iv/linux
1
0
Fork 0
Code Issues Pull Requests Actions Packages Projects Releases Wiki Activity

[TG3]: Add recovery logic when MMIOs are re-ordered

Browse Source 
Add recovery logic when we suspect that the system is re-ordering
MMIOs. Re-ordered MMIOs to the send mailbox can cause bogus tx
completions and hit BUG_ON() in the tx completion path.

tg3 already has logic to handle re-ordered MMIOs by flushing the MMIOs
that must be strictly ordered (such as the send mailbox).  Determining
when to enable the flush is currently a manual process of adding known
chipsets to a list.

The new code replaces the BUG_ON() in the tx completion path with the
call to tg3_tx_recover(). It will set the TG3_FLAG_MBOX_WRITE_REORDER
flag and reset the chip later in the workqueue to recover and start
flushing MMIOs to the mailbox.

A message to report the problem will be printed. We will then decide
whether or not to add the host bridge to the list of chipsets that do
re-ordering.

We may add some additional code later to print the host bridge's ID so
that the user can report it more easily.

The assumption that re-ordering can only happen on x86 systems is also
removed.

Signed-off-by: Michael Chan <mchan@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
This commit is contained in:
Michael Chan 2006-05-26 17:48:07 -07:00 committed by David S. Miller
parent 30b6c28d2a
commit df3e654818
2 changed files with 49 additions and 9 deletions
Show Stats Download Patch File Download Diff File Expand all files Collapse all files

53
drivers/net/tg3.c
View File

@ -2967,6 +2967,29 @@ static int tg3_setup_phy(struct tg3 *tp, int force_reset)
return err;
}
/* This is called whenever we suspect that the system chipset is re-
* ordering the sequence of MMIO to the tx send mailbox. The symptom
* is bogus tx completions. We try to recover by setting the
* TG3_FLAG_MBOX_WRITE_REORDER flag and resetting the chip later
* in the workqueue.
*/
static void tg3_tx_recover(struct tg3 *tp)
{
BUG_ON((tp->tg3_flags & TG3_FLAG_MBOX_WRITE_REORDER) ||
tp->write32_tx_mbox == tg3_write_indirect_mbox);
printk(KERN_WARNING PFX "%s: The system may be re-ordering memory-"
"mapped I/O cycles to the network device, attempting to "
"recover. Please report the problem to the driver maintainer "
"and include system chipset information.\n", tp->dev->name);
spin_lock(&tp->lock);
spin_lock(&tp->tx_lock);
tp->tg3_flags |= TG3_FLAG_TX_RECOVERY_PENDING;
spin_unlock(&tp->tx_lock);
spin_unlock(&tp->lock);
}
/* Tigon3 never reports partial packet sends. So we do not
* need special logic to handle SKBs that have not had all
* of their frags sent yet, like SunGEM does.
@ -2979,9 +3002,13 @@ static void tg3_tx(struct tg3 *tp)
while (sw_idx != hw_idx) {
struct tx_ring_info *ri = &tp->tx_buffers[sw_idx];
struct sk_buff *skb = ri->skb;
int i;
int i, tx_bug = 0;
if (unlikely(skb == NULL)) {
tg3_tx_recover(tp);
return;
}
BUG_ON(skb == NULL);
pci_unmap_single(tp->pdev,
pci_unmap_addr(ri, mapping),
skb_headlen(skb),
@ -2992,10 +3019,9 @@ static void tg3_tx(struct tg3 *tp)
sw_idx = NEXT_TX(sw_idx);
for (i = 0; i < skb_shinfo(skb)->nr_frags; i++) {
BUG_ON(sw_idx == hw_idx);
ri = &tp->tx_buffers[sw_idx];
BUG_ON(ri->skb != NULL);
if (unlikely(ri->skb != NULL || sw_idx == hw_idx))
tx_bug = 1;
pci_unmap_page(tp->pdev,
pci_unmap_addr(ri, mapping),
@ -3006,6 +3032,11 @@ static void tg3_tx(struct tg3 *tp)
}
dev_kfree_skb(skb);
if (unlikely(tx_bug)) {
tg3_tx_recover(tp);
return;
}
}
tp->tx_cons = sw_idx;
@ -3333,6 +3364,11 @@ static int tg3_poll(struct net_device *netdev, int *budget)
/* run TX completion thread */
if (sblk->idx[0].tx_consumer != tp->tx_cons) {
tg3_tx(tp);
if (unlikely(tp->tg3_flags & TG3_FLAG_TX_RECOVERY_PENDING)) {
netif_rx_complete(netdev);
schedule_work(&tp->reset_task);
return 0;
}
}
/* run RX thread, within the bounds set by NAPI.
@ -3581,6 +3617,13 @@ static void tg3_reset_task(void *_data)
restart_timer = tp->tg3_flags2 & TG3_FLG2_RESTART_TIMER;
tp->tg3_flags2 &= ~TG3_FLG2_RESTART_TIMER;
if (tp->tg3_flags & TG3_FLAG_TX_RECOVERY_PENDING) {
tp->write32_tx_mbox = tg3_write32_tx_mbox;
tp->write32_rx_mbox = tg3_write_flush_reg32;
tp->tg3_flags |= TG3_FLAG_MBOX_WRITE_REORDER;
tp->tg3_flags &= ~TG3_FLAG_TX_RECOVERY_PENDING;
}
tg3_halt(tp, RESET_KIND_SHUTDOWN, 0);
tg3_init_hw(tp, 1);

5
drivers/net/tg3.h
View File

@ -2155,11 +2155,7 @@ struct tg3 {
#define TG3_FLAG_ENABLE_ASF 0x00000020
#define TG3_FLAG_5701_REG_WRITE_BUG 0x00000040
#define TG3_FLAG_POLL_SERDES 0x00000080
#if defined(CONFIG_X86)
#define TG3_FLAG_MBOX_WRITE_REORDER 0x00000100
#else
#define TG3_FLAG_MBOX_WRITE_REORDER 0 /* disables code too */
#endif
#define TG3_FLAG_PCIX_TARGET_HWBUG 0x00000200
#define TG3_FLAG_WOL_SPEED_100MB 0x00000400
#define TG3_FLAG_WOL_ENABLE 0x00000800
@ -2172,6 +2168,7 @@ struct tg3 {
#define TG3_FLAG_PCI_HIGH_SPEED 0x00040000
#define TG3_FLAG_PCI_32BIT 0x00080000
#define TG3_FLAG_SRAM_USE_CONFIG 0x00100000
#define TG3_FLAG_TX_RECOVERY_PENDING 0x00200000
#define TG3_FLAG_SERDES_WOL_CAP 0x00400000
#define TG3_FLAG_JUMBO_RING_ENABLE 0x00800000
#define TG3_FLAG_10_100_ONLY 0x01000000