diff --git a/drivers/gpu/drm/i915/Kconfig.profile b/drivers/gpu/drm/i915/Kconfig.profile index 39328567c200..7cc38d25ee5c 100644 --- a/drivers/gpu/drm/i915/Kconfig.profile +++ b/drivers/gpu/drm/i915/Kconfig.profile @@ -57,10 +57,28 @@ config DRM_I915_PREEMPT_TIMEOUT default 640 # milliseconds help How long to wait (in milliseconds) for a preemption event to occur - when submitting a new context via execlists. If the current context - does not hit an arbitration point and yield to HW before the timer - expires, the HW will be reset to allow the more important context - to execute. + when submitting a new context. If the current context does not hit + an arbitration point and yield to HW before the timer expires, the + HW will be reset to allow the more important context to execute. + + This is adjustable via + /sys/class/drm/card?/engine/*/preempt_timeout_ms + + May be 0 to disable the timeout. + + The compiled in default may get overridden at driver probe time on + certain platforms and certain engines which will be reflected in the + sysfs control. + +config DRM_I915_PREEMPT_TIMEOUT_COMPUTE + int "Preempt timeout for compute engines (ms, jiffy granularity)" + default 7500 # milliseconds + help + How long to wait (in milliseconds) for a preemption event to occur + when submitting a new context to a compute capable engine. If the + current context does not hit an arbitration point and yield to HW + before the timer expires, the HW will be reset to allow the more + important context to execute. This is adjustable via /sys/class/drm/card?/engine/*/preempt_timeout_ms diff --git a/drivers/gpu/drm/i915/gt/intel_engine_cs.c b/drivers/gpu/drm/i915/gt/intel_engine_cs.c index 7c5b33ccedd0..3b7d750ad054 100644 --- a/drivers/gpu/drm/i915/gt/intel_engine_cs.c +++ b/drivers/gpu/drm/i915/gt/intel_engine_cs.c @@ -508,9 +508,14 @@ static int intel_engine_setup(struct intel_gt *gt, enum intel_engine_id id, engine->props.timeslice_duration_ms = CONFIG_DRM_I915_TIMESLICE_DURATION; - /* Override to uninterruptible for OpenCL workloads. */ + /* + * Mid-thread pre-emption is not available in Gen12. Unfortunately, + * some compute workloads run quite long threads. That means they get + * reset due to not pre-empting in a timely manner. So, bump the + * pre-emption timeout value to be much higher for compute engines. + */ if (GRAPHICS_VER(i915) == 12 && (engine->flags & I915_ENGINE_HAS_RCS_REG_STATE)) - engine->props.preempt_timeout_ms = 0; + engine->props.preempt_timeout_ms = CONFIG_DRM_I915_PREEMPT_TIMEOUT_COMPUTE; /* Cap properties according to any system limits */ #define CLAMP_PROP(field) \