mtd: spi-nor: Add Freescale QuadSPI driver
(0) What is the QuadSPI controller? The QuadSPI(Quad Serial Peripheral Interface) acts as an interface to one single or two external serial flash devices, each with up to 4 bidirectional data lines. (1) The QuadSPI controller is driven by the LUT(Look-up Table) registers. The LUT registers are a look-up-table for sequences of instructions. A valid sequence consists of four LUT registers. (2) The definition of the LUT register shows below: --------------------------------------------------- | INSTR1 | PAD1 | OPRND1 | INSTR0 | PAD0 | OPRND0 | --------------------------------------------------- There are several types of INSTRx, such as: CMD : the SPI NOR command. ADDR : the address for the SPI NOR command. DUMMY : the dummy cycles needed by the SPI NOR command. .... There are several types of PADx, such as: PAD1 : use a singe I/O line. PAD2 : use two I/O lines. PAD4 : use quad I/O lines. .... (3) Test this driver with the JFFS2 and UBIFS: For jffs2: ------------- #flash_eraseall /dev/mtd0 #mount -t jffs2 /dev/mtdblock0 tmp #bonnie++ -d tmp -u 0 -s 10 -r 5 For ubifs: ------------- #flash_eraseall /dev/mtd0 #ubiattach /dev/ubi_ctrl -m 0 #ubimkvol /dev/ubi0 -N test -m #mount -t ubifs ubi0:test tmp #bonnie++ -d tmp -u 0 -s 10 -r 5 Signed-off-by: Huang Shijie <b32955@freescale.com> Signed-off-by: Brian Norris <computersforpeace@gmail.com>
This commit is contained in:
parent
c7a8a11c6b
commit
e46ecda764
@ -4,3 +4,9 @@ config MTD_SPI_NOR_BASE
|
||||
help
|
||||
This is the framework for the SPI NOR which can be used by the SPI
|
||||
device drivers and the SPI-NOR device driver.
|
||||
config SPI_FSL_QUADSPI
|
||||
tristate "Freescale Quad SPI controller"
|
||||
depends on ARCH_MXC && MTD_SPI_NOR_BASE
|
||||
help
|
||||
This enables support for the Quad SPI controller in master mode.
|
||||
We only connect the NOR to this controller now.
|
||||
|
@ -1 +1,2 @@
|
||||
obj-$(CONFIG_MTD_SPI_NOR_BASE) += spi-nor.o
|
||||
obj-$(CONFIG_SPI_FSL_QUADSPI) += fsl-quadspi.o
|
||||
|
1009
drivers/mtd/spi-nor/fsl-quadspi.c
Normal file
1009
drivers/mtd/spi-nor/fsl-quadspi.c
Normal file
File diff suppressed because it is too large
Load Diff
Loading…
Reference in New Issue
Block a user