i2c: mt7621: Add MediaTek MT7621/7628/7688 I2C driver
This patch adds a driver for the I2C controller found on the MediaTek MT7621/7628/7688 SoC's. The base version of this driver was done by Steven Liu (according to the copyright and MODULE_AUTHOR lines). It can be found in the OpenWRT repositories (v4.14 at the time I looked). The base driver had many issues, which are disccussed here: https://en.forum.labs.mediatek.com/t/openwrt-15-05-loads-non-working-i2c-kernel-module-for-mt7688/1286/3 >From this link an enhanced driver version (complete rewrite, mayor changes: support clock stretching, repeated start, ACK handling and unlimited message length) from Jan Breuer can be found here: https://gist.github.com/j123b567/9b555b635c2b4069d716b24198546954 This patch now adds this enhanced I2C driver to mainline. Changes by Stefan Roese for upstreaming: - Add devicetree bindings - checkpatch clean - Use module_platform_driver() - Minor cosmetic enhancements - Removed IO warpped functions - Use readl_relaxed_poll_timeout() and drop poll_down_timeout() - Removed superfluous barrier() in mtk_i2c_reset() - Use i2c_8bit_addr_from_msg() - Added I2C_FUNC_PROTOCOL_MANGLING - Removed adap->class = I2C_CLASS_HWMON | I2C_CLASS_SPD; Signed-off-by: Stefan Roese <sr@denx.de> Tested-by: René van Dorst <opensource@vdorst.com> Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
This commit is contained in:
Stefan Roese
Wolfram Sang
parent
71731e1b2d
commit
d04913ec5f
@ -9944,6 +9944,13 @@ L: linux-wireless@vger.kernel.org
|
||||
S: Maintained
|
||||
F: drivers/net/wireless/mediatek/mt7601u/
|
||||
|
||||
MEDIATEK MT7621/28/88 I2C DRIVER
|
||||
M: Stefan Roese <sr@denx.de>
|
||||
L: linux-i2c@vger.kernel.org
|
||||
S: Maintained
|
||||
F: drivers/i2c/busses/i2c-mt7621.c
|
||||
F: Documentation/devicetree/bindings/i2c/i2c-mt7621.txt
|
||||
|
||||
MEDIATEK NAND CONTROLLER DRIVER
|
||||
M: Xiaolei Li <xiaolei.li@mediatek.com>
|
||||
L: linux-mtd@lists.infradead.org
|
||||
|
||||
@ -747,6 +747,13 @@ config I2C_MT65XX
|
||||
If you want to use MediaTek(R) I2C interface, say Y or M here.
|
||||
If unsure, say N.
|
||||
|
||||
config I2C_MT7621
|
||||
tristate "MT7621/MT7628 I2C Controller"
|
||||
depends on (RALINK && (SOC_MT7620 || SOC_MT7621)) || COMPILE_TEST
|
||||
help
|
||||
Say Y here to include support for I2C controller in the
|
||||
MediaTek MT7621/MT7628 SoCs.
|
||||
|
||||
config I2C_MV64XXX
|
||||
tristate "Marvell mv64xxx I2C Controller"
|
||||
depends on MV64X60 || PLAT_ORION || ARCH_SUNXI || ARCH_MVEBU
|
||||
|
||||
@ -77,6 +77,7 @@ obj-$(CONFIG_I2C_LPC2K) += i2c-lpc2k.o
|
||||
obj-$(CONFIG_I2C_MESON) += i2c-meson.o
|
||||
obj-$(CONFIG_I2C_MPC) += i2c-mpc.o
|
||||
obj-$(CONFIG_I2C_MT65XX) += i2c-mt65xx.o
|
||||
obj-$(CONFIG_I2C_MT7621) += i2c-mt7621.o
|
||||
obj-$(CONFIG_I2C_MV64XXX) += i2c-mv64xxx.o
|
||||
obj-$(CONFIG_I2C_MXS) += i2c-mxs.o
|
||||
obj-$(CONFIG_I2C_NOMADIK) += i2c-nomadik.o
|
||||
|
||||
357
drivers/i2c/busses/i2c-mt7621.c
Normal file
357
drivers/i2c/busses/i2c-mt7621.c
Normal file
@ -0,0 +1,357 @@
|
||||
// SPDX-License-Identifier: GPL-2.0
|
||||
/*
|
||||
* drivers/i2c/busses/i2c-mt7621.c
|
||||
*
|
||||
* Copyright (C) 2013 Steven Liu <steven_liu@mediatek.com>
|
||||
* Copyright (C) 2016 Michael Lee <igvtee@gmail.com>
|
||||
* Copyright (C) 2018 Jan Breuer <jan.breuer@jaybee.cz>
|
||||
*
|
||||
* Improve driver for i2cdetect from i2c-tools to detect i2c devices on the bus.
|
||||
* (C) 2014 Sittisak <sittisaks@hotmail.com>
|
||||
*/
|
||||
|
||||
#include <linux/clk.h>
|
||||
#include <linux/delay.h>
|
||||
#include <linux/i2c.h>
|
||||
#include <linux/io.h>
|
||||
#include <linux/iopoll.h>
|
||||
#include <linux/module.h>
|
||||
#include <linux/of_platform.h>
|
||||
#include <linux/reset.h>
|
||||
|
||||
#define REG_SM0CFG2_REG 0x28
|
||||
#define REG_SM0CTL0_REG 0x40
|
||||
#define REG_SM0CTL1_REG 0x44
|
||||
#define REG_SM0D0_REG 0x50
|
||||
#define REG_SM0D1_REG 0x54
|
||||
#define REG_PINTEN_REG 0x5c
|
||||
#define REG_PINTST_REG 0x60
|
||||
#define REG_PINTCL_REG 0x64
|
||||
|
||||
/* REG_SM0CFG2_REG */
|
||||
#define SM0CFG2_IS_AUTOMODE BIT(0)
|
||||
|
||||
/* REG_SM0CTL0_REG */
|
||||
#define SM0CTL0_ODRAIN BIT(31)
|
||||
#define SM0CTL0_CLK_DIV_MASK (0x7ff << 16)
|
||||
#define SM0CTL0_CLK_DIV_MAX 0x7ff
|
||||
#define SM0CTL0_CS_STATUS BIT(4)
|
||||
#define SM0CTL0_SCL_STATE BIT(3)
|
||||
#define SM0CTL0_SDA_STATE BIT(2)
|
||||
#define SM0CTL0_EN BIT(1)
|
||||
#define SM0CTL0_SCL_STRETCH BIT(0)
|
||||
|
||||
/* REG_SM0CTL1_REG */
|
||||
#define SM0CTL1_ACK_MASK (0xff << 16)
|
||||
#define SM0CTL1_PGLEN_MASK (0x7 << 8)
|
||||
#define SM0CTL1_PGLEN(x) ((((x) - 1) << 8) & SM0CTL1_PGLEN_MASK)
|
||||
#define SM0CTL1_READ (5 << 4)
|
||||
#define SM0CTL1_READ_LAST (4 << 4)
|
||||
#define SM0CTL1_STOP (3 << 4)
|
||||
#define SM0CTL1_WRITE (2 << 4)
|
||||
#define SM0CTL1_START (1 << 4)
|
||||
#define SM0CTL1_MODE_MASK (0x7 << 4)
|
||||
#define SM0CTL1_TRI BIT(0)
|
||||
|
||||
/* timeout waiting for I2C devices to respond */
|
||||
#define TIMEOUT_MS 1000
|
||||
|
||||
struct mtk_i2c {
|
||||
void __iomem *base;
|
||||
struct device *dev;
|
||||
struct i2c_adapter adap;
|
||||
u32 bus_freq;
|
||||
u32 clk_div;
|
||||
u32 flags;
|
||||
struct clk *clk;
|
||||
};
|
||||
|
||||
static int mtk_i2c_wait_idle(struct mtk_i2c *i2c)
|
||||
{
|
||||
int ret;
|
||||
u32 val;
|
||||
|
||||
ret = readl_relaxed_poll_timeout(i2c->base + REG_SM0CTL1_REG,
|
||||
val, !(val & SM0CTL1_TRI),
|
||||
10, TIMEOUT_MS * 1000);
|
||||
if (ret)
|
||||
dev_dbg(i2c->dev, "idle err(%d)\n", ret);
|
||||
|
||||
return ret;
|
||||
}
|
||||
|
||||
static void mtk_i2c_reset(struct mtk_i2c *i2c)
|
||||
{
|
||||
int ret;
|
||||
|
||||
ret = device_reset(i2c->adap.dev.parent);
|
||||
if (ret)
|
||||
dev_err(i2c->dev, "I2C reset failed!\n");
|
||||
|
||||
/*
|
||||
* Don't set SM0CTL0_ODRAIN as its bit meaning is inverted. To
|
||||
* configure open-drain mode, this bit needs to be cleared.
|
||||
*/
|
||||
iowrite32(((i2c->clk_div << 16) & SM0CTL0_CLK_DIV_MASK) | SM0CTL0_EN |
|
||||
SM0CTL0_SCL_STRETCH, i2c->base + REG_SM0CTL0_REG);
|
||||
iowrite32(0, i2c->base + REG_SM0CFG2_REG);
|
||||
}
|
||||
|
||||
static void mtk_i2c_dump_reg(struct mtk_i2c *i2c)
|
||||
{
|
||||
dev_dbg(i2c->dev,
|
||||
"SM0CFG2 %08x, SM0CTL0 %08x, SM0CTL1 %08x, SM0D0 %08x, SM0D1 %08x\n",
|
||||
ioread32(i2c->base + REG_SM0CFG2_REG),
|
||||
ioread32(i2c->base + REG_SM0CTL0_REG),
|
||||
ioread32(i2c->base + REG_SM0CTL1_REG),
|
||||
ioread32(i2c->base + REG_SM0D0_REG),
|
||||
ioread32(i2c->base + REG_SM0D1_REG));
|
||||
}
|
||||
|
||||
static int mtk_i2c_check_ack(struct mtk_i2c *i2c, u32 expected)
|
||||
{
|
||||
u32 ack = readl_relaxed(i2c->base + REG_SM0CTL1_REG);
|
||||
u32 ack_expected = (expected << 16) & SM0CTL1_ACK_MASK;
|
||||
|
||||
return ((ack & ack_expected) == ack_expected) ? 0 : -ENXIO;
|
||||
}
|
||||
|
||||
static int mtk_i2c_master_start(struct mtk_i2c *i2c)
|
||||
{
|
||||
iowrite32(SM0CTL1_START | SM0CTL1_TRI, i2c->base + REG_SM0CTL1_REG);
|
||||
return mtk_i2c_wait_idle(i2c);
|
||||
}
|
||||
|
||||
static int mtk_i2c_master_stop(struct mtk_i2c *i2c)
|
||||
{
|
||||
iowrite32(SM0CTL1_STOP | SM0CTL1_TRI, i2c->base + REG_SM0CTL1_REG);
|
||||
return mtk_i2c_wait_idle(i2c);
|
||||
}
|
||||
|
||||
static int mtk_i2c_master_cmd(struct mtk_i2c *i2c, u32 cmd, int page_len)
|
||||
{
|
||||
iowrite32(cmd | SM0CTL1_TRI | SM0CTL1_PGLEN(page_len),
|
||||
i2c->base + REG_SM0CTL1_REG);
|
||||
return mtk_i2c_wait_idle(i2c);
|
||||
}
|
||||
|
||||
static int mtk_i2c_master_xfer(struct i2c_adapter *adap, struct i2c_msg *msgs,
|
||||
int num)
|
||||
{
|
||||
struct mtk_i2c *i2c;
|
||||
struct i2c_msg *pmsg;
|
||||
u16 addr;
|
||||
int i, j, ret, len, page_len;
|
||||
u32 cmd;
|
||||
u32 data[2];
|
||||
|
||||
i2c = i2c_get_adapdata(adap);
|
||||
|
||||
for (i = 0; i < num; i++) {
|
||||
pmsg = &msgs[i];
|
||||
|
||||
/* wait hardware idle */
|
||||
ret = mtk_i2c_wait_idle(i2c);
|
||||
if (ret)
|
||||
goto err_timeout;
|
||||
|
||||
/* start sequence */
|
||||
ret = mtk_i2c_master_start(i2c);
|
||||
if (ret)
|
||||
goto err_timeout;
|
||||
|
||||
/* write address */
|
||||
if (pmsg->flags & I2C_M_TEN) {
|
||||
/* 10 bits address */
|
||||
addr = 0xf0 | ((pmsg->addr >> 7) & 0x06);
|
||||
addr |= (pmsg->addr & 0xff) << 8;
|
||||
if (pmsg->flags & I2C_M_RD)
|
||||
addr |= 1;
|
||||
iowrite32(addr, i2c->base + REG_SM0D0_REG);
|
||||
ret = mtk_i2c_master_cmd(i2c, SM0CTL1_WRITE, 2);
|
||||
if (ret)
|
||||
goto err_timeout;
|
||||
} else {
|
||||
/* 7 bits address */
|
||||
addr = i2c_8bit_addr_from_msg(pmsg);
|
||||
iowrite32(addr, i2c->base + REG_SM0D0_REG);
|
||||
ret = mtk_i2c_master_cmd(i2c, SM0CTL1_WRITE, 1);
|
||||
if (ret)
|
||||
goto err_timeout;
|
||||
}
|
||||
|
||||
/* check address ACK */
|
||||
if (!(pmsg->flags & I2C_M_IGNORE_NAK)) {
|
||||
ret = mtk_i2c_check_ack(i2c, BIT(0));
|
||||
if (ret)
|
||||
goto err_ack;
|
||||
}
|
||||
|
||||
/* transfer data */
|
||||
for (len = pmsg->len, j = 0; len > 0; len -= 8, j += 8) {
|
||||
page_len = (len >= 8) ? 8 : len;
|
||||
|
||||
if (pmsg->flags & I2C_M_RD) {
|
||||
cmd = (len > 8) ?
|
||||
SM0CTL1_READ : SM0CTL1_READ_LAST;
|
||||
} else {
|
||||
memcpy(data, &pmsg->buf[j], page_len);
|
||||
iowrite32(data[0], i2c->base + REG_SM0D0_REG);
|
||||
iowrite32(data[1], i2c->base + REG_SM0D1_REG);
|
||||
cmd = SM0CTL1_WRITE;
|
||||
}
|
||||
|
||||
ret = mtk_i2c_master_cmd(i2c, cmd, page_len);
|
||||
if (ret)
|
||||
goto err_timeout;
|
||||
|
||||
if (pmsg->flags & I2C_M_RD) {
|
||||
data[0] = ioread32(i2c->base + REG_SM0D0_REG);
|
||||
data[1] = ioread32(i2c->base + REG_SM0D1_REG);
|
||||
memcpy(&pmsg->buf[j], data, page_len);
|
||||
} else {
|
||||
if (!(pmsg->flags & I2C_M_IGNORE_NAK)) {
|
||||
ret = mtk_i2c_check_ack(i2c,
|
||||
(1 << page_len)
|
||||
- 1);
|
||||
if (ret)
|
||||
goto err_ack;
|
||||
}
|
||||
}
|
||||
}
|
||||
}
|
||||
|
||||
ret = mtk_i2c_master_stop(i2c);
|
||||
if (ret)
|
||||
goto err_timeout;
|
||||
|
||||
/* the return value is number of executed messages */
|
||||
return i;
|
||||
|
||||
err_ack:
|
||||
ret = mtk_i2c_master_stop(i2c);
|
||||
if (ret)
|
||||
goto err_timeout;
|
||||
return -ENXIO;
|
||||
|
||||
err_timeout:
|
||||
mtk_i2c_dump_reg(i2c);
|
||||
mtk_i2c_reset(i2c);
|
||||
return ret;
|
||||
}
|
||||
|
||||
static u32 mtk_i2c_func(struct i2c_adapter *a)
|
||||
{
|
||||
return I2C_FUNC_I2C | I2C_FUNC_SMBUS_EMUL | I2C_FUNC_PROTOCOL_MANGLING;
|
||||
}
|
||||
|
||||
static const struct i2c_algorithm mtk_i2c_algo = {
|
||||
.master_xfer = mtk_i2c_master_xfer,
|
||||
.functionality = mtk_i2c_func,
|
||||
};
|
||||
|
||||
static const struct of_device_id i2c_mtk_dt_ids[] = {
|
||||
{ .compatible = "mediatek,mt7621-i2c" },
|
||||
{ /* sentinel */ }
|
||||
};
|
||||
|
||||
MODULE_DEVICE_TABLE(of, i2c_mtk_dt_ids);
|
||||
|
||||
static void mtk_i2c_init(struct mtk_i2c *i2c)
|
||||
{
|
||||
i2c->clk_div = clk_get_rate(i2c->clk) / i2c->bus_freq - 1;
|
||||
if (i2c->clk_div < 99)
|
||||
i2c->clk_div = 99;
|
||||
if (i2c->clk_div > SM0CTL0_CLK_DIV_MAX)
|
||||
i2c->clk_div = SM0CTL0_CLK_DIV_MAX;
|
||||
|
||||
mtk_i2c_reset(i2c);
|
||||
}
|
||||
|
||||
static int mtk_i2c_probe(struct platform_device *pdev)
|
||||
{
|
||||
struct resource *res;
|
||||
struct mtk_i2c *i2c;
|
||||
struct i2c_adapter *adap;
|
||||
int ret;
|
||||
|
||||
res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
|
||||
|
||||
i2c = devm_kzalloc(&pdev->dev, sizeof(struct mtk_i2c), GFP_KERNEL);
|
||||
if (!i2c)
|
||||
return -ENOMEM;
|
||||
|
||||
i2c->base = devm_ioremap_resource(&pdev->dev, res);
|
||||
if (IS_ERR(i2c->base))
|
||||
return PTR_ERR(i2c->base);
|
||||
|
||||
i2c->clk = devm_clk_get(&pdev->dev, NULL);
|
||||
if (IS_ERR(i2c->clk)) {
|
||||
dev_err(&pdev->dev, "no clock defined\n");
|
||||
return PTR_ERR(i2c->clk);
|
||||
}
|
||||
ret = clk_prepare_enable(i2c->clk);
|
||||
if (ret) {
|
||||
dev_err(&pdev->dev, "Unable to enable clock\n");
|
||||
return ret;
|
||||
}
|
||||
|
||||
i2c->dev = &pdev->dev;
|
||||
|
||||
if (of_property_read_u32(pdev->dev.of_node, "clock-frequency",
|
||||
&i2c->bus_freq))
|
||||
i2c->bus_freq = 100000;
|
||||
|
||||
if (i2c->bus_freq == 0) {
|
||||
dev_warn(i2c->dev, "clock-frequency 0 not supported\n");
|
||||
return -EINVAL;
|
||||
}
|
||||
|
||||
adap = &i2c->adap;
|
||||
adap->owner = THIS_MODULE;
|
||||
adap->algo = &mtk_i2c_algo;
|
||||
adap->retries = 3;
|
||||
adap->dev.parent = &pdev->dev;
|
||||
i2c_set_adapdata(adap, i2c);
|
||||
adap->dev.of_node = pdev->dev.of_node;
|
||||
strlcpy(adap->name, dev_name(&pdev->dev), sizeof(adap->name));
|
||||
|
||||
platform_set_drvdata(pdev, i2c);
|
||||
|
||||
mtk_i2c_init(i2c);
|
||||
|
||||
ret = i2c_add_adapter(adap);
|
||||
if (ret < 0)
|
||||
return ret;
|
||||
|
||||
dev_info(&pdev->dev, "clock %u kHz\n", i2c->bus_freq / 1000);
|
||||
|
||||
return ret;
|
||||
}
|
||||
|
||||
static int mtk_i2c_remove(struct platform_device *pdev)
|
||||
{
|
||||
struct mtk_i2c *i2c = platform_get_drvdata(pdev);
|
||||
|
||||
clk_disable_unprepare(i2c->clk);
|
||||
i2c_del_adapter(&i2c->adap);
|
||||
|
||||
return 0;
|
||||
}
|
||||
|
||||
static struct platform_driver mtk_i2c_driver = {
|
||||
.probe = mtk_i2c_probe,
|
||||
.remove = mtk_i2c_remove,
|
||||
.driver = {
|
||||
.owner = THIS_MODULE,
|
||||
.name = "i2c-mt7621",
|
||||
.of_match_table = i2c_mtk_dt_ids,
|
||||
},
|
||||
};
|
||||
|
||||
module_platform_driver(mtk_i2c_driver);
|
||||
|
||||
MODULE_AUTHOR("Steven Liu");
|
||||
MODULE_DESCRIPTION("MT7621 I2C host driver");
|
||||
MODULE_LICENSE("GPL v2");
|
||||
MODULE_ALIAS("platform:MT7621-I2C");
|
||||
Loading…
Reference in New Issue
Block a user