iv/linux
1
0
Fork 0
Code Issues Pull Requests Actions Packages Projects Releases Wiki Activity

net: dsa: tag_8021q: Change order of rx_vid setup

Browse Source 
The 802.1Q tagging performs an unbalanced setup in terms of RX VIDs on
the CPU port. For the ingress path of a 802.1Q switch to work, the RX
VID of a port needs to be seen as tagged egress on the CPU port.

While configuring the other front-panel ports to be part of this VID,
for bridge scenarios, the untagged flag is applied even on the CPU port
in dsa_switch_vlan_add.  This happens because DSA applies the same flags
on the CPU port as on the (bridge-controlled) slave ports, and the
effect in this case is that the CPU port tagged settings get deleted.

Instead of fixing DSA by introducing a way to control VLAN flags on the
CPU port (and hence stop inheriting from the slave ports) - a hard,
perhaps intractable problem - avoid this situation by moving the setup
part of the RX VID on the CPU port after all the other front-panel ports
have been added to the VID.

Fixes: f9bbe4477c ("net: dsa: Optional VLAN-based port separation for switches without tagging")
Signed-off-by: Ioana Ciornei <ioana.ciornei@nxp.com>
Signed-off-by: Vladimir Oltean <olteanv@gmail.com>
Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
This commit is contained in:
Ioana Ciornei 2019-05-30 00:42:30 +03:00 committed by David S. Miller
parent 2180843721
commit d34d2baa91
1 changed files with 15 additions and 4 deletions
Show Stats Download Patch File Download Diff File Expand all files Collapse all files

19
net/dsa/tag_8021q.c
View File

@ -128,10 +128,7 @@ int dsa_port_setup_8021q_tagging(struct dsa_switch *ds, int port, bool enabled)
u16 flags;
if (i == upstream)
/* CPU port needs to see this port's RX VID
* as tagged egress.
*/
flags = 0;
continue;
else if (i == port)
/* The RX VID is pvid on this port */
flags = BRIDGE_VLAN_INFO_UNTAGGED |
@ -150,6 +147,20 @@ int dsa_port_setup_8021q_tagging(struct dsa_switch *ds, int port, bool enabled)
return err;
}
}
/* CPU port needs to see this port's RX VID
* as tagged egress.
*/
if (enabled)
err = dsa_port_vid_add(upstream_dp, rx_vid, 0);
else
err = dsa_port_vid_del(upstream_dp, rx_vid);
if (err) {
dev_err(ds->dev, "Failed to apply RX VID %d to port %d: %d\n",
rx_vid, port, err);
return err;
}
/* Finally apply the TX VID on this port and on the CPU port */
if (enabled)
err = dsa_port_vid_add(dp, tx_vid, BRIDGE_VLAN_INFO_UNTAGGED);