diff --git a/MAINTAINERS b/MAINTAINERS index d516295978a4..5474397d1d18 100644 --- a/MAINTAINERS +++ b/MAINTAINERS @@ -12285,6 +12285,13 @@ S: Maintained F: Documentation/devicetree/bindings/pinctrl/loongson,ls2k-pinctrl.yaml F: drivers/pinctrl/pinctrl-loongson2.c +LOONGSON-2 SOC SERIES THERMAL DRIVER +M: zhanghongchen +M: Yinbo Zhu +L: linux-pm@vger.kernel.org +S: Maintained +F: drivers/thermal/loongson2_thermal.c + LSILOGIC MPT FUSION DRIVERS (FC/SAS/SPI) M: Sathya Prakash M: Sreekanth Reddy diff --git a/drivers/thermal/Kconfig b/drivers/thermal/Kconfig index 19a4b33cb564..c81a00fbca7d 100644 --- a/drivers/thermal/Kconfig +++ b/drivers/thermal/Kconfig @@ -510,4 +510,16 @@ config KHADAS_MCU_FAN_THERMAL If you say yes here you get support for the FAN controlled by the Microcontroller found on the Khadas VIM boards. +config LOONGSON2_THERMAL + tristate "Loongson-2 SoC series thermal driver" + depends on LOONGARCH || COMPILE_TEST + depends on OF + help + Support for Thermal driver found on Loongson-2 SoC series platforms. + The thermal driver realizes get_temp and set_trips function, which + are used to obtain the temperature of the current node and set the + temperature range to trigger the interrupt. When the input temperature + is higher than the high temperature threshold or lower than the low + temperature threshold, the interrupt will occur. + endif diff --git a/drivers/thermal/Makefile b/drivers/thermal/Makefile index 058664bc3ec0..c934cab309ae 100644 --- a/drivers/thermal/Makefile +++ b/drivers/thermal/Makefile @@ -63,3 +63,4 @@ obj-$(CONFIG_UNIPHIER_THERMAL) += uniphier_thermal.o obj-$(CONFIG_AMLOGIC_THERMAL) += amlogic_thermal.o obj-$(CONFIG_SPRD_THERMAL) += sprd_thermal.o obj-$(CONFIG_KHADAS_MCU_FAN_THERMAL) += khadas_mcu_fan.o +obj-$(CONFIG_LOONGSON2_THERMAL) += loongson2_thermal.o diff --git a/drivers/thermal/loongson2_thermal.c b/drivers/thermal/loongson2_thermal.c new file mode 100644 index 000000000000..133098dc0854 --- /dev/null +++ b/drivers/thermal/loongson2_thermal.c @@ -0,0 +1,169 @@ +// SPDX-License-Identifier: GPL-2.0+ +/* + * Author: zhanghongchen + * Yinbo Zhu + * Copyright (C) 2022-2023 Loongson Technology Corporation Limited + */ + +#include +#include +#include +#include +#include +#include +#include +#include +#include "thermal_hwmon.h" + +#define LOONGSON2_MAX_SENSOR_SEL_NUM 3 + +#define LOONGSON2_THSENS_CTRL_HI_REG 0x0 +#define LOONGSON2_THSENS_CTRL_LOW_REG 0x8 +#define LOONGSON2_THSENS_STATUS_REG 0x10 +#define LOONGSON2_THSENS_OUT_REG 0x14 + +#define LOONGSON2_THSENS_INT_LO BIT(0) +#define LOONGSON2_THSENS_INT_HIGH BIT(1) +#define LOONGSON2_THSENS_OUT_MASK 0xFF + +struct loongson2_thermal_chip_data { + unsigned int thermal_sensor_sel; +}; + +struct loongson2_thermal_data { + void __iomem *regs; + const struct loongson2_thermal_chip_data *chip_data; +}; + +static int loongson2_thermal_set(struct loongson2_thermal_data *data, + int low, int high, bool enable) +{ + u64 reg_ctrl = 0; + int reg_off = data->chip_data->thermal_sensor_sel * 2; + + low = clamp(-40, low, high); + high = clamp(125, low, high); + + low += HECTO; + high += HECTO; + + reg_ctrl = low; + reg_ctrl |= enable ? 0x100 : 0; + writew(reg_ctrl, data->regs + LOONGSON2_THSENS_CTRL_LOW_REG + reg_off); + + reg_ctrl = high; + reg_ctrl |= enable ? 0x100 : 0; + writew(reg_ctrl, data->regs + LOONGSON2_THSENS_CTRL_HI_REG + reg_off); + + return 0; +} + +static int loongson2_thermal_get_temp(struct thermal_zone_device *tz, int *temp) +{ + u32 reg_val; + struct loongson2_thermal_data *data = thermal_zone_device_priv(tz); + + reg_val = readl(data->regs + LOONGSON2_THSENS_OUT_REG); + *temp = ((reg_val & LOONGSON2_THSENS_OUT_MASK) - HECTO) * KILO; + + return 0; +} + +static irqreturn_t loongson2_thermal_irq_thread(int irq, void *dev) +{ + struct thermal_zone_device *tzd = dev; + struct loongson2_thermal_data *data = thermal_zone_device_priv(tzd); + + writeb(LOONGSON2_THSENS_INT_LO | LOONGSON2_THSENS_INT_HIGH, data->regs + + LOONGSON2_THSENS_STATUS_REG); + + thermal_zone_device_update(tzd, THERMAL_EVENT_UNSPECIFIED); + + return IRQ_HANDLED; +} + +static int loongson2_thermal_set_trips(struct thermal_zone_device *tz, int low, int high) +{ + struct loongson2_thermal_data *data = thermal_zone_device_priv(tz); + + return loongson2_thermal_set(data, low/MILLI, high/MILLI, true); +} + +static const struct thermal_zone_device_ops loongson2_of_thermal_ops = { + .get_temp = loongson2_thermal_get_temp, + .set_trips = loongson2_thermal_set_trips, +}; + +static int loongson2_thermal_probe(struct platform_device *pdev) +{ + struct device *dev = &pdev->dev; + struct loongson2_thermal_data *data; + struct thermal_zone_device *tzd; + int ret, irq, i; + + data = devm_kzalloc(dev, sizeof(*data), GFP_KERNEL); + if (!data) + return -ENOMEM; + + data->chip_data = device_get_match_data(dev); + + data->regs = devm_platform_ioremap_resource(pdev, 0); + if (IS_ERR(data->regs)) + return PTR_ERR(data->regs); + + irq = platform_get_irq(pdev, 0); + if (irq < 0) + return irq; + + writeb(LOONGSON2_THSENS_INT_LO | LOONGSON2_THSENS_INT_HIGH, data->regs + + LOONGSON2_THSENS_STATUS_REG); + + loongson2_thermal_set(data, 0, 0, false); + + for (i = 0; i <= LOONGSON2_MAX_SENSOR_SEL_NUM; i++) { + tzd = devm_thermal_of_zone_register(dev, i, data, + &loongson2_of_thermal_ops); + + if (!IS_ERR(tzd)) + break; + + if (PTR_ERR(tzd) != ENODEV) + continue; + + return dev_err_probe(dev, PTR_ERR(tzd), "failed to register"); + } + + ret = devm_request_threaded_irq(dev, irq, NULL, loongson2_thermal_irq_thread, + IRQF_ONESHOT, "loongson2_thermal", tzd); + if (ret < 0) + return dev_err_probe(dev, ret, "failed to request alarm irq\n"); + + devm_thermal_add_hwmon_sysfs(dev, tzd); + + return 0; +} + +static const struct loongson2_thermal_chip_data loongson2_thermal_ls2k1000_data = { + .thermal_sensor_sel = 0, +}; + +static const struct of_device_id of_loongson2_thermal_match[] = { + { + .compatible = "loongson,ls2k1000-thermal", + .data = &loongson2_thermal_ls2k1000_data, + }, + { /* end */ } +}; +MODULE_DEVICE_TABLE(of, of_loongson2_thermal_match); + +static struct platform_driver loongson2_thermal_driver = { + .driver = { + .name = "loongson2_thermal", + .of_match_table = of_loongson2_thermal_match, + }, + .probe = loongson2_thermal_probe, +}; +module_platform_driver(loongson2_thermal_driver); + +MODULE_DESCRIPTION("Loongson2 thermal driver"); +MODULE_LICENSE("GPL");