arm64: dts: qcom: sm8350: Add display system nodes
Add mdss, mdss_mdp, dsi0, dsi0_phy nodes. With these nodes the display subsystem is configured to support one DSI output. Signed-off-by: Robert Foss <robert.foss@linaro.org> Signed-off-by: Bjorn Andersson <andersson@kernel.org> Link: https://lore.kernel.org/r/20230117120223.1055225-2-rfoss@kernel.org
This commit is contained in:
Robert Foss
Bjorn Andersson
parent
6fa1a0f8cb
commit
d4a4410583
@ -3,6 +3,7 @@
|
||||
* Copyright (c) 2020, Linaro Limited
|
||||
*/
|
||||
|
||||
#include <dt-bindings/interconnect/qcom,sm8350.h>
|
||||
#include <dt-bindings/interrupt-controller/arm-gic.h>
|
||||
#include <dt-bindings/clock/qcom,dispcc-sm8350.h>
|
||||
#include <dt-bindings/clock/qcom,gcc-sm8350.h>
|
||||
@ -2781,14 +2782,302 @@
|
||||
};
|
||||
};
|
||||
|
||||
mdss: display-subsystem@ae00000 {
|
||||
compatible = "qcom,sm8350-mdss";
|
||||
reg = <0 0x0ae00000 0 0x1000>;
|
||||
reg-names = "mdss";
|
||||
|
||||
interconnects = <&mmss_noc MASTER_MDP0 0 &mc_virt SLAVE_EBI1 0>,
|
||||
<&mmss_noc MASTER_MDP1 0 &mc_virt SLAVE_EBI1 0>;
|
||||
interconnect-names = "mdp0-mem", "mdp1-mem";
|
||||
|
||||
power-domains = <&dispcc MDSS_GDSC>;
|
||||
resets = <&dispcc DISP_CC_MDSS_CORE_BCR>;
|
||||
|
||||
clocks = <&dispcc DISP_CC_MDSS_AHB_CLK>,
|
||||
<&gcc GCC_DISP_HF_AXI_CLK>,
|
||||
<&gcc GCC_DISP_SF_AXI_CLK>,
|
||||
<&dispcc DISP_CC_MDSS_MDP_CLK>;
|
||||
clock-names = "iface", "bus", "nrt_bus", "core";
|
||||
|
||||
interrupts = <GIC_SPI 83 IRQ_TYPE_LEVEL_HIGH>;
|
||||
interrupt-controller;
|
||||
#interrupt-cells = <1>;
|
||||
|
||||
iommus = <&apps_smmu 0x820 0x402>;
|
||||
|
||||
status = "disabled";
|
||||
|
||||
#address-cells = <2>;
|
||||
#size-cells = <2>;
|
||||
ranges;
|
||||
|
||||
dpu_opp_table: opp-table {
|
||||
compatible = "operating-points-v2";
|
||||
|
||||
/* TODO: opp-200000000 should work with
|
||||
* &rpmhpd_opp_low_svs, but one some of
|
||||
* sm8350_hdk boards reboot using this
|
||||
* opp.
|
||||
*/
|
||||
opp-200000000 {
|
||||
opp-hz = /bits/ 64 <200000000>;
|
||||
required-opps = <&rpmhpd_opp_svs>;
|
||||
};
|
||||
|
||||
opp-300000000 {
|
||||
opp-hz = /bits/ 64 <300000000>;
|
||||
required-opps = <&rpmhpd_opp_svs>;
|
||||
};
|
||||
|
||||
opp-345000000 {
|
||||
opp-hz = /bits/ 64 <345000000>;
|
||||
required-opps = <&rpmhpd_opp_svs_l1>;
|
||||
};
|
||||
|
||||
opp-460000000 {
|
||||
opp-hz = /bits/ 64 <460000000>;
|
||||
required-opps = <&rpmhpd_opp_nom>;
|
||||
};
|
||||
};
|
||||
|
||||
mdss_mdp: display-controller@ae01000 {
|
||||
compatible = "qcom,sm8350-dpu";
|
||||
reg = <0 0x0ae01000 0 0x8f000>,
|
||||
<0 0x0aeb0000 0 0x2008>;
|
||||
reg-names = "mdp", "vbif";
|
||||
|
||||
clocks = <&gcc GCC_DISP_HF_AXI_CLK>,
|
||||
<&gcc GCC_DISP_SF_AXI_CLK>,
|
||||
<&dispcc DISP_CC_MDSS_AHB_CLK>,
|
||||
<&dispcc DISP_CC_MDSS_MDP_LUT_CLK>,
|
||||
<&dispcc DISP_CC_MDSS_MDP_CLK>,
|
||||
<&dispcc DISP_CC_MDSS_VSYNC_CLK>;
|
||||
clock-names = "bus",
|
||||
"nrt_bus",
|
||||
"iface",
|
||||
"lut",
|
||||
"core",
|
||||
"vsync";
|
||||
|
||||
assigned-clocks = <&dispcc DISP_CC_MDSS_VSYNC_CLK>;
|
||||
assigned-clock-rates = <19200000>;
|
||||
|
||||
operating-points-v2 = <&dpu_opp_table>;
|
||||
power-domains = <&rpmhpd SM8350_MMCX>;
|
||||
|
||||
interrupt-parent = <&mdss>;
|
||||
interrupts = <0>;
|
||||
|
||||
ports {
|
||||
#address-cells = <1>;
|
||||
#size-cells = <0>;
|
||||
|
||||
port@0 {
|
||||
reg = <0>;
|
||||
dpu_intf1_out: endpoint {
|
||||
remote-endpoint = <&dsi0_in>;
|
||||
};
|
||||
};
|
||||
};
|
||||
};
|
||||
|
||||
mdss_dsi0: dsi@ae94000 {
|
||||
compatible = "qcom,mdss-dsi-ctrl";
|
||||
reg = <0 0x0ae94000 0 0x400>;
|
||||
reg-names = "dsi_ctrl";
|
||||
|
||||
interrupt-parent = <&mdss>;
|
||||
interrupts = <4>;
|
||||
|
||||
clocks = <&dispcc DISP_CC_MDSS_BYTE0_CLK>,
|
||||
<&dispcc DISP_CC_MDSS_BYTE0_INTF_CLK>,
|
||||
<&dispcc DISP_CC_MDSS_PCLK0_CLK>,
|
||||
<&dispcc DISP_CC_MDSS_ESC0_CLK>,
|
||||
<&dispcc DISP_CC_MDSS_AHB_CLK>,
|
||||
<&gcc GCC_DISP_HF_AXI_CLK>;
|
||||
clock-names = "byte",
|
||||
"byte_intf",
|
||||
"pixel",
|
||||
"core",
|
||||
"iface",
|
||||
"bus";
|
||||
|
||||
assigned-clocks = <&dispcc DISP_CC_MDSS_BYTE0_CLK_SRC>,
|
||||
<&dispcc DISP_CC_MDSS_PCLK0_CLK_SRC>;
|
||||
assigned-clock-parents = <&mdss_dsi0_phy 0>,
|
||||
<&mdss_dsi0_phy 1>;
|
||||
|
||||
operating-points-v2 = <&dsi0_opp_table>;
|
||||
power-domains = <&rpmhpd SM8350_MMCX>;
|
||||
|
||||
phys = <&mdss_dsi0_phy>;
|
||||
|
||||
status = "disabled";
|
||||
|
||||
dsi0_opp_table: opp-table {
|
||||
compatible = "operating-points-v2";
|
||||
|
||||
/* TODO: opp-187500000 should work with
|
||||
* &rpmhpd_opp_low_svs, but one some of
|
||||
* sm8350_hdk boards reboot using this
|
||||
* opp.
|
||||
*/
|
||||
opp-187500000 {
|
||||
opp-hz = /bits/ 64 <187500000>;
|
||||
required-opps = <&rpmhpd_opp_svs>;
|
||||
};
|
||||
|
||||
opp-300000000 {
|
||||
opp-hz = /bits/ 64 <300000000>;
|
||||
required-opps = <&rpmhpd_opp_svs>;
|
||||
};
|
||||
|
||||
opp-358000000 {
|
||||
opp-hz = /bits/ 64 <358000000>;
|
||||
required-opps = <&rpmhpd_opp_svs_l1>;
|
||||
};
|
||||
};
|
||||
|
||||
ports {
|
||||
#address-cells = <1>;
|
||||
#size-cells = <0>;
|
||||
|
||||
port@0 {
|
||||
reg = <0>;
|
||||
dsi0_in: endpoint {
|
||||
remote-endpoint = <&dpu_intf1_out>;
|
||||
};
|
||||
};
|
||||
|
||||
port@1 {
|
||||
reg = <1>;
|
||||
dsi0_out: endpoint {
|
||||
};
|
||||
};
|
||||
};
|
||||
};
|
||||
|
||||
mdss_dsi0_phy: phy@ae94400 {
|
||||
compatible = "qcom,dsi-phy-5nm-8350";
|
||||
reg = <0 0x0ae94400 0 0x200>,
|
||||
<0 0x0ae94600 0 0x280>,
|
||||
<0 0x0ae94900 0 0x260>;
|
||||
reg-names = "dsi_phy",
|
||||
"dsi_phy_lane",
|
||||
"dsi_pll";
|
||||
|
||||
#clock-cells = <1>;
|
||||
#phy-cells = <0>;
|
||||
|
||||
clocks = <&dispcc DISP_CC_MDSS_AHB_CLK>,
|
||||
<&rpmhcc RPMH_CXO_CLK>;
|
||||
clock-names = "iface", "ref";
|
||||
|
||||
status = "disabled";
|
||||
};
|
||||
|
||||
mdss_dsi1: dsi@ae96000 {
|
||||
compatible = "qcom,mdss-dsi-ctrl";
|
||||
reg = <0 0x0ae96000 0 0x400>;
|
||||
reg-names = "dsi_ctrl";
|
||||
|
||||
interrupt-parent = <&mdss>;
|
||||
interrupts = <4>;
|
||||
|
||||
clocks = <&dispcc DISP_CC_MDSS_BYTE1_CLK>,
|
||||
<&dispcc DISP_CC_MDSS_BYTE1_INTF_CLK>,
|
||||
<&dispcc DISP_CC_MDSS_PCLK1_CLK>,
|
||||
<&dispcc DISP_CC_MDSS_ESC1_CLK>,
|
||||
<&dispcc DISP_CC_MDSS_AHB_CLK>,
|
||||
<&gcc GCC_DISP_HF_AXI_CLK>;
|
||||
clock-names = "byte",
|
||||
"byte_intf",
|
||||
"pixel",
|
||||
"core",
|
||||
"iface",
|
||||
"bus";
|
||||
|
||||
assigned-clocks = <&dispcc DISP_CC_MDSS_BYTE1_CLK_SRC>,
|
||||
<&dispcc DISP_CC_MDSS_PCLK1_CLK_SRC>;
|
||||
assigned-clock-parents = <&mdss_dsi1_phy 0>,
|
||||
<&mdss_dsi1_phy 1>;
|
||||
|
||||
operating-points-v2 = <&dsi1_opp_table>;
|
||||
power-domains = <&rpmhpd SM8350_MMCX>;
|
||||
|
||||
phys = <&mdss_dsi1_phy>;
|
||||
|
||||
status = "disabled";
|
||||
|
||||
dsi1_opp_table: opp-table {
|
||||
compatible = "operating-points-v2";
|
||||
|
||||
/* TODO: opp-187500000 should work with
|
||||
* &rpmhpd_opp_low_svs, but one some of
|
||||
* sm8350_hdk boards reboot using this
|
||||
* opp.
|
||||
*/
|
||||
opp-187500000 {
|
||||
opp-hz = /bits/ 64 <187500000>;
|
||||
required-opps = <&rpmhpd_opp_svs>;
|
||||
};
|
||||
|
||||
opp-300000000 {
|
||||
opp-hz = /bits/ 64 <300000000>;
|
||||
required-opps = <&rpmhpd_opp_svs>;
|
||||
};
|
||||
|
||||
opp-358000000 {
|
||||
opp-hz = /bits/ 64 <358000000>;
|
||||
required-opps = <&rpmhpd_opp_svs_l1>;
|
||||
};
|
||||
};
|
||||
|
||||
ports {
|
||||
#address-cells = <1>;
|
||||
#size-cells = <0>;
|
||||
|
||||
port@0 {
|
||||
reg = <0>;
|
||||
dsi1_in: endpoint {
|
||||
};
|
||||
};
|
||||
|
||||
port@1 {
|
||||
reg = <1>;
|
||||
dsi1_out: endpoint {
|
||||
};
|
||||
};
|
||||
};
|
||||
};
|
||||
|
||||
mdss_dsi1_phy: phy@ae96400 {
|
||||
compatible = "qcom,dsi-phy-5nm-8350";
|
||||
reg = <0 0x0ae96400 0 0x200>,
|
||||
<0 0x0ae96600 0 0x280>,
|
||||
<0 0x0ae96900 0 0x260>;
|
||||
reg-names = "dsi_phy",
|
||||
"dsi_phy_lane",
|
||||
"dsi_pll";
|
||||
|
||||
#clock-cells = <1>;
|
||||
#phy-cells = <0>;
|
||||
|
||||
clocks = <&dispcc DISP_CC_MDSS_AHB_CLK>,
|
||||
<&rpmhcc RPMH_CXO_CLK>;
|
||||
clock-names = "iface", "ref";
|
||||
|
||||
status = "disabled";
|
||||
};
|
||||
};
|
||||
|
||||
dispcc: clock-controller@af00000 {
|
||||
compatible = "qcom,sm8350-dispcc";
|
||||
reg = <0 0x0af00000 0 0x10000>;
|
||||
clocks = <&rpmhcc RPMH_CXO_CLK>,
|
||||
<0>,
|
||||
<0>,
|
||||
<0>,
|
||||
<0>,
|
||||
<&mdss_dsi0_phy 0>, <&mdss_dsi0_phy 1>,
|
||||
<0>, <0>,
|
||||
<0>,
|
||||
<0>;
|
||||
clock-names = "bi_tcxo",
|
||||
|
||||
Loading…
x
Reference in New Issue
Block a user