From 82099d76cb6ff6738306e90e816754a5d6b046ce Mon Sep 17 00:00:00 2001 From: Oskar Senft Date: Thu, 4 Nov 2021 23:29:10 -0400 Subject: [PATCH 01/17] ARM: dts: aspeed: tyan-s7106: Update nct7802 config This change updates the configuration for the nct7802 hardware monitor to correctly configure its temperature sensors. Signed-off-by: Oskar Senft Link: https://lore.kernel.org/r/20211105032910.446492-1-osk@google.com Signed-off-by: Joel Stanley --- arch/arm/boot/dts/aspeed-bmc-tyan-s7106.dts | 24 +++++++++++++++++++++ 1 file changed, 24 insertions(+) diff --git a/arch/arm/boot/dts/aspeed-bmc-tyan-s7106.dts b/arch/arm/boot/dts/aspeed-bmc-tyan-s7106.dts index 68f332ee1886..60ac6d3f03b5 100644 --- a/arch/arm/boot/dts/aspeed-bmc-tyan-s7106.dts +++ b/arch/arm/boot/dts/aspeed-bmc-tyan-s7106.dts @@ -213,6 +213,30 @@ nct7802@28 { compatible = "nuvoton,nct7802"; reg = <0x28>; + + #address-cells = <1>; + #size-cells = <0>; + + channel@0 { /* LTD */ + reg = <0>; + }; + + channel@1 { /* RTD1 */ + reg = <1>; + sensor-type = "temperature"; + temperature-mode = "thermistor"; + }; + + channel@2 { /* RTD2 */ + reg = <2>; + sensor-type = "temperature"; + temperature-mode = "thermistor"; + }; + + channel@3 { /* RTD3 */ + reg = <3>; + sensor-type = "temperature"; + }; }; /* Also connected to: From 8189162c66b7bc2d91224269b472aae57fc699e1 Mon Sep 17 00:00:00 2001 From: Quan Nguyen Date: Tue, 19 Oct 2021 13:01:54 +0700 Subject: [PATCH 02/17] ARM: dts: aspeed: mtjade: Add I2C buses for NVMe devices This commit adds configuration i2c busses for 24 NVMe slots and 2 M2 NVMe slots found on Mt.Jade hardware reference platform with Ampere's Altra processor family. Signed-off-by: Quan Nguyen Reviewed-by: Joel Stanley Link: https://lore.kernel.org/r/20211019060155.945-3-quan@os.amperecomputing.com Signed-off-by: Joel Stanley --- .../arm/boot/dts/aspeed-bmc-ampere-mtjade.dts | 258 ++++++++++++++++++ 1 file changed, 258 insertions(+) diff --git a/arch/arm/boot/dts/aspeed-bmc-ampere-mtjade.dts b/arch/arm/boot/dts/aspeed-bmc-ampere-mtjade.dts index 3515d55bd312..723c7063c223 100644 --- a/arch/arm/boot/dts/aspeed-bmc-ampere-mtjade.dts +++ b/arch/arm/boot/dts/aspeed-bmc-ampere-mtjade.dts @@ -7,6 +7,50 @@ model = "Ampere Mt. Jade BMC"; compatible = "ampere,mtjade-bmc", "aspeed,ast2500"; + aliases { + /* + * i2c bus 50-57 assigned to NVMe slot 0-7 + */ + i2c50 = &nvmeslot_0; + i2c51 = &nvmeslot_1; + i2c52 = &nvmeslot_2; + i2c53 = &nvmeslot_3; + i2c54 = &nvmeslot_4; + i2c55 = &nvmeslot_5; + i2c56 = &nvmeslot_6; + i2c57 = &nvmeslot_7; + + /* + * i2c bus 60-67 assigned to NVMe slot 8-15 + */ + i2c60 = &nvmeslot_8; + i2c61 = &nvmeslot_9; + i2c62 = &nvmeslot_10; + i2c63 = &nvmeslot_11; + i2c64 = &nvmeslot_12; + i2c65 = &nvmeslot_13; + i2c66 = &nvmeslot_14; + i2c67 = &nvmeslot_15; + + /* + * i2c bus 70-77 assigned to NVMe slot 16-23 + */ + i2c70 = &nvmeslot_16; + i2c71 = &nvmeslot_17; + i2c72 = &nvmeslot_18; + i2c73 = &nvmeslot_19; + i2c74 = &nvmeslot_20; + i2c75 = &nvmeslot_21; + i2c76 = &nvmeslot_22; + i2c77 = &nvmeslot_23; + + /* + * i2c bus 80-81 assigned to NVMe M2 slot 0-1 + */ + i2c80 = &nvme_m2_0; + i2c81 = &nvme_m2_1; + }; + chosen { stdout-path = &uart5; bootargs = "console=ttyS4,115200 earlycon"; @@ -445,6 +489,220 @@ &i2c5 { status = "okay"; + i2c-mux@70 { + compatible = "nxp,pca9548"; + #address-cells = <1>; + #size-cells = <0>; + reg = <0x70>; + i2c-mux-idle-disconnect; + + nvmeslot_0_7: i2c@3 { + #address-cells = <1>; + #size-cells = <0>; + reg = <0x3>; + }; + }; + + i2c-mux@71 { + compatible = "nxp,pca9548"; + #address-cells = <1>; + #size-cells = <0>; + reg = <0x71>; + i2c-mux-idle-disconnect; + + nvmeslot_8_15: i2c@4 { + #address-cells = <1>; + #size-cells = <0>; + reg = <0x4>; + }; + + nvmeslot_16_23: i2c@3 { + #address-cells = <1>; + #size-cells = <0>; + reg = <0x3>; + }; + + }; + + i2c-mux@72 { + compatible = "nxp,pca9545"; + #address-cells = <1>; + #size-cells = <0>; + reg = <0x72>; + i2c-mux-idle-disconnect; + + nvme_m2_0: i2c@0 { + #address-cells = <1>; + #size-cells = <0>; + reg = <0x0>; + }; + + nvme_m2_1: i2c@1 { + #address-cells = <1>; + #size-cells = <0>; + reg = <0x1>; + }; + }; +}; + +&nvmeslot_0_7 { + status = "okay"; + + i2c-mux@75 { + compatible = "nxp,pca9548"; + #address-cells = <1>; + #size-cells = <0>; + reg = <0x75>; + i2c-mux-idle-disconnect; + + nvmeslot_0: i2c@0 { + #address-cells = <1>; + #size-cells = <0>; + reg = <0x0>; + }; + nvmeslot_1: i2c@1 { + #address-cells = <1>; + #size-cells = <0>; + reg = <0x1>; + }; + nvmeslot_2: i2c@2 { + #address-cells = <1>; + #size-cells = <0>; + reg = <0x2>; + }; + nvmeslot_3: i2c@3 { + #address-cells = <1>; + #size-cells = <0>; + reg = <0x3>; + }; + nvmeslot_4: i2c@4 { + #address-cells = <1>; + #size-cells = <0>; + reg = <0x4>; + }; + nvmeslot_5: i2c@5 { + #address-cells = <1>; + #size-cells = <0>; + reg = <0x5>; + }; + nvmeslot_6: i2c@6 { + #address-cells = <1>; + #size-cells = <0>; + reg = <0x6>; + }; + nvmeslot_7: i2c@7 { + #address-cells = <1>; + #size-cells = <0>; + reg = <0x7>; + }; + + }; +}; + +&nvmeslot_8_15 { + status = "okay"; + + i2c-mux@75 { + compatible = "nxp,pca9548"; + #address-cells = <1>; + #size-cells = <0>; + reg = <0x75>; + i2c-mux-idle-disconnect; + + nvmeslot_8: i2c@0 { + #address-cells = <1>; + #size-cells = <0>; + reg = <0x0>; + }; + nvmeslot_9: i2c@1 { + #address-cells = <1>; + #size-cells = <0>; + reg = <0x1>; + }; + nvmeslot_10: i2c@2 { + #address-cells = <1>; + #size-cells = <0>; + reg = <0x2>; + }; + nvmeslot_11: i2c@3 { + #address-cells = <1>; + #size-cells = <0>; + reg = <0x3>; + }; + nvmeslot_12: i2c@4 { + #address-cells = <1>; + #size-cells = <0>; + reg = <0x4>; + }; + nvmeslot_13: i2c@5 { + #address-cells = <1>; + #size-cells = <0>; + reg = <0x5>; + }; + nvmeslot_14: i2c@6 { + #address-cells = <1>; + #size-cells = <0>; + reg = <0x6>; + }; + nvmeslot_15: i2c@7 { + #address-cells = <1>; + #size-cells = <0>; + reg = <0x7>; + }; + }; +}; + +&nvmeslot_16_23 { + status = "okay"; + + i2c-mux@75 { + compatible = "nxp,pca9548"; + #address-cells = <1>; + #size-cells = <0>; + reg = <0x75>; + i2c-mux-idle-disconnect; + + nvmeslot_16: i2c@0 { + #address-cells = <1>; + #size-cells = <0>; + reg = <0x0>; + }; + nvmeslot_17: i2c@1 { + #address-cells = <1>; + #size-cells = <0>; + reg = <0x1>; + }; + nvmeslot_18: i2c@2 { + #address-cells = <1>; + #size-cells = <0>; + reg = <0x2>; + }; + nvmeslot_19: i2c@3 { + #address-cells = <1>; + #size-cells = <0>; + reg = <0x3>; + }; + nvmeslot_20: i2c@4 { + #address-cells = <1>; + #size-cells = <0>; + reg = <0x4>; + }; + nvmeslot_21: i2c@5 { + #address-cells = <1>; + #size-cells = <0>; + reg = <0x5>; + }; + nvmeslot_22: i2c@6 { + #address-cells = <1>; + #size-cells = <0>; + reg = <0x6>; + }; + nvmeslot_23: i2c@7 { + #address-cells = <1>; + #size-cells = <0>; + reg = <0x7>; + }; + }; }; &i2c6 { From 16d6dc8d8030dfe88104616cd3dea4e055af506d Mon Sep 17 00:00:00 2001 From: Quan Nguyen Date: Tue, 19 Oct 2021 13:01:55 +0700 Subject: [PATCH 03/17] ARM: dts: aspeed: mtjade: Add uefi partition Add SPI NOR partition for uefi. Signed-off-by: Thang Q. Nguyen Signed-off-by: Quan Nguyen Reviewed-by: Joel Stanley Link: https://lore.kernel.org/r/20211019060155.945-4-quan@os.amperecomputing.com Signed-off-by: Joel Stanley --- arch/arm/boot/dts/aspeed-bmc-ampere-mtjade.dts | 9 +++++++++ 1 file changed, 9 insertions(+) diff --git a/arch/arm/boot/dts/aspeed-bmc-ampere-mtjade.dts b/arch/arm/boot/dts/aspeed-bmc-ampere-mtjade.dts index 723c7063c223..4c3c3f1a12ea 100644 --- a/arch/arm/boot/dts/aspeed-bmc-ampere-mtjade.dts +++ b/arch/arm/boot/dts/aspeed-bmc-ampere-mtjade.dts @@ -374,6 +374,15 @@ m25p,fast-read; label = "pnor"; /* spi-max-frequency = <100000000>; */ + partitions { + compatible = "fixed-partitions"; + #address-cells = <1>; + #size-cells = <1>; + uefi@400000 { + reg = <0x400000 0x1C00000>; + label = "pnor-uefi"; + }; + }; }; }; From 1bf6751c8d8e2989b7b8611080b3b3b1bc0b83f4 Mon Sep 17 00:00:00 2001 From: Andrei Kartashev Date: Fri, 19 Nov 2021 15:00:56 +0300 Subject: [PATCH 04/17] dt-bindings: vendor-prefixes: add YADRO Add vendor prefix for YADRO (https://www.yadro.com/) Signed-off-by: Andrei Kartashev Acked-by: Rob Herring Link: https://lore.kernel.org/r/20211119120057.12118-2-a.kartashev@yadro.com Signed-off-by: Joel Stanley --- Documentation/devicetree/bindings/vendor-prefixes.yaml | 2 ++ 1 file changed, 2 insertions(+) diff --git a/Documentation/devicetree/bindings/vendor-prefixes.yaml b/Documentation/devicetree/bindings/vendor-prefixes.yaml index 66d6432fd781..f0cb7dd11698 100644 --- a/Documentation/devicetree/bindings/vendor-prefixes.yaml +++ b/Documentation/devicetree/bindings/vendor-prefixes.yaml @@ -1350,6 +1350,8 @@ patternProperties: description: Shenzhen Xunlong Software CO.,Limited "^xylon,.*": description: Xylon + "^yadro,.*": + description: YADRO "^yamaha,.*": description: Yamaha Corporation "^yes-optoelectronics,.*": From 67ac01d03862b274d4ca3fa76092e96b00f478af Mon Sep 17 00:00:00 2001 From: Andrei Kartashev Date: Fri, 19 Nov 2021 15:00:57 +0300 Subject: [PATCH 05/17] ARM: dts: aspeed: add device tree for YADRO VEGMAN BMC YADRO VEGMAN is x86 based servers family with ASPEED AST2500-based BMC. Currently there are three models: * VEGMAN N110 * VEGMAN S220/320 * VEGMAN R120/220 The dts files provides configuration for BMC system. Signed-off-by: Andrei Kartashev Link: https://lore.kernel.org/r/20211119120057.12118-3-a.kartashev@yadro.com Reviewed-by: Joel Stanley Signed-off-by: Joel Stanley --- arch/arm/boot/dts/Makefile | 5 +- arch/arm/boot/dts/aspeed-bmc-vegman-n110.dts | 149 +++++++++ arch/arm/boot/dts/aspeed-bmc-vegman-rx20.dts | 255 +++++++++++++++ arch/arm/boot/dts/aspeed-bmc-vegman-sx20.dts | 154 +++++++++ arch/arm/boot/dts/aspeed-bmc-vegman.dtsi | 311 +++++++++++++++++++ 5 files changed, 873 insertions(+), 1 deletion(-) create mode 100644 arch/arm/boot/dts/aspeed-bmc-vegman-n110.dts create mode 100644 arch/arm/boot/dts/aspeed-bmc-vegman-rx20.dts create mode 100644 arch/arm/boot/dts/aspeed-bmc-vegman-sx20.dts create mode 100644 arch/arm/boot/dts/aspeed-bmc-vegman.dtsi diff --git a/arch/arm/boot/dts/Makefile b/arch/arm/boot/dts/Makefile index 0de64f237cd8..78b71e02624c 100644 --- a/arch/arm/boot/dts/Makefile +++ b/arch/arm/boot/dts/Makefile @@ -1519,4 +1519,7 @@ dtb-$(CONFIG_ARCH_ASPEED) += \ aspeed-bmc-quanta-q71l.dtb \ aspeed-bmc-supermicro-x11spi.dtb \ aspeed-bmc-inventec-transformers.dtb \ - aspeed-bmc-tyan-s7106.dtb + aspeed-bmc-tyan-s7106.dtb \ + aspeed-bmc-vegman-n110.dtb \ + aspeed-bmc-vegman-rx20.dtb \ + aspeed-bmc-vegman-sx20.dtb diff --git a/arch/arm/boot/dts/aspeed-bmc-vegman-n110.dts b/arch/arm/boot/dts/aspeed-bmc-vegman-n110.dts new file mode 100644 index 000000000000..24319267d550 --- /dev/null +++ b/arch/arm/boot/dts/aspeed-bmc-vegman-n110.dts @@ -0,0 +1,149 @@ +// SPDX-License-Identifier: GPL-2.0+ +// Copyright (C) 2021 YADRO +/dts-v1/; + +#include "aspeed-bmc-vegman.dtsi" + +/ { + model = "YADRO VEGMAN N110 BMC"; + compatible = "yadro,vegman-n110-bmc", "aspeed,ast2500"; +}; + +&gpio { + status = "okay"; + gpio-line-names = + /*A0-A7*/ "CHASSIS_INTRUSION","CASE_OPEN_FAULT_RST","","","SPEAKER_BMC","FM_FORCE_BMC_UPDATE","","", + /*B0-B7*/ "","","","","","","","", + /*C0-C7*/ "","","","","","","","", + /*D0-D7*/ "","","","","","","","", + /*E0-E7*/ "RESET_BUTTON","RESET_OUT","POWER_BUTTON","POWER_OUT","","","","", + /*F0-F7*/ "NMI_OUT","PCIE_NIC_ALERT","","","SKT0_FAULT_LED","","RST_RGMII_PHYRST_DNP","", + /*G0-G7*/ "CPU_ERR2","CPU_CATERR","PCH_BMC_THERMTRIP","","IRQ_NMI_EVENT","","","", + /*H0-H7*/ "PWRGD_P3V3_RISER1","PWRGD_P3V3_RISER2","PWRGD_P3V3_RISER3","","MIO_BIOS_SEL","_SPI_FLASH_HOLD","_SPI_FLASH_WP","FM_240VA_STATUS", + /*I0-I7*/ "","","","","","","","", + /*J0-J7*/ "","","","","","","","", + /*K0-K7*/ "","","","","","","","", + /*L0-L7*/ "","","","","","","","", + /*M0-M7*/ "","","","","","","","", + /*N0-N7*/ "","","","","","","","", + /*O0-O7*/ "","","","","","","","_SPI2_BMC_CS_SEL", + /*P0-P7*/ "","","","","","","","", + /*Q0-Q7*/ "","","","","","","","", + /*R0-R7*/ "_SPI_RMM4_LITE_CS","","","","","","","", + /*S0-S7*/ "_SPI2_BMC_CS1","","","IRQ_SML0_ALERT_MUX","FP_LED_STATUS_GREEN","FP_LED_STATUS_AMBER","FP_ID_LED","", + /*T0-T7*/ "","","","","","","","", + /*U0-U7*/ "","","","","","","","", + /*V0-V7*/ "","","","","","","","", + /*W0-W7*/ "","","","","","","","", + /*X0-X7*/ "","","","","","","","", + /*Y0-Y7*/ "SIO_S3","SIO_S5","","SIO_ONCONTROL","","","","", + /*Z0-Z7*/ "FM_BMC_PWR_BTN","SIO_POWER_GOOD","FM_BMC_PWRBTN_OUT","FM_BMC_PCH_SCI_LPC","","","","", + /*AA0-AA7*/ "","IRQ_SML1_PMBUS_ALERT","FM_PVCCIN_CPU0_PWR_IN_ALERT","FM_PVCCIN_CPU1_PWR_IN_ALERT","BMC_SYS_PWR_FAULT","BMC_SYS_PWR_OK","SMI","POST_COMPLETE", + /*AB0-AB7*/ "FM_CPU_BMCINIT","NMI_BUTTON","ID_BUTTON","PS_PWROK","","","","", + /*AC0-AC7*/ "","","","","","","",""; +}; + +&sgpio { + ngpios = <80>; + bus-frequency = <2000000>; + status = "okay"; + /* SGPIO lines. even: input, odd: output */ + gpio-line-names = + /*A0-A7*/ "CPU1_PRESENCE","","CPU1_THERMTRIP","","CPU1_VRHOT","","CPU1_FIVR_FAULT","","CPU1_MEM_ABCD_VRHOT","","CPU1_MEM_EFGH_VRHOT","","","","","", + /*B0-B7*/ "CPU1_MISMATCH","","CPU1_MEM_THERM_EVENT","","CPU2_PRESENCE","","CPU2_THERMTRIP","","CPU2_VRHOT","","CPU2_FIVR_FAULT","","CPU2_MEM_ABCD_VRHOT","","CPU2_MEM_EFGH_VRHOT","", + /*C0-C7*/ "","","","","CPU2_MISMATCH","","CPU2_MEM_THERM_EVENT","","","","","","","","","", + /*D0-D7*/ "","","","","","","","","","","","","","","","", + /*E0-E7*/ "","","","","","","","","","","","","","","","", + /*F0-F7*/ "SGPIO_PLD_MINOR_REV_BIT0","","SGPIO_PLD_MINOR_REV_BIT1","","SGPIO_PLD_MINOR_REV_BIT2","","SGPIO_PLD_MINOR_REV_BIT3","","SGPIO_PLD_MAJOR_REV_BIT0","","SGPIO_PLD_MAJOR_REV_BIT1","","SGPIO_PLD_MAJOR_REV_BIT2","","SGPIO_PLD_MAJOR_REV_BIT3","", + /*G0-G7*/ "MAIN_PLD_MINOR_REV_BIT0","","MAIN_PLD_MINOR_REV_BIT1","","MAIN_PLD_MINOR_REV_BIT2","","MAIN_PLD_MINOR_REV_BIT3","","MAIN_PLD_MAJOR_REV_BIT0","","MAIN_PLD_MAJOR_REV_BIT1","","MAIN_PLD_MAJOR_REV_BIT2","","MAIN_PLD_MAJOR_REV_BIT3","", + /*H0-H7*/ "","","","","","","","","","","","","","","","", + /*I0-I7*/ "","","","","","","","","","","","","","","","", + /*J0-J7*/ "","","","","","","","","","","","","","","",""; +}; + +&i2c11 { + /* SMB_BMC_MGMT_LVC3 */ + gpio@21 { + compatible = "nxp,pcal9535"; + reg = <0x21>; + gpio-controller; + #gpio-cells = <2>; + gpio-line-names = + /*IO0.0-0.7*/ "", "", "", "", "", "", "PE_PCH_SCR_CLKREQ", "", + /*IO1.0-1.7*/ "", "PE_PCH_MEZ_PRSNT", "PE_PCH_MEZ_PRSNT_", "NIC_4_PE_PRSNT", "NIC_3_PE_PRSNT", "NIC_2_PE_PRSNT", "NIC_1_PE_PRSNT", ""; + }; + gpio@27 { + compatible = "nxp,pca9698"; + reg = <0x27>; + gpio-controller; + #gpio-cells = <2>; + gpio-line-names = + /*IO0.0-0.7*/ "PWRGD_PS_PWROK", "PWRGD_DSW_PWROK", "PWRGD_P5V_AUX", "PWRGD_P3V3_AUX", "PWRGD_P5V", "PWRGD_P3V3", "PWRGD_P1V8_PCH_AUX", "PWRGD_PCH_PVNN_AUX", + /*IO1.0-1.7*/ "PWRGD_P1V05_PCH_AUX", "PWRGD_PCH_AUX_VRS", "PWRGD_PVCCIN_CPU0", "PWRGD_PVCCSA_CPU0", "PWRGD_PVCCIO_CPU0", "PWRGD_PVMCP_CPU0", "PWRGD_P1V0_CPU0", "PWRGD_PVDDQ_ABC_CPU0", + /*IO2.0-2.7*/ "PWRGD_PVPP_ABC_CPU0", "PWRGD_PVTT_ABC_CPU0", "PWRGD_PVDDQ_DEF_CPU0", "PWRGD_PVPP_DEF_CPU0", "PWRGD_PVTT_DEF_CPU0", "", "", "", + /*IO3.0-3.7*/ "", "", "", "", "", "", "", "", + /*IO4.0-4.7*/ "", "", "", "", "", "", "", ""; + }; +}; + +&i2c13 { + /* SMB_PCIE2_STBY_LVC3 */ + mux-expa@73 { + compatible = "nxp,pca9545"; + reg = <0x73>; + #address-cells = <1>; + #size-cells = <0>; + i2c-mux-idle-disconnect; + }; + mux-sata@71 { + compatible = "nxp,pca9543"; + reg = <0x71>; + #address-cells = <1>; + #size-cells = <0>; + i2c-mux-idle-disconnect; + }; +}; + +&i2c2 { + /* SMB_PCIE_STBY_LVC3 */ + mux-expb@71 { + compatible = "nxp,pca9545"; + reg = <0x71>; + #address-cells = <1>; + #size-cells = <0>; + i2c-mux-idle-disconnect; + }; +}; + +&pwm_tacho { + status = "okay"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_pwm0_default &pinctrl_pwm1_default + &pinctrl_pwm2_default &pinctrl_pwm3_default + &pinctrl_pwm4_default &pinctrl_pwm5_default>; + + fan@0 { + reg = <0x00>; + aspeed,fan-tach-ch = /bits/ 8 <0x00 0x06>; + }; + fan@1 { + reg = <0x01>; + aspeed,fan-tach-ch = /bits/ 8 <0x01 0x08>; + }; + fan@2 { + reg = <0x02>; + aspeed,fan-tach-ch = /bits/ 8 <0x02 0x09>; + }; + fan@3 { + reg = <0x03>; + aspeed,fan-tach-ch = /bits/ 8 <0x03 0x0A>; + }; + fan@4 { + reg = <0x04>; + aspeed,fan-tach-ch = /bits/ 8 <0x04 0x0B>; + }; + fan@5 { + reg = <0x05>; + aspeed,fan-tach-ch = /bits/ 8 <0x05>; + }; +}; diff --git a/arch/arm/boot/dts/aspeed-bmc-vegman-rx20.dts b/arch/arm/boot/dts/aspeed-bmc-vegman-rx20.dts new file mode 100644 index 000000000000..ebbb68b55559 --- /dev/null +++ b/arch/arm/boot/dts/aspeed-bmc-vegman-rx20.dts @@ -0,0 +1,255 @@ +// SPDX-License-Identifier: GPL-2.0+ +// Copyright (C) 2021 YADRO +/dts-v1/; + +#include "aspeed-bmc-vegman.dtsi" + +/ { + model = "YADRO VEGMAN Rx20 BMC"; + compatible = "yadro,vegman-rx20-bmc", "aspeed,ast2500"; + + leds { + compatible = "gpio-leds"; + + temp_alarm { + label = "temp:red:status"; + default-state = "off"; + gpios = <&gpio ASPEED_GPIO(E, 4) GPIO_ACTIVE_LOW>; + }; + + temp_ok { + label = "temp:green:status"; + default-state = "off"; + gpios = <&gpio ASPEED_GPIO(E, 5) GPIO_ACTIVE_LOW>; + }; + + psu_fault { + label = "psu:red:status"; + default-state = "off"; + gpios = <&gpio ASPEED_GPIO(E, 6) GPIO_ACTIVE_LOW>; + }; + + psu_ok { + label = "psu:green:status"; + default-state = "off"; + gpios = <&gpio ASPEED_GPIO(E, 7) GPIO_ACTIVE_LOW>; + }; + }; +}; + +&gpio { + status = "okay"; + gpio-line-names = + /*A0-A7*/ "CASE_OPEN_DNP","CASE_OPEN_FAULT_RST_DNP","BEZEL_ON_PWR_P3V3","PWM_PWRGD_EXP_EN","SPEAKER_BMC","FM_FORCE_BMC_UPDATE","","", + /*B0-B7*/ "","","","","","","","", + /*C0-C7*/ "","","","","","","","", + /*D0-D7*/ "","","","","","","","", + /*E0-E7*/ "RESET_BUTTON","RESET_OUT","POWER_BUTTON","POWER_OUT","LED_TEMP_STATUS_R","LED_TEMP_STATUS_G","LED_PWR_STATUS_R","LED_PWR_STATUS_G", + /*F0-F7*/ "NMI_OUT","CPU1_DISABLE_COD","","","SKT0_FAULT_LED_DNP","SKT1_FAULT_LED_DNP","RST_RGMII_PHYRST_DNP","", + /*G0-G7*/ "CPU_ERR2","CPU_CATERR","PCH_BMC_THERMTRIP","SPI_BMC_BOOT_HD","IRQ_NMI_EVENT","SPI_BMC_BOOT_WP","SPI_BMC_BOOT_WP1","", + /*H0-H7*/ "PWRGD_P3V3_RISER1","PWRGD_P3V3_RISER2","PWRGD_P3V3_RISER3","","MIO_BIOS_SEL","_SPI_FLASH_HOLD","_SPI_FLASH_WP","FM_240VA_STATUS", + /*I0-I7*/ "","","","","","","","", + /*J0-J7*/ "","","","","","","","", + /*K0-K7*/ "","","","","","","","", + /*L0-L7*/ "","","","","","","","", + /*M0-M7*/ "SEL_FLASH_SOFT","STATUS_SEL_BMC","","","BMC_WDT_P","ID_BUTTON","PS_PWROK","", + /*N0-N7*/ "","","","","","","","", + /*O0-O7*/ "","","","","","","","", + /*P0-P7*/ "","","","","","","SPI_BIOS_ACTIVE_FLASH_SEL","STATUS_SEL_BIOS", + /*Q0-Q7*/ "","","","","","","","", + /*R0-R7*/ "_SPI_BMC_BOOT_CS1","","","","","","","", + /*S0-S7*/ "_SPI2_BMC_CS1","RSR_A_SMBEXP_RST_INT","RSR_B_SMBEXP_RST_INT","IRQ_SML0_ALERT_MUX","FP_LED_STATUS_GREEN","FP_LED_STATUS_AMBER","FP_ID_LED","", + /*T0-T7*/ "","","","","","","","", + /*U0-U7*/ "","","","","","","","", + /*V0-V7*/ "","","","","","","","", + /*W0-W7*/ "","","","","","","","", + /*X0-X7*/ "","","","","","","","", + /*Y0-Y7*/ "SIO_S3","SIO_S5","","SIO_ONCONTROL","","","","", + /*Z0-Z7*/ "FM_BMC_PWR_BTN","SIO_POWER_GOOD","FM_BMC_PWRBTN_OUT","FM_BMC_PCH_SCI_LPC","","","","", + /*AA0-AA7*/ "CPU_CLK_MUX_SEL","IRQ_SML1_PMBUS_ALERT","FM_PVCCIN_CPU0_PWR_IN_ALERT","FM_PVCCIN_CPU1_PWR_IN_ALERT","BMC_SYS_PWR_FAULT","BMC_SYS_PWR_OK","SMI","POST_COMPLETE", + /*AB0-AB7*/ "FM_CPU_BMCINIT","NMI_BUTTON","BMC_WDT_RST1","BMC_WDT_RST2","","","","", + /*AC0-AC7*/ "","","","","","","",""; +}; + +&sgpio { + ngpios = <80>; + bus-frequency = <2000000>; + status = "okay"; + /* SGPIO lines. even: input, odd: output */ + gpio-line-names = + /*A0-A7*/ "CPU1_PRESENCE","","CPU1_THERMTRIP","","CPU1_VRHOT","","CPU1_FIVR_FAULT","","CPU1_MEM_ABCD_VRHOT","","CPU1_MEM_EFGH_VRHOT","","","","","", + /*B0-B7*/ "CPU1_MISMATCH","","CPU1_MEM_THERM_EVENT","","CPU2_PRESENCE","","CPU2_THERMTRIP","","CPU2_VRHOT","","CPU2_FIVR_FAULT","","CPU2_MEM_ABCD_VRHOT","","CPU2_MEM_EFGH_VRHOT","", + /*C0-C7*/ "","","","","CPU2_MISMATCH","","CPU2_MEM_THERM_EVENT","","","","","","","","","", + /*D0-D7*/ "","","","","","","","","","","","","","","","", + /*E0-E7*/ "","","","","","","","","","","","","","","","", + /*F0-F7*/ "SGPIO_PLD_MINOR_REV_BIT0","","SGPIO_PLD_MINOR_REV_BIT1","","SGPIO_PLD_MINOR_REV_BIT2","","SGPIO_PLD_MINOR_REV_BIT3","","SGPIO_PLD_MAJOR_REV_BIT0","","SGPIO_PLD_MAJOR_REV_BIT1","","SGPIO_PLD_MAJOR_REV_BIT2","","SGPIO_PLD_MAJOR_REV_BIT3","", + /*G0-G7*/ "MAIN_PLD_MINOR_REV_BIT0","","MAIN_PLD_MINOR_REV_BIT1","","MAIN_PLD_MINOR_REV_BIT2","","MAIN_PLD_MINOR_REV_BIT3","","MAIN_PLD_MAJOR_REV_BIT0","","MAIN_PLD_MAJOR_REV_BIT1","","MAIN_PLD_MAJOR_REV_BIT2","","MAIN_PLD_MAJOR_REV_BIT3","", + /*H0-H7*/ "","","","","","","","","","","","","","","","", + /*I0-I7*/ "","","","","","","","","","","","","","","","", + /*J0-J7*/ "","","","","","","","","","","","","","","",""; +}; + +&i2c11 { + /* SMB_BMC_MGMT_LVC3 */ + gpio@21 { + compatible = "nxp,pcal9535"; + reg = <0x21>; + gpio-controller; + #gpio-cells = <2>; + gpio-line-names = + /*IO0.0-0.7*/ "ETH3_CLK_REQ", "ETH2_CLK_REQ", "RSR_A_PCIE_X16_2_PRSNT", "RSR_B_PCIE_X16_2_PRSNT", "", "RSR_B_PCIE_X8_3_PRSNT", "RSR_B_PCIE_X8_4_PRSNT", "RSR_B_PCIE_X16_PRSNT_N", + /*IO1.0-1.7*/ "RSR_B_PCIE_X8_2_PRSNT", "RSR_B_PCIE_X8_1_PRSNT", "NIC_1_PE_BUF_PRSNT", "RSR_A_PCIE_X16_PRSNT", "RSR_A_PCIE_X8_3_PRSNT", "RSR_A_PCIE_X8_2_PRSNT", "RSR_A_PCIE_X8_1_PRSNT_N", ""; + }; + gpio@23 { + compatible = "nxp,pcal9535"; + reg = <0x23>; + gpio-controller; + #gpio-cells = <2>; + gpio-line-names = + /*IO0.0-0.7*/ "FM_LINK_WIDTH_ID0", "FM_LINK_WIDTH_ID0", "FM_LINK_WIDTH_ID0", "FM_LINK_WIDTH_ID0", "FM_LINK_WIDTH_ID0", "", "", "", + /*IO1.0-1.7*/ "", "", "", "", "", "", "", ""; + }; + gpio@27 { + compatible = "nxp,pca9698"; + reg = <0x27>; + gpio-controller; + #gpio-cells = <2>; + gpio-line-names = + /*IO0.0-0.7*/ "PWRGD_PS_PWROK", "PWRGD_DSW_PWROK", "PWRGD_P5V_AUX", "PWRGD_P3V3_AUX", "PWRGD_P5V", "PWRGD_P3V3", "PWRGD_P1V8_PCH_AUX", "PWRGD_PCH_PVNN_AUX", + /*IO1.0-1.7*/ "PWRGD_P1V05_PCH_AUX", "PWRGD_PCH_AUX_VRS", "PWRGD_PVCCIN_CPU0", "PWRGD_PVCCSA_CPU0", "PWRGD_PVCCIO_CPU0", "PWRGD_PVMCP_CPU0", "PWRGD_P1V0_CPU0", "PWRGD_PVDDQ_ABC_CPU0", + /*IO2.0-2.7*/ "PWRGD_PVPP_ABC_CPU0", "PWRGD_PVTT_ABC_CPU0", "PWRGD_PVDDQ_DEF_CPU0", "PWRGD_PVPP_DEF_CPU0", "PWRGD_PVTT_DEF_CPU0", "PWRGD_PVCCIN_CPU1", "PWRGD_PVCCSA_CPU1", "PWRGD_PVCCIO_CPU1", + /*IO3.0-3.7*/ "PWRGD_PVMCP_CPU1", "PWRGD_P1V0_CPU1", "PWRGD_PVDDQ_GHJ_CPU1", "PWRGD_PVPP_GHJ_CPU1", "PWRGD_PVTT_GHJ_CPU1", "PWRGD_PVDDQ_KLM_CPU1", "PWRGD_PVPP_KLM_CPU1", "PWRGD_PVTT_KLM_CPU1", + /*IO4.0-4.7*/ "PCH_PWR_RESET_N", "FM_BOARD_SKU_ID0", "FM_BOARD_SKU_ID1", "FM_BOARD_SKU_ID2", "FM_BOARD_SKU_ID3", "FM_BOARD_SKU_ID4", "FM_BOARD_REV_ID0", "FM_BOARD_REV_ID1"; + }; + gpio@39 { + compatible = "nxp,pca9554"; + reg = <0x39>; + gpio-controller; + #gpio-cells = <2>; + gpio-line-names = + /*IO0.0-0.7*/ "FAN_FAULT_0", "FAN_FAULT_1", "FAN_FAULT_2", "FAN_FAULT_3", "FAN_FAULT_4", "FAN_FAULT_5", "FAN_FAULT_6", ""; + }; +}; + +&i2c13 { + /* SMB_PCIE2_STBY_LVC3 */ + mux-expa@70 { + compatible = "nxp,pca9548"; + reg = <0x70>; + #address-cells = <1>; + #size-cells = <0>; + i2c-mux-idle-disconnect; + + i2c@2 { + #address-cells = <1>; + #size-cells = <0>; + reg = <2>; + rsra-mux@72 { + compatible = "nxp,pca9548"; + reg = <0x72>; + #address-cells = <1>; + #size-cells = <0>; + + i2c@7 { + #address-cells = <1>; + #size-cells = <0>; + reg = <7>; + at24@50 { + compatible = "atmel,24c64"; + reg = <0x50>; + pagesize = <32>; + size = <8192>; + address-width = <16>; + }; + }; + }; + }; + }; + mux-sata@71 { + compatible = "nxp,pca9543"; + reg = <0x71>; + #address-cells = <1>; + #size-cells = <0>; + i2c-mux-idle-disconnect; + }; +}; + +&i2c2 { + /* SMB_PCIE_STBY_LVC3 */ + mux-expb@71 { + compatible = "nxp,pca9548"; + reg = <0x71>; + #address-cells = <1>; + #size-cells = <0>; + i2c-mux-idle-disconnect; + + i2c@0 { + #address-cells = <1>; + #size-cells = <0>; + reg = <0>; + rsrb-mux@72 { + compatible = "nxp,pca9548"; + reg = <0x72>; + #address-cells = <1>; + #size-cells = <0>; + i2c@7 { + #address-cells = <1>; + #size-cells = <0>; + reg = <7>; + at24@50 { + compatible = "atmel,24c64"; + reg = <0x50>; + pagesize = <32>; + size = <8192>; + address-width = <16>; + }; + }; + }; + at24@50 { + compatible = "atmel,24c64"; + reg = <0x50>; + pagesize = <32>; + size = <8192>; + address-width = <16>; + }; + }; + }; +}; + +&pwm_tacho { + status = "okay"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_pwm0_default &pinctrl_pwm1_default + &pinctrl_pwm2_default &pinctrl_pwm3_default + &pinctrl_pwm4_default &pinctrl_pwm5_default + &pinctrl_pwm6_default>; + + fan@0 { + reg = <0x00>; + aspeed,fan-tach-ch = /bits/ 8 <0x00 0x07>; + }; + fan@1 { + reg = <0x01>; + aspeed,fan-tach-ch = /bits/ 8 <0x01 0x08>; + }; + fan@2 { + reg = <0x02>; + aspeed,fan-tach-ch = /bits/ 8 <0x02 0x09>; + }; + fan@3 { + reg = <0x03>; + aspeed,fan-tach-ch = /bits/ 8 <0x03 0x0A>; + }; + fan@4 { + reg = <0x04>; + aspeed,fan-tach-ch = /bits/ 8 <0x04 0x0B>; + }; + fan@5 { + reg = <0x05>; + aspeed,fan-tach-ch = /bits/ 8 <0x05 0x0C>; + }; + fan@6 { + reg = <0x06>; + aspeed,fan-tach-ch = /bits/ 8 <0x06 0x0D>; + }; +}; diff --git a/arch/arm/boot/dts/aspeed-bmc-vegman-sx20.dts b/arch/arm/boot/dts/aspeed-bmc-vegman-sx20.dts new file mode 100644 index 000000000000..e36ee4704994 --- /dev/null +++ b/arch/arm/boot/dts/aspeed-bmc-vegman-sx20.dts @@ -0,0 +1,154 @@ +// SPDX-License-Identifier: GPL-2.0+ +// Copyright (C) 2021 YADRO +/dts-v1/; + +#include "aspeed-bmc-vegman.dtsi" + +/ { + model = "YADRO VEGMAN Sx20 BMC"; + compatible = "yadro,vegman-sx20-bmc", "aspeed,ast2500"; +}; + +&gpio { + status = "okay"; + gpio-line-names = + /*A0-A7*/ "CHASSIS_INTRUSION","CASE_OPEN_FAULT_RST","","","SPEAKER_BMC","FM_FORCE_BMC_UPDATE","","", + /*B0-B7*/ "","","","","","","","", + /*C0-C7*/ "","","","","","","","", + /*D0-D7*/ "","","","","","","","", + /*E0-E7*/ "RESET_BUTTON","RESET_OUT","POWER_BUTTON","POWER_OUT","","","","", + /*F0-F7*/ "NMI_OUT","CPU1_DISABLE_COD","","","SKT0_FAULT_LED","SKT1_FAULT_LED","RST_RGMII_PHYRST_DNP","", + /*G0-G7*/ "CPU_ERR2","CPU_CATERR","PCH_BMC_THERMTRIP","","IRQ_NMI_EVENT","","","", + /*H0-H7*/ "PWRGD_P3V3_RISER1","PWRGD_P3V3_RISER2","PWRGD_P3V3_RISER3","","MIO_BIOS_SEL","_SPI_FLASH_HOLD","_SPI_FLASH_WP","FM_240VA_STATUS", + /*I0-I7*/ "","","","","","","","", + /*J0-J7*/ "","","","","","","","", + /*K0-K7*/ "","","","","","","","", + /*L0-L7*/ "","","","","","","","", + /*M0-M7*/ "","","","","BMC_GPU_RISER_ID1","BMC_GPU_RISER_ID0","","", + /*N0-N7*/ "","","","","","","","", + /*O0-O7*/ "","","","","","","","_SPI2_BMC_CS_SEL", + /*P0-P7*/ "","P12V_HDDS_A_EN","P12V_HDDS_B_EN","P5V_HDDS_A_EN","PWRGD_P5V_HDDS_A","P5V_HDDS_B_EN","PWRGD_P5V_HDDS_B","", + /*Q0-Q7*/ "","","","","","","","", + /*R0-R7*/ "_SPI_RMM4_LITE_CS","","","","","","","", + /*S0-S7*/ "_SPI2_BMC_CS1","","","IRQ_SML0_ALERT_MUX","FP_LED_STATUS_GREEN","FP_LED_STATUS_AMBER","FP_ID_LED","", + /*T0-T7*/ "","","","","","","","", + /*U0-U7*/ "","","","","","","","", + /*V0-V7*/ "","","","","","","","", + /*W0-W7*/ "","","","","","","","", + /*X0-X7*/ "","","","","","","","", + /*Y0-Y7*/ "SIO_S3","SIO_S5","","SIO_ONCONTROL","","","","", + /*Z0-Z7*/ "FM_BMC_PWR_BTN","SIO_POWER_GOOD","FM_BMC_PWRBTN_OUT","FM_BMC_PCH_SCI_LPC","","","","", + /*AA0-AA7*/ "CPU_CLK_MUX_SEL","IRQ_SML1_PMBUS_ALERT","FM_PVCCIN_CPU0_PWR_IN_ALERT","FM_PVCCIN_CPU1_PWR_IN_ALERT","BMC_SYS_PWR_FAULT","BMC_SYS_PWR_OK","SMI","POST_COMPLETE", + /*AB0-AB7*/ "FM_CPU_BMCINIT","NMI_BUTTON","ID_BUTTON","PS_PWROK","","","","", + /*AC0-AC7*/ "","","","","","","",""; +}; + +&sgpio { + ngpios = <80>; + bus-frequency = <2000000>; + status = "okay"; + /* SGPIO lines. even: input, odd: output */ + gpio-line-names = + /*A0-A7*/ "CPU1_PRESENCE","","CPU1_THERMTRIP","","CPU1_VRHOT","","CPU1_FIVR_FAULT","","CPU1_MEM_ABCD_VRHOT","","CPU1_MEM_EFGH_VRHOT","","","","","", + /*B0-B7*/ "CPU1_MISMATCH","","CPU1_MEM_THERM_EVENT","","CPU2_PRESENCE","","CPU2_THERMTRIP","","CPU2_VRHOT","","CPU2_FIVR_FAULT","","CPU2_MEM_ABCD_VRHOT","","CPU2_MEM_EFGH_VRHOT","", + /*C0-C7*/ "","","","","CPU2_MISMATCH","","CPU2_MEM_THERM_EVENT","","","","","","","","","", + /*D0-D7*/ "","","","","","","","","","","","","","","","", + /*E0-E7*/ "","","","","","","","","","","","","","","","", + /*F0-F7*/ "SGPIO_PLD_MINOR_REV_BIT0","","SGPIO_PLD_MINOR_REV_BIT1","","SGPIO_PLD_MINOR_REV_BIT2","","SGPIO_PLD_MINOR_REV_BIT3","","SGPIO_PLD_MAJOR_REV_BIT0","","SGPIO_PLD_MAJOR_REV_BIT1","","SGPIO_PLD_MAJOR_REV_BIT2","","SGPIO_PLD_MAJOR_REV_BIT3","", + /*G0-G7*/ "MAIN_PLD_MINOR_REV_BIT0","","MAIN_PLD_MINOR_REV_BIT1","","MAIN_PLD_MINOR_REV_BIT2","","MAIN_PLD_MINOR_REV_BIT3","","MAIN_PLD_MAJOR_REV_BIT0","","MAIN_PLD_MAJOR_REV_BIT1","","MAIN_PLD_MAJOR_REV_BIT2","","MAIN_PLD_MAJOR_REV_BIT3","", + /*H0-H7*/ "","","","","","","","","","","","","","","","", + /*I0-I7*/ "","","","","","","","","","","","","","","","", + /*J0-J7*/ "","","","","","","","","","","","","","","",""; +}; + +&i2c11 { + /* SMB_BMC_MGMT_LVC3 */ + gpio@21 { + compatible = "nxp,pcal9535"; + reg = <0x21>; + gpio-controller; + #gpio-cells = <2>; + gpio-line-names = + /*IO0.0-0.7*/ "", "", "CPU1_PE3_0_SLOT_PRSNT", "", "CPU1_PE1_GPU_PRSNT", "CPU1_PE3_1_SLOT_PRSNT", "PE_PCH_MEZ_PRSNT", "CPU0_PE3_1_SLOT_PRSNT", + /*IO1.0-1.7*/ "CPU0_PE1_GPU_PRSNT", "CPU0_PE2_NVME2_PRSNT", "CPU1_PE2_NVME3_PRSNT", "CPU1_PE2_SLOT_PRSNT", "CPU1_PE2_NVME4_PRSNT", "", "CPU0_PE2_NVME1_PRSNT", "CPU0_PE3_0_RAID_PRSNT"; + }; + gpio@27 { + compatible = "nxp,pca9698"; + reg = <0x27>; + gpio-controller; + #gpio-cells = <2>; + gpio-line-names = + /*IO0.0-0.7*/ "PWRGD_PS_PWROK", "PWRGD_DSW_PWROK", "PWRGD_P5V_AUX", "PWRGD_P3V3_AUX", "PWRGD_P5V", "PWRGD_P3V3", "PWRGD_P1V8_PCH_AUX", "PWRGD_PCH_PVNN_AUX", + /*IO1.0-1.7*/ "PWRGD_P1V05_PCH_AUX", "PWRGD_PCH_AUX_VRS", "PWRGD_PVCCIN_CPU0", "PWRGD_PVCCSA_CPU0", "PWRGD_PVCCIO_CPU0", "PWRGD_PVMCP_CPU0", "PWRGD_P1V0_CPU0", "PWRGD_PVDDQ_ABC_CPU0", + /*IO2.0-2.7*/ "PWRGD_PVPP_ABC_CPU0", "PWRGD_PVTT_ABC_CPU0", "PWRGD_PVDDQ_DEF_CPU0", "PWRGD_PVPP_DEF_CPU0", "PWRGD_PVTT_DEF_CPU0", "PWRGD_PVCCIN_CPU1", "PWRGD_PVCCSA_CPU1", "PWRGD_PVCCIO_CPU1", + /*IO3.0-3.7*/ "PWRGD_PVMCP_CPU1", "PWRGD_P1V0_CPU1", "PWRGD_PVDDQ_GHJ_CPU1", "PWRGD_PVPP_GHJ_CPU1", "PWRGD_PVTT_GHJ_CPU1", "PWRGD_PVDDQ_KLM_CPU1", "PWRGD_PVPP_KLM_CPU1", "PWRGD_PVTT_KLM_CPU1", + /*IO4.0-4.7*/ "PWRGD_P5V_HDDS_A_R", "PWRGD_P5V_HDDS_B_R", "", "", "", "", "", ""; + }; +}; + +&i2c13 { + /* SMB_PCIE2_STBY_LVC3 */ + mux-expa@73 { + compatible = "nxp,pca9545"; + reg = <0x73>; + #address-cells = <1>; + #size-cells = <0>; + i2c-mux-idle-disconnect; + }; + mux-sata@71 { + compatible = "nxp,pca9543"; + reg = <0x71>; + #address-cells = <1>; + #size-cells = <0>; + i2c-mux-idle-disconnect; + }; +}; + +&i2c2 { + /* SMB_PCIE_STBY_LVC3 */ + mux-expb@71 { + compatible = "nxp,pca9545"; + reg = <0x71>; + #address-cells = <1>; + #size-cells = <0>; + i2c-mux-idle-disconnect; + }; +}; + +&pwm_tacho { + status = "okay"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_pwm0_default &pinctrl_pwm1_default + &pinctrl_pwm2_default &pinctrl_pwm3_default + &pinctrl_pwm4_default &pinctrl_pwm5_default + &pinctrl_pwm6_default>; + + fan@0 { + reg = <0x00>; + aspeed,fan-tach-ch = /bits/ 8 <0x00>; + }; + fan@1 { + reg = <0x01>; + aspeed,fan-tach-ch = /bits/ 8 <0x01>; + }; + fan@2 { + reg = <0x02>; + aspeed,fan-tach-ch = /bits/ 8 <0x02>; + }; + fan@3 { + reg = <0x03>; + aspeed,fan-tach-ch = /bits/ 8 <0x03>; + }; + fan@4 { + reg = <0x04>; + aspeed,fan-tach-ch = /bits/ 8 <0x04>; + }; + fan@5 { + reg = <0x05>; + aspeed,fan-tach-ch = /bits/ 8 <0x05>; + }; + fan@6 { + reg = <0x06>; + aspeed,fan-tach-ch = /bits/ 8 <0x06>; + }; +}; diff --git a/arch/arm/boot/dts/aspeed-bmc-vegman.dtsi b/arch/arm/boot/dts/aspeed-bmc-vegman.dtsi new file mode 100644 index 000000000000..1a5b25b2ea29 --- /dev/null +++ b/arch/arm/boot/dts/aspeed-bmc-vegman.dtsi @@ -0,0 +1,311 @@ +// SPDX-License-Identifier: GPL-2.0+ +// Copyright (C) 2021 YADRO + +#include "aspeed-g5.dtsi" +#include + +/ { + aliases { + serial4 = &uart5; + }; + + chosen { + stdout-path = &uart5; + bootargs = "console=ttyS4,115200 earlyprintk"; + }; + + memory@80000000 { + reg = <0x80000000 0x20000000>; + }; + + reserved-memory { + #address-cells = <1>; + #size-cells = <1>; + ranges; + + video_engine_memory: jpegbuffer { + size = <0x02000000>; /* 32M */ + alignment = <0x01000000>; + compatible = "shared-dma-pool"; + reusable; + }; + + ramoops@9eff0000{ + compatible = "ramoops"; + reg = <0x9eff0000 0x10000>; + record-size = <0x2000>; + console-size = <0x2000>; + }; + }; + + iio-hwmon { + compatible = "iio-hwmon"; + io-channels = <&adc 0>, <&adc 1>, <&adc 2>, <&adc 3>, + <&adc 4>, <&adc 5>, <&adc 6>, <&adc 7>, + <&adc 8>, <&adc 9>, <&adc 10>, <&adc 11>, + <&adc 12>, <&adc 13>, <&adc 14>, <&adc 15>; + }; + + leds { + compatible = "gpio-leds"; + + identify { + label = "platform:blue:indicator"; + linux,default-trigger = "heartbeat"; + gpios = <&gpio ASPEED_GPIO(S, 6) GPIO_ACTIVE_LOW>; + }; + + status_amber { + label = "platform:red:status"; + default-state = "off"; + gpios = <&gpio ASPEED_GPIO(S, 5) GPIO_ACTIVE_LOW>; + }; + + status_green { + label = "platform:green:status"; + default-state = "off"; + gpios = <&gpio ASPEED_GPIO(S, 4) GPIO_ACTIVE_LOW>; + }; + + power_fault { + label = "platform:red:power"; + default-state = "off"; + gpios = <&gpio ASPEED_GPIO(AA, 4) GPIO_ACTIVE_LOW>; + }; + + power_ok { + label = "platform:green:power"; + default-state = "off"; + gpios = <&gpio ASPEED_GPIO(AA, 5) GPIO_ACTIVE_LOW>; + }; + }; + + beeper { + compatible = "pwm-beeper"; + pwms = <&timer 5 1000000 0>; + }; +}; + +&fmc { + status = "okay"; + flash@0 { + status = "okay"; + label = "bmc"; + m25p,fast-read; +#include "openbmc-flash-layout-64.dtsi" + }; +}; + +&spi2 { + status = "okay"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_spi2ck_default + &pinctrl_spi2miso_default + &pinctrl_spi2mosi_default + &pinctrl_spi2cs0_default>; + flash@0 { + status = "okay"; + label = "bios"; + m25p,fast-read; + }; +}; + +&mac0 { + status = "okay"; + use-ncsi; + + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_rmii1_default>; +}; + +&mac1 { + status = "okay"; + + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_rgmii2_default &pinctrl_mdio2_default>; + + phy-mode = "rgmii"; + phy-handle = <&phy>; + mdio { + #address-cells = <1>; + #size-cells = <0>; + + phy: ethernet-phy@1 { + /* KSZ9131 */ + compatible = "ethernet-phy-id0022.1640"; + reg = <1>; + + micrel,led-mode = <0>; + }; + }; +}; + +&vhub { + status = "okay"; +}; + +&adc { + status = "okay"; +}; + +&video { + status = "okay"; + memory-region = <&video_engine_memory>; +}; + +&sdmmc { + status = "okay"; +}; + +&sdhci1 { + status = "okay"; + + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_sd2_default>; + disable-wp; +}; + +&timer { + fttmr010,pwm-outputs = <5>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_timer5_default>; + #pwm-cells = <3>; + status = "okay"; +}; + +&uart1 { + status = "okay"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_txd1_default + &pinctrl_rxd1_default + &pinctrl_nrts1_default + &pinctrl_ndtr1_default + &pinctrl_ndsr1_default + &pinctrl_ncts1_default + &pinctrl_ndcd1_default + &pinctrl_nri1_default>; +}; + +&uart5 { + status = "okay"; +}; + +&vuart { + status = "okay"; +}; + +&kcs3 { + aspeed,lpc-io-reg = <0xCA2>; + status = "okay"; +}; + +&kcs4 { + aspeed,lpc-io-reg = <0xCA4>; + status = "okay"; +}; + +&lpc_snoop { + snoop-ports = <0x80>; + status = "okay"; +}; + +&uart_routing { + status = "okay"; +}; + +&uart2 { + status = "okay"; + pinctrl-names = "default"; + pinctrl-0 = <>; +}; + +&uart3 { + status = "okay"; + pinctrl-names = "default"; + pinctrl-0 = <>; +}; + +&uart4 { + status = "okay"; + pinctrl-names = "default"; + pinctrl-0 = <>; +}; + +&i2c0 { + /* SMB_IPMB_STBY_LVC3 */ + multi-master; + status = "okay"; +}; + +&i2c1 { + /* SMB_CHASSENSOR_STBY_LVC3 */ + status = "okay"; +}; + +&i2c2 { + /* SMB_PCIE_STBY_LVC3 */ + status = "okay"; +}; + +&i2c3 { + /* SMB_HOST_STBY_LVC3 */ + multi-master; + status = "okay"; +}; + +&i2c4 { + /* BMC_PMBUS2_STBY */ + status = "okay"; +}; + +&i2c5 { + /* SMB_SMLINK0_STBY_LVC3 */ + bus-frequency = <1000000>; + multi-master; + status = "okay"; +}; + +&i2c6 { + /* SMB_TEMPSENSOR_STBY_LVC3 */ + multi-master; + status = "okay"; +}; + +&i2c7 { + /* SMB_SM_PMB1_SML1_STBY_LVC3 */ + multi-master; + status = "okay"; +}; + +&i2c9 { + /* SMB_BMC_ETH3_LVC3 */ + status = "okay"; +}; + +&i2c10 { + /* SMB_BMC_ETH2_LVC3 */ + status = "okay"; +}; + +&i2c11 { + /* SMB_BMC_MGMT_LVC3 */ + status = "okay"; + + at24@50 { + compatible = "atmel,24c64"; + reg = <0x50>; + pagesize = <32>; + size = <8192>; + address-width = <16>; + }; +}; + +&i2c12 { + /* SMB_BMC_FAULT_EXP_LVC3 */ + status = "okay"; +}; + +&i2c13 { + /* SMB_PCIE2_STBY_LVC3 */ + status = "okay"; +}; From bc9fd597b3009d3412022c7beb3fbb01c9d27b31 Mon Sep 17 00:00:00 2001 From: Joel Stanley Date: Wed, 17 Nov 2021 11:51:04 +0800 Subject: [PATCH 06/17] dt-bindings: aspeed: Add Secure Boot Controller bindings The secure boot controller was first introduced in the AST2600. Signed-off-by: Joel Stanley Reviewed-by: Rob Herring Link: https://lore.kernel.org/r/20211117035106.321454-2-joel@jms.id.au Signed-off-by: Joel Stanley --- .../bindings/arm/aspeed/aspeed,sbc.yaml | 37 +++++++++++++++++++ 1 file changed, 37 insertions(+) create mode 100644 Documentation/devicetree/bindings/arm/aspeed/aspeed,sbc.yaml diff --git a/Documentation/devicetree/bindings/arm/aspeed/aspeed,sbc.yaml b/Documentation/devicetree/bindings/arm/aspeed/aspeed,sbc.yaml new file mode 100644 index 000000000000..c72aab706484 --- /dev/null +++ b/Documentation/devicetree/bindings/arm/aspeed/aspeed,sbc.yaml @@ -0,0 +1,37 @@ +# SPDX-License-Identifier: (GPL-2.0-or-later OR BSD-2-Clause) +# Copyright 2021 Joel Stanley, IBM Corp. +%YAML 1.2 +--- +$id: "http://devicetree.org/schemas/arm/aspeed/aspeed,sbc.yaml#" +$schema: "http://devicetree.org/meta-schemas/core.yaml#" + +title: ASPEED Secure Boot Controller + +maintainers: + - Joel Stanley + - Andrew Jeffery + +description: | + The ASPEED SoCs have a register bank for interacting with the secure boot + controller. + +properties: + compatible: + items: + - const: aspeed,ast2600-sbc + + reg: + maxItems: 1 + +required: + - compatible + - reg + +additionalProperties: false + +examples: + - | + sbc: secure-boot-controller@1e6f2000 { + compatible = "aspeed,ast2600-sbc"; + reg = <0x1e6f2000 0x1000>; + }; From fea289467608ffddb2f8d3a740912047974bb183 Mon Sep 17 00:00:00 2001 From: Joel Stanley Date: Wed, 17 Nov 2021 11:51:05 +0800 Subject: [PATCH 07/17] ARM: dts: aspeed: Add secure boot controller node The ast2600 has a secure boot controller. Signed-off-by: Joel Stanley Reviewed-by: Ryan Chen Link: https://lore.kernel.org/r/20211117035106.321454-3-joel@jms.id.au Signed-off-by: Joel Stanley --- arch/arm/boot/dts/aspeed-g6.dtsi | 5 +++++ 1 file changed, 5 insertions(+) diff --git a/arch/arm/boot/dts/aspeed-g6.dtsi b/arch/arm/boot/dts/aspeed-g6.dtsi index 5106a424f1ce..16b36c13695a 100644 --- a/arch/arm/boot/dts/aspeed-g6.dtsi +++ b/arch/arm/boot/dts/aspeed-g6.dtsi @@ -384,6 +384,11 @@ status = "disabled"; }; + sbc: secure-boot-controller@1e6f2000 { + compatible = "aspeed,ast2600-sbc"; + reg = <0x1e6f2000 0x1000>; + }; + gpio0: gpio@1e780000 { #gpio-cells = <2>; gpio-controller; From 0720caa3f81d6b8c1ee5d51d3d251dc43030e687 Mon Sep 17 00:00:00 2001 From: Lei YU Date: Fri, 10 Dec 2021 17:34:43 +0800 Subject: [PATCH 08/17] ARM: dts: Add openbmc-flash-layout-64-alt.dtsi Add openbmc-flash-layout-64-alt.dtsi to describe the partitions of the secondary flash for OpenBMC's 64M static layout. The layout is the same as openbmc-flash-layout-64.dtsi and the labels are prepended with "alt-" for the partitions. Signed-off-by: Lei YU Reviewed-by: Patrick Williams Link: https://lore.kernel.org/r/20211210093443.2140557-1-yulei.sh@bytedance.com Signed-off-by: Joel Stanley --- .../boot/dts/openbmc-flash-layout-64-alt.dtsi | 35 +++++++++++++++++++ 1 file changed, 35 insertions(+) create mode 100644 arch/arm/boot/dts/openbmc-flash-layout-64-alt.dtsi diff --git a/arch/arm/boot/dts/openbmc-flash-layout-64-alt.dtsi b/arch/arm/boot/dts/openbmc-flash-layout-64-alt.dtsi new file mode 100644 index 000000000000..650525867561 --- /dev/null +++ b/arch/arm/boot/dts/openbmc-flash-layout-64-alt.dtsi @@ -0,0 +1,35 @@ +// SPDX-License-Identifier: GPL-2.0+ +/* + * Copyright (C) 2020 Bytedance. + */ + +partitions { + compatible = "fixed-partitions"; + #address-cells = <1>; + #size-cells = <1>; + + u-boot@0 { + reg = <0x0 0xe0000>; // 896KB + label = "alt-u-boot"; + }; + + u-boot-env@e0000 { + reg = <0xe0000 0x20000>; // 128KB + label = "alt-u-boot-env"; + }; + + kernel@100000 { + reg = <0x100000 0x900000>; // 9MB + label = "alt-kernel"; + }; + + rofs@a00000 { + reg = <0xa00000 0x2000000>; // 32MB + label = "alt-rofs"; + }; + + rwfs@6000000 { + reg = <0x2a00000 0x1600000>; // 22MB + label = "alt-rwfs"; + }; +}; From b26965e99788ea163fc217bdca1c2b17a5d70c90 Mon Sep 17 00:00:00 2001 From: Lei YU Date: Fri, 10 Dec 2021 17:36:23 +0800 Subject: [PATCH 09/17] ARM: dts: aspeed: g220a: Enable secondary flash Enable the secondary flash of the g220a's BMC and the wdt2. Signed-off-by: Lei YU Link: https://lore.kernel.org/r/20211210093623.2140640-1-yulei.sh@bytedance.com Signed-off-by: Joel Stanley --- arch/arm/boot/dts/aspeed-bmc-bytedance-g220a.dts | 12 ++++++++++++ 1 file changed, 12 insertions(+) diff --git a/arch/arm/boot/dts/aspeed-bmc-bytedance-g220a.dts b/arch/arm/boot/dts/aspeed-bmc-bytedance-g220a.dts index 01dace8f5e5f..0d1fb5ccfd36 100644 --- a/arch/arm/boot/dts/aspeed-bmc-bytedance-g220a.dts +++ b/arch/arm/boot/dts/aspeed-bmc-bytedance-g220a.dts @@ -260,6 +260,13 @@ spi-max-frequency = <50000000>; #include "openbmc-flash-layout-64.dtsi" }; + flash@1 { + status = "okay"; + label = "alt-bmc"; + m25p,fast-read; + spi-max-frequency = <50000000>; +#include "openbmc-flash-layout-64-alt.dtsi" + }; }; &spi1 { @@ -278,6 +285,11 @@ status = "okay"; }; +&wdt2 { + status = "okay"; + aspeed,alt-boot; +}; + &gpio { status = "okay"; gpio-line-names = From a8c729e966c4e9d033242d948b0e53c2a62d32e2 Mon Sep 17 00:00:00 2001 From: Howard Chiu Date: Tue, 7 Dec 2021 17:49:24 +0800 Subject: [PATCH 10/17] ARM: dts: aspeed: Adding Facebook Bletchley BMC Initial introduction of Facebook Bletchley equipped with Aspeed 2600 BMC SoC. Signed-off-by: Howard Chiu Link: https://lore.kernel.org/r/20211207094923.422422-1-howard.chiu@quantatw.com Signed-off-by: Joel Stanley --- arch/arm/boot/dts/Makefile | 1 + .../dts/aspeed-bmc-facebook-bletchley.dts | 756 ++++++++++++++++++ 2 files changed, 757 insertions(+) create mode 100644 arch/arm/boot/dts/aspeed-bmc-facebook-bletchley.dts diff --git a/arch/arm/boot/dts/Makefile b/arch/arm/boot/dts/Makefile index 78b71e02624c..6ff97305200d 100644 --- a/arch/arm/boot/dts/Makefile +++ b/arch/arm/boot/dts/Makefile @@ -1482,6 +1482,7 @@ dtb-$(CONFIG_ARCH_ASPEED) += \ aspeed-bmc-arm-stardragon4800-rep2.dtb \ aspeed-bmc-asrock-e3c246d4i.dtb \ aspeed-bmc-bytedance-g220a.dtb \ + aspeed-bmc-facebook-bletchley.dtb \ aspeed-bmc-facebook-cloudripper.dtb \ aspeed-bmc-facebook-cmm.dtb \ aspeed-bmc-facebook-elbert.dtb \ diff --git a/arch/arm/boot/dts/aspeed-bmc-facebook-bletchley.dts b/arch/arm/boot/dts/aspeed-bmc-facebook-bletchley.dts new file mode 100644 index 000000000000..f973ea883b97 --- /dev/null +++ b/arch/arm/boot/dts/aspeed-bmc-facebook-bletchley.dts @@ -0,0 +1,756 @@ +// SPDX-License-Identifier: GPL-2.0+ +// Copyright (c) 2021 Facebook Inc. +/dts-v1/; + +#include "aspeed-g6.dtsi" +#include +#include + +/ { + model = "Facebook Bletchley BMC"; + compatible = "facebook,bletchley-bmc", "aspeed,ast2600"; + + aliases { + serial4 = &uart5; + }; + + chosen { + bootargs = "console=ttyS4,57600n8"; + }; + + memory@80000000 { + device_type = "memory"; + reg = <0x80000000 0x80000000>; + }; + + iio-hwmon { + compatible = "iio-hwmon"; + io-channels = <&adc0 0>, <&adc0 1>, <&adc0 2>, <&adc0 3>, + <&adc0 4>, <&adc0 5>, <&adc0 6>, <&adc0 7>, + <&adc1 0>, <&adc1 1>, <&adc1 2>, <&adc1 3>, + <&adc1 4>, <&adc1 5>, <&adc1 6>, <&adc1 7>; + }; + + spi_gpio: spi-gpio { + compatible = "spi-gpio"; + #address-cells = <1>; + #size-cells = <0>; + + gpio-sck = <&gpio0 ASPEED_GPIO(Z, 3) GPIO_ACTIVE_HIGH>; + gpio-mosi = <&gpio0 ASPEED_GPIO(Z, 4) GPIO_ACTIVE_HIGH>; + gpio-miso = <&gpio0 ASPEED_GPIO(Z, 5) GPIO_ACTIVE_HIGH>; + num-chipselects = <1>; + cs-gpios = <&gpio0 ASPEED_GPIO(Z, 0) GPIO_ACTIVE_LOW>; + + tpmdev@0 { + compatible = "tcg,tpm_tis-spi"; + spi-max-frequency = <33000000>; + reg = <0>; + }; + }; + + switchphy: ethernet-phy@0 { + // Fixed link + }; + + leds { + compatible = "gpio-leds"; + + sys_log_id { + retain-state-shutdown; + default-state = "keep"; + gpios = <&front_leds 0 GPIO_ACTIVE_HIGH>; + }; + fan0_blue { + retain-state-shutdown; + default-state = "on"; + gpios = <&fan_ioexp 8 GPIO_ACTIVE_HIGH>; + }; + fan1_blue { + retain-state-shutdown; + default-state = "on"; + gpios = <&fan_ioexp 9 GPIO_ACTIVE_HIGH>; + }; + fan2_blue { + retain-state-shutdown; + default-state = "on"; + gpios = <&fan_ioexp 10 GPIO_ACTIVE_HIGH>; + }; + fan3_blue { + retain-state-shutdown; + default-state = "on"; + gpios = <&fan_ioexp 11 GPIO_ACTIVE_HIGH>; + }; + fan0_amber { + retain-state-shutdown; + default-state = "off"; + gpios = <&fan_ioexp 12 GPIO_ACTIVE_HIGH>; + }; + fan1_amber { + retain-state-shutdown; + default-state = "off"; + gpios = <&fan_ioexp 13 GPIO_ACTIVE_HIGH>; + }; + fan2_amber { + retain-state-shutdown; + default-state = "off"; + gpios = <&fan_ioexp 14 GPIO_ACTIVE_HIGH>; + }; + fan3_amber { + retain-state-shutdown; + default-state = "off"; + gpios = <&fan_ioexp 15 GPIO_ACTIVE_HIGH>; + }; + sled0_amber { + retain-state-shutdown; + default-state = "off"; + gpios = <&sled0_leds 0 GPIO_ACTIVE_LOW>; + }; + sled0_blue { + retain-state-shutdown; + default-state = "off"; + gpios = <&sled0_leds 1 GPIO_ACTIVE_LOW>; + }; + sled1_amber { + retain-state-shutdown; + default-state = "off"; + gpios = <&sled1_leds 0 GPIO_ACTIVE_LOW>; + }; + sled1_blue { + retain-state-shutdown; + default-state = "off"; + gpios = <&sled1_leds 1 GPIO_ACTIVE_LOW>; + }; + sled2_amber { + retain-state-shutdown; + default-state = "off"; + gpios = <&sled2_leds 0 GPIO_ACTIVE_LOW>; + }; + sled2_blue { + retain-state-shutdown; + default-state = "off"; + gpios = <&sled2_leds 1 GPIO_ACTIVE_LOW>; + }; + sled3_amber { + retain-state-shutdown; + default-state = "off"; + gpios = <&sled3_leds 0 GPIO_ACTIVE_LOW>; + }; + sled3_blue { + retain-state-shutdown; + default-state = "off"; + gpios = <&sled3_leds 1 GPIO_ACTIVE_LOW>; + }; + sled4_amber { + retain-state-shutdown; + default-state = "off"; + gpios = <&sled4_leds 0 GPIO_ACTIVE_LOW>; + }; + sled4_blue { + retain-state-shutdown; + default-state = "off"; + gpios = <&sled4_leds 1 GPIO_ACTIVE_LOW>; + }; + sled5_amber { + retain-state-shutdown; + default-state = "off"; + gpios = <&sled5_leds 0 GPIO_ACTIVE_LOW>; + }; + sled5_blue { + retain-state-shutdown; + default-state = "off"; + gpios = <&sled5_leds 1 GPIO_ACTIVE_LOW>; + }; + }; +}; + +&mac2 { + status = "okay"; + phy-mode = "rgmii"; + phy-handle = <&switchphy>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_rgmii3_default>; + + fixed-link { + speed = <1000>; + full-duplex; + }; +}; + +&rtc { + status = "okay"; +}; + +&fmc { + status = "okay"; + flash@0 { + status = "okay"; + m25p,fast-read; + label = "bmc"; + spi-max-frequency = <50000000>; +#include "openbmc-flash-layout-128.dtsi" + }; +}; + +&spi2 { + status = "okay"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_spi2_default>; + + flash@0 { + status = "okay"; + m25p,fast-read; + label = "pnor"; + spi-max-frequency = <100000000>; + }; +}; + +&i2c0 { + status = "okay"; + /* TODO: Add ADC INA230 */ + + mp5023@40 { + compatible = "mps,mp5023"; + reg = <0x40>; + }; + + tmp421@4f { + compatible = "ti,tmp421"; + reg = <0x4f>; + }; + + sled0_ioexp: pca9539@76 { + compatible = "nxp,pca9539"; + reg = <0x76>; + #address-cells = <1>; + #size-cells = <0>; + gpio-controller; + #gpio-cells = <2>; + + gpio-line-names = + "SLED0_MS_DETECT1","SLED0_VBUS_BMC_EN","SLED0_INA230_ALERT","SLED0_P12V_STBY_ALERT", + "SLED0_SSD_ALERT","SLED0_MS_DETECT0","SLED0_RST_CCG5","SLED0_FUSB302_INT", + "SLED0_MD_STBY_RESET","SLED0_MD_IOEXP_EN_FAULT","SLED0_MD_DIR","SLED0_MD_DECAY", + "SLED0_MD_MODE1","SLED0_MD_MODE2","SLED0_MD_MODE3","power-host0"; + }; + + sled0_leds: pca9552@67 { + compatible = "nxp,pca9552"; + reg = <0x67>; + #address-cells = <1>; + #size-cells = <0>; + gpio-controller; + #gpio-cells = <2>; + + gpio-line-names = + "led-sled0-amber","led-sled0-blue","SLED0_RST_IOEXP","", + "","","","", + "","","","", + "","","",""; + }; + + sled0_fusb302: typec-portc@22 { + compatible = "fcs,fusb302"; + reg = <0x22>; + + connector { + compatible = "usb-c-connector"; + label = "USB-C"; + power-role = "dual"; + try-power-role = "sink"; + data-role = "dual"; + source-pdos = ; + sink-pdos = ; + op-sink-microwatt = <10000000>; + }; + }; +}; + +&i2c1 { + status = "okay"; + /* TODO: Add ADC INA230 */ + + mp5023@40 { + compatible = "mps,mp5023"; + reg = <0x40>; + }; + + tmp421@4f { + compatible = "ti,tmp421"; + reg = <0x4f>; + }; + + sled1_ioexp: pca9539@76 { + compatible = "nxp,pca9539"; + reg = <0x76>; + #address-cells = <1>; + #size-cells = <0>; + gpio-controller; + #gpio-cells = <2>; + + gpio-line-names = + "SLED1_MS_DETECT1","SLED1_VBUS_BMC_EN","SLED1_INA230_ALERT","SLED1_P12V_STBY_ALERT", + "SLED1_SSD_ALERT","SLED1_MS_DETECT0","SLED1_RST_CCG5","SLED1_FUSB302_INT", + "SLED1_MD_STBY_RESET","SLED1_MD_IOEXP_EN_FAULT","SLED1_MD_DIR","SLED1_MD_DECAY", + "SLED1_MD_MODE1","SLED1_MD_MODE2","SLED1_MD_MODE3","power-host1"; + }; + + sled1_leds: pca9552@67 { + compatible = "nxp,pca9552"; + reg = <0x67>; + #address-cells = <1>; + #size-cells = <0>; + gpio-controller; + #gpio-cells = <2>; + + gpio-line-names = + "led-sled1-amber","led-sled1-blue","SLED1_RST_IOEXP","", + "","","","", + "","","","", + "","","",""; + }; + + sled1_fusb302: typec-portc@22 { + compatible = "fcs,fusb302"; + reg = <0x22>; + + connector { + compatible = "usb-c-connector"; + label = "USB-C"; + power-role = "dual"; + try-power-role = "sink"; + data-role = "dual"; + source-pdos = ; + sink-pdos = ; + op-sink-microwatt = <10000000>; + }; + }; +}; + +&i2c1 { + status = "okay"; +}; + +&i2c2 { + status = "okay"; + /* TODO: Add ADC INA230 */ + + mp5023@40 { + compatible = "mps,mp5023"; + reg = <0x40>; + }; + + tmp421@4f { + compatible = "ti,tmp421"; + reg = <0x4f>; + }; + + sled2_ioexp: pca9539@76 { + compatible = "nxp,pca9539"; + reg = <0x76>; + #address-cells = <1>; + #size-cells = <0>; + gpio-controller; + #gpio-cells = <2>; + + gpio-line-names = + "SLED2_MS_DETECT1","SLED2_VBUS_BMC_EN","SLED2_INA230_ALERT","SLED2_P12V_STBY_ALERT", + "SLED2_SSD_ALERT","SLED2_MS_DETECT0","SLED2_RST_CCG5","SLED2_FUSB302_INT", + "SLED2_MD_STBY_RESET","SLED2_MD_IOEXP_EN_FAULT","SLED2_MD_DIR","SLED2_MD_DECAY", + "SLED2_MD_MODE1","SLED2_MD_MODE2","SLED2_MD_MODE3","power-host2"; + }; + + sled2_leds: pca9552@67 { + compatible = "nxp,pca9552"; + reg = <0x67>; + #address-cells = <1>; + #size-cells = <0>; + gpio-controller; + #gpio-cells = <2>; + + gpio-line-names = + "led-sled2-amber","led-sled2-blue","SLED2_RST_IOEXP","", + "","","","", + "","","","", + "","","",""; + }; + + sled2_fusb302: typec-portc@22 { + compatible = "fcs,fusb302"; + reg = <0x22>; + + connector { + compatible = "usb-c-connector"; + label = "USB-C"; + power-role = "dual"; + try-power-role = "sink"; + data-role = "dual"; + source-pdos = ; + sink-pdos = ; + op-sink-microwatt = <10000000>; + }; + }; +}; + +&i2c3 { + status = "okay"; + /* TODO: Add ADC INA230 */ + + mp5023@40 { + compatible = "mps,mp5023"; + reg = <0x40>; + }; + + tmp421@4f { + compatible = "ti,tmp421"; + reg = <0x4f>; + }; + + sled3_ioexp: pca9539@76 { + compatible = "nxp,pca9539"; + reg = <0x76>; + #address-cells = <1>; + #size-cells = <0>; + gpio-controller; + #gpio-cells = <2>; + + gpio-line-names = + "SLED3_MS_DETECT1","SLED3_VBUS_BMC_EN","SLED3_INA230_ALERT","SLED3_P12V_STBY_ALERT", + "SLED3_SSD_ALERT","SLED3_MS_DETECT0","SLED3_RST_CCG5","SLED3_FUSB302_INT", + "SLED3_MD_STBY_RESET","SLED3_MD_IOEXP_EN_FAULT","SLED3_MD_DIR","SLED3_MD_DECAY", + "SLED3_MD_MODE1","SLED3_MD_MODE2","SLED3_MD_MODE3","power-host3"; + }; + + sled3_leds: pca9552@67 { + compatible = "nxp,pca9552"; + reg = <0x67>; + #address-cells = <1>; + #size-cells = <0>; + gpio-controller; + #gpio-cells = <2>; + + gpio-line-names = + "led-sled3-amber","led-sled3-blue","SLED3_RST_IOEXP","", + "","","","", + "","","","", + "","","",""; + }; + + sled3_fusb302: typec-portc@22 { + compatible = "fcs,fusb302"; + reg = <0x22>; + + connector { + compatible = "usb-c-connector"; + label = "USB-C"; + power-role = "dual"; + try-power-role = "sink"; + data-role = "dual"; + source-pdos = ; + sink-pdos = ; + op-sink-microwatt = <10000000>; + }; + }; +}; + +&i2c4 { + status = "okay"; + /* TODO: Add ADC INA230 */ + + mp5023@40 { + compatible = "mps,mp5023"; + reg = <0x40>; + }; + + tmp421@4f { + compatible = "ti,tmp421"; + reg = <0x4f>; + }; + + sled4_ioexp: pca9539@76 { + compatible = "nxp,pca9539"; + reg = <0x76>; + #address-cells = <1>; + #size-cells = <0>; + gpio-controller; + #gpio-cells = <2>; + + gpio-line-names = + "SLED4_MS_DETECT1","SLED4_VBUS_BMC_EN","SLED4_INA230_ALERT","SLED4_P12V_STBY_ALERT", + "SLED4_SSD_ALERT","SLED4_MS_DETECT0","SLED4_RST_CCG5","SLED4_FUSB302_INT", + "SLED4_MD_STBY_RESET","SLED4_MD_IOEXP_EN_FAULT","SLED4_MD_DIR","SLED4_MD_DECAY", + "SLED4_MD_MODE1","SLED4_MD_MODE2","SLED4_MD_MODE3","power-host4"; + }; + + sled4_leds: pca9552@67 { + compatible = "nxp,pca9552"; + reg = <0x67>; + #address-cells = <1>; + #size-cells = <0>; + gpio-controller; + #gpio-cells = <2>; + + gpio-line-names = + "led-sled4-amber","led-sled4-blue","SLED4_RST_IOEXP","", + "","","","", + "","","","", + "","","",""; + }; + + sled4_fusb302: typec-portc@22 { + compatible = "fcs,fusb302"; + reg = <0x22>; + + connector { + compatible = "usb-c-connector"; + label = "USB-C"; + power-role = "dual"; + try-power-role = "sink"; + data-role = "dual"; + source-pdos = ; + sink-pdos = ; + op-sink-microwatt = <10000000>; + }; + }; +}; + +&i2c5 { + status = "okay"; + /* TODO: Add ADC INA230 */ + + mp5023@40 { + compatible = "mps,mp5023"; + reg = <0x40>; + }; + + tmp421@4f { + compatible = "ti,tmp421"; + reg = <0x4f>; + }; + + sled5_ioexp: pca9539@76 { + compatible = "nxp,pca9539"; + reg = <0x76>; + #address-cells = <1>; + #size-cells = <0>; + gpio-controller; + #gpio-cells = <2>; + + gpio-line-names = + "SLED5_MS_DETECT1","SLED5_VBUS_BMC_EN","SLED5_INA230_ALERT","SLED5_P12V_STBY_ALERT", + "SLED5_SSD_ALERT","SLED5_MS_DETECT0","SLED5_RST_CCG5","SLED5_FUSB302_INT", + "SLED5_MD_STBY_RESET","SLED5_MD_IOEXP_EN_FAULT","SLED5_MD_DIR","SLED5_MD_DECAY", + "SLED5_MD_MODE1","SLED5_MD_MODE2","SLED5_MD_MODE3","power-host5"; + }; + + sled5_leds: pca9552@67 { + compatible = "nxp,pca9552"; + reg = <0x67>; + #address-cells = <1>; + #size-cells = <0>; + gpio-controller; + #gpio-cells = <2>; + + gpio-line-names = + "led-sled5-amber","led-sled5-blue","SLED5_RST_IOEXP","", + "","","","", + "","","","", + "","","",""; + }; + + sled5_fusb302: typec-portc@22 { + compatible = "fcs,fusb302"; + reg = <0x22>; + + connector { + compatible = "usb-c-connector"; + label = "USB-C"; + power-role = "dual"; + try-power-role = "sink"; + data-role = "dual"; + source-pdos = ; + sink-pdos = ; + op-sink-microwatt = <10000000>; + }; + }; +}; + +&i2c6 { + status = "okay"; + + eeprom@56 { + compatible = "atmel,24c64"; + reg = <0x56>; + }; + + rtc@51 { + compatible = "nxp,pcf85263"; + reg = <0x51>; + }; +}; + +&i2c7 { + status = "okay"; + + eeprom@54 { + compatible = "atmel,24c64"; + reg = <0x54>; + }; +}; + +&i2c9 { + status = "okay"; + + tmp421@4f { + compatible = "ti,tmp421"; + reg = <0x4f>; + }; +}; + +&i2c10 { + status = "okay"; + + tmp421@4f { + compatible = "ti,tmp421"; + reg = <0x4f>; + }; + + hdc1080@40 { + compatible = "ti,hdc1080"; + reg = <0x40>; + }; + + front_leds: pca9552@67 { + compatible = "nxp,pca9552"; + reg = <0x67>; + #address-cells = <1>; + #size-cells = <0>; + gpio-controller; + #gpio-cells = <2>; + + gpio-line-names = + "led-fault-identify","power-p5v-stby-good", + "power-p1v0-dvdd-good","power-p1v0-avdd-good", + "","","","", + "","","","", + "","","",""; + }; +}; + +&i2c12 { + status = "okay"; + + adm1278@11 { + compatible = "adi,adm1278"; + reg = <0x11>; + }; + + tmp421@4c { + compatible = "ti,tmp421"; + reg = <0x4c>; + }; + + tmp421@4d { + compatible = "ti,tmp421"; + reg = <0x4d>; + }; + + fan_ioexp: pca9552@67 { + compatible = "nxp,pca9552"; + reg = <0x67>; + #address-cells = <1>; + #size-cells = <0>; + gpio-controller; + #gpio-cells = <2>; + + gpio-line-names = + "presence-fan0","presence-fan1", + "presence-fan2","presence-fan3", + "power-fan0-good","power-fan1-good", + "power-fan2-good","power-fan3-good", + "","","","", + "","","",""; + }; +}; + +&i2c13 { + multi-master; + aspeed,hw-timeout-ms = <1000>; + status = "okay"; +}; + +&gpio0 { + gpio-line-names = + /*A0-A7*/ "","","","","","","","", + /*B0-B7*/ "","","SEL_SPI2_MUX","SPI2_MUX1", + "SPI2_MUX2","SPI2_MUX3","","", + /*C0-C7*/ "","","","","","","","", + /*D0-D7*/ "","","","","","","","", + /*E0-E7*/ "","","","","","","","", + /*F0-F7*/ "","","","","","","","", + /*G0-G7*/ "","SWITCH_FRU_MUX","","","","","","", + /*H0-H7*/ "presence-riser1","presence-riser2", + "presence-sled0","presence-sled1", + "presence-sled2","presence-sled3", + "presence-sled4","presence-sled5", + /*I0-I7*/ "REV_ID0","","REV_ID1","REV_ID2", + "","","","", + /*J0-J7*/ "","","","","","","","", + /*K0-K7*/ "","","","","","","","", + /*L0-L7*/ "","","","","","","","", + /*M0-M7*/ "ALERT_SLED0","ALERT_SLED1", + "ALERT_SLED2","ALERT_SLED3", + "ALERT_SLED4","ALERT_SLED5", + "P12V_AUX_ALERT1","", + /*N0-N7*/ "","","","","","","","", + /*O0-O7*/ "","","","", + "","BOARD_ID0","BOARD_ID1","BOARD_ID2", + /*P0-P7*/ "","","","","","","","", + /*Q0-Q7*/ "","","","","","","","", + /*R0-R7*/ "","","","","","","","", + /*S0-S7*/ "","","","BAT_DETECT", + "BMC_BT_WP0","BMC_BT_WP1","","", + /*T0-T7*/ "","","","","","","","", + /*U0-U7*/ "","","","","","","","", + /*V0-V7*/ "","RST_BMC_MVL","","", + "USB2_SEL0_A","USB2_SEL1_A", + "USB2_SEL0_B","USB2_SEL1_B", + /*W0-W7*/ "RST_FRONT_IOEXP","","","","","","","", + /*X0-X7*/ "","","","","","","","", + /*Y0-Y7*/ "","","BSM_FLASH_LATCH","","","","","", + /*Z0-Z7*/ "","","","","","","",""; +}; + +&adc0 { + vref = <1800>; + status = "okay"; + + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_adc0_default &pinctrl_adc1_default + &pinctrl_adc2_default &pinctrl_adc3_default + &pinctrl_adc4_default &pinctrl_adc5_default + &pinctrl_adc6_default &pinctrl_adc7_default>; +}; + +&adc1 { + vref = <2500>; + status = "okay"; + + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_adc8_default &pinctrl_adc9_default + &pinctrl_adc10_default &pinctrl_adc11_default + &pinctrl_adc12_default &pinctrl_adc13_default + &pinctrl_adc14_default &pinctrl_adc15_default>; +}; From 4fcbe1f5b6ba71e0c464a303e3769bf1ce1fe54c Mon Sep 17 00:00:00 2001 From: Oskar Senft Date: Tue, 30 Nov 2021 13:48:55 -0500 Subject: [PATCH 11/17] ARM: dts: aspeed: tyan-s7106: Add uart_routing and fix vuart config Configure the vuart in such a way that it does not inhibit the SuperIO's UART from functioning correctly. This allows the same DTS to be used for both configurations with SuperIO and VUART (depending on the BIOS build). The decision on whether to actually enable VUART can then be made at runtime. This change also enables the new uart_routing driver for the SuperIO case. Signed-off-by: Oskar Senft Link: https://lore.kernel.org/r/20211130184855.1779353-1-osk@google.com Signed-off-by: Joel Stanley --- arch/arm/boot/dts/aspeed-bmc-tyan-s7106.dts | 16 ++++++++++++++++ 1 file changed, 16 insertions(+) diff --git a/arch/arm/boot/dts/aspeed-bmc-tyan-s7106.dts b/arch/arm/boot/dts/aspeed-bmc-tyan-s7106.dts index 60ac6d3f03b5..aff27c1d4b06 100644 --- a/arch/arm/boot/dts/aspeed-bmc-tyan-s7106.dts +++ b/arch/arm/boot/dts/aspeed-bmc-tyan-s7106.dts @@ -3,6 +3,7 @@ #include "aspeed-g5.dtsi" #include +#include / { model = "Tyan S7106 BMC"; @@ -127,8 +128,23 @@ status = "okay"; }; +&uart_routing { + status = "okay"; +}; + &vuart { status = "okay"; + + /* We enable the VUART here, but leave it in a state that does + * not interfere with the SuperIO. The goal is to have both the + * VUART and the SuperIO available and decide at runtime whether + * the VUART should actually be used. For that reason, configure + * an "invalid" IO address and an IRQ that is not used by the + * BMC. + */ + + aspeed,lpc-io-reg = <0xffff>; + aspeed,lpc-interrupts = <15 IRQ_TYPE_LEVEL_HIGH>; }; &lpc_ctrl { From 30daf3cd8997d0ba4bda2b4a7f7c5122c81216f1 Mon Sep 17 00:00:00 2001 From: Ali El-Haj-Mahmoud Date: Tue, 30 Nov 2021 13:01:10 -0500 Subject: [PATCH 12/17] ARM: dts: aspeed: Add TYAN S8036 BMC machine The TYAN S8036 is a server platform with an ASPEED AST2500 BMC. Signed-off-by: Ali El-Haj-Mahmoud Reviewed-by: Joel Stanley Link: https://lore.kernel.org/r/20211130180110.2217042-1-aaelhaj@google.com Signed-off-by: Joel Stanley --- arch/arm/boot/dts/Makefile | 1 + arch/arm/boot/dts/aspeed-bmc-tyan-s8036.dts | 470 ++++++++++++++++++++ 2 files changed, 471 insertions(+) create mode 100644 arch/arm/boot/dts/aspeed-bmc-tyan-s8036.dts diff --git a/arch/arm/boot/dts/Makefile b/arch/arm/boot/dts/Makefile index 6ff97305200d..25005a7b5b84 100644 --- a/arch/arm/boot/dts/Makefile +++ b/arch/arm/boot/dts/Makefile @@ -1521,6 +1521,7 @@ dtb-$(CONFIG_ARCH_ASPEED) += \ aspeed-bmc-supermicro-x11spi.dtb \ aspeed-bmc-inventec-transformers.dtb \ aspeed-bmc-tyan-s7106.dtb \ + aspeed-bmc-tyan-s8036.dtb \ aspeed-bmc-vegman-n110.dtb \ aspeed-bmc-vegman-rx20.dtb \ aspeed-bmc-vegman-sx20.dtb diff --git a/arch/arm/boot/dts/aspeed-bmc-tyan-s8036.dts b/arch/arm/boot/dts/aspeed-bmc-tyan-s8036.dts new file mode 100644 index 000000000000..708ee78e4b83 --- /dev/null +++ b/arch/arm/boot/dts/aspeed-bmc-tyan-s8036.dts @@ -0,0 +1,470 @@ +// SPDX-License-Identifier: GPL-2.0+ +/dts-v1/; + +#include "aspeed-g5.dtsi" +#include +#include + +/ { + model = "Tyan S8036 BMC"; + compatible = "tyan,s8036-bmc", "aspeed,ast2500"; + + chosen { + stdout-path = &uart5; + bootargs = "console=ttyS4,115200 earlycon"; + }; + + memory@80000000 { + device_type = "memory"; + reg = <0x80000000 0x20000000>; + }; + + reserved-memory { + #address-cells = <1>; + #size-cells = <1>; + ranges; + + p2a_memory: region@987f0000 { + no-map; + reg = <0x987f0000 0x00010000>; /* 64KB */ + }; + + vga_memory: framebuffer@9f000000 { + no-map; + reg = <0x9f000000 0x01000000>; /* 16M */ + }; + + gfx_memory: framebuffer { + size = <0x01000000>; /* 16M */ + alignment = <0x01000000>; + compatible = "shared-dma-pool"; + reusable; + }; + }; + + leds { + compatible = "gpio-leds"; + + identify { + gpios = <&gpio ASPEED_GPIO(A, 2) GPIO_ACTIVE_LOW>; + }; + + heartbeat { + gpios = <&gpio ASPEED_GPIO(E, 7) GPIO_ACTIVE_LOW>; + }; + }; + + iio-hwmon { + compatible = "iio-hwmon"; + io-channels = <&adc 0>, <&adc 1>, <&adc 2>, <&adc 3>, + <&adc 4>, <&adc 5>, <&adc 6>, <&adc 7>, + <&adc 8>, <&adc 9>, <&adc 10>, <&adc 11>, + <&adc 12>, <&adc 13>, <&adc 14>; + }; + + iio-hwmon-battery { + compatible = "iio-hwmon"; + io-channels = <&adc 15>; + }; +}; + +&fmc { + status = "okay"; + flash@0 { + label = "bmc"; + status = "okay"; + m25p,fast-read; +#include "openbmc-flash-layout.dtsi" + }; +}; + +&spi1 { + status = "okay"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_spi1_default>; + + flash@0 { + status = "okay"; + label = "pnor"; + m25p,fast-read; + }; +}; + +&uart1 { + /* Rear RS-232 connector */ + status = "okay"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_txd1_default + &pinctrl_rxd1_default>; +}; + +&uart2 { + /* RS-232 connector on header */ + status = "okay"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_txd2_default + &pinctrl_rxd2_default>; +}; + +&uart3 { + /* Alternative to vuart to internally connect (route) to uart1 + * when vuart cannot be used due to BIOS limitations. + */ + status = "okay"; +}; + +&uart4 { + /* Alternative to vuart to internally connect (route) to the + * external port usually used by uart1 when vuart cannot be + * used due to BIOS limitations. + */ + status = "okay"; +}; + +&uart5 { + /* BMC "debug" (console) UART; connected to RS-232 connector + * on header; selectable via jumpers as alternative to uart2 + */ + status = "okay"; +}; + +&uart_routing { + status = "okay"; +}; + +&vuart { + status = "okay"; + + /* We enable the VUART here, but leave it in a state that does + * not interfere with the SuperIO. The goal is to have both the + * VUART and the SuperIO available and decide at runtime whether + * the VUART should actually be used. For that reason, configure + * an "invalid" IO address and an IRQ that is not used by the + * BMC. + */ + aspeed,lpc-io-reg = <0xffff>; + aspeed,lpc-interrupts = <15 IRQ_TYPE_LEVEL_HIGH>; +}; + +&lpc_ctrl { + status = "okay"; +}; + +&p2a { + status = "okay"; + memory-region = <&p2a_memory>; +}; + +&lpc_snoop { + status = "okay"; + snoop-ports = <0x80>; +}; + +&adc { + status = "okay"; +}; + +&vhub { + status = "okay"; +}; + +&pwm_tacho { + status = "okay"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_pwm0_default + &pinctrl_pwm1_default + &pinctrl_pwm3_default + &pinctrl_pwm4_default>; + + /* CPU fan */ + fan@0 { + reg = <0x00>; + aspeed,fan-tach-ch = /bits/ 8 <0x00>; + }; + + /* PWM group for chassis fans #1, #2, #3 and #4 */ + fan@2 { + reg = <0x03>; + aspeed,fan-tach-ch = /bits/ 8 <0x02>; + }; + + fan@3 { + reg = <0x03>; + aspeed,fan-tach-ch = /bits/ 8 <0x03>; + }; + + fan@4 { + reg = <0x03>; + aspeed,fan-tach-ch = /bits/ 8 <0x04>; + }; + + fan@5 { + reg = <0x03>; + aspeed,fan-tach-ch = /bits/ 8 <0x05>; + }; + + /* PWM group for chassis fans #5 and #6 */ + fan@6 { + reg = <0x04>; + aspeed,fan-tach-ch = /bits/ 8 <0x06>; + }; + + fan@7 { + reg = <0x04>; + aspeed,fan-tach-ch = /bits/ 8 <0x07>; + }; +}; + +&i2c0 { + /* Directly connected to Sideband-Temperature Sensor Interface (APML) */ + status = "okay"; +}; + +&i2c1 { + /* Directly connected to IPMB HDR. */ + status = "okay"; +}; + +&i2c2 { + status = "okay"; + + /* BMC EEPROM, incl. mainboard FRU */ + eeprom@50 { + compatible = "atmel,24c256"; + reg = <0x50>; + }; + /* Also connected to: + * - BCM5720 + * - FPGA + * - FAN HDR + * - FPIO HDR + */ +}; + +&i2c3 { + status = "okay"; + + /* PSU1 FRU @ 0xA0 */ + eeprom@50 { + compatible = "atmel,24c02"; + reg = <0x50>; + }; + + /* PSU2 FRU @ 0xA2 */ + eeprom@51 { + compatible = "atmel,24c02"; + reg = <0x51>; + }; + + /* PSU1 @ 0xB0 */ + power-supply@58 { + compatible = "pmbus"; + reg = <0x58>; + }; + + /* PSU2 @ 0xB2 */ + power-supply@59 { + compatible = "pmbus"; + reg = <0x59>; + }; + +}; + +&i2c4 { + status = "okay"; +}; + +&i2c5 { + status = "okay"; + /* Hardware monitor with temperature sensors */ + nct7802@28 { + compatible = "nuvoton,nct7802"; + reg = <0x28>; + #address-cells = <1>; + #size-cells = <0>; + + channel@0 { /* LTD */ + reg = <0>; + status = "okay"; + }; + + channel@1 { /* RTD1 */ + reg = <1>; + status = "okay"; + sensor-type = "temperature"; + temperature-mode = "thermistor"; + }; + + channel@2 { /* RTD2 */ + reg = <2>; + status = "okay"; + sensor-type = "temperature"; + temperature-mode = "thermistor"; + }; + + channel@3 { /* RTD3 */ + reg = <3>; + status = "okay"; + sensor-type = "temperature"; + }; + }; + + /* Also connected to: + * - PCA9544 + * - CLK BUFF + * - OCP FRU + */ +}; + +&i2c6 { + status = "okay"; + /* Connected to: + * - PCA9548 @0xE0 + * - PCA9548 @0xE2 + * - PCA9544 @0xE4 + */ +}; + +&i2c7 { + status = "okay"; + + /* Connected to: + * - PCH SMBUS #4 + */ +}; + +&i2c8 { + status = "okay"; + + /* Not connected */ +}; + +&mac0 { + status = "okay"; + use-ncsi; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_rmii1_default>; +}; + +&mac1 { + status = "okay"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_rgmii2_default &pinctrl_mdio2_default>; +}; + +&ibt { + status = "okay"; +}; + +&kcs1 { + status = "okay"; + aspeed,lpc-io-reg = <0xca8>; +}; + +&kcs3 { + status = "okay"; + aspeed,lpc-io-reg = <0xca2>; +}; + +/* Enable BMC VGA output to show an early (pre-BIOS) boot screen */ +&gfx { + status = "okay"; + memory-region = <&gfx_memory>; +}; + +/* We're following the GPIO naming as defined at + * https://github.com/openbmc/docs/blob/master/designs/device-tree-gpio-naming.md. + * + * Notes on led-identify and id-button: + * - A physical button is connected to id-button which + * triggers the clock on a D flip-flop. The /Q output of the + * flip-flop drives its D input. + * - The flip-flop's Q output drives led-identify which is + * connected to LEDs. + * - With that, every button press toggles the LED between on and off. + * + * Notes on power-, reset- and nmi- button and control: + * - The -button signals can be used to monitor physical buttons. + * - The -control signals can be used to actuate the specific + * operation. + * - In hardware, the -button signals are connected to the -control + * signals through drivers with the -control signals being + * protected through diodes. + */ +&gpio { + status = "okay"; + gpio-line-names = + /*A0*/ "", + /*A1*/ "", + /*A2*/ "led-identify", /* in/out: BMC_CHASSIS_ID_LED_L */ + /*A3*/ "", + /*A4*/ "", + /*A5*/ "", + /*A6*/ "", + /*A7*/ "", + /*B0-B7*/ "","","","","","","","", + /*C0-C7*/ "","","","","","","","", + /*D0*/ "", + /*D1*/ "", + /*D2*/ "power-chassis-good", /* in: PWR_GOOD_LED -- Check if this is Z3?*/ + /*D3*/ "platform-reset", /* in: RESET_LED_L */ + /*D4*/ "", + /*D5*/ "", + /*D6*/ "", + /*D7*/ "", + /*E0*/ "power-button", /* in: BMC_SYS_MON_PWR_BTN_L */ + /*E1*/ "power-chassis-control", /* out: BMC_ASSERT_PWR_BTN */ + /*E2*/ "reset-button", /* in: BMC_SYS_MOS_RST_BTN_L*/ + /*E3*/ "reset-control", /* out: BMC_ASSERT_RST_BTN */ + /*E4*/ "nmi-button", /* in: BMC_SYS_MON_NMI_BTN_L */ + /*E5*/ "nmi-control", /* out: BMC_ASSERT_NMI_BTN */ + /*E6*/ "TSI_RESERT", + /*E7*/ "led-heartbeat", /* out: BMC_GPIOE7 */ + /*F0*/ "", + /*F1*/ "clear-cmos-control", /* out: BMC_ASSERT_CLR_CMOS_L */ + /*F2*/ "", + /*F3*/ "", + /*F4*/ "led-fault", /* out: BMC_HWM_FAULT_LED_L */ + /*F5*/ "BMC_SYS_FAULT_LED_L", + /*F6*/ "BMC_ASSERT_BIOS_WP_L", + /*F7*/ "", + /*G0-G7*/ "","","","","","","","", + /*H0-H7*/ "","","","","","","","", + /*I0-I7*/ "","","","","","","","", + /*J0-J7*/ "","","","","","","","", + /*K0-K7*/ "","","","","","","","", + /*L0-L7*/ "","","","","","","","", + /*M0-M7*/ "","","","","","","","", + /*N0-N7*/ "","","","","","","","", + /*O0-O7*/ "","","","","","","","", + /*P0-P7*/ "","","","","","","","", + /*Q0*/ "", + /*Q1*/ "", + /*Q2*/ "", + /*Q3*/ "", + /*Q4*/ "", + /*Q5*/ "", + /*Q6*/ "id-button", /* in: BMC_CHASSIS_ID_BTN_L */ + /*Q7*/ "", + /*R0-R7*/ "","","","","","","","", + /*S0-S7*/ "","","","","","","","", + /*T0-T7*/ "","","","","","","","", + /*U0-U7*/ "","","","","","","","", + /*V0-V7*/ "","","","","","","","", + /*W0-W7*/ "","","","","","","","", + /*X0-X7*/ "","","","","","","","", + /*Y0-Y7*/ "","","","","","","","", + /*Z0-Z2*/ "","","", + /*Z3*/ "post-complete", /* BMC_SYS_MON_PWROK */ + /*Z4-Z7*/ "","","","", + /*AA0*/ "", + /*AA1*/ "", + /*AA2*/ "", + /*AA3*/ "", + /*AA4*/ "", + /*AA5*/ "", + /*AA6*/ "", + /*AA7*/ "BMC_ASSERT_BMC_READY", + /*AB0*/ "BMC_SPD_SEL", + /*AB1-AB7*/ "","","","","","",""; +}; From 1fe5c05c7c25b5ffa66d623c790f39babd2f5e7f Mon Sep 17 00:00:00 2001 From: Eddie James Date: Wed, 8 Dec 2021 11:06:40 -0600 Subject: [PATCH 13/17] ARM: dts: aspeed: p10: Enable USB host ports Ensure both controllers are enabled on, and add GPIO hog for USB power control to set the USB power to always on. Signed-off-by: Eddie James Link: https://lore.kernel.org/r/20211208170641.13322-1-eajames@linux.ibm.com Signed-off-by: Joel Stanley --- arch/arm/boot/dts/aspeed-bmc-ibm-everest.dts | 12 +++++++++++- arch/arm/boot/dts/aspeed-bmc-ibm-rainier.dts | 6 ++++++ 2 files changed, 17 insertions(+), 1 deletion(-) diff --git a/arch/arm/boot/dts/aspeed-bmc-ibm-everest.dts b/arch/arm/boot/dts/aspeed-bmc-ibm-everest.dts index f42e2d776ba8..3e9edc893f55 100644 --- a/arch/arm/boot/dts/aspeed-bmc-ibm-everest.dts +++ b/arch/arm/boot/dts/aspeed-bmc-ibm-everest.dts @@ -280,7 +280,7 @@ /*L0-L7*/ "","","","","","","","", /*M0-M7*/ "","","","","","","","", /*N0-N7*/ "","","","","","","","", - /*O0-O7*/ "","","","","","","","", + /*O0-O7*/ "","","","usb-power","","","","", /*P0-P7*/ "","","","","led-pcieslot-power","","","", /*Q0-Q7*/ "","","regulator-standby-faulted","","","","","", /*R0-R7*/ "bmc-tpm-reset","power-chassis-control","power-chassis-good","","","I2C_FLASH_MICRO_N","","", @@ -292,6 +292,12 @@ /*X0-X7*/ "","","","","","","","", /*Y0-Y7*/ "","","","","","","","", /*Z0-Z7*/ "","","","","","","",""; + + usb_power { + gpio-hog; + gpios = ; + output-high; + }; }; &i2c0 { @@ -2375,6 +2381,10 @@ }; }; +&ehci0 { + status = "okay"; +}; + &ehci1 { status = "okay"; }; diff --git a/arch/arm/boot/dts/aspeed-bmc-ibm-rainier.dts b/arch/arm/boot/dts/aspeed-bmc-ibm-rainier.dts index 866f32cdccea..cb7d86a2862c 100644 --- a/arch/arm/boot/dts/aspeed-bmc-ibm-rainier.dts +++ b/arch/arm/boot/dts/aspeed-bmc-ibm-rainier.dts @@ -275,6 +275,12 @@ output-high; line-name = "I2C3_MUX_OE_N"; }; + + usb_power { + gpio-hog; + gpios = ; + output-high; + }; }; &emmc_controller { From 62589e873d8e7cef7efd583ace1bb6ec90f252b7 Mon Sep 17 00:00:00 2001 From: Eddie James Date: Wed, 8 Dec 2021 13:17:57 -0600 Subject: [PATCH 14/17] ARM: dts: aspeed: p10: Add TPM device Add the Nuvoton NPCT75X, a TIS I2C TPM. Modified Eddie's change to include the general compatible string, and combine the rainier and everest patches. Signed-off-by: Eddie James Link: https://lore.kernel.org/r/20211208191758.20517-8-eajames@linux.ibm.com Signed-off-by: Joel Stanley --- arch/arm/boot/dts/aspeed-bmc-ibm-everest.dts | 5 +++++ arch/arm/boot/dts/aspeed-bmc-ibm-rainier.dts | 5 +++++ 2 files changed, 10 insertions(+) diff --git a/arch/arm/boot/dts/aspeed-bmc-ibm-everest.dts b/arch/arm/boot/dts/aspeed-bmc-ibm-everest.dts index 3e9edc893f55..22c06ff7a7ed 100644 --- a/arch/arm/boot/dts/aspeed-bmc-ibm-everest.dts +++ b/arch/arm/boot/dts/aspeed-bmc-ibm-everest.dts @@ -1887,6 +1887,11 @@ &i2c12 { status = "okay"; + + tpm@2e { + compatible = "nuvoton,npct75x", "tcg,tpm-tis-i2c"; + reg = <0x2e>; + }; }; &i2c13 { diff --git a/arch/arm/boot/dts/aspeed-bmc-ibm-rainier.dts b/arch/arm/boot/dts/aspeed-bmc-ibm-rainier.dts index cb7d86a2862c..c47974219832 100644 --- a/arch/arm/boot/dts/aspeed-bmc-ibm-rainier.dts +++ b/arch/arm/boot/dts/aspeed-bmc-ibm-rainier.dts @@ -2067,6 +2067,11 @@ &i2c12 { status = "okay"; + tpm@2e { + compatible = "nuvoton,npct75x"; + reg = <0x2e>; + }; + eeprom@50 { compatible = "atmel,24c64"; reg = <0x50>; From a350dc623e3678b9bc6c6385df72a66a1ee69c7f Mon Sep 17 00:00:00 2001 From: Jae Hyun Yoo Date: Mon, 8 Nov 2021 11:01:55 -0800 Subject: [PATCH 15/17] ARM: dts: aspeed: add LCLK setting into LPC IBT node If LPC BT driver is registered ahead of lpc-ctrl module, LPC BT hardware block will be enabled without heart beating of LCLK until lpc-ctrl enables the LCLK. This issue causes improper handling on host interrupts when the host sends interrupts in that time frame. Then kernel eventually forcibly disables the interrupt with dumping stack and printing a 'nobody cared this irq' message out. To prevent this issue, all LPC sub drivers should enable LCLK individually so this patch adds 'clocks' property setting into LPC IBT node as one of required properties to enable the LCLK by the LPC IBT driver. Note: dtbs should be re-compiled after applying this change since it's adding a new required property otherwise the driver will not be probed correctly. Signed-off-by: Jae Hyun Yoo Reviewed-by: Joel Stanley Reviewed-by: Andrew Jeffery Link: https://lore.kernel.org/r/20211108190200.290957-2-jae.hyun.yoo@intel.com Signed-off-by: Joel Stanley --- arch/arm/boot/dts/aspeed-g4.dtsi | 1 + arch/arm/boot/dts/aspeed-g5.dtsi | 1 + arch/arm/boot/dts/aspeed-g6.dtsi | 1 + 3 files changed, 3 insertions(+) diff --git a/arch/arm/boot/dts/aspeed-g4.dtsi b/arch/arm/boot/dts/aspeed-g4.dtsi index b313a1cf5f73..f14dace34c5a 100644 --- a/arch/arm/boot/dts/aspeed-g4.dtsi +++ b/arch/arm/boot/dts/aspeed-g4.dtsi @@ -381,6 +381,7 @@ compatible = "aspeed,ast2400-ibt-bmc"; reg = <0x140 0x18>; interrupts = <8>; + clocks = <&syscon ASPEED_CLK_GATE_LCLK>; status = "disabled"; }; diff --git a/arch/arm/boot/dts/aspeed-g5.dtsi b/arch/arm/boot/dts/aspeed-g5.dtsi index c7049454c7cb..d0cc4be2de59 100644 --- a/arch/arm/boot/dts/aspeed-g5.dtsi +++ b/arch/arm/boot/dts/aspeed-g5.dtsi @@ -507,6 +507,7 @@ compatible = "aspeed,ast2500-ibt-bmc"; reg = <0x140 0x18>; interrupts = <8>; + clocks = <&syscon ASPEED_CLK_GATE_LCLK>; status = "disabled"; }; }; diff --git a/arch/arm/boot/dts/aspeed-g6.dtsi b/arch/arm/boot/dts/aspeed-g6.dtsi index 16b36c13695a..539edbd7aaee 100644 --- a/arch/arm/boot/dts/aspeed-g6.dtsi +++ b/arch/arm/boot/dts/aspeed-g6.dtsi @@ -586,6 +586,7 @@ compatible = "aspeed,ast2600-ibt-bmc"; reg = <0x140 0x18>; interrupts = ; + clocks = <&syscon ASPEED_CLK_GATE_LCLK>; status = "disabled"; }; }; From 002c42d37e45ff5b5248576c77437ccafb651454 Mon Sep 17 00:00:00 2001 From: Jae Hyun Yoo Date: Mon, 8 Nov 2021 11:01:56 -0800 Subject: [PATCH 16/17] dt-bindings: ipmi: bt-bmc: add 'clocks' as a required property If LPC BT driver is registered ahead of lpc-ctrl module, LPC BT hardware block will be enabled without heart beating of LCLK until lpc-ctrl enables the LCLK. This issue causes improper handling on host interrupts when the host sends interrupts in that time frame. Then kernel eventually forcibly disables the interrupt with dumping stack and printing a 'nobody cared this irq' message out. To prevent this issue, all LPC sub drivers should enable LCLK individually so this patch adds 'clocks' property as one of required properties to enable the LCLK by the LPC IBT driver. Note: dtsi change in this patch series should be applied along with, and dtbs should be re-compiled after applying this series since it's adding a new required property otherwise the driver will not be probed correctly. Signed-off-by: Jae Hyun Yoo Reviewed-by: Rob Herring Link: https://lore.kernel.org/r/20211108190200.290957-3-jae.hyun.yoo@intel.com Signed-off-by: Joel Stanley --- .../devicetree/bindings/ipmi/aspeed,ast2400-ibt-bmc.txt | 2 ++ 1 file changed, 2 insertions(+) diff --git a/Documentation/devicetree/bindings/ipmi/aspeed,ast2400-ibt-bmc.txt b/Documentation/devicetree/bindings/ipmi/aspeed,ast2400-ibt-bmc.txt index c9902fd4b38b..25f86da804b7 100644 --- a/Documentation/devicetree/bindings/ipmi/aspeed,ast2400-ibt-bmc.txt +++ b/Documentation/devicetree/bindings/ipmi/aspeed,ast2400-ibt-bmc.txt @@ -11,6 +11,7 @@ Required properties: "aspeed,ast2500-ibt-bmc" "aspeed,ast2600-ibt-bmc" - reg: physical address and size of the registers +- clocks: clock for the device Optional properties: @@ -23,4 +24,5 @@ Example: compatible = "aspeed,ast2400-ibt-bmc"; reg = <0x1e789140 0x18>; interrupts = <8>; + clocks = <&syscon ASPEED_CLK_GATE_LCLK>; }; From 45cd8bbaaa18ab1c4f4387529db72b33be463197 Mon Sep 17 00:00:00 2001 From: Jae Hyun Yoo Date: Mon, 8 Nov 2021 11:01:58 -0800 Subject: [PATCH 17/17] ARM: dts: aspeed: add LCLK setting into LPC KCS nodes If LPC KCS driver is registered ahead of lpc-ctrl module, LPC KCS hardware block will be enabled without heart beating of LCLK until lpc-ctrl enables the LCLK. This issue causes improper handling on host interrupts when the host sends interrupts in that time frame. Then kernel eventually forcibly disables the interrupt with dumping stack and printing a 'nobody cared this irq' message out. To prevent this issue, all LPC sub drivers should enable LCLK individually so this patch adds 'clocks' property setting into LPC KCS node as one of required properties to enable the LCLK by the LPC KCS driver. Note: dtbs should be re-compiled after applying this change since it's adding a new required property otherwise the driver will not be probed correctly. Signed-off-by: Jae Hyun Yoo Reviewed-by: Joel Stanley Reviewed-by: Andrew Jeffery Link: https://lore.kernel.org/r/20211108190200.290957-5-jae.hyun.yoo@intel.com Signed-off-by: Joel Stanley --- arch/arm/boot/dts/aspeed-g5.dtsi | 4 ++++ arch/arm/boot/dts/aspeed-g6.dtsi | 4 ++++ 2 files changed, 8 insertions(+) diff --git a/arch/arm/boot/dts/aspeed-g5.dtsi b/arch/arm/boot/dts/aspeed-g5.dtsi index d0cc4be2de59..7495f93c5069 100644 --- a/arch/arm/boot/dts/aspeed-g5.dtsi +++ b/arch/arm/boot/dts/aspeed-g5.dtsi @@ -446,6 +446,7 @@ compatible = "aspeed,ast2500-kcs-bmc-v2"; reg = <0x24 0x1>, <0x30 0x1>, <0x3c 0x1>; interrupts = <8>; + clocks = <&syscon ASPEED_CLK_GATE_LCLK>; status = "disabled"; }; @@ -453,6 +454,7 @@ compatible = "aspeed,ast2500-kcs-bmc-v2"; reg = <0x28 0x1>, <0x34 0x1>, <0x40 0x1>; interrupts = <8>; + clocks = <&syscon ASPEED_CLK_GATE_LCLK>; status = "disabled"; }; @@ -460,6 +462,7 @@ compatible = "aspeed,ast2500-kcs-bmc-v2"; reg = <0x2c 0x1>, <0x38 0x1>, <0x44 0x1>; interrupts = <8>; + clocks = <&syscon ASPEED_CLK_GATE_LCLK>; status = "disabled"; }; @@ -467,6 +470,7 @@ compatible = "aspeed,ast2500-kcs-bmc-v2"; reg = <0x114 0x1>, <0x118 0x1>, <0x11c 0x1>; interrupts = <8>; + clocks = <&syscon ASPEED_CLK_GATE_LCLK>; status = "disabled"; }; diff --git a/arch/arm/boot/dts/aspeed-g6.dtsi b/arch/arm/boot/dts/aspeed-g6.dtsi index 539edbd7aaee..c32e87fad4dc 100644 --- a/arch/arm/boot/dts/aspeed-g6.dtsi +++ b/arch/arm/boot/dts/aspeed-g6.dtsi @@ -525,6 +525,7 @@ compatible = "aspeed,ast2500-kcs-bmc-v2"; reg = <0x24 0x1>, <0x30 0x1>, <0x3c 0x1>; interrupts = ; + clocks = <&syscon ASPEED_CLK_GATE_LCLK>; kcs_chan = <1>; status = "disabled"; }; @@ -533,6 +534,7 @@ compatible = "aspeed,ast2500-kcs-bmc-v2"; reg = <0x28 0x1>, <0x34 0x1>, <0x40 0x1>; interrupts = ; + clocks = <&syscon ASPEED_CLK_GATE_LCLK>; status = "disabled"; }; @@ -540,6 +542,7 @@ compatible = "aspeed,ast2500-kcs-bmc-v2"; reg = <0x2c 0x1>, <0x38 0x1>, <0x44 0x1>; interrupts = ; + clocks = <&syscon ASPEED_CLK_GATE_LCLK>; status = "disabled"; }; @@ -547,6 +550,7 @@ compatible = "aspeed,ast2500-kcs-bmc-v2"; reg = <0x114 0x1>, <0x118 0x1>, <0x11c 0x1>; interrupts = ; + clocks = <&syscon ASPEED_CLK_GATE_LCLK>; status = "disabled"; };