From 07bcc411567cb96f9d1fc84fff8d387118a2920d Mon Sep 17 00:00:00 2001
From: Faiz Abbas <faiz_abbas@ti.com>
Date: Thu, 28 Nov 2019 16:34:22 +0530
Subject: [PATCH 1/9] Revert "mmc: sdhci: Fix incorrect switch to HS mode"
This reverts commit c894e33ddc1910e14d6f2a2016f60ab613fd8b37.
This commit aims to treat SD High speed and SDR25 as the same while
setting UHS Timings in HOST_CONTROL2 which leads to failures with some
SD cards in AM65x. Revert this commit.
The issue this commit was trying to fix can be implemented in a platform
specific callback instead of common sdhci code.
Cc: <stable@vger.kernel.org>
Signed-off-by: Faiz Abbas <faiz_abbas@ti.com>
Acked-by: Adrian Hunter <adrian.hunter@intel.com>
Link: https://lore.kernel.org/r/20191128110422.25917-1-faiz_abbas@ti.com
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
---
drivers/mmc/host/sdhci.c | 4 +---
1 file changed, 1 insertion(+), 3 deletions(-)
diff --git a/drivers/mmc/host/sdhci.c b/drivers/mmc/host/sdhci.c
index 3140fe2e5dba..296d955ede59 100644
--- a/drivers/mmc/host/sdhci.c
+++ b/drivers/mmc/host/sdhci.c
@@ -1882,9 +1882,7 @@ void sdhci_set_uhs_signaling(struct sdhci_host *host, unsigned timing)
ctrl_2 |= SDHCI_CTRL_UHS_SDR104;
else if (timing == MMC_TIMING_UHS_SDR12)
ctrl_2 |= SDHCI_CTRL_UHS_SDR12;
- else if (timing == MMC_TIMING_SD_HS ||
- timing == MMC_TIMING_MMC_HS ||
- timing == MMC_TIMING_UHS_SDR25)
+ else if (timing == MMC_TIMING_UHS_SDR25)
ctrl_2 |= SDHCI_CTRL_UHS_SDR25;
else if (timing == MMC_TIMING_UHS_SDR50)
ctrl_2 |= SDHCI_CTRL_UHS_SDR50;
From fa56ac9792265354b565f28def7164e7d7db2b1e Mon Sep 17 00:00:00 2001
From: Veerabhadrarao Badiganti <vbadigan@codeaurora.org>
Date: Tue, 26 Nov 2019 10:19:16 +0000
Subject: [PATCH 2/9] mmc: sdhci-msm: Correct the offset and value for
DDR_CONFIG register
The DDR_CONFIG register offset got updated after a specific
minor version of sdcc V4. This offset change has not been properly
taken care of while updating register changes for sdcc V5.
Correcting proper offset for this register.
Also updating this register value to reflect the recommended RCLK
delay.
Signed-off-by: Veerabhadrarao Badiganti <vbadigan@codeaurora.org>
Link: https://lore.kernel.org/r/0101016ea738ec72-fa0f852d-20f8-474a-80b2-4b0ef63b132c-000000@us-west-2.amazonses.com
Fixes: f15358885dda ("mmc: sdhci-msm: Define new Register address map")
Cc: stable@vger.kernel.org
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
---
drivers/mmc/host/sdhci-msm.c | 28 +++++++++++++++++++---------
1 file changed, 19 insertions(+), 9 deletions(-)
diff --git a/drivers/mmc/host/sdhci-msm.c b/drivers/mmc/host/sdhci-msm.c
index b75c82d8d6c1..3d0bb5e2e09b 100644
--- a/drivers/mmc/host/sdhci-msm.c
+++ b/drivers/mmc/host/sdhci-msm.c
@@ -99,7 +99,7 @@
#define CORE_PWRSAVE_DLL BIT(3)
-#define DDR_CONFIG_POR_VAL 0x80040853
+#define DDR_CONFIG_POR_VAL 0x80040873
#define INVALID_TUNING_PHASE -1
@@ -148,8 +148,9 @@ struct sdhci_msm_offset {
u32 core_ddr_200_cfg;
u32 core_vendor_spec3;
u32 core_dll_config_2;
+ u32 core_dll_config_3;
+ u32 core_ddr_config_old; /* Applicable to sdcc minor ver < 0x49 */
u32 core_ddr_config;
- u32 core_ddr_config_2;
};
static const struct sdhci_msm_offset sdhci_msm_v5_offset = {
@@ -177,8 +178,8 @@ static const struct sdhci_msm_offset sdhci_msm_v5_offset = {
.core_ddr_200_cfg = 0x224,
.core_vendor_spec3 = 0x250,
.core_dll_config_2 = 0x254,
- .core_ddr_config = 0x258,
- .core_ddr_config_2 = 0x25c,
+ .core_dll_config_3 = 0x258,
+ .core_ddr_config = 0x25c,
};
static const struct sdhci_msm_offset sdhci_msm_mci_offset = {
@@ -207,8 +208,8 @@ static const struct sdhci_msm_offset sdhci_msm_mci_offset = {
.core_ddr_200_cfg = 0x184,
.core_vendor_spec3 = 0x1b0,
.core_dll_config_2 = 0x1b4,
- .core_ddr_config = 0x1b8,
- .core_ddr_config_2 = 0x1bc,
+ .core_ddr_config_old = 0x1b8,
+ .core_ddr_config = 0x1bc,
};
struct sdhci_msm_variant_ops {
@@ -253,6 +254,7 @@ struct sdhci_msm_host {
const struct sdhci_msm_offset *offset;
bool use_cdr;
u32 transfer_mode;
+ bool updated_ddr_cfg;
};
static const struct sdhci_msm_offset *sdhci_priv_msm_offset(struct sdhci_host *host)
@@ -924,8 +926,10 @@ out:
static int sdhci_msm_cm_dll_sdc4_calibration(struct sdhci_host *host)
{
struct mmc_host *mmc = host->mmc;
- u32 dll_status, config;
+ u32 dll_status, config, ddr_cfg_offset;
int ret;
+ struct sdhci_pltfm_host *pltfm_host = sdhci_priv(host);
+ struct sdhci_msm_host *msm_host = sdhci_pltfm_priv(pltfm_host);
const struct sdhci_msm_offset *msm_offset =
sdhci_priv_msm_offset(host);
@@ -938,8 +942,11 @@ static int sdhci_msm_cm_dll_sdc4_calibration(struct sdhci_host *host)
* bootloaders. In the future, if this changes, then the desired
* values will need to be programmed appropriately.
*/
- writel_relaxed(DDR_CONFIG_POR_VAL, host->ioaddr +
- msm_offset->core_ddr_config);
+ if (msm_host->updated_ddr_cfg)
+ ddr_cfg_offset = msm_offset->core_ddr_config;
+ else
+ ddr_cfg_offset = msm_offset->core_ddr_config_old;
+ writel_relaxed(DDR_CONFIG_POR_VAL, host->ioaddr + ddr_cfg_offset);
if (mmc->ios.enhanced_strobe) {
config = readl_relaxed(host->ioaddr +
@@ -1899,6 +1906,9 @@ static int sdhci_msm_probe(struct platform_device *pdev)
msm_offset->core_vendor_spec_capabilities0);
}
+ if (core_major == 1 && core_minor >= 0x49)
+ msm_host->updated_ddr_cfg = true;
+
/*
* Power on reset state may trigger power irq if previous status of
* PWRCTL was either BUS_ON or IO_HIGH_V. So before enabling pwr irq
From 8f34e5bd7024d1ffebddd82d7318b1be17be9e9a Mon Sep 17 00:00:00 2001
From: Chaotian Jing <chaotian.jing@mediatek.com>
Date: Wed, 4 Dec 2019 15:19:58 +0800
Subject: [PATCH 3/9] mmc: mediatek: fix CMD_TA to 2 for MT8173 HS200/HS400
mode
there is a chance that always get response CRC error after HS200 tuning,
the reason is that need set CMD_TA to 2. this modification is only for
MT8173.
Signed-off-by: Chaotian Jing <chaotian.jing@mediatek.com>
Tested-by: Hsin-Yi Wang <hsinyi@chromium.org>
Cc: stable@vger.kernel.org
Fixes: 1ede5cb88a29 ("mmc: mediatek: Use data tune for CMD line tune")
Link: https://lore.kernel.org/r/20191204071958.18553-1-chaotian.jing@mediatek.com
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
---
drivers/mmc/host/mtk-sd.c | 2 ++
1 file changed, 2 insertions(+)
diff --git a/drivers/mmc/host/mtk-sd.c b/drivers/mmc/host/mtk-sd.c
index 189e42674d85..010fe29a4888 100644
--- a/drivers/mmc/host/mtk-sd.c
+++ b/drivers/mmc/host/mtk-sd.c
@@ -228,6 +228,7 @@
#define MSDC_PATCH_BIT_SPCPUSH (0x1 << 29) /* RW */
#define MSDC_PATCH_BIT_DECRCTMO (0x1 << 30) /* RW */
+#define MSDC_PATCH_BIT1_CMDTA (0x7 << 3) /* RW */
#define MSDC_PATCH_BIT1_STOP_DLY (0xf << 8) /* RW */
#define MSDC_PATCH_BIT2_CFGRESP (0x1 << 15) /* RW */
@@ -1881,6 +1882,7 @@ static int hs400_tune_response(struct mmc_host *mmc, u32 opcode)
/* select EMMC50 PAD CMD tune */
sdr_set_bits(host->base + PAD_CMD_TUNE, BIT(0));
+ sdr_set_field(host->base + MSDC_PATCH_BIT1, MSDC_PATCH_BIT1_CMDTA, 2);
if (mmc->ios.timing == MMC_TIMING_MMC_HS200 ||
mmc->ios.timing == MMC_TIMING_UHS_SDR104)
From 8b6dc6b2d60221e90703babbc141f063b8a07e72 Mon Sep 17 00:00:00 2001
From: Rasmus Villemoes <linux@rasmusvillemoes.dk>
Date: Wed, 4 Dec 2019 09:54:46 +0100
Subject: [PATCH 4/9] mmc: sdhci-of-esdhc: Revert "mmc: sdhci-of-esdhc: add
erratum A-009204 support"
This reverts commit 5dd195522562542bc6ebe6e7bd47890d8b7ca93c.
First, the fix seems to be plain wrong, since the erratum suggests
waiting 5ms before setting setting SYSCTL[RSTD], but this msleep()
happens after the call of sdhci_reset() which is where that bit gets
set (if SDHCI_RESET_DATA is in mask).
Second, walking the whole device tree to figure out if some node has a
"fsl,p2020-esdhc" compatible string is hugely expensive - about 70 to
100 us on our mpc8309 board. Walking the device tree is done under a
raw_spin_lock, so this is obviously really bad on an -rt system, and a
waste of time on all.
In fact, since esdhc_reset() seems to get called around 100 times per
second, that mpc8309 now spends 0.8% of its time determining that
it is not a p2020. Whether those 100 calls/s are normal or due to some
other bug or misconfiguration, regularly hitting a 100 us
non-preemptible window is unacceptable.
Signed-off-by: Rasmus Villemoes <linux@rasmusvillemoes.dk>
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/r/20191204085447.27491-1-linux@rasmusvillemoes.dk
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
---
drivers/mmc/host/sdhci-of-esdhc.c | 3 ---
1 file changed, 3 deletions(-)
diff --git a/drivers/mmc/host/sdhci-of-esdhc.c b/drivers/mmc/host/sdhci-of-esdhc.c
index 5cca3fa4610b..7f87a90bf56a 100644
--- a/drivers/mmc/host/sdhci-of-esdhc.c
+++ b/drivers/mmc/host/sdhci-of-esdhc.c
@@ -764,9 +764,6 @@ static void esdhc_reset(struct sdhci_host *host, u8 mask)
sdhci_writel(host, host->ier, SDHCI_INT_ENABLE);
sdhci_writel(host, host->ier, SDHCI_SIGNAL_ENABLE);
- if (of_find_compatible_node(NULL, NULL, "fsl,p2020-esdhc"))
- mdelay(5);
-
if (mask & SDHCI_RESET_ALL) {
val = sdhci_readl(host, ESDHC_TBCTL);
val &= ~ESDHC_TB_EN;
From 2c92dd20304f505b6ef43d206fff21bda8f1f0ae Mon Sep 17 00:00:00 2001
From: Faiz Abbas <faiz_abbas@ti.com>
Date: Fri, 6 Dec 2019 17:13:26 +0530
Subject: [PATCH 5/9] mmc: sdhci: Update the tuning failed messages to pr_debug
level
Tuning support in DDR50 speed mode was added in SD Specifications Part1
Physical Layer Specification v3.01. Its not possible to distinguish
between v3.00 and v3.01 from the SCR and that is why since
commit 4324f6de6d2e ("mmc: core: enable CMD19 tuning for DDR50 mode")
tuning failures are ignored in DDR50 speed mode.
Cards compatible with v3.00 don't respond to CMD19 in DDR50 and this
error gets printed during enumeration and also if retune is triggered at
any time during operation. Update the printk level to pr_debug so that
these errors don't lead to false error reports.
Signed-off-by: Faiz Abbas <faiz_abbas@ti.com>
Cc: stable@vger.kernel.org # v4.4+
Link: https://lore.kernel.org/r/20191206114326.15856-1-faiz_abbas@ti.com
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
---
drivers/mmc/host/sdhci.c | 4 ++--
1 file changed, 2 insertions(+), 2 deletions(-)
diff --git a/drivers/mmc/host/sdhci.c b/drivers/mmc/host/sdhci.c
index 296d955ede59..42a9c8179da7 100644
--- a/drivers/mmc/host/sdhci.c
+++ b/drivers/mmc/host/sdhci.c
@@ -2417,8 +2417,8 @@ static int __sdhci_execute_tuning(struct sdhci_host *host, u32 opcode)
sdhci_send_tuning(host, opcode);
if (!host->tuning_done) {
- pr_info("%s: Tuning timeout, falling back to fixed sampling clock\n",
- mmc_hostname(host->mmc));
+ pr_debug("%s: Tuning timeout, falling back to fixed sampling clock\n",
+ mmc_hostname(host->mmc));
sdhci_abort_tuning(host, opcode);
return -ETIMEDOUT;
}
From fe0acab448f68c3146235afe03fb932e242ec94c Mon Sep 17 00:00:00 2001
From: Yangbo Lu <yangbo.lu@nxp.com>
Date: Mon, 16 Dec 2019 11:18:42 +0800
Subject: [PATCH 6/9] mmc: sdhci-of-esdhc: fix P2020 errata handling
Two previous patches introduced below quirks for P2020 platforms.
- SDHCI_QUIRK_RESET_AFTER_REQUEST
- SDHCI_QUIRK_BROKEN_TIMEOUT_VAL
The patches made a mistake to add them in quirks2 of sdhci_host
structure, while they were defined for quirks.
host->quirks2 |= SDHCI_QUIRK_RESET_AFTER_REQUEST;
host->quirks2 |= SDHCI_QUIRK_BROKEN_TIMEOUT_VAL;
This patch is to fix them.
host->quirks |= SDHCI_QUIRK_RESET_AFTER_REQUEST;
host->quirks |= SDHCI_QUIRK_BROKEN_TIMEOUT_VAL;
Fixes: 05cb6b2a66fa ("mmc: sdhci-of-esdhc: add erratum eSDHC-A001 and A-008358 support")
Fixes: a46e42712596 ("mmc: sdhci-of-esdhc: add erratum eSDHC5 support")
Signed-off-by: Yangbo Lu <yangbo.lu@nxp.com>
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/r/20191216031842.40068-1-yangbo.lu@nxp.com
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
---
drivers/mmc/host/sdhci-of-esdhc.c | 4 ++--
1 file changed, 2 insertions(+), 2 deletions(-)
diff --git a/drivers/mmc/host/sdhci-of-esdhc.c b/drivers/mmc/host/sdhci-of-esdhc.c
index 7f87a90bf56a..4ca640e6fd55 100644
--- a/drivers/mmc/host/sdhci-of-esdhc.c
+++ b/drivers/mmc/host/sdhci-of-esdhc.c
@@ -1300,8 +1300,8 @@ static int sdhci_esdhc_probe(struct platform_device *pdev)
host->quirks &= ~SDHCI_QUIRK_NO_BUSY_IRQ;
if (of_find_compatible_node(NULL, NULL, "fsl,p2020-esdhc")) {
- host->quirks2 |= SDHCI_QUIRK_RESET_AFTER_REQUEST;
- host->quirks2 |= SDHCI_QUIRK_BROKEN_TIMEOUT_VAL;
+ host->quirks |= SDHCI_QUIRK_RESET_AFTER_REQUEST;
+ host->quirks |= SDHCI_QUIRK_BROKEN_TIMEOUT_VAL;
}
if (of_device_is_compatible(np, "fsl,p5040-esdhc") ||
From bedf9fc01ff1f40cfd1a79ccacedd9f3cd8e652a Mon Sep 17 00:00:00 2001
From: Adrian Hunter <adrian.hunter@intel.com>
Date: Tue, 17 Dec 2019 11:53:48 +0200
Subject: [PATCH 7/9] mmc: sdhci: Workaround broken command queuing on Intel
GLK
Command queuing has been reported broken on some Lenovo systems based on
Intel GLK. This is likely a BIOS issue, so disable command queuing for
Intel GLK if the BIOS vendor string is "LENOVO".
Fixes: 8ee82bda230f ("mmc: sdhci-pci: Add CQHCI support for Intel GLK")
Signed-off-by: Adrian Hunter <adrian.hunter@intel.com>
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/r/20191217095349.14592-1-adrian.hunter@intel.com
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
---
drivers/mmc/host/sdhci-pci-core.c | 10 +++++++++-
1 file changed, 9 insertions(+), 1 deletion(-)
diff --git a/drivers/mmc/host/sdhci-pci-core.c b/drivers/mmc/host/sdhci-pci-core.c
index acefb76b4e15..5091e2c1c0e5 100644
--- a/drivers/mmc/host/sdhci-pci-core.c
+++ b/drivers/mmc/host/sdhci-pci-core.c
@@ -27,6 +27,7 @@
#include <linux/mmc/slot-gpio.h>
#include <linux/mmc/sdhci-pci-data.h>
#include <linux/acpi.h>
+#include <linux/dmi.h>
#ifdef CONFIG_X86
#include <asm/iosf_mbi.h>
@@ -783,11 +784,18 @@ static int byt_emmc_probe_slot(struct sdhci_pci_slot *slot)
return 0;
}
+static bool glk_broken_cqhci(struct sdhci_pci_slot *slot)
+{
+ return slot->chip->pdev->device == PCI_DEVICE_ID_INTEL_GLK_EMMC &&
+ dmi_match(DMI_BIOS_VENDOR, "LENOVO");
+}
+
static int glk_emmc_probe_slot(struct sdhci_pci_slot *slot)
{
int ret = byt_emmc_probe_slot(slot);
- slot->host->mmc->caps2 |= MMC_CAP2_CQE;
+ if (!glk_broken_cqhci(slot))
+ slot->host->mmc->caps2 |= MMC_CAP2_CQE;
if (slot->chip->pdev->device != PCI_DEVICE_ID_INTEL_GLK_EMMC) {
slot->host->mmc->caps2 |= MMC_CAP2_HS400_ES,
From 75d27ea1abf7af3cc2cdec3513e74f52191605c8 Mon Sep 17 00:00:00 2001
From: Adrian Hunter <adrian.hunter@intel.com>
Date: Tue, 17 Dec 2019 11:53:49 +0200
Subject: [PATCH 8/9] mmc: sdhci: Add a quirk for broken command queuing
Command queuing has been reported broken on some systems based on Intel
GLK. A separate patch disables command queuing in some cases.
This patch adds a quirk for broken command queuing, which enables users
with problems to disable command queuing using sdhci module parameters for
quirks.
Fixes: 8ee82bda230f ("mmc: sdhci-pci: Add CQHCI support for Intel GLK")
Signed-off-by: Adrian Hunter <adrian.hunter@intel.com>
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/r/20191217095349.14592-2-adrian.hunter@intel.com
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
---
drivers/mmc/host/sdhci.c | 3 +++
drivers/mmc/host/sdhci.h | 2 ++
2 files changed, 5 insertions(+)
diff --git a/drivers/mmc/host/sdhci.c b/drivers/mmc/host/sdhci.c
index 42a9c8179da7..1b1c26da3fe0 100644
--- a/drivers/mmc/host/sdhci.c
+++ b/drivers/mmc/host/sdhci.c
@@ -3767,6 +3767,9 @@ int sdhci_setup_host(struct sdhci_host *host)
mmc_hostname(mmc), host->version);
}
+ if (host->quirks & SDHCI_QUIRK_BROKEN_CQE)
+ mmc->caps2 &= ~MMC_CAP2_CQE;
+
if (host->quirks & SDHCI_QUIRK_FORCE_DMA)
host->flags |= SDHCI_USE_SDMA;
else if (!(host->caps & SDHCI_CAN_DO_SDMA))
diff --git a/drivers/mmc/host/sdhci.h b/drivers/mmc/host/sdhci.h
index 0ed3e0eaef5f..fe83ece6965b 100644
--- a/drivers/mmc/host/sdhci.h
+++ b/drivers/mmc/host/sdhci.h
@@ -409,6 +409,8 @@ struct sdhci_host {
#define SDHCI_QUIRK_BROKEN_CARD_DETECTION (1<<15)
/* Controller reports inverted write-protect state */
#define SDHCI_QUIRK_INVERTED_WRITE_PROTECT (1<<16)
+/* Controller has unusable command queue engine */
+#define SDHCI_QUIRK_BROKEN_CQE (1<<17)
/* Controller does not like fast PIO transfers */
#define SDHCI_QUIRK_PIO_NEEDS_DELAY (1<<18)
/* Controller does not have a LED */
From f667216c5c7c967c3e568cdddefb51fe606bfe26 Mon Sep 17 00:00:00 2001
From: Yangbo Lu <yangbo.lu@nxp.com>
Date: Thu, 19 Dec 2019 11:23:35 +0800
Subject: [PATCH 9/9] mmc: sdhci-of-esdhc: re-implement erratum A-009204
workaround
The erratum A-009204 workaround patch was reverted because of
incorrect implementation.
8b6dc6b mmc: sdhci-of-esdhc: Revert "mmc: sdhci-of-esdhc: add
erratum A-009204 support"
This patch is to re-implement the workaround (add a 5 ms delay
before setting SYSCTL[RSTD] to make sure all the DMA transfers
are finished).
Signed-off-by: Yangbo Lu <yangbo.lu@nxp.com>
Link: https://lore.kernel.org/r/20191219032335.26528-1-yangbo.lu@nxp.com
Fixes: 5dd195522562 ("mmc: sdhci-of-esdhc: add erratum A-009204 support")
Cc: stable@vger.kernel.org
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
---
drivers/mmc/host/sdhci-of-esdhc.c | 10 ++++++++++
1 file changed, 10 insertions(+)
diff --git a/drivers/mmc/host/sdhci-of-esdhc.c b/drivers/mmc/host/sdhci-of-esdhc.c
index 4ca640e6fd55..500f70a6ee42 100644
--- a/drivers/mmc/host/sdhci-of-esdhc.c
+++ b/drivers/mmc/host/sdhci-of-esdhc.c
@@ -80,6 +80,7 @@ struct sdhci_esdhc {
bool quirk_tuning_erratum_type1;
bool quirk_tuning_erratum_type2;
bool quirk_ignore_data_inhibit;
+ bool quirk_delay_before_data_reset;
bool in_sw_tuning;
unsigned int peripheral_clock;
const struct esdhc_clk_fixup *clk_fixup;
@@ -759,6 +760,11 @@ static void esdhc_reset(struct sdhci_host *host, u8 mask)
struct sdhci_esdhc *esdhc = sdhci_pltfm_priv(pltfm_host);
u32 val;
+ if (esdhc->quirk_delay_before_data_reset &&
+ (mask & SDHCI_RESET_DATA) &&
+ (host->flags & SDHCI_REQ_USE_DMA))
+ mdelay(5);
+
sdhci_reset(host, mask);
sdhci_writel(host, host->ier, SDHCI_INT_ENABLE);
@@ -1218,6 +1224,10 @@ static void esdhc_init(struct platform_device *pdev, struct sdhci_host *host)
if (match)
esdhc->clk_fixup = match->data;
np = pdev->dev.of_node;
+
+ if (of_device_is_compatible(np, "fsl,p2020-esdhc"))
+ esdhc->quirk_delay_before_data_reset = true;
+
clk = of_clk_get(np, 0);
if (!IS_ERR(clk)) {
/*