diff --git a/Documentation/DocBook/device-drivers.tmpl b/Documentation/DocBook/device-drivers.tmpl index a20a45b45c30..e9f77f2fe27b 100644 --- a/Documentation/DocBook/device-drivers.tmpl +++ b/Documentation/DocBook/device-drivers.tmpl @@ -219,64 +219,6 @@ X!Isound/sound_firmware.c --> - - Media Devices - - Video2Linux devices -!Iinclude/media/tuner.h -!Iinclude/media/tuner-types.h -!Iinclude/media/tveeprom.h -!Iinclude/media/v4l2-async.h -!Iinclude/media/v4l2-ctrls.h -!Iinclude/media/v4l2-dv-timings.h -!Iinclude/media/v4l2-event.h -!Iinclude/media/v4l2-flash-led-class.h -!Iinclude/media/v4l2-mc.h -!Iinclude/media/v4l2-mediabus.h -!Iinclude/media/v4l2-mem2mem.h -!Iinclude/media/v4l2-of.h -!Iinclude/media/v4l2-rect.h -!Iinclude/media/v4l2-subdev.h -!Iinclude/media/videobuf2-core.h -!Iinclude/media/videobuf2-v4l2.h -!Iinclude/media/videobuf2-memops.h - - Digital TV (DVB) devices - Digital TV Common functions -!Idrivers/media/dvb-core/dvb_math.h -!Idrivers/media/dvb-core/dvb_ringbuffer.h -!Idrivers/media/dvb-core/dvbdev.h - - Digital TV Frontend kABI -!Pdrivers/media/dvb-core/dvb_frontend.h Digital TV Frontend -!Idrivers/media/dvb-core/dvb_frontend.h - - Digital TV Demux kABI -!Pdrivers/media/dvb-core/demux.h Digital TV Demux - Demux Callback API -!Pdrivers/media/dvb-core/demux.h Demux Callback - -!Idrivers/media/dvb-core/demux.h - - Digital TV Conditional Access kABI -!Idrivers/media/dvb-core/dvb_ca_en50221.h - - - Remote Controller devices -!Iinclude/media/rc-core.h -!Iinclude/media/lirc_dev.h - - Media Controller devices -!Pinclude/media/media-device.h Media Controller -!Iinclude/media/media-device.h -!Iinclude/media/media-devnode.h -!Iinclude/media/media-entity.h - - Consumer Electronics Control devices -!Iinclude/media/cec-edid.h - - - 16x50 UART Driver diff --git a/Documentation/index.rst b/Documentation/index.rst index ad07716c73f4..a5a100d43f4f 100644 --- a/Documentation/index.rst +++ b/Documentation/index.rst @@ -15,6 +15,7 @@ Contents: kernel-documentation media/media_uapi + media/media_drivers Indices and tables ================== diff --git a/Documentation/media/media_drivers.rst b/Documentation/media/media_drivers.rst new file mode 100644 index 000000000000..722170cb7f40 --- /dev/null +++ b/Documentation/media/media_drivers.rst @@ -0,0 +1,414 @@ +========== +Media core +========== + +Video2Linux devices +------------------- + +.. kernel-doc:: include/media/tuner.h + +.. kernel-doc:: include/media/tuner-types.h + +.. kernel-doc:: include/media/tveeprom.h + +.. kernel-doc:: include/media/v4l2-async.h + +.. kernel-doc:: include/media/v4l2-ctrls.h + +.. kernel-doc:: include/media/v4l2-dv-timings.h + +.. kernel-doc:: include/media/v4l2-event.h + +.. kernel-doc:: include/media/v4l2-flash-led-class.h + +.. kernel-doc:: include/media/v4l2-mc.h + +.. kernel-doc:: include/media/v4l2-mediabus.h + +.. kernel-doc:: include/media/v4l2-mem2mem.h + +.. kernel-doc:: include/media/v4l2-of.h + +.. kernel-doc:: include/media/v4l2-rect.h + +.. kernel-doc:: include/media/v4l2-subdev.h + +.. kernel-doc:: include/media/videobuf2-core.h + +.. kernel-doc:: include/media/videobuf2-v4l2.h + +.. kernel-doc:: include/media/videobuf2-memops.h + + +Digital TV (DVB) devices +------------------------ + +Digital TV Common functions +--------------------------- + +.. kernel-doc:: drivers/media/dvb-core/dvb_math.h + +.. kernel-doc:: drivers/media/dvb-core/dvb_ringbuffer.h + +.. kernel-doc:: drivers/media/dvb-core/dvbdev.h + + +Digital TV Frontend kABI +------------------------ + +Digital TV Frontend +~~~~~~~~~~~~~~~~~~~ + +The Digital TV Frontend kABI defines a driver-internal interface for +registering low-level, hardware specific driver to a hardware independent +frontend layer. It is only of interest for Digital TV device driver writers. +The header file for this API is named dvb_frontend.h and located in +drivers/media/dvb-core. + +Before using the Digital TV frontend core, the bridge driver should attach +the frontend demod, tuner and SEC devices and call dvb_register_frontend(), +in order to register the new frontend at the subsystem. At device +detach/removal, the bridge driver should call dvb_unregister_frontend() to +remove the frontend from the core and then dvb_frontend_detach() to free the +memory allocated by the frontend drivers. + +The drivers should also call dvb_frontend_suspend() as part of their +handler for the &device_driver.suspend(), and dvb_frontend_resume() as +part of their handler for &device_driver.resume(). + +few other optional functions are provided to handle some special cases. + +.. kernel-doc:: drivers/media/dvb-core/dvb_frontend.h + + +Digital TV Demux kABI +--------------------- + +Digital TV Demux +~~~~~~~~~~~~~~~~ + +The Kernel Digital TV Demux kABI defines a driver-internal interface for +registering low-level, hardware specific driver to a hardware independent +demux layer. It is only of interest for Digital TV device driver writers. +The header file for this kABI is named demux.h and located in +drivers/media/dvb-core. + +The demux kABI should be implemented for each demux in the system. It is +used to select the TS source of a demux and to manage the demux resources. +When the demux client allocates a resource via the demux kABI, it receives +a pointer to the kABI of that resource. + +Each demux receives its TS input from a DVB front-end or from memory, as +set via this demux kABI. In a system with more than one front-end, the kABI +can be used to select one of the DVB front-ends as a TS source for a demux, +unless this is fixed in the HW platform. + +The demux kABI only controls front-ends regarding to their connections with +demuxes; the kABI used to set the other front-end parameters, such as +tuning, are devined via the Digital TV Frontend kABI. + +The functions that implement the abstract interface demux should be defined +static or module private and registered to the Demux core for external +access. It is not necessary to implement every function in the struct +&dmx_demux. For example, a demux interface might support Section filtering, +but not PES filtering. The kABI client is expected to check the value of any +function pointer before calling the function: the value of NULL means +that the function is not available. + +Whenever the functions of the demux API modify shared data, the +possibilities of lost update and race condition problems should be +addressed, e.g. by protecting parts of code with mutexes. + +Note that functions called from a bottom half context must not sleep. +Even a simple memory allocation without using %GFP_ATOMIC can result in a +kernel thread being put to sleep if swapping is needed. For example, the +Linux Kernel calls the functions of a network device interface from a +bottom half context. Thus, if a demux kABI function is called from network +device code, the function must not sleep. + + + +Demux Callback API +------------------ + +Demux Callback +~~~~~~~~~~~~~~ + +This kernel-space API comprises the callback functions that deliver filtered +data to the demux client. Unlike the other DVB kABIs, these functions are +provided by the client and called from the demux code. + +The function pointers of this abstract interface are not packed into a +structure as in the other demux APIs, because the callback functions are +registered and used independent of each other. As an example, it is possible +for the API client to provide several callback functions for receiving TS +packets and no callbacks for PES packets or sections. + +The functions that implement the callback API need not be re-entrant: when +a demux driver calls one of these functions, the driver is not allowed to +call the function again before the original call returns. If a callback is +triggered by a hardware interrupt, it is recommended to use the Linux +bottom half mechanism or start a tasklet instead of making the callback +function call directly from a hardware interrupt. + +This mechanism is implemented by dmx_ts_cb() and dmx_section_cb() +callbacks. + + +.. kernel-doc:: drivers/media/dvb-core/demux.h + + +Digital TV Conditional Access kABI +---------------------------------- + +.. kernel-doc:: drivers/media/dvb-core/dvb_ca_en50221.h + + +Remote Controller devices +------------------------- + +.. kernel-doc:: include/media/rc-core.h + +.. kernel-doc:: include/media/lirc_dev.h + + +Media Controller devices +------------------------ + +Media Controller +~~~~~~~~~~~~~~~~ + + +The media controller userspace API is documented in DocBook format in +Documentation/DocBook/media/v4l/media-controller.xml. This document focus +on the kernel-side implementation of the media framework. + +* Abstract media device model: + +Discovering a device internal topology, and configuring it at runtime, is one +of the goals of the media framework. To achieve this, hardware devices are +modelled as an oriented graph of building blocks called entities connected +through pads. + +An entity is a basic media hardware building block. It can correspond to +a large variety of logical blocks such as physical hardware devices +(CMOS sensor for instance), logical hardware devices (a building block +in a System-on-Chip image processing pipeline), DMA channels or physical +connectors. + +A pad is a connection endpoint through which an entity can interact with +other entities. Data (not restricted to video) produced by an entity +flows from the entity's output to one or more entity inputs. Pads should +not be confused with physical pins at chip boundaries. + +A link is a point-to-point oriented connection between two pads, either +on the same entity or on different entities. Data flows from a source +pad to a sink pad. + + +* Media device: + +A media device is represented by a struct &media_device instance, defined in +include/media/media-device.h. Allocation of the structure is handled by the +media device driver, usually by embedding the &media_device instance in a +larger driver-specific structure. + +Drivers register media device instances by calling +__media_device_register() via the macro media_device_register() +and unregistered by calling +media_device_unregister(). + +* Entities, pads and links: + +- Entities + +Entities are represented by a struct &media_entity instance, defined in +include/media/media-entity.h. The structure is usually embedded into a +higher-level structure, such as a v4l2_subdev or video_device instance, +although drivers can allocate entities directly. + +Drivers initialize entity pads by calling +media_entity_pads_init(). + +Drivers register entities with a media device by calling +media_device_register_entity() +and unregistred by calling +media_device_unregister_entity(). + +- Interfaces + +Interfaces are represented by a struct &media_interface instance, defined in +include/media/media-entity.h. Currently, only one type of interface is +defined: a device node. Such interfaces are represented by a struct +&media_intf_devnode. + +Drivers initialize and create device node interfaces by calling +media_devnode_create() +and remove them by calling: +media_devnode_remove(). + +- Pads + +Pads are represented by a struct &media_pad instance, defined in +include/media/media-entity.h. Each entity stores its pads in a pads array +managed by the entity driver. Drivers usually embed the array in a +driver-specific structure. + +Pads are identified by their entity and their 0-based index in the pads +array. +Both information are stored in the &media_pad structure, making the +&media_pad pointer the canonical way to store and pass link references. + +Pads have flags that describe the pad capabilities and state. + +%MEDIA_PAD_FL_SINK indicates that the pad supports sinking data. +%MEDIA_PAD_FL_SOURCE indicates that the pad supports sourcing data. + +NOTE: One and only one of %MEDIA_PAD_FL_SINK and %MEDIA_PAD_FL_SOURCE must +be set for each pad. + +- Links + +Links are represented by a struct &media_link instance, defined in +include/media/media-entity.h. There are two types of links: + +1. pad to pad links: + +Associate two entities via their PADs. Each entity has a list that points +to all links originating at or targeting any of its pads. +A given link is thus stored twice, once in the source entity and once in +the target entity. + +Drivers create pad to pad links by calling: +media_create_pad_link() and remove with media_entity_remove_links(). + +2. interface to entity links: + +Associate one interface to a Link. + +Drivers create interface to entity links by calling: +media_create_intf_link() and remove with media_remove_intf_links(). + +NOTE: + +Links can only be created after having both ends already created. + +Links have flags that describe the link capabilities and state. The +valid values are described at media_create_pad_link() and +media_create_intf_link(). + +Graph traversal: + +The media framework provides APIs to iterate over entities in a graph. + +To iterate over all entities belonging to a media device, drivers can use +the media_device_for_each_entity macro, defined in +include/media/media-device.h. + +struct media_entity *entity; + +media_device_for_each_entity(entity, mdev) { +// entity will point to each entity in turn +... +} + +Drivers might also need to iterate over all entities in a graph that can be +reached only through enabled links starting at a given entity. The media +framework provides a depth-first graph traversal API for that purpose. + +Note that graphs with cycles (whether directed or undirected) are *NOT* +supported by the graph traversal API. To prevent infinite loops, the graph +traversal code limits the maximum depth to MEDIA_ENTITY_ENUM_MAX_DEPTH, +currently defined as 16. + +Drivers initiate a graph traversal by calling +media_entity_graph_walk_start() + +The graph structure, provided by the caller, is initialized to start graph +traversal at the given entity. + +Drivers can then retrieve the next entity by calling +media_entity_graph_walk_next() + +When the graph traversal is complete the function will return NULL. + +Graph traversal can be interrupted at any moment. No cleanup function call +is required and the graph structure can be freed normally. + +Helper functions can be used to find a link between two given pads, or a pad +connected to another pad through an enabled link +media_entity_find_link() and media_entity_remote_pad() + +Use count and power handling: + +Due to the wide differences between drivers regarding power management +needs, the media controller does not implement power management. However, +the &media_entity structure includes a use_count field that media drivers +can use to track the number of users of every entity for power management +needs. + +The &media_entity.@use_count field is owned by media drivers and must not be +touched by entity drivers. Access to the field must be protected by the +&media_device.@graph_mutex lock. + +Links setup: + +Link properties can be modified at runtime by calling +media_entity_setup_link() + +Pipelines and media streams: + +When starting streaming, drivers must notify all entities in the pipeline to +prevent link states from being modified during streaming by calling +media_entity_pipeline_start(). + +The function will mark all entities connected to the given entity through +enabled links, either directly or indirectly, as streaming. + +The &media_pipeline instance pointed to by the pipe argument will be stored +in every entity in the pipeline. Drivers should embed the &media_pipeline +structure in higher-level pipeline structures and can then access the +pipeline through the &media_entity pipe field. + +Calls to media_entity_pipeline_start() can be nested. The pipeline pointer +must be identical for all nested calls to the function. + +media_entity_pipeline_start() may return an error. In that case, it will +clean up any of the changes it did by itself. + +When stopping the stream, drivers must notify the entities with +media_entity_pipeline_stop(). + +If multiple calls to media_entity_pipeline_start() have been made the same +number of media_entity_pipeline_stop() calls are required to stop streaming. +The &media_entity pipe field is reset to NULL on the last nested stop call. + +Link configuration will fail with -%EBUSY by default if either end of the +link is a streaming entity. Links that can be modified while streaming must +be marked with the %MEDIA_LNK_FL_DYNAMIC flag. + +If other operations need to be disallowed on streaming entities (such as +changing entities configuration parameters) drivers can explicitly check the +media_entity stream_count field to find out if an entity is streaming. This +operation must be done with the media_device graph_mutex held. + +Link validation: + +Link validation is performed by media_entity_pipeline_start() for any +entity which has sink pads in the pipeline. The +&media_entity.@link_validate() callback is used for that purpose. In +@link_validate() callback, entity driver should check that the properties of +the source pad of the connected entity and its own sink pad match. It is up +to the type of the entity (and in the end, the properties of the hardware) +what matching actually means. + +Subsystems should facilitate link validation by providing subsystem specific +helper functions to provide easy access for commonly needed information, and +in the end provide a way to use driver-specific callbacks. + +.. kernel-doc:: include/media/media-device.h + +.. kernel-doc:: include/media/media-devnode.h + +.. kernel-doc:: include/media/media-entity.h + diff --git a/drivers/media/dvb-core/demux.h b/drivers/media/dvb-core/demux.h index 6d3b95b8939d..e8f04f8872f8 100644 --- a/drivers/media/dvb-core/demux.h +++ b/drivers/media/dvb-core/demux.h @@ -1,6 +1,10 @@ /* * demux.h * + * The Kernel Digital TV Demux kABI defines a driver-internal interface for + * registering low-level, hardware specific driver to a hardware independent + * demux layer. + * * Copyright (c) 2002 Convergence GmbH * * based on code: @@ -32,49 +36,6 @@ #include #include -/** - * DOC: Digital TV Demux - * - * The Kernel Digital TV Demux kABI defines a driver-internal interface for - * registering low-level, hardware specific driver to a hardware independent - * demux layer. It is only of interest for Digital TV device driver writers. - * The header file for this kABI is named demux.h and located in - * drivers/media/dvb-core. - * - * The demux kABI should be implemented for each demux in the system. It is - * used to select the TS source of a demux and to manage the demux resources. - * When the demux client allocates a resource via the demux kABI, it receives - * a pointer to the kABI of that resource. - * - * Each demux receives its TS input from a DVB front-end or from memory, as - * set via this demux kABI. In a system with more than one front-end, the kABI - * can be used to select one of the DVB front-ends as a TS source for a demux, - * unless this is fixed in the HW platform. - * - * The demux kABI only controls front-ends regarding to their connections with - * demuxes; the kABI used to set the other front-end parameters, such as - * tuning, are devined via the Digital TV Frontend kABI. - * - * The functions that implement the abstract interface demux should be defined - * static or module private and registered to the Demux core for external - * access. It is not necessary to implement every function in the struct - * &dmx_demux. For example, a demux interface might support Section filtering, - * but not PES filtering. The kABI client is expected to check the value of any - * function pointer before calling the function: the value of NULL means - * that the function is not available. - * - * Whenever the functions of the demux API modify shared data, the - * possibilities of lost update and race condition problems should be - * addressed, e.g. by protecting parts of code with mutexes. - * - * Note that functions called from a bottom half context must not sleep. - * Even a simple memory allocation without using %GFP_ATOMIC can result in a - * kernel thread being put to sleep if swapping is needed. For example, the - * Linux Kernel calls the functions of a network device interface from a - * bottom half context. Thus, if a demux kABI function is called from network - * device code, the function must not sleep. - */ - /* * Common definitions */ @@ -230,30 +191,6 @@ struct dmx_section_feed { int (*stop_filtering)(struct dmx_section_feed *feed); }; -/** - * DOC: Demux Callback - * - * This kernel-space API comprises the callback functions that deliver filtered - * data to the demux client. Unlike the other DVB kABIs, these functions are - * provided by the client and called from the demux code. - * - * The function pointers of this abstract interface are not packed into a - * structure as in the other demux APIs, because the callback functions are - * registered and used independent of each other. As an example, it is possible - * for the API client to provide several callback functions for receiving TS - * packets and no callbacks for PES packets or sections. - * - * The functions that implement the callback API need not be re-entrant: when - * a demux driver calls one of these functions, the driver is not allowed to - * call the function again before the original call returns. If a callback is - * triggered by a hardware interrupt, it is recommended to use the Linux - * bottom half mechanism or start a tasklet instead of making the callback - * function call directly from a hardware interrupt. - * - * This mechanism is implemented by dmx_ts_cb() and dmx_section_cb() - * callbacks. - */ - /** * typedef dmx_ts_cb - DVB demux TS filter callback function prototype * diff --git a/drivers/media/dvb-core/dvb_frontend.h b/drivers/media/dvb-core/dvb_frontend.h index 9592573a0b41..8c551174537a 100644 --- a/drivers/media/dvb-core/dvb_frontend.h +++ b/drivers/media/dvb-core/dvb_frontend.h @@ -1,6 +1,10 @@ /* * dvb_frontend.h * + * The Digital TV Frontend kABI defines a driver-internal interface for + * registering low-level, hardware specific driver to a hardware independent + * frontend layer. + * * Copyright (C) 2001 convergence integrated media GmbH * Copyright (C) 2004 convergence GmbH * @@ -42,29 +46,6 @@ #include "dvbdev.h" -/** - * DOC: Digital TV Frontend - * - * The Digital TV Frontend kABI defines a driver-internal interface for - * registering low-level, hardware specific driver to a hardware independent - * frontend layer. It is only of interest for Digital TV device driver writers. - * The header file for this API is named dvb_frontend.h and located in - * drivers/media/dvb-core. - * - * Before using the Digital TV frontend core, the bridge driver should attach - * the frontend demod, tuner and SEC devices and call dvb_register_frontend(), - * in order to register the new frontend at the subsystem. At device - * detach/removal, the bridge driver should call dvb_unregister_frontend() to - * remove the frontend from the core and then dvb_frontend_detach() to free the - * memory allocated by the frontend drivers. - * - * The drivers should also call dvb_frontend_suspend() as part of their - * handler for the &device_driver.suspend(), and dvb_frontend_resume() as - * part of their handler for &device_driver.resume(). - * - * A few other optional functions are provided to handle some special cases. - */ - /* * Maximum number of Delivery systems per frontend. It * should be smaller or equal to 32 diff --git a/include/media/media-device.h b/include/media/media-device.h index f743ae2210ee..4605fee0c228 100644 --- a/include/media/media-device.h +++ b/include/media/media-device.h @@ -29,237 +29,6 @@ #include #include -/** - * DOC: Media Controller - * - * The media controller userspace API is documented in DocBook format in - * Documentation/DocBook/media/v4l/media-controller.xml. This document focus - * on the kernel-side implementation of the media framework. - * - * * Abstract media device model: - * - * Discovering a device internal topology, and configuring it at runtime, is one - * of the goals of the media framework. To achieve this, hardware devices are - * modelled as an oriented graph of building blocks called entities connected - * through pads. - * - * An entity is a basic media hardware building block. It can correspond to - * a large variety of logical blocks such as physical hardware devices - * (CMOS sensor for instance), logical hardware devices (a building block - * in a System-on-Chip image processing pipeline), DMA channels or physical - * connectors. - * - * A pad is a connection endpoint through which an entity can interact with - * other entities. Data (not restricted to video) produced by an entity - * flows from the entity's output to one or more entity inputs. Pads should - * not be confused with physical pins at chip boundaries. - * - * A link is a point-to-point oriented connection between two pads, either - * on the same entity or on different entities. Data flows from a source - * pad to a sink pad. - * - * - * * Media device: - * - * A media device is represented by a struct &media_device instance, defined in - * include/media/media-device.h. Allocation of the structure is handled by the - * media device driver, usually by embedding the &media_device instance in a - * larger driver-specific structure. - * - * Drivers register media device instances by calling - * __media_device_register() via the macro media_device_register() - * and unregistered by calling - * media_device_unregister(). - * - * * Entities, pads and links: - * - * - Entities - * - * Entities are represented by a struct &media_entity instance, defined in - * include/media/media-entity.h. The structure is usually embedded into a - * higher-level structure, such as a v4l2_subdev or video_device instance, - * although drivers can allocate entities directly. - * - * Drivers initialize entity pads by calling - * media_entity_pads_init(). - * - * Drivers register entities with a media device by calling - * media_device_register_entity() - * and unregistred by calling - * media_device_unregister_entity(). - * - * - Interfaces - * - * Interfaces are represented by a struct &media_interface instance, defined in - * include/media/media-entity.h. Currently, only one type of interface is - * defined: a device node. Such interfaces are represented by a struct - * &media_intf_devnode. - * - * Drivers initialize and create device node interfaces by calling - * media_devnode_create() - * and remove them by calling: - * media_devnode_remove(). - * - * - Pads - * - * Pads are represented by a struct &media_pad instance, defined in - * include/media/media-entity.h. Each entity stores its pads in a pads array - * managed by the entity driver. Drivers usually embed the array in a - * driver-specific structure. - * - * Pads are identified by their entity and their 0-based index in the pads - * array. - * Both information are stored in the &media_pad structure, making the - * &media_pad pointer the canonical way to store and pass link references. - * - * Pads have flags that describe the pad capabilities and state. - * - * %MEDIA_PAD_FL_SINK indicates that the pad supports sinking data. - * %MEDIA_PAD_FL_SOURCE indicates that the pad supports sourcing data. - * - * NOTE: One and only one of %MEDIA_PAD_FL_SINK and %MEDIA_PAD_FL_SOURCE must - * be set for each pad. - * - * - Links - * - * Links are represented by a struct &media_link instance, defined in - * include/media/media-entity.h. There are two types of links: - * - * 1. pad to pad links: - * - * Associate two entities via their PADs. Each entity has a list that points - * to all links originating at or targeting any of its pads. - * A given link is thus stored twice, once in the source entity and once in - * the target entity. - * - * Drivers create pad to pad links by calling: - * media_create_pad_link() and remove with media_entity_remove_links(). - * - * 2. interface to entity links: - * - * Associate one interface to a Link. - * - * Drivers create interface to entity links by calling: - * media_create_intf_link() and remove with media_remove_intf_links(). - * - * NOTE: - * - * Links can only be created after having both ends already created. - * - * Links have flags that describe the link capabilities and state. The - * valid values are described at media_create_pad_link() and - * media_create_intf_link(). - * - * Graph traversal: - * - * The media framework provides APIs to iterate over entities in a graph. - * - * To iterate over all entities belonging to a media device, drivers can use - * the media_device_for_each_entity macro, defined in - * include/media/media-device.h. - * - * struct media_entity *entity; - * - * media_device_for_each_entity(entity, mdev) { - * // entity will point to each entity in turn - * ... - * } - * - * Drivers might also need to iterate over all entities in a graph that can be - * reached only through enabled links starting at a given entity. The media - * framework provides a depth-first graph traversal API for that purpose. - * - * Note that graphs with cycles (whether directed or undirected) are *NOT* - * supported by the graph traversal API. To prevent infinite loops, the graph - * traversal code limits the maximum depth to MEDIA_ENTITY_ENUM_MAX_DEPTH, - * currently defined as 16. - * - * Drivers initiate a graph traversal by calling - * media_entity_graph_walk_start() - * - * The graph structure, provided by the caller, is initialized to start graph - * traversal at the given entity. - * - * Drivers can then retrieve the next entity by calling - * media_entity_graph_walk_next() - * - * When the graph traversal is complete the function will return NULL. - * - * Graph traversal can be interrupted at any moment. No cleanup function call - * is required and the graph structure can be freed normally. - * - * Helper functions can be used to find a link between two given pads, or a pad - * connected to another pad through an enabled link - * media_entity_find_link() and media_entity_remote_pad() - * - * Use count and power handling: - * - * Due to the wide differences between drivers regarding power management - * needs, the media controller does not implement power management. However, - * the &media_entity structure includes a use_count field that media drivers - * can use to track the number of users of every entity for power management - * needs. - * - * The &media_entity.@use_count field is owned by media drivers and must not be - * touched by entity drivers. Access to the field must be protected by the - * &media_device.@graph_mutex lock. - * - * Links setup: - * - * Link properties can be modified at runtime by calling - * media_entity_setup_link() - * - * Pipelines and media streams: - * - * When starting streaming, drivers must notify all entities in the pipeline to - * prevent link states from being modified during streaming by calling - * media_entity_pipeline_start(). - * - * The function will mark all entities connected to the given entity through - * enabled links, either directly or indirectly, as streaming. - * - * The &media_pipeline instance pointed to by the pipe argument will be stored - * in every entity in the pipeline. Drivers should embed the &media_pipeline - * structure in higher-level pipeline structures and can then access the - * pipeline through the &media_entity pipe field. - * - * Calls to media_entity_pipeline_start() can be nested. The pipeline pointer - * must be identical for all nested calls to the function. - * - * media_entity_pipeline_start() may return an error. In that case, it will - * clean up any of the changes it did by itself. - * - * When stopping the stream, drivers must notify the entities with - * media_entity_pipeline_stop(). - * - * If multiple calls to media_entity_pipeline_start() have been made the same - * number of media_entity_pipeline_stop() calls are required to stop streaming. - * The &media_entity pipe field is reset to NULL on the last nested stop call. - * - * Link configuration will fail with -%EBUSY by default if either end of the - * link is a streaming entity. Links that can be modified while streaming must - * be marked with the %MEDIA_LNK_FL_DYNAMIC flag. - * - * If other operations need to be disallowed on streaming entities (such as - * changing entities configuration parameters) drivers can explicitly check the - * media_entity stream_count field to find out if an entity is streaming. This - * operation must be done with the media_device graph_mutex held. - * - * Link validation: - * - * Link validation is performed by media_entity_pipeline_start() for any - * entity which has sink pads in the pipeline. The - * &media_entity.@link_validate() callback is used for that purpose. In - * @link_validate() callback, entity driver should check that the properties of - * the source pad of the connected entity and its own sink pad match. It is up - * to the type of the entity (and in the end, the properties of the hardware) - * what matching actually means. - * - * Subsystems should facilitate link validation by providing subsystem specific - * helper functions to provide easy access for commonly needed information, and - * in the end provide a way to use driver-specific callbacks. - */ - struct ida; struct device;