From e1ee843488d58099a89979627ef85d5bd6c5cacd Mon Sep 17 00:00:00 2001 From: Wesley Cheng Date: Wed, 17 Aug 2022 11:23:52 -0700 Subject: [PATCH] usb: dwc3: gadget: Force sending delayed status during soft disconnect If any function drivers request for a delayed status phase, this leads to a SETUP transfer timeout error, since the function may take longer to process the DATA stage. This eventually results in end transfer timeouts, as there is a pending SETUP transaction. In addition, allow the DWC3_EP_DELAY_STOP to be set for if there is a delayed status requested. Ocasionally, a host may abort the current SETUP transaction, by issuing a subsequent SETUP token. In those situations, it would result in an endxfer timeout as well. Reviewed-by: Thinh Nguyen Signed-off-by: Wesley Cheng Link: https://lore.kernel.org/r/20220817182359.13550-3-quic_wcheng@quicinc.com Signed-off-by: Greg Kroah-Hartman --- drivers/usb/dwc3/gadget.c | 5 ++++- 1 file changed, 4 insertions(+), 1 deletion(-) diff --git a/drivers/usb/dwc3/gadget.c b/drivers/usb/dwc3/gadget.c index 406bd4d1a1b6..004b8c4746a7 100644 --- a/drivers/usb/dwc3/gadget.c +++ b/drivers/usb/dwc3/gadget.c @@ -2501,6 +2501,9 @@ static int dwc3_gadget_soft_disconnect(struct dwc3 *dwc) if (dwc->ep0state != EP0_SETUP_PHASE) { int ret; + if (dwc->delayed_status) + dwc3_ep0_send_delayed_status(dwc); + reinit_completion(&dwc->ep0_in_setup); spin_unlock_irqrestore(&dwc->lock, flags); @@ -3693,7 +3696,7 @@ void dwc3_stop_active_transfer(struct dwc3_ep *dep, bool force, * timeout. Delay issuing the End Transfer command until the Setup TRB is * prepared. */ - if (dwc->ep0state != EP0_SETUP_PHASE && !dwc->delayed_status) { + if (dwc->ep0state != EP0_SETUP_PHASE) { dep->flags |= DWC3_EP_DELAY_STOP; return; }