thermal: Add Intel PCH thermal driver
This change adds a thermal driver for Wildcat Point platform controller hub. This driver register PCH thermal sensor as a thermal zone and associate critical and hot trips if present. Signed-off-by: Tushar Dave <tushar.n.dave@intel.com> Reviewed-by: Pandruvada, Srinivas <srinivas.pandruvada@intel.com> Signed-off-by: Zhang Rui <rui.zhang@intel.com>
This commit is contained in:
Tushar Dave
Zhang Rui
parent
1f22dc4494
commit
d0a12625d2
@ -340,6 +340,14 @@ config ACPI_THERMAL_REL
|
||||
tristate
|
||||
depends on ACPI
|
||||
|
||||
config INTEL_PCH_THERMAL
|
||||
tristate "Intel PCH Thermal Reporting Driver"
|
||||
depends on X86 && PCI
|
||||
help
|
||||
Enable this to support thermal reporting on certain intel PCHs.
|
||||
Thermal reporting device will provide temperature reading,
|
||||
programmable trip points and other information.
|
||||
|
||||
menu "Texas Instruments thermal drivers"
|
||||
source "drivers/thermal/ti-soc-thermal/Kconfig"
|
||||
endmenu
|
||||
|
||||
@ -41,6 +41,7 @@ obj-$(CONFIG_INTEL_SOC_DTS_THERMAL) += intel_soc_dts_thermal.o
|
||||
obj-$(CONFIG_INTEL_QUARK_DTS_THERMAL) += intel_quark_dts_thermal.o
|
||||
obj-$(CONFIG_TI_SOC_THERMAL) += ti-soc-thermal/
|
||||
obj-$(CONFIG_INT340X_THERMAL) += int340x_thermal/
|
||||
obj-$(CONFIG_INTEL_PCH_THERMAL) += intel_pch_thermal.o
|
||||
obj-$(CONFIG_ST_THERMAL) += st/
|
||||
obj-$(CONFIG_TEGRA_SOCTHERM) += tegra_soctherm.o
|
||||
obj-$(CONFIG_HISI_THERMAL) += hisi_thermal.o
|
||||
|
||||
286
drivers/thermal/intel_pch_thermal.c
Normal file
286
drivers/thermal/intel_pch_thermal.c
Normal file
@ -0,0 +1,286 @@
|
||||
/* intel_pch_thermal.c - Intel PCH Thermal driver
|
||||
*
|
||||
* Copyright (c) 2015, Intel Corporation.
|
||||
*
|
||||
* Authors:
|
||||
* Tushar Dave <tushar.n.dave@intel.com>
|
||||
*
|
||||
* This program is free software; you can redistribute it and/or modify it
|
||||
* under the terms and conditions of the GNU General Public License,
|
||||
* version 2, as published by the Free Software Foundation.
|
||||
*
|
||||
* This program is distributed in the hope it will be useful, but WITHOUT
|
||||
* ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
|
||||
* FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
|
||||
* more details.
|
||||
*
|
||||
*/
|
||||
|
||||
#include <linux/module.h>
|
||||
#include <linux/types.h>
|
||||
#include <linux/init.h>
|
||||
#include <linux/pci.h>
|
||||
#include <linux/thermal.h>
|
||||
|
||||
/* Intel PCH thermal Device IDs */
|
||||
#define PCH_THERMAL_DID_WPT 0x9CA4 /* Wildcat Point */
|
||||
|
||||
/* Wildcat Point-LP PCH Thermal registers */
|
||||
#define WPT_TEMP 0x0000 /* Temperature */
|
||||
#define WPT_TSC 0x04 /* Thermal Sensor Control */
|
||||
#define WPT_TSS 0x06 /* Thermal Sensor Status */
|
||||
#define WPT_TSEL 0x08 /* Thermal Sensor Enable and Lock */
|
||||
#define WPT_TSREL 0x0A /* Thermal Sensor Report Enable and Lock */
|
||||
#define WPT_TSMIC 0x0C /* Thermal Sensor SMI Control */
|
||||
#define WPT_CTT 0x0010 /* Catastrophic Trip Point */
|
||||
#define WPT_TAHV 0x0014 /* Thermal Alert High Value */
|
||||
#define WPT_TALV 0x0018 /* Thermal Alert Low Value */
|
||||
#define WPT_TL 0x00000040 /* Throttle Value */
|
||||
#define WPT_PHL 0x0060 /* PCH Hot Level */
|
||||
#define WPT_PHLC 0x62 /* PHL Control */
|
||||
#define WPT_TAS 0x80 /* Thermal Alert Status */
|
||||
#define WPT_TSPIEN 0x82 /* PCI Interrupt Event Enables */
|
||||
#define WPT_TSGPEN 0x84 /* General Purpose Event Enables */
|
||||
|
||||
/* Wildcat Point-LP PCH Thermal Register bit definitions */
|
||||
#define WPT_TEMP_TSR 0x00ff /* Temp TS Reading */
|
||||
#define WPT_TSC_CPDE 0x01 /* Catastrophic Power-Down Enable */
|
||||
#define WPT_TSS_TSDSS 0x10 /* Thermal Sensor Dynamic Shutdown Status */
|
||||
#define WPT_TSS_GPES 0x08 /* GPE status */
|
||||
#define WPT_TSEL_ETS 0x01 /* Enable TS */
|
||||
#define WPT_TSEL_PLDB 0x80 /* TSEL Policy Lock-Down Bit */
|
||||
#define WPT_TL_TOL 0x000001FF /* T0 Level */
|
||||
#define WPT_TL_T1L 0x1ff00000 /* T1 Level */
|
||||
#define WPT_TL_TTEN 0x20000000 /* TT Enable */
|
||||
|
||||
static char driver_name[] = "Intel PCH thermal driver";
|
||||
|
||||
struct pch_thermal_device {
|
||||
void __iomem *hw_base;
|
||||
const struct pch_dev_ops *ops;
|
||||
struct pci_dev *pdev;
|
||||
struct thermal_zone_device *tzd;
|
||||
int crt_trip_id;
|
||||
unsigned long crt_temp;
|
||||
int hot_trip_id;
|
||||
unsigned long hot_temp;
|
||||
};
|
||||
|
||||
static int pch_wpt_init(struct pch_thermal_device *ptd, int *nr_trips)
|
||||
{
|
||||
u8 tsel;
|
||||
u16 trip_temp;
|
||||
|
||||
*nr_trips = 0;
|
||||
|
||||
/* Check if BIOS has already enabled thermal sensor */
|
||||
if (WPT_TSS_TSDSS & readb(ptd->hw_base + WPT_TSS))
|
||||
goto read_trips;
|
||||
|
||||
tsel = readb(ptd->hw_base + WPT_TSEL);
|
||||
/*
|
||||
* When TSEL's Policy Lock-Down bit is 1, TSEL become RO.
|
||||
* If so, thermal sensor cannot enable. Bail out.
|
||||
*/
|
||||
if (tsel & WPT_TSEL_PLDB) {
|
||||
dev_err(&ptd->pdev->dev, "Sensor can't be enabled\n");
|
||||
return -ENODEV;
|
||||
}
|
||||
|
||||
writeb(tsel|WPT_TSEL_ETS, ptd->hw_base + WPT_TSEL);
|
||||
if (!(WPT_TSS_TSDSS & readb(ptd->hw_base + WPT_TSS))) {
|
||||
dev_err(&ptd->pdev->dev, "Sensor can't be enabled\n");
|
||||
return -ENODEV;
|
||||
}
|
||||
|
||||
read_trips:
|
||||
ptd->crt_trip_id = -1;
|
||||
trip_temp = readw(ptd->hw_base + WPT_CTT);
|
||||
trip_temp &= 0x1FF;
|
||||
if (trip_temp) {
|
||||
/* Resolution of 1/2 degree C and an offset of -50C */
|
||||
ptd->crt_temp = trip_temp * 1000 / 2 - 50000;
|
||||
ptd->crt_trip_id = 0;
|
||||
++(*nr_trips);
|
||||
}
|
||||
|
||||
ptd->hot_trip_id = -1;
|
||||
trip_temp = readw(ptd->hw_base + WPT_PHL);
|
||||
trip_temp &= 0x1FF;
|
||||
if (trip_temp) {
|
||||
/* Resolution of 1/2 degree C and an offset of -50C */
|
||||
ptd->hot_temp = trip_temp * 1000 / 2 - 50000;
|
||||
ptd->hot_trip_id = *nr_trips;
|
||||
++(*nr_trips);
|
||||
}
|
||||
|
||||
return 0;
|
||||
}
|
||||
|
||||
static int pch_wpt_get_temp(struct pch_thermal_device *ptd,
|
||||
unsigned long *temp)
|
||||
{
|
||||
u8 wpt_temp;
|
||||
|
||||
wpt_temp = WPT_TEMP_TSR & readl(ptd->hw_base + WPT_TEMP);
|
||||
|
||||
/* Resolution of 1/2 degree C and an offset of -50C */
|
||||
*temp = (wpt_temp * 1000 / 2 - 50000);
|
||||
|
||||
return 0;
|
||||
}
|
||||
|
||||
struct pch_dev_ops {
|
||||
int (*hw_init)(struct pch_thermal_device *ptd, int *nr_trips);
|
||||
int (*get_temp)(struct pch_thermal_device *ptd, unsigned long *temp);
|
||||
};
|
||||
|
||||
|
||||
/* dev ops for Wildcat Point */
|
||||
static struct pch_dev_ops pch_dev_ops_wpt = {
|
||||
.hw_init = pch_wpt_init,
|
||||
.get_temp = pch_wpt_get_temp,
|
||||
};
|
||||
|
||||
static int pch_thermal_get_temp(struct thermal_zone_device *tzd,
|
||||
unsigned long *temp)
|
||||
{
|
||||
struct pch_thermal_device *ptd = tzd->devdata;
|
||||
|
||||
return ptd->ops->get_temp(ptd, temp);
|
||||
}
|
||||
|
||||
static int pch_get_trip_type(struct thermal_zone_device *tzd, int trip,
|
||||
enum thermal_trip_type *type)
|
||||
{
|
||||
struct pch_thermal_device *ptd = tzd->devdata;
|
||||
|
||||
if (ptd->crt_trip_id == trip)
|
||||
*type = THERMAL_TRIP_CRITICAL;
|
||||
else if (ptd->hot_trip_id == trip)
|
||||
*type = THERMAL_TRIP_HOT;
|
||||
else
|
||||
return -EINVAL;
|
||||
|
||||
return 0;
|
||||
}
|
||||
|
||||
static int pch_get_trip_temp(struct thermal_zone_device *tzd, int trip,
|
||||
unsigned long *temp)
|
||||
{
|
||||
struct pch_thermal_device *ptd = tzd->devdata;
|
||||
|
||||
if (ptd->crt_trip_id == trip)
|
||||
*temp = ptd->crt_temp;
|
||||
else if (ptd->hot_trip_id == trip)
|
||||
*temp = ptd->hot_temp;
|
||||
else
|
||||
return -EINVAL;
|
||||
|
||||
return 0;
|
||||
}
|
||||
|
||||
static struct thermal_zone_device_ops tzd_ops = {
|
||||
.get_temp = pch_thermal_get_temp,
|
||||
.get_trip_type = pch_get_trip_type,
|
||||
.get_trip_temp = pch_get_trip_temp,
|
||||
};
|
||||
|
||||
|
||||
static int intel_pch_thermal_probe(struct pci_dev *pdev,
|
||||
const struct pci_device_id *id)
|
||||
{
|
||||
struct pch_thermal_device *ptd;
|
||||
int err;
|
||||
int nr_trips;
|
||||
char *dev_name;
|
||||
|
||||
ptd = devm_kzalloc(&pdev->dev, sizeof(*ptd), GFP_KERNEL);
|
||||
if (!ptd)
|
||||
return -ENOMEM;
|
||||
|
||||
switch (pdev->device) {
|
||||
case PCH_THERMAL_DID_WPT:
|
||||
ptd->ops = &pch_dev_ops_wpt;
|
||||
dev_name = "pch_wildcat_point";
|
||||
break;
|
||||
default:
|
||||
dev_err(&pdev->dev, "unknown pch thermal device\n");
|
||||
return -ENODEV;
|
||||
}
|
||||
|
||||
pci_set_drvdata(pdev, ptd);
|
||||
ptd->pdev = pdev;
|
||||
|
||||
err = pci_enable_device(pdev);
|
||||
if (err) {
|
||||
dev_err(&pdev->dev, "failed to enable pci device\n");
|
||||
return err;
|
||||
}
|
||||
|
||||
err = pci_request_regions(pdev, driver_name);
|
||||
if (err) {
|
||||
dev_err(&pdev->dev, "failed to request pci region\n");
|
||||
goto error_disable;
|
||||
}
|
||||
|
||||
ptd->hw_base = pci_ioremap_bar(pdev, 0);
|
||||
if (!ptd->hw_base) {
|
||||
err = -ENOMEM;
|
||||
dev_err(&pdev->dev, "failed to map mem base\n");
|
||||
goto error_release;
|
||||
}
|
||||
|
||||
err = ptd->ops->hw_init(ptd, &nr_trips);
|
||||
if (err)
|
||||
goto error_cleanup;
|
||||
|
||||
ptd->tzd = thermal_zone_device_register(dev_name, nr_trips, 0, ptd,
|
||||
&tzd_ops, NULL, 0, 0);
|
||||
if (IS_ERR(ptd->tzd)) {
|
||||
dev_err(&pdev->dev, "Failed to register thermal zone %s\n",
|
||||
dev_name);
|
||||
err = PTR_ERR(ptd->tzd);
|
||||
goto error_cleanup;
|
||||
}
|
||||
|
||||
return 0;
|
||||
|
||||
error_cleanup:
|
||||
iounmap(ptd->hw_base);
|
||||
error_release:
|
||||
pci_release_regions(pdev);
|
||||
error_disable:
|
||||
pci_disable_device(pdev);
|
||||
dev_err(&pdev->dev, "pci device failed to probe\n");
|
||||
return err;
|
||||
}
|
||||
|
||||
static void intel_pch_thermal_remove(struct pci_dev *pdev)
|
||||
{
|
||||
struct pch_thermal_device *ptd = pci_get_drvdata(pdev);
|
||||
|
||||
thermal_zone_device_unregister(ptd->tzd);
|
||||
iounmap(ptd->hw_base);
|
||||
pci_set_drvdata(pdev, NULL);
|
||||
pci_release_region(pdev, 0);
|
||||
pci_disable_device(pdev);
|
||||
}
|
||||
|
||||
static struct pci_device_id intel_pch_thermal_id[] = {
|
||||
{ PCI_DEVICE(PCI_VENDOR_ID_INTEL, PCH_THERMAL_DID_WPT) },
|
||||
{ 0, },
|
||||
};
|
||||
MODULE_DEVICE_TABLE(pci, intel_pch_thermal_id);
|
||||
|
||||
static struct pci_driver intel_pch_thermal_driver = {
|
||||
.name = "intel_pch_thermal",
|
||||
.id_table = intel_pch_thermal_id,
|
||||
.probe = intel_pch_thermal_probe,
|
||||
.remove = intel_pch_thermal_remove,
|
||||
};
|
||||
|
||||
module_pci_driver(intel_pch_thermal_driver);
|
||||
|
||||
MODULE_LICENSE("GPL v2");
|
||||
MODULE_DESCRIPTION("Intel PCH Thermal driver");
|
||||
Loading…
Reference in New Issue
Block a user