staging: comedi: pcl818: convert printk() messages to dev_{level}

Convert the remaining printk messsages in this driver to dev_{level}.

Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
This commit is contained in:
H Hartley Sweeten 2013-11-26 16:42:19 -07:00 committed by Greg Kroah-Hartman
parent e30b22a9cc
commit d65e5b9d91

View File

@ -463,10 +463,10 @@ conv_finish:
outb(0, dev->iobase + PCL818_CLRINT); /* clear INT request */
if ((low & 0xf) != devpriv->act_chanlist[devpriv->act_chanlist_pos]) { /* dropout! */
printk
("comedi: A/D mode1/3 IRQ - channel dropout %x!=%x !\n",
(low & 0xf),
devpriv->act_chanlist[devpriv->act_chanlist_pos]);
dev_dbg(dev->class_dev,
"A/D mode1/3 IRQ - channel dropout %x!=%x !\n",
(low & 0xf),
devpriv->act_chanlist[devpriv->act_chanlist_pos]);
pcl818_ai_cancel(dev, s);
s->async->events |= COMEDI_CB_EOA | COMEDI_CB_ERROR;
comedi_event(dev, s);
@ -532,11 +532,11 @@ static irqreturn_t interrupt_pcl818_ai_mode13_dma(int irq, void *d)
for (i = 0; i < len; i++) {
if ((ptr[bufptr] & 0xf) != devpriv->act_chanlist[devpriv->act_chanlist_pos]) { /* dropout! */
printk
("comedi: A/D mode1/3 DMA - channel dropout %d(card)!=%d(chanlist) at %d !\n",
(ptr[bufptr] & 0xf),
devpriv->act_chanlist[devpriv->act_chanlist_pos],
devpriv->act_chanlist_pos);
dev_dbg(dev->class_dev,
"A/D mode1/3 DMA - channel dropout %d(card)!=%d(chanlist) at %d !\n",
(ptr[bufptr] & 0xf),
devpriv->act_chanlist[devpriv->act_chanlist_pos],
devpriv->act_chanlist_pos);
pcl818_ai_cancel(dev, s);
s->async->events |= COMEDI_CB_EOA | COMEDI_CB_ERROR;
comedi_event(dev, s);
@ -609,10 +609,10 @@ static irqreturn_t interrupt_pcl818_ai_mode13_fifo(int irq, void *d)
for (i = 0; i < len; i++) {
lo = inb(dev->iobase + PCL818_FI_DATALO);
if ((lo & 0xf) != devpriv->act_chanlist[devpriv->act_chanlist_pos]) { /* dropout! */
printk
("comedi: A/D mode1/3 FIFO - channel dropout %d!=%d !\n",
(lo & 0xf),
devpriv->act_chanlist[devpriv->act_chanlist_pos]);
dev_dbg(dev->class_dev,
"A/D mode1/3 FIFO - channel dropout %d!=%d !\n",
(lo & 0xf),
devpriv->act_chanlist[devpriv->act_chanlist_pos]);
pcl818_ai_cancel(dev, s);
s->async->events |= COMEDI_CB_EOA | COMEDI_CB_ERROR;
comedi_event(dev, s);
@ -1249,7 +1249,8 @@ static int pcl818_attach(struct comedi_device *dev, struct comedi_devconfig *it)
if (dma < 1)
goto no_dma; /* DMA disabled */
if (((1 << dma) & board->DMAbits) == 0) {
printk(KERN_ERR "DMA is out of allowed range, FAIL!\n");
dev_err(dev->class_dev,
"DMA is out of allowed range, FAIL!\n");
return -EINVAL; /* Bad DMA */
}
ret = request_dma(dma, dev->board_name);