iv/linux
1
0
Fork 0
Code Issues Pull Requests Actions Packages Projects Releases Wiki Activity

drm/panfrost: Enable devfreq to work without regulator

Browse Source 
If there is no regulator defined for the GPU then still control the
frequency using the supplied clock.

Some boards have clock control but no (direct) control of the regulator.
For example the HiKey960 uses a mailbox protocol to a MCU to control
frequencies and doesn't directly control the voltage. This patch allows
frequency control of the GPU on this system.

Signed-off-by: Steven Price <steven.price@arm.com>
Signed-off-by: Rob Herring <robh@kernel.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20190816093107.30518-1-steven.price@arm.com
This commit is contained in:
Steven Price 2019-08-16 10:31:05 +01:00 committed by Rob Herring
parent 7282f7645d
commit e21dd29088
1 changed files with 2 additions and 5 deletions
Show Stats Download Patch File Download Diff File Expand all files Collapse all files

7
drivers/gpu/drm/panfrost/panfrost_devfreq.c
View File

@ -39,7 +39,7 @@ static int panfrost_devfreq_target(struct device *dev, unsigned long *freq,
* If frequency scaling from low to high, adjust voltage first.
* If frequency scaling from high to low, adjust frequency first.
*/
if (old_clk_rate < target_rate) {
if (old_clk_rate < target_rate && pfdev->regulator) {
err = regulator_set_voltage(pfdev->regulator, target_volt,
target_volt);
if (err) {
@ -58,7 +58,7 @@ static int panfrost_devfreq_target(struct device *dev, unsigned long *freq,
return err;
}
if (old_clk_rate > target_rate) {
if (old_clk_rate > target_rate && pfdev->regulator) {
err = regulator_set_voltage(pfdev->regulator, target_volt,
target_volt);
if (err)
@ -136,9 +136,6 @@ int panfrost_devfreq_init(struct panfrost_device *pfdev)
int ret;
struct dev_pm_opp *opp;
if (!pfdev->regulator)
return 0;
ret = dev_pm_opp_of_add_table(&pfdev->pdev->dev);
if (ret == -ENODEV) /* Optional, continue without devfreq */
return 0;