phy: ralink: Add PHY driver for MT7621 PCIe PHY
This patch adds a driver for the PCIe PHY of MT7621 SoC. Signed-off-by: Sergio Paracuellos <sergio.paracuellos@gmail.com> Link: https://lore.kernel.org/r/20201121155037.21354-3-sergio.paracuellos@gmail.com Signed-off-by: Vinod Koul <vkoul@kernel.org>
This commit is contained in:
Sergio Paracuellos
Vinod Koul
parent
27076a7358
commit
d87da32372
@ -2,6 +2,14 @@
|
||||
#
|
||||
# PHY drivers for Ralink platforms.
|
||||
#
|
||||
config PHY_MT7621_PCI
|
||||
tristate "MediaTek MT7621 PCI PHY Driver"
|
||||
depends on (RALINK || COMPILE_TEST) && OF
|
||||
select GENERIC_PHY
|
||||
select REGMAP_MMIO
|
||||
help
|
||||
Say 'Y' here to add support for MediaTek MT7621 PCI PHY driver,
|
||||
|
||||
config PHY_RALINK_USB
|
||||
tristate "Ralink USB PHY driver"
|
||||
depends on RALINK || COMPILE_TEST
|
||||
|
||||
@ -1,2 +1,3 @@
|
||||
# SPDX-License-Identifier: GPL-2.0-only
|
||||
obj-$(CONFIG_PHY_MT7621_PCI) += phy-mt7621-pci.o
|
||||
obj-$(CONFIG_PHY_RALINK_USB) += phy-ralink-usb.o
|
||||
|
||||
352
drivers/phy/ralink/phy-mt7621-pci.c
Normal file
352
drivers/phy/ralink/phy-mt7621-pci.c
Normal file
@ -0,0 +1,352 @@
|
||||
// SPDX-License-Identifier: GPL-2.0+
|
||||
/*
|
||||
* Mediatek MT7621 PCI PHY Driver
|
||||
* Author: Sergio Paracuellos <sergio.paracuellos@gmail.com>
|
||||
*/
|
||||
|
||||
#include <dt-bindings/phy/phy.h>
|
||||
#include <linux/bitfield.h>
|
||||
#include <linux/bitops.h>
|
||||
#include <linux/module.h>
|
||||
#include <linux/of_address.h>
|
||||
#include <linux/of_device.h>
|
||||
#include <linux/phy/phy.h>
|
||||
#include <linux/platform_device.h>
|
||||
#include <linux/regmap.h>
|
||||
#include <linux/sys_soc.h>
|
||||
#include <mt7621.h>
|
||||
#include <ralink_regs.h>
|
||||
|
||||
#define RG_PE1_PIPE_REG 0x02c
|
||||
#define RG_PE1_PIPE_RST BIT(12)
|
||||
#define RG_PE1_PIPE_CMD_FRC BIT(4)
|
||||
|
||||
#define RG_P0_TO_P1_WIDTH 0x100
|
||||
#define RG_PE1_H_LCDDS_REG 0x49c
|
||||
#define RG_PE1_H_LCDDS_PCW GENMASK(30, 0)
|
||||
|
||||
#define RG_PE1_FRC_H_XTAL_REG 0x400
|
||||
#define RG_PE1_FRC_H_XTAL_TYPE BIT(8)
|
||||
#define RG_PE1_H_XTAL_TYPE GENMASK(10, 9)
|
||||
|
||||
#define RG_PE1_FRC_PHY_REG 0x000
|
||||
#define RG_PE1_FRC_PHY_EN BIT(4)
|
||||
#define RG_PE1_PHY_EN BIT(5)
|
||||
|
||||
#define RG_PE1_H_PLL_REG 0x490
|
||||
#define RG_PE1_H_PLL_BC GENMASK(23, 22)
|
||||
#define RG_PE1_H_PLL_BP GENMASK(21, 18)
|
||||
#define RG_PE1_H_PLL_IR GENMASK(15, 12)
|
||||
#define RG_PE1_H_PLL_IC GENMASK(11, 8)
|
||||
#define RG_PE1_H_PLL_PREDIV GENMASK(7, 6)
|
||||
#define RG_PE1_PLL_DIVEN GENMASK(3, 1)
|
||||
|
||||
#define RG_PE1_H_PLL_FBKSEL_REG 0x4bc
|
||||
#define RG_PE1_H_PLL_FBKSEL GENMASK(5, 4)
|
||||
|
||||
#define RG_PE1_H_LCDDS_SSC_PRD_REG 0x4a4
|
||||
#define RG_PE1_H_LCDDS_SSC_PRD GENMASK(15, 0)
|
||||
|
||||
#define RG_PE1_H_LCDDS_SSC_DELTA_REG 0x4a8
|
||||
#define RG_PE1_H_LCDDS_SSC_DELTA GENMASK(11, 0)
|
||||
#define RG_PE1_H_LCDDS_SSC_DELTA1 GENMASK(27, 16)
|
||||
|
||||
#define RG_PE1_LCDDS_CLK_PH_INV_REG 0x4a0
|
||||
#define RG_PE1_LCDDS_CLK_PH_INV BIT(5)
|
||||
|
||||
#define RG_PE1_H_PLL_BR_REG 0x4ac
|
||||
#define RG_PE1_H_PLL_BR GENMASK(18, 16)
|
||||
|
||||
#define RG_PE1_MSTCKDIV_REG 0x414
|
||||
#define RG_PE1_MSTCKDIV GENMASK(7, 6)
|
||||
|
||||
#define RG_PE1_FRC_MSTCKDIV BIT(5)
|
||||
|
||||
#define XTAL_MASK GENMASK(7, 6)
|
||||
|
||||
#define MAX_PHYS 2
|
||||
|
||||
/**
|
||||
* struct mt7621_pci_phy - Mt7621 Pcie PHY core
|
||||
* @dev: pointer to device
|
||||
* @regmap: kernel regmap pointer
|
||||
* @phy: pointer to the kernel PHY device
|
||||
* @port_base: base register
|
||||
* @has_dual_port: if the phy has dual ports.
|
||||
* @bypass_pipe_rst: mark if 'mt7621_bypass_pipe_rst'
|
||||
* needs to be executed. Depends on chip revision.
|
||||
*/
|
||||
struct mt7621_pci_phy {
|
||||
struct device *dev;
|
||||
struct regmap *regmap;
|
||||
struct phy *phy;
|
||||
void __iomem *port_base;
|
||||
bool has_dual_port;
|
||||
bool bypass_pipe_rst;
|
||||
};
|
||||
|
||||
static inline void mt7621_phy_rmw(struct mt7621_pci_phy *phy,
|
||||
u32 reg, u32 clr, u32 set)
|
||||
{
|
||||
u32 val;
|
||||
|
||||
/*
|
||||
* We cannot use 'regmap_write_bits' here because internally
|
||||
* 'set' is masked before is set to the value that will be
|
||||
* written to the register. That way results in no reliable
|
||||
* pci setup. Avoid to mask 'set' before set value to 'val'
|
||||
* completely avoid the problem.
|
||||
*/
|
||||
regmap_read(phy->regmap, reg, &val);
|
||||
val &= ~clr;
|
||||
val |= set;
|
||||
regmap_write(phy->regmap, reg, val);
|
||||
}
|
||||
|
||||
static void mt7621_bypass_pipe_rst(struct mt7621_pci_phy *phy)
|
||||
{
|
||||
mt7621_phy_rmw(phy, RG_PE1_PIPE_REG, 0, RG_PE1_PIPE_RST);
|
||||
mt7621_phy_rmw(phy, RG_PE1_PIPE_REG, 0, RG_PE1_PIPE_CMD_FRC);
|
||||
|
||||
if (phy->has_dual_port) {
|
||||
mt7621_phy_rmw(phy, RG_PE1_PIPE_REG + RG_P0_TO_P1_WIDTH,
|
||||
0, RG_PE1_PIPE_RST);
|
||||
mt7621_phy_rmw(phy, RG_PE1_PIPE_REG + RG_P0_TO_P1_WIDTH,
|
||||
0, RG_PE1_PIPE_CMD_FRC);
|
||||
}
|
||||
}
|
||||
|
||||
static void mt7621_set_phy_for_ssc(struct mt7621_pci_phy *phy)
|
||||
{
|
||||
struct device *dev = phy->dev;
|
||||
u32 xtal_mode;
|
||||
|
||||
xtal_mode = FIELD_GET(XTAL_MASK, rt_sysc_r32(SYSC_REG_SYSTEM_CONFIG0));
|
||||
|
||||
/* Set PCIe Port PHY to disable SSC */
|
||||
/* Debug Xtal Type */
|
||||
mt7621_phy_rmw(phy, RG_PE1_FRC_H_XTAL_REG,
|
||||
RG_PE1_FRC_H_XTAL_TYPE | RG_PE1_H_XTAL_TYPE,
|
||||
RG_PE1_FRC_H_XTAL_TYPE |
|
||||
FIELD_PREP(RG_PE1_H_XTAL_TYPE, 0x00));
|
||||
|
||||
/* disable port */
|
||||
mt7621_phy_rmw(phy, RG_PE1_FRC_PHY_REG, RG_PE1_PHY_EN,
|
||||
RG_PE1_FRC_PHY_EN);
|
||||
|
||||
if (phy->has_dual_port) {
|
||||
mt7621_phy_rmw(phy, RG_PE1_FRC_PHY_REG + RG_P0_TO_P1_WIDTH,
|
||||
RG_PE1_PHY_EN, RG_PE1_FRC_PHY_EN);
|
||||
}
|
||||
|
||||
if (xtal_mode <= 5 && xtal_mode >= 3) { /* 40MHz Xtal */
|
||||
/* Set Pre-divider ratio (for host mode) */
|
||||
mt7621_phy_rmw(phy, RG_PE1_H_PLL_REG, RG_PE1_H_PLL_PREDIV,
|
||||
FIELD_PREP(RG_PE1_H_PLL_PREDIV, 0x01));
|
||||
|
||||
dev_dbg(dev, "Xtal is 40MHz\n");
|
||||
} else if (xtal_mode >= 6) { /* 25MHz Xal */
|
||||
mt7621_phy_rmw(phy, RG_PE1_H_PLL_REG, RG_PE1_H_PLL_PREDIV,
|
||||
FIELD_PREP(RG_PE1_H_PLL_PREDIV, 0x00));
|
||||
|
||||
/* Select feedback clock */
|
||||
mt7621_phy_rmw(phy, RG_PE1_H_PLL_FBKSEL_REG,
|
||||
RG_PE1_H_PLL_FBKSEL,
|
||||
FIELD_PREP(RG_PE1_H_PLL_FBKSEL, 0x01));
|
||||
|
||||
/* DDS NCPO PCW (for host mode) */
|
||||
mt7621_phy_rmw(phy, RG_PE1_H_LCDDS_SSC_PRD_REG,
|
||||
RG_PE1_H_LCDDS_SSC_PRD,
|
||||
FIELD_PREP(RG_PE1_H_LCDDS_SSC_PRD, 0x00));
|
||||
|
||||
/* DDS SSC dither period control */
|
||||
mt7621_phy_rmw(phy, RG_PE1_H_LCDDS_SSC_PRD_REG,
|
||||
RG_PE1_H_LCDDS_SSC_PRD,
|
||||
FIELD_PREP(RG_PE1_H_LCDDS_SSC_PRD, 0x18d));
|
||||
|
||||
/* DDS SSC dither amplitude control */
|
||||
mt7621_phy_rmw(phy, RG_PE1_H_LCDDS_SSC_DELTA_REG,
|
||||
RG_PE1_H_LCDDS_SSC_DELTA |
|
||||
RG_PE1_H_LCDDS_SSC_DELTA1,
|
||||
FIELD_PREP(RG_PE1_H_LCDDS_SSC_DELTA, 0x4a) |
|
||||
FIELD_PREP(RG_PE1_H_LCDDS_SSC_DELTA1, 0x4a));
|
||||
|
||||
dev_dbg(dev, "Xtal is 25MHz\n");
|
||||
} else { /* 20MHz Xtal */
|
||||
mt7621_phy_rmw(phy, RG_PE1_H_PLL_REG, RG_PE1_H_PLL_PREDIV,
|
||||
FIELD_PREP(RG_PE1_H_PLL_PREDIV, 0x00));
|
||||
|
||||
dev_dbg(dev, "Xtal is 20MHz\n");
|
||||
}
|
||||
|
||||
/* DDS clock inversion */
|
||||
mt7621_phy_rmw(phy, RG_PE1_LCDDS_CLK_PH_INV_REG,
|
||||
RG_PE1_LCDDS_CLK_PH_INV, RG_PE1_LCDDS_CLK_PH_INV);
|
||||
|
||||
/* Set PLL bits */
|
||||
mt7621_phy_rmw(phy, RG_PE1_H_PLL_REG,
|
||||
RG_PE1_H_PLL_BC | RG_PE1_H_PLL_BP | RG_PE1_H_PLL_IR |
|
||||
RG_PE1_H_PLL_IC | RG_PE1_PLL_DIVEN,
|
||||
FIELD_PREP(RG_PE1_H_PLL_BC, 0x02) |
|
||||
FIELD_PREP(RG_PE1_H_PLL_BP, 0x06) |
|
||||
FIELD_PREP(RG_PE1_H_PLL_IR, 0x02) |
|
||||
FIELD_PREP(RG_PE1_H_PLL_IC, 0x01) |
|
||||
FIELD_PREP(RG_PE1_PLL_DIVEN, 0x02));
|
||||
|
||||
mt7621_phy_rmw(phy, RG_PE1_H_PLL_BR_REG, RG_PE1_H_PLL_BR,
|
||||
FIELD_PREP(RG_PE1_H_PLL_BR, 0x00));
|
||||
|
||||
if (xtal_mode <= 5 && xtal_mode >= 3) { /* 40MHz Xtal */
|
||||
/* set force mode enable of da_pe1_mstckdiv */
|
||||
mt7621_phy_rmw(phy, RG_PE1_MSTCKDIV_REG,
|
||||
RG_PE1_MSTCKDIV | RG_PE1_FRC_MSTCKDIV,
|
||||
FIELD_PREP(RG_PE1_MSTCKDIV, 0x01) |
|
||||
RG_PE1_FRC_MSTCKDIV);
|
||||
}
|
||||
}
|
||||
|
||||
static int mt7621_pci_phy_init(struct phy *phy)
|
||||
{
|
||||
struct mt7621_pci_phy *mphy = phy_get_drvdata(phy);
|
||||
|
||||
if (mphy->bypass_pipe_rst)
|
||||
mt7621_bypass_pipe_rst(mphy);
|
||||
|
||||
mt7621_set_phy_for_ssc(mphy);
|
||||
|
||||
return 0;
|
||||
}
|
||||
|
||||
static int mt7621_pci_phy_power_on(struct phy *phy)
|
||||
{
|
||||
struct mt7621_pci_phy *mphy = phy_get_drvdata(phy);
|
||||
|
||||
/* Enable PHY and disable force mode */
|
||||
mt7621_phy_rmw(mphy, RG_PE1_FRC_PHY_REG,
|
||||
RG_PE1_FRC_PHY_EN, RG_PE1_PHY_EN);
|
||||
|
||||
if (mphy->has_dual_port) {
|
||||
mt7621_phy_rmw(mphy, RG_PE1_FRC_PHY_REG + RG_P0_TO_P1_WIDTH,
|
||||
RG_PE1_FRC_PHY_EN, RG_PE1_PHY_EN);
|
||||
}
|
||||
|
||||
return 0;
|
||||
}
|
||||
|
||||
static int mt7621_pci_phy_power_off(struct phy *phy)
|
||||
{
|
||||
struct mt7621_pci_phy *mphy = phy_get_drvdata(phy);
|
||||
|
||||
/* Disable PHY */
|
||||
mt7621_phy_rmw(mphy, RG_PE1_FRC_PHY_REG,
|
||||
RG_PE1_PHY_EN, RG_PE1_FRC_PHY_EN);
|
||||
|
||||
if (mphy->has_dual_port) {
|
||||
mt7621_phy_rmw(mphy, RG_PE1_FRC_PHY_REG + RG_P0_TO_P1_WIDTH,
|
||||
RG_PE1_PHY_EN, RG_PE1_FRC_PHY_EN);
|
||||
}
|
||||
|
||||
return 0;
|
||||
}
|
||||
|
||||
static int mt7621_pci_phy_exit(struct phy *phy)
|
||||
{
|
||||
return 0;
|
||||
}
|
||||
|
||||
static const struct phy_ops mt7621_pci_phy_ops = {
|
||||
.init = mt7621_pci_phy_init,
|
||||
.exit = mt7621_pci_phy_exit,
|
||||
.power_on = mt7621_pci_phy_power_on,
|
||||
.power_off = mt7621_pci_phy_power_off,
|
||||
.owner = THIS_MODULE,
|
||||
};
|
||||
|
||||
static struct phy *mt7621_pcie_phy_of_xlate(struct device *dev,
|
||||
struct of_phandle_args *args)
|
||||
{
|
||||
struct mt7621_pci_phy *mt7621_phy = dev_get_drvdata(dev);
|
||||
|
||||
if (WARN_ON(args->args[0] >= MAX_PHYS))
|
||||
return ERR_PTR(-ENODEV);
|
||||
|
||||
mt7621_phy->has_dual_port = args->args[0];
|
||||
|
||||
dev_info(dev, "PHY for 0x%08x (dual port = %d)\n",
|
||||
(unsigned int)mt7621_phy->port_base, mt7621_phy->has_dual_port);
|
||||
|
||||
return mt7621_phy->phy;
|
||||
}
|
||||
|
||||
static const struct soc_device_attribute mt7621_pci_quirks_match[] = {
|
||||
{ .soc_id = "mt7621", .revision = "E2" }
|
||||
};
|
||||
|
||||
static const struct regmap_config mt7621_pci_phy_regmap_config = {
|
||||
.reg_bits = 32,
|
||||
.val_bits = 32,
|
||||
.reg_stride = 4,
|
||||
.max_register = 0x700,
|
||||
};
|
||||
|
||||
static int mt7621_pci_phy_probe(struct platform_device *pdev)
|
||||
{
|
||||
struct device *dev = &pdev->dev;
|
||||
const struct soc_device_attribute *attr;
|
||||
struct phy_provider *provider;
|
||||
struct mt7621_pci_phy *phy;
|
||||
|
||||
phy = devm_kzalloc(dev, sizeof(*phy), GFP_KERNEL);
|
||||
if (!phy)
|
||||
return -ENOMEM;
|
||||
|
||||
attr = soc_device_match(mt7621_pci_quirks_match);
|
||||
if (attr)
|
||||
phy->bypass_pipe_rst = true;
|
||||
|
||||
phy->dev = dev;
|
||||
platform_set_drvdata(pdev, phy);
|
||||
|
||||
phy->port_base = devm_platform_ioremap_resource(pdev, 0);
|
||||
if (IS_ERR(phy->port_base)) {
|
||||
dev_err(dev, "failed to remap phy regs\n");
|
||||
return PTR_ERR(phy->port_base);
|
||||
}
|
||||
|
||||
phy->regmap = devm_regmap_init_mmio(phy->dev, phy->port_base,
|
||||
&mt7621_pci_phy_regmap_config);
|
||||
if (IS_ERR(phy->regmap))
|
||||
return PTR_ERR(phy->regmap);
|
||||
|
||||
phy->phy = devm_phy_create(dev, dev->of_node, &mt7621_pci_phy_ops);
|
||||
if (IS_ERR(phy)) {
|
||||
dev_err(dev, "failed to create phy\n");
|
||||
return PTR_ERR(phy);
|
||||
}
|
||||
|
||||
phy_set_drvdata(phy->phy, phy);
|
||||
|
||||
provider = devm_of_phy_provider_register(dev, mt7621_pcie_phy_of_xlate);
|
||||
|
||||
return PTR_ERR_OR_ZERO(provider);
|
||||
}
|
||||
|
||||
static const struct of_device_id mt7621_pci_phy_ids[] = {
|
||||
{ .compatible = "mediatek,mt7621-pci-phy" },
|
||||
{},
|
||||
};
|
||||
MODULE_DEVICE_TABLE(of, mt7621_pci_ids);
|
||||
|
||||
static struct platform_driver mt7621_pci_phy_driver = {
|
||||
.probe = mt7621_pci_phy_probe,
|
||||
.driver = {
|
||||
.name = "mt7621-pci-phy",
|
||||
.of_match_table = of_match_ptr(mt7621_pci_phy_ids),
|
||||
},
|
||||
};
|
||||
|
||||
builtin_platform_driver(mt7621_pci_phy_driver);
|
||||
|
||||
MODULE_AUTHOR("Sergio Paracuellos <sergio.paracuellos@gmail.com>");
|
||||
MODULE_DESCRIPTION("MediaTek MT7621 PCIe PHY driver");
|
||||
MODULE_LICENSE("GPL v2");
|
||||
Loading…
Reference in New Issue
Block a user