arm64: dts: qcom: Add device tree for ASUS Vivobook S 15
ASUS Vivobook S 15 is a laptop based on the Qualcomm Snapdragon X Elite SoC (X1E78100). Add the device tree for the laptop with support for the following features: - CPU frequency scaling up to 3.4GHz - NVMe storage on PCIe 6a (capable of Gen4x4, currently limited to Gen4x2) - Keyboard and touchpad - WCN7850 Wi-Fi - Two Type-C ports on the left side (USB3 only in one orientation) - internal eDP display - ADSP and CDSP remoteprocs Further details could be found in the cover letter. Signed-off-by: Xilin Wu <wuxilin123@gmail.com> Link: https://lore.kernel.org/r/20240701-asus-vivobook-s15-v4-2-ce7933b4d4e5@gmail.com Signed-off-by: Bjorn Andersson <andersson@kernel.org>
This commit is contained in:
Xilin Wu
Bjorn Andersson
parent
ef7025079a
commit
d0e2f8f62d
@ -259,5 +259,6 @@ dtb-$(CONFIG_ARCH_QCOM) += sm8650-hdk-display-card.dtb
|
||||
dtb-$(CONFIG_ARCH_QCOM) += sm8650-hdk.dtb
|
||||
dtb-$(CONFIG_ARCH_QCOM) += sm8650-mtp.dtb
|
||||
dtb-$(CONFIG_ARCH_QCOM) += sm8650-qrd.dtb
|
||||
dtb-$(CONFIG_ARCH_QCOM) += x1e80100-asus-vivobook-s15.dtb
|
||||
dtb-$(CONFIG_ARCH_QCOM) += x1e80100-crd.dtb
|
||||
dtb-$(CONFIG_ARCH_QCOM) += x1e80100-qcp.dtb
|
||||
|
||||
616
arch/arm64/boot/dts/qcom/x1e80100-asus-vivobook-s15.dts
Normal file
616
arch/arm64/boot/dts/qcom/x1e80100-asus-vivobook-s15.dts
Normal file
@ -0,0 +1,616 @@
|
||||
// SPDX-License-Identifier: BSD-3-Clause
|
||||
/*
|
||||
* Copyright (c) 2023 Qualcomm Innovation Center, Inc. All rights reserved.
|
||||
* Copyright (c) 2024, Xilin Wu <wuxilin123@gmail.com>
|
||||
*/
|
||||
|
||||
/dts-v1/;
|
||||
|
||||
#include <dt-bindings/gpio/gpio.h>
|
||||
#include <dt-bindings/regulator/qcom,rpmh-regulator.h>
|
||||
|
||||
#include "x1e80100.dtsi"
|
||||
#include "x1e80100-pmics.dtsi"
|
||||
|
||||
/ {
|
||||
model = "ASUS Vivobook S 15";
|
||||
compatible = "asus,vivobook-s15", "qcom,x1e80100";
|
||||
chassis-type = "laptop";
|
||||
|
||||
pmic-glink {
|
||||
compatible = "qcom,x1e80100-pmic-glink",
|
||||
"qcom,sm8550-pmic-glink",
|
||||
"qcom,pmic-glink";
|
||||
orientation-gpios = <&tlmm 121 GPIO_ACTIVE_HIGH>,
|
||||
<&tlmm 123 GPIO_ACTIVE_HIGH>;
|
||||
#address-cells = <1>;
|
||||
#size-cells = <0>;
|
||||
|
||||
/* Left-side port, closer to the screen */
|
||||
connector@0 {
|
||||
compatible = "usb-c-connector";
|
||||
reg = <0>;
|
||||
power-role = "dual";
|
||||
data-role = "dual";
|
||||
|
||||
ports {
|
||||
#address-cells = <1>;
|
||||
#size-cells = <0>;
|
||||
|
||||
port@0 {
|
||||
reg = <0>;
|
||||
|
||||
pmic_glink_ss0_hs_in: endpoint {
|
||||
remote-endpoint = <&usb_1_ss0_dwc3_hs>;
|
||||
};
|
||||
};
|
||||
|
||||
port@1 {
|
||||
reg = <1>;
|
||||
|
||||
pmic_glink_ss0_ss_in: endpoint {
|
||||
remote-endpoint = <&usb_1_ss0_qmpphy_out>;
|
||||
};
|
||||
};
|
||||
};
|
||||
};
|
||||
|
||||
/* Left-side port, farther from the screen */
|
||||
connector@1 {
|
||||
compatible = "usb-c-connector";
|
||||
reg = <1>;
|
||||
power-role = "dual";
|
||||
data-role = "dual";
|
||||
|
||||
ports {
|
||||
#address-cells = <1>;
|
||||
#size-cells = <0>;
|
||||
|
||||
port@0 {
|
||||
reg = <0>;
|
||||
|
||||
pmic_glink_ss1_hs_in: endpoint {
|
||||
remote-endpoint = <&usb_1_ss1_dwc3_hs>;
|
||||
};
|
||||
};
|
||||
|
||||
port@1 {
|
||||
reg = <1>;
|
||||
|
||||
pmic_glink_ss1_ss_in: endpoint {
|
||||
remote-endpoint = <&usb_1_ss1_qmpphy_out>;
|
||||
};
|
||||
};
|
||||
};
|
||||
};
|
||||
};
|
||||
|
||||
reserved-memory {
|
||||
linux,cma {
|
||||
compatible = "shared-dma-pool";
|
||||
size = <0x0 0x8000000>;
|
||||
reusable;
|
||||
linux,cma-default;
|
||||
};
|
||||
};
|
||||
|
||||
vph_pwr: vph-pwr-regulator {
|
||||
compatible = "regulator-fixed";
|
||||
|
||||
regulator-name = "vph_pwr";
|
||||
regulator-min-microvolt = <3700000>;
|
||||
regulator-max-microvolt = <3700000>;
|
||||
|
||||
regulator-always-on;
|
||||
regulator-boot-on;
|
||||
};
|
||||
|
||||
vreg_edp_3p3: regulator-edp-3p3 {
|
||||
compatible = "regulator-fixed";
|
||||
|
||||
regulator-name = "VREG_EDP_3P3";
|
||||
regulator-min-microvolt = <3300000>;
|
||||
regulator-max-microvolt = <3300000>;
|
||||
|
||||
gpio = <&tlmm 70 GPIO_ACTIVE_HIGH>;
|
||||
enable-active-high;
|
||||
|
||||
pinctrl-0 = <&edp_reg_en>;
|
||||
pinctrl-names = "default";
|
||||
|
||||
regulator-always-on;
|
||||
regulator-boot-on;
|
||||
};
|
||||
|
||||
vreg_nvme: regulator-nvme {
|
||||
compatible = "regulator-fixed";
|
||||
|
||||
regulator-name = "VREG_NVME_3P3";
|
||||
regulator-min-microvolt = <3300000>;
|
||||
regulator-max-microvolt = <3300000>;
|
||||
|
||||
gpio = <&tlmm 18 GPIO_ACTIVE_HIGH>;
|
||||
enable-active-high;
|
||||
|
||||
pinctrl-0 = <&nvme_reg_en>;
|
||||
pinctrl-names = "default";
|
||||
};
|
||||
};
|
||||
|
||||
&apps_rsc {
|
||||
regulators-0 {
|
||||
compatible = "qcom,pm8550-rpmh-regulators";
|
||||
qcom,pmic-id = "b";
|
||||
|
||||
vdd-bob1-supply = <&vph_pwr>;
|
||||
vdd-bob2-supply = <&vph_pwr>;
|
||||
vdd-l1-l4-l10-supply = <&vreg_s4c_1p8>;
|
||||
vdd-l2-l13-l14-supply = <&vreg_bob1>;
|
||||
vdd-l5-l16-supply = <&vreg_bob1>;
|
||||
vdd-l6-l7-supply = <&vreg_bob2>;
|
||||
vdd-l8-l9-supply = <&vreg_bob1>;
|
||||
vdd-l12-supply = <&vreg_s5j_1p2>;
|
||||
vdd-l15-supply = <&vreg_s4c_1p8>;
|
||||
vdd-l17-supply = <&vreg_bob2>;
|
||||
|
||||
vreg_bob1: bob1 {
|
||||
regulator-name = "vreg_bob1";
|
||||
regulator-min-microvolt = <3008000>;
|
||||
regulator-max-microvolt = <3960000>;
|
||||
regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
|
||||
};
|
||||
|
||||
vreg_bob2: bob2 {
|
||||
regulator-name = "vreg_bob2";
|
||||
regulator-min-microvolt = <2504000>;
|
||||
regulator-max-microvolt = <3008000>;
|
||||
regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
|
||||
};
|
||||
|
||||
vreg_l2b_3p0: ldo2 {
|
||||
regulator-name = "vreg_l2b_3p0";
|
||||
regulator-min-microvolt = <3072000>;
|
||||
regulator-max-microvolt = <3100000>;
|
||||
regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
|
||||
};
|
||||
|
||||
vreg_l14b_3p0: ldo14 {
|
||||
regulator-name = "vreg_l14b_3p0";
|
||||
regulator-min-microvolt = <3072000>;
|
||||
regulator-max-microvolt = <3072000>;
|
||||
regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
|
||||
};
|
||||
};
|
||||
|
||||
regulators-1 {
|
||||
compatible = "qcom,pm8550ve-rpmh-regulators";
|
||||
qcom,pmic-id = "c";
|
||||
|
||||
vdd-l1-supply = <&vreg_s5j_1p2>;
|
||||
vdd-l2-supply = <&vreg_s1f_0p7>;
|
||||
vdd-l3-supply = <&vreg_s1f_0p7>;
|
||||
vdd-s4-supply = <&vph_pwr>;
|
||||
|
||||
vreg_s4c_1p8: smps4 {
|
||||
regulator-name = "vreg_s4c_1p8";
|
||||
regulator-min-microvolt = <1856000>;
|
||||
regulator-max-microvolt = <2000000>;
|
||||
regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
|
||||
};
|
||||
};
|
||||
|
||||
regulators-2 {
|
||||
compatible = "qcom,pmc8380-rpmh-regulators";
|
||||
qcom,pmic-id = "d";
|
||||
|
||||
vdd-l1-supply = <&vreg_s1f_0p7>;
|
||||
vdd-l2-supply = <&vreg_s1f_0p7>;
|
||||
vdd-l3-supply = <&vreg_s4c_1p8>;
|
||||
vdd-s1-supply = <&vph_pwr>;
|
||||
|
||||
vreg_l1d_0p8: ldo1 {
|
||||
regulator-name = "vreg_l1d_0p8";
|
||||
regulator-min-microvolt = <880000>;
|
||||
regulator-max-microvolt = <920000>;
|
||||
regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
|
||||
};
|
||||
|
||||
vreg_l2d_0p9: ldo2 {
|
||||
regulator-name = "vreg_l2d_0p9";
|
||||
regulator-min-microvolt = <912000>;
|
||||
regulator-max-microvolt = <920000>;
|
||||
regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
|
||||
};
|
||||
|
||||
vreg_l3d_1p8: ldo3 {
|
||||
regulator-name = "vreg_l3d_1p8";
|
||||
regulator-min-microvolt = <1800000>;
|
||||
regulator-max-microvolt = <1800000>;
|
||||
regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
|
||||
};
|
||||
};
|
||||
|
||||
regulators-3 {
|
||||
compatible = "qcom,pmc8380-rpmh-regulators";
|
||||
qcom,pmic-id = "e";
|
||||
|
||||
vdd-l2-supply = <&vreg_s1f_0p7>;
|
||||
vdd-l3-supply = <&vreg_s5j_1p2>;
|
||||
|
||||
vreg_l2e_0p8: ldo2 {
|
||||
regulator-name = "vreg_l2e_0p8";
|
||||
regulator-min-microvolt = <880000>;
|
||||
regulator-max-microvolt = <920000>;
|
||||
regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
|
||||
};
|
||||
|
||||
vreg_l3e_1p2: ldo3 {
|
||||
regulator-name = "vreg_l3e_1p2";
|
||||
regulator-min-microvolt = <1200000>;
|
||||
regulator-max-microvolt = <1200000>;
|
||||
regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
|
||||
};
|
||||
};
|
||||
|
||||
regulators-4 {
|
||||
compatible = "qcom,pmc8380-rpmh-regulators";
|
||||
qcom,pmic-id = "f";
|
||||
|
||||
vdd-l1-supply = <&vreg_s5j_1p2>;
|
||||
vdd-l2-supply = <&vreg_s5j_1p2>;
|
||||
vdd-l3-supply = <&vreg_s5j_1p2>;
|
||||
vdd-s1-supply = <&vph_pwr>;
|
||||
|
||||
vreg_s1f_0p7: smps1 {
|
||||
regulator-name = "vreg_s1f_0p7";
|
||||
regulator-min-microvolt = <700000>;
|
||||
regulator-max-microvolt = <1100000>;
|
||||
regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
|
||||
};
|
||||
};
|
||||
|
||||
regulators-6 {
|
||||
compatible = "qcom,pm8550ve-rpmh-regulators";
|
||||
qcom,pmic-id = "i";
|
||||
|
||||
vdd-l1-supply = <&vreg_s4c_1p8>;
|
||||
vdd-l2-supply = <&vreg_s5j_1p2>;
|
||||
vdd-l3-supply = <&vreg_s1f_0p7>;
|
||||
vdd-s1-supply = <&vph_pwr>;
|
||||
vdd-s2-supply = <&vph_pwr>;
|
||||
};
|
||||
|
||||
regulators-7 {
|
||||
compatible = "qcom,pm8550ve-rpmh-regulators";
|
||||
qcom,pmic-id = "j";
|
||||
|
||||
vdd-l1-supply = <&vreg_s1f_0p7>;
|
||||
vdd-l2-supply = <&vreg_s5j_1p2>;
|
||||
vdd-l3-supply = <&vreg_s1f_0p7>;
|
||||
vdd-s5-supply = <&vph_pwr>;
|
||||
|
||||
vreg_s5j_1p2: smps5 {
|
||||
regulator-name = "vreg_s5j_1p2";
|
||||
regulator-min-microvolt = <1256000>;
|
||||
regulator-max-microvolt = <1304000>;
|
||||
regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
|
||||
};
|
||||
|
||||
vreg_l1j_0p8: ldo1 {
|
||||
regulator-name = "vreg_l1j_0p8";
|
||||
regulator-min-microvolt = <880000>;
|
||||
regulator-max-microvolt = <920000>;
|
||||
regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
|
||||
};
|
||||
|
||||
vreg_l2j_1p2: ldo2 {
|
||||
regulator-name = "vreg_l2j_1p2";
|
||||
regulator-min-microvolt = <1200000>;
|
||||
regulator-max-microvolt = <1200000>;
|
||||
regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
|
||||
};
|
||||
|
||||
vreg_l3j_0p8: ldo3 {
|
||||
regulator-name = "vreg_l3j_0p8";
|
||||
regulator-min-microvolt = <880000>;
|
||||
regulator-max-microvolt = <920000>;
|
||||
regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
|
||||
};
|
||||
};
|
||||
};
|
||||
|
||||
&i2c0 {
|
||||
clock-frequency = <400000>;
|
||||
status = "okay";
|
||||
|
||||
touchpad@15 {
|
||||
compatible = "hid-over-i2c";
|
||||
reg = <0x15>;
|
||||
|
||||
hid-descr-addr = <0x1>;
|
||||
interrupts-extended = <&tlmm 3 IRQ_TYPE_LEVEL_LOW>;
|
||||
|
||||
pinctrl-0 = <&tpad_default>;
|
||||
pinctrl-names = "default";
|
||||
|
||||
wakeup-source;
|
||||
};
|
||||
};
|
||||
|
||||
&i2c1 {
|
||||
clock-frequency = <400000>;
|
||||
status = "okay";
|
||||
|
||||
/* PS8830 USB4 Retimer? @ 0x8 */
|
||||
};
|
||||
|
||||
&i2c3 {
|
||||
clock-frequency = <400000>;
|
||||
status = "okay";
|
||||
|
||||
/* PS8830 USB4 Retimer? @ 0x8 */
|
||||
};
|
||||
|
||||
&i2c5 {
|
||||
clock-frequency = <400000>;
|
||||
status = "okay";
|
||||
|
||||
keyboard@3a {
|
||||
compatible = "hid-over-i2c";
|
||||
reg = <0x3a>;
|
||||
|
||||
hid-descr-addr = <0x1>;
|
||||
interrupts-extended = <&tlmm 67 IRQ_TYPE_LEVEL_LOW>;
|
||||
|
||||
pinctrl-0 = <&kybd_default>;
|
||||
pinctrl-names = "default";
|
||||
|
||||
wakeup-source;
|
||||
};
|
||||
|
||||
/* EC? @ 0x5b, 0x76 */
|
||||
};
|
||||
|
||||
&i2c7 {
|
||||
clock-frequency = <400000>;
|
||||
status = "okay";
|
||||
|
||||
/* PS8830 USB4 Retimer? @ 0x8 */
|
||||
};
|
||||
|
||||
&mdss {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&mdss_dp3 {
|
||||
compatible = "qcom,x1e80100-dp";
|
||||
/delete-property/ #sound-dai-cells;
|
||||
|
||||
status = "okay";
|
||||
|
||||
aux-bus {
|
||||
panel {
|
||||
compatible = "edp-panel";
|
||||
power-supply = <&vreg_edp_3p3>;
|
||||
|
||||
port {
|
||||
edp_panel_in: endpoint {
|
||||
remote-endpoint = <&mdss_dp3_out>;
|
||||
};
|
||||
};
|
||||
};
|
||||
};
|
||||
|
||||
ports {
|
||||
port@1 {
|
||||
reg = <1>;
|
||||
|
||||
mdss_dp3_out: endpoint {
|
||||
data-lanes = <0 1 2 3>;
|
||||
link-frequencies = /bits/ 64 <1620000000 2700000000 5400000000 8100000000>;
|
||||
|
||||
remote-endpoint = <&edp_panel_in>;
|
||||
};
|
||||
};
|
||||
};
|
||||
};
|
||||
|
||||
&mdss_dp3_phy {
|
||||
vdda-phy-supply = <&vreg_l3j_0p8>;
|
||||
vdda-pll-supply = <&vreg_l2j_1p2>;
|
||||
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&pcie4 {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&pcie4_phy {
|
||||
vdda-phy-supply = <&vreg_l3j_0p8>;
|
||||
vdda-pll-supply = <&vreg_l3e_1p2>;
|
||||
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&pcie6a {
|
||||
perst-gpios = <&tlmm 152 GPIO_ACTIVE_LOW>;
|
||||
wake-gpios = <&tlmm 154 GPIO_ACTIVE_LOW>;
|
||||
|
||||
vddpe-3v3-supply = <&vreg_nvme>;
|
||||
|
||||
pinctrl-0 = <&pcie6a_default>;
|
||||
pinctrl-names = "default";
|
||||
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&pcie6a_phy {
|
||||
vdda-phy-supply = <&vreg_l1d_0p8>;
|
||||
vdda-pll-supply = <&vreg_l2j_1p2>;
|
||||
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&qupv3_0 {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&qupv3_1 {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&qupv3_2 {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&remoteproc_adsp {
|
||||
firmware-name = "qcom/x1e80100/ASUSTeK/vivobook-s15/qcadsp8380.mbn",
|
||||
"qcom/x1e80100/ASUSTeK/vivobook-s15/adsp_dtbs.elf";
|
||||
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&remoteproc_cdsp {
|
||||
firmware-name = "qcom/x1e80100/ASUSTeK/vivobook-s15/qccdsp8380.mbn",
|
||||
"qcom/x1e80100/ASUSTeK/vivobook-s15/cdsp_dtbs.elf";
|
||||
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&smb2360_0_eusb2_repeater {
|
||||
vdd18-supply = <&vreg_l3d_1p8>;
|
||||
vdd3-supply = <&vreg_l2b_3p0>;
|
||||
};
|
||||
|
||||
&smb2360_1_eusb2_repeater {
|
||||
vdd18-supply = <&vreg_l3d_1p8>;
|
||||
vdd3-supply = <&vreg_l14b_3p0>;
|
||||
};
|
||||
|
||||
&smb2360_2 {
|
||||
status = "disabled";
|
||||
};
|
||||
|
||||
&tlmm {
|
||||
gpio-reserved-ranges = <34 2>, /* Unused */
|
||||
<44 4>, /* SPI (TPM) */
|
||||
<238 1>; /* UFS Reset */
|
||||
|
||||
edp_reg_en: edp-reg-en-state {
|
||||
pins = "gpio70";
|
||||
function = "gpio";
|
||||
drive-strength = <16>;
|
||||
bias-disable;
|
||||
};
|
||||
|
||||
kybd_default: kybd-default-state {
|
||||
pins = "gpio67";
|
||||
function = "gpio";
|
||||
bias-disable;
|
||||
};
|
||||
|
||||
nvme_reg_en: nvme-reg-en-state {
|
||||
pins = "gpio18";
|
||||
function = "gpio";
|
||||
drive-strength = <2>;
|
||||
bias-disable;
|
||||
};
|
||||
|
||||
pcie6a_default: pcie2a-default-state {
|
||||
clkreq-n-pins {
|
||||
pins = "gpio153";
|
||||
function = "pcie6a_clk";
|
||||
drive-strength = <2>;
|
||||
bias-pull-up;
|
||||
};
|
||||
|
||||
perst-n-pins {
|
||||
pins = "gpio152";
|
||||
function = "gpio";
|
||||
drive-strength = <2>;
|
||||
bias-pull-down;
|
||||
};
|
||||
|
||||
wake-n-pins {
|
||||
pins = "gpio154";
|
||||
function = "gpio";
|
||||
drive-strength = <2>;
|
||||
bias-pull-up;
|
||||
};
|
||||
};
|
||||
|
||||
tpad_default: tpad-default-state {
|
||||
pins = "gpio3";
|
||||
function = "gpio";
|
||||
bias-disable;
|
||||
};
|
||||
};
|
||||
|
||||
&usb_1_ss0_hsphy {
|
||||
vdd-supply = <&vreg_l3j_0p8>;
|
||||
vdda12-supply = <&vreg_l2j_1p2>;
|
||||
|
||||
phys = <&smb2360_0_eusb2_repeater>;
|
||||
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&usb_1_ss0_qmpphy {
|
||||
vdda-phy-supply = <&vreg_l3e_1p2>;
|
||||
vdda-pll-supply = <&vreg_l1j_0p8>;
|
||||
|
||||
orientation-switch;
|
||||
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&usb_1_ss0 {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&usb_1_ss0_dwc3 {
|
||||
dr_mode = "host";
|
||||
};
|
||||
|
||||
&usb_1_ss0_dwc3_hs {
|
||||
remote-endpoint = <&pmic_glink_ss0_hs_in>;
|
||||
};
|
||||
|
||||
&usb_1_ss0_qmpphy_out {
|
||||
remote-endpoint = <&pmic_glink_ss0_ss_in>;
|
||||
};
|
||||
|
||||
&usb_1_ss1_hsphy {
|
||||
vdd-supply = <&vreg_l3j_0p8>;
|
||||
vdda12-supply = <&vreg_l2j_1p2>;
|
||||
|
||||
phys = <&smb2360_1_eusb2_repeater>;
|
||||
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&usb_1_ss1_qmpphy {
|
||||
vdda-phy-supply = <&vreg_l3e_1p2>;
|
||||
vdda-pll-supply = <&vreg_l2d_0p9>;
|
||||
|
||||
orientation-switch;
|
||||
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&usb_1_ss1 {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&usb_1_ss1_dwc3 {
|
||||
dr_mode = "host";
|
||||
};
|
||||
|
||||
&usb_1_ss1_dwc3_hs {
|
||||
remote-endpoint = <&pmic_glink_ss1_hs_in>;
|
||||
};
|
||||
|
||||
&usb_1_ss1_qmpphy_out {
|
||||
remote-endpoint = <&pmic_glink_ss1_ss_in>;
|
||||
};
|
||||
Loading…
x
Reference in New Issue
Block a user