From c71c4e49afe173823a2a85b0cabc9b3f1176ffa2 Mon Sep 17 00:00:00 2001 From: Michael Chan Date: Sun, 26 Apr 2020 16:24:38 -0400 Subject: [PATCH 1/5] bnxt_en: Fix VF anti-spoof filter setup. Fix the logic that sets the enable/disable flag for the source MAC filter according to firmware spec 1.7.1. In the original firmware spec. before 1.7.1, the VF spoof check flags were not latched after making the HWRM_FUNC_CFG call, so there was a need to keep the func_flags so that subsequent calls would perserve the VF spoof check setting. A change was made in the 1.7.1 spec so that the flags became latched. So we now set or clear the anti- spoof setting directly without retrieving the old settings in the stored vf->func_flags which are no longer valid. We also remove the unneeded vf->func_flags. Fixes: 8eb992e876a8 ("bnxt_en: Update firmware interface spec to 1.7.6.2.") Signed-off-by: Michael Chan Signed-off-by: David S. Miller --- drivers/net/ethernet/broadcom/bnxt/bnxt.h | 1 - drivers/net/ethernet/broadcom/bnxt/bnxt_sriov.c | 10 ++-------- 2 files changed, 2 insertions(+), 9 deletions(-) diff --git a/drivers/net/ethernet/broadcom/bnxt/bnxt.h b/drivers/net/ethernet/broadcom/bnxt/bnxt.h index f2caa2756f5b..f6a3250ef1c5 100644 --- a/drivers/net/ethernet/broadcom/bnxt/bnxt.h +++ b/drivers/net/ethernet/broadcom/bnxt/bnxt.h @@ -1066,7 +1066,6 @@ struct bnxt_vf_info { #define BNXT_VF_LINK_FORCED 0x4 #define BNXT_VF_LINK_UP 0x8 #define BNXT_VF_TRUST 0x10 - u32 func_flags; /* func cfg flags */ u32 min_tx_rate; u32 max_tx_rate; void *hwrm_cmd_req_addr; diff --git a/drivers/net/ethernet/broadcom/bnxt/bnxt_sriov.c b/drivers/net/ethernet/broadcom/bnxt/bnxt_sriov.c index 6ea3df6da18c..cea2f9958a1d 100644 --- a/drivers/net/ethernet/broadcom/bnxt/bnxt_sriov.c +++ b/drivers/net/ethernet/broadcom/bnxt/bnxt_sriov.c @@ -85,11 +85,10 @@ int bnxt_set_vf_spoofchk(struct net_device *dev, int vf_id, bool setting) if (old_setting == setting) return 0; - func_flags = vf->func_flags; if (setting) - func_flags |= FUNC_CFG_REQ_FLAGS_SRC_MAC_ADDR_CHECK_ENABLE; + func_flags = FUNC_CFG_REQ_FLAGS_SRC_MAC_ADDR_CHECK_ENABLE; else - func_flags |= FUNC_CFG_REQ_FLAGS_SRC_MAC_ADDR_CHECK_DISABLE; + func_flags = FUNC_CFG_REQ_FLAGS_SRC_MAC_ADDR_CHECK_DISABLE; /*TODO: if the driver supports VLAN filter on guest VLAN, * the spoof check should also include vlan anti-spoofing */ @@ -98,7 +97,6 @@ int bnxt_set_vf_spoofchk(struct net_device *dev, int vf_id, bool setting) req.flags = cpu_to_le32(func_flags); rc = hwrm_send_message(bp, &req, sizeof(req), HWRM_CMD_TIMEOUT); if (!rc) { - vf->func_flags = func_flags; if (setting) vf->flags |= BNXT_VF_SPOOFCHK; else @@ -228,7 +226,6 @@ int bnxt_set_vf_mac(struct net_device *dev, int vf_id, u8 *mac) memcpy(vf->mac_addr, mac, ETH_ALEN); bnxt_hwrm_cmd_hdr_init(bp, &req, HWRM_FUNC_CFG, -1, -1); req.fid = cpu_to_le16(vf->fw_fid); - req.flags = cpu_to_le32(vf->func_flags); req.enables = cpu_to_le32(FUNC_CFG_REQ_ENABLES_DFLT_MAC_ADDR); memcpy(req.dflt_mac_addr, mac, ETH_ALEN); return hwrm_send_message(bp, &req, sizeof(req), HWRM_CMD_TIMEOUT); @@ -266,7 +263,6 @@ int bnxt_set_vf_vlan(struct net_device *dev, int vf_id, u16 vlan_id, u8 qos, bnxt_hwrm_cmd_hdr_init(bp, &req, HWRM_FUNC_CFG, -1, -1); req.fid = cpu_to_le16(vf->fw_fid); - req.flags = cpu_to_le32(vf->func_flags); req.dflt_vlan = cpu_to_le16(vlan_tag); req.enables = cpu_to_le32(FUNC_CFG_REQ_ENABLES_DFLT_VLAN); rc = hwrm_send_message(bp, &req, sizeof(req), HWRM_CMD_TIMEOUT); @@ -305,7 +301,6 @@ int bnxt_set_vf_bw(struct net_device *dev, int vf_id, int min_tx_rate, return 0; bnxt_hwrm_cmd_hdr_init(bp, &req, HWRM_FUNC_CFG, -1, -1); req.fid = cpu_to_le16(vf->fw_fid); - req.flags = cpu_to_le32(vf->func_flags); req.enables = cpu_to_le32(FUNC_CFG_REQ_ENABLES_MAX_BW); req.max_bw = cpu_to_le32(max_tx_rate); req.enables |= cpu_to_le32(FUNC_CFG_REQ_ENABLES_MIN_BW); @@ -477,7 +472,6 @@ static void __bnxt_set_vf_params(struct bnxt *bp, int vf_id) vf = &bp->pf.vf[vf_id]; bnxt_hwrm_cmd_hdr_init(bp, &req, HWRM_FUNC_CFG, -1, -1); req.fid = cpu_to_le16(vf->fw_fid); - req.flags = cpu_to_le32(vf->func_flags); if (is_valid_ether_addr(vf->mac_addr)) { req.enables |= cpu_to_le32(FUNC_CFG_REQ_ENABLES_DFLT_MAC_ADDR); From 9e68cb0359b20f99c7b070f1d3305e5e0a9fae6d Mon Sep 17 00:00:00 2001 From: Vasundhara Volam Date: Sun, 26 Apr 2020 16:24:39 -0400 Subject: [PATCH 2/5] bnxt_en: Reduce BNXT_MSIX_VEC_MAX value to supported CQs per PF. Broadcom adapters support only maximum of 512 CQs per PF. If user sets MSIx vectors more than supported CQs, firmware is setting incorrect value for msix_vec_per_pf_max parameter. Fix it by reducing the BNXT_MSIX_VEC_MAX value to 512, even though the maximum # of MSIx vectors supported by adapter are 1280. Fixes: f399e8497826 ("bnxt_en: Use msix_vec_per_pf_max and msix_vec_per_pf_min devlink params.") Signed-off-by: Vasundhara Volam Signed-off-by: Michael Chan Signed-off-by: David S. Miller --- drivers/net/ethernet/broadcom/bnxt/bnxt_devlink.h | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/net/ethernet/broadcom/bnxt/bnxt_devlink.h b/drivers/net/ethernet/broadcom/bnxt/bnxt_devlink.h index 95f893f2a74d..d5c8bd49383a 100644 --- a/drivers/net/ethernet/broadcom/bnxt/bnxt_devlink.h +++ b/drivers/net/ethernet/broadcom/bnxt/bnxt_devlink.h @@ -43,7 +43,7 @@ static inline void bnxt_link_bp_to_dl(struct bnxt *bp, struct devlink *dl) #define BNXT_NVM_CFG_VER_BITS 24 #define BNXT_NVM_CFG_VER_BYTES 4 -#define BNXT_MSIX_VEC_MAX 1280 +#define BNXT_MSIX_VEC_MAX 512 #define BNXT_MSIX_VEC_MIN_MAX 128 enum bnxt_nvm_dir_type { From bae361c54fb6ac6eba3b4762f49ce14beb73ef13 Mon Sep 17 00:00:00 2001 From: Michael Chan Date: Sun, 26 Apr 2020 16:24:40 -0400 Subject: [PATCH 3/5] bnxt_en: Improve AER slot reset. Improve the slot reset sequence by disabling the device to prevent bad DMAs if slot reset fails. Return the proper result instead of always PCI_ERS_RESULT_RECOVERED to the caller. Fixes: 6316ea6db93d ("bnxt_en: Enable AER support.") Signed-off-by: Michael Chan Signed-off-by: David S. Miller --- drivers/net/ethernet/broadcom/bnxt/bnxt.c | 9 ++++++--- 1 file changed, 6 insertions(+), 3 deletions(-) diff --git a/drivers/net/ethernet/broadcom/bnxt/bnxt.c b/drivers/net/ethernet/broadcom/bnxt/bnxt.c index fead64f1ad90..d8db08ec8693 100644 --- a/drivers/net/ethernet/broadcom/bnxt/bnxt.c +++ b/drivers/net/ethernet/broadcom/bnxt/bnxt.c @@ -12212,12 +12212,15 @@ static pci_ers_result_t bnxt_io_slot_reset(struct pci_dev *pdev) bnxt_ulp_start(bp, err); } - if (result != PCI_ERS_RESULT_RECOVERED && netif_running(netdev)) - dev_close(netdev); + if (result != PCI_ERS_RESULT_RECOVERED) { + if (netif_running(netdev)) + dev_close(netdev); + pci_disable_device(pdev); + } rtnl_unlock(); - return PCI_ERS_RESULT_RECOVERED; + return result; } /** From bbf211b1ecb891c7e0cc7888834504183fc8b534 Mon Sep 17 00:00:00 2001 From: Michael Chan Date: Sun, 26 Apr 2020 16:24:41 -0400 Subject: [PATCH 4/5] bnxt_en: Return error when allocating zero size context memory. bnxt_alloc_ctx_pg_tbls() should return error when the memory size of the context memory to set up is zero. By returning success (0), the caller may proceed normally and may crash later when it tries to set up the memory. Fixes: 08fe9d181606 ("bnxt_en: Add Level 2 context memory paging support.") Signed-off-by: Michael Chan Signed-off-by: David S. Miller --- drivers/net/ethernet/broadcom/bnxt/bnxt.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/net/ethernet/broadcom/bnxt/bnxt.c b/drivers/net/ethernet/broadcom/bnxt/bnxt.c index d8db08ec8693..070c42d3318f 100644 --- a/drivers/net/ethernet/broadcom/bnxt/bnxt.c +++ b/drivers/net/ethernet/broadcom/bnxt/bnxt.c @@ -6642,7 +6642,7 @@ static int bnxt_alloc_ctx_pg_tbls(struct bnxt *bp, int rc; if (!mem_size) - return 0; + return -EINVAL; ctx_pg->nr_pages = DIV_ROUND_UP(mem_size, BNXT_PAGE_SIZE); if (ctx_pg->nr_pages > MAX_CTX_TOTAL_PAGES) { From c72cb303aa6c2ae7e4184f0081c6d11bf03fb96b Mon Sep 17 00:00:00 2001 From: Michael Chan Date: Sun, 26 Apr 2020 16:24:42 -0400 Subject: [PATCH 5/5] bnxt_en: Fix VLAN acceleration handling in bnxt_fix_features(). The current logic in bnxt_fix_features() will inadvertently turn on both CTAG and STAG VLAN offload if the user tries to disable both. Fix it by checking that the user is trying to enable CTAG or STAG before enabling both. The logic is supposed to enable or disable both CTAG and STAG together. Fixes: 5a9f6b238e59 ("bnxt_en: Enable and disable RX CTAG and RX STAG VLAN acceleration together.") Signed-off-by: Michael Chan Signed-off-by: David S. Miller --- drivers/net/ethernet/broadcom/bnxt/bnxt.c | 9 ++++++--- 1 file changed, 6 insertions(+), 3 deletions(-) diff --git a/drivers/net/ethernet/broadcom/bnxt/bnxt.c b/drivers/net/ethernet/broadcom/bnxt/bnxt.c index 070c42d3318f..d1a83716d934 100644 --- a/drivers/net/ethernet/broadcom/bnxt/bnxt.c +++ b/drivers/net/ethernet/broadcom/bnxt/bnxt.c @@ -9780,6 +9780,7 @@ static netdev_features_t bnxt_fix_features(struct net_device *dev, netdev_features_t features) { struct bnxt *bp = netdev_priv(dev); + netdev_features_t vlan_features; if ((features & NETIF_F_NTUPLE) && !bnxt_rfs_capable(bp)) features &= ~NETIF_F_NTUPLE; @@ -9796,12 +9797,14 @@ static netdev_features_t bnxt_fix_features(struct net_device *dev, /* Both CTAG and STAG VLAN accelaration on the RX side have to be * turned on or off together. */ - if ((features & (NETIF_F_HW_VLAN_CTAG_RX | NETIF_F_HW_VLAN_STAG_RX)) != - (NETIF_F_HW_VLAN_CTAG_RX | NETIF_F_HW_VLAN_STAG_RX)) { + vlan_features = features & (NETIF_F_HW_VLAN_CTAG_RX | + NETIF_F_HW_VLAN_STAG_RX); + if (vlan_features != (NETIF_F_HW_VLAN_CTAG_RX | + NETIF_F_HW_VLAN_STAG_RX)) { if (dev->features & NETIF_F_HW_VLAN_CTAG_RX) features &= ~(NETIF_F_HW_VLAN_CTAG_RX | NETIF_F_HW_VLAN_STAG_RX); - else + else if (vlan_features) features |= NETIF_F_HW_VLAN_CTAG_RX | NETIF_F_HW_VLAN_STAG_RX; }