iv/linux
1
0
Fork 0
Code Issues Pull Requests Actions Packages Projects Releases Wiki Activity

[PATCH] sk98lin: error handling on dual port board

Browse Source 
Sk98lin driver error recovery on two port boards is bad.
If it fails the second allocation, it will not release resources
properly. Also it registers the second port in the pci driver data

If second port fails, might as well go with one port.

Signed-off-by: Stephen Hemminger <shemminger@osdl.org>
Signed-off-by: Jeff Garzik <jgarzik@pobox.com>
This commit is contained in:
Stephen Hemminger 2006-01-06 16:57:41 -08:00 committed by Jeff Garzik
parent bce7c95e4d
commit decf67aa2f
1 changed files with 21 additions and 15 deletions
Show Stats Download Patch File Download Diff File Expand all files Collapse all files

36
drivers/net/sk98lin/skge.c
View File

@ -4899,15 +4899,17 @@ static int __devinit skge_probe_one(struct pci_dev *pdev,
boards_found++;
pci_set_drvdata(pdev, dev);
/* More then one port found */
if ((pAC->GIni.GIMacsFound == 2 ) && (pAC->RlmtNets == 2)) {
if ((dev = alloc_etherdev(sizeof(DEV_NET))) == 0) {
printk(KERN_ERR "Unable to allocate etherdev "
dev = alloc_etherdev(sizeof(DEV_NET));
if (!dev) {
printk(KERN_ERR "sk98lin: unable to allocate etherdev "
"structure!\n");
goto out;
goto single_port;
}
pAC->dev[1] = dev;
pNet = netdev_priv(dev);
pNet->PortNr = 1;
pNet->NetNr = 1;
@ -4939,20 +4941,25 @@ static int __devinit skge_probe_one(struct pci_dev *pdev,
if (using_dac)
dev->features |= NETIF_F_HIGHDMA;
if (register_netdev(dev)) {
printk(KERN_ERR "sk98lin: Could not register device for seconf port.\n");
error = register_netdev(dev);
if (error) {
printk(KERN_ERR "sk98lin: Could not register device"
" for second port. (%d)\n", error);
free_netdev(dev);
pAC->dev[1] = pAC->dev[0];
} else {
memcpy(&dev->dev_addr,
&pAC->Addr.Net[1].CurrentMacAddress, 6);
memcpy(dev->perm_addr, dev->dev_addr, dev->addr_len);
printk("%s: %s\n", dev->name, DeviceStr);
printk(" PrefPort:B RlmtMode:Dual Check Link State\n");
goto single_port;
}
pAC->dev[1] = dev;
memcpy(&dev->dev_addr,
&pAC->Addr.Net[1].CurrentMacAddress, 6);
memcpy(dev->perm_addr, dev->dev_addr, dev->addr_len);
printk("%s: %s\n", dev->name, DeviceStr);
printk(" PrefPort:B RlmtMode:Dual Check Link State\n");
}
single_port:
/* Save the hardware revision */
pAC->HWRevision = (((pAC->GIni.GIPciHwRev >> 4) & 0x0F)*10) +
(pAC->GIni.GIPciHwRev & 0x0F);
@ -4964,7 +4971,6 @@ static int __devinit skge_probe_one(struct pci_dev *pdev,
memset(&pAC->PnmiBackup, 0, sizeof(SK_PNMI_STRUCT_DATA));
memcpy(&pAC->PnmiBackup, &pAC->PnmiStruct, sizeof(SK_PNMI_STRUCT_DATA));
pci_set_drvdata(pdev, dev);
return 0;
out_free_resources: