iv/linux
1
0
Fork 0
Code Issues Pull Requests Actions Packages Projects Releases Wiki Activity

input: TSC: ti_tscadc: Add Step configuration as platform data

Browse Source 
There are 16 programmable Step Configuration
registers which are used by the sequencer.
Program the Steps in order to configure a channel
input to be sampled. If the same step is applied
several times, the coordinate values read are more
accurate.
Hence we provide the user an option of how many steps
should be configured.

For ex: If this value is assigned as 4, This means that
4 steps are applied to read x co-ordinate and 4 steps to read
y co-ordinate. Furtheron the interrupt handler already
holds code to use delta filter and report the best value
out of these values to the input sub-system.

Signed-off-by: Patil, Rachna <rachna@ti.com>
Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
This commit is contained in:
Patil, Rachna 2012-10-16 12:55:39 +05:30 committed by Samuel Ortiz
parent 33f5cc605d
commit d1fb57435c
2 changed files with 19 additions and 12 deletions
Show Stats Download Patch File Download Diff File Expand all files Collapse all files

25
drivers/input/touchscreen/ti_tscadc.c
View File

@ -41,10 +41,6 @@
#define REG_CHARGEDELAY 0x060
#define REG_STEPCONFIG(n) (0x64 + ((n - 1) * 8))
#define REG_STEPDELAY(n) (0x68 + ((n - 1) * 8))
#define REG_STEPCONFIG13 0x0C4
#define REG_STEPDELAY13 0x0C8
#define REG_STEPCONFIG14 0x0CC
#define REG_STEPDELAY14 0x0D0
#define REG_FIFO0CNT 0xE4
#define REG_FIFO1THR 0xF4
#define REG_FIFO0 0x100
@ -134,6 +130,7 @@ struct tscadc {
unsigned int wires;
unsigned int x_plate_resistance;
bool pen_down;
int steps_to_configure;
};
static unsigned int tscadc_readl(struct tscadc *ts, unsigned int reg)
@ -150,9 +147,10 @@ static void tscadc_writel(struct tscadc *tsc, unsigned int reg,
static void tscadc_step_config(struct tscadc *ts_dev)
{
unsigned int config;
int i;
int i, total_steps;
/* Configure the Step registers */
total_steps = 2 * ts_dev->steps_to_configure;
config = STEPCONFIG_MODE_HWSYNC |
STEPCONFIG_AVG_16 | STEPCONFIG_XPP;
@ -170,7 +168,7 @@ static void tscadc_step_config(struct tscadc *ts_dev)
break;
}
for (i = 1; i < 7; i++) {
for (i = 1; i <= ts_dev->steps_to_configure; i++) {
tscadc_writel(ts_dev, REG_STEPCONFIG(i), config);
tscadc_writel(ts_dev, REG_STEPDELAY(i), STEPCONFIG_OPENDLY);
}
@ -192,7 +190,7 @@ static void tscadc_step_config(struct tscadc *ts_dev)
break;
}
for (i = 7; i < 13; i++) {
for (i = (ts_dev->steps_to_configure + 1); i <= total_steps; i++) {
tscadc_writel(ts_dev, REG_STEPCONFIG(i), config);
tscadc_writel(ts_dev, REG_STEPDELAY(i), STEPCONFIG_OPENDLY);
}
@ -211,12 +209,14 @@ static void tscadc_step_config(struct tscadc *ts_dev)
config = STEPCONFIG_MODE_HWSYNC |
STEPCONFIG_AVG_16 | STEPCONFIG_YPP |
STEPCONFIG_XNN | STEPCONFIG_INM_ADCREFM;
tscadc_writel(ts_dev, REG_STEPCONFIG13, config);
tscadc_writel(ts_dev, REG_STEPDELAY13, STEPCONFIG_OPENDLY);
tscadc_writel(ts_dev, REG_STEPCONFIG(total_steps + 1), config);
tscadc_writel(ts_dev, REG_STEPDELAY(total_steps + 1),
STEPCONFIG_OPENDLY);
config |= STEPCONFIG_INP_AN3 | STEPCONFIG_FIFO1;
tscadc_writel(ts_dev, REG_STEPCONFIG14, config);
tscadc_writel(ts_dev, REG_STEPDELAY14, STEPCONFIG_OPENDLY);
tscadc_writel(ts_dev, REG_STEPCONFIG(total_steps + 2), config);
tscadc_writel(ts_dev, REG_STEPDELAY(total_steps + 2),
STEPCONFIG_OPENDLY);
tscadc_writel(ts_dev, REG_SE, STPENB_STEPENB);
}
@ -379,6 +379,7 @@ static int __devinit tscadc_probe(struct platform_device *pdev)
ts_dev->irq = irq;
ts_dev->wires = pdata->wires;
ts_dev->x_plate_resistance = pdata->x_plate_resistance;
ts_dev->steps_to_configure = pdata->steps_to_configure;
res = request_mem_region(res->start, resource_size(res), pdev->name);
if (!res) {
@ -447,7 +448,7 @@ static int __devinit tscadc_probe(struct platform_device *pdev)
tscadc_idle_config(ts_dev);
tscadc_writel(ts_dev, REG_IRQENABLE, IRQENB_FIFO1THRES);
tscadc_step_config(ts_dev);
tscadc_writel(ts_dev, REG_FIFO1THR, 6);
tscadc_writel(ts_dev, REG_FIFO1THR, ts_dev->steps_to_configure);
ctrl |= CNTRLREG_TSCSSENB;
tscadc_writel(ts_dev, REG_CTRL, ctrl);

6
include/linux/input/ti_tscadc.h
View File

@ -7,11 +7,17 @@
* i.e. 4/5/8 wire touchscreen support
* on the platform.
* @x_plate_resistance: X plate resistance.
* @steps_to_configure: The sequencer supports a total of
* 16 programmable steps.
* A step configured to read a single
* co-ordinate value, can be applied
* more number of times for better results.
*/
struct tsc_data {
int wires;
int x_plate_resistance;
int steps_to_configure;
};
#endif