iv/linux
1
0
Fork 0
Code Issues Pull Requests Actions Packages Projects Releases Wiki Activity

ARM: dts: logicpd-torpedo: Add isp1763 support to baseboard

Browse Source 
The baseboard has an ISP1763 USB controller acting as a host.
Since the pinmuxing for the corresponding IRQ is different
between OMAP35 and DM37, the pinmux has been placed in the
kit-level files, while the common code is placed into the
baseboard file.

Signed-off-by: Adam Ford <aford173@gmail.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
This commit is contained in:
Adam Ford 2022-02-10 07:10:28 -06:00 committed by Tony Lindgren
parent 6e8c8b5082
commit e2d54fb6ce
3 changed files with 57 additions and 1 deletions
Show Stats Download Patch File Download Diff File Expand all files Collapse all files

8
arch/arm/boot/dts/logicpd-torpedo-35xx-devkit.dts
View File

@ -11,3 +11,11 @@
model = "LogicPD Zoom OMAP35xx Torpedo Development Kit";
compatible = "logicpd,dm3730-torpedo-devkit", "ti,omap3430", "ti,omap3";
};
&omap3_pmx_core {
isp1763_pins: pinmux_isp1763_pins {
pinctrl-single,pins = <
OMAP3_CORE1_IOPAD(0x2154, PIN_INPUT_PULLUP | MUX_MODE4) /* sdmmc1_dat6.gpio_128 */
>;
};
};

9
arch/arm/boot/dts/logicpd-torpedo-37xx-devkit.dts
View File

@ -85,3 +85,12 @@
>;
};
};
/* The gpio muxing between omap3530 and dm3730 is different for GPIO_128 */
&omap3_pmx_wkup {
isp1763_pins: pinmux_isp1763_pins {
pinctrl-single,pins = <
OMAP3_WKUP_IOPAD(0x2a58, PIN_INPUT_PULLUP | MUX_MODE4) /* reserved.gpio_128 */
>;
};
};

41
arch/arm/boot/dts/logicpd-torpedo-baseboard.dtsi
View File

@ -93,7 +93,8 @@
&gpmc {
ranges = <0 0 0x30000000 0x1000000 /* CS0: 16MB for NAND */
1 0 0x2c000000 0x1000000>; /* CS1: 16MB for LAN9221 */
1 0 0x2c000000 0x1000000 /* CS1: 16MB for LAN9221 */
6 0 0x28000000 0x1000000>; /* CS6: 16MB for ISP1763 */
ethernet@gpmc {
pinctrl-names = "default";
@ -102,6 +103,44 @@
interrupts = <1 IRQ_TYPE_LEVEL_LOW>; /* gpio129 */
reg = <1 0 0xff>;
};
usb@6,0 {
pinctrl-names = "default";
pinctrl-0 = <&isp1763_pins>;
compatible = "nxp,usb-isp1763";
reg = <0x6 0x0 0xff>;
interrupt-parent = <&gpio5>;
interrupts = <0 IRQ_TYPE_LEVEL_LOW>;
interrupt-names = "host";
bus-width = <16>;
dr_mode = "host";
gpmc,mux-add-data = <0>;
gpmc,device-width = <2>;
gpmc,wait-pin = <0>;
gpmc,burst-length = <4>;
gpmc,cycle2cycle-samecsen = <1>;
gpmc,cycle2cycle-diffcsen = <1>;
gpmc,cs-on-ns = <0>;
gpmc,cs-rd-off-ns = <45>;
gpmc,cs-wr-off-ns = <45>;
gpmc,adv-on-ns = <0>;
gpmc,adv-rd-off-ns = <0>;
gpmc,adv-wr-off-ns = <0>;
gpmc,oe-on-ns = <0>;
gpmc,oe-off-ns = <45>;
gpmc,we-on-ns = <0>;
gpmc,we-off-ns = <25>;
gpmc,rd-cycle-ns = <60>;
gpmc,wr-cycle-ns = <45>;
gpmc,access-ns = <35>;
gpmc,page-burst-access-ns = <0>;
gpmc,bus-turnaround-ns = <0>;
gpmc,cycle2cycle-delay-ns = <60>;
gpmc,wait-monitoring-ns = <0>;
gpmc,clk-activation-ns = <0>;
gpmc,wr-data-mux-bus-ns = <5>;
gpmc,wr-access-ns = <20>;
};
};
&hdqw1w {