iv/linux
1
0
Fork 0
Code Issues Pull Requests Actions Packages Projects Releases Wiki Activity

iio: adis: handle devices that cannot unmask the drdy pin

Browse Source 
[ Upstream commit 31fa357ac809affd9f9a7d0b5d1991951e16beec ]

Some devices can't mask/unmask the data ready pin and in those cases
each driver was just calling '{dis}enable_irq()' to control the trigger
state. This change, moves that handling into the library by introducing
a new boolean in the data structure that tells the library that the
device cannot unmask the pin.

On top of controlling the trigger state, we can also use this flag to
automatically request the IRQ with 'IRQF_NO_AUTOEN' in case it is set.
So far, all users of the library want to start operation with IRQs/DRDY
pin disabled so it should be fairly safe to do this inside the library.

Signed-off-by: Nuno Sá <nuno.sa@analog.com>
Link: https://lore.kernel.org/r/20210903141423.517028-3-nuno.sa@analog.com
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Stable-dep-of: 99c05e4283a1 ("iio: adis: add '__adis_enable_irq()' implementation")
Signed-off-by: Sasha Levin <sashal@kernel.org>
This commit is contained in:
Nuno Sá 2021-09-03 16:14:20 +02:00 committed by Greg Kroah-Hartman
parent 8eb2a679c6
commit d1b73eebc7
3 changed files with 20 additions and 1 deletions
Show Stats Download Patch File Download Diff File Expand all files Collapse all files

15
drivers/iio/imu/adis.c
View File

@ -290,6 +290,13 @@ int adis_enable_irq(struct adis *adis, bool enable)
if (adis->data->enable_irq) {
ret = adis->data->enable_irq(adis, enable);
goto out_unlock;
} else if (adis->data->unmasked_drdy) {
if (enable)
enable_irq(adis->spi->irq);
else
disable_irq(adis->spi->irq);
goto out_unlock;
}
ret = __adis_read_reg_16(adis, adis->data->msc_ctrl_reg, &msc);
@ -434,7 +441,13 @@ int __adis_initial_startup(struct adis *adis)
if (ret)
return ret;
adis_enable_irq(adis, false);
/*
* don't bother calling this if we can't unmask the IRQ as in this case
* the IRQ is most likely not yet requested and we will request it
* with 'IRQF_NO_AUTOEN' anyways.
*/
if (!adis->data->unmasked_drdy)
adis_enable_irq(adis, false);
if (!adis->data->prod_id_reg)
return 0;

4
drivers/iio/imu/adis_trigger.c
View File

@ -37,6 +37,10 @@ static void adis_trigger_setup(struct adis *adis)
static int adis_validate_irq_flag(struct adis *adis)
{
unsigned long direction = adis->irq_flag & IRQF_TRIGGER_MASK;
/* We cannot mask the interrupt so ensure it's not enabled at request */
if (adis->data->unmasked_drdy)
adis->irq_flag |= IRQF_NO_AUTOEN;
/*
* Typically this devices have data ready either on the rising edge or
* on the falling edge of the data ready pin. This checks enforces that

2
include/linux/iio/imu/adis.h
View File

@ -49,6 +49,7 @@ struct adis_timeout {
* @status_error_mask: Bitmask of errors supported by the device
* @timeouts: Chip specific delays
* @enable_irq: Hook for ADIS devices that have a special IRQ enable/disable
* @unmasked_drdy: True for devices that cannot mask/unmask the data ready pin
* @has_paging: True if ADIS device has paged registers
* @burst_reg_cmd: Register command that triggers burst
* @burst_len: Burst size in the SPI RX buffer. If @burst_max_len is defined,
@ -77,6 +78,7 @@ struct adis_data {
unsigned int status_error_mask;
int (*enable_irq)(struct adis *adis, bool enable);
bool unmasked_drdy;
bool has_paging;