iio: temperature: add driver support for ti tmp117
TMP117 is a Digital temperature sensor with integrated Non-Volatile memory. Add support for tmp117 driver in iio subsystem. Datasheet: https://www.ti.com/lit/gpn/tmp117 Signed-off-by: Puranjay Mohan <puranjay12@gmail.com> Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com> Reviewed-by: Lars-Peter Clausen <lars@metafoo.de> Link: https://lore.kernel.org/r/20210407182147.77221-3-puranjay12@gmail.com Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
This commit is contained in:
Puranjay Mohan
Jonathan Cameron
parent
5e713b25d1
commit
df041e737a
@ -18094,6 +18094,13 @@ F: Documentation/devicetree/bindings/hwmon/ti,tps23861.yaml
|
||||
F: Documentation/hwmon/tps23861.rst
|
||||
F: drivers/hwmon/tps23861.c
|
||||
|
||||
TEXAS INSTRUMENTS' TMP117 TEMPERATURE SENSOR DRIVER
|
||||
M: Puranjay Mohan <puranjay12@gmail.com>
|
||||
L: linux-iio@vger.kernel.org
|
||||
S: Supported
|
||||
F: Documentation/devicetree/bindings/iio/temperature/ti,tmp117.yaml
|
||||
F: drivers/iio/temperature/tmp117.c
|
||||
|
||||
THANKO'S RAREMONO AM/FM/SW RADIO RECEIVER USB DRIVER
|
||||
M: Hans Verkuil <hverkuil@xs4all.nl>
|
||||
L: linux-media@vger.kernel.org
|
||||
|
||||
@ -96,6 +96,16 @@ config TMP007
|
||||
This driver can also be built as a module. If so, the module will
|
||||
be called tmp007.
|
||||
|
||||
config TMP117
|
||||
tristate "TMP117 Digital temperature sensor with integrated NV memory"
|
||||
depends on I2C
|
||||
help
|
||||
If you say yes here you get support for the Texas Instruments
|
||||
TMP117 Digital temperature sensor with integrated NV memory.
|
||||
|
||||
This driver can also be built as a module. If so, the module will
|
||||
be called tmp117.
|
||||
|
||||
config TSYS01
|
||||
tristate "Measurement Specialties TSYS01 temperature sensor using I2C bus connection"
|
||||
depends on I2C
|
||||
|
||||
@ -12,5 +12,6 @@ obj-$(CONFIG_MLX90614) += mlx90614.o
|
||||
obj-$(CONFIG_MLX90632) += mlx90632.o
|
||||
obj-$(CONFIG_TMP006) += tmp006.o
|
||||
obj-$(CONFIG_TMP007) += tmp007.o
|
||||
obj-$(CONFIG_TMP117) += tmp117.o
|
||||
obj-$(CONFIG_TSYS01) += tsys01.o
|
||||
obj-$(CONFIG_TSYS02D) += tsys02d.o
|
||||
|
||||
185
drivers/iio/temperature/tmp117.c
Normal file
185
drivers/iio/temperature/tmp117.c
Normal file
@ -0,0 +1,185 @@
|
||||
// SPDX-License-Identifier: GPL-2.0-only
|
||||
/*
|
||||
* Digital temperature sensor with integrated Non-volatile memory
|
||||
* Copyright (c) 2021 Puranjay Mohan <puranjay12@gmail.com>
|
||||
*
|
||||
* Driver for the Texas Instruments TMP117 Temperature Sensor
|
||||
* (7-bit I2C slave address (0x48 - 0x4B), changeable via ADD pins)
|
||||
*
|
||||
* Note: This driver assumes that the sensor has been calibrated beforehand.
|
||||
*/
|
||||
|
||||
#include <linux/err.h>
|
||||
#include <linux/i2c.h>
|
||||
#include <linux/module.h>
|
||||
#include <linux/bitops.h>
|
||||
#include <linux/types.h>
|
||||
#include <linux/kernel.h>
|
||||
#include <linux/limits.h>
|
||||
|
||||
#include <linux/iio/iio.h>
|
||||
|
||||
#define TMP117_REG_TEMP 0x0
|
||||
#define TMP117_REG_CFGR 0x1
|
||||
#define TMP117_REG_HIGH_LIM 0x2
|
||||
#define TMP117_REG_LOW_LIM 0x3
|
||||
#define TMP117_REG_EEPROM_UL 0x4
|
||||
#define TMP117_REG_EEPROM1 0x5
|
||||
#define TMP117_REG_EEPROM2 0x6
|
||||
#define TMP117_REG_TEMP_OFFSET 0x7
|
||||
#define TMP117_REG_EEPROM3 0x8
|
||||
#define TMP117_REG_DEVICE_ID 0xF
|
||||
|
||||
#define TMP117_RESOLUTION_10UC 78125
|
||||
#define TMP117_DEVICE_ID 0x0117
|
||||
#define MICRODEGREE_PER_10MILLIDEGREE 10000
|
||||
|
||||
struct tmp117_data {
|
||||
struct i2c_client *client;
|
||||
s16 calibbias;
|
||||
};
|
||||
|
||||
static int tmp117_read_raw(struct iio_dev *indio_dev,
|
||||
struct iio_chan_spec const *channel, int *val,
|
||||
int *val2, long mask)
|
||||
{
|
||||
struct tmp117_data *data = iio_priv(indio_dev);
|
||||
s32 ret;
|
||||
|
||||
switch (mask) {
|
||||
case IIO_CHAN_INFO_RAW:
|
||||
ret = i2c_smbus_read_word_swapped(data->client,
|
||||
TMP117_REG_TEMP);
|
||||
if (ret < 0)
|
||||
return ret;
|
||||
*val = sign_extend32(ret, 15);
|
||||
return IIO_VAL_INT;
|
||||
|
||||
case IIO_CHAN_INFO_CALIBBIAS:
|
||||
ret = i2c_smbus_read_word_swapped(data->client,
|
||||
TMP117_REG_TEMP_OFFSET);
|
||||
if (ret < 0)
|
||||
return ret;
|
||||
*val = sign_extend32(ret, 15);
|
||||
return IIO_VAL_INT;
|
||||
|
||||
case IIO_CHAN_INFO_SCALE:
|
||||
/*
|
||||
* Conversion from 10s of uC to mC
|
||||
* as IIO reports temperature in mC
|
||||
*/
|
||||
*val = TMP117_RESOLUTION_10UC / MICRODEGREE_PER_10MILLIDEGREE;
|
||||
*val2 = (TMP117_RESOLUTION_10UC %
|
||||
MICRODEGREE_PER_10MILLIDEGREE) * 100;
|
||||
|
||||
return IIO_VAL_INT_PLUS_MICRO;
|
||||
|
||||
default:
|
||||
return -EINVAL;
|
||||
}
|
||||
}
|
||||
|
||||
static int tmp117_write_raw(struct iio_dev *indio_dev,
|
||||
struct iio_chan_spec const *channel, int val,
|
||||
int val2, long mask)
|
||||
{
|
||||
struct tmp117_data *data = iio_priv(indio_dev);
|
||||
s16 off;
|
||||
|
||||
switch (mask) {
|
||||
case IIO_CHAN_INFO_CALIBBIAS:
|
||||
off = clamp_t(int, val, S16_MIN, S16_MAX);
|
||||
if (off == data->calibbias)
|
||||
return 0;
|
||||
data->calibbias = off;
|
||||
return i2c_smbus_write_word_swapped(data->client,
|
||||
TMP117_REG_TEMP_OFFSET, off);
|
||||
|
||||
default:
|
||||
return -EINVAL;
|
||||
}
|
||||
}
|
||||
|
||||
static const struct iio_chan_spec tmp117_channels[] = {
|
||||
{
|
||||
.type = IIO_TEMP,
|
||||
.info_mask_separate = BIT(IIO_CHAN_INFO_RAW) |
|
||||
BIT(IIO_CHAN_INFO_CALIBBIAS) | BIT(IIO_CHAN_INFO_SCALE),
|
||||
},
|
||||
};
|
||||
|
||||
static const struct iio_info tmp117_info = {
|
||||
.read_raw = tmp117_read_raw,
|
||||
.write_raw = tmp117_write_raw,
|
||||
};
|
||||
|
||||
static int tmp117_identify(struct i2c_client *client)
|
||||
{
|
||||
int dev_id;
|
||||
|
||||
dev_id = i2c_smbus_read_word_swapped(client, TMP117_REG_DEVICE_ID);
|
||||
if (dev_id < 0)
|
||||
return dev_id;
|
||||
if (dev_id != TMP117_DEVICE_ID) {
|
||||
dev_err(&client->dev, "TMP117 not found\n");
|
||||
return -ENODEV;
|
||||
}
|
||||
return 0;
|
||||
}
|
||||
|
||||
static int tmp117_probe(struct i2c_client *client)
|
||||
{
|
||||
struct tmp117_data *data;
|
||||
struct iio_dev *indio_dev;
|
||||
int ret;
|
||||
|
||||
if (!i2c_check_functionality(client->adapter, I2C_FUNC_SMBUS_WORD_DATA))
|
||||
return -EOPNOTSUPP;
|
||||
|
||||
ret = tmp117_identify(client);
|
||||
if (ret < 0)
|
||||
return ret;
|
||||
|
||||
indio_dev = devm_iio_device_alloc(&client->dev, sizeof(*data));
|
||||
if (!indio_dev)
|
||||
return -ENOMEM;
|
||||
|
||||
data = iio_priv(indio_dev);
|
||||
data->client = client;
|
||||
data->calibbias = 0;
|
||||
|
||||
indio_dev->name = "tmp117";
|
||||
indio_dev->modes = INDIO_DIRECT_MODE;
|
||||
indio_dev->info = &tmp117_info;
|
||||
|
||||
indio_dev->channels = tmp117_channels;
|
||||
indio_dev->num_channels = ARRAY_SIZE(tmp117_channels);
|
||||
|
||||
return devm_iio_device_register(&client->dev, indio_dev);
|
||||
}
|
||||
|
||||
static const struct of_device_id tmp117_of_match[] = {
|
||||
{ .compatible = "ti,tmp117", },
|
||||
{ }
|
||||
};
|
||||
MODULE_DEVICE_TABLE(of, tmp117_of_match);
|
||||
|
||||
static const struct i2c_device_id tmp117_id[] = {
|
||||
{ "tmp117", 0 },
|
||||
{ }
|
||||
};
|
||||
MODULE_DEVICE_TABLE(i2c, tmp117_id);
|
||||
|
||||
static struct i2c_driver tmp117_driver = {
|
||||
.driver = {
|
||||
.name = "tmp117",
|
||||
.of_match_table = tmp117_of_match,
|
||||
},
|
||||
.probe_new = tmp117_probe,
|
||||
.id_table = tmp117_id,
|
||||
};
|
||||
module_i2c_driver(tmp117_driver);
|
||||
|
||||
MODULE_AUTHOR("Puranjay Mohan <puranjay12@gmail.com>");
|
||||
MODULE_DESCRIPTION("TI TMP117 Temperature sensor driver");
|
||||
MODULE_LICENSE("GPL");
|
||||
Loading…
Reference in New Issue
Block a user