev);
ret = pci_try_reset_function(to_pci_dev(vdev->drm.dev));
if (ret)
return ret;
return size;
}
@ -190,7 +192,10 @@ fw_profiling_freq_fops_write(struct file *file, const char __user *user_buf,
return ret;
ivpu_hw_profiling_freq_drive(vdev, enable);
ivpu_pm_schedule_recovery(vdev);
ret = pci_try_reset_function(to_pci_dev(vdev->drm.dev));
if (ret)
return ret;
return size;
}
@ -301,11 +306,18 @@ static ssize_t
ivpu_force_recovery_fn(struct file *file, const char __user *user_buf, size_t size, loff_t *pos)
{
struct ivpu_device *vdev = file->private_data;
int ret;
if (!size)
return -EINVAL;
ivpu_pm_schedule_recovery(vdev);
ret = ivpu_rpm_get(vdev);
if (ret)
return ret;
ivpu_pm_trigger_recovery(vdev, "debugfs");
flush_work(&vdev->pm->recovery_work);
ivpu_rpm_put(vdev);
return size;
}

View File

@ -6,6 +6,7 @@
#include <linux/firmware.h>
#include <linux/module.h>
#include <linux/pci.h>
#include <linux/pm_runtime.h>
#include <drm/drm_accel.h>
#include <drm/drm_file.h>
@ -17,6 +18,7 @@
#include "ivpu_debugfs.h"
#include "ivpu_drv.h"
#include "ivpu_fw.h"
#include "ivpu_fw_log.h"
#include "ivpu_gem.h"
#include "ivpu_hw.h"
#include "ivpu_ipc.h"
@ -65,22 +67,20 @@ struct ivpu_file_priv *ivpu_file_priv_get(struct ivpu_file_priv *file_priv)
return file_priv;
}
struct ivpu_file_priv *ivpu_file_priv_get_by_ctx_id(struct ivpu_device *vdev, unsigned long id)
static void file_priv_unbind(struct ivpu_device *vdev, struct ivpu_file_priv *file_priv)
{
struct ivpu_file_priv *file_priv;
mutex_lock(&file_priv->lock);
if (file_priv->bound) {
ivpu_dbg(vdev, FILE, "file_priv unbind: ctx %u\n", file_priv->ctx.id);
xa_lock_irq(&vdev->context_xa);
file_priv = xa_load(&vdev->context_xa, id);
/* file_priv may still be in context_xa during file_priv_release() */
if (file_priv && !kref_get_unless_zero(&file_priv->ref))
file_priv = NULL;
xa_unlock_irq(&vdev->context_xa);
if (file_priv)
ivpu_dbg(vdev, KREF, "file_priv get by id: ctx %u refcount %u\n",
file_priv->ctx.id, kref_read(&file_priv->ref));
return file_priv;
ivpu_cmdq_release_all_locked(file_priv);
ivpu_jsm_context_release(vdev, file_priv->ctx.id);
ivpu_bo_unbind_all_bos_from_context(vdev, &file_priv->ctx);
ivpu_mmu_user_context_fini(vdev, &file_priv->ctx);
file_priv->bound = false;
drm_WARN_ON(&vdev->drm, !xa_erase_irq(&vdev->context_xa, file_priv->ctx.id));
}
mutex_unlock(&file_priv->lock);
}
static void file_priv_release(struct kref *ref)
@ -88,13 +88,15 @@ static void file_priv_release(struct kref *ref)
struct ivpu_file_priv *file_priv = container_of(ref, struct ivpu_file_priv, ref);
struct ivpu_device *vdev = file_priv->vdev;
ivpu_dbg(vdev, FILE, "file_priv release: ctx %u\n", file_priv->ctx.id);
ivpu_dbg(vdev, FILE, "file_priv release: ctx %u bound %d\n",
file_priv->ctx.id, (bool)file_priv->bound);
pm_runtime_get_sync(vdev->drm.dev);
mutex_lock(&vdev->context_list_lock);
file_priv_unbind(vdev, file_priv);
mutex_unlock(&vdev->context_list_lock);
pm_runtime_put_autosuspend(vdev->drm.dev);
ivpu_cmdq_release_all(file_priv);
ivpu_jsm_context_release(vdev, file_priv->ctx.id);
ivpu_bo_remove_all_bos_from_context(vdev, &file_priv->ctx);
ivpu_mmu_user_context_fini(vdev, &file_priv->ctx);
drm_WARN_ON(&vdev->drm, xa_erase_irq(&vdev->context_xa, file_priv->ctx.id) != file_priv);
mutex_destroy(&file_priv->lock);
kfree(file_priv);
}
@ -176,9 +178,6 @@ static int ivpu_get_param_ioctl(struct drm_device *dev, void *data, struct drm_f
case DRM_IVPU_PARAM_CONTEXT_BASE_ADDRESS:
args->value = vdev->hw->ranges.user.start;
break;
case DRM_IVPU_PARAM_CONTEXT_PRIORITY:
args->value = file_priv->priority;
break;
case DRM_IVPU_PARAM_CONTEXT_ID:
args->value = file_priv->ctx.id;
break;
@ -218,17 +217,10 @@ static int ivpu_get_param_ioctl(struct drm_device *dev, void *data, struct drm_f
static int ivpu_set_param_ioctl(struct drm_device *dev, void *data, struct drm_file *file)
{
struct ivpu_file_priv *file_priv = file->driver_priv;
struct drm_ivpu_param *args = data;
int ret = 0;
switch (args->param) {
case DRM_IVPU_PARAM_CONTEXT_PRIORITY:
if (args->value <= DRM_IVPU_CONTEXT_PRIORITY_REALTIME)
file_priv->priority = args->value;
else
ret = -EINVAL;
break;
default:
ret = -EINVAL;
}
@ -241,50 +233,53 @@ static int ivpu_open(struct drm_device *dev, struct drm_file *file)
struct ivpu_device *vdev = to_ivpu_device(dev);
struct ivpu_file_priv *file_priv;
u32 ctx_id;
void *old;
int ret;
int idx, ret;
ret = xa_alloc_irq(&vdev->context_xa, &ctx_id, NULL, vdev->context_xa_limit, GFP_KERNEL);
if (ret) {
ivpu_err(vdev, "Failed to allocate context id: %d\n", ret);
return ret;
}
if (!drm_dev_enter(dev, &idx))
return -ENODEV;
file_priv = kzalloc(sizeof(*file_priv), GFP_KERNEL);
if (!file_priv) {
ret = -ENOMEM;
goto err_xa_erase;
goto err_dev_exit;
}
file_priv->vdev = vdev;
file_priv->priority = DRM_IVPU_CONTEXT_PRIORITY_NORMAL;
file_priv->bound = true;
kref_init(&file_priv->ref);
mutex_init(&file_priv->lock);
mutex_lock(&vdev->context_list_lock);
ret = xa_alloc_irq(&vdev->context_xa, &ctx_id, file_priv,
vdev->context_xa_limit, GFP_KERNEL);
if (ret) {
ivpu_err(vdev, "Failed to allocate context id: %d\n", ret);
goto err_unlock;
}
ret = ivpu_mmu_user_context_init(vdev, &file_priv->ctx, ctx_id);
if (ret)
goto err_mutex_destroy;
goto err_xa_erase;
old = xa_store_irq(&vdev->context_xa, ctx_id, file_priv, GFP_KERNEL);
if (xa_is_err(old)) {
ret = xa_err(old);
ivpu_err(vdev, "Failed to store context %u: %d\n", ctx_id, ret);
goto err_ctx_fini;
}
mutex_unlock(&vdev->context_list_lock);
drm_dev_exit(idx);
file->driver_priv = file_priv;
ivpu_dbg(vdev, FILE, "file_priv create: ctx %u process %s pid %d\n",
ctx_id, current->comm, task_pid_nr(current));
file->driver_priv = file_priv;
return 0;
err_ctx_fini:
ivpu_mmu_user_context_fini(vdev, &file_priv->ctx);
err_mutex_destroy:
mutex_destroy(&file_priv->lock);
kfree(file_priv);
err_xa_erase:
xa_erase_irq(&vdev->context_xa, ctx_id);
err_unlock:
mutex_unlock(&vdev->context_list_lock);
mutex_destroy(&file_priv->lock);
kfree(file_priv);
err_dev_exit:
drm_dev_exit(idx);
return ret;
}
@ -340,8 +335,6 @@ static int ivpu_wait_for_ready(struct ivpu_device *vdev)
if (!ret)
ivpu_dbg(vdev, PM, "VPU ready message received successfully\n");
else
ivpu_hw_diagnose_failure(vdev);
return ret;
}
@ -369,6 +362,9 @@ int ivpu_boot(struct ivpu_device *vdev)
ret = ivpu_wait_for_ready(vdev);
if (ret) {
ivpu_err(vdev, "Failed to boot the firmware: %d\n", ret);
ivpu_hw_diagnose_failure(vdev);
ivpu_mmu_evtq_dump(vdev);
ivpu_fw_log_dump(vdev);
return ret;
}
@ -540,6 +536,10 @@ static int ivpu_dev_init(struct ivpu_device *vdev)
lockdep_set_class(&vdev->submitted_jobs_xa.xa_lock, &submitted_jobs_xa_lock_class_key);
INIT_LIST_HEAD(&vdev->bo_list);
ret = drmm_mutex_init(&vdev->drm, &vdev->context_list_lock);
if (ret)
goto err_xa_destroy;
ret = drmm_mutex_init(&vdev->drm, &vdev->bo_list_lock);
if (ret)
goto err_xa_destroy;
@ -611,14 +611,30 @@ err_xa_destroy:
return ret;
}
static void ivpu_bo_unbind_all_user_contexts(struct ivpu_device *vdev)
{
struct ivpu_file_priv *file_priv;
unsigned long ctx_id;
mutex_lock(&vdev->context_list_lock);
xa_for_each(&vdev->context_xa, ctx_id, file_priv)
file_priv_unbind(vdev, file_priv);
mutex_unlock(&vdev->context_list_lock);
}
static void ivpu_dev_fini(struct ivpu_device *vdev)
{
ivpu_pm_disable(vdev);
ivpu_shutdown(vdev);
if (IVPU_WA(d3hot_after_power_off))
pci_set_power_state(to_pci_dev(vdev->drm.dev), PCI_D3hot);
ivpu_jobs_abort_all(vdev);
ivpu_job_done_consumer_fini(vdev);
ivpu_pm_cancel_recovery(vdev);
ivpu_bo_unbind_all_user_contexts(vdev);
ivpu_ipc_fini(vdev);
ivpu_fw_fini(vdev);

View File

@ -56,6 +56,7 @@
#define IVPU_DBG_JSM BIT(10)
#define IVPU_DBG_KREF BIT(11)
#define IVPU_DBG_RPM BIT(12)
#define IVPU_DBG_MMU_MAP BIT(13)
#define ivpu_err(vdev, fmt, ...) \
drm_err(&(vdev)->drm, "%s(): " fmt, __func__, ##__VA_ARGS__)
@ -114,6 +115,7 @@ struct ivpu_device {
struct ivpu_mmu_context gctx;
struct ivpu_mmu_context rctx;
struct mutex context_list_lock; /* Protects user context addition/removal */
struct xarray context_xa;
struct xa_limit context_xa_limit;
@ -145,8 +147,8 @@ struct ivpu_file_priv {
struct mutex lock; /* Protects cmdq */
struct ivpu_cmdq *cmdq[IVPU_NUM_ENGINES];
struct ivpu_mmu_context ctx;
u32 priority;
bool has_mmu_faults;
bool bound;
};
extern int ivpu_dbg_mask;
@ -162,7 +164,6 @@ extern bool ivpu_disable_mmu_cont_pages;
extern int ivpu_test_mode;
struct ivpu_file_priv *ivpu_file_priv_get(struct ivpu_file_priv *file_priv);
struct ivpu_file_priv *ivpu_file_priv_get_by_ctx_id(struct ivpu_device *vdev, unsigned long id);
void ivpu_file_priv_put(struct ivpu_file_priv **link);
int ivpu_boot(struct ivpu_device *vdev);

Some files were not shown because too many files have changed in this diff Show More