From c353d7ce76bfbb87a89155616916cea1f0f1e78e Mon Sep 17 00:00:00 2001 From: Geert Uytterhoeven Date: Tue, 19 Oct 2021 16:45:00 +0200 Subject: [PATCH 01/26] uapi: Add Add a header file providing translation primitives and tables for the conversion of (ASCII) characters to a 14-segments notation, as used by 14-segment alphanumeric displays. This follows the spirit of include/uapi/linux/map_to_7segment.h. Signed-off-by: Geert Uytterhoeven Signed-off-by: Miguel Ojeda --- include/uapi/linux/map_to_14segment.h | 241 ++++++++++++++++++++++++++ 1 file changed, 241 insertions(+) create mode 100644 include/uapi/linux/map_to_14segment.h diff --git a/include/uapi/linux/map_to_14segment.h b/include/uapi/linux/map_to_14segment.h new file mode 100644 index 000000000000..0346ef76543b --- /dev/null +++ b/include/uapi/linux/map_to_14segment.h @@ -0,0 +1,241 @@ +/* SPDX-License-Identifier: GPL-2.0+ WITH Linux-syscall-note */ +/* + * Copyright (C) 2021 Glider bv + * + * Based on include/uapi/linux/map_to_7segment.h: + + * Copyright (c) 2005 Henk Vergonet + */ + +#ifndef MAP_TO_14SEGMENT_H +#define MAP_TO_14SEGMENT_H + +/* This file provides translation primitives and tables for the conversion + * of (ASCII) characters to a 14-segments notation. + * + * The 14 segment's wikipedia notation below is used as standard. + * See: https://en.wikipedia.org/wiki/Fourteen-segment_display + * + * Notation: +---a---+ + * |\ | /| + * f h i j b + * | \|/ | + * +-g1+-g2+ + * | /|\ | + * e k l m c + * |/ | \| + * +---d---+ + * + * Usage: + * + * Register a map variable, and fill it with a character set: + * static SEG14_DEFAULT_MAP(map_seg14); + * + * + * Then use for conversion: + * seg14 = map_to_seg14(&map_seg14, some_char); + * ... + * + * In device drivers it is recommended, if required, to make the char map + * accessible via the sysfs interface using the following scheme: + * + * static ssize_t map_seg14_show(struct device *dev, + * struct device_attribute *attr, char *buf) + * { + * memcpy(buf, &map_seg14, sizeof(map_seg14)); + * return sizeof(map_seg14); + * } + * static ssize_t map_seg14_store(struct device *dev, + * struct device_attribute *attr, + * const char *buf, size_t cnt) + * { + * if (cnt != sizeof(map_seg14)) + * return -EINVAL; + * memcpy(&map_seg14, buf, cnt); + * return cnt; + * } + * static DEVICE_ATTR_RW(map_seg14); + */ +#include +#include + +#include + +#define BIT_SEG14_A 0 +#define BIT_SEG14_B 1 +#define BIT_SEG14_C 2 +#define BIT_SEG14_D 3 +#define BIT_SEG14_E 4 +#define BIT_SEG14_F 5 +#define BIT_SEG14_G1 6 +#define BIT_SEG14_G2 7 +#define BIT_SEG14_H 8 +#define BIT_SEG14_I 9 +#define BIT_SEG14_J 10 +#define BIT_SEG14_K 11 +#define BIT_SEG14_L 12 +#define BIT_SEG14_M 13 +#define BIT_SEG14_RESERVED1 14 +#define BIT_SEG14_RESERVED2 15 + +struct seg14_conversion_map { + __be16 table[128]; +}; + +static __inline__ int map_to_seg14(struct seg14_conversion_map *map, int c) +{ + if (c < 0 || c >= sizeof(map->table) / sizeof(map->table[0])) + return -EINVAL; + + return __be16_to_cpu(map->table[c]); +} + +#define SEG14_CONVERSION_MAP(_name, _map) \ + struct seg14_conversion_map _name = { .table = { _map } } + +/* + * It is recommended to use a facility that allows user space to redefine + * custom character sets for LCD devices. Please use a sysfs interface + * as described above. + */ +#define MAP_TO_SEG14_SYSFS_FILE "map_seg14" + +/******************************************************************************* + * ASCII conversion table + ******************************************************************************/ + +#define _SEG14(sym, a, b, c, d, e, f, g1, g2, h, j, k, l, m, n) \ + __cpu_to_be16( a << BIT_SEG14_A | b << BIT_SEG14_B | \ + c << BIT_SEG14_C | d << BIT_SEG14_D | \ + e << BIT_SEG14_E | f << BIT_SEG14_F | \ + g1 << BIT_SEG14_G1 | g2 << BIT_SEG14_G2 | \ + h << BIT_SEG14_H | j << BIT_SEG14_I | \ + k << BIT_SEG14_J | l << BIT_SEG14_K | \ + m << BIT_SEG14_L | n << BIT_SEG14_M ) + +#define _MAP_0_32_ASCII_SEG14_NON_PRINTABLE \ + 0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0, + +#define _MAP_33_47_ASCII_SEG14_SYMBOL \ + _SEG14('!', 0, 1, 1, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0), \ + _SEG14('"', 0, 1, 0, 0, 0, 0, 0, 0, 0, 1, 0, 0, 0, 0), \ + _SEG14('#', 0, 1, 1, 1, 0, 0, 1, 1, 0, 1, 0, 0, 1, 0), \ + _SEG14('$', 1, 0, 1, 1, 0, 1, 1, 1, 0, 1, 0, 0, 1, 0), \ + _SEG14('%', 0, 0, 1, 0, 0, 1, 0, 0, 0, 0, 1, 1, 0, 0), \ + _SEG14('&', 1, 0, 0, 1, 1, 0, 1, 0, 1, 0, 1, 0, 0, 1), \ + _SEG14('\'',0, 0, 0, 0, 0, 0, 0, 0, 0, 1, 0, 0, 0, 0), \ + _SEG14('(', 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 1, 0, 0, 1), \ + _SEG14(')', 0, 0, 0, 0, 0, 0, 0, 0, 1, 0, 0, 1, 0, 0), \ + _SEG14('*', 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 1, 1, 1), \ + _SEG14('+', 0, 0, 0, 0, 0, 0, 1, 1, 0, 1, 0, 0, 1, 0), \ + _SEG14(',', 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 1, 0, 0), \ + _SEG14('-', 0, 0, 0, 0, 0, 0, 1, 1, 0, 0, 0, 0, 0, 0), \ + _SEG14('.', 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 1), \ + _SEG14('/', 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 0, 0), + +#define _MAP_48_57_ASCII_SEG14_NUMERIC \ + _SEG14('0', 1, 1, 1, 1, 1, 1, 0, 0, 0, 0, 1, 1, 0, 0), \ + _SEG14('1', 0, 1, 1, 0, 0, 0, 0, 0, 0, 0, 1, 0, 0, 0), \ + _SEG14('2', 1, 1, 0, 1, 1, 0, 1, 1, 0, 0, 0, 0, 0, 0), \ + _SEG14('3', 1, 1, 1, 1, 0, 0, 0, 1, 0, 0, 0, 0, 0, 0), \ + _SEG14('4', 0, 1, 1, 0, 0, 1, 1, 1, 0, 0, 0, 0, 0, 0), \ + _SEG14('5', 1, 0, 0, 1, 0, 1, 1, 0, 0, 0, 0, 0, 0, 1), \ + _SEG14('6', 1, 0, 1, 1, 1, 1, 1, 1, 0, 0, 0, 0, 0, 0), \ + _SEG14('7', 1, 0, 0, 0, 0, 0, 0, 0, 0, 0, 1, 0, 1, 0), \ + _SEG14('8', 1, 1, 1, 1, 1, 1, 1, 1, 0, 0, 0, 0, 0, 0), \ + _SEG14('9', 1, 1, 1, 1, 0, 1, 1, 1, 0, 0, 0, 0, 0, 0), + +#define _MAP_58_64_ASCII_SEG14_SYMBOL \ + _SEG14(':', 0, 0, 0, 0, 0, 0, 0, 0, 0, 1, 0, 0, 1, 0), \ + _SEG14(';', 0, 0, 0, 0, 0, 0, 0, 0, 0, 1, 0, 1, 0, 0), \ + _SEG14('<', 0, 0, 0, 0, 0, 0, 1, 0, 0, 0, 1, 0, 0, 1), \ + _SEG14('=', 0, 0, 0, 1, 0, 0, 1, 1, 0, 0, 0, 0, 0, 0), \ + _SEG14('>', 0, 0, 0, 0, 0, 0, 0, 1, 1, 0, 0, 1, 0, 0), \ + _SEG14('?', 1, 0, 0, 0, 0, 1, 0, 0, 0, 0, 1, 0, 1, 0), \ + _SEG14('@', 1, 1, 0, 1, 1, 1, 0, 1, 0, 1, 0, 0, 0, 0), + +#define _MAP_65_90_ASCII_SEG14_ALPHA_UPPER \ + _SEG14('A', 1, 1, 1, 0, 1, 1, 1, 1, 0, 0, 0, 0, 0, 0), \ + _SEG14('B', 1, 1, 1, 1, 0, 0, 0, 1, 0, 1, 0, 0, 1, 0), \ + _SEG14('C', 1, 0, 0, 1, 1, 1, 0, 0, 0, 0, 0, 0, 0, 0), \ + _SEG14('D', 1, 1, 1, 1, 0, 0, 0, 0, 0, 1, 0, 0, 1, 0), \ + _SEG14('E', 1, 0, 0, 1, 1, 1, 1, 0, 0, 0, 0, 0, 0, 0), \ + _SEG14('F', 1, 0, 0, 0, 1, 1, 1, 0, 0, 0, 0, 0, 0, 0), \ + _SEG14('G', 1, 0, 1, 1, 1, 1, 0, 1, 0, 0, 0, 0, 0, 0), \ + _SEG14('H', 0, 1, 1, 0, 1, 1, 1, 1, 0, 0, 0, 0, 0, 0), \ + _SEG14('I', 1, 0, 0, 1, 0, 0, 0, 0, 0, 1, 0, 0, 1, 0), \ + _SEG14('J', 0, 1, 1, 1, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0), \ + _SEG14('K', 0, 0, 0, 0, 1, 1, 1, 0, 0, 0, 1, 0, 0, 1), \ + _SEG14('L', 0, 0, 0, 1, 1, 1, 0, 0, 0, 0, 0, 0, 0, 0), \ + _SEG14('M', 0, 1, 1, 0, 1, 1, 0, 0, 1, 0, 1, 0, 0, 0), \ + _SEG14('N', 0, 1, 1, 0, 1, 1, 0, 0, 1, 0, 0, 0, 0, 1), \ + _SEG14('O', 1, 1, 1, 1, 1, 1, 0, 0, 0, 0, 0, 0, 0, 0), \ + _SEG14('P', 1, 1, 0, 0, 1, 1, 1, 1, 0, 0, 0, 0, 0, 0), \ + _SEG14('Q', 1, 1, 1, 1, 1, 1, 0, 0, 0, 0, 0, 0, 0, 1), \ + _SEG14('R', 1, 1, 0, 0, 1, 1, 1, 1, 0, 0, 0, 0, 0, 1), \ + _SEG14('S', 1, 0, 1, 1, 0, 1, 1, 1, 0, 0, 0, 0, 0, 0), \ + _SEG14('T', 1, 0, 0, 0, 0, 0, 0, 0, 0, 1, 0, 0, 1, 0), \ + _SEG14('U', 0, 1, 1, 1, 1, 1, 0, 0, 0, 0, 0, 0, 0, 0), \ + _SEG14('V', 0, 0, 0, 0, 1, 1, 0, 0, 0, 0, 1, 1, 0, 0), \ + _SEG14('W', 0, 1, 1, 0, 1, 1, 0, 0, 0, 0, 0, 1, 0, 1), \ + _SEG14('X', 0, 0, 0, 0, 0, 0, 0, 0, 1, 0, 1, 1, 0, 1), \ + _SEG14('Y', 0, 0, 0, 0, 0, 0, 0, 0, 1, 0, 1, 0, 1, 0), \ + _SEG14('Z', 1, 0, 0, 1, 0, 0, 0, 0, 0, 0, 1, 1, 0, 0), + +#define _MAP_91_96_ASCII_SEG14_SYMBOL \ + _SEG14('[', 1, 0, 0, 1, 1, 1, 0, 0, 0, 0, 0, 0, 0, 0), \ + _SEG14('\\',0, 0, 0, 0, 0, 0, 0, 0, 1, 0, 0, 0, 0, 1), \ + _SEG14(']', 1, 1, 1, 1, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0), \ + _SEG14('^', 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 1, 0, 1), \ + _SEG14('_', 0, 0, 0, 1, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0), \ + _SEG14('`', 0, 0, 0, 0, 0, 0, 0, 0, 1, 0, 0, 0, 0, 0), + +#define _MAP_97_122_ASCII_SEG14_ALPHA_LOWER \ + _SEG14('a', 0, 0, 0, 1, 1, 0, 1, 0, 0, 0, 0, 0, 1, 0), \ + _SEG14('b', 0, 0, 0, 1, 1, 1, 1, 0, 0, 0, 0, 0, 0, 1), \ + _SEG14('c', 0, 0, 0, 1, 1, 0, 1, 1, 0, 0, 0, 0, 0, 0), \ + _SEG14('d', 0, 1, 1, 1, 0, 0, 0, 1, 0, 0, 0, 1, 0, 0), \ + _SEG14('e', 0, 0, 0, 1, 1, 0, 1, 0, 0, 0, 0, 1, 0, 0), \ + _SEG14('f', 0, 0, 0, 0, 0, 0, 1, 1, 0, 0, 1, 0, 1, 0), \ + _SEG14('g', 0, 1, 1, 1, 0, 0, 0, 1, 0, 0, 1, 0, 0, 0), \ + _SEG14('h', 0, 0, 0, 0, 1, 1, 1, 0, 0, 0, 0, 0, 1, 0), \ + _SEG14('i', 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 1, 0), \ + _SEG14('j', 0, 0, 0, 0, 1, 0, 0, 0, 0, 1, 0, 1, 0, 0), \ + _SEG14('k', 0, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 0, 1, 1), \ + _SEG14('l', 0, 0, 0, 0, 1, 1, 0, 0, 0, 0, 0, 0, 0, 0), \ + _SEG14('m', 0, 0, 1, 0, 1, 0, 1, 1, 0, 0, 0, 0, 1, 0), \ + _SEG14('n', 0, 0, 0, 0, 1, 0, 1, 0, 0, 0, 0, 0, 1, 0), \ + _SEG14('o', 0, 0, 1, 1, 1, 0, 1, 1, 0, 0, 0, 0, 0, 0), \ + _SEG14('p', 0, 0, 0, 0, 1, 1, 1, 0, 1, 0, 0, 0, 0, 0), \ + _SEG14('q', 0, 1, 1, 0, 0, 0, 0, 1, 0, 0, 1, 0, 0, 0), \ + _SEG14('r', 0, 0, 0, 0, 1, 0, 1, 0, 0, 0, 0, 0, 0, 0), \ + _SEG14('s', 0, 0, 0, 1, 0, 0, 0, 1, 0, 0, 0, 0, 0, 1), \ + _SEG14('t', 0, 0, 0, 1, 1, 1, 1, 0, 0, 0, 0, 0, 0, 0), \ + _SEG14('u', 0, 0, 1, 1, 1, 0, 0, 0, 0, 0, 0, 0, 0, 0), \ + _SEG14('v', 0, 0, 0, 0, 1, 0, 0, 0, 0, 0, 0, 1, 0, 0), \ + _SEG14('w', 0, 0, 1, 0, 1, 0, 0, 0, 0, 0, 0, 1, 0, 1), \ + _SEG14('x', 0, 0, 0, 0, 0, 0, 1, 1, 0, 0, 0, 1, 0, 1), \ + _SEG14('y', 0, 1, 1, 1, 0, 0, 0, 1, 0, 1, 0, 0, 0, 0), \ + _SEG14('z', 0, 0, 0, 1, 0, 0, 1, 0, 0, 0, 0, 1, 0, 0), + +#define _MAP_123_126_ASCII_SEG14_SYMBOL \ + _SEG14('{', 1, 0, 0, 1, 0, 0, 1, 0, 1, 0, 0, 1, 0, 0), \ + _SEG14('|', 0, 0, 0, 0, 0, 0, 0, 0, 0, 1, 0, 0, 1, 0), \ + _SEG14('}', 1, 0, 0, 1, 0, 0, 0, 1, 0, 0, 1, 0, 0, 1), \ + _SEG14('~', 0, 0, 0, 0, 0, 0, 1, 1, 0, 0, 1, 1, 0, 0), + +/* Maps */ +#define MAP_ASCII14SEG_ALPHANUM \ + _MAP_0_32_ASCII_SEG14_NON_PRINTABLE \ + _MAP_33_47_ASCII_SEG14_SYMBOL \ + _MAP_48_57_ASCII_SEG14_NUMERIC \ + _MAP_58_64_ASCII_SEG14_SYMBOL \ + _MAP_65_90_ASCII_SEG14_ALPHA_UPPER \ + _MAP_91_96_ASCII_SEG14_SYMBOL \ + _MAP_97_122_ASCII_SEG14_ALPHA_LOWER \ + _MAP_123_126_ASCII_SEG14_SYMBOL + +#define SEG14_DEFAULT_MAP(_name) \ + SEG14_CONVERSION_MAP(_name, MAP_ASCII14SEG_ALPHANUM) + +#endif /* MAP_TO_14SEGMENT_H */ From ae53c6963f5a3dc89dd04fa1372910e442fabc14 Mon Sep 17 00:00:00 2001 From: Geert Uytterhoeven Date: Tue, 19 Oct 2021 16:45:01 +0200 Subject: [PATCH 02/26] dt-bindings: auxdisplay: ht16k33: Document Adafruit segment displays The Holtek HT16K33 LED controller is not only used for driving dot-matrix displays, but also for driving segment displays. Document compatible values for the Adafruit 7-segment[1] and 14-segment[2] FeatherWing expansion boards with red displays. According to the schematics, all other Adafruit 7-segment and 14-segment display backpack and FeatherWing expansion boards (including bare boards and boards fitted with displays) are compatible with these two boards. [1] https://www.adafruit.com/product/3108 [2] https://www.adafruit.com/product/3130 Signed-off-by: Geert Uytterhoeven Reviewed-by: Rob Herring Signed-off-by: Miguel Ojeda --- .../bindings/auxdisplay/holtek,ht16k33.yaml | 20 ++++++++++++++++--- 1 file changed, 17 insertions(+), 3 deletions(-) diff --git a/Documentation/devicetree/bindings/auxdisplay/holtek,ht16k33.yaml b/Documentation/devicetree/bindings/auxdisplay/holtek,ht16k33.yaml index 64ffff460026..6baf1200c9d8 100644 --- a/Documentation/devicetree/bindings/auxdisplay/holtek,ht16k33.yaml +++ b/Documentation/devicetree/bindings/auxdisplay/holtek,ht16k33.yaml @@ -14,14 +14,21 @@ allOf: properties: compatible: - const: holtek,ht16k33 + oneOf: + - items: + - enum: + - adafruit,3108 # 0.56" 4-Digit 7-Segment FeatherWing Display (Red) + - adafruit,3130 # 0.54" Quad Alphanumeric FeatherWing Display (Red) + - const: holtek,ht16k33 + + - const: holtek,ht16k33 # Generic 16*8 LED controller with dot-matrix display reg: maxItems: 1 refresh-rate-hz: maxItems: 1 - description: Display update interval in Hertz + description: Display update interval in Hertz for dot-matrix displays interrupts: maxItems: 1 @@ -44,7 +51,14 @@ properties: required: - compatible - reg - - refresh-rate-hz + +if: + properties: + compatible: + const: holtek,ht16k33 +then: + required: + - refresh-rate-hz additionalProperties: false From afcb5a811ff3ab3969f09666535eb6018a160358 Mon Sep 17 00:00:00 2001 From: Geert Uytterhoeven Date: Tue, 19 Oct 2021 16:45:02 +0200 Subject: [PATCH 03/26] auxdisplay: img-ascii-lcd: Fix lock-up when displaying empty string While writing an empty string to a device attribute is a no-op, and thus does not need explicit safeguards, the user can still write a single newline to an attribute file: echo > .../message If that happens, img_ascii_lcd_display() trims the newline, yielding an empty string, and causing an infinite loop in img_ascii_lcd_scroll(). Fix this by adding a check for empty strings. Clear the display in case one is encountered. Fixes: 0cad855fbd083ee5 ("auxdisplay: img-ascii-lcd: driver for simple ASCII LCD displays") Signed-off-by: Geert Uytterhoeven Signed-off-by: Miguel Ojeda --- drivers/auxdisplay/img-ascii-lcd.c | 10 ++++++++++ 1 file changed, 10 insertions(+) diff --git a/drivers/auxdisplay/img-ascii-lcd.c b/drivers/auxdisplay/img-ascii-lcd.c index 1cce409ce5ca..e33ce0151cdf 100644 --- a/drivers/auxdisplay/img-ascii-lcd.c +++ b/drivers/auxdisplay/img-ascii-lcd.c @@ -280,6 +280,16 @@ static int img_ascii_lcd_display(struct img_ascii_lcd_ctx *ctx, if (msg[count - 1] == '\n') count--; + if (!count) { + /* clear the LCD */ + devm_kfree(&ctx->pdev->dev, ctx->message); + ctx->message = NULL; + ctx->message_len = 0; + memset(ctx->curr, ' ', ctx->cfg->num_chars); + ctx->cfg->update(ctx); + return 0; + } + new_msg = devm_kmalloc(&ctx->pdev->dev, count + 1, GFP_KERNEL); if (!new_msg) return -ENOMEM; From 7b88e5530f4d9d636b33d776b753a52169cc5b42 Mon Sep 17 00:00:00 2001 From: Geert Uytterhoeven Date: Tue, 19 Oct 2021 16:45:03 +0200 Subject: [PATCH 04/26] auxdisplay: img-ascii-lcd: Add helper variable dev img_ascii_lcd_probe() has many users of "pdev->dev". Add a shorthand to simplify the code. Signed-off-by: Geert Uytterhoeven Signed-off-by: Miguel Ojeda --- drivers/auxdisplay/img-ascii-lcd.c | 13 ++++++------- 1 file changed, 6 insertions(+), 7 deletions(-) diff --git a/drivers/auxdisplay/img-ascii-lcd.c b/drivers/auxdisplay/img-ascii-lcd.c index e33ce0151cdf..2b6e41ec5754 100644 --- a/drivers/auxdisplay/img-ascii-lcd.c +++ b/drivers/auxdisplay/img-ascii-lcd.c @@ -365,26 +365,25 @@ static int img_ascii_lcd_probe(struct platform_device *pdev) { const struct of_device_id *match; const struct img_ascii_lcd_config *cfg; + struct device *dev = &pdev->dev; struct img_ascii_lcd_ctx *ctx; int err; - match = of_match_device(img_ascii_lcd_matches, &pdev->dev); + match = of_match_device(img_ascii_lcd_matches, dev); if (!match) return -ENODEV; cfg = match->data; - ctx = devm_kzalloc(&pdev->dev, sizeof(*ctx) + cfg->num_chars, - GFP_KERNEL); + ctx = devm_kzalloc(dev, sizeof(*ctx) + cfg->num_chars, GFP_KERNEL); if (!ctx) return -ENOMEM; if (cfg->external_regmap) { - ctx->regmap = syscon_node_to_regmap(pdev->dev.parent->of_node); + ctx->regmap = syscon_node_to_regmap(dev->parent->of_node); if (IS_ERR(ctx->regmap)) return PTR_ERR(ctx->regmap); - if (of_property_read_u32(pdev->dev.of_node, "offset", - &ctx->offset)) + if (of_property_read_u32(dev->of_node, "offset", &ctx->offset)) return -EINVAL; } else { ctx->base = devm_platform_ioremap_resource(pdev, 0); @@ -408,7 +407,7 @@ static int img_ascii_lcd_probe(struct platform_device *pdev) if (err) goto out_del_timer; - err = device_create_file(&pdev->dev, &dev_attr_message); + err = device_create_file(dev, &dev_attr_message); if (err) goto out_del_timer; From 12a19324ebd9edc08edc0d7ff27a3662e1bb6e8c Mon Sep 17 00:00:00 2001 From: Geert Uytterhoeven Date: Tue, 19 Oct 2021 16:45:04 +0200 Subject: [PATCH 05/26] auxdisplay: img-ascii-lcd: Convert device attribute to sysfs_emit() Convert the "message" device attribute from sprintf() to sysfs_emit(), as the latter is aware of the PAGE_SIZE buffer. Signed-off-by: Geert Uytterhoeven Signed-off-by: Miguel Ojeda --- drivers/auxdisplay/img-ascii-lcd.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/auxdisplay/img-ascii-lcd.c b/drivers/auxdisplay/img-ascii-lcd.c index 2b6e41ec5754..2b5640b63890 100644 --- a/drivers/auxdisplay/img-ascii-lcd.c +++ b/drivers/auxdisplay/img-ascii-lcd.c @@ -326,7 +326,7 @@ static ssize_t message_show(struct device *dev, struct device_attribute *attr, { struct img_ascii_lcd_ctx *ctx = dev_get_drvdata(dev); - return sprintf(buf, "%s\n", ctx->message); + return sysfs_emit(buf, "%s\n", ctx->message); } /** From 7e76aece6f036cb7ada4858d6aa73825bfe22983 Mon Sep 17 00:00:00 2001 From: Geert Uytterhoeven Date: Tue, 19 Oct 2021 16:45:05 +0200 Subject: [PATCH 06/26] auxdisplay: Extract character line display core support Extract the character line display core support from the simple ASCII LCD driver for the MIPS Boston, Malta & SEAD3 development boards into its own subdriver, so it can be reused for other displays. As this moves the "message" device attribute in sysfs in a "linedisp.N" subdirectory, a symlink is added to preserve backwards compatibility. Signed-off-by: Geert Uytterhoeven Signed-off-by: Miguel Ojeda --- drivers/auxdisplay/Kconfig | 7 + drivers/auxdisplay/Makefile | 1 + drivers/auxdisplay/img-ascii-lcd.c | 206 ++++--------------------- drivers/auxdisplay/line-display.c | 231 +++++++++++++++++++++++++++++ drivers/auxdisplay/line-display.h | 43 ++++++ 5 files changed, 313 insertions(+), 175 deletions(-) create mode 100644 drivers/auxdisplay/line-display.c create mode 100644 drivers/auxdisplay/line-display.h diff --git a/drivers/auxdisplay/Kconfig b/drivers/auxdisplay/Kconfig index 1509cb74705a..b41fdc5f7bf7 100644 --- a/drivers/auxdisplay/Kconfig +++ b/drivers/auxdisplay/Kconfig @@ -25,6 +25,12 @@ config CHARLCD This is some character LCD core interface that multiple drivers can use. +config LINEDISP + tristate "Character line display core support" if COMPILE_TEST + help + This is the core support for single-line character displays, to be + selected by drivers that use it. + config HD44780_COMMON tristate "Common functions for HD44780 (and compatibles) LCD displays" if COMPILE_TEST select CHARLCD @@ -155,6 +161,7 @@ config IMG_ASCII_LCD depends on HAS_IOMEM default y if MIPS_MALTA select MFD_SYSCON + select LINEDISP help Enable this to support the simple ASCII LCD displays found on development boards such as the MIPS Boston, MIPS Malta & MIPS SEAD3 diff --git a/drivers/auxdisplay/Makefile b/drivers/auxdisplay/Makefile index 307771027c89..6968ed4d3f0a 100644 --- a/drivers/auxdisplay/Makefile +++ b/drivers/auxdisplay/Makefile @@ -13,3 +13,4 @@ obj-$(CONFIG_HD44780) += hd44780.o obj-$(CONFIG_HT16K33) += ht16k33.o obj-$(CONFIG_PARPORT_PANEL) += panel.o obj-$(CONFIG_LCD2S) += lcd2s.o +obj-$(CONFIG_LINEDISP) += line-display.o diff --git a/drivers/auxdisplay/img-ascii-lcd.c b/drivers/auxdisplay/img-ascii-lcd.c index 2b5640b63890..fa23e415f260 100644 --- a/drivers/auxdisplay/img-ascii-lcd.c +++ b/drivers/auxdisplay/img-ascii-lcd.c @@ -4,7 +4,6 @@ * Author: Paul Burton */ -#include #include #include #include @@ -14,7 +13,8 @@ #include #include #include -#include + +#include "line-display.h" struct img_ascii_lcd_ctx; @@ -27,36 +27,26 @@ struct img_ascii_lcd_ctx; struct img_ascii_lcd_config { unsigned int num_chars; bool external_regmap; - void (*update)(struct img_ascii_lcd_ctx *ctx); + void (*update)(struct linedisp *linedisp); }; /** * struct img_ascii_lcd_ctx - Private data structure - * @pdev: the ASCII LCD platform device * @base: the base address of the LCD registers * @regmap: the regmap through which LCD registers are accessed * @offset: the offset within regmap to the start of the LCD registers * @cfg: pointer to the LCD model configuration - * @message: the full message to display or scroll on the LCD - * @message_len: the length of the @message string - * @scroll_pos: index of the first character of @message currently displayed - * @scroll_rate: scroll interval in jiffies - * @timer: timer used to implement scrolling + * @linedisp: line display structure * @curr: the string currently displayed on the LCD */ struct img_ascii_lcd_ctx { - struct platform_device *pdev; union { void __iomem *base; struct regmap *regmap; }; u32 offset; const struct img_ascii_lcd_config *cfg; - char *message; - unsigned int message_len; - unsigned int scroll_pos; - unsigned int scroll_rate; - struct timer_list timer; + struct linedisp linedisp; char curr[] __aligned(8); }; @@ -64,8 +54,10 @@ struct img_ascii_lcd_ctx { * MIPS Boston development board */ -static void boston_update(struct img_ascii_lcd_ctx *ctx) +static void boston_update(struct linedisp *linedisp) { + struct img_ascii_lcd_ctx *ctx = + container_of(linedisp, struct img_ascii_lcd_ctx, linedisp); ulong val; #if BITS_PER_LONG == 64 @@ -90,12 +82,14 @@ static struct img_ascii_lcd_config boston_config = { * MIPS Malta development board */ -static void malta_update(struct img_ascii_lcd_ctx *ctx) +static void malta_update(struct linedisp *linedisp) { + struct img_ascii_lcd_ctx *ctx = + container_of(linedisp, struct img_ascii_lcd_ctx, linedisp); unsigned int i; int err = 0; - for (i = 0; i < ctx->cfg->num_chars; i++) { + for (i = 0; i < linedisp->num_chars; i++) { err = regmap_write(ctx->regmap, ctx->offset + (i * 8), ctx->curr[i]); if (err) @@ -173,12 +167,14 @@ static int sead3_wait_lcd_idle(struct img_ascii_lcd_ctx *ctx) return 0; } -static void sead3_update(struct img_ascii_lcd_ctx *ctx) +static void sead3_update(struct linedisp *linedisp) { + struct img_ascii_lcd_ctx *ctx = + container_of(linedisp, struct img_ascii_lcd_ctx, linedisp); unsigned int i; int err = 0; - for (i = 0; i < ctx->cfg->num_chars; i++) { + for (i = 0; i < linedisp->num_chars; i++) { err = sead3_wait_lcd_idle(ctx); if (err) break; @@ -218,140 +214,6 @@ static const struct of_device_id img_ascii_lcd_matches[] = { }; MODULE_DEVICE_TABLE(of, img_ascii_lcd_matches); -/** - * img_ascii_lcd_scroll() - scroll the display by a character - * @t: really a pointer to the private data structure - * - * Scroll the current message along the LCD by one character, rearming the - * timer if required. - */ -static void img_ascii_lcd_scroll(struct timer_list *t) -{ - struct img_ascii_lcd_ctx *ctx = from_timer(ctx, t, timer); - unsigned int i, ch = ctx->scroll_pos; - unsigned int num_chars = ctx->cfg->num_chars; - - /* update the current message string */ - for (i = 0; i < num_chars;) { - /* copy as many characters from the string as possible */ - for (; i < num_chars && ch < ctx->message_len; i++, ch++) - ctx->curr[i] = ctx->message[ch]; - - /* wrap around to the start of the string */ - ch = 0; - } - - /* update the LCD */ - ctx->cfg->update(ctx); - - /* move on to the next character */ - ctx->scroll_pos++; - ctx->scroll_pos %= ctx->message_len; - - /* rearm the timer */ - if (ctx->message_len > ctx->cfg->num_chars) - mod_timer(&ctx->timer, jiffies + ctx->scroll_rate); -} - -/** - * img_ascii_lcd_display() - set the message to be displayed - * @ctx: pointer to the private data structure - * @msg: the message to display - * @count: length of msg, or -1 - * - * Display a new message @msg on the LCD. @msg can be longer than the number of - * characters the LCD can display, in which case it will begin scrolling across - * the LCD display. - * - * Return: 0 on success, -ENOMEM on memory allocation failure - */ -static int img_ascii_lcd_display(struct img_ascii_lcd_ctx *ctx, - const char *msg, ssize_t count) -{ - char *new_msg; - - /* stop the scroll timer */ - del_timer_sync(&ctx->timer); - - if (count == -1) - count = strlen(msg); - - /* if the string ends with a newline, trim it */ - if (msg[count - 1] == '\n') - count--; - - if (!count) { - /* clear the LCD */ - devm_kfree(&ctx->pdev->dev, ctx->message); - ctx->message = NULL; - ctx->message_len = 0; - memset(ctx->curr, ' ', ctx->cfg->num_chars); - ctx->cfg->update(ctx); - return 0; - } - - new_msg = devm_kmalloc(&ctx->pdev->dev, count + 1, GFP_KERNEL); - if (!new_msg) - return -ENOMEM; - - memcpy(new_msg, msg, count); - new_msg[count] = 0; - - if (ctx->message) - devm_kfree(&ctx->pdev->dev, ctx->message); - - ctx->message = new_msg; - ctx->message_len = count; - ctx->scroll_pos = 0; - - /* update the LCD */ - img_ascii_lcd_scroll(&ctx->timer); - - return 0; -} - -/** - * message_show() - read message via sysfs - * @dev: the LCD device - * @attr: the LCD message attribute - * @buf: the buffer to read the message into - * - * Read the current message being displayed or scrolled across the LCD display - * into @buf, for reads from sysfs. - * - * Return: the number of characters written to @buf - */ -static ssize_t message_show(struct device *dev, struct device_attribute *attr, - char *buf) -{ - struct img_ascii_lcd_ctx *ctx = dev_get_drvdata(dev); - - return sysfs_emit(buf, "%s\n", ctx->message); -} - -/** - * message_store() - write a new message via sysfs - * @dev: the LCD device - * @attr: the LCD message attribute - * @buf: the buffer containing the new message - * @count: the size of the message in @buf - * - * Write a new message to display or scroll across the LCD display from sysfs. - * - * Return: the size of the message on success, else -ERRNO - */ -static ssize_t message_store(struct device *dev, struct device_attribute *attr, - const char *buf, size_t count) -{ - struct img_ascii_lcd_ctx *ctx = dev_get_drvdata(dev); - int err; - - err = img_ascii_lcd_display(ctx, buf, count); - return err ?: count; -} - -static DEVICE_ATTR_RW(message); - /** * img_ascii_lcd_probe() - probe an LCD display device * @pdev: the LCD platform device @@ -391,29 +253,23 @@ static int img_ascii_lcd_probe(struct platform_device *pdev) return PTR_ERR(ctx->base); } - ctx->pdev = pdev; - ctx->cfg = cfg; - ctx->message = NULL; - ctx->scroll_pos = 0; - ctx->scroll_rate = HZ / 2; + err = linedisp_register(&ctx->linedisp, dev, cfg->num_chars, ctx->curr, + cfg->update); + if (err) + return err; - /* initialise a timer for scrolling the message */ - timer_setup(&ctx->timer, img_ascii_lcd_scroll, 0); + /* for backwards compatibility */ + err = compat_only_sysfs_link_entry_to_kobj(&dev->kobj, + &ctx->linedisp.dev.kobj, + "message", NULL); + if (err) + goto err_unregister; platform_set_drvdata(pdev, ctx); - - /* display a default message */ - err = img_ascii_lcd_display(ctx, "Linux " UTS_RELEASE " ", -1); - if (err) - goto out_del_timer; - - err = device_create_file(dev, &dev_attr_message); - if (err) - goto out_del_timer; - return 0; -out_del_timer: - del_timer_sync(&ctx->timer); + +err_unregister: + linedisp_unregister(&ctx->linedisp); return err; } @@ -430,8 +286,8 @@ static int img_ascii_lcd_remove(struct platform_device *pdev) { struct img_ascii_lcd_ctx *ctx = platform_get_drvdata(pdev); - device_remove_file(&pdev->dev, &dev_attr_message); - del_timer_sync(&ctx->timer); + sysfs_remove_link(&pdev->dev.kobj, "message"); + linedisp_unregister(&ctx->linedisp); return 0; } diff --git a/drivers/auxdisplay/line-display.c b/drivers/auxdisplay/line-display.c new file mode 100644 index 000000000000..4b97c20ac0b3 --- /dev/null +++ b/drivers/auxdisplay/line-display.c @@ -0,0 +1,231 @@ +// SPDX-License-Identifier: GPL-2.0-or-later +/* + * Character line display core support + * + * Copyright (C) 2016 Imagination Technologies + * Author: Paul Burton + * + * Copyright (C) 2021 Glider bv + */ + +#include + +#include +#include +#include +#include +#include +#include + +#include "line-display.h" + +/** + * linedisp_scroll() - scroll the display by a character + * @t: really a pointer to the private data structure + * + * Scroll the current message along the display by one character, rearming the + * timer if required. + */ +static void linedisp_scroll(struct timer_list *t) +{ + struct linedisp *linedisp = from_timer(linedisp, t, timer); + unsigned int i, ch = linedisp->scroll_pos; + unsigned int num_chars = linedisp->num_chars; + + /* update the current message string */ + for (i = 0; i < num_chars;) { + /* copy as many characters from the string as possible */ + for (; i < num_chars && ch < linedisp->message_len; i++, ch++) + linedisp->buf[i] = linedisp->message[ch]; + + /* wrap around to the start of the string */ + ch = 0; + } + + /* update the display */ + linedisp->update(linedisp); + + /* move on to the next character */ + linedisp->scroll_pos++; + linedisp->scroll_pos %= linedisp->message_len; + + /* rearm the timer */ + if (linedisp->message_len > num_chars) + mod_timer(&linedisp->timer, jiffies + linedisp->scroll_rate); +} + +/** + * linedisp_display() - set the message to be displayed + * @linedisp: pointer to the private data structure + * @msg: the message to display + * @count: length of msg, or -1 + * + * Display a new message @msg on the display. @msg can be longer than the + * number of characters the display can display, in which case it will begin + * scrolling across the display. + * + * Return: 0 on success, -ENOMEM on memory allocation failure + */ +static int linedisp_display(struct linedisp *linedisp, const char *msg, + ssize_t count) +{ + char *new_msg; + + /* stop the scroll timer */ + del_timer_sync(&linedisp->timer); + + if (count == -1) + count = strlen(msg); + + /* if the string ends with a newline, trim it */ + if (msg[count - 1] == '\n') + count--; + + if (!count) { + /* Clear the display */ + kfree(linedisp->message); + linedisp->message = NULL; + linedisp->message_len = 0; + memset(linedisp->buf, ' ', linedisp->num_chars); + linedisp->update(linedisp); + return 0; + } + + new_msg = kmalloc(count + 1, GFP_KERNEL); + if (!new_msg) + return -ENOMEM; + + memcpy(new_msg, msg, count); + new_msg[count] = 0; + + kfree(linedisp->message); + + linedisp->message = new_msg; + linedisp->message_len = count; + linedisp->scroll_pos = 0; + + /* update the display */ + linedisp_scroll(&linedisp->timer); + + return 0; +} + +/** + * message_show() - read message via sysfs + * @dev: the display device + * @attr: the display message attribute + * @buf: the buffer to read the message into + * + * Read the current message being displayed or scrolled across the display into + * @buf, for reads from sysfs. + * + * Return: the number of characters written to @buf + */ +static ssize_t message_show(struct device *dev, struct device_attribute *attr, + char *buf) +{ + struct linedisp *linedisp = container_of(dev, struct linedisp, dev); + + return sysfs_emit(buf, "%s\n", linedisp->message); +} + +/** + * message_store() - write a new message via sysfs + * @dev: the display device + * @attr: the display message attribute + * @buf: the buffer containing the new message + * @count: the size of the message in @buf + * + * Write a new message to display or scroll across the display from sysfs. + * + * Return: the size of the message on success, else -ERRNO + */ +static ssize_t message_store(struct device *dev, struct device_attribute *attr, + const char *buf, size_t count) +{ + struct linedisp *linedisp = container_of(dev, struct linedisp, dev); + int err; + + err = linedisp_display(linedisp, buf, count); + return err ?: count; +} + +static DEVICE_ATTR_RW(message); + +static struct attribute *linedisp_attrs[] = { + &dev_attr_message.attr, + NULL, +}; +ATTRIBUTE_GROUPS(linedisp); + +static const struct device_type linedisp_type = { + .groups = linedisp_groups, +}; + +/** + * linedisp_register - register a character line display + * @linedisp: pointer to character line display structure + * @parent: parent device + * @num_chars: the number of characters that can be displayed + * @buf: pointer to a buffer that can hold @num_chars characters + * @update: Function called to update the display. This must not sleep! + * + * Return: zero on success, else a negative error code. + */ +int linedisp_register(struct linedisp *linedisp, struct device *parent, + unsigned int num_chars, char *buf, + void (*update)(struct linedisp *linedisp)) +{ + static atomic_t linedisp_id = ATOMIC_INIT(-1); + int err; + + memset(linedisp, 0, sizeof(*linedisp)); + linedisp->dev.parent = parent; + linedisp->dev.type = &linedisp_type; + linedisp->update = update; + linedisp->buf = buf; + linedisp->num_chars = num_chars; + linedisp->scroll_rate = HZ / 2; + + device_initialize(&linedisp->dev); + dev_set_name(&linedisp->dev, "linedisp.%lu", + (unsigned long)atomic_inc_return(&linedisp_id)); + + /* initialise a timer for scrolling the message */ + timer_setup(&linedisp->timer, linedisp_scroll, 0); + + err = device_add(&linedisp->dev); + if (err) + goto out_del_timer; + + /* display a default message */ + err = linedisp_display(linedisp, "Linux " UTS_RELEASE " ", -1); + if (err) + goto out_del_dev; + + return 0; + +out_del_dev: + device_del(&linedisp->dev); +out_del_timer: + del_timer_sync(&linedisp->timer); + put_device(&linedisp->dev); + return err; +} +EXPORT_SYMBOL_GPL(linedisp_register); + +/** + * linedisp_unregister - unregister a character line display + * @linedisp: pointer to character line display structure registered previously + * with linedisp_register() + */ +void linedisp_unregister(struct linedisp *linedisp) +{ + device_del(&linedisp->dev); + del_timer_sync(&linedisp->timer); + kfree(linedisp->message); + put_device(&linedisp->dev); +} +EXPORT_SYMBOL_GPL(linedisp_unregister); + +MODULE_LICENSE("GPL"); diff --git a/drivers/auxdisplay/line-display.h b/drivers/auxdisplay/line-display.h new file mode 100644 index 000000000000..0f5891d34c48 --- /dev/null +++ b/drivers/auxdisplay/line-display.h @@ -0,0 +1,43 @@ +/* SPDX-License-Identifier: GPL-2.0-or-later */ +/* + * Character line display core support + * + * Copyright (C) 2016 Imagination Technologies + * Author: Paul Burton + * + * Copyright (C) 2021 Glider bv + */ + +#ifndef _LINEDISP_H +#define _LINEDISP_H + +/** + * struct linedisp - character line display private data structure + * @dev: the line display device + * @timer: timer used to implement scrolling + * @update: function called to update the display + * @buf: pointer to the buffer for the string currently displayed + * @message: the full message to display or scroll on the display + * @num_chars: the number of characters that can be displayed + * @message_len: the length of the @message string + * @scroll_pos: index of the first character of @message currently displayed + * @scroll_rate: scroll interval in jiffies + */ +struct linedisp { + struct device dev; + struct timer_list timer; + void (*update)(struct linedisp *linedisp); + char *buf; + char *message; + unsigned int num_chars; + unsigned int message_len; + unsigned int scroll_pos; + unsigned int scroll_rate; +}; + +int linedisp_register(struct linedisp *linedisp, struct device *parent, + unsigned int num_chars, char *buf, + void (*update)(struct linedisp *linedisp)); +void linedisp_unregister(struct linedisp *linedisp); + +#endif /* LINEDISP_H */ From 364f2c392f2b38ba3c52933f11a8dbee71f28864 Mon Sep 17 00:00:00 2001 From: Geert Uytterhoeven Date: Tue, 19 Oct 2021 16:45:06 +0200 Subject: [PATCH 07/26] auxdisplay: linedisp: Use kmemdup_nul() helper Use the existing kmemdup_nul() helper instead of open-coding the same operation. Signed-off-by: Geert Uytterhoeven Signed-off-by: Miguel Ojeda --- drivers/auxdisplay/line-display.c | 5 +---- 1 file changed, 1 insertion(+), 4 deletions(-) diff --git a/drivers/auxdisplay/line-display.c b/drivers/auxdisplay/line-display.c index 4b97c20ac0b3..3f35199bc39f 100644 --- a/drivers/auxdisplay/line-display.c +++ b/drivers/auxdisplay/line-display.c @@ -91,13 +91,10 @@ static int linedisp_display(struct linedisp *linedisp, const char *msg, return 0; } - new_msg = kmalloc(count + 1, GFP_KERNEL); + new_msg = kmemdup_nul(msg, count, GFP_KERNEL); if (!new_msg) return -ENOMEM; - memcpy(new_msg, msg, count); - new_msg[count] = 0; - kfree(linedisp->message); linedisp->message = new_msg; From d79141c39fe15ef17bcdaf7ff106c066486fbbfe Mon Sep 17 00:00:00 2001 From: Geert Uytterhoeven Date: Tue, 19 Oct 2021 16:45:07 +0200 Subject: [PATCH 08/26] auxdisplay: linedisp: Add support for changing scroll rate If the message to display is longer than the number of characters that the display can show, the message will be scrolled. Currently the scroll rate is fixed, moving every 500 ms. Add support for changing the scroll rate through a "scroll_step_ms" device attribute in sysfs. Signed-off-by: Geert Uytterhoeven Signed-off-by: Miguel Ojeda --- drivers/auxdisplay/line-display.c | 37 +++++++++++++++++++++++++++++-- 1 file changed, 35 insertions(+), 2 deletions(-) diff --git a/drivers/auxdisplay/line-display.c b/drivers/auxdisplay/line-display.c index 3f35199bc39f..03e7f104aa1a 100644 --- a/drivers/auxdisplay/line-display.c +++ b/drivers/auxdisplay/line-display.c @@ -19,6 +19,8 @@ #include "line-display.h" +#define DEFAULT_SCROLL_RATE (HZ / 2) + /** * linedisp_scroll() - scroll the display by a character * @t: really a pointer to the private data structure @@ -50,7 +52,7 @@ static void linedisp_scroll(struct timer_list *t) linedisp->scroll_pos %= linedisp->message_len; /* rearm the timer */ - if (linedisp->message_len > num_chars) + if (linedisp->message_len > num_chars && linedisp->scroll_rate) mod_timer(&linedisp->timer, jiffies + linedisp->scroll_rate); } @@ -149,8 +151,39 @@ static ssize_t message_store(struct device *dev, struct device_attribute *attr, static DEVICE_ATTR_RW(message); +static ssize_t scroll_step_ms_show(struct device *dev, + struct device_attribute *attr, char *buf) +{ + struct linedisp *linedisp = container_of(dev, struct linedisp, dev); + + return sysfs_emit(buf, "%u\n", jiffies_to_msecs(linedisp->scroll_rate)); +} + +static ssize_t scroll_step_ms_store(struct device *dev, + struct device_attribute *attr, + const char *buf, size_t count) +{ + struct linedisp *linedisp = container_of(dev, struct linedisp, dev); + unsigned int ms; + + if (kstrtouint(buf, 10, &ms) != 0) + return -EINVAL; + + linedisp->scroll_rate = msecs_to_jiffies(ms); + if (linedisp->message && linedisp->message_len > linedisp->num_chars) { + del_timer_sync(&linedisp->timer); + if (linedisp->scroll_rate) + linedisp_scroll(&linedisp->timer); + } + + return count; +} + +static DEVICE_ATTR_RW(scroll_step_ms); + static struct attribute *linedisp_attrs[] = { &dev_attr_message.attr, + &dev_attr_scroll_step_ms.attr, NULL, }; ATTRIBUTE_GROUPS(linedisp); @@ -182,7 +215,7 @@ int linedisp_register(struct linedisp *linedisp, struct device *parent, linedisp->update = update; linedisp->buf = buf; linedisp->num_chars = num_chars; - linedisp->scroll_rate = HZ / 2; + linedisp->scroll_rate = DEFAULT_SCROLL_RATE; device_initialize(&linedisp->dev); dev_set_name(&linedisp->dev, "linedisp.%lu", From 80f9eb70fd9276938f0a131f76d438021bfd8b34 Mon Sep 17 00:00:00 2001 From: Geert Uytterhoeven Date: Tue, 19 Oct 2021 16:45:08 +0200 Subject: [PATCH 09/26] auxdisplay: ht16k33: Connect backlight to fbdev Currently /sys/class/graphics/fb0/bl_curve is not accessible (-ENODEV), as the driver does not connect the backlight to the frame buffer device. Fix this moving backlight initialization up, and filling in fb_info.bl_dev. Fixes: 8992da44c6805d53 ("auxdisplay: ht16k33: Driver for LED controller") Signed-off-by: Geert Uytterhoeven Reviewed-by: Robin van der Gracht Signed-off-by: Miguel Ojeda --- drivers/auxdisplay/ht16k33.c | 56 ++++++++++++++++++------------------ 1 file changed, 28 insertions(+), 28 deletions(-) diff --git a/drivers/auxdisplay/ht16k33.c b/drivers/auxdisplay/ht16k33.c index 1e69cc6d21a0..2b630e194570 100644 --- a/drivers/auxdisplay/ht16k33.c +++ b/drivers/auxdisplay/ht16k33.c @@ -413,6 +413,33 @@ static int ht16k33_probe(struct i2c_client *client, if (err) return err; + /* Backlight */ + memset(&bl_props, 0, sizeof(struct backlight_properties)); + bl_props.type = BACKLIGHT_RAW; + bl_props.max_brightness = MAX_BRIGHTNESS; + + bl = devm_backlight_device_register(&client->dev, DRIVER_NAME"-bl", + &client->dev, priv, + &ht16k33_bl_ops, &bl_props); + if (IS_ERR(bl)) { + dev_err(&client->dev, "failed to register backlight\n"); + return PTR_ERR(bl); + } + + err = of_property_read_u32(node, "default-brightness-level", + &dft_brightness); + if (err) { + dft_brightness = MAX_BRIGHTNESS; + } else if (dft_brightness > MAX_BRIGHTNESS) { + dev_warn(&client->dev, + "invalid default brightness level: %u, using %u\n", + dft_brightness, MAX_BRIGHTNESS); + dft_brightness = MAX_BRIGHTNESS; + } + + bl->props.brightness = dft_brightness; + ht16k33_bl_update_status(bl); + /* Framebuffer (2 bytes per column) */ BUILD_BUG_ON(PAGE_SIZE < HT16K33_FB_SIZE); fbdev->buffer = (unsigned char *) get_zeroed_page(GFP_KERNEL); @@ -445,6 +472,7 @@ static int ht16k33_probe(struct i2c_client *client, fbdev->info->screen_size = HT16K33_FB_SIZE; fbdev->info->fix = ht16k33_fb_fix; fbdev->info->var = ht16k33_fb_var; + fbdev->info->bl_dev = bl; fbdev->info->pseudo_palette = NULL; fbdev->info->flags = FBINFO_FLAG_DEFAULT; fbdev->info->par = priv; @@ -460,34 +488,6 @@ static int ht16k33_probe(struct i2c_client *client, goto err_fbdev_unregister; } - /* Backlight */ - memset(&bl_props, 0, sizeof(struct backlight_properties)); - bl_props.type = BACKLIGHT_RAW; - bl_props.max_brightness = MAX_BRIGHTNESS; - - bl = devm_backlight_device_register(&client->dev, DRIVER_NAME"-bl", - &client->dev, priv, - &ht16k33_bl_ops, &bl_props); - if (IS_ERR(bl)) { - dev_err(&client->dev, "failed to register backlight\n"); - err = PTR_ERR(bl); - goto err_fbdev_unregister; - } - - err = of_property_read_u32(node, "default-brightness-level", - &dft_brightness); - if (err) { - dft_brightness = MAX_BRIGHTNESS; - } else if (dft_brightness > MAX_BRIGHTNESS) { - dev_warn(&client->dev, - "invalid default brightness level: %u, using %u\n", - dft_brightness, MAX_BRIGHTNESS); - dft_brightness = MAX_BRIGHTNESS; - } - - bl->props.brightness = dft_brightness; - ht16k33_bl_update_status(bl); - ht16k33_fb_queue(priv); return 0; From 840fe258332544aa7321921e1723d37b772af7a9 Mon Sep 17 00:00:00 2001 From: Geert Uytterhoeven Date: Tue, 19 Oct 2021 16:45:09 +0200 Subject: [PATCH 10/26] auxdisplay: ht16k33: Fix frame buffer device blanking As the ht16k33 frame buffer sub-driver does not register an fb_ops.fb_blank() handler, blanking does not work: $ echo 1 > /sys/class/graphics/fb0/blank sh: write error: Invalid argument Fix this by providing a handler that always returns zero, to make sure blank events will be sent to the actual device handling the backlight. Reported-by: Robin van der Gracht Suggested-by: Robin van der Gracht Fixes: 8992da44c6805d53 ("auxdisplay: ht16k33: Driver for LED controller") Signed-off-by: Geert Uytterhoeven Signed-off-by: Miguel Ojeda --- drivers/auxdisplay/ht16k33.c | 10 ++++++++++ 1 file changed, 10 insertions(+) diff --git a/drivers/auxdisplay/ht16k33.c b/drivers/auxdisplay/ht16k33.c index 2b630e194570..ed5808349990 100644 --- a/drivers/auxdisplay/ht16k33.c +++ b/drivers/auxdisplay/ht16k33.c @@ -219,6 +219,15 @@ static const struct backlight_ops ht16k33_bl_ops = { .check_fb = ht16k33_bl_check_fb, }; +/* + * Blank events will be passed to the actual device handling the backlight when + * we return zero here. + */ +static int ht16k33_blank(int blank, struct fb_info *info) +{ + return 0; +} + static int ht16k33_mmap(struct fb_info *info, struct vm_area_struct *vma) { struct ht16k33_priv *priv = info->par; @@ -231,6 +240,7 @@ static const struct fb_ops ht16k33_fb_ops = { .owner = THIS_MODULE, .fb_read = fb_sys_read, .fb_write = fb_sys_write, + .fb_blank = ht16k33_blank, .fb_fillrect = sys_fillrect, .fb_copyarea = sys_copyarea, .fb_imageblit = sys_imageblit, From fb61e137c004c160f772461ec39953d54f5c9aaf Mon Sep 17 00:00:00 2001 From: Geert Uytterhoeven Date: Tue, 19 Oct 2021 16:45:10 +0200 Subject: [PATCH 11/26] auxdisplay: ht16k33: Use HT16K33_FB_SIZE in ht16k33_initialize() Use the existing HT16K33_FB_SIZE definition instead of open-coding the same calculation using an hardcoded value. While at it, restore reverse Christmas tree variable declaration order. Signed-off-by: Geert Uytterhoeven Acked-by: Robin van der Gracht Signed-off-by: Miguel Ojeda --- drivers/auxdisplay/ht16k33.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/auxdisplay/ht16k33.c b/drivers/auxdisplay/ht16k33.c index ed5808349990..fed2f8bd2d27 100644 --- a/drivers/auxdisplay/ht16k33.c +++ b/drivers/auxdisplay/ht16k33.c @@ -168,9 +168,9 @@ requeue: static int ht16k33_initialize(struct ht16k33_priv *priv) { + uint8_t data[HT16K33_FB_SIZE]; uint8_t byte; int err; - uint8_t data[HT16K33_MATRIX_LED_MAX_COLS * 2]; /* Clear RAM (8 * 16 bits) */ memset(data, 0, sizeof(data)); From 11b92913d1cafeca5bc7c398bf6075dd00e0b8a7 Mon Sep 17 00:00:00 2001 From: Geert Uytterhoeven Date: Tue, 19 Oct 2021 16:45:11 +0200 Subject: [PATCH 12/26] auxdisplay: ht16k33: Remove unneeded error check in keypad probe() There is no need to check the return code of input_register_device(), just propagate it to the caller. Signed-off-by: Geert Uytterhoeven Acked-by: Robin van der Gracht Signed-off-by: Miguel Ojeda --- drivers/auxdisplay/ht16k33.c | 6 +----- 1 file changed, 1 insertion(+), 5 deletions(-) diff --git a/drivers/auxdisplay/ht16k33.c b/drivers/auxdisplay/ht16k33.c index fed2f8bd2d27..1ce73c4172c8 100644 --- a/drivers/auxdisplay/ht16k33.c +++ b/drivers/auxdisplay/ht16k33.c @@ -388,11 +388,7 @@ static int ht16k33_keypad_probe(struct i2c_client *client, ht16k33_keypad_stop(keypad->dev); - err = input_register_device(keypad->dev); - if (err) - return err; - - return 0; + return input_register_device(keypad->dev); } static int ht16k33_probe(struct i2c_client *client, From e66b4f4f52793a745b802acea77394ebcf8ff619 Mon Sep 17 00:00:00 2001 From: Geert Uytterhoeven Date: Tue, 19 Oct 2021 16:45:12 +0200 Subject: [PATCH 13/26] auxdisplay: ht16k33: Convert to simple i2c probe function ht16k33_probe() does not use the passed i2c_device_id, so the driver can be converted trivially to the new-style of i2c probing. Signed-off-by: Geert Uytterhoeven Acked-by: Robin van der Gracht Signed-off-by: Miguel Ojeda --- drivers/auxdisplay/ht16k33.c | 5 ++--- 1 file changed, 2 insertions(+), 3 deletions(-) diff --git a/drivers/auxdisplay/ht16k33.c b/drivers/auxdisplay/ht16k33.c index 1ce73c4172c8..d0d7b55059aa 100644 --- a/drivers/auxdisplay/ht16k33.c +++ b/drivers/auxdisplay/ht16k33.c @@ -391,8 +391,7 @@ static int ht16k33_keypad_probe(struct i2c_client *client, return input_register_device(keypad->dev); } -static int ht16k33_probe(struct i2c_client *client, - const struct i2c_device_id *id) +static int ht16k33_probe(struct i2c_client *client) { int err; uint32_t dft_brightness; @@ -533,7 +532,7 @@ static const struct of_device_id ht16k33_of_match[] = { MODULE_DEVICE_TABLE(of, ht16k33_of_match); static struct i2c_driver ht16k33_driver = { - .probe = ht16k33_probe, + .probe_new = ht16k33_probe, .remove = ht16k33_remove, .driver = { .name = DRIVER_NAME, From d08a44d86f9e5533eda39b5a4bbea9ecf960dfe3 Mon Sep 17 00:00:00 2001 From: Geert Uytterhoeven Date: Tue, 19 Oct 2021 16:45:13 +0200 Subject: [PATCH 14/26] auxdisplay: ht16k33: Add helper variable dev This driver has many users of "client->dev". Add shorthands to simplify the code. Signed-off-by: Geert Uytterhoeven Acked-by: Robin van der Gracht Signed-off-by: Miguel Ojeda --- drivers/auxdisplay/ht16k33.c | 43 ++++++++++++++++++------------------ 1 file changed, 22 insertions(+), 21 deletions(-) diff --git a/drivers/auxdisplay/ht16k33.c b/drivers/auxdisplay/ht16k33.c index d0d7b55059aa..dcf530a9390b 100644 --- a/drivers/auxdisplay/ht16k33.c +++ b/drivers/auxdisplay/ht16k33.c @@ -326,7 +326,8 @@ static void ht16k33_keypad_stop(struct input_dev *dev) static int ht16k33_keypad_probe(struct i2c_client *client, struct ht16k33_keypad *keypad) { - struct device_node *node = client->dev.of_node; + struct device *dev = &client->dev; + struct device_node *node = dev->of_node; u32 rows = HT16K33_MATRIX_KEYPAD_MAX_ROWS; u32 cols = HT16K33_MATRIX_KEYPAD_MAX_COLS; int err; @@ -334,7 +335,7 @@ static int ht16k33_keypad_probe(struct i2c_client *client, keypad->client = client; init_waitqueue_head(&keypad->wait); - keypad->dev = devm_input_allocate_device(&client->dev); + keypad->dev = devm_input_allocate_device(dev); if (!keypad->dev) return -ENOMEM; @@ -351,17 +352,17 @@ static int ht16k33_keypad_probe(struct i2c_client *client, err = of_property_read_u32(node, "debounce-delay-ms", &keypad->debounce_ms); if (err) { - dev_err(&client->dev, "key debounce delay not specified\n"); + dev_err(dev, "key debounce delay not specified\n"); return err; } - err = matrix_keypad_parse_of_params(&client->dev, &rows, &cols); + err = matrix_keypad_parse_of_params(dev, &rows, &cols); if (err) return err; if (rows > HT16K33_MATRIX_KEYPAD_MAX_ROWS || cols > HT16K33_MATRIX_KEYPAD_MAX_COLS) { - dev_err(&client->dev, "%u rows or %u cols out of range in DT\n", - rows, cols); + dev_err(dev, "%u rows or %u cols out of range in DT\n", rows, + cols); return -ERANGE; } @@ -372,17 +373,17 @@ static int ht16k33_keypad_probe(struct i2c_client *client, err = matrix_keypad_build_keymap(NULL, NULL, rows, cols, NULL, keypad->dev); if (err) { - dev_err(&client->dev, "failed to build keymap\n"); + dev_err(dev, "failed to build keymap\n"); return err; } - err = devm_request_threaded_irq(&client->dev, client->irq, - NULL, ht16k33_keypad_irq_thread, + err = devm_request_threaded_irq(dev, client->irq, NULL, + ht16k33_keypad_irq_thread, IRQF_TRIGGER_HIGH | IRQF_ONESHOT, DRIVER_NAME, keypad); if (err) { - dev_err(&client->dev, "irq request failed %d, error %d\n", - client->irq, err); + dev_err(dev, "irq request failed %d, error %d\n", client->irq, + err); return err; } @@ -399,14 +400,15 @@ static int ht16k33_probe(struct i2c_client *client) struct backlight_properties bl_props; struct ht16k33_priv *priv; struct ht16k33_fbdev *fbdev; - struct device_node *node = client->dev.of_node; + struct device *dev = &client->dev; + struct device_node *node = dev->of_node; if (!i2c_check_functionality(client->adapter, I2C_FUNC_I2C)) { - dev_err(&client->dev, "i2c_check_functionality error\n"); + dev_err(dev, "i2c_check_functionality error\n"); return -EIO; } - priv = devm_kzalloc(&client->dev, sizeof(*priv), GFP_KERNEL); + priv = devm_kzalloc(dev, sizeof(*priv), GFP_KERNEL); if (!priv) return -ENOMEM; @@ -423,11 +425,10 @@ static int ht16k33_probe(struct i2c_client *client) bl_props.type = BACKLIGHT_RAW; bl_props.max_brightness = MAX_BRIGHTNESS; - bl = devm_backlight_device_register(&client->dev, DRIVER_NAME"-bl", - &client->dev, priv, + bl = devm_backlight_device_register(dev, DRIVER_NAME"-bl", dev, priv, &ht16k33_bl_ops, &bl_props); if (IS_ERR(bl)) { - dev_err(&client->dev, "failed to register backlight\n"); + dev_err(dev, "failed to register backlight\n"); return PTR_ERR(bl); } @@ -436,7 +437,7 @@ static int ht16k33_probe(struct i2c_client *client) if (err) { dft_brightness = MAX_BRIGHTNESS; } else if (dft_brightness > MAX_BRIGHTNESS) { - dev_warn(&client->dev, + dev_warn(dev, "invalid default brightness level: %u, using %u\n", dft_brightness, MAX_BRIGHTNESS); dft_brightness = MAX_BRIGHTNESS; @@ -451,13 +452,13 @@ static int ht16k33_probe(struct i2c_client *client) if (!fbdev->buffer) return -ENOMEM; - fbdev->cache = devm_kmalloc(&client->dev, HT16K33_FB_SIZE, GFP_KERNEL); + fbdev->cache = devm_kmalloc(dev, HT16K33_FB_SIZE, GFP_KERNEL); if (!fbdev->cache) { err = -ENOMEM; goto err_fbdev_buffer; } - fbdev->info = framebuffer_alloc(0, &client->dev); + fbdev->info = framebuffer_alloc(0, dev); if (!fbdev->info) { err = -ENOMEM; goto err_fbdev_buffer; @@ -466,7 +467,7 @@ static int ht16k33_probe(struct i2c_client *client) err = of_property_read_u32(node, "refresh-rate-hz", &fbdev->refresh_rate); if (err) { - dev_err(&client->dev, "refresh rate not specified\n"); + dev_err(dev, "refresh rate not specified\n"); goto err_fbdev_info; } fb_bl_default_curve(fbdev->info, 0, MIN_BRIGHTNESS, MAX_BRIGHTNESS); From 85d93b165f81ffb93745325efdf3df2b2df1a0e6 Mon Sep 17 00:00:00 2001 From: Geert Uytterhoeven Date: Tue, 19 Oct 2021 16:45:14 +0200 Subject: [PATCH 15/26] auxdisplay: ht16k33: Move delayed work Move delayed_work from ht16k33_fbdev to ht16k33_priv, as it is not specific to dot-matrix displays, but common to all display types. Signed-off-by: Geert Uytterhoeven Acked-by: Robin van der Gracht Signed-off-by: Miguel Ojeda --- drivers/auxdisplay/ht16k33.c | 15 +++++++-------- 1 file changed, 7 insertions(+), 8 deletions(-) diff --git a/drivers/auxdisplay/ht16k33.c b/drivers/auxdisplay/ht16k33.c index dcf530a9390b..b50cbf7e57ba 100644 --- a/drivers/auxdisplay/ht16k33.c +++ b/drivers/auxdisplay/ht16k33.c @@ -65,11 +65,11 @@ struct ht16k33_fbdev { uint32_t refresh_rate; uint8_t *buffer; uint8_t *cache; - struct delayed_work work; }; struct ht16k33_priv { struct i2c_client *client; + struct delayed_work work; struct ht16k33_keypad keypad; struct ht16k33_fbdev fbdev; }; @@ -117,7 +117,7 @@ static void ht16k33_fb_queue(struct ht16k33_priv *priv) { struct ht16k33_fbdev *fbdev = &priv->fbdev; - schedule_delayed_work(&fbdev->work, HZ / fbdev->refresh_rate); + schedule_delayed_work(&priv->work, HZ / fbdev->refresh_rate); } /* @@ -125,10 +125,9 @@ static void ht16k33_fb_queue(struct ht16k33_priv *priv) */ static void ht16k33_fb_update(struct work_struct *work) { - struct ht16k33_fbdev *fbdev = - container_of(work, struct ht16k33_fbdev, work.work); - struct ht16k33_priv *priv = - container_of(fbdev, struct ht16k33_priv, fbdev); + struct ht16k33_priv *priv = container_of(work, struct ht16k33_priv, + work.work); + struct ht16k33_fbdev *fbdev = &priv->fbdev; uint8_t *p1, *p2; int len, pos = 0, first = -1; @@ -472,7 +471,7 @@ static int ht16k33_probe(struct i2c_client *client) } fb_bl_default_curve(fbdev->info, 0, MIN_BRIGHTNESS, MAX_BRIGHTNESS); - INIT_DELAYED_WORK(&fbdev->work, ht16k33_fb_update); + INIT_DELAYED_WORK(&priv->work, ht16k33_fb_update); fbdev->info->fbops = &ht16k33_fb_ops; fbdev->info->screen_base = (char __iomem *) fbdev->buffer; fbdev->info->screen_size = HT16K33_FB_SIZE; @@ -512,7 +511,7 @@ static int ht16k33_remove(struct i2c_client *client) struct ht16k33_priv *priv = i2c_get_clientdata(client); struct ht16k33_fbdev *fbdev = &priv->fbdev; - cancel_delayed_work_sync(&fbdev->work); + cancel_delayed_work_sync(&priv->work); unregister_framebuffer(fbdev->info); framebuffer_release(fbdev->info); free_page((unsigned long) fbdev->buffer); From b37cc2202705a791ab0e3d1ce72789ae97566484 Mon Sep 17 00:00:00 2001 From: Geert Uytterhoeven Date: Tue, 19 Oct 2021 16:45:15 +0200 Subject: [PATCH 16/26] auxdisplay: ht16k33: Extract ht16k33_brightness_set() Extract brightness handling into a helper function, so it can be called from multiple places. Signed-off-by: Geert Uytterhoeven Reviewed-by: Robin van der Gracht Signed-off-by: Miguel Ojeda --- drivers/auxdisplay/ht16k33.c | 25 +++++++++++++++++++------ 1 file changed, 19 insertions(+), 6 deletions(-) diff --git a/drivers/auxdisplay/ht16k33.c b/drivers/auxdisplay/ht16k33.c index b50cbf7e57ba..60e616c0e932 100644 --- a/drivers/auxdisplay/ht16k33.c +++ b/drivers/auxdisplay/ht16k33.c @@ -113,6 +113,22 @@ static int ht16k33_display_off(struct ht16k33_priv *priv) return i2c_smbus_write_byte(priv->client, REG_DISPLAY_SETUP); } +static int ht16k33_brightness_set(struct ht16k33_priv *priv, + unsigned int brightness) +{ + int err; + + if (brightness == 0) + return ht16k33_display_off(priv); + + err = ht16k33_display_on(priv); + if (err) + return err; + + return i2c_smbus_write_byte(priv->client, + REG_BRIGHTNESS | (brightness - 1)); +} + static void ht16k33_fb_queue(struct ht16k33_priv *priv) { struct ht16k33_fbdev *fbdev = &priv->fbdev; @@ -197,13 +213,10 @@ static int ht16k33_bl_update_status(struct backlight_device *bl) if (bl->props.power != FB_BLANK_UNBLANK || bl->props.fb_blank != FB_BLANK_UNBLANK || - bl->props.state & BL_CORE_FBBLANK || brightness == 0) { - return ht16k33_display_off(priv); - } + bl->props.state & BL_CORE_FBBLANK) + brightness = 0; - ht16k33_display_on(priv); - return i2c_smbus_write_byte(priv->client, - REG_BRIGHTNESS | (brightness - 1)); + return ht16k33_brightness_set(priv, brightness); } static int ht16k33_bl_check_fb(struct backlight_device *bl, struct fb_info *fi) From fcbb3c356eae05812fcefc8eda8f49034dbbb8ed Mon Sep 17 00:00:00 2001 From: Geert Uytterhoeven Date: Tue, 19 Oct 2021 16:45:16 +0200 Subject: [PATCH 17/26] auxdisplay: ht16k33: Extract frame buffer probing Extract all frame buffer (including backlight) probing into ht16k33_fbdev_probe(). Call ht16k33_fbdev_probe() after ht16k33_keypad_probe(), as the latter does not need any manual cleanup in the probe error path. Signed-off-by: Geert Uytterhoeven Reviewed-by: Robin van der Gracht Signed-off-by: Miguel Ojeda --- drivers/auxdisplay/ht16k33.c | 101 ++++++++++++++++++----------------- 1 file changed, 53 insertions(+), 48 deletions(-) diff --git a/drivers/auxdisplay/ht16k33.c b/drivers/auxdisplay/ht16k33.c index 60e616c0e932..8993d2790910 100644 --- a/drivers/auxdisplay/ht16k33.c +++ b/drivers/auxdisplay/ht16k33.c @@ -404,33 +404,13 @@ static int ht16k33_keypad_probe(struct i2c_client *client, return input_register_device(keypad->dev); } -static int ht16k33_probe(struct i2c_client *client) +static int ht16k33_fbdev_probe(struct device *dev, struct ht16k33_priv *priv, + uint32_t brightness) { - int err; - uint32_t dft_brightness; - struct backlight_device *bl; + struct ht16k33_fbdev *fbdev = &priv->fbdev; struct backlight_properties bl_props; - struct ht16k33_priv *priv; - struct ht16k33_fbdev *fbdev; - struct device *dev = &client->dev; - struct device_node *node = dev->of_node; - - if (!i2c_check_functionality(client->adapter, I2C_FUNC_I2C)) { - dev_err(dev, "i2c_check_functionality error\n"); - return -EIO; - } - - priv = devm_kzalloc(dev, sizeof(*priv), GFP_KERNEL); - if (!priv) - return -ENOMEM; - - priv->client = client; - i2c_set_clientdata(client, priv); - fbdev = &priv->fbdev; - - err = ht16k33_initialize(priv); - if (err) - return err; + struct backlight_device *bl; + int err; /* Backlight */ memset(&bl_props, 0, sizeof(struct backlight_properties)); @@ -444,18 +424,7 @@ static int ht16k33_probe(struct i2c_client *client) return PTR_ERR(bl); } - err = of_property_read_u32(node, "default-brightness-level", - &dft_brightness); - if (err) { - dft_brightness = MAX_BRIGHTNESS; - } else if (dft_brightness > MAX_BRIGHTNESS) { - dev_warn(dev, - "invalid default brightness level: %u, using %u\n", - dft_brightness, MAX_BRIGHTNESS); - dft_brightness = MAX_BRIGHTNESS; - } - - bl->props.brightness = dft_brightness; + bl->props.brightness = brightness; ht16k33_bl_update_status(bl); /* Framebuffer (2 bytes per column) */ @@ -476,8 +445,8 @@ static int ht16k33_probe(struct i2c_client *client) goto err_fbdev_buffer; } - err = of_property_read_u32(node, "refresh-rate-hz", - &fbdev->refresh_rate); + err = of_property_read_u32(dev->of_node, "refresh-rate-hz", + &fbdev->refresh_rate); if (err) { dev_err(dev, "refresh rate not specified\n"); goto err_fbdev_info; @@ -499,18 +468,9 @@ static int ht16k33_probe(struct i2c_client *client) if (err) goto err_fbdev_info; - /* Keypad */ - if (client->irq > 0) { - err = ht16k33_keypad_probe(client, &priv->keypad); - if (err) - goto err_fbdev_unregister; - } - ht16k33_fb_queue(priv); return 0; -err_fbdev_unregister: - unregister_framebuffer(fbdev->info); err_fbdev_info: framebuffer_release(fbdev->info); err_fbdev_buffer: @@ -519,6 +479,51 @@ err_fbdev_buffer: return err; } +static int ht16k33_probe(struct i2c_client *client) +{ + struct device *dev = &client->dev; + struct ht16k33_priv *priv; + uint32_t dft_brightness; + int err; + + if (!i2c_check_functionality(client->adapter, I2C_FUNC_I2C)) { + dev_err(dev, "i2c_check_functionality error\n"); + return -EIO; + } + + priv = devm_kzalloc(dev, sizeof(*priv), GFP_KERNEL); + if (!priv) + return -ENOMEM; + + priv->client = client; + i2c_set_clientdata(client, priv); + + err = ht16k33_initialize(priv); + if (err) + return err; + + err = of_property_read_u32(dev->of_node, "default-brightness-level", + &dft_brightness); + if (err) { + dft_brightness = MAX_BRIGHTNESS; + } else if (dft_brightness > MAX_BRIGHTNESS) { + dev_warn(dev, + "invalid default brightness level: %u, using %u\n", + dft_brightness, MAX_BRIGHTNESS); + dft_brightness = MAX_BRIGHTNESS; + } + + /* Keypad */ + if (client->irq > 0) { + err = ht16k33_keypad_probe(client, &priv->keypad); + if (err) + return err; + } + + /* Frame Buffer Display */ + return ht16k33_fbdev_probe(dev, priv, dft_brightness); +} + static int ht16k33_remove(struct i2c_client *client) { struct ht16k33_priv *priv = i2c_get_clientdata(client); From a0428724cf9bd73185321274a5918e9d43778967 Mon Sep 17 00:00:00 2001 From: Geert Uytterhoeven Date: Tue, 19 Oct 2021 16:45:17 +0200 Subject: [PATCH 18/26] auxdisplay: ht16k33: Add support for segment displays The Holtek HT16K33 LED controller is not only used for driving dot-matrix displays, but also for driving segment displays. Add support for 4-digit 7-segment and quad 14-segment alphanumeric displays, like the Adafruit 7-segment and 14-segment display backpack and FeatherWing expansion boards. Use the character line display core support to display a message, which will be scrolled if it doesn't fit. Signed-off-by: Geert Uytterhoeven Acked-by: Robin van der Gracht Signed-off-by: Miguel Ojeda --- drivers/auxdisplay/Kconfig | 1 + drivers/auxdisplay/ht16k33.c | 196 +++++++++++++++++++++++++++++++++-- 2 files changed, 190 insertions(+), 7 deletions(-) diff --git a/drivers/auxdisplay/Kconfig b/drivers/auxdisplay/Kconfig index b41fdc5f7bf7..42fc7b155de0 100644 --- a/drivers/auxdisplay/Kconfig +++ b/drivers/auxdisplay/Kconfig @@ -176,6 +176,7 @@ config HT16K33 select FB_SYS_IMAGEBLIT select INPUT_MATRIXKMAP select FB_BACKLIGHT + select LINEDISP help Say yes here to add support for Holtek HT16K33, RAM mapping 16*8 LED controller driver with keyscan. diff --git a/drivers/auxdisplay/ht16k33.c b/drivers/auxdisplay/ht16k33.c index 8993d2790910..9ce9271d5e3d 100644 --- a/drivers/auxdisplay/ht16k33.c +++ b/drivers/auxdisplay/ht16k33.c @@ -5,6 +5,7 @@ * Author: Robin van der Gracht * * Copyright: (C) 2016 Protonic Holland. + * Copyright (C) 2021 Glider bv */ #include @@ -20,6 +21,13 @@ #include #include +#include +#include + +#include + +#include "line-display.h" + /* Registers */ #define REG_SYSTEM_SETUP 0x20 #define REG_SYSTEM_SETUP_OSC_ON BIT(0) @@ -47,6 +55,12 @@ #define BYTES_PER_ROW (HT16K33_MATRIX_LED_MAX_ROWS / 8) #define HT16K33_FB_SIZE (HT16K33_MATRIX_LED_MAX_COLS * BYTES_PER_ROW) +enum display_type { + DISP_MATRIX = 0, + DISP_QUAD_7SEG, + DISP_QUAD_14SEG, +}; + struct ht16k33_keypad { struct i2c_client *client; struct input_dev *dev; @@ -67,11 +81,25 @@ struct ht16k33_fbdev { uint8_t *cache; }; +struct ht16k33_seg { + struct linedisp linedisp; + union { + struct seg7_conversion_map seg7; + struct seg14_conversion_map seg14; + } map; + unsigned int map_size; + char curr[4]; +}; + struct ht16k33_priv { struct i2c_client *client; struct delayed_work work; struct ht16k33_keypad keypad; - struct ht16k33_fbdev fbdev; + union { + struct ht16k33_fbdev fbdev; + struct ht16k33_seg seg; + }; + enum display_type type; }; static const struct fb_fix_screeninfo ht16k33_fb_fix = { @@ -101,6 +129,33 @@ static const struct fb_var_screeninfo ht16k33_fb_var = { .vmode = FB_VMODE_NONINTERLACED, }; +static const SEG7_DEFAULT_MAP(initial_map_seg7); +static const SEG14_DEFAULT_MAP(initial_map_seg14); + +static ssize_t map_seg_show(struct device *dev, struct device_attribute *attr, + char *buf) +{ + struct ht16k33_priv *priv = dev_get_drvdata(dev); + + memcpy(buf, &priv->seg.map, priv->seg.map_size); + return priv->seg.map_size; +} + +static ssize_t map_seg_store(struct device *dev, struct device_attribute *attr, + const char *buf, size_t cnt) +{ + struct ht16k33_priv *priv = dev_get_drvdata(dev); + + if (cnt != priv->seg.map_size) + return -EINVAL; + + memcpy(&priv->seg.map, buf, cnt); + return cnt; +} + +static DEVICE_ATTR(map_seg7, 0644, map_seg_show, map_seg_store); +static DEVICE_ATTR(map_seg14, 0644, map_seg_show, map_seg_store); + static int ht16k33_display_on(struct ht16k33_priv *priv) { uint8_t data = REG_DISPLAY_SETUP | REG_DISPLAY_SETUP_ON; @@ -335,6 +390,51 @@ static void ht16k33_keypad_stop(struct input_dev *dev) disable_irq(keypad->client->irq); } +static void ht16k33_linedisp_update(struct linedisp *linedisp) +{ + struct ht16k33_priv *priv = container_of(linedisp, struct ht16k33_priv, + seg.linedisp); + + schedule_delayed_work(&priv->work, 0); +} + +static void ht16k33_seg7_update(struct work_struct *work) +{ + struct ht16k33_priv *priv = container_of(work, struct ht16k33_priv, + work.work); + struct ht16k33_seg *seg = &priv->seg; + char *s = seg->curr; + uint8_t buf[9]; + + buf[0] = map_to_seg7(&seg->map.seg7, *s++); + buf[1] = 0; + buf[2] = map_to_seg7(&seg->map.seg7, *s++); + buf[3] = 0; + buf[4] = 0; + buf[5] = 0; + buf[6] = map_to_seg7(&seg->map.seg7, *s++); + buf[7] = 0; + buf[8] = map_to_seg7(&seg->map.seg7, *s++); + + i2c_smbus_write_i2c_block_data(priv->client, 0, ARRAY_SIZE(buf), buf); +} + +static void ht16k33_seg14_update(struct work_struct *work) +{ + struct ht16k33_priv *priv = container_of(work, struct ht16k33_priv, + work.work); + struct ht16k33_seg *seg = &priv->seg; + char *s = seg->curr; + uint8_t buf[8]; + + put_unaligned_le16(map_to_seg14(&seg->map.seg14, *s++), buf); + put_unaligned_le16(map_to_seg14(&seg->map.seg14, *s++), buf + 2); + put_unaligned_le16(map_to_seg14(&seg->map.seg14, *s++), buf + 4); + put_unaligned_le16(map_to_seg14(&seg->map.seg14, *s++), buf + 6); + + i2c_smbus_write_i2c_block_data(priv->client, 0, ARRAY_SIZE(buf), buf); +} + static int ht16k33_keypad_probe(struct i2c_client *client, struct ht16k33_keypad *keypad) { @@ -479,9 +579,56 @@ err_fbdev_buffer: return err; } +static int ht16k33_seg_probe(struct device *dev, struct ht16k33_priv *priv, + uint32_t brightness) +{ + struct ht16k33_seg *seg = &priv->seg; + int err; + + err = ht16k33_brightness_set(priv, brightness); + if (err) + return err; + + switch (priv->type) { + case DISP_MATRIX: + /* not handled here */ + err = -EINVAL; + break; + + case DISP_QUAD_7SEG: + INIT_DELAYED_WORK(&priv->work, ht16k33_seg7_update); + seg->map.seg7 = initial_map_seg7; + seg->map_size = sizeof(seg->map.seg7); + err = device_create_file(dev, &dev_attr_map_seg7); + break; + + case DISP_QUAD_14SEG: + INIT_DELAYED_WORK(&priv->work, ht16k33_seg14_update); + seg->map.seg14 = initial_map_seg14; + seg->map_size = sizeof(seg->map.seg14); + err = device_create_file(dev, &dev_attr_map_seg14); + break; + } + if (err) + return err; + + err = linedisp_register(&seg->linedisp, dev, 4, seg->curr, + ht16k33_linedisp_update); + if (err) + goto err_remove_map_file; + + return 0; + +err_remove_map_file: + device_remove_file(dev, &dev_attr_map_seg7); + device_remove_file(dev, &dev_attr_map_seg14); + return err; +} + static int ht16k33_probe(struct i2c_client *client) { struct device *dev = &client->dev; + const struct of_device_id *id; struct ht16k33_priv *priv; uint32_t dft_brightness; int err; @@ -496,6 +643,9 @@ static int ht16k33_probe(struct i2c_client *client) return -ENOMEM; priv->client = client; + id = i2c_of_match_device(dev->driver->of_match_table, client); + if (id) + priv->type = (uintptr_t)id->data; i2c_set_clientdata(client, priv); err = ht16k33_initialize(priv); @@ -520,8 +670,19 @@ static int ht16k33_probe(struct i2c_client *client) return err; } - /* Frame Buffer Display */ - return ht16k33_fbdev_probe(dev, priv, dft_brightness); + switch (priv->type) { + case DISP_MATRIX: + /* Frame Buffer Display */ + err = ht16k33_fbdev_probe(dev, priv, dft_brightness); + break; + + case DISP_QUAD_7SEG: + case DISP_QUAD_14SEG: + /* Segment Display */ + err = ht16k33_seg_probe(dev, priv, dft_brightness); + break; + } + return err; } static int ht16k33_remove(struct i2c_client *client) @@ -530,9 +691,21 @@ static int ht16k33_remove(struct i2c_client *client) struct ht16k33_fbdev *fbdev = &priv->fbdev; cancel_delayed_work_sync(&priv->work); - unregister_framebuffer(fbdev->info); - framebuffer_release(fbdev->info); - free_page((unsigned long) fbdev->buffer); + + switch (priv->type) { + case DISP_MATRIX: + unregister_framebuffer(fbdev->info); + framebuffer_release(fbdev->info); + free_page((unsigned long)fbdev->buffer); + break; + + case DISP_QUAD_7SEG: + case DISP_QUAD_14SEG: + linedisp_unregister(&priv->seg.linedisp); + device_remove_file(&client->dev, &dev_attr_map_seg7); + device_remove_file(&client->dev, &dev_attr_map_seg14); + break; + } return 0; } @@ -544,7 +717,16 @@ static const struct i2c_device_id ht16k33_i2c_match[] = { MODULE_DEVICE_TABLE(i2c, ht16k33_i2c_match); static const struct of_device_id ht16k33_of_match[] = { - { .compatible = "holtek,ht16k33", }, + { + /* 0.56" 4-Digit 7-Segment FeatherWing Display (Red) */ + .compatible = "adafruit,3108", .data = (void *)DISP_QUAD_7SEG, + }, { + /* 0.54" Quad Alphanumeric FeatherWing Display (Red) */ + .compatible = "adafruit,3130", .data = (void *)DISP_QUAD_14SEG, + }, { + /* Generic, assumed Dot-Matrix Display */ + .compatible = "holtek,ht16k33", .data = (void *)DISP_MATRIX, + }, { } }; MODULE_DEVICE_TABLE(of, ht16k33_of_match); From 2904c01428e7e372bcfa4723a891669b2c55f1fb Mon Sep 17 00:00:00 2001 From: Geert Uytterhoeven Date: Tue, 19 Oct 2021 16:45:18 +0200 Subject: [PATCH 19/26] dt-bindings: auxdisplay: ht16k33: Document LED subnode Extend the Holtek HT16K33 LED controller Device Tree bindings with an LED subnode, conforming to the standard LED bindings. This allows the user to exert more control, like specifying LED color, function, and/or trigger, to extend LED functionality beyond a simple display backlight. Signed-off-by: Geert Uytterhoeven Reviewed-by: Rob Herring Signed-off-by: Miguel Ojeda --- .../bindings/auxdisplay/holtek,ht16k33.yaml | 12 ++++++++++++ 1 file changed, 12 insertions(+) diff --git a/Documentation/devicetree/bindings/auxdisplay/holtek,ht16k33.yaml b/Documentation/devicetree/bindings/auxdisplay/holtek,ht16k33.yaml index 6baf1200c9d8..fc4873deb76f 100644 --- a/Documentation/devicetree/bindings/auxdisplay/holtek,ht16k33.yaml +++ b/Documentation/devicetree/bindings/auxdisplay/holtek,ht16k33.yaml @@ -48,6 +48,11 @@ properties: default: 16 description: Initial brightness level + led: + type: object + $ref: /schemas/leds/common.yaml# + unevaluatedProperties: false + required: - compatible - reg @@ -66,6 +71,7 @@ examples: - | #include #include + #include i2c1 { #address-cells = <1>; #size-cells = <0>; @@ -87,5 +93,11 @@ examples: , , ; + + led { + color = ; + function = LED_FUNCTION_BACKLIGHT; + linux,default-trigger = "backlight"; + }; }; }; From c223d9c636ed55ba8abaa94be329f92fe43d522d Mon Sep 17 00:00:00 2001 From: Geert Uytterhoeven Date: Tue, 19 Oct 2021 16:45:19 +0200 Subject: [PATCH 20/26] auxdisplay: ht16k33: Add LED support MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit Instantiate a single LED based on the "led" subnode in DT. This allows the user to control display brightness and blinking (backed by hardware support) through the LED class API and triggers, and exposes the display color. The LED will be named "auxdisplay::". When running in dot-matrix mode and if no "led" subnode is found, the driver falls back to the traditional backlight mode, to preserve backwards compatibility. Signed-off-by: Geert Uytterhoeven Reviewed-by: Marek Behún Reviewed-by: Robin van der Gracht Signed-off-by: Miguel Ojeda --- drivers/auxdisplay/Kconfig | 2 + drivers/auxdisplay/ht16k33.c | 126 ++++++++++++++++++++++++++++++----- 2 files changed, 112 insertions(+), 16 deletions(-) diff --git a/drivers/auxdisplay/Kconfig b/drivers/auxdisplay/Kconfig index 42fc7b155de0..e32ef7f9945d 100644 --- a/drivers/auxdisplay/Kconfig +++ b/drivers/auxdisplay/Kconfig @@ -176,6 +176,8 @@ config HT16K33 select FB_SYS_IMAGEBLIT select INPUT_MATRIXKMAP select FB_BACKLIGHT + select NEW_LEDS + select LEDS_CLASS select LINEDISP help Say yes here to add support for Holtek HT16K33, RAM mapping 16*8 diff --git a/drivers/auxdisplay/ht16k33.c b/drivers/auxdisplay/ht16k33.c index 9ce9271d5e3d..aef3dc87dc9f 100644 --- a/drivers/auxdisplay/ht16k33.c +++ b/drivers/auxdisplay/ht16k33.c @@ -18,6 +18,7 @@ #include #include #include +#include #include #include @@ -34,6 +35,10 @@ #define REG_DISPLAY_SETUP 0x80 #define REG_DISPLAY_SETUP_ON BIT(0) +#define REG_DISPLAY_SETUP_BLINK_OFF (0 << 1) +#define REG_DISPLAY_SETUP_BLINK_2HZ (1 << 1) +#define REG_DISPLAY_SETUP_BLINK_1HZ (2 << 1) +#define REG_DISPLAY_SETUP_BLINK_0HZ5 (3 << 1) #define REG_ROWINT_SET 0xA0 #define REG_ROWINT_SET_INT_EN BIT(0) @@ -94,12 +99,14 @@ struct ht16k33_seg { struct ht16k33_priv { struct i2c_client *client; struct delayed_work work; + struct led_classdev led; struct ht16k33_keypad keypad; union { struct ht16k33_fbdev fbdev; struct ht16k33_seg seg; }; enum display_type type; + uint8_t blink; }; static const struct fb_fix_screeninfo ht16k33_fb_fix = { @@ -158,7 +165,7 @@ static DEVICE_ATTR(map_seg14, 0644, map_seg_show, map_seg_store); static int ht16k33_display_on(struct ht16k33_priv *priv) { - uint8_t data = REG_DISPLAY_SETUP | REG_DISPLAY_SETUP_ON; + uint8_t data = REG_DISPLAY_SETUP | REG_DISPLAY_SETUP_ON | priv->blink; return i2c_smbus_write_byte(priv->client, data); } @@ -173,8 +180,10 @@ static int ht16k33_brightness_set(struct ht16k33_priv *priv, { int err; - if (brightness == 0) + if (brightness == 0) { + priv->blink = REG_DISPLAY_SETUP_BLINK_OFF; return ht16k33_display_off(priv); + } err = ht16k33_display_on(priv); if (err) @@ -184,6 +193,49 @@ static int ht16k33_brightness_set(struct ht16k33_priv *priv, REG_BRIGHTNESS | (brightness - 1)); } +static int ht16k33_brightness_set_blocking(struct led_classdev *led_cdev, + enum led_brightness brightness) +{ + struct ht16k33_priv *priv = container_of(led_cdev, struct ht16k33_priv, + led); + + return ht16k33_brightness_set(priv, brightness); +} + +static int ht16k33_blink_set(struct led_classdev *led_cdev, + unsigned long *delay_on, unsigned long *delay_off) +{ + struct ht16k33_priv *priv = container_of(led_cdev, struct ht16k33_priv, + led); + unsigned int delay; + uint8_t blink; + int err; + + if (!*delay_on && !*delay_off) { + blink = REG_DISPLAY_SETUP_BLINK_1HZ; + delay = 1000; + } else if (*delay_on <= 750) { + blink = REG_DISPLAY_SETUP_BLINK_2HZ; + delay = 500; + } else if (*delay_on <= 1500) { + blink = REG_DISPLAY_SETUP_BLINK_1HZ; + delay = 1000; + } else { + blink = REG_DISPLAY_SETUP_BLINK_0HZ5; + delay = 2000; + } + + err = i2c_smbus_write_byte(priv->client, + REG_DISPLAY_SETUP | REG_DISPLAY_SETUP_ON | + blink); + if (err) + return err; + + priv->blink = blink; + *delay_on = *delay_off = delay; + return 0; +} + static void ht16k33_fb_queue(struct ht16k33_priv *priv) { struct ht16k33_fbdev *fbdev = &priv->fbdev; @@ -435,6 +487,35 @@ static void ht16k33_seg14_update(struct work_struct *work) i2c_smbus_write_i2c_block_data(priv->client, 0, ARRAY_SIZE(buf), buf); } +static int ht16k33_led_probe(struct device *dev, struct led_classdev *led, + unsigned int brightness) +{ + struct led_init_data init_data = {}; + struct device_node *node; + int err; + + /* The LED is optional */ + node = of_get_child_by_name(dev->of_node, "led"); + if (!node) + return 0; + + init_data.fwnode = of_fwnode_handle(node); + init_data.devicename = "auxdisplay"; + init_data.devname_mandatory = true; + + led->brightness_set_blocking = ht16k33_brightness_set_blocking; + led->blink_set = ht16k33_blink_set; + led->flags = LED_CORE_SUSPENDRESUME; + led->brightness = brightness; + led->max_brightness = MAX_BRIGHTNESS; + + err = devm_led_classdev_register_ext(dev, led, &init_data); + if (err) + dev_err(dev, "Failed to register LED\n"); + + return err; +} + static int ht16k33_keypad_probe(struct i2c_client *client, struct ht16k33_keypad *keypad) { @@ -508,25 +589,33 @@ static int ht16k33_fbdev_probe(struct device *dev, struct ht16k33_priv *priv, uint32_t brightness) { struct ht16k33_fbdev *fbdev = &priv->fbdev; - struct backlight_properties bl_props; - struct backlight_device *bl; + struct backlight_device *bl = NULL; int err; - /* Backlight */ - memset(&bl_props, 0, sizeof(struct backlight_properties)); - bl_props.type = BACKLIGHT_RAW; - bl_props.max_brightness = MAX_BRIGHTNESS; + if (priv->led.dev) { + err = ht16k33_brightness_set(priv, brightness); + if (err) + return err; + } else { + /* backwards compatibility with DT lacking an led subnode */ + struct backlight_properties bl_props; - bl = devm_backlight_device_register(dev, DRIVER_NAME"-bl", dev, priv, - &ht16k33_bl_ops, &bl_props); - if (IS_ERR(bl)) { - dev_err(dev, "failed to register backlight\n"); - return PTR_ERR(bl); + memset(&bl_props, 0, sizeof(struct backlight_properties)); + bl_props.type = BACKLIGHT_RAW; + bl_props.max_brightness = MAX_BRIGHTNESS; + + bl = devm_backlight_device_register(dev, DRIVER_NAME"-bl", dev, + priv, &ht16k33_bl_ops, + &bl_props); + if (IS_ERR(bl)) { + dev_err(dev, "failed to register backlight\n"); + return PTR_ERR(bl); + } + + bl->props.brightness = brightness; + ht16k33_bl_update_status(bl); } - bl->props.brightness = brightness; - ht16k33_bl_update_status(bl); - /* Framebuffer (2 bytes per column) */ BUILD_BUG_ON(PAGE_SIZE < HT16K33_FB_SIZE); fbdev->buffer = (unsigned char *) get_zeroed_page(GFP_KERNEL); @@ -663,6 +752,11 @@ static int ht16k33_probe(struct i2c_client *client) dft_brightness = MAX_BRIGHTNESS; } + /* LED */ + err = ht16k33_led_probe(dev, &priv->led, dft_brightness); + if (err) + return err; + /* Keypad */ if (client->irq > 0) { err = ht16k33_keypad_probe(client, &priv->keypad); From 5d343f7c458caf4d4ff050617f539ff4667c8253 Mon Sep 17 00:00:00 2001 From: Geert Uytterhoeven Date: Tue, 19 Oct 2021 16:45:20 +0200 Subject: [PATCH 21/26] auxdisplay: ht16k33: Make use of device properties MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit The device property API allows drivers to gather device resources from different sources, such as ACPI, and lift the dependency on Device Tree. Convert the driver to unleash the power of the device property API. Suggested-by: Marek Behún Signed-off-by: Geert Uytterhoeven Reviewed-by: Andy Shevchenko Acked-by: Robin van der Gracht Signed-off-by: Miguel Ojeda --- drivers/auxdisplay/Kconfig | 2 +- drivers/auxdisplay/ht16k33.c | 27 ++++++++++++--------------- 2 files changed, 13 insertions(+), 16 deletions(-) diff --git a/drivers/auxdisplay/Kconfig b/drivers/auxdisplay/Kconfig index e32ef7f9945d..64012cda4d12 100644 --- a/drivers/auxdisplay/Kconfig +++ b/drivers/auxdisplay/Kconfig @@ -169,7 +169,7 @@ config IMG_ASCII_LCD config HT16K33 tristate "Holtek Ht16K33 LED controller with keyscan" - depends on FB && OF && I2C && INPUT + depends on FB && I2C && INPUT select FB_SYS_FOPS select FB_SYS_FILLRECT select FB_SYS_COPYAREA diff --git a/drivers/auxdisplay/ht16k33.c b/drivers/auxdisplay/ht16k33.c index aef3dc87dc9f..1134ae9f30de 100644 --- a/drivers/auxdisplay/ht16k33.c +++ b/drivers/auxdisplay/ht16k33.c @@ -12,7 +12,7 @@ #include #include #include -#include +#include #include #include #include @@ -491,15 +491,13 @@ static int ht16k33_led_probe(struct device *dev, struct led_classdev *led, unsigned int brightness) { struct led_init_data init_data = {}; - struct device_node *node; int err; /* The LED is optional */ - node = of_get_child_by_name(dev->of_node, "led"); - if (!node) + init_data.fwnode = device_get_named_child_node(dev, "led"); + if (!init_data.fwnode) return 0; - init_data.fwnode = of_fwnode_handle(node); init_data.devicename = "auxdisplay"; init_data.devname_mandatory = true; @@ -520,7 +518,6 @@ static int ht16k33_keypad_probe(struct i2c_client *client, struct ht16k33_keypad *keypad) { struct device *dev = &client->dev; - struct device_node *node = dev->of_node; u32 rows = HT16K33_MATRIX_KEYPAD_MAX_ROWS; u32 cols = HT16K33_MATRIX_KEYPAD_MAX_COLS; int err; @@ -539,17 +536,17 @@ static int ht16k33_keypad_probe(struct i2c_client *client, keypad->dev->open = ht16k33_keypad_start; keypad->dev->close = ht16k33_keypad_stop; - if (!of_get_property(node, "linux,no-autorepeat", NULL)) + if (!device_property_read_bool(dev, "linux,no-autorepeat")) __set_bit(EV_REP, keypad->dev->evbit); - err = of_property_read_u32(node, "debounce-delay-ms", - &keypad->debounce_ms); + err = device_property_read_u32(dev, "debounce-delay-ms", + &keypad->debounce_ms); if (err) { dev_err(dev, "key debounce delay not specified\n"); return err; } - err = matrix_keypad_parse_of_params(dev, &rows, &cols); + err = matrix_keypad_parse_properties(dev, &rows, &cols); if (err) return err; if (rows > HT16K33_MATRIX_KEYPAD_MAX_ROWS || @@ -634,8 +631,8 @@ static int ht16k33_fbdev_probe(struct device *dev, struct ht16k33_priv *priv, goto err_fbdev_buffer; } - err = of_property_read_u32(dev->of_node, "refresh-rate-hz", - &fbdev->refresh_rate); + err = device_property_read_u32(dev, "refresh-rate-hz", + &fbdev->refresh_rate); if (err) { dev_err(dev, "refresh rate not specified\n"); goto err_fbdev_info; @@ -741,8 +738,8 @@ static int ht16k33_probe(struct i2c_client *client) if (err) return err; - err = of_property_read_u32(dev->of_node, "default-brightness-level", - &dft_brightness); + err = device_property_read_u32(dev, "default-brightness-level", + &dft_brightness); if (err) { dft_brightness = MAX_BRIGHTNESS; } else if (dft_brightness > MAX_BRIGHTNESS) { @@ -830,7 +827,7 @@ static struct i2c_driver ht16k33_driver = { .remove = ht16k33_remove, .driver = { .name = DRIVER_NAME, - .of_match_table = of_match_ptr(ht16k33_of_match), + .of_match_table = ht16k33_of_match, }, .id_table = ht16k33_i2c_match, }; From 83bb3d512fc256cf3bbfb0aa961bc025a561d31e Mon Sep 17 00:00:00 2001 From: Mianhan Liu Date: Wed, 29 Sep 2021 03:21:42 +0800 Subject: [PATCH 22/26] auxdisplay: cfag12864bfb: remove superfluous header files cfag12864bfb.c doesn't use any macro or function declared in linux/delay.h, linux/string.h and linux/uaccess.h. Thus, these files can be removed from cfag12864bfb.c safely without affecting the compilation. Signed-off-by: Mianhan Liu [reworded] Signed-off-by: Miguel Ojeda --- drivers/auxdisplay/cfag12864bfb.c | 3 --- 1 file changed, 3 deletions(-) diff --git a/drivers/auxdisplay/cfag12864bfb.c b/drivers/auxdisplay/cfag12864bfb.c index d66821adf453..9e6681f19dc4 100644 --- a/drivers/auxdisplay/cfag12864bfb.c +++ b/drivers/auxdisplay/cfag12864bfb.c @@ -12,13 +12,10 @@ #include #include #include -#include #include #include #include #include -#include -#include #include #define CFAG12864BFB_NAME "cfag12864bfb" From 2b7ea42e7e29cc6c96f255a5c5289630ca612be0 Mon Sep 17 00:00:00 2001 From: Mianhan Liu Date: Wed, 29 Sep 2021 03:06:44 +0800 Subject: [PATCH 23/26] auxdisplay: ks0108: remove superfluous header files ks0108.c doesn't use any macro or function declared in linux/fs.h, linux/io.h and linux/uaccess.h. Thus, these files can be removed from ks0108.c safely without affecting the compilation. Signed-off-by: Mianhan Liu [reworded] Signed-off-by: Miguel Ojeda --- drivers/auxdisplay/ks0108.c | 3 --- 1 file changed, 3 deletions(-) diff --git a/drivers/auxdisplay/ks0108.c b/drivers/auxdisplay/ks0108.c index e871b94a1911..234f9dbe6e30 100644 --- a/drivers/auxdisplay/ks0108.c +++ b/drivers/auxdisplay/ks0108.c @@ -15,10 +15,7 @@ #include #include #include -#include -#include #include -#include #include #define KS0108_NAME "ks0108" From 1515b849f726f60dfff5c0bde2b0713cac26dd6c Mon Sep 17 00:00:00 2001 From: Mianhan Liu Date: Wed, 29 Sep 2021 03:15:09 +0800 Subject: [PATCH 24/26] auxdisplay: ht16k33: remove superfluous header files ht16k33.c doesn't use any macro or function declared in linux/slab.h. Thus, these files can be removed from ht16k33.c safely without affecting the compilation. Signed-off-by: Mianhan Liu Acked-by: Robin van der Gracht [reworded] Signed-off-by: Miguel Ojeda --- drivers/auxdisplay/ht16k33.c | 1 - 1 file changed, 1 deletion(-) diff --git a/drivers/auxdisplay/ht16k33.c b/drivers/auxdisplay/ht16k33.c index 1134ae9f30de..4fab3b2c7023 100644 --- a/drivers/auxdisplay/ht16k33.c +++ b/drivers/auxdisplay/ht16k33.c @@ -14,7 +14,6 @@ #include #include #include -#include #include #include #include From 4e5d74fc6b044c4b0fa5b661e0a8652f08743223 Mon Sep 17 00:00:00 2001 From: Huiquan Deng Date: Wed, 28 Jul 2021 23:39:10 -0700 Subject: [PATCH 25/26] auxdisplay: cfag12864bfb: code indent should use tabs where possible Resolves the checkpatch error. Signed-off-by: Huiquan Deng [reworded and avoid moving the line] Signed-off-by: Miguel Ojeda --- drivers/auxdisplay/cfag12864bfb.c | 6 +++--- 1 file changed, 3 insertions(+), 3 deletions(-) diff --git a/drivers/auxdisplay/cfag12864bfb.c b/drivers/auxdisplay/cfag12864bfb.c index 9e6681f19dc4..0df474506fb9 100644 --- a/drivers/auxdisplay/cfag12864bfb.c +++ b/drivers/auxdisplay/cfag12864bfb.c @@ -38,8 +38,8 @@ static const struct fb_var_screeninfo cfag12864bfb_var = { .yres_virtual = CFAG12864B_HEIGHT, .bits_per_pixel = 1, .red = { 0, 1, 0 }, - .green = { 0, 1, 0 }, - .blue = { 0, 1, 0 }, + .green = { 0, 1, 0 }, + .blue = { 0, 1, 0 }, .left_margin = 0, .right_margin = 0, .upper_margin = 0, @@ -67,7 +67,7 @@ static const struct fb_ops cfag12864bfb_ops = { static int cfag12864bfb_probe(struct platform_device *device) { int ret = -EINVAL; - struct fb_info *info = framebuffer_alloc(0, &device->dev); + struct fb_info *info = framebuffer_alloc(0, &device->dev); if (!info) goto none; From 97fbb29fc1ebde6ce362e3d0a9473d4c6dec7442 Mon Sep 17 00:00:00 2001 From: Geert Uytterhoeven Date: Wed, 11 Aug 2021 10:57:08 +0200 Subject: [PATCH 26/26] MAINTAINERS: Add DT Bindings for Auxiliary Display Drivers The "AUXILIARY DISPLAY DRIVERS" section lacks the related DT bindings. Add them. Signed-off-by: Geert Uytterhoeven Signed-off-by: Miguel Ojeda --- MAINTAINERS | 1 + 1 file changed, 1 insertion(+) diff --git a/MAINTAINERS b/MAINTAINERS index 8d118d7957d2..d3eb1dad2a3b 100644 --- a/MAINTAINERS +++ b/MAINTAINERS @@ -3125,6 +3125,7 @@ F: lib/*audit.c AUXILIARY DISPLAY DRIVERS M: Miguel Ojeda S: Maintained +F: Documentation/devicetree/bindings/auxdisplay/ F: drivers/auxdisplay/ F: include/linux/cfag12864b.h